Atmel MCI driver

Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.

The AT91 ARM-based CPUs use basically the same hardware, so it should
be possible to share this driver, but no effort has been made so far.

Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

3 files changed, 675 insertions, 1 deletions

diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index 3f1bb07..f69b1f3 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -30,7 +30,7 @@ LIB	:= $(obj)lib$(CPU).a
 START	:= start.o
 SOBJS	:= entry.o
 COBJS	:= cpu.o hsdramc.o exception.o cache.o
-COBJS	+= interrupts.o pio.o
+COBJS	+= interrupts.o pio.o atmel_mci.o
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 START	:= $(addprefix $(obj),$(START))
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
new file mode 100644
index 0000000..3e3789b
--- /dev/null
+++ b/cpu/at32ap/atmel_mci.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_MMC
+
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "atmel_mci.h"
+
+#ifdef DEBUG
+#define pr_debug(fmt, args...) printf(fmt, ##args)
+#else
+#define pr_debug(...) do { } while(0)
+#endif
+
+#ifndef CFG_MMC_CLK_OD
+#define CFG_MMC_CLK_OD		150000
+#endif
+
+#ifndef CFG_MMC_CLK_PP
+#define CFG_MMC_CLK_PP		5000000
+#endif
+
+#ifndef CFG_MMC_OP_COND
+#define CFG_MMC_OP_COND		0x00100000
+#endif
+
+#define MMC_DEFAULT_BLKLEN	512
+#define MMC_DEFAULT_RCA		1
+
+static unsigned int mmc_rca;
+static block_dev_desc_t mmc_blkdev;
+
+block_dev_desc_t *mmc_get_dev(int dev)
+{
+	return &mmc_blkdev;
+}
+
+static void mci_set_mode(unsigned long hz, unsigned long blklen)
+{
+	unsigned long bus_hz;
+	unsigned long clkdiv;
+
+	bus_hz = get_mci_clk_rate();
+	clkdiv = (bus_hz / hz) / 2 - 1;
+
+	pr_debug("mmc: setting clock %lu Hz, block size %lu\n",
+		 hz, blklen);
+
+	if (clkdiv & ~255UL) {
+		clkdiv = 255;
+		printf("mmc: clock %lu too low; setting CLKDIV to 255\n",
+			hz);
+	}
+
+	blklen &= 0xfffc;
+	mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv)
+			 | MMCI_BF(BLKLEN, blklen)));
+}
+
+#define RESP_NO_CRC	1
+#define R1		MMCI_BF(RSPTYP, 1)
+#define R2		MMCI_BF(RSPTYP, 2)
+#define R3		(R1 | RESP_NO_CRC)
+#define R6		R1
+#define NID		MMCI_BF(MAXLAT, 0)
+#define NCR		MMCI_BF(MAXLAT, 1)
+#define TRCMD_START	MMCI_BF(TRCMD, 1)
+#define TRDIR_READ	MMCI_BF(TRDIR, 1)
+#define TRTYP_BLOCK	MMCI_BF(TRTYP, 0)
+#define INIT_CMD	MMCI_BF(SPCMD, 1)
+#define OPEN_DRAIN	MMCI_BF(OPDCMD, 1)
+
+#define ERROR_FLAGS	(MMCI_BIT(DTOE)			\
+			 | MMCI_BIT(RDIRE)		\
+			 | MMCI_BIT(RENDE)		\
+			 | MMCI_BIT(RINDE)		\
+			 | MMCI_BIT(RTOE))
+
+static int
+mmc_cmd(unsigned long cmd, unsigned long arg,
+	void *resp, unsigned long flags)
+{
+	unsigned long *response = resp;
+	int i, response_words = 0;
+	unsigned long error_flags;
+	u32 status;
+
+	pr_debug("mmc: CMD%lu 0x%lx (flags 0x%lx)\n",
+		 cmd, arg, flags);
+
+	error_flags = ERROR_FLAGS;
