diff options
author | Kuo-Jung Su <dantesu@faraday-tech.com> | 2013-05-08 15:36:26 +0800 |
---|---|---|
committer | Heiko Schocher <hs@denx.de> | 2013-07-23 08:34:58 +0200 |
commit | 3cff842bca8aa78fc49436711873466db9be21f8 (patch) | |
tree | fd6f4bf8ee61de718c88f11c4d9814ab47452ec3 /drivers/i2c | |
parent | 30ea41a489cbfed311f904bd08cb3319f0e73b72 (diff) | |
download | u-boot-3cff842bca8aa78fc49436711873466db9be21f8.zip u-boot-3cff842bca8aa78fc49436711873466db9be21f8.tar.gz u-boot-3cff842bca8aa78fc49436711873466db9be21f8.tar.bz2 |
i2c: add Faraday FTI2C010 I2C controller support
Faraday FTI2C010 is a multi-function I2C controller
which supports both master and slave mode.
This patch simplily implements the master mode only.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/Makefile | 1 | ||||
-rw-r--r-- | drivers/i2c/fti2c010.c | 369 | ||||
-rw-r--r-- | drivers/i2c/fti2c010.h | 81 |
3 files changed, 451 insertions, 0 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 360f93e..8f484f7 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_SH_I2C) += sh_i2c.o COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o COBJS-$(CONFIG_SYS_I2C) += i2c_core.o COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o +COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c new file mode 100644 index 0000000..24c4bb5 --- /dev/null +++ b/drivers/i2c/fti2c010.c @@ -0,0 +1,369 @@ +/* + * Faraday I2C Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include <common.h> +#include <asm/io.h> +#include <i2c.h> + +#include "fti2c010.h" + +#ifndef CONFIG_HARD_I2C +#error "fti2c010: CONFIG_HARD_I2C is not defined" +#endif + +#ifndef CONFIG_SYS_I2C_SPEED +#define CONFIG_SYS_I2C_SPEED 50000 +#endif + +#ifndef CONFIG_FTI2C010_FREQ +#define CONFIG_FTI2C010_FREQ clk_get_rate("I2C") +#endif + +/* command timeout */ +#define CFG_CMD_TIMEOUT 10 /* ms */ + +/* 7-bit chip address + 1-bit read/write */ +#define I2C_RD(chip) ((((chip) << 1) & 0xff) | 1) +#define I2C_WR(chip) (((chip) << 1) & 0xff) + +struct fti2c010_chip { + void __iomem *regs; + uint bus; + uint speed; +}; + +static struct fti2c010_chip chip_list[] = { + { + .bus = 0, + .regs = (void __iomem *)CONFIG_FTI2C010_BASE, + }, +#ifdef CONFIG_I2C_MULTI_BUS +# ifdef CONFIG_FTI2C010_BASE1 + { + .bus = 1, + .regs = (void __iomem *)CONFIG_FTI2C010_BASE1, + }, +# endif +# ifdef CONFIG_FTI2C010_BASE2 + { + .bus = 2, + .regs = (void __iomem *)CONFIG_FTI2C010_BASE2, + }, +# endif +# ifdef CONFIG_FTI2C010_BASE3 + { + .bus = 3, + .regs = (void __iomem *)CONFIG_FTI2C010_BASE3, + }, +# endif +#endif /* #ifdef CONFIG_I2C_MULTI_BUS */ +}; + +static struct fti2c010_chip *curr = chip_list; + +static int fti2c010_wait(uint32_t mask) +{ + int ret = -1; + uint32_t stat, ts; + struct fti2c010_regs *regs = curr->regs; + + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + stat = readl(®s->sr); + if ((stat & mask) == mask) { + ret = 0; + break; + } + } + + return ret; +} + +/* + * u-boot I2C API + */ + +/* + * Initialization, must be called once on start up, may be called + * repeatedly to change the speed and slave addresses. + */ +void i2c_init(int speed, int slaveaddr) +{ + if (speed || !curr->speed) + i2c_set_bus_speed(speed); + + /* if slave mode disabled */ + if (!slaveaddr) + return; + + /* + * TODO: + * Implement slave mode, but is it really necessary? + */ +} + +/* + * Probe the given I2C chip address. Returns 0 if a chip responded, + * not 0 on failure. + */ +int i2c_probe(uchar chip) +{ + int ret; + struct fti2c010_regs *regs = curr->regs; + + i2c_init(0, 