diff options
author | Simon Glass <sjg@chromium.org> | 2023-09-14 10:55:54 -0600 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2023-09-19 11:36:26 -0400 |
commit | 064a57d019781906e32ccaa16ce122e254dc6533 (patch) | |
tree | add28f69ad5fa9af08e9399e69074304c54a40ac /boot | |
parent | 4a8fcb6e0b384c42906e411f051e3c54d168516d (diff) | |
download | u-boot-064a57d019781906e32ccaa16ce122e254dc6533.zip u-boot-064a57d019781906e32ccaa16ce122e254dc6533.tar.gz u-boot-064a57d019781906e32ccaa16ce122e254dc6533.tar.bz2 |
Kconfig: Move TEXT_BASE et al under general setup
These don't relate to booting. Move them out of there and into the same
place as the other related settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'boot')
-rw-r--r-- | boot/Kconfig | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/boot/Kconfig b/boot/Kconfig index a885fea..4ebcf31 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -693,71 +693,6 @@ config SUPPORT_RAW_INITRD address of the initrd must be augmented by it's size, in the following format: "<initrd address>:<initrd size>". -config HAVE_TEXT_BASE - bool - depends on !NIOS2 && !XTENSA - depends on !EFI_APP - default y - -config TEXT_BASE - depends on HAVE_TEXT_BASE - default 0x0 if POSITION_INDEPENDENT - default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 - default 0x81700000 if MACH_SUNIV - default 0x2a000000 if MACH_SUN9I - default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256 - default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64 - hex "Text Base" - help - The address in memory that U-Boot will be running from, initially. - -config HAVE_SYS_MONITOR_BASE - bool - depends on ARC || MIPS || M68K || NIOS2 || PPC || XTENSA || X86 \ - || ENV_IS_IN_FLASH || MTD_NOR_FLASH - depends on !EFI_APP - default y - -config SYS_MONITOR_BASE - depends on HAVE_SYS_MONITOR_BASE - hex "Physical start address of boot monitor code" - default TEXT_BASE - help - The physical start address of boot monitor code (which is the same as - CONFIG_TEXT_BASE when linking) and the same as CFG_SYS_FLASH_BASE - when booting from flash. - -config SPL_SYS_MONITOR_BASE - depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE - hex "Physical start address of SPL monitor code" - default SPL_TEXT_BASE - -config TPL_SYS_MONITOR_BASE - depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE - hex "Physical start address of TPL monitor code" - -config DYNAMIC_SYS_CLK_FREQ - bool "Determine CPU clock frequency at run-time" - help - Implement a get_board_sys_clk function that will determine the CPU - clock frequency at run time, rather than define it statically. - -config SYS_CLK_FREQ - depends on !DYNAMIC_SYS_CLK_FREQ - int "CPU clock frequency" - default 125000000 if ARCH_LS1012A - default 100000000 if ARCH_P2020 || ARCH_T1024 || ARCH_T1042 || \ - ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 - default 66666666 if ARCH_P1010 || ARCH_P1020 || ARCH_T4240 - default 66660000 if ARCH_T2080 - default 33333333 if RCAR_GEN3 - default 24000000 if ARCH_EXYNOS - default 20000000 if RCAR_GEN2 - default 0 - help - A static value for the CPU frequency. Note that if not required - for a given SoC, this can be left at 0. - config ARCH_FIXUP_FDT_MEMORY bool "Enable arch_fixup_memory_banks() call" default y |