input: Drop PS/2 keyboard support

This is not used by any current board and has not been converted to driver
model. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 950 deletions

diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 9109ac6..ee7bfc4 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -12,9 +12,5 @@ obj-$(CONFIG_TEGRA_KEYBOARD) += tegra-kbc.o
 obj-$(CONFIG_TWL4030_INPUT) += twl4030.o
 obj-$(CONFIG_TWL6030_INPUT) += twl6030.o
 obj-$(CONFIG_CROS_EC_KEYB) += cros_ec_keyb.o
-ifdef CONFIG_PS2KBD
-obj-y += keyboard.o pc_keyb.o
-obj-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o
-endif
 obj-y += input.o
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += key_matrix.o
diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
deleted file mode 100644
index 84ee015..0000000
--- a/drivers/input/keyboard.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/***********************************************************************
- *
- * (C) Copyright 2004
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * Keyboard driver
- *
- ***********************************************************************/
-
-#include <common.h>
-#include <console.h>
-#include <input.h>
-
-#include <stdio_dev.h>
-#include <keyboard.h>
-#include <stdio_dev.h>
-
-static struct input_config config;
-
-static int kbd_read_keys(struct input_config *config)
-{
-#if defined(CONFIG_ARCH_MPC8540) || \
-		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
-	/* no ISR is used, so received chars must be polled */
-	ps2ser_check();
-#endif
-
-	return 1;
-}
-
-static int check_leds(int ret)
-{
-	int leds;
-
-	leds = input_leds_changed(&config);
-	if (leds >= 0)
-		pckbd_leds(leds);
-
-	return ret;
-}
-
-/* test if a character is in the queue */
-static int kbd_testc(struct stdio_dev *dev)
-{
-	return check_leds(input_tstc(&config));
-}
-
-/* gets the character from the queue */
-static int kbd_getc(struct stdio_dev *dev)
-{
-	return check_leds(input_getc(&config));
-}
-
-void handle_scancode(unsigned char scan_code)
-{
-	bool release = false;
-
-	/* Compare with i8042_kbd_check() in i8042.c if some logic is missing */
-	if (scan_code & 0x80) {
-		scan_code &= 0x7f;
-		release = true;
-	}
-
-	input_add_keycode(&config, scan_code, release);
-}
-
-/* TODO: convert to driver model */
-int kbd_init (void)
-{
-	struct stdio_dev kbddev;
-	struct input_config *input = &config;
-
-	if(kbd_init_hw()==-1)
-		return -1;
-	memset (&kbddev, 0, sizeof(kbddev));
-	strcpy(kbddev.name, "kbd");
-	kbddev.flags =  DEV_FLAGS_INPUT;
-	kbddev.getc = kbd_getc;
-	kbddev.tstc = kbd_testc;
-
-	input_init(input, 0);
-	input->read_keys = kbd_read_keys;
-	input_add_tables(input, true);
-
-	return input_stdio_register(&kbddev);
-}
diff --git a/drivers/input/pc_keyb.c b/drivers/input/pc_keyb.c
deleted file mode 100644
index 1606ab3..0000000
--- a/drivers/input/pc_keyb.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/***********************************************************************
- *
- * (C) Copyright 2004
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * PS/2 keyboard driver
- *
- * Originally from linux source (drivers/char/pc_keyb.c)
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include <keyboard.h>
-#include <pc_keyb.h>
-
-#undef KBG_DEBUG
-
-#ifdef KBG_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-
-/*
- * This reads the keyboard status port, and does the
- * appropriate action.
- *
- */
-static unsigned char handle_kbd_event(void)
-{
-	unsigned char status = kbd_read_status();
-	unsigned int work = 10000;
-
-	while ((--work > 0) && (status & KBD_STAT_OBF)) {
-		unsigned char scancode;
-
-		scancode = kbd_read_input();
-
-		/* Error bytes must be ignored to make the
-		   Synaptics touchpads compaq use work */
-		/* Ignore error bytes */
-		if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
-			if (status & KBD_STAT_MOUSE_OBF)
-				; /* not supported: handle_mouse_event(scancode); */
-			else
-				handle_scancode(scancode);
-		}
-		status = kbd_read_status();
-	}
-	if (!work)
-		PRINTF("pc_keyb: controller jammed (0x%02X).\n", status);
-	return status;
-}
-
-
-static int kbd_read_data(void)
-{
-	int val;
-	unsigned char status;
-
-	val = -1;
-	status = kbd_read_status();
-	if (status & KBD_STAT_OBF) {
-		val = kbd_read_input();
-		if (status & (KBD_STAT_GTO | KBD_STAT_PERR))
-			val = -2;
-	}
-	return val;
-}
-
-static int kbd_wait_for_input(void)
-{
-	unsigned long timeout;
-	int val;
-
-	timeout = KBD_TIMEOUT;
-	val=kbd_read_data();
-	while(val < 0) {
-		if(timeout--==0)
-			return -1;
-		udelay(1000);
-		val=kbd_read_data();
-	}
-	return val;
-}
-
-
-static int kb_wait(void)
-{
-	unsigned long timeout = KBC_TIMEOUT * 10;
-
-	do {
-		unsigned char status = handle_kbd_event();
-		if (!(status & KBD_STAT_IBF))
-			return 0; /* ok */
-		udelay(1000);
-		timeout--;
-	} while (timeout);
-	return 1;
-}
-
-static void kbd_write_command_w(int data)
-{
-	if(kb_wait())
-		PRINTF("timeout in kbd_write_command_w\n");
-	kbd_write_command(data);
-}
-
-static void kbd_write_output_w(int data)
-{
-	if(kb_wait())
-		PRINTF("timeout in kbd_write_output_w\n");
-	kbd_write_output(data);
-}
-
-static void kbd_send_data(unsigned char data)
-{
-	kbd_write_output_w(data);
-	kbd_wait_for_input();
-}
-
-
-static char * kbd_initialize(void)
-{
-	int status;
-
-	/*
-	 * Test the keyboard interface.
-	 * This seems to be the only way to get it going.
-	 * If the test is successful a x55 is placed in the input buffer.
-	 */
-	kbd_write_command_w(KBD_CCMD_SELF_TEST);
-	if (kbd_wait_for_input() != 0x55)
-		return "Kbd:   failed self test";
-	/*
-	 * Perform a keyboard interface test.  This causes the controller
-	 * to test the keyboard clock and data lines.  The results of the
-	 * test are placed in the input buffer.
-	 */
-	kbd_write_command_w(KBD_CCMD_KBD_TEST);
-	if (kbd_wait_for_input() != 0x00)
-		return "Kbd:   interface failed self test";
-	/*
-	 * Enable the keyboard by allowing the keyboard clock to run.
-	 */
-	kbd_write_command_w(KBD_CCMD_KBD_ENABLE);
-
-	/*
-	 * Reset keyboard. If the read times out
-	 * then the assumption is that no keyboard is
-	 * plugged into the machine.
-	 * This defaults the keyboard to scan-code set 2.
-	 *
-	 * Set up to try again if the keyboard asks for RESEND.
-	 */
-	do {
-		kbd_write_output_w(KBD_CMD_RESET);
-		status = kbd_wait_for_input();
-		if (status == KBD_REPLY_ACK)
-			break;
-		if (status != KBD_REPLY_RESEND) {
-			PRINTF("status: %X\n",status);
-			return "Kbd:   reset failed, no ACK";
-		}
-	} while (1);
-	if (kbd_wait_for_input() != KBD_REPLY_POR)
-		return "Kbd:   reset failed, no POR";
-
-	/*
-	 * Set keyboard controller mode. During this, the keyboard should be
-	 * in the disabled state.
-	 *
-	 * Set up to try again if the keyboard asks for RESEND.
-	 */
-	do {
-		kbd_write_output_w(KBD_CMD_DISABLE);
-		status = kbd_wait_for_input();
-		if (status == KBD_REPLY_ACK)
-			break;
-		if (status != KBD_REPLY_RESEND)
-			return "Kbd:   disable keyboard: no ACK";
-	} while (1);
-
-	kbd_write_command_w(KBD_CCMD_WRITE_MODE);
-	kbd_write_output_w(KBD_MODE_KBD_INT
-			      | KBD_MODE_SYS
-			      | KBD_MODE_DISABLE_MOUSE
-			      | KBD_MODE_KCC);
-
-	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
-	kbd_write_command_w(KBD_CCMD_READ_MODE);
-	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
-		/*
-		 * If the controller does not support conversion,
-		 * Set the keyboard to scan-code set 1.
-		 */
-		kbd_write_output_w(0xF0);
-		kbd_wait_for_input();
-		kbd_write_output_w(0x01);
-		kbd_wait_for_input();
-	}
-	kbd_write_output_w(KBD_CMD_ENABLE);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   enable keyboard: no ACK";
-
-	/*
-	 * Finally, set the typematic rate to maximum.
-	 */
-	kbd_write_output_w(KBD_CMD_SET_RATE);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   Set rate: no ACK";
-	kbd_write_output_w(0x00);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   Set rate: no ACK";
-	return NULL;
-}
-
-static void kbd_interrupt(void *dev_id)
-{
-	handle_kbd_event();
-}
-
-/******************************************************************
- * Init
- ******************************************************************/
-
-int kbd_init_hw(void)
-{
-	char* result;
-
-	kbd_request_region();
-
-	result=kbd_initialize();
-	if (result==NULL) {
-		PRINTF("AT Keyboard initialized\n");
-		kbd_request_irq(kbd_interrupt);
-		return (1);
-	} else {
-		printf("%s\n",result);
-		return (-1);
-	}
-}
-
-void pckbd_leds(unsigned char leds)
-{
-	kbd_send_data(KBD_CMD_SET_LEDS);
-	kbd_send_data(leds);
-}
diff --git a/drivers/input/ps2mult.c b/drivers/input/ps2mult.c
deleted file mode 100644
index ab74933..0000000
--- a/drivers/input/ps2mult.c
+++ /dev/null
@@ -1,461 +0,0 @@
-/***********************************************************************
- *
- * (C) Copyright 2004
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * PS/2 multiplexer driver
- *
- * Originally from linux source (drivers/char/ps2mult.c)
- *
- * Uses simple serial driver (ps2ser.c) to access the multiplexer
- * Used by PS/2 keyboard driver (pc_keyb.c)
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include <pc_keyb.h>
-#include <asm/atomic.h>
-#include <ps2mult.h>
-
-/* #define DEBUG_MULT */
-/* #define DEBUG_KEYB */
-
-#define KBD_STAT_DEFAULT		(KBD_STAT_SELFTEST | KBD_STAT_UNLOCKED)
-
-#define PRINTF(format, args...)		printf("ps2mult.c: " format, ## args)
-
-#ifdef DEBUG_MULT
-#define PRINTF_MULT(format, args...)	printf("PS2MULT: " format, ## args)
-#else
-#define PRINTF_MULT(format, args...)
-#endif
-
-#ifdef DEBUG_KEYB
-#define PRINTF_KEYB(format, args...)	printf("KEYB: " format, ## args)
-#else
-#define PRINTF_KEYB(format, args...)
