* Patch by Paul Ruhland, 17 May 2004:

  - Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2

7 files changed, 1271 insertions, 0 deletions

diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile
new file mode 100644
index 0000000..b45bd6a
--- /dev/null
+++ b/cpu/lh7a40x/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= cpu.o speed.o interrupts.o serial.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk
new file mode 100644
index 0000000..cef7d26
--- /dev/null
+++ b/cpu/lh7a40x/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
new file mode 100644
index 0000000..2a2b578
--- /dev/null
+++ b/cpu/lh7a40x/cpu.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm920t.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+
+#ifdef MMU_DEBUG
+	printf ("p15/c1 is = %08lx\n", value);
+#endif
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+	printf ("write %08lx to p15/c1\n", value);
+#endif
+	__asm__ __volatile__(
+		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)		/* mmu off/on */
+#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
+#define C1_DC		(1<<2)		/* dcache off/on */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)		/* system protection */
+#define C1_ROM_PROT	(1<<9)		/* ROM protection */
+#define C1_IC		(1<<12)		/* icache off/on */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+
+int cpu_init (void)
+{
+	/*
+	 * setup up stacks if necessary
+	 */
+#ifdef CONFIG_USE_IRQ
+	DECLARE_GLOBAL_DATA_PTR;
+
+	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+	return 0;
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	unsigned long i;
+
+	disable_interrupts ();
+
+	/* turn off I/D-cache */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	i &= ~(C1_DC | C1_IC);
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush I/D-cache */
+	i = 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+	return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern void reset_cpu (ulong addr);
+
+	disable_interrupts ();
+	reset_cpu (0);
+	/*NOTREACHED*/
+	return (0);
+}
+
+void icache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+	return (read_p15_c1 () & C1_IC) != 0;
+}
+
+#ifdef USE_920T_MMU
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	reg &= ~C1_DC;
+	write_p15_c1 (reg);
+}
+
+int dcache_status (void)
+{
+	return (read_p15_c1 () & C1_DC) != 0;
+}
+#endif
diff --git a/cpu/lh7a40x/interrupts.c b/cpu/lh7a40x/interrupts.c
new file mode 100644
index 0000000..2ebbe56
--- /dev/null
+++ b/cpu/lh7a40x/interrupts.c
@@ -0,0 +1,326 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm920t.h>
+#include <lh7a40x.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+static ulong timer_load_val = 0;
+
+/* macro to read the 16 bit timer */
+static inline ulong READ_TIMER(void)
+{
+	LH7A40X_TIMERS_PTR(timers);
+	lh7a40x_timer_t* timer = &timers->timer1;
+
+	return (timer->value & 0x0000ffff);
+}
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+	unsigned long temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "bic %0, %0, #0x80\n"
+			     "msr cpsr_c, %0"
+			     : "=r" (temp)
+			     :
+			     : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+	unsigned long old,temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1"
+			     : "=r" (old), "=r" (temp)
+			     :
+			     : "memory");
+	return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+	return;
+}
+int disable_interrupts (void)
+{
+	return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
+	};
+
+	flags = condition_codes (regs);
+
+	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
+		"sp : %08lx  ip : %08lx  fp : %08lx\n",
+		instruction_pointer (regs),
+		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	printf ("undefined instruction\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	printf ("software interrupt\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	printf ("prefetch abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	printf ("data abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	printf ("not used\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	printf ("fast interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	printf ("interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+int interrupt_init (void)
+{
+	LH7A40X_TIMERS_PTR(timers);
+	lh7a40x_timer_t* timer = &timers->timer1;
+
+	/* a periodic timer using the 508kHz source */
+	timer->control = (TIMER_PER | TIMER_CLK508K);
+
+	if (timer_load_val == 0) {
+		/*
+		 * 10ms period with 508.469kHz clock = 5084
+		 */
+		timer_load_val = CFG_HZ/100;
+	}
+
+	/* load value for 10 ms timeout */
+	lastdec = timer->load = timer_load_val;
+
+	/* auto load, start timer */
+	timer->control = timer->control | TIMER_EN;
+	timestamp = 0;
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return (get_timer_masked() - base);
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+	ulong tmo,tmp;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CFG_HZ;
+		tmo /= 1000;
+	}
+	else {
+		if (usec > 1) {
+			tmo = usec * CFG_HZ;
+			tmo /= (1000*1000);
+		}
+		else
+			tmo = 1;
+	}
+
+	/* check for rollover during this delay */
+	tmp = get_timer (0);
+	if ((tmp + tmo) < tmp )
+		reset_timer_masked();  /* timer would roll over */
+	else
+		tmo += tmp;
+
+	while (get_timer_masked () < tmo);
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += (lastdec - now);
+	} else {
+		/* we have an overflow ... */
+		timestamp += ((lastdec + timer_load_val) - now);
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CFG_HZ;
+		tmo /= 1000;
+	}
+	else {
+		if (usec > 1) {
+			tmo = usec * CFG_HZ;
+			tmo /= (1000*1000);
+		}
+		else
+			tmo = 1;
+	}
+
+	reset_timer_masked ();
+
+	while (get_timer_masked () < tmo);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = timer_load_val * 100;
+
+	return tbclk;
+}
diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c
new file mode 100644
index 0000000..241d568
--- /dev/null
+++ b/cpu/lh7a40x/serial.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+#if defined(CONFIG_CONSOLE_UART1)
+# define UART_CONSOLE 1
