dm: Add support for scsi/sata based devices

All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

2 files changed, 78 insertions, 2 deletions

diff --git a/common/board_r.c b/common/board_r.c
index 5496f45..a373352 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -620,7 +620,7 @@ static int initr_ambapp_print(void)
 }
 #endif
 
-#if defined(CONFIG_SCSI)
+#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
 static int initr_scsi(void)
 {
 	puts("SCSI:  ");
@@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = {
 	initr_ambapp_print,
 #endif
 #endif
-#ifdef CONFIG_SCSI
+#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
 	INIT_FUNC_WATCHDOG_RESET
 	initr_scsi,
 #endif
diff --git a/common/scsi.c b/common/scsi.c
index 04add624..e7efa5a 100644
--- a/common/scsi.c
+++ b/common/scsi.c
@@ -10,7 +10,10 @@
 #include <inttypes.h>
 #include <pci.h>
 #include <scsi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
 
+#if !defined(CONFIG_DM_SCSI)
 #ifdef CONFIG_SCSI_DEV_LIST
 #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
 #else
@@ -31,6 +34,7 @@
 #endif
 #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
 #endif
+#endif
 
 #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
 const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
@@ -39,11 +43,13 @@ static ccb tempccb;	/* temporary scsi command buffer */
 
 static unsigned char tempbuff[512]; /* temporary data buffer */
 
+#if !defined(CONFIG_DM_SCSI)
 static int scsi_max_devs; /* number of highest available scsi device */
 
 static int scsi_curr_dev; /* current device */
 
 static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
+#endif
 
 /* almost the maximum amount of the scsi_ext command.. */
 #define SCSI_MAX_READ_BLK 0xFFFF
@@ -444,6 +450,7 @@ static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc)
 #endif
 }
 
+#if !defined(CONFIG_DM_SCSI)
 /**
  * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
  *
@@ -460,6 +467,7 @@ static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
 
 	scsi_init_dev_desc_priv(dev_desc);
 }
+#endif
 
 /**
  * scsi_detect_dev - Detect scsi device
@@ -540,6 +548,73 @@ removable:
  * (re)-scan the scsi bus and reports scsi device info
  * to the user if mode = 1
  */
+#if defined(CONFIG_DM_SCSI)
+int scsi_scan(int mode)
+{
+	unsigned char i, lun;
+	struct uclass *uc;
+	struct udevice *dev; /* SCSI controller */
+	int ret;
+
+	if (mode == 1)
+		printf("scanning bus for devices...\n");
+
+	ret = uclass_get(UCLASS_SCSI, &uc);
+	if (ret)
+		return ret;
+
+	uclass_foreach_dev(dev, uc) {
+		struct scsi_platdata *plat; /* scsi controller platdata */
+
+		/* probe SCSI controller driver */
+		ret = device_probe(dev);
+		if (ret)
+			return ret;
+
+		/* Get controller platdata */
+		plat = dev_get_platdata(dev);
+
+		for (i = 0; i < plat->max_id; i++) {
+			for (lun = 0; lun < plat->max_lun; lun++) {
+				struct udevice *bdev; /* block device */
+				/* block device description */
+				struct blk_desc *bdesc;
+				char str[10];
+
+				/*
+				 * Create only one block device and do detection
+				 * to make sure that there won't be a lot of
+				 * block devices created
+				 */
+				snprintf(str, sizeof(str), "id%dlun%d", i, lun);
+				ret = blk_create_devicef(dev, "scsi_blk",
+							  str, IF_TYPE_SCSI,
+							  -1, 0, 0, &bdev);
+				if (ret) {
+					debug("Can't create device\n");
+					return ret;
+				}
+				bdesc = dev_get_uclass_platdata(bdev);
+
+				scsi_init_dev_desc_priv(bdesc);
+				bdesc->lun = lun;
+				ret = scsi_detect_dev(i, bdesc);
+				if (ret) {
+					device_unbind(bdev);
+					continue;
+				}
+
+				if (mode == 1) {
+					printf("  Device %d: ", 0);
+					dev_print(bdesc);
+				} /* if mode */
+			} /* next LUN */
+		}
+	}
+
+	return 0;
+}
+#else
 int scsi_scan(int mode)
 {
 	unsigned char i, lun;
@@ -576,6 +651,7 @@ int scsi_scan(int mode)
 #endif
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_BLK
 static const struct blk_ops scsi_blk_ops = {