+	if (!(flags & RESP_NO_CRC))
+		error_flags |= MMCI_BIT(RCRCE);
+
+	flags &= ~MMCI_BF(CMDNB, ~0UL);
+
+	if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_48_BIT_RESP)
+		response_words = 1;
+	else if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_136_BIT_RESP)
+		response_words = 4;
+
+	mmci_writel(ARGR, arg);
+	mmci_writel(CMDR, cmd | flags);
+	do {
+		udelay(40);
+		status = mmci_readl(SR);
+	} while (!(status & MMCI_BIT(CMDRDY)));
+
+	pr_debug("mmc: status 0x%08lx\n", status);
+
+	if (status & ERROR_FLAGS) {
+		printf("mmc: command %lu failed (status: 0x%08lx)\n",
+		       cmd, status);
+		return -EIO;
+	}
+
+	if (response_words)
+		pr_debug("mmc: response:");
+
+	for (i = 0; i < response_words; i++) {
+		response[i] = mmci_readl(RSPR);
+		pr_debug(" %08lx", response[i]);
+	}
+	pr_debug("\n");
+
+	return 0;
+}
+
+static int mmc_acmd(unsigned long cmd, unsigned long arg,
+		    void *resp, unsigned long flags)
+{
+	unsigned long aresp[4];
+	int ret;
+
+	/*
+	 * Seems like the APP_CMD part of an ACMD has 64 cycles max
+	 * latency even though the ACMD part doesn't. This isn't
+	 * entirely clear in the SD Card spec, but some cards refuse
+	 * to work if we attempt to use 5 cycles max latency here...
+	 */
+	ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp,
+		      R1 | NCR | (flags & OPEN_DRAIN));
+	if (ret)
+		return ret;
+	if ((aresp[0] & (R1_ILLEGAL_COMMAND | R1_APP_CMD)) != R1_APP_CMD)
+		return -ENODEV;
+
+	ret = mmc_cmd(cmd, arg, resp, flags);
+	return ret;
+}
+
+static unsigned long
+mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
+	  unsigned long *buffer)
+{
+	int ret, i = 0;
+	unsigned long resp[4];
+	unsigned long card_status, data;
+	unsigned long wordcount;
+	u32 status;
+
+	if (blkcnt == 0)
+		return 0;
+
+	pr_debug("mmc_bread: dev %d, start %lx, blkcnt %lx\n",
+		 dev, start, blkcnt);
+
+	/* Put the device into Transfer state */
+	ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
+	if (ret) goto fail;
+
+	/* Set block length */
+	ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
+	if (ret) goto fail;
+
+	pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
+
+	for (i = 0; i < blkcnt; i++, start++) {
+		ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK,
+			      start * mmc_blkdev.blksz, resp,
+			      (R1 | NCR | TRCMD_START | TRDIR_READ
+			       | TRTYP_BLOCK));
+		if (ret) goto fail;
+
+		ret = -EIO;
+		wordcount = 0;
+		do {
+			do {
+				status = mmci_readl(SR);
+				if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
+					goto fail;
+			} while (!(status & MMCI_BIT(RXRDY)));
+
+			if (status & MMCI_BIT(RXRDY)) {
+				data = mmci_readl(RDR);
+				// pr_debug("%x\n", data);
+				*buffer++ = data;
+				wordcount++;
+			}
+		} while(wordcount < (512 / 4));
+
+		pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount);
+
+		do {
+			status = mmci_readl(SR);
