diff options
author | Heinrich Schuchardt <heinrich.schuchardt@canonical.com> | 2023-10-28 11:59:32 +0200 |
---|---|---|
committer | Heinrich Schuchardt <heinrich.schuchardt@canonical.com> | 2023-11-11 01:44:08 +0100 |
commit | b214e88071d1ea68c2f668740e4e227364214f5e (patch) | |
tree | 9350ba79cc6b28af37dc3d76764076cd4e9066af /doc | |
parent | 0e20948598b138972d26929d4dc323db5646dc08 (diff) | |
download | u-boot-b214e88071d1ea68c2f668740e4e227364214f5e.zip u-boot-b214e88071d1ea68c2f668740e4e227364214f5e.tar.gz u-boot-b214e88071d1ea68c2f668740e4e227364214f5e.tar.bz2 |
doc: shorten overlong title underlines
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Diffstat (limited to 'doc')
42 files changed, 85 insertions, 69 deletions
diff --git a/doc/arch/arm64.ffa.rst b/doc/arch/arm64.ffa.rst index 4ecdc31..f966f8b 100644 --- a/doc/arch/arm64.ffa.rst +++ b/doc/arch/arm64.ffa.rst @@ -40,7 +40,7 @@ The U-Boot FF-A support provides the following parts: - Sandbox FF-A test cases. FF-A and SMC specifications -------------------------------------------- +--------------------------- The current implementation of the U-Boot FF-A support relies on `FF-A v1.0 specification`_ and uses SMC32 calling convention which @@ -56,12 +56,12 @@ Hypervisors are supported if they are configured to trap SMC calls. The FF-A support uses 64-bit registers as per `SMC Calling Convention v1.2 specification`_. Supported hardware --------------------------------- +------------------ Aarch64 plaforms Configuration ----------------------- +------------- CONFIG_ARM_FFA_TRANSPORT Enables the FF-A support. Turn this on if you want to use FF-A @@ -70,7 +70,7 @@ CONFIG_ARM_FFA_TRANSPORT When using sandbox, the sandbox FF-A emulator and FF-A sandbox driver will be used. FF-A ABIs under the hood ---------------------------------------- +------------------------ Invoking an FF-A ABI involves providing to the secure world/hypervisor the expected arguments from the ABI. @@ -89,7 +89,7 @@ The driver reads the response and processes it accordingly. This methodology applies to all the FF-A ABIs. FF-A bus discovery on Arm 64-bit platforms ---------------------------------------------- +------------------------------------------ When CONFIG_ARM_FFA_TRANSPORT is enabled, the FF-A bus is considered as an architecture feature and discovered using ARM_SMCCC_FEATURES mechanism. @@ -136,7 +136,7 @@ When one of the above actions fails, probing fails and the driver stays not acti and can be probed again if needed. Requirements for clients -------------------------------------- +------------------------ When using the FF-A bus with EFI, clients must query the SPs they are looking for during EFI boot-time mode using the service UUID. @@ -159,13 +159,13 @@ the 32-bit or 64-bit version of FFA_MSG_SEND_DIRECT_{REQ, RESP}. The calling convention between U-Boot and the secure world stays the same: SMC32. Requirements for user drivers -------------------------------------- +----------------------------- Users who want to implement their custom FF-A device driver while reusing the FF-A Uclass can do so by implementing their own invoke_ffa_fn() in the user driver. The bus driver layer ------------------------------- +-------------------- FF-A support comes on top of the SMCCC layer and is implemented by the FF-A Uclass drivers/firmware/arm-ffa/arm-ffa-uclass.c @@ -210,7 +210,7 @@ The following features are provided: - FF-A bus can be compiled and used without EFI Relationship between the sandbox emulator and the FF-A device ---------------------------------------------------------------- +------------------------------------------------------------- :: @@ -222,7 +222,7 @@ Relationship between the sandbox emulator and the FF-A device ffa 0 [ ] sandbox_arm_ffa `-- sandbox-arm-ffa The armffa command ------------------------------------ +------------------ armffa is a command showcasing how to use the FF-A bus and how to invoke the driver operations. diff --git a/doc/board/AndesTech/ae350.rst b/doc/board/AndesTech/ae350.rst index 42a2b4d..99622fd 100644 --- a/doc/board/AndesTech/ae350.rst +++ b/doc/board/AndesTech/ae350.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ AE350 -====== +===== AE350 is the mainline SoC produced by Andes Technology using AndesV5 CPU core based on RISC-V architecture. diff --git a/doc/board/actions/cubieboard7.rst b/doc/board/actions/cubieboard7.rst index 74f2b12..1f73fc4 100644 --- a/doc/board/actions/cubieboard7.rst +++ b/doc/board/actions/cubieboard7.rst @@ -20,7 +20,7 @@ Though, one can enter ADFU mode and flash debian image(from host machine) where getting into u-boot prompt is easy. Enter ADFU Mode ----------------- +--------------- Before write the firmware, let the development board entering the ADFU mode: insert one end of the USB cable to the PC, press and hold the ADFU button, and then connect @@ -28,7 +28,7 @@ the other end of the USB cable to the Mini USB port of the development board, re the ADFU button, after connecting it will enter the ADFU mode. Check whether entered ADFU Mode --------------------------------- +------------------------------- The user needs to run the following command on the PC side to check if the ADFU device is detected. ID realted to "Actions Semiconductor Co., Ltd" means that diff --git a/doc/board/actions/index.rst b/doc/board/actions/index.rst index c596879..e925fcd 100644 --- a/doc/board/actions/index.rst +++ b/doc/board/actions/index.rst @@ -2,7 +2,7 @@ .. Copyright (C) 2020 Amit Singh Tomar <amittomer25@gmail.com> Actions -======== +======= .. toctree:: :maxdepth: 2 diff --git a/doc/board/armltd/index.rst b/doc/board/armltd/index.rst index fc1d75a..052a969 100644 --- a/doc/board/armltd/index.rst +++ b/doc/board/armltd/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 Arm Ltd -============= +======= .. toctree:: :maxdepth: 2 diff --git a/doc/board/mediatek/index.rst b/doc/board/mediatek/index.rst index 38cd8cb..c55d5ae 100644 --- a/doc/board/mediatek/index.rst +++ b/doc/board/mediatek/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ Mediatek -========= +======== .. toctree:: :maxdepth: 2 diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst index 327ce6e..bb11029 100644 --- a/doc/board/nxp/imx8mm_evk.rst +++ b/doc/board/nxp/imx8mm_evk.rst @@ -36,7 +36,7 @@ Get the ddr firmware $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) Build U-Boot for sd card --------------------------- +------------------------ .. code-block:: bash @@ -54,8 +54,8 @@ Boot ---- Set Boot switch to SD boot -Build U-Boot for qspi flash card ------------------------------------- +Build U-Boot for qspi flash card +-------------------------------- .. code-block:: bash @@ -81,7 +81,8 @@ From sd card to memory $ sf write $loadaddr 0x00 <size_of_flash.bin_in_hex> Boot from QSPI Flash ------------------------ +-------------------- + Set Boot Switch to QSPI Flash Pin configuration for imx8mm_revC evk to boot from qspi flash diff --git a/doc/board/nxp/ls1046ardb.rst b/doc/board/nxp/ls1046ardb.rst index 49b4842..8c0bc82 100644 --- a/doc/board/nxp/ls1046ardb.rst +++ b/doc/board/nxp/ls1046ardb.rst @@ -54,7 +54,7 @@ LS1046ARDB board Overview - ARM JTAG support Memory map from core's view ----------------------------- +--------------------------- ================== ================== ================ ===== Start Address End Address Description Size diff --git a/doc/board/nxp/mx6ul_14x14_evk.rst b/doc/board/nxp/mx6ul_14x14_evk.rst index 3e57ba1..c135a21 100644 --- a/doc/board/nxp/mx6ul_14x14_evk.rst +++ b/doc/board/nxp/mx6ul_14x14_evk.rst @@ -4,7 +4,7 @@ mx6ul_14x14_evk =============== How to use U-Boot on Freescale MX6UL 14x14 EVK ------------------------------------------------ +---------------------------------------------- - Build U-Boot for MX6UL 14x14 EVK: diff --git a/doc/board/openpiton/riscv64.rst b/doc/board/openpiton/riscv64.rst index 3a97793..c379fbf 100644 --- a/doc/board/openpiton/riscv64.rst +++ b/doc/board/openpiton/riscv64.rst @@ -11,14 +11,14 @@ OpenPiton has been verified in both ASIC and multiple Xilinx FPGA prototypes running full-stack Debian linux. RISC-V Standard Bootflow -------------------------- +------------------------ Currently, OpenPiton implements RISC-V standard bootflow in the following steps mover.S -> u-boot-spl -> opensbi -> u-boot -> Linux This board supports S-mode u-boot as well as M-mode SPL Building OpenPition ---------------------- +------------------- If you'd like to build OpenPiton, please go to OpenPiton github repo (at https://github.com/PrincetonUniversity/openpiton) to build from the latest diff --git a/doc/board/purism/librem5.rst b/doc/board/purism/librem5.rst index fb050c6..a7975e1 100644 --- a/doc/board/purism/librem5.rst +++ b/doc/board/purism/librem5.