blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/*

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

18 files changed, 0 insertions, 2757 deletions

diff --git a/cpu/blackfin/.gitignore b/cpu/blackfin/.gitignore
deleted file mode 100644
index 0ec9d56..0000000
--- a/cpu/blackfin/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-bootrom-asm-offsets.[chs]
diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile
deleted file mode 100644
index 211b8d5..0000000
--- a/cpu/blackfin/Makefile
+++ /dev/null
@@ -1,73 +0,0 @@
-#
-# U-boot - Makefile
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Licensed under the GPL-2 or later.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-EXTRA    :=
-CEXTRA   := initcode.o
-SEXTRA   := start.o
-SOBJS    := interrupt.o cache.o
-COBJS-y  += cpu.o
-COBJS-y  += interrupts.o
-COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o
-COBJS-y  += os_log.o
-COBJS-y  += reset.o
-COBJS-y  += serial.o
-COBJS-y  += traps.o
-COBJS-$(CONFIG_HW_WATCHDOG)  += watchdog.o
-
-ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
-COBJS-y  += initcode.o
-endif
-
-SRCS     := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS     := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
-EXTRA    := $(addprefix $(obj),$(EXTRA))
-CEXTRA   := $(addprefix $(obj),$(CEXTRA))
-SEXTRA   := $(addprefix $(obj),$(SEXTRA))
-
-all:	$(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-$(OBJS): $(obj)bootrom-asm-offsets.h
-$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk
-	echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp
-	mv $@.tmp $@
-$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c
-	$(CC) $(CFLAGS) -S $^ -o $@.tmp
-	mv $@.tmp $@
-$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s
-	sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@
-
-# make sure our initcode (which goes into LDR) does not
-# have relocs or external references
-$(obj)initcode.o: CFLAGS += -fno-function-sections -fno-data-sections
-READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $<
-check_initcode: $(obj)initcode.o
-ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
-	@if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \
-		echo "$< contains external references!" 1>&2 ; \
-		exit 1 ; \
-	fi
-endif
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/blackfin/bootrom-asm-offsets.awk b/cpu/blackfin/bootrom-asm-offsets.awk
deleted file mode 100755
index 1d61824..0000000
--- a/cpu/blackfin/bootrom-asm-offsets.awk
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/usr/bin/gawk -f
-BEGIN {
-	print "/* DO NOT EDIT: AUTOMATICALLY GENERATED"
-	print " * Input files: bootrom-asm-offsets.awk bootrom-asm-offsets.c.in"
-	print " * DO NOT EDIT: AUTOMATICALLY GENERATED"
-	print " */"
-	print ""
-	system("cat bootrom-asm-offsets.c.in")
-	print "{"
-}
-
-{
-	/* find a structure definition */
-	if ($0 ~ /typedef struct .* {/) {
-		delete members;
-		i = 0;
-
-		/* extract each member of the structure */
-		while (1) {
-			getline
-			if ($1 == "}")
-				break;
-			gsub(/[*;]/, "");
-			members[i++] = $NF;
-		}
-
-		/* grab the structure's name */
-		struct = $NF;
-		sub(/;$/, "", struct);
-
-		/* output the DEFINE() macros */
-		while (i-- > 0)
-			print "\tDEFINE(" struct ", " members[i] ");"
-		print ""
-	}
-}
-
-END {
-	print "\treturn 0;"
-	print "}"
-}
diff --git a/cpu/blackfin/bootrom-asm-offsets.c.in b/cpu/blackfin/bootrom-asm-offsets.c.in
deleted file mode 100644
index 3146e46..0000000
--- a/cpu/blackfin/bootrom-asm-offsets.c.in
+++ /dev/null
@@ -1,12 +0,0 @@
-/* A little trick taken from the kernel asm-offsets.h where we convert
- * the C structures automatically into a bunch of defines for use in
- * the assembly files.
- */
-
-#include <linux/stddef.h>
-#include <asm/mach-common/bits/bootrom.h>
-
-#define _DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-#define DEFINE(s, m) _DEFINE(offset_##s##_##m, offsetof(s, m))
-
-int main(int argc, char *argv[])
diff --git a/cpu/blackfin/cache.S b/cpu/blackfin/cache.S
deleted file mode 100644
index 6ed655a..0000000
--- a/cpu/blackfin/cache.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Blackfin cache control code
- *
- * Copyright 2003-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/linkage.h>
-#include <config.h>
-#include <asm/blackfin.h>
-
-.text
-/* Since all L1 caches work the same way, we use the same method for flushing
- * them.  Only the actual flush instruction differs.  We write this in asm as
- * GCC can be hard to coax into writing nice hardware loops.
- *
- * Also, we assume the following register setup:
- * R0 = start address
- * R1 = end address
- */
-.macro do_flush flushins:req optflushins optnopins label
-
-	R2 = -L1_CACHE_BYTES;
-
-	/* start = (start & -L1_CACHE_BYTES) */
-	R0 = R0 & R2;
-
-	/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
-	R1 += -1;
-	R1 = R1 & R2;
-	R1 += L1_CACHE_BYTES;
-
-	/* count = (end - start) >> L1_CACHE_SHIFT */
-	R2 = R1 - R0;
-	R2 >>= L1_CACHE_SHIFT;
-	P1 = R2;
-
-.ifnb \label
-\label :
-.endif
-	P0 = R0;
-	LSETUP (1f, 2f) LC1 = P1;
-1:
-.ifnb \optflushins
-	\optflushins [P0];
-.endif
-#if ANOMALY_05000443
-.ifb \optnopins
-2:
-.endif
-	\flushins [P0++];
-.ifnb \optnopins
-2:	\optnopins;
-.endif
-#else
-2:	\flushins [P0++];
-#endif
-
-	RTS;
-.endm
-
-/* Invalidate all instruction cache lines assocoiated with this memory area */
-ENTRY(_blackfin_icache_flush_range)
-	do_flush IFLUSH, , nop
-ENDPROC(_blackfin_icache_flush_range)
-
-/* Flush all cache lines assocoiated with this area of memory. */
-ENTRY(_blackfin_icache_dcache_flush_range)
-	do_flush FLUSH, IFLUSH
-ENDPROC(_blackfin_icache_dcache_flush_range)
-
-/* Throw away all D-cached data in specified region without any obligation to
- * write them back.  Since the Blackfin ISA does not have an "invalidate"
- * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
- * could bang on the DTEST MMRs ...
- */
-ENTRY(_blackfin_dcache_flush_invalidate_range)
-	do_flush FLUSHINV
-ENDPROC(_blackfin_dcache_flush_invalidate_range)
-
-/* Flush all data cache lines assocoiated with this memory area */
-ENTRY(_blackfin_dcache_flush_range)
-	do_flush FLUSH, , , .Ldfr
-ENDPROC(_blackfin_dcache_flush_range)
diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c
deleted file mode 100644
index 2c8fd86..0000000
--- a/cpu/blackfin/cpu.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * U-boot - cpu.c CPU specific functions
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/ebiu.h>
-#include <asm/mach-common/bits/trace.h>
-
-#include "cpu.h"
-#include "serial.h"
-
-ulong bfin_poweron_retx;
-
-__attribute__ ((__noreturn__))
-void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
-{
-#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
-	/* Build a NOP slide over the LDR jump block.  Whee! */
-	char nops[0xC];
-	serial_early_puts("NOP Slide\n");
-	memset(nops, 0x00, sizeof(nops));
-	memcpy((void *)L1_INST_SRAM, nops, sizeof(nops));
-#endif
-
-	if (!loaded_from_ldr) {
-		/* Relocate sections into L1 if the LDR didn't do it -- don't
-		 * check length because the linker script does the size
-		 * checking at build time.
-		 */
-		serial_early_puts("L1 Relocate\n");
-		extern char _stext_l1[], _text_l1_lma[], _text_l1_len[];
-		memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len);
-		extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[];
-		memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len);
-	}
-#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
-	/* The BF537 bootrom will reset the EBIU_AMGCTL register on us
-	 * after it has finished loading the LDR.  So configure it again.
-	 */
-	else
-		bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
-#endif
-
-	/* Save RETX so we can pass it while booting Linux */
-	bfin_poweron_retx = bootflag;
-
-#ifdef CONFIG_DEBUG_DUMP
-	/* Turn on hardware trace buffer */
-	bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
-#endif
-
-#ifndef CONFIG_PANIC_HANG
-	/* Reset upon a double exception rather than just hanging.
-	 * Do not do bfin_read on SWRST as that will reset status bits.
-	 */
-	bfin_write_SWRST(DOUBLE_FAULT);
-#endif
-
-	serial_early_puts("Board init flash\n");
-	board_init_f(bootflag);
-}
-
-int exception_init(void)
-{
-	bfin_write_EVT3(trap);
-	return 0;
-}
-
-int irq_init(void)
-{
-#ifdef SIC_IMASK0
-	bfin_write_SIC_IMASK0(0);
-	bfin_write_SIC_IMASK1(0);
-# ifdef SIC_IMASK2
-	bfin_write_SIC_IMASK2(0);
-# endif
-#elif defined(SICA_IMASK0)
-	bfin_write_SICA_IMASK0(0);
-	bfin_write_SICA_IMASK1(0);
-#else
-	bfin_write_SIC_IMASK(0);
-#endif
-	bfin_write_EVT2(evt_default);	/* NMI */
-	bfin_write_EVT5(evt_default);	/* hardware error */
-	bfin_write_EVT6(evt_default);	/* core timer */
-	bfin_write_EVT7(evt_default);
-	bfin_write_EVT8(evt_default);
-	bfin_write_EVT9(evt_default);
-	bfin_write_EVT10(evt_default);
-	bfin_write_EVT11(evt_default);
-	bfin_write_EVT12(evt_default);
-	bfin_write_EVT13(evt_default);
-	bfin_write_EVT14(evt_default);
-	bfin_write_EVT15(evt_default);
-	bfin_write_ILAT(0);
-	CSYNC();
-	/* enable hardware error irq */
-	irq_flags = 0x3f;
-	local_irq_enable();
-	return 0;
-}
diff --git a/cpu/blackfin/cpu.h b/cpu/blackfin/cpu.h
deleted file mode 100644
index 0a13c28..0000000
--- a/cpu/blackfin/cpu.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  U-boot - cpu.h
- *
- *  Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef _CPU_H_
-#define _CPU_H_
-
-#include <command.h>
-
-void board_reset(void) __attribute__((__weak__));
-void bfin_reset_or_hang(void) __attribute__((__noreturn__));
-void bfin_panic(struct pt_regs *reg);
-void dump(struct pt_regs *regs);
-
-asmlinkage void trap(void);
-asmlinkage void evt_default(void);
-
-#endif
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
deleted file mode 100644
index 5f80ad6..0000000
--- a/cpu/blackfin/initcode.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * initcode.c - Initialize the processor.  This is usually entails things
- * like external memory, voltage regulators, etc...  Note that this file
- * cannot make any function calls as it may be executed all by itself by
- * the Blackfin's bootrom in LDR format.
- *
- * Copyright (c) 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define BFIN_IN_INITCODE
-
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/bootrom.h>
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/ebiu.h>
-#include <asm/mach-common/bits/pll.h>
-#include <asm/mach-common/bits/uart.h>
-
-#include "serial.h"
-
-__attribute__((always_inline))
-static inline void serial_init(void)
-{
-#ifdef __ADSPBF54x__
-# ifdef BFIN_BOOT_UART_USE_RTS
-#  define BFIN_UART_USE_RTS 1
-# else
-#  define BFIN_UART_USE_RTS 0
-# endif
-	if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
-		size_t i;
-
-		/* force RTS rather than relying on auto RTS */
-		bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL);
-
-		/* Wait for the line to clear up.  We cannot rely on UART
-		 * registers as none of them reflect the status of the RSR.
-		 * Instead, we'll sleep for ~10 bit times at 9600 baud.
-		 * We can precalc things here by assuming boot values for
-		 * PLL rather than loading registers and calculating.
-		 *	baud    = SCLK / (16 ^ (1 - EDBO) * Divisor)
-		 *	EDB0    = 0
-		 *	Divisor = (SCLK / baud) / 16
-		 *	SCLK    = baud * 16 * Divisor
-		 *	SCLK    = (0x14 * CONFIG_CLKIN_HZ) / 5
-		 *	CCLK    = (16 * Divisor * 5) * (9600 / 10)
-		 * In reality, this will probably be just about 1 second delay,
-		 * so assuming 9600 baud is OK (both as a very low and too high
-		 * speed as this will buffer things enough).
-		 */
-#define _NUMBITS (10)                                   /* how many bits to delay */
-#define _LOWBAUD (9600)                                 /* low baud rate */
-#define _SCLK    ((0x14 * CONFIG_CLKIN_HZ) / 5)         /* SCLK based on PLL */
-#define _DIVISOR ((_SCLK / _LOWBAUD) / 16)              /* UART DLL/DLH */
-#define _NUMINS  (3)                                    /* how many instructions in loop */
-#define _CCLK    (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS)
-		i = _CCLK;
-		while (i--)
-			asm volatile("" : : : "memory");
-	}
-#endif
-
-	if (BFIN_DEBUG_EARLY_SERIAL) {
-		int ucen = bfin_read16(&pUART->gctl) & UCEN;
-		serial_early_init();
-
-		/* If the UART is off, that means we need to program
-		 * the baud rate ourselves initially.
-		 */
-		if (ucen != UCEN)
-			serial_early_set_baud(CONFIG_BAUDRATE);
-	}
-}
-
-__attribute__((always_inline))
-static inline void serial_deinit(void)
-{
-#ifdef __ADSPBF54x__
-	if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
-		/* clear forced RTS rather than relying on auto RTS */
-		bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL);
-	}
-#endif
-}
-
-__attribute__((always_inline))
-static inline void serial_putc(char c)
-{
-	if (!BFIN_DEBUG_EARLY_SERIAL)
-		return;
-
-	if (c == '\n')
-		serial_putc('\r');
-
-	bfin_write16(&pUART->thr, c);
-
-	while (!(bfin_read16(&pUART->lsr) & TEMT))
-		continue;
-}
-
-
-/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
- * us a freq of 16MHz for SPI which should generally be
- * slow enough for the slow reads the bootrom uses.
- */
-#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \
-    ((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \
-     (defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1))
-# define BOOTROM_SUPPORTS_SPI_FAST_READ 1
-#else
-# define BOOTROM_SUPPORTS_SPI_FAST_READ 0
-#endif
-#ifndef CONFIG_SPI_BAUD_INITBLOCK
-# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4)
-#endif
-#ifdef SPI0_BAUD
-# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD
-#endif
-
-/* PLL_DIV defines */
-#ifndef CONFIG_PLL_DIV_VAL
-# if (CONFIG_CCLK_DIV == 1)
-#  define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-# elif (CONFIG_CCLK_DIV == 2)
-#  define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-# elif (CONFIG_CCLK_DIV == 4)
-#  define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-# elif (CONFIG_CCLK_DIV == 8)
-#  define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-# else
-#  define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-# endif
-# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV)
-#endif
-
-#ifndef CONFIG_PLL_LOCKCNT_VAL
-# define CONFIG_PLL_LOCKCNT_VAL 0x0300
-#endif
-
-#ifndef CONFIG_PLL_CTL_VAL
-# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF)
-#endif
-
-#ifndef CONFIG_EBIU_RSTCTL_VAL
-# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */
-#endif
-#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0)
-# error invalid EBIU_RSTCTL value: must not set reserved bits
-#endif
-
-#ifndef CONFIG_EBIU_MBSCTL_VAL
-# define CONFIG_EBIU_MBSCTL_VAL 0
-#endif
-
-#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0)
-# error invalid EBIU_DDRQUE value: must not set reserved bits
-#endif
-
-/* Make sure our voltage value is sane so we don't blow up! */
-#ifndef CONFIG_VR_CTL_VAL
-# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV)
-# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__)
-#  define CCLK_VLEV_120	400000000
-#  define CCLK_VLEV_125	533000000
-# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
-#  define CCLK_VLEV_120	401000000
-#  define CCLK_VLEV_125	401000000
-# elif defined(__ADSPBF561__)
-#  define CCLK_VLEV_120	300000000
-#  define CCLK_VLEV_125	501000000
-# endif
-# if BFIN_CCLK < CCLK_VLEV_120
-#  define CONFIG_VR_CTL_VLEV VLEV_120
-# elif BFIN_CCLK < CCLK_VLEV_125
-#  define CONFIG_VR_CTL_VLEV VLEV_125
-# else
-#  define CONFIG_VR_CTL_VLEV VLEV_130
-# endif
-# if defined(__ADSPBF52x__)	/* TBD; use default */
-#  undef CONFIG_VR_CTL_VLEV
-#  define CONFIG_VR_CTL_VLEV VLEV_110
-# elif defined(__ADSPBF54x__)	/* TBD; use default */
-#  undef CONFIG_VR_CTL_VLEV
-#  define CONFIG_VR_CTL_VLEV VLEV_120
-# elif defined(__ADSPBF538__) || defined(__ADSPBF539__)	/* TBD; use default */
-#  undef CONFIG_VR_CTL_VLEV
-#  define CONFIG_VR_CTL_VLEV VLEV_125
-# endif
-
-# ifdef CONFIG_BFIN_MAC
-#  define CONFIG_VR_CTL_CLKBUF CLKBUFOE
-# else
-#  define CONFIG_VR_CTL_CLKBUF 0
-# endif
-
-# if defined(__ADSPBF52x__)
-#  define CONFIG_VR_CTL_FREQ FREQ_1000
-# else
-#  define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000)
-# endif
-
-# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
-#endif
-
-/* some parts do not have an on-chip voltage regulator */
-#if defined(__ADSPBF51x__)
-# define CONFIG_HAS_VR 0
-# undef CONFIG_VR_CTL_VAL
-# define CONFIG_VR_CTL_VAL 0
-#else
-# define CONFIG_HAS_VR 1
-#endif
-
-#if CONFIG_MEM_SIZE
-#ifndef EBIU_RSTCTL
-/* Blackfin with SDRAM */
-#ifndef CONFIG_EBIU_SDBCTL_VAL
-# if CONFIG_MEM_SIZE == 16
-#  define CONFIG_EBSZ_VAL EBSZ_16
-# elif CONFIG_MEM_SIZE == 32
-#  define CONFIG_EBSZ_VAL EBSZ_32
-# elif CONFIG_MEM_SIZE == 64
-#  define CONFIG_EBSZ_VAL EBSZ_64
-# elif CONFIG_MEM_SIZE == 128
-#  define CONFIG_EBSZ_VAL EBSZ_128
-# elif CONFIG_MEM_SIZE == 256
-#  define CONFIG_EBSZ_VAL EBSZ_256
-# elif CONFIG_MEM_SIZE == 512
-#  define CONFIG_EBSZ_VAL EBSZ_512
-# else
-#  error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE
-# endif
-# if CONFIG_MEM_ADD_WDTH == 8
-#  define CONFIG_EBCAW_VAL EBCAW_8
-# elif CONFIG_MEM_ADD_WDTH == 9
-#  define CONFIG_EBCAW_VAL EBCAW_9
-# elif CONFIG_MEM_ADD_WDTH == 10
-#  define CONFIG_EBCAW_VAL EBCAW_10
-# elif CONFIG_MEM_ADD_WDTH == 11
-#  define CONFIG_EBCAW_VAL EBCAW_11
-# else
-#  error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH
-# endif
-# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE)
-#endif
-#endif
-#endif
-
-/* Conflicting Column Address Widths Causes SDRAM Errors:
- * EB2CAW and EB3CAW must be the same
- */
-#if ANOMALY_05000362
-# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
-#  error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
-# endif
-#endif
-
-__attribute__((always_inline)) static inline void
-program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
-{
-	serial_putc('a');
-
-	/* Save the clock pieces that are used in baud rate calculation */
-	if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
-		serial_putc('b');
-		*sdivB = bfin_read_PLL_DIV() & 0xf;
-		*vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f;
-		*divB = serial_early_get_div();
-		serial_putc('c');
-	}
-
-	serial_putc('d');
-
-#ifdef CONFIG_HW_WATCHDOG
-# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
-#  define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000
-# endif
-	/* Program the watchdog with an initial timeout of ~20 seconds.
-	 * Hopefully that should be long enough to load the u-boot LDR
-	 * (from wherever) and then the common u-boot code can take over.
-	 * In bypass mode, the start.S would have already set a much lower
-	 * timeout, so don't clobber that.
-	 */
-	if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
-		serial_putc('e');
-		bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
-		bfin_write_WDOG_CTL(0);
-		serial_putc('f');
-	}
-#endif
-
-	serial_putc('g');
-
-	/* Blackfin bootroms use the SPI slow read opcode instead of the SPI
-	 * fast read, so we need to slow down the SPI clock a lot more during
-	 * boot.  Once we switch over to u-boot's SPI flash driver, we'll
-	 * increase the speed appropriately.
-	 */
-	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
-		serial_putc('h');
-		if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4)
-			bs->dFlags |= BFLAG_FASTREAD;
-		bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
-		serial_putc('i');
-	}
-
-	serial_putc('j');
-}
-
-__attribute__((always_inline)) static inline bool
-maybe_self_refresh(ADI_BOOT_DATA *bs)
-{
-	serial_putc('a');
-
-	if (!CONFIG_MEM_SIZE)
-		return false;
-
-	/* If external memory is enabled, put it into self refresh first. */
-#ifdef EBIU_RSTCTL
-	if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) {
-		serial_putc('b');
-		bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ);
-		return true;
-	}
-#else
-	if (bfin_read_EBIU_SDBCTL() & EBE) {
-		serial_putc('b');
-		bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
-		return true;
-	}
-#endif
-
-	serial_putc('c');
-
-	return false;
-}
-
-__attribute__((always_inline)) static inline u16
-program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
-{
-	u16 vr_ctl;
-
-	serial_putc('a');
-
-	vr_ctl = bfin_read_VR_CTL();
-
-	serial_putc('b');
-
-	/* If we're entering self refresh, make sure it has happened. */
-	if (put_into_srfs)
-#ifdef EBIU_RSTCTL
-		while (!(bfin_read_EBIU_RSTCTL() & SRACK))
-#else
-		while (!(bfin_read_EBIU_SDSTAT() & SDSRA))
-#endif
-			continue;
-
-	serial_putc('c');
-
-	/* With newer bootroms, we use the helper function to set up
-	 * the memory controller.  Older bootroms lacks such helpers
-	 * so we do it ourselves.
-	 */
-	if (!ANOMALY_05000386) {
-		serial_putc('d');
-
-		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
-		ADI_SYSCTRL_VALUES memory_settings;
-		uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
-		if (CONFIG_HAS_VR) {
-			actions |= SYSCTRL_VRCTL;
-			if (CONFIG_VR_CTL_VAL & FREQ_MASK)
-				actions |= SYSCTRL_INTVOLTAGE;
-			else
-				actions |= SYSCTRL_EXTVOLTAGE;
-			memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
-		} else
-			actions |= SYSCTRL_EXTVOLTAGE;
-		memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
-		memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
-		memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
-#if ANOMALY_05000432
-		bfin_write_SIC_IWR1(0);
-#endif
-		serial_putc('e');
-		bfrom_SysControl(actions, &memory_settings, NULL);
-		serial_putc('f');
-#if ANOMALY_05000432
-		bfin_write_SIC_IWR1(-1);
-#endif
-#if ANOMALY_05000171
-		bfin_write_SICA_IWR0(-1);
-		bfin_write_SICA_IWR1(-1);
-#endif
-		serial_putc('g');
-	} else {
-		serial_putc('h');
-
-		/* Disable all peripheral wakeups except for the PLL event. */
-#ifdef SIC_IWR0
-		bfin_write_SIC_IWR0(1);
-		bfin_write_SIC_IWR1(0);
-# ifdef SIC_IWR2
-		bfin_write_SIC_IWR2(0);
-# endif
-#elif defined(SICA_IWR0)
-		bfin_write_SICA_IWR0(1);
-		bfin_write_SICA_IWR1(0);
-#else
-		bfin_write_SIC_IWR(1);
-#endif
-
-		serial_putc('i');
-
-		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
-		bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
-
-		serial_putc('j');
-
-		/* Only reprogram when needed to avoid triggering unnecessary
-		 * PLL relock sequences.
-		 */
-		if (vr_ctl != CONFIG_VR_CTL_VAL) {
-			serial_putc('?');
-			bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
-			asm("idle;");
-			serial_putc('!');
-		}
-
-		serial_putc('k');
-
-		bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
-
-		serial_putc('l');
-
-		/* Only reprogram when needed to avoid triggering unnecessary
-		 * PLL relock sequences.
-		 */
-		if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
-			serial_putc('?');
-			bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
-			asm("idle;");
-			serial_putc('!');
-		}
-
-		serial_putc('m');
-
-		/* Restore all peripheral wakeups. */
-#ifdef SIC_IWR0
-		bfin_write_SIC_IWR0(-1);
-		bfin_write_SIC_IWR1(-1);
-# ifdef SIC_IWR2
-		bfin_write_SIC_IWR2(-1);
-# endif
-#elif defined(SICA_IWR0)
-		bfin_write_SICA_IWR0(-1);
-		bfin_write_SICA_IWR1(-1);
-#else
-		bfin_write_SIC_IWR(-1);
-#endif
-
-		serial_putc('n');
-	}
-
-	serial_putc('o');
-
-	return vr_ctl;
-}
-
-__attribute__((always_inline)) static inline void
-update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB)
-{
-	serial_putc('a');
-
-	/* Since we've changed the SCLK above, we may need to update
-	 * the UART divisors (UART baud rates are based on SCLK).
-	 * Do the division by hand as there are no native instructions
-	 * for dividing which means we'd generate a libgcc reference.
-	 */
-	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
-		serial_putc('b');
-		unsigned int sdivR, vcoR;
-		sdivR = bfin_read_PLL_DIV() & 0xf;
-		vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
-		int dividend = sdivB * divB * vcoR;
-		int divisor = vcoB * sdivR;
-		unsigned int quotient;
-		for (quotient = 0; dividend > 0; ++quotient)
-			dividend -= divisor;
-		serial_early_put_div(quotient - ANOMALY_05000230);
-		serial_putc('c');
-	}
-
-	serial_putc('d');
-}
-
-__attribute__((always_inline)) static inline void
-program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
-{
-	serial_putc('a');
-
-	if (!CONFIG_MEM_SIZE)
-		return;
-
-	serial_putc('b');
-
-	/* Program the external memory controller before we come out of
-	 * self-refresh.  This only works with our SDRAM controller.
-	 */
-#ifndef EBIU_RSTCTL
-# ifdef CONFIG_EBIU_SDRRC_VAL
-	bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
-# endif
-# ifdef CONFIG_EBIU_SDBCTL_VAL
-	bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_SDGCTL_VAL
-	bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
-# endif
-#endif
-
-	serial_putc('c');
-
-	/* Now that we've reprogrammed, take things out of self refresh. */
-	if (put_into_srfs)
-#ifdef EBIU_RSTCTL
-		bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
-#else
-		bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS));
-#endif
-
-	serial_putc('d');
-
-	/* Our DDR controller sucks and cannot be programmed while in
-	 * self-refresh.  So we have to pull it out before programming.
-	 */
-#ifdef EBIU_RSTCTL
-# ifdef CONFIG_EBIU_RSTCTL_VAL
-	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL0_VAL
-	bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL1_VAL
-	bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL2_VAL
-	bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL3_VAL
-	/* default is disable, so don't need to force this */
-	bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRQUE_VAL
-	bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL);
-# endif
-#endif
-
-	serial_putc('e');
-}
-
-__attribute__((always_inline)) static inline void
-check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs)
-{
-	serial_putc('a');
-
-	if (!CONFIG_MEM_SIZE)
-		return;
-
-	serial_putc('b');
-
-	/* Are we coming out of hibernate (suspend to memory) ?
-	 * The memory layout is:
-	 * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF)
-	 * 0x4: return address
-	 * 0x8: stack pointer
-	 *
-	 * SCKELOW is unreliable on older parts (anomaly 307)
-	 */
-	if (ANOMALY_05000307 || vr_ctl & 0x8000) {
-		uint32_t *hibernate_magic = 0;
-		__builtin_bfin_ssync(); /* make sure memory controller is done */
-		if (hibernate_magic[0] == 0xDEADBEEF) {
-			serial_putc('c');
-			bfin_write_EVT15(hibernate_magic[1]);
-			bfin_write_IMASK(EVT_IVG15);
-			__asm__ __volatile__ (
-				/* load reti early to avoid anomaly 281 */
-				"reti = %0;"
-				/* clear hibernate magic */
-				"[%0] = %1;"
-				/* load stack pointer */
-				"SP = [%0 + 8];"
-				/* lower ourselves from reset ivg to ivg15 */
-				"raise 15;"
-				"rti;"
-				:
-				: "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */)
-			);
-		}
-		serial_putc('d');
-	}
-
-	serial_putc('e');
-}
-
-__attribute__((always_inline)) static inline void
-program_async_controller(ADI_BOOT_DATA *bs)
-{
-	serial_putc('a');
-
-	/* Program the async banks controller. */
-	bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
-	bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
-	bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
-
-	serial_putc('b');
-
-	/* Not all parts have these additional MMRs. */
-#ifdef EBIU_MODE
-# ifdef CONFIG_EBIU_MBSCTL_VAL
-	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_MODE_VAL
-	bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
-# endif
-# ifdef CONFIG_EBIU_FCTL_VAL
-	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
-# endif
-#endif
-
-	serial_putc('c');
-}
-
-BOOTROM_CALLED_FUNC_ATTR
-void initcode(ADI_BOOT_DATA *bs)
-{
-	ADI_BOOT_DATA bootstruct_scratch;
-
-	serial_init();
-
-	serial_putc('A');
-
-	/* If the bootstruct is NULL, then it's because we're loading
-	 * dynamically and not via LDR (bootrom).  So set the struct to
-	 * some scratch space.
