diff options
author | Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-teki@xilinx.com> | 2014-01-09 01:48:31 +0530 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-01-10 15:18:33 +0100 |
commit | 10a147bc665367111920be657409a5d56d3c0590 (patch) | |
tree | 20e6d18b569476355d50d1462eea78df55482c6a /doc | |
parent | c91d0c74cfe4c6c6e155392a6b057fa868719297 (diff) | |
download | u-boot-10a147bc665367111920be657409a5d56d3c0590.zip u-boot-10a147bc665367111920be657409a5d56d3c0590.tar.gz u-boot-10a147bc665367111920be657409a5d56d3c0590.tar.bz2 |
doc: Update the zynq u-boot status
Updated doc/README.zynq to current status
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.zynq | 29 |
1 files changed, 21 insertions, 8 deletions
diff --git a/doc/README.zynq b/doc/README.zynq index ea1c8c1..043c970 100644 --- a/doc/README.zynq +++ b/doc/README.zynq @@ -28,7 +28,19 @@ and I/O programmability. - zc770-xm012 (nor) - zc770-xm013 (dual parallel qspi, gem1) -3. Bootmode +3. Building + + # Configure for zc70x board + $ make zynq_zc70x_config + Configuring for zynq_zc70x board... + + # Building default dts for zc702 board + $ make + + # Building specified dts for zc706 board + $ make DEVICE_TREE=zynq-zc706 + +4. Bootmode Zynq has a facility to read the bootmode from the slcr bootmode register once user is setting through jumpers on the board - see page no:1546 on [5] @@ -48,11 +60,11 @@ SLCR bootmode register Bit[3:0] values "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot" bootmode strings at runtime. -4. Mainline status +5. Mainline status - Added basic board configurations support. - Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq -- Added zynq boards named - zynq, zynq_dcc +- Added zynq boards named - zc70x, zed, microzed, zc770_xm010, zc770_xm012, zc770_xm013 - Added zynq drivers: serial - drivers/serial/serial_zynq.c net - drivers/net/zynq_gem.c @@ -60,15 +72,16 @@ bootmode strings at runtime. mmc - drivers/mmc/zynq_sdhci.c spi- drivers/spi/zynq_spi.c i2c - drivers/i2c/zynq_i2c.c +- Done proper cleanups on board configurations +- Added basic FDT support for zynq boards +- d-cache support for zynq_gem.c -5. TODO +6. TODO -- Add zynq boards support - zc70x, zed, microzed, zc770 +- Add zynq boards support - zc770_xm011 - Add zynq qspi controller driver - Add zynq nand controller driver -- d-cache support for zynq_gem.c -- FDT support for zynq boards -- Need proper cleanups on board configurations +- Add FDT support on individual drivers [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm [2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm |