diff options
author | Yanhong Wang <yanhong.wang@starfivetech.com> | 2023-06-15 17:36:42 +0800 |
---|---|---|
committer | Leo Yu-Chi Liang <ycliang@andestech.com> | 2023-07-12 13:21:40 +0800 |
commit | e92ed065bad3d2728340c1a279f306c4b769eda1 (patch) | |
tree | 018fad89c056dbe6af86ef0c5c388b8d1f8b09fb /drivers/net/phy/motorcomm.c | |
parent | 8e21064cb3452950b09301baec06d86e37342471 (diff) | |
download | u-boot-e92ed065bad3d2728340c1a279f306c4b769eda1.zip u-boot-e92ed065bad3d2728340c1a279f306c4b769eda1.tar.gz u-boot-e92ed065bad3d2728340c1a279f306c4b769eda1.tar.bz2 |
net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy
Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have
verified the driver on StarFive VisionFive2 board.
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'drivers/net/phy/motorcomm.c')
-rw-r--r-- | drivers/net/phy/motorcomm.c | 437 |
1 files changed, 437 insertions, 0 deletions
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c new file mode 100644 index 0000000..e822fd7 --- /dev/null +++ b/drivers/net/phy/motorcomm.c @@ -0,0 +1,437 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Motorcomm 8531 PHY driver. + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <phy.h> +#include <linux/bitfield.h> + +#define PHY_ID_YT8531 0x4f51e91b +#define PHY_ID_MASK GENMASK(31, 0) + +/* Extended Register's Address Offset Register */ +#define YTPHY_PAGE_SELECT 0x1E + +/* Extended Register's Data Register */ +#define YTPHY_PAGE_DATA 0x1F + +#define YTPHY_SYNCE_CFG_REG 0xA012 + +#define YTPHY_DTS_OUTPUT_CLK_DIS 0 +#define YTPHY_DTS_OUTPUT_CLK_25M 25000000 +#define YTPHY_DTS_OUTPUT_CLK_125M 125000000 + +#define YT8531_SCR_SYNCE_ENABLE BIT(6) +/* 1b0 output 25m clock *default* + * 1b1 output 125m clock + */ +#define YT8531_SCR_CLK_FRE_SEL_125M BIT(4) +#define YT8531_SCR_CLK_SRC_MASK GENMASK(3, 1) +#define YT8531_SCR_CLK_SRC_PLL_125M 0 +#define YT8531_SCR_CLK_SRC_UTP_RX 1 +#define YT8531_SCR_CLK_SRC_SDS_RX 2 +#define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 +#define YT8531_SCR_CLK_SRC_REF_25M 4 +#define YT8531_SCR_CLK_SRC_SSC_25M 5 + +/* 1b0 use original tx_clk_rgmii *default* + * 1b1 use inverted tx_clk_rgmii. + */ +#define YT8531_RC1R_TX_CLK_SEL_INVERTED BIT(14) +#define YT8531_RC1R_RX_DELAY_MASK GENMASK(13, 10) +#define YT8531_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) +#define YT8531_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) +#define YT8531_RC1R_RGMII_0_000_NS 0 +#define YT8531_RC1R_RGMII_0_150_NS 1 +#define YT8531_RC1R_RGMII_0_300_NS 2 +#define YT8531_RC1R_RGMII_0_450_NS 3 +#define YT8531_RC1R_RGMII_0_600_NS 4 +#define YT8531_RC1R_RGMII_0_750_NS 5 +#define YT8531_RC1R_RGMII_0_900_NS 6 +#define YT8531_RC1R_RGMII_1_050_NS 7 +#define YT8531_RC1R_RGMII_1_200_NS 8 +#define YT8531_RC1R_RGMII_1_350_NS 9 +#define YT8531_RC1R_RGMII_1_500_NS 10 +#define YT8531_RC1R_RGMII_1_650_NS 11 +#define YT8531_RC1R_RGMII_1_800_NS 12 +#define YT8531_RC1R_RGMII_1_950_NS 13 +#define YT8531_RC1R_RGMII_2_100_NS 14 +#define YT8531_RC1R_RGMII_2_250_NS 15 + +/* Phy gmii clock gating Register */ +#define YT8531_CLOCK_GATING_REG 0xC +#define YT8531_CGR_RX_CLK_EN BIT(12) + +/* Specific Status Register */ +#define YTPHY_SPECIFIC_STATUS_REG 0x11 +#define YTPHY_DUPLEX_MASK BIT(13) +#define YTPHY_DUPLEX_SHIFT 13 +#define YTPHY_SPEED_MODE_MASK GENMASK(15, 14) +#define