diff options
author | Pali Rohár <pali@kernel.org> | 2022-11-02 18:51:28 +0100 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2022-11-07 07:17:55 +0100 |
commit | 87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1 (patch) | |
tree | 214b5ae758e50c7733b1b65d41f3819d67aaa17d /board | |
parent | 497db3ad89d6bc257519961cb89aa7dcda30a045 (diff) | |
download | u-boot-87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1.zip u-boot-87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1.tar.gz u-boot-87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1.tar.bz2 |
Makefile: Rename u-boot-spl.kwb to u-boot-with-spl.kwb
File name with pattern u-boot-spl* is used on all places except in kwb
image for binary with SPL-only code. Combined binary with both SPL and
proper U-Boot in other places has file name pattern u-boot-with-spl*.
Make it consistent also for kwb image and rename u-boot-spl.kwb to
u-boot-with-spl.kwb as this image contains both SPL and proper U-Boot code.
Also update documentation about file name changes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board')
-rw-r--r-- | board/Marvell/db-88f6820-gp/README | 6 | ||||
-rw-r--r-- | board/kobol/helios4/README | 6 | ||||
-rw-r--r-- | board/solidrun/clearfog/README | 8 |
3 files changed, 10 insertions, 10 deletions
diff --git a/board/Marvell/db-88f6820-gp/README b/board/Marvell/db-88f6820-gp/README index 9bea5b3..b4db6ed 100644 --- a/board/Marvell/db-88f6820-gp/README +++ b/board/Marvell/db-88f6820-gp/README @@ -2,17 +2,17 @@ Update from original Marvell U-Boot to mainline U-Boot: ------------------------------------------------------- The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". To update the SPI NOR flash, please use the following command: -=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-with-spl.kwb;\ sf update 2000000 0 60000 Note that the original Marvell U-Boot seems to have problems with the "sf update" command. This does not work reliable. So here this command should be used: -=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-with-spl.kwb;\ sf erase 0 60000;sf write 2000000 0 60000 diff --git a/board/kobol/helios4/README b/board/kobol/helios4/README index 749f048..d615cdd 100644 --- a/board/kobol/helios4/README +++ b/board/kobol/helios4/README @@ -7,12 +7,12 @@ $ make helios4_defconfig $ make The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". Now all you need to do is copy this image on a SD card. For example with this command: -$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 +$ sudo dd if=u-boot-with-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! @@ -38,7 +38,7 @@ Set the SW1 DIP switches to UART boot (see above). Run the following command to initiate U-Boot download: - ./tools/kwboot -p -b u-boot-spl.kwb /dev/ttyUSBX + ./tools/kwboot -p -b u-boot-with-spl.kwb /dev/ttyUSBX Use the correct UART device node for /dev/ttyUSBX. diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 9375be8..ed4a712 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -7,12 +7,12 @@ $ make clearfog_defconfig $ make The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". Now all you need to do is copy this image on a SD card. For example with this command: -$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 +$ sudo dd if=u-boot-with-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! @@ -29,7 +29,7 @@ command: Install U-Boot on eMMC boot partition from Linux running on Clearfog: echo 0 > /sys/block/mmcblk0boot0/force_ro - dd if=u-boot-spl.kwb of=/dev/mmcblk0boot0 + dd if=u-boot-with-spl.kwb of=/dev/mmcblk0boot0 Note that the SD card is not accessible when the Clearfog SOM has eMMC. Consider initial boot from UART (see below). @@ -66,7 +66,7 @@ Set the SW1 DIP switches to UART boot (see above). Run the following command to initiate U-Boot download: - ./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX + ./tools/kwboot -b u-boot-with-spl.kwb /dev/ttyUSBX Use the correct UART device node for /dev/ttyUSBX. |