aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2019-04-12 15:43:19 -0400
committerTom Rini <trini@konsulko.com>2019-04-12 15:43:19 -0400
commit015289580f81733f7358227743e3e5881653a797 (patch)
treebeca1eea1bfa7b4e4740b9e7a08493711b7b8bee /doc
parentdd758c6720266c9b7bcd8d0da91a64a2fa1e181a (diff)
parent7bb75023a720432a32840c6df543aae92653b23d (diff)
downloadu-boot-015289580f81733f7358227743e3e5881653a797.zip
u-boot-015289580f81733f7358227743e3e5881653a797.tar.gz
u-boot-015289580f81733f7358227743e3e5881653a797.tar.bz2
Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-boot
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
Diffstat (limited to 'doc')
-rw-r--r--doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt59
1 files changed, 59 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt
new file mode 100644
index 0000000..70e76be
--- /dev/null
+++ b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt
@@ -0,0 +1,59 @@
+STMicroelectronics Flexible Memory Controller 2 (FMC2)
+NAND Interface
+
+Required properties:
+- compatible: Should be one of:
+ * st,stm32mp15-fmc2
+- reg: NAND flash controller memory areas.
+ First region contains the register location.
+ Regions 2 to 4 respectively contain the data, command,
+ and address space for CS0.
+ Regions 5 to 7 contain the same areas for CS1.
+- interrupts: The interrupt number
+- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+- clocks: The clock needed by the NAND flash controller
+
+Optional properties:
+- resets: Reference to a reset controller asserting the FMC controller
+- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
+- dma-names: Must be "tx", "rx" and "ecc"
+
+Optional children nodes:
+Children nodes represent the available NAND chips.
+
+Optional properties:
+- nand-on-flash-bbt: see nand.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: see nand.txt
+
+The following ECC strength and step size are currently supported:
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
+ - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
+ - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
+
+Example:
+
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fmc_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };