dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO

Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

5 files changed, 14 insertions, 14 deletions

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 2cd0a12..bc1657e 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -77,7 +77,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 void do_board_detect(void)
 {
 	enable_i2c0_pin_mux();
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 	if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
@@ -336,7 +336,7 @@ static void scale_vcores_bone(int freq)
 	if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4))
 		return;
 
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	if (i2c_probe(TPS65217_CHIP_PM))
 		return;
 #else
@@ -435,7 +435,7 @@ void scale_vcores_generic(int freq)
 	 * 1.10V.  For MPU voltage we need to switch based on
 	 * the frequency we are running at.
 	 */
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	if (i2c_probe(TPS65910_CTRL_I2C_ADDR))
 		return;
 #else
@@ -469,7 +469,7 @@ void gpi2c_init(void)
 
 	if (first_time) {
 		enable_i2c0_pin_mux();
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
 			 CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 6fb2c00..03adcd2 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -333,7 +333,7 @@ static unsigned short detect_daughter_board_profile(void)
 {
 	unsigned short val;
 
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	if (i2c_probe(I2C_CPLD_ADDR))
 		return PROFILE_NONE;
 
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index ac0d792..e9febb9 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -393,7 +393,7 @@ void scale_vcores_generic(u32 m)
 {
 	int mpu_vdd, ddr_volt;
 
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	if (i2c_probe(TPS65218_CHIP_PM))
 		return;
 #else
@@ -451,7 +451,7 @@ void scale_vcores_idk(u32 m)
 {
 	int mpu_vdd;
 
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	if (i2c_probe(TPS62362_I2C_ADDR))
 		return;
 #else
@@ -492,7 +492,7 @@ void gpi2c_init(void)
 
 	if (first_time) {
 		enable_i2c0_pin_mux();
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
 			 CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
@@ -632,14 +632,14 @@ void sdram_init(void)
 int power_init_board(void)
 {
 	int rc;
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	struct pmic *p = NULL;
 #endif
 	if (board_is_idk()) {
 		rc = power_tps62362_init(0);
 		if (rc)
 			goto done;
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 		p = pmic_get("TPS62362");
 		if (!p || pmic_probe(p))
 			goto done;
@@ -649,7 +649,7 @@ int power_init_board(void)
 		rc = power_tps65218_init(0);
 		if (rc)
 			goto done;
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 		p = pmic_get("TPS65218_PMIC");
 		if (!p || pmic_probe(p))
 			goto done;
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 8b3b4bc..de92eb0 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -22,7 +22,7 @@
 
 #include "board_detect.h"
 
-#if !defined(CONFIG_DM_I2C)
+#if !CONFIG_IS_ENABLED(DM_I2C)
 /**
  * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
  * @i2c_bus: i2c bus number to initialize
@@ -89,7 +89,7 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 	u32 hdr_read;
 	int rc;
 
-#if defined(CONFIG_DM_I2C)
+#if CONFIG_IS_ENABLED(DM_I2C)
 	struct udevice *dev;
 	struct udevice *bus;
 
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 2be86d6..5229afa 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -259,7 +259,7 @@ int board_fit_config_name_match(const char *name)
 #if defined(CONFIG_DTB_RESELECT)
 static int k2g_alt_board_detect(void)
 {
-#ifndef CONFIG_DM_I2C
+#if !CONFIG_IS_ENABLED(DM_I2C)
 	int rc;
 
 	rc = i2c_set_bus_num(1);