YTPHY_SPEED_MODE_SHIFT 14 + +#define YT8531_EXTREG_SLEEP_CONTROL1_REG 0x27 +#define YT8531_ESC1R_SLEEP_SW BIT(15) +#define YT8531_ESC1R_PLLON_SLP BIT(14) + +#define YT8531_RGMII_CONFIG1_REG 0xA003 + +#define YT8531_CHIP_CONFIG_REG 0xA001 +#define YT8531_CCR_SW_RST BIT(15) +/* 1b0 disable 1.9ns rxc clock delay *default* + * 1b1 enable 1.9ns rxc clock delay + */ +#define YT8531_CCR_RXC_DLY_EN BIT(8) +#define YT8531_CCR_RXC_DLY_1_900_NS 1900 + +/* bits in struct ytphy_plat_priv->flag */ +#define TX_CLK_ADJ_ENABLED BIT(0) +#define AUTO_SLEEP_DISABLED BIT(1) +#define KEEP_PLL_ENABLED BIT(2) +#define TX_CLK_10_INVERTED BIT(3) +#define TX_CLK_100_INVERTED BIT(4) +#define TX_CLK_1000_INVERTED BIT(5) + +struct ytphy_plat_priv { + u32 rx_delay_ps; + u32 tx_delay_ps; + u32 clk_out_frequency; + u32 flag; +}; + +/** + * struct ytphy_cfg_reg_map - map a config value to a register value + * @cfg: value in device configuration + * @reg: value in the register + */ +struct ytphy_cfg_reg_map { + u32 cfg; + u32 reg; +}; + +static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { + /* for tx delay / rx delay with YT8531_CCR_RXC_DLY_EN is not set. */ + { 0, YT8531_RC1R_RGMII_0_000_NS }, + { 150, YT8531_RC1R_RGMII_0_150_NS }, + { 300, YT8531_RC1R_RGMII_0_300_NS }, + { 450, YT8531_RC1R_RGMII_0_450_NS }, + { 600, YT8531_RC1R_RGMII_0_600_NS }, + { 750, YT8531_RC1R_RGMII_0_750_NS }, + { 900, YT8531_RC1R_RGMII_0_900_NS }, + { 1050, YT8531_RC1R_RGMII_1_050_NS }, + { 1200, YT8531_RC1R_RGMII_1_200_NS }, + { 1350, YT8531_RC1R_RGMII_1_350_NS }, + { 1500, YT8531_RC1R_RGMII_1_500_NS }, + { 1650, YT8531_RC1R_RGMII_1_650_NS }, + { 1800, YT8531_RC1R_RGMII_1_800_NS }, + { 1950, YT8531_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */ + { 2100, YT8531_RC1R_RGMII_2_100_NS }, + { 2250, YT8531_RC1R_RGMII_2_250_NS }, + + /* only for rx delay with YT8531_CCR_RXC_DLY_EN is set. */ + { 0 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_000_NS }, + { 150 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_150_NS }, + { 300 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_300_NS }, + { 450 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_450_NS }, + { 600 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_600_NS }, + { 750 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_750_NS }, + { 900 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_900_NS }, + { 1050 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_050_NS }, + { 1200 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_200_NS }, + { 1350 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_350_NS }, + { 1500 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_500_NS }, + { 1650 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_650_NS }, + { 1800 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_800_NS }, + { 1950 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_950_NS }, + { 2100 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_2_100_NS }, + { 2250 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_2_250_NS } +}; + +static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, + u32 val, + u16 *rxc_dly_en) +{ + int tb_size = ARRAY_SIZE(ytphy_rgmii_delays); + int tb_size_half = tb_size / 2; + int i; + + /* when rxc_dly_en is NULL, it is get the delay for tx, only half of + * tb_size is valid. + */ + if (!rxc_dly_en) + tb_size = tb_size_half; + + for (i = 0; i < tb_size; i++) { + if (ytphy_rgmii_delays[i].cfg == val) { + if (rxc_dly_en && i < tb_size_half) + *rxc_dly_en = 0; + return ytphy_rgmii_delays[i].reg; + } + } + + pr_warn("Unsupported value %d, using default (%u)\n", + val, YT8531_RC1R_RGMII_1_950_NS); + + /* when rxc_dly_en is not NULL, it is get the delay for rx. + * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps, + * so YT8531_CCR_RXC_DLY_EN should not be set. + */ + if (rxc_dly_en) + *rxc_dly_en = 0; + + return YT8531_RC1R_RGMII_1_950_NS; +} + +static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, + u16 set) +{ + int ret; + + ret = phy_write(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_SELECT, regnum); + if (ret < 0) + return ret; + + return phy_modify(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA, mask, set); +} + +static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv = phydev->priv; + u16 rxc_dly_en = YT8531_CCR_RXC_DLY_EN; + u32 rx_reg, tx_reg; + u16 mask, val = 0; + int ret; + + rx_reg = ytphy_get_delay_reg_value(phydev, priv->rx_delay_ps, + &rxc_dly_en); + tx_reg = ytphy_get_delay_reg_value(phydev, priv->tx_delay_ps, + NULL); + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + rxc_dly_en = 0; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val |= FIELD_PREP(YT8531_RC1R_RX_DELAY_MASK, rx_reg); + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + rxc_dly_en = 0; + val |= FIELD_PREP(YT8531_RC1R_GE_TX_DELAY_MASK, tx_reg); + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val |= FIELD_PREP(YT8531_RC1R_RX_DELAY_MASK, rx_reg) | + FIELD_PREP(YT8531_RC1R_GE_TX_DELAY_MASK, tx_reg); + break; + default: /* do not support other modes */ + return -EOPNOTSUPP; + } + + ret = ytphy_modify_ext(phydev, YT8531_CHIP_CONFIG_REG, + YT8531_CCR_RXC_DLY_EN, rxc_dly_en); + if (ret < 0) + return ret; + + /* Generally, it is not necessary to adjust YT8531_RC1R_FE_TX_DELAY */ + mask = YT8531_RC1R_RX_DELAY_MASK | YT8531_RC1R_GE_TX_DELAY_MASK; + return ytphy_modify_ext(phydev, YT8531_RGMII_CONFIG1_REG, mask, val); +} + +static int yt8531_parse_status(struct phy_device *phydev) +{ + int val; + int speed, speed_mode; + + val = phy_read(phydev, MDIO_DEVAD_NONE, YTPHY_SPECIFIC_STATUS_REG); + if (val < 0) + return val; + + speed_mode = (val & YTPHY_SPEED_MODE_MASK) >> YTPHY_SPEED_MODE_SHIFT; + switch (speed_mode) { + case 2: + speed = SPEED_1000; + break; + case 1: + speed = SPEED_100; + break; + default: + speed = SPEED_10; + break; + } + + phydev->speed = speed; + phydev->duplex = (val & YTPHY_DUPLEX_MASK) >> YTPHY_DUPLEX_SHIFT; + + return 0; +} + +static int yt8531_startup(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv = phydev->priv; + u16 val = 0; + int ret; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + ret = yt8531_parse_status(phydev); + if (ret) + return ret; + + if (phydev->speed < 0) + return -EINVAL; + + if (!