diff options
author | Patrice Chotard <patrice.chotard@foss.st.com> | 2022-03-30 09:33:14 +0200 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2022-05-23 09:33:10 -0400 |
commit | 3feea0ba196ac686090acc48c77cf02b996a8589 (patch) | |
tree | 085e8c826b977b1699986e6800a0ebf8b2d230e3 /drivers/net/pfe_eth/pfe_firmware.c | |
parent | 61708bb0a24caad99b0e79de52077dafb59688d6 (diff) | |
download | u-boot-3feea0ba196ac686090acc48c77cf02b996a8589.zip u-boot-3feea0ba196ac686090acc48c77cf02b996a8589.tar.gz u-boot-3feea0ba196ac686090acc48c77cf02b996a8589.tar.bz2 |
spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.
To sum-up:
- Previous call tree was:
spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()
- Current call tree is:
spi_flash_probe() -> _spi_get_bus_and_cs()
spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()
This patch impacts the following :
- cmd/sf.c: if spi mode and/or speed is passed in argument of
do_spi_flash_probe(), call spi_flash_probe() otherwise call
spi_flash_probe_bus_cs().
- drivers/net/fm/fm.c: as by default spi speed and mode was set to
0 and a comment indicates that speed and mode are read from DT,
use spi_flash_probe_bus_cs().
- drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
from DT by all platforms using this driver, so keep legacy and replace
spi_flash_probe_bus_cs() by spi_flash_probe();
- drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
so replace spi_flash_probe_bus_cs() by spi_flash_probe().
- drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
usage of this driver, nevertheless, keep legacy and replace
spi_get_bus_and_cs() by _spi_get_bus_and_cs().
- env/sf.c: a comment indicates that speed and mode are read
from DT. So use spi_flash_probe_bus_cs().
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Diffstat (limited to 'drivers/net/pfe_eth/pfe_firmware.c')
-rw-r--r-- | drivers/net/pfe_eth/pfe_firmware.c | 19 |
1 files changed, 4 insertions, 15 deletions
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c index 6669048..82a4aa8 100644 --- a/drivers/net/pfe_eth/pfe_firmware.c +++ b/drivers/net/pfe_eth/pfe_firmware.c @@ -172,31 +172,20 @@ static int pfe_fit_check(void) int pfe_spi_flash_init(void) { struct spi_flash *pfe_flash; - struct udevice *new; int ret = 0; void *addr = malloc(CONFIG_SYS_LS_PFE_FW_LENGTH); if (!addr) return -ENOMEM; - ret = spi_flash_probe_bus_cs(CONFIG_SYS_FSL_PFE_SPI_BUS, - CONFIG_SYS_FSL_PFE_SPI_CS, - CONFIG_SYS_FSL_PFE_SPI_MAX_HZ, - CONFIG_SYS_FSL_PFE_SPI_MODE, - &new); - if (ret) { - printf("SF: failed to probe spi\n"); - free(addr); - device_remove(new, DM_REMOVE_NORMAL); - return ret; - } - + pfe_flash = spi_flash_probe(CONFIG_SYS_FSL_PFE_SPI_BUS, + CONFIG_SYS_FSL_PFE_SPI_CS, + CONFIG_SYS_FSL_PFE_SPI_MAX_HZ, + CONFIG_SYS_FSL_PFE_SPI_MODE); - pfe_flash = dev_get_uclass_priv(new); if (!pfe_flash) { printf("SF: probe for pfe failed\n"); free(addr); - device_remove(new, DM_REMOVE_NORMAL); return -ENODEV; } |