-#endif
-
-
-static ulong start_time;
-static int init_done = 0;
-
-static int received_escape = 0;
-static int received_bsync = 0;
-static int received_selector = 0;
-
-static int kbd_command_active = 0;
-static int mouse_command_active = 0;
-static int ctl_command_active = 0;
-
-static u_char command_byte = 0;
-
-static void (*keyb_handler)(void *dev_id);
-
-static u_char ps2mult_buf [PS2BUF_SIZE];
-static atomic_t ps2mult_buf_cnt;
-static int ps2mult_buf_in_idx;
-static int ps2mult_buf_out_idx;
-
-static u_char ps2mult_buf_status [PS2BUF_SIZE];
-
-#ifndef CONFIG_BOARD_EARLY_INIT_R
-#error #define CONFIG_BOARD_EARLY_INIT_R and call ps2mult_early_init() in board_early_init_r()
-#endif
-void ps2mult_early_init (void)
-{
-	start_time = get_timer(0);
-}
-
-static void ps2mult_send_byte(u_char byte, u_char sel)
-{
-	ps2ser_putc(sel);
-
-	if (sel == PS2MULT_KB_SELECTOR) {
-		PRINTF_MULT("0x%02x send KEYBOARD\n", byte);
-		kbd_command_active = 1;
-	} else {
-		PRINTF_MULT("0x%02x send MOUSE\n", byte);
-		mouse_command_active = 1;
-	}
-
-	switch (byte) {
-	case PS2MULT_ESCAPE:
-	case PS2MULT_BSYNC:
-	case PS2MULT_KB_SELECTOR:
-	case PS2MULT_MS_SELECTOR:
-	case PS2MULT_SESSION_START:
-	case PS2MULT_SESSION_END:
-		ps2ser_putc(PS2MULT_ESCAPE);
-		break;
-	default:
-		break;
-	}
-
-	ps2ser_putc(byte);
-}
-
-static void ps2mult_receive_byte(u_char byte, u_char sel)
-{
-	u_char status = KBD_STAT_DEFAULT;
-
-#if 1 /* Ignore mouse in U-Boot */
-	if (sel == PS2MULT_MS_SELECTOR) return;
-#endif
-
-	if (sel == PS2MULT_KB_SELECTOR) {
-		if (kbd_command_active) {
-			if (!received_bsync) {
-				PRINTF_MULT("0x%02x lost KEYBOARD !!!\n", byte);
-				return;
-			} else {
-				kbd_command_active = 0;
-				received_bsync = 0;
-			}
-		}
-		PRINTF_MULT("0x%02x receive KEYBOARD\n", byte);
-		status |= KBD_STAT_IBF | KBD_STAT_OBF;
-	} else {
-		if (mouse_command_active) {
-			if (!received_bsync) {
-				PRINTF_MULT("0x%02x lost MOUSE !!!\n", byte);
-				return;
-			} else {
-				mouse_command_active = 0;
-				received_bsync = 0;
-			}
-		}
-		PRINTF_MULT("0x%02x receive MOUSE\n", byte);
-		status |= KBD_STAT_IBF | KBD_STAT_OBF | KBD_STAT_MOUSE_OBF;
-	}
-
-	if (atomic_read(&ps2mult_buf_cnt) < PS2BUF_SIZE) {
-		ps2mult_buf_status[ps2mult_buf_in_idx] = status;
-		ps2mult_buf[ps2mult_buf_in_idx++] = byte;
-		ps2mult_buf_in_idx &= (PS2BUF_SIZE - 1);
-		atomic_inc(&ps2mult_buf_cnt);
-	} else {
-		PRINTF("buffer overflow\n");
-	}
-
-	if (received_bsync) {
-		PRINTF("unexpected BSYNC\n");
-		received_bsync = 0;
-	}
-}
-
-void ps2mult_callback (int in_cnt)
-{
-	int i;
-	u_char byte;
-	static int keyb_handler_active = 0;
-
-	if (!init_done) {
-		return;
-	}
-
-	for (i = 0; i < in_cnt; i ++) {
-		byte = ps2ser_getc();
-
-		if (received_escape) {
-			ps2mult_receive_byte(byte, received_selector);
-			received_escape = 0;
-		} else switch (byte) {
-		case PS2MULT_ESCAPE:
-			PRINTF_MULT("ESCAPE receive\n");
-			received_escape = 1;
-			break;
-
-		case PS2MULT_BSYNC:
-			PRINTF_MULT("BSYNC receive\n");
-			received_bsync = 1;
-			break;
-
-		case PS2MULT_KB_SELECTOR:
-		case PS2MULT_MS_SELECTOR:
-			PRINTF_MULT("%s receive\n",
-			    byte == PS2MULT_KB_SELECTOR ? "KB_SEL" : "MS_SEL");
-			received_selector = byte;
-			break;
-
-		case PS2MULT_SESSION_START:
-		case PS2MULT_SESSION_END:
-			PRINTF_MULT("%s receive\n",
-			    byte == PS2MULT_SESSION_START ?