+		} while (!(status & MMCI_BIT(BLKE)));
+
+		putc('.');
+	}
+
+out:
+	/* Put the device back into Standby state */
+	mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
+	return i;
+
+fail:
+	mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
+	printf("mmc: bread failed, card status = ", card_status);
+	goto out;
+}
+
+static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+{
+	cid->mid = resp[0] >> 24;
+	cid->oid = (resp[0] >> 8) & 0xffff;
+	cid->pnm[0] = resp[0];
+	cid->pnm[1] = resp[1] >> 24;
+	cid->pnm[2] = resp[1] >> 16;
+	cid->pnm[3] = resp[1] >> 8;
+	cid->pnm[4] = resp[1];
+	cid->pnm[5] = resp[2] >> 24;
+	cid->pnm[6] = 0;
+	cid->prv = resp[2] >> 16;
+	cid->psn = (resp[2] << 16) | (resp[3] >> 16);
+	cid->mdt = resp[3] >> 8;
+}
+
+static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+{
+	cid->mid = resp[0] >> 24;
+	cid->oid = (resp[0] >> 8) & 0xffff;
+	cid->pnm[0] = resp[0];
+	cid->pnm[1] = resp[1] >> 24;
+	cid->pnm[2] = resp[1] >> 16;
+	cid->pnm[3] = resp[1] >> 8;
+	cid->pnm[4] = resp[1];
+	cid->pnm[5] = 0;
+	cid->pnm[6] = 0;
+	cid->prv = resp[2] >> 24;
+	cid->psn = (resp[2] << 8) | (resp[3] >> 24);
+	cid->mdt = (resp[3] >> 8) & 0x0fff;
+}
+
+static void mmc_dump_cid(const struct mmc_cid *cid)
+{
+	printf("Manufacturer ID:       %02lX\n", cid->mid);
+	printf("OEM/Application ID:    %04lX\n", cid->oid);
+	printf("Product name:          %s\n", cid->pnm);
+	printf("Product Revision:      %lu.%lu\n",
+	       cid->prv >> 4, cid->prv & 0x0f);
+	printf("Product Serial Number: %lu\n", cid->psn);
+	printf("Manufacturing Date:    %02lu/%02lu\n",
+	       cid->mdt >> 4, cid->mdt & 0x0f);
+}
+
+static void mmc_dump_csd(const struct mmc_csd *csd)
+{
+	unsigned long *csd_raw = (unsigned long *)csd;
+	printf("CSD data: %08lx %08lx %08lx %08lx\n",
+	       csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]);
+	printf("CSD structure version:   1.%u\n", csd->csd_structure);
+	printf("MMC System Spec version: %u\n", csd->spec_vers);
+	printf("Card command classes:    %03x\n", csd->ccc);
+	printf("Read block length:       %u\n", 1 << csd->read_bl_len);
+	if (csd->read_bl_partial)
+		puts("Supports partial reads\n");
+	else
+		puts("Does not support partial reads\n");
+	printf("Write block length:      %u\n", 1 << csd->write_bl_len);
+	if (csd->write_bl_partial)
+		puts("Supports partial writes\n");
+	else
+		puts("Does not support partial writes\n");
+	if (csd->wp_grp_enable)
+		printf("Supports group WP:      %u\n", csd->wp_grp_size + 1);
+	else
+		puts("Does not support group WP\n");
+	printf("Card capacity:		%u bytes\n",
+	       (csd->c_size + 1) * (1 << (csd->c_size_mult + 2)) *
+	       (1 << csd->read_bl_len));
+	printf("File format:            %u/%u\n",
+	       csd->file_format_grp, csd->file_format);
+	puts("Write protection:        ");
+	if (csd->perm_write_protect)
+		puts(" permanent");
+	if (csd->tmp_write_protect)