-	 */
-	if (!bs)
-		bs = &bootstruct_scratch;
-
-	serial_putc('B');
-	bool put_into_srfs = maybe_self_refresh(bs);
-
-	serial_putc('C');
-	uint sdivB, divB, vcoB;
-	program_early_devices(bs, &sdivB, &divB, &vcoB);
-
-	serial_putc('D');
-	u16 vr_ctl = program_clocks(bs, put_into_srfs);
-
-	serial_putc('E');
-	update_serial_clocks(bs, sdivB, divB, vcoB);
-
-	serial_putc('F');
-	program_memory_controller(bs, put_into_srfs);
-
-	serial_putc('G');
-	check_hibernation(bs, vr_ctl, put_into_srfs);
-
-	serial_putc('H');
-	program_async_controller(bs);
-
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-	serial_putc('I');
-	/* tell the bootrom where our entry point is */
-	if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
-		bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
-#endif
-
-	serial_putc('>');
-	serial_putc('\n');
-
-	serial_deinit();
-}
diff --git a/cpu/blackfin/interrupt.S b/cpu/blackfin/interrupt.S
deleted file mode 100644
index 69bba3f..0000000
--- a/cpu/blackfin/interrupt.S
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * interrupt.S - trampoline default exceptions/interrupts to C handlers
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/entry.h>
-#include <asm/ptrace.h>
-#include <asm/deferred.h>
-#include <asm/mach-common/bits/core.h>
-
-.text
-
-/* default entry point for exceptions */
-ENTRY(_trap)
-	CONFIG_BFIN_SCRATCH_REG = sp;
-	sp.l = LO(L1_SRAM_SCRATCH_END - 20);
-	sp.h = HI(L1_SRAM_SCRATCH_END - 20);
-	SAVE_ALL_SYS
-
-	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
-	r1 = 3;		/* EVT3 space */
-	sp += -12;
-	call _trap_c;
-	sp += 12;
-
-#ifdef CONFIG_EXCEPTION_DEFER
-	CC = R0 == 0;
-	IF CC JUMP .Lexit_trap;
-
-	/* To avoid double faults, lower our priority to IRQ5 */
-	p4.l = lo(COREMMR_BASE);
-	p4.h = hi(COREMMR_BASE);
-
-	r7.h = _exception_to_level5;
-	r7.l = _exception_to_level5;
-	[p4 + (EVT5 - COREMMR_BASE)] = r7;
-
-	/*
-	 * Save these registers, as they are only valid in exception context
-	 *  (where we are now - as soon as we defer to IRQ5, they can change)
-	 */
-	p5.l = _deferred_regs;
-	p5.h = _deferred_regs;
-	r6 = [p4 + (DCPLB_FAULT_ADDR - COREMMR_BASE)];
-	[p5 + (deferred_regs_DCPLB_FAULT_ADDR * 4)] = r6;
-
-	r6 = [p4 + (ICPLB_FAULT_ADDR - COREMMR_BASE)];
-	[p5 + (deferred_regs_ICPLB_FAULT_ADDR * 4)] = r6;
-
-	/* Save the state of single stepping */
-	r6 = SYSCFG;
-	[p5 + (deferred_regs_SYSCFG * 4)] = r6;
-	/* Clear it while we handle the exception in IRQ5 mode
-	 * RESTORE_ALL_SYS will load it, so all we need to do is store it
-	 * in the right place
-	 */
-	BITCLR(r6, SYSCFG_SSSTEP_P);
-	[SP + PT_SYSCFG] = r6;
-
-	/* Since we are going to clobber RETX, we need to save it */
-	r6 = retx;
-	[p5 + (deferred_regs_retx * 4)] = r6;
-
-	/* Save the current IMASK, since we change in order to jump to level 5 */
-	cli r6;
-	[p5 + (deferred_regs_IMASK * 4)] = r6;
-
-	/* Disable all interrupts, but make sure level 5 is enabled so
-	 * we can switch to that level.
-	 */
-	r6 = 0x3f;
-	sti r6;
-
-	/* Clobber RETX so we don't end up back at a faulting instruction */
-	[sp + PT_RETX] = r7;
-
-	/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
-	 * clear it (re-enabling interrupts again) by the special sequence of pushing
-	 * RETI onto the stack.  This way we can lower ourselves to IVG5 even if the
-	 * exception was taken after the interrupt handler was called but before it
-	 * got a chance to enable global interrupts itself.
-	 */
-	[--sp] = reti;
-	sp += 4;
-
-	RAISE 5;
-.Lexit_trap:
-#endif
-
-#if ANOMALY_05000257
-	R7  = LC0;
-	LC0 = R7;
-	R7  = LC1;
-	LC1 = R7;
-#endif
-
-	RESTORE_ALL_SYS
-	sp = CONFIG_BFIN_SCRATCH_REG;
-	rtx;
-ENDPROC(_trap)
-
-#ifdef CONFIG_EXCEPTION_DEFER
-/* Deferred (IRQ5) exceptions */
-ENTRY(_exception_to_level5)
-	SAVE_ALL_SYS
-
-	/* Now we have to fix things up */
-	p4.l = lo(EVT5);
-	p4.h = hi(EVT5);
-	r0.l = _evt_default;
-	r0.h = _evt_default;
-	[p4] = r0;
-	csync;
-
-	p4.l = _deferred_regs;
-	p4.h = _deferred_regs;
-	r0 = [p4 + (deferred_regs_retx * 4)];
-	[sp + PT_PC] = r0;
-
-	r0 = [p4 + (deferred_regs_SYSCFG * 4)];
-	[sp + PT_SYSCFG] = r0;
-
-	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
-	r1 = 5;	/* EVT5 space */
-	sp += -12;
-	call _trap_c;
-	sp += 12;
-
-	/* Restore IMASK */
-	r0 = [p4 + (deferred_regs_IMASK * 4)];
-	sti r0;
-
-	RESTORE_ALL_SYS
-
-	rti;
-ENDPROC(_exception_to_level5)
-#endif
-
-/* default entry point for interrupts */
-ENTRY(_evt_default)
-	SAVE_ALL_SYS
-	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
-	sp += -12;
-	call _bfin_panic;
-	sp += 12;
-	RESTORE_ALL_SYS
-	rti;
-ENDPROC(_evt_default)
diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c
deleted file mode 100644
index 54a67b4..0000000
--- a/cpu/blackfin/interrupts.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * U-boot - interrupts.c Interrupt related routines
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * This file is based on interrupts.c
- * Copyright 1996 Roman Zippel
- * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- * Copyright 2003 Metrowerks/Motorola
- * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
- *			BuyWays B.V. (www.buyways.nl)
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <watchdog.h>
-#include <asm/blackfin.h>
-#include "cpu.h"
-
-static ulong timestamp;
-static ulong last_time;
-static int int_flag;
-
-int irq_flags;			/* needed by asm-blackfin/system.h */
-
-/* Functions just to satisfy the linker */
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On Blackfin it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On Blackfin it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
-}
-
-void enable_interrupts(void)
-{
-	local_irq_restore(int_flag);
-}
-
-int disable_interrupts(void)
-{
-	local_irq_save(int_flag);
-	return 1;
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long delay, start, stop;
-	unsigned long cclk;
-	cclk = (CONFIG_CCLK_HZ);
-
-	while (usec > 1) {
-		WATCHDOG_RESET();
-
-		/*
-		 * how many clock ticks to delay?
-		 *  - request(in useconds) * clock_ticks(Hz) / useconds/second
-		 */
-		if (usec < 1000) {
-			delay = (usec * (cclk / 244)) >> 12;
-			usec = 0;
-		} else {
-			delay = (1000 * (cclk / 244)) >> 12;
-			usec -= 1000;
-		}
-
-		asm volatile (" %0 = CYCLES;" : "=r" (start));
-		do {
-			asm volatile (" %0 = CYCLES; " : "=r" (stop));
-		} while (stop - start < delay);
-	}
-
-	return;
-}
-
-#define MAX_TIM_LOAD	0xFFFFFFFF
-int timer_init(void)
-{
-	bfin_write_TCNTL(0x1);
-	CSYNC();
-	bfin_write_TSCALE(0x0);
-	bfin_write_TCOUNT(MAX_TIM_LOAD);
-	bfin_write_TPERIOD(MAX_TIM_LOAD);
-	bfin_write_TCNTL(0x7);
-	CSYNC();
-
-	timestamp = 0;
-	last_time = 0;
-
-	return 0;
-}
-
-/*
- * Any network command or flash
- * command is started get_timer shall
- * be called before TCOUNT gets reset,
- * to implement the accurate timeouts.
- *
- * How ever milliconds doesn't return
- * the number that has been elapsed from
- * the last reset.
- *
- * As get_timer is used in the u-boot
- * only for timeouts this should be
- * sufficient
- */
-ulong get_timer(ulong base)
-{
-	ulong milisec;
-
-	/* Number of clocks elapsed */
-	ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT());
-
-	/*
-	 * Find if the TCOUNT is reset
-	 * timestamp gives the number of times
-	 * TCOUNT got reset
-	 */
-	if (clocks < last_time)
-		timestamp++;
-	last_time = clocks;
-
-	/* Get the number of milliseconds */
-	milisec = clocks / (CONFIG_CCLK_HZ / 1000);
-
-	/*
-	 * Find the number of millisonds that
-	 * got elapsed before this TCOUNT cycle
-	 */
-	milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
-
-	return (milisec - base);
-}
-
-void reset_timer(void)
-{
-	timer_init();
-}
diff --git a/cpu/blackfin/jtag-console.c b/cpu/blackfin/jtag-console.c
deleted file mode 100644
index 1cd619f..0000000
--- a/cpu/blackfin/jtag-console.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * jtag-console.c - console driver over Blackfin JTAG
- *
- * Copyright (c) 2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <asm/blackfin.h>
-
-#ifndef CONFIG_JTAG_CONSOLE_TIMEOUT
-# define CONFIG_JTAG_CONSOLE_TIMEOUT 500
-#endif
-
-/* The Blackfin tends to be much much faster than the JTAG hardware. */
-static void jtag_write_emudat(uint32_t emudat)
-{
-	static bool overflowed = false;
-	ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT;
-	while (bfin_read_DBGSTAT() & 0x1) {
-		if (overflowed)
-			return;
-		if (timeout < get_timer(0))
-			overflowed = true;
-	}
-	overflowed = false;
-	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
-}
-/* Transmit a buffer.  The format is:
- * [32bit length][actual data]
- */
-static void jtag_send(const char *c, uint32_t len)
-{
-	uint32_t i;
-
-	if (len == 0)
-		return;
-
-	/* First send the length */
-	jtag_write_emudat(len);
-
-	/* Then send the data */
-	for (i = 0; i < len; i += 4)
-		jtag_write_emudat((c[i] << 0) | (c[i+1] << 8) | (c[i+2] << 16) | (c[i+3] << 24));
-}
-static void jtag_putc(const char c)
-{
-	jtag_send(&c, 1);
-}
-static void jtag_puts(const char *s)
-{
-	jtag_send(s, strlen(s));
-}
-
-static size_t inbound_len, leftovers_len;
-
-/* Lower layers want to know when jtag has data */
-static int jtag_tstc_dbg(void)
-{
-	return (bfin_read_DBGSTAT() & 0x2);
-}
-
-/* Higher layers want to know when any data is available */
-static int jtag_tstc(void)
-{
-	return jtag_tstc_dbg() || leftovers_len;
-}
-
-/* Receive a buffer.  The format is:
- * [32bit length][actual data]
- */
-static uint32_t leftovers;
-static int jtag_getc(void)
-{
-	int ret;
-	uint32_t emudat;
-
-	/* see if any data is left over */
-	if (leftovers_len) {
-		--leftovers_len;
-		ret = leftovers & 0xff;
-		leftovers >>= 8;
-		return ret;
-	}
-
-	/* wait for new data ! */
-	while (!jtag_tstc_dbg())
-		continue;
-	__asm__("%0 = emudat;" : "=d"(emudat));
-
-	if (inbound_len == 0) {
-		/* grab the length */
-		inbound_len = emudat;
-	} else {
-		/* store the bytes */
-		leftovers_len = min(4, inbound_len);
-		inbound_len -= leftovers_len;
-		leftovers = emudat;
-	}
-
-	return jtag_getc();
-}
-
-int drv_jtag_console_init(void)
-{
-	struct stdio_dev dev;
-	int ret;
-
-	memset(&dev, 0x00, sizeof(dev));
-	strcpy(dev.name, "jtag");
-	dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
-	dev.putc = jtag_putc;
-	dev.puts = jtag_puts;
-	dev.tstc = jtag_tstc;
-	dev.getc = jtag_getc;
-
-	ret = stdio_register(&dev);
-	return (ret == 0 ? 1 : ret);
-}
-
-#ifdef CONFIG_UART_CONSOLE_IS_JTAG
-/* Since the JTAG is always available (at power on), allow it to fake a UART */
-void serial_set_baud(uint32_t baud) {}
-void serial_setbrg(void)            {}
-int serial_init(void)               { return 0; }
-void serial_putc(const char c)      __attribute__((alias("jtag_putc")));
-void serial_puts(const char *s)     __attribute__((alias("jtag_puts")));
-int serial_tstc(void)               __attribute__((alias("jtag_tstc")));
-int serial_getc(void)               __attribute__((alias("jtag_getc")));
-#endif
diff --git a/cpu/blackfin/os_log.c b/cpu/blackfin/os_log.c
deleted file mode 100644
index e1c8e29..0000000
--- a/cpu/blackfin/os_log.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * functions for handling OS log buffer
- *
- * Copyright (c) 2009 Analog Devices Inc.
- *
- * Licensed under the 2-clause BSD.
- */
-
-#include <common.h>
-
-#define OS_LOG_MAGIC       0xDEADBEEF
-#define OS_LOG_MAGIC_ADDR  ((unsigned long *)0x4f0)
-#define OS_LOG_PTR_ADDR    ((char **)0x4f4)
-
-bool bfin_os_log_check(void)
-{
-	if (*OS_LOG_MAGIC_ADDR != OS_LOG_MAGIC)
-		return false;
-	*OS_LOG_MAGIC_ADDR = 0;
-	return true;
-}
-
-void bfin_os_log_dump(void)
-{
-	char *log = *OS_LOG_PTR_ADDR;
-	while (*log) {
-		puts(log);
-		log += strlen(log) + 1;
-	}
-}
diff --git a/cpu/blackfin/reset.c b/cpu/blackfin/reset.c
deleted file mode 100644
index e3be740..0000000
--- a/cpu/blackfin/reset.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * reset.c - logic for resetting the cpu
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include "cpu.h"
-
-/* A system soft reset makes external memory unusable so force
- * this function into L1.  We use the compiler ssync here rather
- * than SSYNC() because it's safe (no interrupts and such) and
- * we save some L1.  We do not need to force sanity in the SYSCR
- * register as the BMODE selection bit is cleared by the soft
- * reset while the Core B bit (on dual core parts) is cleared by
- * the core reset.
- */
-__attribute__ ((__l1_text__, __noreturn__))
-static void bfin_reset(void)
-{
-	/* Wait for completion of "system" events such as cache line
-	 * line fills so that we avoid infinite stalls later on as
-	 * much as possible.  This code is in L1, so it won't trigger
-	 * any such event after this point in time.
-	 */
-	__builtin_bfin_ssync();
-
-	/* The bootrom checks to see how it was reset and will
-	 * automatically perform a software reset for us when
-	 * it starts executing after the core reset.
-	 */
-	if (ANOMALY_05000353 || ANOMALY_05000386) {
-		/* Initiate System software reset. */
-		bfin_write_SWRST(0x7);
-
-		/* Due to the way reset is handled in the hardware, we need
-		 * to delay for 10 SCLKS.  The only reliable way to do this is
-		 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
-		 * we'll assume worse case which is a 1:15 ratio.
-		 */
-		asm(
-			"LSETUP (1f, 1f) LC0 = %0\n"
-			"1: nop;"
-			:
-			: "a" (15 * 10)
-			: "LC0", "LB0", "LT0"
-		);
-
-		/* Clear System software reset */
-		bfin_write_SWRST(0);
-
-		/* The BF526 ROM will crash during reset */
-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-		bfin_read_SWRST();
-#endif
-
-		/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
-		 * though as the System state is all reset now.
-		 */
-		asm(
-			"LSETUP (1f, 1f) LC1 = %0\n"
-			"1: nop;"
-			:
-			: "a" (15 * 1)
-			: "LC1", "LB1", "LT1"
-		);
-	}
-
-	while (1)
-		/* Issue core reset */
-		asm("raise 1");
-}
-
-/* We need to trampoline ourselves up into L1 since our linker
- * does not have relaxtion support and will only generate a
- * PC relative call with a 25 bit immediate.  This is not enough
- * to get us from the top of SDRAM into L1.
- */
-__attribute__ ((__noreturn__))
-static inline void bfin_reset_trampoline(void)
-{
-	if (board_reset)
-		board_reset();
-	while (1)
-		asm("jump (%0);" : : "a" (bfin_reset));
-}
-
-__attribute__ ((__noreturn__))
-void bfin_reset_or_hang(void)
-{
-#ifdef CONFIG_PANIC_HANG
-	hang();
-#else
-	bfin_reset_trampoline();
-#endif
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	bfin_reset_trampoline();
-	return 0;
-}
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
deleted file mode 100644
index 901cb97..0000000
--- a/cpu/blackfin/serial.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * U-boot - serial.c Blackfin Serial Driver
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
- *			BuyWays B.V. (www.buyways.nl)
- *
- * Based heavily on:
- * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
- * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
- * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
- * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
- *
- * Based on code from 68328 version serial driver imlpementation which was:
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-/* Anomaly notes:
- *  05000086 - we don't support autobaud
- *  05000099 - we only use DR bit, so losing others is not a problem
- *  05000100 - we don't use the UART_IIR register
- *  05000215 - we poll the uart (no dma/interrupts)
- *  05000225 - no workaround possible, but this shouldnt cause errors ...
- *  05000230 - we tweak the baud rate calculation slightly
- *  05000231 - we always use 1 stop bit
- *  05000309 - we always enable the uart before we modify it in anyway
- *  05000350 - we always enable the uart regardless of boot mode
- *  05000363 - we don't support break signals, so don't generate one
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/uart.h>
-
-#ifdef CONFIG_UART_CONSOLE
-
-#include "serial.h"
-
-#ifdef CONFIG_DEBUG_SERIAL
-uint16_t cached_lsr[256];
-uint16_t cached_rbr[256];
-size_t cache_count;
-
-/* The LSR is read-to-clear on some parts, so we have to make sure status
- * bits aren't inadvertently lost when doing various tests.  This also
- * works around anomaly 05000099 at the same time by keeping a cumulative
- * tally of all the status bits.
- */
-static uint16_t uart_lsr_save;
-static uint16_t uart_lsr_read(void)
-{
-	uint16_t lsr = bfin_read16(&pUART->lsr);
-	uart_lsr_save |= (lsr & (OE|PE|FE|BI));
-	return lsr | uart_lsr_save;
-}
-/* Just do the clear for everyone since it can't hurt. */
-static void uart_lsr_clear(void)
-{
-	uart_lsr_save = 0;
-	bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
-}
-#else
-/* When debugging is disabled, we only care about the DR bit, so if other
- * bits get set/cleared, we don't really care since we don't read them
- * anyways (and thus anomaly 05000099 is irrelevant).
- */
-static uint16_t uart_lsr_read(void)
-{
-	return bfin_read16(&pUART->lsr);
-}
-static void uart_lsr_clear(void)
-{
-	bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
-}
-#endif
-
-/* Symbol for our assembly to call. */
-void serial_set_baud(uint32_t baud)
-{
-	serial_early_set_baud(baud);
-}
-
-/* Symbol for common u-boot code to call.
- * Setup the baudrate (brg: baudrate generator).