(priv->flag & TX_CLK_ADJ_ENABLED)) + return 0; + + switch (phydev->speed) { + case SPEED_1000: + if (priv->flag & TX_CLK_1000_INVERTED) + val = YT8531_RC1R_TX_CLK_SEL_INVERTED; + break; + case SPEED_100: + if (priv->flag & TX_CLK_100_INVERTED) + val = YT8531_RC1R_TX_CLK_SEL_INVERTED; + break; + case SPEED_10: + if (priv->flag & TX_CLK_10_INVERTED) + val = YT8531_RC1R_TX_CLK_SEL_INVERTED; + break; + default: + printf("UNKNOWN SPEED\n"); + return -EINVAL; + } + + ret = ytphy_modify_ext(phydev, YT8531_RGMII_CONFIG1_REG, + YT8531_RC1R_TX_CLK_SEL_INVERTED, val); + if (ret < 0) + pr_warn("Modify TX_CLK_SEL err:%d\n", ret); + + return 0; +} + +static void ytphy_dt_parse(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv = phydev->priv; + + priv->clk_out_frequency = ofnode_read_u32_default(phydev->node, + "motorcomm,clk-out-frequency-hz", + YTPHY_DTS_OUTPUT_CLK_DIS); + priv->rx_delay_ps = ofnode_read_u32_default(phydev->node, + "rx-internal-delay-ps", + YT8531_RC1R_RGMII_1_950_NS); + priv->tx_delay_ps = ofnode_read_u32_default(phydev->node, + "tx-internal-delay-ps", + YT8531_RC1R_RGMII_1_950_NS); + + if (ofnode_read_bool(phydev->node, "motorcomm,auto-sleep-disabled")) + priv->flag |= AUTO_SLEEP_DISABLED; + + if (ofnode_read_bool(phydev->node, "motorcomm,keep-pll-enabled")) + priv->flag |= KEEP_PLL_ENABLED; + + if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-adj-enabled")) + priv->flag |= TX_CLK_ADJ_ENABLED; + + if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-10-inverted")) + priv->flag |= TX_CLK_10_INVERTED; + + if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-100-inverted")) + priv->flag |= TX_CLK_100_INVERTED; + + if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-1000-inverted")) + priv->flag |= TX_CLK_1000_INVERTED; +} + +static int yt8531_config(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv = phydev->priv; + u16 mask, val; + int ret; + + ret = genphy_config_aneg(phydev); + if (ret < 0) + return ret; + + ytphy_dt_parse(phydev); + switch (priv->clk_out_frequency) { + case YTPHY_DTS_OUTPUT_CLK_DIS: + mask = YT8531_SCR_SYNCE_ENABLE; + val = 0; + break; + case YTPHY_DTS_OUTPUT_CLK_25M: + mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | + YT8531_SCR_CLK_FRE_SEL_125M; + val = YT8531_SCR_SYNCE_ENABLE | + FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, + YT8531_SCR_CLK_SRC_REF_25M); + break; + case YTPHY_DTS_OUTPUT_CLK_125M: + mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | + YT8531_SCR_CLK_FRE_SEL_125M; + val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | + FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, + YT8531_SCR_CLK_SRC_PLL_125M); + break; + default: + pr_warn("Freq err:%u\n", priv->clk_out_frequency); + return -EINVAL; + } + + ret = ytphy_modify_ext(phydev, YTPHY_SYNCE_CFG_REG, mask, + val); + if (ret < 0) + return ret; + + ret = ytphy_rgmii_clk_delay_config(phydev); + if (ret < 0) + return ret; + + if (priv->flag & AUTO_SLEEP_DISABLED) { + /* disable auto sleep */ + ret = ytphy_modify_ext(phydev, + YT8531_EXTREG_SLEEP_CONTROL1_REG, + YT8531_ESC1R_SLEEP_SW, 0); + if (ret < 0) + return ret; + } + + if (priv->flag & KEEP_PLL_ENABLED) { + /* enable RXC clock when no wire plug */ + ret = ytphy_modify_ext(phydev, + YT8531_CLOCK_GATING_REG, + YT8531_CGR_RX_CLK_EN, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +static int yt8531_probe(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv; + + priv = calloc(1, sizeof(struct ytphy_plat_priv)); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +U_BOOT_PHY_DRIVER(motorcomm8531) = { + .name = "YT8531 Gigabit Ethernet", + .uid = PHY_ID_YT8531, + .mask = PHY_ID_MASK, + .features = PHY_GBIT_FEATURES, + .probe = &yt8531_probe, + .config = &yt8531_config, + .startup = &yt8531_startup, + .shutdown = &genphy_shutdown, +}; |