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ Librem5 -========== +======= U-Boot for the Purism Librem5 phone diff --git a/doc/board/qualcomm/sdm845.rst b/doc/board/qualcomm/sdm845.rst index d3f218e..a65f00d 100644 --- a/doc/board/qualcomm/sdm845.rst +++ b/doc/board/qualcomm/sdm845.rst @@ -2,10 +2,11 @@ .. sectionauthor:: Dzmitry Sankouski <dsankouski@gmail.com> Snapdragon 845 -================ +============== About this ---------- + This document describes the information about Qualcomm Snapdragon 845 supported boards and it's usage steps. @@ -17,8 +18,10 @@ Qualcomm's UEFI-based ABL (Android) Bootloader. Installation ------------ + Build ^^^^^ + Setup ``CROSS_COMPILE`` for aarch64 and build U-Boot for your board:: $ export CROSS_COMPILE=<aarch64 toolchain prefix> @@ -29,10 +32,12 @@ This will build ``u-boot.bin`` in the configured output directory. Generate FIT image ^^^^^^^^^^^^^^^^^^ + See doc/uImage.FIT for more details Pack android boot image ^^^^^^^^^^^^^^^^^^^^^^^ + We'll assemble android boot image with ``u-boot.bin`` instead of linux kernel, and FIT image instead of ``initramfs``. Android bootloader expect gzipped kernel with appended dtb, so let's mimic linux to satisfy stock bootloader. diff --git a/doc/board/samsung/index.rst b/doc/board/samsung/index.rst index c904372..971805e 100644 --- a/doc/board/samsung/index.rst +++ b/doc/board/samsung/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ Samsung -======== +======= .. toctree:: :maxdepth: 2 diff --git a/doc/board/st/st-dt.rst b/doc/board/st/st-dt.rst index 67e16ef..2a285c8 100644 --- a/doc/board/st/st-dt.rst +++ b/doc/board/st/st-dt.rst @@ -2,7 +2,7 @@ .. sectionauthor:: Patrick Delaunay <patrick.delaunay@foss.st.com> U-Boot device tree bindings ----------------------------- +--------------------------- The U-Boot specific bindings are defined in the U-Boot directory: doc/device-tree-bindings diff --git a/doc/board/st/stm32_MCU.rst b/doc/board/st/stm32_MCU.rst index 7ff7c73..61650bc 100644 --- a/doc/board/st/stm32_MCU.rst +++ b/doc/board/st/stm32_MCU.rst @@ -2,7 +2,7 @@ .. sectionauthor:: Patrice Chotard <patrice.chotardy@foss.st.com> STM32 MCU boards -================= +================ This is a quick instruction for setup STM32 MCU boards. diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst index 9ee758e..6cb033e 100644 --- a/doc/board/starfive/visionfive2.rst +++ b/doc/board/starfive/visionfive2.rst @@ -4,7 +4,8 @@ StarFive VisionFive2 ==================== JH7110 RISC-V SoC ---------------------- +----------------- + The JH7110 is 4+1 64-bit RISC-V SoC from StarFive. The StarFive VisionFive2 development platform is based on JH7110 and capable diff --git a/doc/board/thead/index.rst b/doc/board/thead/index.rst index 41566d3..2c4b3fb 100644 --- a/doc/board/thead/index.rst +++ b/doc/board/thead/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ T-HEAD -======== +====== .. toctree:: :maxdepth: 1 diff --git a/doc/board/ti/am62x_beagleplay.rst b/doc/board/ti/am62x_beagleplay.rst index 39913b2..17738ea 100644 --- a/doc/board/ti/am62x_beagleplay.rst +++ b/doc/board/ti/am62x_beagleplay.rst @@ -70,7 +70,7 @@ Set the variables corresponding to this platform: :end-before: .. am62x_evm_rst_include_end_build_steps Target Images --------------- +------------- Copy the below images to an SD card and boot: * tiboot3-am62x-gp-evm.bin from R5 build as tiboot3.bin @@ -109,7 +109,7 @@ There are multiple storage media options on BeaglePlay, but primarily: depends on the SD card quality. Flash to uSD card or how to deal with "bricked" Board --------------------------------------------------------- +----------------------------------------------------- When deploying or working on Linux, it's common to use the onboard eMMC. However, avoiding the eMMC and using the uSD card is safer when diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst index d7437c6..4703ce6 100644 --- a/doc/board/ti/am62x_sk.rst +++ b/doc/board/ti/am62x_sk.rst @@ -2,7 +2,7 @@ .. sectionauthor:: Vignesh Raghavendra <vigneshr@ti.com> AM62 Platforms -=============== +============== Introduction: ------------- @@ -117,7 +117,8 @@ Set the variables corresponding to this platform: .. am62x_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC variant (GP, HS-FS, HS-SE) requires a different source for these files. diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst index db27461..69afee0 100644 --- a/doc/board/ti/am64x_evm.rst +++ b/doc/board/ti/am64x_evm.rst @@ -107,7 +107,8 @@ Set the variables corresponding to this platform: .. am64x_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC variant (GP, HS-FS, HS-SE) requires a different source for these files. diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst index bf9e4c4..0e96e31 100644 --- a/doc/board/ti/am65x_evm.rst +++ b/doc/board/ti/am65x_evm.rst @@ -117,7 +117,8 @@ Set the variables corresponding to this platform: .. am65x_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img. Each SoC variant (GP and HS) requires a different source for these files. diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst index 35b5541..5653c2e 100644 --- a/doc/board/ti/j7200_evm.rst +++ b/doc/board/ti/j7200_evm.rst @@ -106,7 +106,8 @@ Set the variables corresponding to this platform: .. j7200_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC variant (GP, HS-FS, HS-SE) requires a different source for these files. diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index cbb7da6..5f14e45 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -111,7 +111,8 @@ Set the variables corresponding to this platform: .. j721e_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img. Each SoC variant (GP, HS-FS and HS-SE) requires a different source for these files. diff --git a/doc/board/ti/j721s2_evm.rst b/doc/board/ti/j721s2_evm.rst index fec2aca..5fbe608 100644 --- a/doc/board/ti/j721s2_evm.rst +++ b/doc/board/ti/j721s2_evm.rst @@ -6,6 +6,7 @@ J721S2 and AM68 Platforms Introduction: ------------- + The J721S2 family of SoCs are part of K3 Multicore SoC architecture platform targeting automotive applications. They are designed as a low power, high performance and highly integrated device architecture, adding significant @@ -38,6 +39,7 @@ Platform information: Boot Flow: ---------- + Below is the pictorial representation of boot flow: .. image:: img/boot_diagram_k3_current.svg @@ -60,6 +62,7 @@ Sources: Build procedure: ---------------- + 0. Setup the environment variables: .. include:: k3.rst @@ -120,7 +123,8 @@ Set the variables corresponding to this platform: .. j721s2_evm_rst_include_end_build_steps Target Images --------------- +------------- + In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC variant (GP, HS-FS, HS-SE) requires a different source for these files. diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 89d70db..1629d3b 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -238,7 +238,7 @@ other build sources. we shall use the following, in the build descriptions below .. k3_rst_include_end_board_env_vars_desc Building tiboot3.bin -^^^^^^^^^^^^^^^^^^^^^ +^^^^^^^^^^^^^^^^^^^^ 1. To generate the U-Boot SPL for the wakeup domain, use the following commands, substituting :code:`{SOC}` for the name of your device (eg: @@ -273,7 +273,7 @@ domain of your K3 SoC. UBoot SPL will only look for and load the files with these names. Building tispl.bin -^^^^^^^^^^^^^^^^^^^ +^^^^^^^^^^^^^^^^^^ The `tispl.bin` is a standard fitImage combining the firmware need for the main domain to function properly as well as Device Management (DM) diff --git a/doc/board/xilinx/xilinx.rst b/doc/board/xilinx/xilinx.rst index 8c9afb4..5464625 100644 --- a/doc/board/xilinx/xilinx.rst +++ b/doc/board/xilinx/xilinx.rst @@ -2,7 +2,7 @@ .. (C) Copyright 2019 Xilinx, Inc. U-Boot device tree bindings ----------------------------- +--------------------------- All the device tree bindings used in U-Boot are specified in Linux kernel. Please refer dt bindings from below specified paths in Linux diff --git a/doc/build/source.rst b/doc/build/source.rst index 470f793..d21ee05 100644 --- a/doc/build/source.rst +++ b/doc/build/source.rst @@ -1,5 +1,5 @@ Obtaining the source -===================== +==================== The source of the U-Boot project is maintained in a Git repository. diff --git a/doc/develop/driver-model/ethernet.rst b/doc/develop/driver-model/ethernet.rst index cdbccca..73c3a72 100644 --- a/doc/develop/driver-model/ethernet.rst +++ b/doc/develop/driver-model/ethernet.rst @@ -1,5 +1,5 @@ Ethernet Driver Guide -======================= +===================== The networking stack in Das U-Boot is designed for multiple network devices to be easily added and controlled at runtime. This guide is meant for people @@ -14,7 +14,7 @@ Some drivers are still using the old Ethernet interface, differences between the two and hints about porting will be handled at the end. Driver framework ------------------- +---------------- A network driver following the driver model must declare itself using the UCLASS_ETH .id field in the U-Boot driver struct: @@ -67,7 +67,7 @@ bus. Also it would take care of any special PHY setup (power rails, enable bits for internal PHYs, etc.). Driver methods ----------------- +-------------- The real work will be done in the driver method functions the driver provides by defining the members of struct eth_ops: @@ -158,7 +158,7 @@ So the call graph at this stage would look something like: CONFIG_PHYLIB / CONFIG_CMD_MII --------------------------------- +------------------------------ If your device supports banging arbitrary values on the MII bus (pretty much every device does), you should add support for the mii command. Doing so is @@ -193,7 +193,7 @@ should logically follow. ................................................................ Legacy network drivers ------------------------- +---------------------- !!! WARNING !!! @@ -221,7 +221,7 @@ instructions on how to port this over. For the records, the old way of initialising a network driver is as follows: Old network driver registration -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When U-Boot initializes, it will call the common function eth_initialize(). This will in turn call the board-specific board_eth_init() (or if that fails, diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst index fe1ae21..03fea94 100644 --- a/doc/develop/driver-model/migration.rst +++ b/doc/develop/driver-model/migration.rst @@ -100,7 +100,7 @@ Maintainers should submit patches switching over to using CONFIG_DM_I2C and other base driver model options in time for inclusion in the 2021.10 release. CFG_SYS_TIMER_RATE and CFG_SYS_TIMER_COUNTER --------------------------------------------------- +-------------------------------------------- Deadline: 2023.01 These are legacy options which have been replaced by driver model. diff --git a/doc/develop/driver-model/nvmxip.rst b/doc/develop/driver-model/nvmxip.rst index e85dc22..4a7650c 100644 --- a/doc/develop/driver-model/nvmxip.rst +++ b/doc/develop/driver-model/nvmxip.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ NVM XIP Block Storage Emulation Driver -======================================= +====================================== Summary ------- @@ -54,12 +54,12 @@ The NVMXIP Uclass provides the following drivers: The implementation is generic and can be used by different platforms. Supported hardware --------------------------------- +------------------ Any plaform supporting readq(). Configuration ----------------------- +------------- config NVMXIP This option allows the emulation of a block storage device @@ -77,7 +77,7 @@ config NVMXIP_QSPI write their own driver (same as nvmxip_qspi in addition to the custom settings). Device Tree nodes --------------------- +----------------- Multiple QSPI XIP flash devices can be used at the same time by describing them through DT nodes. diff --git a/doc/develop/driver-model/spi-howto.rst b/doc/develop/driver-model/spi-howto.rst index 97fbf75..9dc3b9b 100644 --- a/doc/develop/driver-model/spi-howto.rst +++ b/doc/develop/driver-model/spi-howto.rst @@ -218,7 +218,7 @@ DM tells you. The name is not quite right. So in this case we would use: Write of_to_plat() [for device tree only] -------------------------------------------------- +----------------------------------------- This method will convert information in the device tree node into a C structure in your driver (called platform data). If you are not using diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index 2f25fc8..8a46c0e 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -220,7 +220,7 @@ setting the GPIO (on twister GPIO 55 is used) to kernel mode. The kernel is loaded directly by the SPL without passing through U-Boot. Example with FDT: a3m071 board -------------------------------- +------------------------------ To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get prepared/patched first. U-Boot usually inserts some dynamic values into diff --git a/doc/usage/cmd/askenv.rst b/doc/usage/cmd/askenv.rst index 347bd59..b85cefa 100644 --- a/doc/usage/cmd/askenv.rst +++ b/doc/usage/cmd/askenv.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: askenv command -=============== +============== Synopsis -------- diff --git a/doc/usage/cmd/bootdev.rst b/doc/usage/cmd/bootdev.rst index 6c68d0b..fb638b5 100644 --- a/doc/usage/cmd/bootdev.rst +++ b/doc/usage/cmd/bootdev.rst @@ -76,7 +76,7 @@ name is provided, all hunters are run. bootdev select -~~~~~~~~~~~~~~~~~ +~~~~~~~~~~~~~~ Use this to select a particular bootdev. You can select it by the sequence number or name, as shown in `bootdev list`. @@ -89,7 +89,7 @@ unselected. bootdev info -~~~~~~~~~~~~~~~ +~~~~~~~~~~~~ This shows information on the current bootdev, with the format looking like this: diff --git a/doc/usage/cmd/cat.rst b/doc/usage/cmd/cat.rst index 5ef4731..5aaf497 100644 --- a/doc/usage/cmd/cat.rst +++ b/doc/usage/cmd/cat.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: cat command -=============== +=========== Synopsis -------- diff --git a/doc/usage/cmd/coninfo.rst b/doc/usage/cmd/coninfo.rst index f913148..76cb6c3 100644 --- a/doc/usage/cmd/coninfo.rst +++ b/doc/usage/cmd/coninfo.rst @@ -21,7 +21,7 @@ environment variables stdin, stdout, stderr which contain a comma separated list of device names. Example --------- +------- .. code-block:: console diff --git a/doc/usage/cmd/mmc.rst b/doc/usage/cmd/mmc.rst index c0924ba..8394f64 100644 --- a/doc/usage/cmd/mmc.rst +++ b/doc/usage/cmd/mmc.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: mmc command -============ +=========== Synopsis -------- diff --git a/doc/usage/cmd/part.rst b/doc/usage/cmd/part.rst index 8a594aa..eee5225 100644 --- a/doc/usage/cmd/part.rst +++ b/doc/usage/cmd/part.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: part command -=============== +============ Synopis ------- diff --git a/doc/usage/cmd/wdt.rst b/doc/usage/cmd/wdt.rst index 8d80433..8bb8b36 100644 --- a/doc/usage/cmd/wdt.rst +++ b/doc/usage/cmd/wdt.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: wdt command -============ +=========== Synopsis -------- diff --git a/doc/usage/cmd/xxd.rst b/doc/usage/cmd/xxd.rst index 0de1223..13bb438 100644 --- a/doc/usage/cmd/xxd.rst +++ b/doc/usage/cmd/xxd.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+: xxd command -=============== +=========== Synopsis -------- diff --git a/doc/usage/fit/beaglebone_vboot.rst b/doc/usage/fit/beaglebone_vboot.rst index 0580ee1..a102be1 100644 --- a/doc/usage/fit/beaglebone_vboot.rst +++ b/doc/usage/fit/beaglebone_vboot.rst @@ -86,7 +86,7 @@ c. You will now have a U-Boot image:: Step 2: Build Linux --------------------- +------------------- a. Find the kernel image ('Image') and device tree (.dtb) file you plan to use. In our case it is am335x-boneblack.dtb and it is built with the kernel. diff --git a/doc/usage/measured_boot.rst b/doc/usage/measured_boot.rst index 0aad590..9691904 100644 --- a/doc/usage/measured_boot.rst +++ b/doc/usage/measured_boot.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+ Measured Boot -===================== +============= U-Boot can perform a measured boot, the process of hashing various components of the boot process, extending the results in the TPM and logging the @@ -16,7 +16,7 @@ TPM PCRs match the contents of the event log. This can further be checked against the hash results of previous boots. Requirements ---------------------- +------------ * A hardware TPM 2.0 supported by the U-Boot drivers * CONFIG_TPM=y |