+		puts(" temporary");
+	putc('\n');
+}
+
+static int mmc_idle_cards(void)
+{
+	int ret;
+
+	/* Reset and initialize all cards */
+	ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
+	if (ret)
+		return ret;
+
+	/* Keep the bus idle for 74 clock cycles */
+	return mmc_cmd(0, 0, NULL, INIT_CMD);
+}
+
+static int sd_init_card(struct mmc_cid *cid, int verbose)
+{
+	unsigned long resp[4];
+	int i, ret = 0;
+
+	mmc_idle_cards();
+	for (i = 0; i < 1000; i++) {
+		ret = mmc_acmd(MMC_ACMD_SD_SEND_OP_COND, CFG_MMC_OP_COND,
+			       resp, R3 | NID);
+		if (ret || (resp[0] & 0x80000000))
+			break;
+		ret = -ETIMEDOUT;
+	}
+
+	if (ret)
+		return ret;
+
+	ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID);
+	if (ret)
+		return ret;
+	sd_parse_cid(cid, resp);
+	if (verbose)
+		mmc_dump_cid(cid);
+
+	/* Get RCA of the card that responded */
+	ret = mmc_cmd(MMC_CMD_SD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR);
+	if (ret)
+		return ret;
+
+	mmc_rca = resp[0] >> 16;
+	if (verbose)
+		printf("SD Card detected (RCA %u)\n", mmc_rca);
+	return 0;
+}
+
+static int mmc_init_card(struct mmc_cid *cid, int verbose)
+{
+	unsigned long resp[4];
+	int i, ret = 0;
+
+	mmc_idle_cards();
+	for (i = 0; i < 1000; i++) {
+		ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp,
+			      R3 | NID | OPEN_DRAIN);
+		if (ret || (resp[0] & 0x80000000))
+			break;
+		ret = -ETIMEDOUT;
+	}
+
+	if (ret)
+		return ret;
+
+	/* Get CID of all cards. FIXME: Support more than one card */
+	ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID | OPEN_DRAIN);
+	if (ret)
+		return ret;
+	mmc_parse_cid(cid, resp);
+	if (verbose)
+		mmc_dump_cid(cid);
+
+	/* Set Relative Address of the card that responded */
+	ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp,
+		      R1 | NCR | OPEN_DRAIN);
+	return ret;
+}
+
+int mmc_init(int verbose)
+{
+	struct mmc_cid cid;
+	struct mmc_csd csd;
+	int ret;
+
+	/* Initialize controller */
+	mmci_writel(CR, MMCI_BIT(SWRST));
+	mmci_writel(CR, MMCI_BIT(MCIEN));
+	mmci_writel(DTOR, 0x5f);
+	mmci_writel(IDR, ~0UL);
+	mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+
+	ret = sd_init_card(&cid, verbose);
+	if (ret) {
+		mmc_rca = MMC_DEFAULT_RCA;
+		ret = mmc_init_card(&cid, verbose);
+	}
+	if (ret)
+		return ret;
+
+	/* Get CSD from the card */
+	ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, &csd, R2 | NCR);
+	if (ret)
+		return ret;
+	if (verbose)
+		mmc_dump_csd(&csd);
+
+	/* Initialize the blockdev structure */
+	mmc_blkdev.if_type = IF_TYPE_MMC;
+	mmc_blkdev.part_type = PART_TYPE_DOS;
+	mmc_blkdev.block_read = mmc_bread;
+	sprintf((char *)mmc_blkdev.vendor,
+		"Man %02x%04x Snr %08x",
+		cid.mid, cid.oid, cid.psn);
+	strncpy((char *)mmc_blkdev.product, cid.pnm,
+		sizeof(mmc_blkdev.product));
+	sprintf((char *)mmc_blkdev.revision, "%x %x",
+		cid.prv >> 4, cid.prv & 0x0f);
+	mmc_blkdev.blksz = 1 << csd.read_bl_len;
+	mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
+
+	mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);
+
+#if 0
+	if (fat_register_device(&mmc_blkdev, 1))
+		printf("Could not register MMC fat device\n");
+#else
+	init_part(&mmc_blkdev);
+#endif
+
+	return 0;
+}
+
+int mmc_read(ulong src, uchar *dst, int size)
+{
+	return -ENOSYS;
+}
+
+int mmc_write(uchar *src, ulong dst, int size)
+{
+	return -ENOSYS;
+}
+
+int mmc2info(ulong addr)
+{
+	return 0;
+}
+
+#endif /* CONFIG_MMC */
diff --git a/cpu/at32ap/atmel_mci.h b/cpu/at32ap/atmel_mci.h
new file mode 100644
index 0000000..0ffbc4f
--- /dev/null
+++ b/cpu/at32ap/atmel_mci.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CPU_AT32AP_ATMEL_MCI_H__
+#define __CPU_AT32AP_ATMEL_MCI_H__
+
+/* Atmel MultiMedia Card Interface (MCI) registers */
+#define MMCI_CR					0x0000
+#define MMCI_MR					0x0004
+#define MMCI_DTOR				0x0008
+#define MMCI_SDCR				0x000c
+#define MMCI_ARGR				0x0010
+#define MMCI_CMDR				0x0014
+#define MMCI_RSPR				0x0020
+#define MMCI_RSPR1				0x0024
+#define MMCI_RSPR2				0x0028
+#define MMCI_RSPR3				0x002c
+#define MMCI_RDR				0x0030
+#define MMCI_TDR				0x0034
+#define MMCI_SR					0x0040
+#define MMCI_IER				0x0044
+#define MMCI_IDR				0x0048
+#define MMCI_IMR				0x004c
+
+/* Bitfields in CR */
+#define MMCI_MCIEN_OFFSET			0
+#define MMCI_MCIEN_SIZE				1
+#define MMCI_MCIDIS_OFFSET			1
+#define MMCI_MCIDIS_SIZE			1
+#define MMCI_PWSEN_OFFSET			2
+#define MMCI_PWSEN_SIZE				1
+#define MMCI_PWSDIS_OFFSET			3
+#define MMCI_PWSDIS_SIZE			1
+#define MMCI_SWRST_OFFSET			7
+#define MMCI_SWRST_SIZE				1
+
+/* Bitfields in MR */
+#define MMCI_CLKDIV_OFFSET			0
+#define MMCI_CLKDIV_SIZE			8
+#define MMCI_PWSDIV_OFFSET			8
+#define MMCI_PWSDIV_SIZE			3
+#define MMCI_PDCPADV_OFFSET			14
+#define MMCI_PDCPADV_SIZE			1
+#define MMCI_PDCMODE_OFFSET			15
+#define MMCI_PDCMODE_SIZE			1
+#define MMCI_BLKLEN_OFFSET			16
+#define MMCI_BLKLEN_SIZE			16
+
+/* Bitfields in DTOR */
+#define MMCI_DTOCYC_OFFSET			0
+#define MMCI_DTOCYC_SIZE			4
+#define MMCI_DTOMUL_OFFSET			4
+#define MMCI_DTOMUL_SIZE			3
+
+/* Bitfields in SDCR */
+#define MMCI_SCDSEL_OFFSET			0
+#define MMCI_SCDSEL_SIZE			4
+#define MMCI_SCDBUS_OFFSET			7
+#define MMCI_SCDBUS_SIZE			1
+
+/* Bitfields in ARGR */
+#define MMCI_ARG_OFFSET				0
+#define MMCI_ARG_SIZE				32
+
+/* Bitfields in CMDR */
+#define MMCI_CMDNB_OFFSET			0
+#define MMCI_CMDNB_SIZE				6
+#define MMCI_RSPTYP_OFFSET			6
+#define MMCI_RSPTYP_SIZE			2
+#define MMCI_SPCMD_OFFSET			8
+#define MMCI_SPCMD_SIZE				3
+#define MMCI_OPDCMD_OFFSET			11
+#define MMCI_OPDCMD_SIZE			1
+#define MMCI_MAXLAT_OFFSET			12
+#define MMCI_MAXLAT_SIZE			1
+#define MMCI_TRCMD_OFFSET			16
+#define MMCI_TRCMD_SIZE				2
+#define MMCI_TRDIR_OFFSET			18
+#define MMCI_TRDIR_SIZE				1
+#define MMCI_TRTYP_OFFSET			19
+#define MMCI_TRTYP_SIZE				2
+
+/* Bitfields in RSPRx */
