diff options
author | Takahiro Kuwano <Takahiro.Kuwano@infineon.com> | 2023-12-22 14:46:03 +0900 |
---|---|---|
committer | Jagan Teki <jagan@edgeble.ai> | 2024-01-29 19:34:17 +0530 |
commit | 33934e11d4de5296bffe7e2ae10b287af43400da (patch) | |
tree | e9dfba6df2ff8c2fcae2dc2a5141c4aa9e78b733 /drivers/mtd | |
parent | c4de92d949b62440706c9f9e7f33076907a5a946 (diff) | |
download | u-boot-33934e11d4de5296bffe7e2ae10b287af43400da.zip u-boot-33934e11d4de5296bffe7e2ae10b287af43400da.tar.gz u-boot-33934e11d4de5296bffe7e2ae10b287af43400da.tar.bz2 |
mtd: spi-nor-core: Consolidate setup() hook for Infineon(Cypress) S25 and S28
s28hx_t_setup() only checks sector layout setting. To support multi-die
package parts like S28HS02GT, it needs to check device size and assign
ready() hook for multi-die package parts. These are covered in s25_setup()
so we can consolidate s28hx_t_setup() and s25_setup() into one named
s25_s28_setup().
spi_nor_wait_till_ready() at the beginning of s28hx_t_setup() can be
removed since there is no op that makes device busy state before setup.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/spi/spi-nor-core.c | 41 |
1 files changed, 4 insertions, 37 deletions
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 32cdb9d..61b8b43 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -3405,8 +3405,8 @@ static int s25_s28_erase_non_uniform(struct spi_nor *nor, loff_t addr) SZ_128K); } -static int s25_setup(struct spi_nor *nor, const struct flash_info *info, - const struct spi_nor_flash_parameter *params) +static int s25_s28_setup(struct spi_nor *nor, const struct flash_info *info, + const struct spi_nor_flash_parameter *params) { int ret; u8 cr; @@ -3453,7 +3453,7 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info, static void s25_default_init(struct spi_nor *nor) { - nor->setup = s25_setup; + nor->setup = s25_s28_setup; } static int s25_post_bfpt_fixup(struct spi_nor *nor, @@ -3612,43 +3612,10 @@ static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor) return 0; } -static int s28hx_t_setup(struct spi_nor *nor, const struct flash_info *info, - const struct spi_nor_flash_parameter *params) -{ - struct spi_mem_op op; - u8 buf; - u8 addr_width = 3; - int ret; - - ret = spi_nor_wait_till_ready(nor); - if (ret) - return ret; - - /* - * Check CFR3V to check if non-uniform sector mode is selected. If it - * is, set the erase hook to the non-uniform erase procedure. - */ - op = (struct spi_mem_op) - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), - SPI_MEM_OP_ADDR(addr_width, - SPINOR_REG_CYPRESS_CFR3V, 1), - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(1, &buf, 1)); - - ret = spi_mem_exec_op(nor->spi, &op); - if (ret) - return ret; - - if (!(buf & SPINOR_REG_CYPRESS_CFR3_UNISECT)) - nor->erase = s25_s28_erase_non_uniform; - - return spi_nor_default_setup(nor, info, params); -} - static void s28hx_t_default_init(struct spi_nor *nor) { nor->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable; - nor->setup = s28hx_t_setup; + nor->setup = s25_s28_setup; } static void s28hx_t_post_sfdp_fixup(struct spi_nor *nor, |