riscv: Add Microchip MPFS Icicle Kit support

This patch adds Microchip MPFS Icicle Kit support. For now, only
NS16550 Serial, Microchip clock, Cadence eMMC and MACB drivers are
enabled. The Microchip MPFS Icicle defconfig by default builds
U-Boot for S-Mode because U-Boot on Microchip PolarFire SoC will run
in S-Mode as payload of HSS + OpenSBI.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>

2 files changed, 119 insertions, 3 deletions

diff --git a/board/microchip/mpfs_icicle/Kconfig b/board/microchip/mpfs_icicle/Kconfig
index bf8e1a1..4678462 100644
--- a/board/microchip/mpfs_icicle/Kconfig
+++ b/board/microchip/mpfs_icicle/Kconfig
@@ -20,7 +20,30 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select GENERIC_RISCV
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 	imply SMP
+	imply CLK_CCF
+	imply CLK_MPFS
 	imply SYS_NS16550
+	imply CMD_DHCP
+	imply CMD_EXT2
+	imply CMD_EXT4
+	imply CMD_FAT
+	imply CMD_FS_GENERIC
+	imply CMD_NET
+	imply CMD_PING
+	imply CMD_MMC
+	imply DOS_PARTITION
+	imply EFI_PARTITION
+	imply IP_DYN
+	imply ISO_PARTITION
+	imply MACB
+	imply MII
+	imply PHY_LIB
+	imply PHY_VITESSE
+	imply MMC
+	imply MMC_WRITE
+	imply MMC_SDHCI
+	imply MMC_SDHCI_CADENCE
 
 endif
diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c
index 8381361..0e34409 100644
--- a/board/microchip/mpfs_icicle/mpfs_icicle.c
+++ b/board/microchip/mpfs_icicle/mpfs_icicle.c
@@ -6,10 +6,49 @@
 
 #include <common.h>
 #include <dm.h>
+#include <env.h>
 #include <init.h>
 #include <asm/io.h>
 
-#define MPFS_SYSREG_SOFT_RESET	((unsigned int *)0x20002088)
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MPFS_SYSREG_SOFT_RESET		((unsigned int *)0x20002088)
+#define MPFS_SYS_SERVICE_CR		((unsigned int *)0x37020050)
+#define MPFS_SYS_SERVICE_SR		((unsigned int *)0x37020054)
+#define MPFS_SYS_SERVICE_MAILBOX	((unsigned char *)0x37020800)
+
+#define PERIPH_RESET_VALUE		0x1e8u
+#define SERVICE_CR_REQ			0x1u
+#define SERVICE_SR_BUSY			0x2u
+
+static void read_device_serial_number(u8 *response, u8 response_size)
+{
+	u8 idx;
+	u8 *response_buf;
+	unsigned int val;
+
+	response_buf = (u8 *)response;
+
+	writel(SERVICE_CR_REQ, MPFS_SYS_SERVICE_CR);
+	/*
+	 * REQ bit will remain set till the system controller starts
+	 * processing.
+	 */
+	do {
+		val = readl(MPFS_SYS_SERVICE_CR);
+	} while (SERVICE_CR_REQ == (val & SERVICE_CR_REQ));
+
+	/*
+	 * Once system controller starts processing the busy bit will
+	 * go high and service is completed when busy bit is gone low
+	 */
+	do {
+		val = readl(MPFS_SYS_SERVICE_SR);
+	} while (SERVICE_SR_BUSY == (val & SERVICE_SR_BUSY));
+
+	for (idx = 0; idx < response_size; idx++)
+		response_buf[idx] = readb(MPFS_SYS_SERVICE_MAILBOX + idx);
+}
 
 int board_init(void)
 {
@@ -22,10 +61,64 @@ int board_early_init_f(void)
 {
 	unsigned int val;
 
-	/* Reset uart peripheral */
+	/* Reset uart, mmc peripheral */
 	val = readl(MPFS_SYSREG_SOFT_RESET);
-	val = (val & ~(1u << 5u));
+	val = (val & ~(PERIPH_RESET_VALUE));
 	writel(val, MPFS_SYSREG_SOFT_RESET);
 
 	return 0;
 }
+
+int board_late_init(void)
+{
+	u32 ret;
+	u32 node;
+	u8 idx;
+	u8 device_serial_number[16] = { 0 };
+	unsigned char mac_addr[6];
+	char icicle_mac_addr[20];
+	void *blob = (void *)gd->fdt_blob;
+
+	node = fdt_path_offset(blob, "ethernet0");
+	if (node < 0) {
+		printf("No ethernet0 path offset\n");
+		return -ENODEV;
+	}
+
+	ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6);
+	if (ret) {
+		printf("No local-mac-address property\n");
+		return -EINVAL;
+	}
+
+	read_device_serial_number(device_serial_number, 16);
+
+	/* Update MAC address with device serial number */
+	mac_addr[0] = 0x00;
+	mac_addr[1] = 0x04;
+	mac_addr[2] = 0xA3;
+	mac_addr[3] = device_serial_number[2];
+	mac_addr[4] = device_serial_number[1];
+	mac_addr[5] = device_serial_number[0];
+
+	ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
+	if (ret) {
+		printf("Error setting local-mac-address property\n");
+		return -ENODEV;
+	}
+
+	icicle_mac_addr[0] = '[';
+
+	sprintf(&icicle_mac_addr[1], "%pM", mac_addr);
+
+	icicle_mac_addr[18] = ']';
+	icicle_mac_addr[19] = '\0';
+
+	for (idx = 0; idx < 20; idx++) {
+		if (icicle_mac_addr[idx] == ':')
+			icicle_mac_addr[idx] = ' ';
+	}
+	env_set("icicle_mac_addr", icicle_mac_addr);
+
+	return 0;
+}