Kconfig: Remove all default n/no options

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>

9 files changed, 0 insertions, 18 deletions

diff --git a/board/beacon/imx8mn/Kconfig b/board/beacon/imx8mn/Kconfig
index dceb3de..65d2923 100644
--- a/board/beacon/imx8mn/Kconfig
+++ b/board/beacon/imx8mn/Kconfig
@@ -11,11 +11,9 @@ config SYS_CONFIG_NAME
 
 config IMX8MN_FORCE_NOM_SOC
 	bool "Force to use nominal mode for SOC and ARM"
-	default n
 
 config IMX8MN_BEACON_2GB_LPDDR
 	bool "Enable 2GB LPDDR"
-	default n
 
 config IMX_CONFIG
 	default "arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg"
diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig
index 5c205bd..d4a238d 100644
--- a/board/congatec/common/Kconfig
+++ b/board/congatec/common/Kconfig
@@ -28,7 +28,6 @@ endif
 config VOL_MONITOR_LTC3882_READ
 	depends on VID
 	bool "Enable the LTC3882 voltage monitor read"
-	default n
 	help
 	 This option enables LTC3882 voltage monitor read
 	 functionality. It is used by common VID driver.
@@ -36,13 +35,11 @@ config VOL_MONITOR_LTC3882_READ
 config VOL_MONITOR_LTC3882_SET
 	depends on VID
 	bool "Enable the LTC3882 voltage monitor set"
-	default n
 	help
 	 This option enables LTC3882 voltage monitor set
 	 functionality. It is used by common VID driver.
 
 config USB_TCPC
 	bool "USB Typec port controller simple driver"
-	default n
 	help
 	  Enable USB type-c port controller (TCPC) driver
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index ab9c14a..1e3bb42 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -23,7 +23,6 @@ config CMD_ESBC_VALIDATE
 
 config FSL_USE_PCA9547_MUX
 	bool "Enable PCA9547 I2C Mux on Freescale boards"
-	default n
 	help
 	 This option enables the PCA9547 I2C mux on Freescale boards.
 
diff --git a/board/freescale/imx8mn_evk/Kconfig b/board/freescale/imx8mn_evk/Kconfig
index eb37630..0adf87b 100644
--- a/board/freescale/imx8mn_evk/Kconfig
+++ b/board/freescale/imx8mn_evk/Kconfig
@@ -11,7 +11,6 @@ config SYS_CONFIG_NAME
 
 config IMX8MN_LOW_DRIVE_MODE
 	bool "Enable the low drive mode of iMX8MN on EVK board"
-	default n
 
 config IMX_CONFIG
 	default "board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg"
diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig
index ca22c92..4093981 100644
--- a/board/freescale/ls1028a/Kconfig
+++ b/board/freescale/ls1028a/Kconfig
@@ -14,7 +14,6 @@ config SYS_CONFIG_NAME
 
 config EMMC_BOOT
 	bool "Support for booting from EMMC"
-	default n
 
 config SYS_TEXT_BASE
 	default 0x96000000 if SD_BOOT || EMMC_BOOT
@@ -53,7 +52,6 @@ config SYS_CONFIG_NAME
 
 config EMMC_BOOT
 	bool "Support for booting from EMMC"
-	default n
 
 config SYS_TEXT_BASE
 	default 0x96000000 if SD_BOOT || EMMC_BOOT
diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 3d9e295..778b8d8 100644
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -16,7 +16,6 @@ config SYS_CONFIG_NAME
 config SYS_HAS_ARMV8_SECURE_BASE
 	bool "Enable secure address for PSCI image"
 	depends on ARMV8_PSCI
-	default n
 	help
 	  PSCI image can be re-located to secure RAM.
 	  If enabled, please also define the value for ARMV8_SECURE_BASE,
diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig
index 8249c5d..d4c061a 100644
--- a/board/freescale/t208xrdb/Kconfig
+++ b/board/freescale/t208xrdb/Kconfig
@@ -11,7 +11,6 @@ config SYS_CONFIG_NAME
 
 config T2080RDB_REV_D
 	bool "Support for T2080RDB revisions D and up"
-	default n
 
 source "board/freescale/common/Kconfig"
 
diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig
index 6f55cfa..c52b365 100644
--- a/board/keymile/km_arm/Kconfig
+++ b/board/keymile/km_arm/Kconfig
@@ -3,37 +3,31 @@ menu "KM ARM Options"
 
 config KM_FPGA_CONFIG
 	bool "FPGA Configuration"
-	default n
 	help
 	  Include capability to change FPGA configuration.
 
 config KM_FPGA_FORCE_CONFIG
 	bool "FPGA reconfiguration"
-	default n
 	help
 	  If yes we force to reconfigure the FPGA always
 
 config KM_FPGA_NO_RESET
 	bool "FPGA skip reset"
-	default n
 	help
 	  If yes we skip triggering a reset of the FPGA
 
 config KM_ENV_IS_IN_SPI_NOR
 	bool "Environment in SPI NOR"
-	default n
 	help
 	  Put the U-Boot environment in the SPI NOR flash.
 
 config KM_PIGGY4_88E6061
 	bool "Piggy via Switch 88E6061"
-	default n
 	help
 	  The Piggy4 board is connected via a Marvell 88E6061 switch.
 
 config KM_PIGGY4_88E6352
 	bool "Piggy via Switch 88E6352"
-	default n
 	help
 	  The Piggy4 board is connected via a Marvell 88E6352 switch.
 
diff --git a/board/toradex/apalis_imx6/Kconfig b/board/toradex/apalis_imx6/Kconfig
index 14f8c10..c6ff387 100644
--- a/board/toradex/apalis_imx6/Kconfig
+++ b/board/toradex/apalis_imx6/Kconfig
@@ -48,7 +48,6 @@ config TDX_APALIS_IMX6_V1_0
 	    This option configures DCE mode unconditionally. Whithout this
 	    option the config block stating V1.0 HW selects DCE mode,
 	    otherwise the UARTs are configuered in DTE mode.
-	default n
 
 source "board/toradex/common/Kconfig"