-			    "SESSION_START" : "SESSION_END");
-			break;
-
-		default:
-			ps2mult_receive_byte(byte, received_selector);
-		}
-	}
-
-	if (keyb_handler && !keyb_handler_active &&
-	    atomic_read(&ps2mult_buf_cnt)) {
-		keyb_handler_active = 1;
-		keyb_handler(NULL);
-		keyb_handler_active = 0;
-	}
-}
-
-u_char ps2mult_read_status(void)
-{
-	u_char byte;
-
-	if (atomic_read(&ps2mult_buf_cnt) == 0) {
-		ps2ser_check();
-	}
-
-	if (atomic_read(&ps2mult_buf_cnt)) {
-		byte = ps2mult_buf_status[ps2mult_buf_out_idx];
-	} else {
-		byte = KBD_STAT_DEFAULT;
-	}
-	PRINTF_KEYB("read_status()=0x%02x\n", byte);
-	return byte;
-}
-
-u_char ps2mult_read_input(void)
-{
-	u_char byte = 0;
-
-	if (atomic_read(&ps2mult_buf_cnt) == 0) {
-		ps2ser_check();
-	}
-
-	if (atomic_read(&ps2mult_buf_cnt)) {
-		byte = ps2mult_buf[ps2mult_buf_out_idx++];
-		ps2mult_buf_out_idx &= (PS2BUF_SIZE - 1);
-		atomic_dec(&ps2mult_buf_cnt);
-	}
-	PRINTF_KEYB("read_input()=0x%02x\n", byte);
-	return byte;
-}
-
-void ps2mult_write_output(u_char val)
-{
-	int i;
-
-	PRINTF_KEYB("write_output(0x%02x)\n", val);
-
-	for (i = 0; i < KBD_TIMEOUT; i++) {
-		if (!kbd_command_active && !mouse_command_active) {
-			break;
-		}
-		udelay(1000);
-		ps2ser_check();
-	}
-
-	if (kbd_command_active) {
-		PRINTF("keyboard command not acknoledged\n");
-		kbd_command_active = 0;
-	}
-
-	if (mouse_command_active) {
-		PRINTF("mouse command not acknoledged\n");
-		mouse_command_active = 0;
-	}
-
-	if (ctl_command_active) {
-		switch (ctl_command_active) {
-		case KBD_CCMD_WRITE_MODE:
-			  /* Scan code conversion not supported */
-			command_byte = val & ~KBD_MODE_KCC;
-			break;
-
-		case KBD_CCMD_WRITE_AUX_OBUF:
-			ps2mult_receive_byte(val, PS2MULT_MS_SELECTOR);
-			break;
-
-		case KBD_CCMD_WRITE_MOUSE:
-			ps2mult_send_byte(val, PS2MULT_MS_SELECTOR);
-			break;
-
-		default:
-			PRINTF("invalid controller command\n");
-			break;
-		}
-
-		ctl_command_active = 0;
-		return;
-	}
-
-	ps2mult_send_byte(val, PS2MULT_KB_SELECTOR);
-}
-
-void ps2mult_write_command(u_char val)
-{
-	ctl_command_active = 0;
-
-	PRINTF_KEYB("write_command(0x%02x)\n", val);
-
-	switch (val) {
-	case KBD_CCMD_READ_MODE:
-		ps2mult_receive_byte(command_byte, PS2MULT_KB_SELECTOR);
-		break;
-
-	case KBD_CCMD_WRITE_MODE:
-		ctl_command_active = val;
-		break;
-
-	case KBD_CCMD_MOUSE_DISABLE:
-		break;
-
-	case KBD_CCMD_MOUSE_ENABLE:
-		break;
-
-	case KBD_CCMD_SELF_TEST:
-		ps2mult_receive_byte(0x55, PS2MULT_KB_SELECTOR);
-		break;
-
-	case KBD_CCMD_KBD_TEST:
-		ps2mult_receive_byte(0x00, PS2MULT_KB_SELECTOR);
-		break;
-
-	case KBD_CCMD_KBD_DISABLE:
-		break;
-
-	case KBD_CCMD_KBD_ENABLE:
-		break;
-
-	case KBD_CCMD_WRITE_AUX_OBUF:
-		ctl_command_active = val;
-		break;
-
-	case KBD_CCMD_WRITE_MOUSE:
-		ctl_command_active = val;
-		break;
-
-	default:
-		PRINTF("invalid controller command\n");
-		break;
-	}
-}
-
-static int ps2mult_getc_w (void)
-{
-	int res = -1;
-	int i;
-
-	for (i = 0; i < KBD_TIMEOUT; i++) {
-		if (ps2ser_check()) {
-			res = ps2ser_getc();
-			break;
-		}
-		udelay(1000);
-	}
-
-	switch (res) {
-	case PS2MULT_KB_SELECTOR:
-	case PS2MULT_MS_SELECTOR:
-		received_selector = res;
-		break;
-	default:
-		break;
-	}
-
-	return res;
-}
-
-int ps2mult_init (void)
-{
-	int byte;
-	int kbd_found = 0;
-	int mouse_found = 0;
-
-	while (get_timer(start_time) < CONFIG_PS2MULT_DELAY);
-
-	ps2ser_init();
-
-	ps2ser_putc(PS2MULT_SESSION_START);
-
-	ps2ser_putc(PS2MULT_KB_SELECTOR);
-	ps2ser_putc(KBD_CMD_RESET);
-
-	do {
-		byte = ps2mult_getc_w();
-	} while (byte >= 0 && byte != KBD_REPLY_ACK);
-
-	if (byte == KBD_REPLY_ACK) {
-		byte = ps2mult_getc_w();
-		if (byte == 0xaa) {
-			kbd_found = 1;
-			puts("keyboard");
-		}
-	}
-
-	if (!kbd_found) {
-		while (byte >= 0) {
-			byte = ps2mult_getc_w();
-		}
-	}
-
-#if 1 /* detect mouse */
-	ps2ser_putc(PS2MULT_MS_SELECTOR);
-	ps2ser_putc(AUX_RESET);
-
-	do {
-		byte = ps2mult_getc_w();
-	} while (byte >= 0 && byte != AUX_ACK);
-
-	if (byte == AUX_ACK) {
-		byte = ps2mult_getc_w();
-		if (byte == 0xaa) {
-			byte = ps2mult_getc_w();
-			if (byte == 0x00) {
-				mouse_found = 1;
-				puts(", mouse");
-			}
-		}
-	}
-
-	if (!mouse_found) {
-		while (byte >= 0) {
-			byte = ps2mult_getc_w();
-		}
-	}
-#endif
-
-	if (mouse_found || kbd_found) {
-		if (!received_selector) {
-			if (mouse_found) {
-				received_selector = PS2MULT_MS_SELECTOR;
-			} else {
-				received_selector = PS2MULT_KB_SELECTOR;
-			}
-		}
-
-		init_done = 1;
-	} else {
-		puts("No device found");
-	}
-
-	puts("\n");
-
-#if 0 /* for testing */
-	{
-		int i;
-		u_char key[] = {
-			0x1f, 0x12, 0x14, 0x12, 0x31, 0x2f, 0x39,	/* setenv */
-			0x1f, 0x14, 0x20, 0x17, 0x31, 0x39,		/* stdin */
-			0x1f, 0x12, 0x13, 0x17, 0x1e, 0x26, 0x1c,	/* serial */
-		};
-
-		for (i = 0; i < sizeof (key); i++) {
-			ps2mult_receive_byte (key[i],	     PS2MULT_KB_SELECTOR);
-			ps2mult_receive_byte (key[i] | 0x80, PS2MULT_KB_SELECTOR);
-		}
-	}
-#endif
-
-	return init_done ? 0 : -1;
-}
-
-int ps2mult_request_irq(void (*handler)(void *))
-{
-	keyb_handler = handler;
-
-	return 0;
-}
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
deleted file mode 100644
index 0b5ce06..0000000
--- a/drivers/input/ps2ser.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/***********************************************************************
- *
- * (C) Copyright 2004-2009
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * Simple 16550A serial driver
- *
- * Originally from linux source (drivers/char/ps2ser.c)
- *
- * Used by the PS/2 multiplexer driver (ps2mult.c)
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/atomic.h>
-#include <ps2mult.h>
-/* This is needed for ns16550.h */
-#ifndef CONFIG_SYS_NS16550_REG_SIZE
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#endif
-#include <ns16550.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* #define	DEBUG */
-
-#define PS2SER_BAUD	57600
-
-#if CONFIG_PS2SERIAL == 1
-#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
-#elif CONFIG_PS2SERIAL == 2
-#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600)
-#else
-#error CONFIG_PS2SERIAL must be in 1 ... 2
-#endif
-
-static int	ps2ser_getc_hw(void);
-static void	ps2ser_interrupt(void *dev_id);
-
-extern struct	serial_state rs_table[]; /* in serial.c */
-
-static u_char	ps2buf[PS2BUF_SIZE];
-static atomic_t	ps2buf_cnt;
-static int	ps2buf_in_idx;
-static int	ps2buf_out_idx;
-
-int ps2ser_init(void)
-{
-	NS16550_t com_port = (NS16550_t)COM_BASE;
-
-	com_port->ier = 0x00;
-	com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
-	com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
-	com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
-	com_port->lcr = UART_LCR_8N1;
-	com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS);
-	com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR);
-
-	return (0);
-}
-
-void ps2ser_putc(int chr)
-{
-	NS16550_t com_port = (NS16550_t)COM_BASE;
-	debug(">>>> 0x%02x\n", chr);
-
-	while ((com_port->lsr & UART_LSR_THRE) == 0);
-	com_port->thr = chr;
-}
-
-static int ps2ser_getc_hw(void)
-{
-	NS16550_t com_port = (NS16550_t)COM_BASE;
-	int res = -1;
-
-	if (com_port->lsr & UART_LSR_DR) {
-		res = com_port->rbr;
-	}
-
-	return res;
-}
-
-int ps2ser_getc(void)
-{
-	volatile int chr;
-	int flags;
-
-	debug("<< ");
-
-	flags = disable_interrupts();
-
-	do {
-		if (atomic_read(&ps2buf_cnt) != 0) {
-			chr = ps2buf[ps2buf_out_idx++];
-			ps2buf_out_idx &= (PS2BUF_SIZE - 1);
-			atomic_dec(&ps2buf_cnt);
-		} else {
-			chr = ps2ser_getc_hw();
-		}
-	}
-	while (chr < 0);
-
-	if (flags)
-		enable_interrupts();
-
-	debug("0x%02x\n", chr);
-
-	return chr;
-}
-
-int ps2ser_check(void)
-{
-	int flags;
-
-	flags = disable_interrupts();
-	ps2ser_interrupt(NULL);
-	if (flags) enable_interrupts();
-
-	return atomic_read(&ps2buf_cnt);
-}
-
-static void ps2ser_interrupt(void *dev_id)
-{
-	NS16550_t com_port = (NS16550_t)COM_BASE;
-	int chr;
-	int status;
-
-	do {
-		chr = ps2ser_getc_hw();
-		status = com_port->lsr;
-		if (chr < 0) continue;
-
-		if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) {
-			ps2buf[ps2buf_in_idx++] = chr;
-			ps2buf_in_idx &= (PS2BUF_SIZE - 1);
-			atomic_inc(&ps2buf_cnt);
-		} else {
-			printf ("ps2ser.c: buffer overflow\n");
-		}
-	} while (status & UART_LSR_DR);
-	if (atomic_read(&ps2buf_cnt)) {
-		ps2mult_callback(atomic_read(&ps2buf_cnt));
-	}
-}