+#define MMCI_RSP_OFFSET				0
+#define MMCI_RSP_SIZE				32
+
+/* Bitfields in SR/IER/IDR/IMR */
+#define MMCI_CMDRDY_OFFSET			0
+#define MMCI_CMDRDY_SIZE			1
+#define MMCI_RXRDY_OFFSET			1
+#define MMCI_RXRDY_SIZE				1
+#define MMCI_TXRDY_OFFSET			2
+#define MMCI_TXRDY_SIZE				1
+#define MMCI_BLKE_OFFSET			3
+#define MMCI_BLKE_SIZE				1
+#define MMCI_DTIP_OFFSET			4
+#define MMCI_DTIP_SIZE				1
+#define MMCI_NOTBUSY_OFFSET			5
+#define MMCI_NOTBUSY_SIZE			1
+#define MMCI_ENDRX_OFFSET			6
+#define MMCI_ENDRX_SIZE				1
+#define MMCI_ENDTX_OFFSET			7
+#define MMCI_ENDTX_SIZE				1
+#define MMCI_RXBUFF_OFFSET			14
+#define MMCI_RXBUFF_SIZE			1
+#define MMCI_TXBUFE_OFFSET			15
+#define MMCI_TXBUFE_SIZE			1
+#define MMCI_RINDE_OFFSET			16
+#define MMCI_RINDE_SIZE				1
+#define MMCI_RDIRE_OFFSET			17
+#define MMCI_RDIRE_SIZE				1
+#define MMCI_RCRCE_OFFSET			18
+#define MMCI_RCRCE_SIZE				1
+#define MMCI_RENDE_OFFSET			19
+#define MMCI_RENDE_SIZE				1
+#define MMCI_RTOE_OFFSET			20
+#define MMCI_RTOE_SIZE				1
+#define MMCI_DCRCE_OFFSET			21
+#define MMCI_DCRCE_SIZE				1
+#define MMCI_DTOE_OFFSET			22
+#define MMCI_DTOE_SIZE				1
+#define MMCI_OVRE_OFFSET			30
+#define MMCI_OVRE_SIZE				1
+#define MMCI_UNRE_OFFSET			31
+#define MMCI_UNRE_SIZE				1
+
+/* Constants for DTOMUL */
+#define MMCI_DTOMUL_1_CYCLE			0
+#define MMCI_DTOMUL_16_CYCLES			1
+#define MMCI_DTOMUL_128_CYCLES			2
+#define MMCI_DTOMUL_256_CYCLES			3
+#define MMCI_DTOMUL_1024_CYCLES			4
+#define MMCI_DTOMUL_4096_CYCLES			5
+#define MMCI_DTOMUL_65536_CYCLES		6
+#define MMCI_DTOMUL_1048576_CYCLES		7
+
+/* Constants for RSPTYP */
+#define MMCI_RSPTYP_NO_RESP			0
+#define MMCI_RSPTYP_48_BIT_RESP			1
+#define MMCI_RSPTYP_136_BIT_RESP		2
+
+/* Constants for SPCMD */
+#define MMCI_SPCMD_NO_SPEC_CMD			0
+#define MMCI_SPCMD_INIT_CMD			1
+#define MMCI_SPCMD_SYNC_CMD			2
+#define MMCI_SPCMD_INT_CMD			4
+#define MMCI_SPCMD_INT_RESP			5
+
+/* Constants for TRCMD */
+#define MMCI_TRCMD_NO_TRANS			0
+#define MMCI_TRCMD_START_TRANS			1
+#define MMCI_TRCMD_STOP_TRANS			2
+
+/* Constants for TRTYP */
+#define MMCI_TRTYP_BLOCK			0
+#define MMCI_TRTYP_MULTI_BLOCK			1
+#define MMCI_TRTYP_STREAM			2
+
+/* Bit manipulation macros */
+#define MMCI_BIT(name)					\
+	(1 << MMCI_##name##_OFFSET)
+#define MMCI_BF(name,value)				\
+	(((value) & ((1 << MMCI_##name##_SIZE) - 1))	\
+	 << MMCI_##name##_OFFSET)
+#define MMCI_BFEXT(name,value)				\
+	(((value) >> MMCI_##name##_OFFSET)\
+	 & ((1 << MMCI_##name##_SIZE) - 1))
+#define MMCI_BFINS(name,value,old)			\
+	(((old) & ~(((1 << MMCI_##name##_SIZE) - 1)	\
+		    << MMCI_##name##_OFFSET))		\
+	 | MMCI_BF(name,value))
+
+/* Register access macros */
+#define mmci_readl(reg)					\
+	readl((void *)MMCI_BASE + MMCI_##reg)
+#define mmci_writel(reg,value)				\
+	writel((value), (void *)MMCI_BASE + MMCI_##reg)
+
+#endif /* __CPU_AT32AP_ATMEL_MCI_H__ */