0); + + /* 1. Select slave device (7bits Address + 1bit R/W) */ + writel(I2C_WR(chip), ®s->dr); + writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + + /* 2. Select device register */ + writel(0, ®s->dr); + writel(CR_ENABLE | CR_TBEN, ®s->cr); + ret = fti2c010_wait(SR_DT); + + return ret; +} + +/* + * Read/Write interface: + * chip: I2C chip address, range 0..127 + * addr: Memory (register) address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Where to read/write the data + * len: How many bytes to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int ret, pos; + uchar paddr[4]; + struct fti2c010_regs *regs = curr->regs; + + i2c_init(0, 0); + + paddr[0] = (addr >> 0) & 0xFF; + paddr[1] = (addr >> 8) & 0xFF; + paddr[2] = (addr >> 16) & 0xFF; + paddr[3] = (addr >> 24) & 0xFF; + + /* + * Phase A. Set register address + */ + + /* A.1 Select slave device (7bits Address + 1bit R/W) */ + writel(I2C_WR(chip), ®s->dr); + writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + + /* A.2 Select device register */ + for (pos = 0; pos < alen; ++pos) { + uint32_t ctrl = CR_ENABLE | CR_TBEN; + + writel(paddr[pos], ®s->dr); + writel(ctrl, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + } + + /* + * Phase B. Get register data + */ + + /* B.1 Select slave device (7bits Address + 1bit R/W) */ + writel(I2C_RD(chip), ®s->dr); + writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + + /* B.2 Get register data */ + for (pos = 0; pos < len; ++pos) { + uint32_t ctrl = CR_ENABLE | CR_TBEN; + uint32_t stat = SR_DR; + + if (pos == len - 1) { + ctrl |= CR_NAK | CR_STOP; + stat |= SR_ACK; + } + writel(ctrl, ®s->cr); + ret = fti2c010_wait(stat); + if (ret) + break; + buf[pos] = (uchar)(readl(®s->dr) & 0xFF); + } + + return ret; +} + +/* + * Read/Write interface: + * chip: I2C chip address, range 0..127 + * addr: Memory (register) address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Where to read/write the data + * len: How many bytes to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int ret, pos; + uchar paddr[4]; + struct fti2c010_regs *regs = curr->regs; + + i2c_init(0, 0); + + paddr[0] = (addr >> 0) & 0xFF; + paddr[1] = (addr >> 8) & 0xFF; + paddr[2] = (addr >> 16) & 0xFF; + paddr[3] = (addr >> 24) & 0xFF; + + /* + * Phase A. Set register address + * + * A.1 Select slave device (7bits Address + 1bit R/W) + */ + writel(I2C_WR(chip), ®s->dr); + writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + + /* A.2 Select device register */ + for (pos = 0; pos < alen; ++pos) { + uint32_t ctrl = CR_ENABLE | CR_TBEN; + + writel(paddr[pos], ®s->dr); + writel(ctrl, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + return ret; + } + + /* + * Phase B. Set register data + */ + for (pos = 0; pos < len; ++pos) { + uint32_t ctrl = CR_ENABLE | CR_TBEN; + + if (pos == len - 1) + ctrl |= CR_STOP; + writel(buf[pos], ®s->dr); + writel(ctrl, ®s->cr); + ret = fti2c010_wait(SR_DT); + if (ret) + break; + } + + return ret; +} + +/* + * Functions for setting the current I2C bus and its speed + */ +#ifdef CONFIG_I2C_MULTI_BUS + +/* + * i2c_set_bus_num: + * + * Change the active I2C bus. Subsequent read/write calls will + * go to this one. + * + * bus - bus index, zero based + * + * Returns: 0 on success, not 0 on failure + */ +int i2c_set_bus_num(uint bus) +{ + if (bus >= ARRAY_SIZE(chip_list)) + return -1; + curr = chip_list + bus; + i2c_init(0, 0); + return 0; +} + +/* + * i2c_get_bus_num: + * + * Returns index of currently active I2C bus. Zero-based. + */ + +uint i2c_get_bus_num(void) +{ + return curr->bus; +} + +#endif /* #ifdef CONFIG_I2C_MULTI_BUS */ + +/* + * i2c_set_bus_speed: + * + * Change the speed of the active I2C bus + * + * speed - bus speed in Hz + * + * Returns: 0 on success, not 0 on failure + */ +int i2c_set_bus_speed(uint speed) +{ + struct fti2c010_regs *regs = curr->regs; + uint clk = CONFIG_FTI2C010_FREQ; + uint gsr = 0, tsr = 32; + uint spd, div; + + if (!speed) + speed = CONFIG_SYS_I2C_SPEED; + + for (div = 0; div < 0x3ffff; ++div) { + /* SCLout = PCLK/(2*(COUNT + 2) + GSR) */ + spd = clk / (2 * (div + 2) + gsr); + if (spd <= speed) + break; + } + + if (curr->speed == spd) + return 0; + + writel(CR_I2CRST, ®s->cr); + mdelay(100); + if (readl(®s->cr) & CR_I2CRST) { + printf("fti2c010: reset timeout\n"); + return -1; + } + + curr->speed = spd; + + writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), ®s->tgsr); + writel(CDR_DIV(div), ®s->cdr); + + return 0; +} + +/* + * i2c_get_bus_speed: + * + * Returns speed of currently active I2C bus in Hz + */ + +uint i2c_get_bus_speed(void) +{ + return curr->speed; +} diff --git a/drivers/i2c/fti2c010.h b/drivers/i2c/fti2c010.h new file mode 100644 index 0000000..18aec2c --- /dev/null +++ b/drivers/i2c/fti2c010.h @@ -0,0 +1,81 @@ +/* + * Faraday I2C Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef __FTI2C010_H +#define __FTI2C010_H + +/* + * FTI2C010 registers + */ +struct fti2c010_regs { + uint32_t cr; /* 0x00: control register */ + uint32_t sr; /* 0x04: status register */ + uint32_t cdr; /* 0x08: clock division register */ + uint32_t dr; /* 0x0c: data register */ + uint32_t sar; /* 0x10: slave address register */ + uint32_t tgsr;/* 0x14: time & glitch suppression register */ + uint32_t bmr; /* 0x18: bus monitor register */ + uint32_t rsvd[5]; + uint32_t revr;/* 0x30: revision register */ +}; + +/* + * control register + */ +#define CR_ALIRQ 0x2000 /* arbitration lost interrupt (master) */ +#define CR_SAMIRQ 0x1000 /* slave address match interrupt (slave) */ +#define CR_STOPIRQ 0x800 /* stop condition interrupt (slave) */ +#define CR_NAKRIRQ 0x400 /* NACK response interrupt (master) */ +#define CR_DRIRQ 0x200 /* rx interrupt (both) */ +#define CR_DTIRQ 0x100 /* tx interrupt (both) */ +#define CR_TBEN 0x80 /* tx enable (both) */ +#define CR_NAK 0x40 /* NACK (both) */ +#define CR_STOP 0x20 /* stop (master) */ +#define CR_START 0x10 /* start (master) */ +#define CR_GCEN 0x8 /* general call support (slave) */ +#define CR_SCLEN 0x4 /* enable clock out (master) */ +#define CR_I2CEN 0x2 /* enable I2C (both) */ +#define CR_I2CRST 0x1 /* reset I2C (both) */ +#define CR_ENABLE \ + (CR_ALIRQ | CR_NAKRIRQ | CR_DRIRQ | CR_DTIRQ | CR_SCLEN | CR_I2CEN) + +/* + * status register + */ +#define SR_CLRAL 0x400 /* clear arbitration lost */ +#define SR_CLRGC 0x200 /* clear general call */ +#define SR_CLRSAM 0x100 /* clear slave address match */ +#define SR_CLRSTOP 0x80 /* clear stop */ +#define SR_CLRNAKR 0x40 /* clear NACK respond */ +#define SR_DR 0x20 /* rx ready */ +#define SR_DT 0x10 /* tx done */ +#define SR_BB 0x8 /* bus busy */ +#define SR_BUSY 0x4 /* chip busy */ +#define SR_ACK 0x2 /* ACK/NACK received */ +#define SR_RW 0x1 /* set when master-rx or slave-tx mode */ + +/* + * clock division register + */ +#define CDR_DIV(n) ((n) & 0x3ffff) + +/* + * time & glitch suppression register + */ +#define TGSR_GSR(n) (((n) & 0x7) << 10) +#define TGSR_TSR(n) ((n) & 0x3ff) + +/* + * bus monitor register + */ +#define BMR_SCL 0x2 /* SCL is pull-up */ +#define BMR_SDA 0x1 /* SDA is pull-up */ + +#endif /* __FTI2C010_H */ |