+#elif defined(CONFIG_CONSOLE_UART2)
+# define UART_CONSOLE 2
+#elif defined(CONFIG_CONSOLE_UART3)
+# define UART_CONSOLE 3
+#else
+# error "No console configured ... "
+#endif
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+	int i;
+	unsigned int reg = 0;
+
+	/*
+	 * userguide 15.1.2.4
+	 *
+	 * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
+	 *
+	 *   UART_REF_FREQ = external system clock input / 2 (Hz)
+	 *   BAUD is desired baudrate (bits/s)
+	 *
+	 *   NOTE: we add (divisor/2) to numerator to round for
+	 *         more precision
+	 */
+	reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
+	uart->brcon = reg;
+
+	for (i = 0; i < 100; i++);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	/* UART must be enabled before writing to any config registers */
+	uart->con |= (UART_EN);
+
+#ifdef CONFIG_CONSOLE_UART1
+	/* infrared disabled */
+	uart->con |= UART_SIRD;
+#endif
+	/* loopback disabled */
+	uart->con &= ~(UART_LBE);
+
+	/* modem lines and tx/rx polarities */
+	uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
+
+	/* FIFO enable, N81 */
+	uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
+
+	/* set baudrate */
+	serial_setbrg ();
+
+	/* enable rx interrupt */
+	uart->inten |= UART_RI;
+
+	return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	/* wait for character to arrive */
+	while (uart->status & UART_RXFE);
+
+	return(uart->data & 0xff);
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+	switch(on) {
+	case 0:
+	default:
+		break; /* return current */
+	case 1:
+		hwflow = 1; /* turn on */
+		break;
+	case -1:
+		hwflow = 0; /* turn off */
+		break;
+	}
+	return hwflow;
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int be_quiet = 0;
+void disable_putc(void)
+{
+	be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+	be_quiet = 0;
+}
+#endif
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+#ifdef CONFIG_MODEM_SUPPORT
+	if (be_quiet)
+		return;
+#endif
+
+	/* wait for room in the tx FIFO */
+	while (!(uart->status & UART_TXFE));
+
+#ifdef CONFIG_HWFLOW
+	/* Wait for CTS up */
+	while(hwflow && !(uart->status & UART_CTS));
+#endif
+
+	uart->data = c;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	return(!(uart->status & UART_RXFE));
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
diff --git a/cpu/lh7a40x/speed.c b/cpu/lh7a40x/speed.c
new file mode 100644
index 0000000..e80b046
--- /dev/null
+++ b/cpu/lh7a40x/speed.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_PLLCLK (void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+/* return FCLK frequency */
+ulong get_FCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+	ulong maindiv1, maindiv2, prediv, ps;
+
+	/*
+	 * from userguide 6.1.1.2
+	 *
+	 * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
+	 *                   ((PREDIV+2) * (2^PS))
+	 */
+	maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
+	maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
+	prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
+	ps = (csc->clkset & CLKSET_PS) >> 16;
+
+	return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
+		((prediv + 2) * (1 << ps)));
+}
+
+
+/* return HCLK frequency */
+ulong get_HCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+
+	return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
+}
+
+/* return PCLK frequency */
+ulong get_PCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+
+	return (get_HCLK () /
+		(1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
+}
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
new file mode 100644
index 0000000..160f889
--- /dev/null
+++ b/cpu/lh7a40x/start.S
@@ -0,0 +1,426 @@
+/*
+ *  armboot - Startup Code for ARM920 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+	.word __bss_start
+
+.globl _bss_end
+_bss_end:
+	.word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+#define pWDTCTL		0x80001400  /* Watchdog Timer control register */
+#define pINTENC		0x8000050C  /* Interupt-Controller enable clear register */
+#define pCLKSET		0x80000420  /* clock divisor register */
+
+	/* disable watchdog, set watchdog control register to
+	 * all zeros (default reset)
+	 */
+	ldr     r0, =pWDTCTL
+	mov     r1, #0x0
+	str     r1, [r0]
+
+	/*
+	 * mask all IRQs by setting all bits in the INTENC register (default)
+	 */
+	mov	r1, #0xffffffff
+	ldr	r0, =pINTENC
+	str	r1, [r0]
+
+	/* FCLK:HCLK:PCLK = 1:2:2 */
+	/* default FCLK is 200 MHz, using 14.7456 MHz fin */
+	ldr	r0, =pCLKSET
+	ldr r1, =0x0004ee39
+@	ldr r1, =0x0005ee39	@ 1: 2: 4
+	str	r1, [r0]
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	blt	copy_loop		/* a 'ble' here actually copies     */
+					/*   four bytes of bss              */
+
+	/* Set up the stack						    */
+stack_setup:
+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+#ifdef CONFIG_USE_IRQ
+	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+
+clear_bss:
+	ldr	r0, _bss_start		/* find start of bss segment        */
+	@add	r0, r0, #4		/* start at first byte of bss       */
+					/*   why inc. 4 bytes past then?    */
+	ldr	r1, _bss_end		/* stop here                        */
+	mov 	r2, #0x00000000		/* clear                            */
+
+clbss_l:str	r2, [r0]		/* clear loop...                    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	bne	clbss_l
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	orr	r0, r0, #0x40000000	@ set bit 30 (nF) notFastBus
+	mcr	p15, 0, r0, c1, c0, 0
+
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip, lr
+	bl	memsetup
+	mov	lr, ip
+
+	mov	pc, lr
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	ldr	r2, _armboot_start
+	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	ldmia	r2, {r2 - r3}			@ get pc, cpsr
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_start		@ setup our mode stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	bl	disable_interrupts
+
+	/* Disable watchdog */
+	ldr	r1, =pWDTCTL
+	mov	r3, #0
+	str	r3, [r1]
+
+	/* reset counter */
+	ldr	r3, =0x00001984
+	str	r3, [r1, #4]
+
+	/* Enable the watchdog */
+	mov	r3, #1
+	str	r3, [r1]
+
+_loop_forever:
+	b	_loop_forever