- */
-void serial_setbrg(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	serial_set_baud(gd->baudrate);
-}
-
-/* Symbol for our assembly to call. */
-void serial_initialize(void)
-{
-	serial_early_init();
-}
-
-/* Symbol for common u-boot code to call. */
-int serial_init(void)
-{
-	serial_initialize();
-	serial_setbrg();
-	uart_lsr_clear();
-#ifdef CONFIG_DEBUG_SERIAL
-	cache_count = 0;
-	memset(cached_lsr, 0x00, sizeof(cached_lsr));
-	memset(cached_rbr, 0x00, sizeof(cached_rbr));
-#endif
-	return 0;
-}
-
-void serial_putc(const char c)
-{
-	/* send a \r for compatibility */
-	if (c == '\n')
-		serial_putc('\r');
-
-	WATCHDOG_RESET();
-
-	/* wait for the hardware fifo to clear up */
-	while (!(uart_lsr_read() & THRE))
-		continue;
-
-	/* queue the character for transmission */
-	bfin_write16(&pUART->thr, c);
-	SSYNC();
-
-	WATCHDOG_RESET();
-}
-
-int serial_tstc(void)
-{
-	WATCHDOG_RESET();
-	return (uart_lsr_read() & DR) ? 1 : 0;
-}
-
-int serial_getc(void)
-{
-	uint16_t uart_rbr_val;
-
-	/* wait for data ! */
-	while (!serial_tstc())
-		continue;
-
-	/* grab the new byte */
-	uart_rbr_val = bfin_read16(&pUART->rbr);
-
-#ifdef CONFIG_DEBUG_SERIAL
-	/* grab & clear the LSR */
-	uint16_t uart_lsr_val = uart_lsr_read();
-
-	cached_lsr[cache_count] = uart_lsr_val;
-	cached_rbr[cache_count] = uart_rbr_val;
-	cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
-
-	if (uart_lsr_val & (OE|PE|FE|BI)) {
-		uint16_t dll, dlh;
-		printf("\n[SERIAL ERROR]\n");
-		ACCESS_LATCH();
-		dll = bfin_read16(&pUART->dll);
-		dlh = bfin_read16(&pUART->dlh);
-		ACCESS_PORT_IER();
-		printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
-		do {
-			--cache_count;
-			printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count,
-				cached_rbr[cache_count], cached_lsr[cache_count]);
-		} while (cache_count > 0);
-		return -1;
-	}
-#endif
-	uart_lsr_clear();
-
-	return uart_rbr_val;
-}
-
-void serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
-#endif
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
deleted file mode 100644
index 5f9be86..0000000
--- a/cpu/blackfin/serial.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * serial.h - common serial defines for early debug and serial driver.
- *            any functions defined here must be always_inline since
- *            initcode cannot have function calls.
- *
- * Copyright (c) 2004-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_CPU_SERIAL_H__
-#define __BFIN_CPU_SERIAL_H__
-
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/uart.h>
-
-#ifndef CONFIG_UART_CONSOLE
-# define CONFIG_UART_CONSOLE 0
-#endif
-
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-# define BFIN_DEBUG_EARLY_SERIAL 1
-#else
-# define BFIN_DEBUG_EARLY_SERIAL 0
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define LOB(x) ((x) & 0xFF)
-#define HIB(x) (((x) >> 8) & 0xFF)
-
-/*
- * All Blackfin system MMRs are padded to 32bits even if the register
- * itself is only 16bits.  So use a helper macro to streamline this.
- */
-#define __BFP(m) u16 m; u16 __pad_##m
-struct bfin_mmr_serial {
-#ifdef __ADSPBF54x__
-	__BFP(dll);
-	__BFP(dlh);
-	__BFP(gctl);
-	__BFP(lcr);
-	__BFP(mcr);
-	__BFP(lsr);
-	__BFP(msr);
-	__BFP(scr);
-	__BFP(ier_set);
-	__BFP(ier_clear);
-	__BFP(thr);
-	__BFP(rbr);
-#else
-	union {
-		u16 dll;
-		u16 thr;
-		const u16 rbr;
-	};
-	const u16 __spad0;
-	union {
-		u16 dlh;
-		u16 ier;
-	};
-	const u16 __spad1;
-	const __BFP(iir);
-	__BFP(lcr);
-	__BFP(mcr);
-	__BFP(lsr);
-	__BFP(msr);
-	__BFP(scr);
-	const u32 __spad2;
-	__BFP(gctl);
-#endif
-};
-#undef __BFP
-
-#ifndef UART_LSR
-# if (CONFIG_UART_CONSOLE == 3)
-#  define UART_BASE UART3_DLL
-# elif (CONFIG_UART_CONSOLE == 2)
-#  define UART_BASE UART2_DLL
-# elif (CONFIG_UART_CONSOLE == 1)
-#  define UART_BASE UART1_DLL
-# elif (CONFIG_UART_CONSOLE == 0)
-#  define UART_BASE UART0_DLL
-# endif
-#else
-# if CONFIG_UART_CONSOLE != 0
-#  error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
-# endif
-# define UART_BASE UART_DLL
-#endif
-#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE)
-
-#ifdef __ADSPBF54x__
-# define ACCESS_LATCH()
-# define ACCESS_PORT_IER()
-#else
-# define ACCESS_LATCH() \
-	bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB)
-# define ACCESS_PORT_IER() \
-	bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB)
-#endif
-
-__attribute__((always_inline))
-static inline void serial_do_portmux(void)
-{
-#if defined(__ADSPBF51x__)
-# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
-	bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \
-	bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
-	switch (CONFIG_UART_CONSOLE) {
-	case 0: DO_MUX(G, 5, 5, 9, 10);  break;	/* Port G; mux 5; PG9 and PG10 */
-	case 1: DO_MUX(F, 2, 3, 14, 15); break;	/* Port H; mux 2/3; PH14 and PH15 */
-	}
-	SSYNC();
-#elif defined(__ADSPBF52x__)
-# define DO_MUX(port, mux, tx, rx) \
-	bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \
-	bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
-	switch (CONFIG_UART_CONSOLE) {
-	case 0: DO_MUX(G, 2, 7, 8);   break;	/* Port G; mux 2; PG2 and PG8 */
-	case 1: DO_MUX(F, 5, 14, 15); break;	/* Port F; mux 5; PF14 and PF15 */
-	}
-	SSYNC();
-#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
-# define DO_MUX(func, tx, rx) \
-	bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \
-	bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx);
-	switch (CONFIG_UART_CONSOLE) {
-	case 0: DO_MUX(PFDE, 0, 1); break;
-	case 1: DO_MUX(PFTE, 2, 3); break;
-	}
-	SSYNC();
-#elif defined(__ADSPBF54x__)
-# define DO_MUX(port, tx, rx) \
-	bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \
-	bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
-	switch (CONFIG_UART_CONSOLE) {
-	case 0: DO_MUX(E, 7, 8); break;	/* Port E; PE7 and PE8 */
-	case 1: DO_MUX(H, 0, 1); break;	/* Port H; PH0 and PH1 */
-	case 2: DO_MUX(B, 4, 5); break;	/* Port B; PB4 and PB5 */
-	case 3: DO_MUX(B, 6, 7); break;	/* Port B; PB6 and PB7 */
-	}
-	SSYNC();
-#endif
-}
-
-__attribute__((always_inline))
-static inline void serial_early_init(void)
-{
-	/* handle portmux crap on different Blackfins */
-	serial_do_portmux();
-
-	/* always enable UART -- avoids anomalies 05000309 and 05000350 */
-	bfin_write16(&pUART->gctl, UCEN);
-
-	/* Set LCR to Word Lengh 8-bit word select */
-	bfin_write16(&pUART->lcr, WLS_8);
-
-	SSYNC();
-}
-
-__attribute__((always_inline))
-static inline void serial_early_put_div(uint16_t divisor)
-{
-	/* Set DLAB in LCR to Access DLL and DLH */
-	ACCESS_LATCH();
-	SSYNC();
-
-	/* Program the divisor to get the baud rate we want */
-	bfin_write16(&pUART->dll, LOB(divisor));
-	bfin_write16(&pUART->dlh, HIB(divisor));
-	SSYNC();
-
-	/* Clear DLAB in LCR to Access THR RBR IER */
-	ACCESS_PORT_IER();
-	SSYNC();
-}
-
-__attribute__((always_inline))
-static inline uint16_t serial_early_get_div(void)
-{
-	/* Set DLAB in LCR to Access DLL and DLH */
-	ACCESS_LATCH();
-	SSYNC();
-
-	uint8_t dll = bfin_read16(&pUART->dll);
-	uint8_t dlh = bfin_read16(&pUART->dlh);
-	uint16_t divisor = (dlh << 8) | dll;
-
-	/* Clear DLAB in LCR to Access THR RBR IER */
-	ACCESS_PORT_IER();
-	SSYNC();
-
-	return divisor;
-}
-
-/* We cannot use get_sclk() early on as it uses caches in external memory */
-#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
-# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
-#endif
-
-__attribute__((always_inline))
-static inline void serial_early_set_baud(uint32_t baud)
-{
-	/* Translate from baud into divisor in terms of SCLK.  The
-	 * weird multiplication is to make sure we over sample just
-	 * a little rather than under sample the incoming signals.
-	 */
-	serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
-}
-
-#ifndef BFIN_IN_INITCODE
-__attribute__((always_inline))
-static inline void serial_early_puts(const char *s)
-{
-	if (BFIN_DEBUG_EARLY_SERIAL) {
-		serial_puts("Early: ");
-		serial_puts(s);
-	}
-}
-#endif
-
-#else
-
-.macro serial_early_init
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	call _serial_initialize;
-#endif
-.endm
-
-.macro serial_early_set_baud
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	R0.L = LO(CONFIG_BAUDRATE);
-	R0.H = HI(CONFIG_BAUDRATE);
-	call _serial_set_baud;
-#endif
-.endm
-
-/* Since we embed the string right into our .text section, we need
- * to find its address.  We do this by getting our PC and adding 2
- * bytes (which is the length of the jump instruction).  Then we
- * pass this address to serial_puts().
- */
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-# define serial_early_puts(str) \
-	call _get_pc; \
-	jump 1f; \
-	.ascii "Early:"; \
-	.ascii __FILE__; \
-	.ascii ": "; \
-	.ascii str; \
-	.asciz "\n"; \
-	.align 4; \
-1: \
-	R0 += 2; \
-	call _serial_puts;
-#else
-# define serial_early_puts(str)
-#endif
-
-#endif
-
-#endif
diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S
deleted file mode 100644
index 7a3abba..0000000
--- a/cpu/blackfin/start.S
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * U-boot - start.S Startup file for Blackfin u-boot
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * This file is based on head.S
- * Copyright (c) 2003  Metrowerks/Motorola
- * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- *                     Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- * (c) 1995, Dionne & Associates
- * (c) 1995, DKG Display Tech.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/dma.h>
-#include <asm/mach-common/bits/pll.h>
-
-#include "serial.h"
-
-/* It may seem odd that we make calls to functions even though we haven't
- * relocated ourselves yet out of {flash,ram,wherever}.  This is OK because
- * the "call" instruction in the Blackfin architecture is actually PC
- * relative.  So we can call functions all we want and not worry about them
- * not being relocated yet.
- */
-
-.text
-ENTRY(_start)
-
-	/* Set our initial stack to L1 scratch space */
-	sp.l = LO(L1_SRAM_SCRATCH_END - 20);
-	sp.h = HI(L1_SRAM_SCRATCH_END - 20);
-
-#ifdef CONFIG_HW_WATCHDOG
-# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
-#  define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
-# endif
-	/* Program the watchdog with an initial timeout of ~5 seconds.
-	 * That should be long enough to bootstrap ourselves up and
-	 * then the common u-boot code can take over.
-	 */
-	P0.L = LO(WDOG_CNT);
-	P0.H = HI(WDOG_CNT);
-	R0.L = 0;
-	R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
-	[P0] = R0;
-	/* fire up the watchdog - R0.L above needs to be 0x0000 */
-	W[P0 + (WDOG_CTL - WDOG_CNT)] = R0;
-#endif
-
-	/* Turn on the serial for debugging the init process */
-	serial_early_init
-	serial_early_set_baud
-
-	serial_early_puts("Init Registers");
-
-	/* Disable self-nested interrupts and enable CYCLES for udelay() */
-	R0 = CCEN | 0x30;
-	SYSCFG = R0;
-
-	/* Zero out registers required by Blackfin ABI.
-	 * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
-	 */
-	r1 = 0 (x);
-	/* Disable circular buffers */
-	l0 = r1;
-	l1 = r1;
-	l2 = r1;
-	l3 = r1;
-	/* Disable hardware loops in case we were started by 'go' */
-	lc0 = r1;
-	lc1 = r1;
-
-	/* Save RETX so we can pass it while booting Linux */
-	r7 = RETX;
-
-#if CONFIG_MEM_SIZE
-	/* Figure out where we are currently executing so that we can decide
-	 * how to best reprogram and relocate things.  We'll pass below:
-	 *  R4: load address of _start
-	 *  R5: current (not load) address of _start
-	 */
-	serial_early_puts("Find ourselves");
-
-	call _get_pc;
-.Loffset:
-	r1.l = .Loffset;
-	r1.h = .Loffset;
-	r4.l = _start;
-	r4.h = _start;
-	r3 = r1 - r4;
-	r5 = r0 - r3;
-
-	/* Inform upper layers if we had to do the relocation ourselves.
-	 * This allows us to detect whether we were loaded by 'go 0x1000'
-	 * or by the bootrom from an LDR.  "R6" is "loaded_from_ldr".
-	 */
-	r6 = 1 (x);
-	cc = r4 == r5;
-	if cc jump .Lnorelocate;
-	r6 = 0 (x);
-
-	/* In bypass mode, we don't have an LDR with an init block
-	 * so we need to explicitly call it ourselves.  This will
-	 * reprogram our clocks, memory, and setup our async banks.
-	 */
-	serial_early_puts("Program Clocks");
-
-	/* if we're executing >=0x20000000, then we dont need to dma */
-	r3 = 0x0;
-	r3.h = 0x2000;
-	cc = r5 < r3 (iu);
-	if cc jump .Ldma_and_reprogram;
-#else
-	r6 = 1 (x);	/* fake loaded_from_ldr = 1 */
-#endif
-	r0 = 0 (x);	/* set bootstruct to NULL */
-	call _initcode;
-	jump .Lprogrammed;
-
-	/* we're sitting in external memory, so dma into L1 and reprogram */
-.Ldma_and_reprogram:
-	r0.l = LO(L1_INST_SRAM);
-	r0.h = HI(L1_INST_SRAM);
-	r1.l = __initcode_lma;
-	r1.h = __initcode_lma;
-	r2.l = __initcode_len;
-	r2.h = __initcode_len;
-	r1 = r1 - r4;	/* convert r1 from load address of initcode ... */
-	r1 = r1 + r5;	/* ... to current (not load) address of initcode */
-	p3 = r0;
-	call _dma_memcpy_nocache;
-	r0 = 0 (x);	/* set bootstruct to NULL */
-	call (p3);
-
-	/* Since we reprogrammed SCLK, we need to update the serial divisor */
-.Lprogrammed:
-	serial_early_set_baud
-
-#if CONFIG_MEM_SIZE
-	/* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
-	 * monitor location in the end of RAM.  We know that memcpy() only
-	 * uses registers, so it is safe to call here.  Note that this only
-	 * copies to external memory ... we do not start executing out of
-	 * it yet (see "lower to 15" below).
-	 */
-	serial_early_puts("Relocate");
-	r0 = r4;
-	r1 = r5;
-	r2.l = LO(CONFIG_SYS_MONITOR_LEN);
-	r2.h = HI(CONFIG_SYS_MONITOR_LEN);
-	call _memcpy_ASM;
-#endif
-
-	/* Initialize BSS section ... we know that memset() does not
-	 * use the BSS, so it is safe to call here.  The bootrom LDR
-	 * takes care of clearing things for us.
-	 */
-	serial_early_puts("Zero BSS");
-	r0.l = __bss_vma;
-	r0.h = __bss_vma;
-	r1 = 0 (x);
-	r2.l = __bss_len;
-	r2.h = __bss_len;
-	call _memset;
-
-.Lnorelocate:
-
-	/* Setup the actual stack in external memory */
-	sp.h = HI(CONFIG_STACKBASE);
-	sp.l = LO(CONFIG_STACKBASE);
-	fp = sp;
-
-	/* Now lower ourselves from the highest interrupt level to
-	 * the lowest.  We do this by masking all interrupts but 15,
-	 * setting the 15 handler to ".Lenable_nested", raising the 15
-	 * interrupt, and then returning from the highest interrupt
-	 * level to the dummy "jump" until the interrupt controller
-	 * services the pending 15 interrupt.  If executing out of
-	 * flash, these steps also changes the code flow from flash
-	 * to external memory.
-	 */
-	serial_early_puts("Lower to 15");
-	r0 = r7;
-	r1 = r6;
-	p0.l = LO(EVT15);
-	p0.h = HI(EVT15);
-	p1.l = .Lenable_nested;
-	p1.h = .Lenable_nested;
-	[p0] = p1;
-	r7 = EVT_IVG15 (z);
-	sti r7;
-	raise 15;
-	p4.l = .LWAIT_HERE;
-	p4.h = .LWAIT_HERE;
-	reti = p4;
-	rti;
-
-	/* Enable nested interrupts before continuing with cpu init */
-.Lenable_nested:
-	cli r7;
-	[--sp] = reti;
-	jump.l _cpu_init_f;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(_start)
-
-LENTRY(_get_pc)
-	r0 = rets;
-#if ANOMALY_05000371
-	NOP;
-	NOP;
-	NOP;
-#endif
-	rts;
-ENDPROC(_get_pc)
diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c
deleted file mode 100644
index caaea94..0000000
--- a/cpu/blackfin/traps.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * U-boot - traps.c Routines related to interrupts and exceptions
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * This file is based on
- * No original Copyright holder listed,
- * Probabily original (C) Roman Zippel (assigned DJD, 1999)
- *
- * Copyright 2003 Metrowerks - for Blackfin
- * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
- * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <kgdb.h>
-#include <linux/types.h>
-#include <asm/traps.h>
-#include <asm/cplb.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/mpu.h>
-#include <asm/mach-common/bits/trace.h>
-#include <asm/deferred.h>
-#include "cpu.h"
-
-#define trace_buffer_save(x) \
-	do { \
-		(x) = bfin_read_TBUFCTL(); \
-		bfin_write_TBUFCTL((x) & ~TBUFEN); \
-	} while (0)
-
-#define trace_buffer_restore(x) \
-	bfin_write_TBUFCTL((x))
-
-/* The purpose of this map is to provide a mapping of address<->cplb settings
- * rather than an exact map of what is actually addressable on the part.  This
- * map covers all current Blackfin parts.  If you try to access an address that
- * is in this map but not actually on the part, you won't get an exception and
- * reboot, you'll get an external hardware addressing error and reboot.  Since
- * only the ends matter (you did something wrong and the board reset), the means
- * are largely irrelevant.
- */
-struct memory_map {
-	uint32_t start, end;
-	uint32_t data_flags, inst_flags;
-};
-const struct memory_map const bfin_memory_map[] = {
-	{	/* external memory */
-		.start = 0x00000000,
-		.end   = 0x20000000,
-		.data_flags = SDRAM_DGENERIC,
-		.inst_flags = SDRAM_IGENERIC,
-	},
-	{	/* async banks */
-		.start = 0x20000000,
-		.end   = 0x30000000,
-		.data_flags = SDRAM_EBIU,
-		.inst_flags = SDRAM_INON_CHBL,
-	},
-	{	/* everything on chip */
-		.start = 0xE0000000,
-		.end   = 0xFFFFFFFF,
-		.data_flags = L1_DMEMORY,
-		.inst_flags = L1_IMEMORY,
-	}
-};
-
-#ifdef CONFIG_EXCEPTION_DEFER
-unsigned int deferred_regs[deferred_regs_last];
-#endif
-
-/*
- * Handle all exceptions while running in EVT3 or EVT5
- */
-int trap_c(struct pt_regs *regs, uint32_t level)
-{
-	uint32_t ret = 0;
-	uint32_t trapnr = (regs->seqstat & EXCAUSE);
-	bool data = false;
-
-	switch (trapnr) {
-	/* 0x26 - Data CPLB Miss */
-	case VEC_CPLB_M:
-
-		if (ANOMALY_05000261) {
-			static uint32_t last_cplb_fault_retx;
-			/*
-			 * Work around an anomaly: if we see a new DCPLB fault,
-			 * return without doing anything. Then,
-			 * if we get the same fault again, handle it.
-			 */
-			if (last_cplb_fault_retx != regs->retx) {
-				last_cplb_fault_retx = regs->retx;
-				return ret;
-			}
-		}
-
-		data = true;
-		/* fall through */
-
-	/* 0x27 - Instruction CPLB Miss */
-	case VEC_CPLB_I_M: {
-		volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA;
-		uint32_t new_cplb_addr = 0, new_cplb_data = 0;
-		static size_t last_evicted;
-		size_t i;
-		unsigned long tflags;
-
-#ifdef CONFIG_EXCEPTION_DEFER
-		/* This should never happen */
-		if (level == 5)
-			bfin_panic(regs);
-#endif
-
-		/*
-		 * Keep the trace buffer so that a miss here points people
-		 * to the right place (their code).  Crashes here rarely
-		 * happen.  If they do, only the Blackfin maintainer cares.
-		 */
-		trace_buffer_save(tflags);
-
-		new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1);
-
-		for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) {
-			/* if the exception is inside this range, lets use it */
-			if (new_cplb_addr >= bfin_memory_map[i].start &&
-			    new_cplb_addr < bfin_memory_map[i].end)
-				break;
-		}
-		if (i == ARRAY_SIZE(bfin_memory_map)) {
-			printf("%cCPLB exception outside of memory map at 0x%p\n",
-				(data ? 'D' : 'I'), (void *)new_cplb_addr);
-			bfin_panic(regs);
-		} else
-			debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end);
-		new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags);
-
-		if (data) {
-			CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0;
-			CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0;
-		} else {
-			CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0;
-			CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0;
-		}
-
-		/* find the next unlocked entry and evict it */
-		i = last_evicted & 0xF;
-		debug("last evicted = %i\n", i);
-		CPLB_DATA = CPLB_DATA_BASE + i;
-		while (*CPLB_DATA & CPLB_LOCK) {
-			debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA);
-			i = (i + 1) & 0xF;	/* wrap around */
-			CPLB_DATA = CPLB_DATA_BASE + i;
-		}
-		CPLB_ADDR = CPLB_ADDR_BASE + i;
-
-		debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA);
-		last_evicted = i + 1;
-
-		/* need to turn off cplbs whenever we muck with the cplb table */
-#if ENDCPLB != ENICPLB
-# error cplb enable bit violates my sanity
-#endif
-		uint32_t mem_control = (data ? DMEM_CONTROL : IMEM_CONTROL);
-		bfin_write32(mem_control, bfin_read32(mem_control) & ~ENDCPLB);
-		*CPLB_ADDR = new_cplb_addr;
-		*CPLB_DATA = new_cplb_data;
-		bfin_write32(mem_control, bfin_read32(mem_control) | ENDCPLB);
-		SSYNC();
-
-		/* dump current table for debugging purposes */
-		CPLB_ADDR = CPLB_ADDR_BASE;
-		CPLB_DATA = CPLB_DATA_BASE;
-		for (i = 0; i < 16; ++i)
-			debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++);
-
-		trace_buffer_restore(tflags);
-		break;
-	}
-#ifdef CONFIG_CMD_KGDB
-	/* Single step
-	 * if we are in IRQ5, just ignore, otherwise defer, and handle it in kgdb
-	 */
-	case VEC_STEP:
-		if (level == 3) {
-			/* If we just returned from an interrupt, the single step
-			 * event is for the RTI instruction.
-			 */
-			if (regs->retx == regs->pc)
-				break;
-			/* we just return if we are single stepping through IRQ5 */
-			if (regs->ipend & 0x20)
-				break;
-			/* Otherwise, turn single stepping off & fall through,
-			 * which defers to IRQ5
-			 */
-			regs->syscfg &= ~1;
-		}
-		/* fall through */
-#endif
-	default:
-#ifdef CONFIG_CMD_KGDB
-		if (level == 3) {
-			/* We need to handle this at EVT5, so try again */
-			ret = 1;
-			break;
-		}
-		if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-			return 0;
-#endif
-		bfin_panic(regs);
-	}
-	return ret;
-}
-
-#ifdef CONFIG_DEBUG_DUMP
-# define ENABLE_DUMP 1
-#else
-# define ENABLE_DUMP 0
-#endif
-
-#ifndef CONFIG_KALLSYMS
-const char *symbol_lookup(unsigned long addr, unsigned long *caddr)
-{
-	*caddr = addr;
-	return "N/A";
-}
-#endif
-
-static void decode_address(char *buf, unsigned long address)
-{
-	unsigned long sym_addr;
-	void *paddr = (void *)address;
-	const char *sym = symbol_lookup(address, &sym_addr);
-
-	if (sym) {
-		sprintf(buf, "<0x%p> { %s + 0x%lx }", paddr, sym, address - sym_addr);
-		return;
-	}
-
-	if (!address)
-		sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr);
-	else if (address >= CONFIG_SYS_MONITOR_BASE &&
-	         address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-		sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr);
-	else
-		sprintf(buf, "<0x%p> /* unknown address */", paddr);
-}
-
-static char *strhwerrcause(uint16_t hwerrcause)
-{
-	switch (hwerrcause) {
-		case 0x02: return "system mmr error";
-		case 0x03: return "external memory addressing error";
-		case 0x12: return "performance monitor overflow";
-		case 0x18: return "raise 5 instruction";
-		default:   return "undef";
-	}
-}
-
-static char *strexcause(uint16_t excause)
-{
-	switch (excause) {
-		case 0x00 ... 0xf: return "custom exception";
-		case 0x10: return "single step";
-		case 0x11: return "trace buffer full";
-		case 0x21: return "undef inst";
-		case 0x22: return "illegal inst";
-		case 0x23: return "dcplb prot violation";
-		case 0x24: return "misaligned data";
-		case 0x25: return "unrecoverable event";
-		case 0x26: return "dcplb miss";
-		case 0x27: return "multiple dcplb hit";
-		case 0x28: return "emulation watchpoint";
-		case 0x2a: return "misaligned inst";
-		case 0x2b: return "icplb prot violation";
-		case 0x2c: return "icplb miss";
-		case 0x2d: return "multiple icplb hit";
-		case 0x2e: return "illegal use of supervisor resource";
-		default:   return "undef";
-	}
-}
-
-void dump(struct pt_regs *fp)
-{
-	char buf[150];
-	int i;
-	uint16_t hwerrcause, excause;
-
-	if (!ENABLE_DUMP)
-		return;
-
-#ifndef CONFIG_CMD_KGDB
-	/* fp->ipend is normally garbage, so load it ourself */
-	fp->ipend = bfin_read_IPEND();
-#endif
-
-	hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P;
-	excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P;
-
-	printf("SEQUENCER STATUS:\n");
-	printf(" SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		fp->seqstat, fp->ipend, fp->syscfg);
-	printf("  HWERRCAUSE: 0x%x: %s\n", hwerrcause, strhwerrcause(hwerrcause));
-	printf("  EXCAUSE   : 0x%x: %s\n", excause, strexcause(excause));
-	for (i = 6; i <= 15; ++i) {
-		if (fp->ipend & (1 << i)) {
-			decode_address(buf, bfin_read32(EVT0 + 4*i));
-			printf("  physical IVG%i asserted : %s\n", i, buf);
-		}
-	}
-	decode_address(buf, fp->rete);
-	printf(" RETE: %s\n", buf);
-	decode_address(buf, fp->retn);
-	printf(" RETN: %s\n", buf);
-	decode_address(buf, fp->retx);
-	printf(" RETX: %s\n", buf);
-	decode_address(buf, fp->rets);
-	printf(" RETS: %s\n", buf);
-	/* we lie and store RETI in "pc" */
-	decode_address(buf, fp->pc);
-	printf(" RETI: %s\n", buf);
-
-	if (fp->seqstat & EXCAUSE) {
-		decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
-		printf("DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
-		printf("ICPLB_FAULT_ADDR: %s\n", buf);
-	}
-
-	printf("\nPROCESSOR STATE:\n");
-	printf(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
-		fp->r0, fp->r1, fp->r2, fp->r3);
-	printf(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
-		fp->r4, fp->r5, fp->r6, fp->r7);
-	printf(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
-		fp->p0, fp->p1, fp->p2, fp->p3);
-	printf(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
-		fp->p4, fp->p5, fp->fp, (unsigned long)fp);
-	printf(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
-		fp->lb0, fp->lt0, fp->lc0);
-	printf(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
-		fp->lb1, fp->lt1, fp->lc1);
-	printf(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
-		fp->b0, fp->l0, fp->m0, fp->i0);
-	printf(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
-		fp->b1, fp->l1, fp->m1, fp->i1);
-	printf(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
-		fp->b2, fp->l2, fp->m2, fp->i2);
-	printf(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
-		fp->b3, fp->l3, fp->m3, fp->i3);
-	printf("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
-
-	printf("USP : %08lx  ASTAT: %08lx\n",
-		fp->usp, fp->astat);
-
-	printf("\n");
-}
-
-void dump_bfin_trace_buffer(void)
-{
-	char buf[150];
-	unsigned long tflags;
-	int i = 0;
-
-	if (!ENABLE_DUMP)
-		return;
-
-	trace_buffer_save(tflags);
-
-	printf("Hardware Trace:\n");
-
-	if (bfin_read_TBUFSTAT() & TBUFCNT) {
-		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
-			decode_address(buf, bfin_read_TBUF());
-			printf("%4i Target : %s\n", i, buf);
-			decode_address(buf, bfin_read_TBUF());
-			printf("     Source : %s\n", buf);
-		}
-	}
-
-	trace_buffer_restore(tflags);
-}
-
-void bfin_panic(struct pt_regs *regs)
-{
-	if (ENABLE_DUMP) {
-		unsigned long tflags;
-		trace_buffer_save(tflags);
-	}
-
-	puts(
-		"\n"
-		"\n"
-		"\n"
-		"Ack! Something bad happened to the Blackfin!\n"
-		"\n"
-	);
-	dump(regs);
-	dump_bfin_trace_buffer();
-	puts("\n");
-	bfin_reset_or_hang();
-}
diff --git a/cpu/blackfin/watchdog.c b/cpu/blackfin/watchdog.c
deleted file mode 100644
index 1886bda..0000000
--- a/cpu/blackfin/watchdog.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * watchdog.c - driver for Blackfin on-chip watchdog
- *
- * Copyright (c) 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <asm/blackfin.h>
-
-void hw_watchdog_reset(void)
-{
-	bfin_write_WDOG_STAT(0);
-}
-
-void hw_watchdog_init(void)
-{
-	bfin_write_WDOG_CNT(5 * get_sclk());	/* 5 second timeout */
-	hw_watchdog_reset();
-	bfin_write_WDOG_CTL(0x0);
-}