mpc8260: remove muas3001 board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>

4 files changed, 0 insertions, 359 deletions

diff --git a/board/muas3001/Kconfig b/board/muas3001/Kconfig
deleted file mode 100644
index 94a00b3..0000000
--- a/board/muas3001/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MUAS3001
-
-config SYS_BOARD
-	default "muas3001"
-
-config SYS_CONFIG_NAME
-	default "muas3001"
-
-endif
diff --git a/board/muas3001/MAINTAINERS b/board/muas3001/MAINTAINERS
deleted file mode 100644
index cfb5983..0000000
--- a/board/muas3001/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MUAS3001 BOARD
-M:	Heiko Schocher <hs@denx.de>
-S:	Maintained
-F:	board/muas3001/
-F:	include/configs/muas3001.h
-F:	configs/muas3001_defconfig
-F:	configs/muas3001_dev_defconfig
diff --git a/board/muas3001/Makefile b/board/muas3001/Makefile
deleted file mode 100644
index ef04960..0000000
--- a/board/muas3001/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= muas3001.o
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
deleted file mode 100644
index e0c4dba..0000000
--- a/board/muas3001/muas3001.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { 0,          0,   0,   0,   0,   0 }, /* PA31            */
-	/* PA30 */ { 0,          0,   0,   0,   0,   0 }, /* PA30            */
-	/* PA29 */ { 1,          1,   1,   1,   0,   0 }, /* FCC1 TXER */
-	/* PA28 */ { 1,          1,   1,   1,   0,   0 }, /* FCC1 TXEN */
-	/* PA27 */ { 1,          1,   1,   0,   0,   0 }, /* FCC1 RXDV */
-	/* PA26 */ { 1,          1,   1,   0,   0,   0 }, /* FCC1 RXER */
-	/* PA25 */ { 1,          0,   0,   1,   0,   0 }, /* ETH_PWRDWN      */
-	/* PA24 */ { 1,          0,   0,   1,   0,   1 }, /* ETH_RESET       */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD3 */
-	/* PA20 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD2 */
-	/* PA19 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD1 */
-	/* PA18 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD0 */
-	/* PA17 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD0 */
-	/* PA16 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD1 */
-	/* PA15 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD2 */
-	/* PA14 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD3 */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 1,          0,   0,   1,   0,   0 }, /* ETH_SLEEP       */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 1,          0,   0,   1,   0,   0 }, /* MDIO            */
-	/* PA9  */ { 1,          0,   0,   1,   0,   0 }, /* MDC             */
-	/* PA8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { 0,          0,   0,   0,   0,   0 }, /* PB31            */
-	/* PB30 */ { 0,          0,   0,   0,   0,   0 }, /* PB30            */
-	/* PB29 */ { 0,          0,   0,   0,   0,   0 }, /* PB29            */
-	/* PB28 */ { 1,          1,   1,   1,   0,   0 }, /* SCC1 TxD        */
-	/* PB27 */ { 0,          0,   0,   0,   0,   0 }, /* PB27            */
-	/* PB26 */ { 0,          0,   0,   0,   0,   0 }, /* PB26            */
-	/* PB25 */ { 0,          0,   0,   0,   0,   0 }, /* PB25            */
-	/* PB24 */ { 0,          0,   0,   0,   0,   0 }, /* PB24            */
-	/* PB23 */ { 0,          0,   0,   0,   0,   0 }, /* PB23            */
-	/* PB22 */ { 0,          0,   0,   0,   0,   0 }, /* PB22            */
-	/* PB21 */ { 0,          0,   0,   0,   0,   0 }, /* PB21            */
-	/* PB20 */ { 0,          0,   0,   0,   0,   0 }, /* PB20            */
-	/* PB19 */ { 0,          0,   0,   0,   0,   0 }, /* PB19            */
-	/* PB18 */ { 0,          0,   0,   0,   0,   0 }, /* PB18            */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 1,          1,   0,   0,   0,   0 }, /* SCC2 RxD        */
-	/* PB14 */ { 1,          1,   0,   0,   0,   0 }, /* SCC3 RxD        */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 1,          1,   1,   1,   0,   0 }, /* SCC2 TxD        */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 1,          1,   1,   1,   0,   0 }, /* SCC3 TxD        */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 1,          1,   1,   1,   0,   0 }, /* Timer1 OUT      */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { 0,          0,   0,   0,   0,   0 }, /* PC22            */
-	/* PC21 */ { 1,          1,   0,   0,   0,   0 }, /* FCC RxCLK 11    */
-	/* PC20 */ { 1,          1,   0,   0,   0,   0 }, /* FCC TxCLK 12    */
-	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19            */
-	/* PC18 */ { 0,          0,   0,   0,   0,   0 }, /* PC18            */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 1,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 1,          0,   0,   1,   0,   0 }, /* TX OUTPUT SLEW1 */
-	/* PC11 */ { 1,          0,   0,   1,   0,   0 }, /* TX OUTPUT SLEW0 */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          0,   0,   1,   0,   1 }, /* SPA_TX_EN       */
-	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8             */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5             */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4             */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RxD        */
-	/* PD30 */ { 0,          0,   0,   0,   0,   0 }, /* PD30            */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 1,          1,   0,   0,   0,   0 }, /* SCC4: RXD       */
-	/* PD21 */ { 1,          1,   0,   1,   0,   0 }, /* SCC4: TXD       */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SCL         */
-#else
-	/* PD15 */ { 1,          0,   0,   0,   1,   1 }, /* PD15            */
-	/* PD14 */ { 1,          0,   0,   1,   1,   1 }, /* PD14            */
-#endif
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 TxD        */
-	/* PD8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 RxD        */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
-	sdmr_ptr = &memctl->memc_psdmr;
-	orx_ptr = &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size ((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	long psize;
-	long sizelittle, sizebig;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	/* 60x SDRAM setup:
-	 */
-	sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	if (sizelittle < sizebig) {
-		psize = sizebig;
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	}
-
-	icache_enable ();
-
-	return (psize);
-}
-
-int checkboard (void)
-{
-	puts ("Board: MUAS3001\n");
-
-	return 0;
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r (void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * update "memory" property in the blob
- */
-void ft_blob_update (void *blob, bd_t *bd)
-{
-	int ret, nodeoffset = 0;
-	ulong flash_data[4] = {0};
-	ulong	speed = 0;
-
-	/* update Flash addr, size */
-	flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
-	flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
-	nodeoffset = fdt_path_offset (blob, "/localbus");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
-					sizeof (flash_data));
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	} else {
-		/* memory node is required in dts */
-		printf ("ft_blob_update(): cannot find /localbus node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
-
-	/* baudrate */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
-	if (nodeoffset >= 0) {
-		speed = cpu_to_be32 (gd->baudrate);
-		ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
-					sizeof (unsigned long));
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
-			"property err:%s\n", fdt_strerror (ret));
-	} else {
-		/* baudrate is required in dts */
-		printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup (blob, bd);
-	ft_blob_update (blob, bd);
-
-	return 0;
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */