diff options
author | Anatolij Gustschin <agust@denx.de> | 2020-01-07 16:37:42 +0100 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2020-01-14 22:15:21 +0100 |
commit | 7b5b9343139f934f1ce876e9466c065f20c8265c (patch) | |
tree | 4c6636057130713042fb73191aebf4ce5104a07e /board/siemens | |
parent | 88366b96ee0d8640b2af53e4026dbaeed0fab5e0 (diff) | |
download | u-boot-7b5b9343139f934f1ce876e9466c065f20c8265c.zip u-boot-7b5b9343139f934f1ce876e9466c065f20c8265c.tar.gz u-boot-7b5b9343139f934f1ce876e9466c065f20c8265c.tar.bz2 |
imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.
Supported interfaces: GPIO, ENET, eMMC, I2C, UART.
Console output:
U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
Trying to boot from MMC1
Load image from MMC/SD 0x3e400
U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
Model: Siemens Giedi
Board: Capricorn
Boot: MMC0
DRAM: 1022 MiB
MMC: FSL_SDHC: 0
Loading Environment from MMC... OK
In: serial@5a080000
Out: serial@5a080000
Err: serial@5a080000
Net: eth1: ethernet@5b050000 [PRIME]
Autobooting in 1 seconds, press "<Esc><Esc>" to stop
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'board/siemens')
-rw-r--r-- | board/siemens/capricorn/Kconfig | 12 | ||||
-rw-r--r-- | board/siemens/capricorn/MAINTAINERS | 9 | ||||
-rw-r--r-- | board/siemens/capricorn/Makefile | 12 | ||||
-rw-r--r-- | board/siemens/capricorn/board.c | 448 | ||||
-rw-r--r-- | board/siemens/capricorn/imximage.cfg | 22 | ||||
-rw-r--r-- | board/siemens/capricorn/spl.c | 47 | ||||
-rw-r--r-- | board/siemens/capricorn/uboot-container.cfg | 13 | ||||
-rw-r--r-- | board/siemens/common/factoryset.c | 2 |
8 files changed, 565 insertions, 0 deletions
diff --git a/board/siemens/capricorn/Kconfig b/board/siemens/capricorn/Kconfig new file mode 100644 index 0000000..ed1f793 --- /dev/null +++ b/board/siemens/capricorn/Kconfig @@ -0,0 +1,12 @@ +if TARGET_GIEDI + +config SYS_BOARD + default "capricorn" + +config SYS_VENDOR + default "siemens" + +config SYS_CONFIG_NAME + default "giedi" + +endif diff --git a/board/siemens/capricorn/MAINTAINERS b/board/siemens/capricorn/MAINTAINERS new file mode 100644 index 0000000..5d81aaf --- /dev/null +++ b/board/siemens/capricorn/MAINTAINERS @@ -0,0 +1,9 @@ +CAPRICORN BOARD +M: Anatolij Gustschin <agust@denx.de> +S: Maintained +F: board/siemens/capricorn/ +F: include/configs/capricorn-common.h +F: include/configs/giedi.h +F: include/configs/siemens-ccp-common.h +F: include/configs/siemens-env-common.h +F: configs/giedi_defconfig diff --git a/board/siemens/capricorn/Makefile b/board/siemens/capricorn/Makefile new file mode 100644 index 0000000..d5846cc --- /dev/null +++ b/board/siemens/capricorn/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2019 Siemens AG +# + +obj-y += board.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +else +obj-y += ../common/factoryset.o +endif diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c new file mode 100644 index 0000000..00fd4b9 --- /dev/null +++ b/board/siemens/capricorn/board.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017-2019 NXP + * + * Copyright 2019 Siemens AG + * + */ +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <netdev.h> +#include <env_internal.h> +#include <fsl_esdhc_imx.h> +#include <i2c.h> +#include <led.h> +#include <pca953x.h> +#include <power-domain.h> +#include <asm/gpio.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/sys_proto.h> +#ifndef CONFIG_SPL +#include <asm/arch-imx8/clock.h> +#endif +#include "../common/factoryset.h" + +#define GPIO_PAD_CTRL \ + ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define ENET_NORMAL_PAD_CTRL \ + ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define UART_PAD_CTRL \ + ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart2_pads[] = { + SC_P_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +int board_early_init_f(void) +{ + /* Set UART clock root to 80 MHz */ + sc_pm_clock_rate_t rate = SC_80MHZ; + int ret; + + ret = sc_pm_setup_uart(SC_R_UART_0, rate); + ret |= sc_pm_setup_uart(SC_R_UART_2, rate); + if (ret) + return ret; + + setup_iomux_uart(); + + return 0; +} + +#define ENET_PHY_RESET IMX_GPIO_NR(0, 3) +#define ENET_TEST_1 IMX_GPIO_NR(0, 8) +#define ENET_TEST_2 IMX_GPIO_NR(0, 9) + +/*#define ETH_IO_TEST*/ +static iomux_cfg_t enet_reset[] = { + SC_P_ESAI0_SCKT | MUX_MODE_ALT(4) | MUX_PAD_CTRL(GPIO_PAD_CTRL), +#ifdef ETH_IO_TEST + /* GPIO0.IO08 MODE3: TXD0 */ + SC_P_ESAI0_TX4_RX1 | MUX_MODE_ALT(4) | + MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL), + /* GPIO0.IO09 MODE3: TXD1 */ + SC_P_ESAI0_TX5_RX0 | MUX_MODE_ALT(4) | + MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL), +#endif +}; + +static void enet_device_phy_reset(void) +{ + int ret = 0; + + imx8_iomux_setup_multiple_pads(enet_reset, ARRAY_SIZE(enet_reset)); + + ret = gpio_request(ENET_PHY_RESET, "enet_phy_reset"); + if (!ret) { + gpio_direction_output(ENET_PHY_RESET, 1); + gpio_set_value(ENET_PHY_RESET, 0); + /* SMSC9303 TRM chapter 14.5.2 */ + udelay(200); + gpio_set_value(ENET_PHY_RESET, 1); + } else { + printf("ENET RESET failed!\n"); + } + +#ifdef ETH_IO_TEST + ret = gpio_request(ENET_TEST_1, "enet_test1"); + if (!ret) { + int i; + + printf("ENET TEST 1!\n"); + for (i = 0; i < 20; i++) { + gpio_direction_output(ENET_TEST_1, 1); + gpio_set_value(ENET_TEST_1, 0); + udelay(50); + gpio_set_value(ENET_TEST_1, 1); + udelay(50); + } + gpio_free(ENET_TEST_1); + } else { + printf("GPIO for ENET TEST 1 failed!\n"); + } + ret = gpio_request(ENET_TEST_2, "enet_test2"); + if (!ret) { + int i; + + printf("ENET TEST 2!\n"); + for (i = 0; i < 20; i++) { + gpio_direction_output(ENET_TEST_2, 1); + gpio_set_value(ENET_TEST_2, 0); + udelay(50); + gpio_set_value(ENET_TEST_2, 1); + udelay(50); + } + gpio_free(ENET_TEST_2); + } else { + printf("GPIO for ENET TEST 2 failed!\n"); + } +#endif +} + +int setup_gpr_fec(void) +{ + sc_ipc_t ipc_handle = -1; + sc_err_t err = 0; + unsigned int test; + + /* + * TX_CLK_SEL: it controls a mux between clock coming from the pad 50M + * input pin and clock generated internally to connectivity subsystem + * 0: internal clock + * 1: external clock ---> your choice for RMII + * + * CLKDIV_SEL: it controls a div by 2 on the internal clock path à + * it should be don’t care when using external clock + * 0: non-divided clock + * 1: clock divided by 2 + * 50_DISABLE or 125_DISABLE: + * it’s used to disable the clock tree going outside the chip + * when reference clock is generated internally. + * It should be don’t care when reference clock is provided + * externally. + * 0: clock is enabled + * 1: clock is disabled + * + * SC_C_TXCLK = 24, + * SC_C_CLKDIV = 25, + * SC_C_DISABLE_50 = 26, + * SC_C_DISABLE_125 = 27, + */ + + err = sc_misc_set_control(ipc_handle, SC_R_ENET_1, SC_C_TXCLK, 1); + if (err != SC_ERR_NONE) + printf("Error in setting up SC_C %d\n\r", SC_C_TXCLK); + + sc_misc_get_control(ipc_handle, SC_R_ENET_1, SC_C_TXCLK, &test); + debug("TEST SC_C %d-->%d\n\r", SC_C_TXCLK, test); + + err = sc_misc_set_control(ipc_handle, SC_R_ENET_1, SC_C_CLKDIV, 0); + if (err != SC_ERR_NONE) + printf("Error in setting up SC_C %d\n\r", SC_C_CLKDIV); + + sc_misc_get_control(ipc_handle, SC_R_ENET_1, SC_C_CLKDIV, &test); + debug("TEST SC_C %d-->%d\n\r", SC_C_CLKDIV, test); + + err = sc_misc_set_control(ipc_handle, SC_R_ENET_1, SC_C_DISABLE_50, 0); + if (err != SC_ERR_NONE) + printf("Error in setting up SC_C %d\n\r", SC_C_DISABLE_50); + + sc_misc_get_control(ipc_handle, SC_R_ENET_1, SC_C_TXCLK, &test); + debug("TEST SC_C %d-->%d\n\r", SC_C_DISABLE_50, test); + + err = sc_misc_set_control(ipc_handle, SC_R_ENET_1, SC_C_DISABLE_125, 1); + if (err != SC_ERR_NONE) + printf("Error in setting up SC_C %d\n\r", SC_C_DISABLE_125); + + sc_misc_get_control(ipc_handle, SC_R_ENET_1, SC_C_TXCLK, &test); + debug("TEST SC_C %d-->%d\n\r", SC_C_DISABLE_125, test); + + err = sc_misc_set_control(ipc_handle, SC_R_ENET_1, SC_C_SEL_125, 1); + if (err != SC_ERR_NONE) + printf("Error in setting up SC_C %d\n\r", SC_C_SEL_125); + + sc_misc_get_control(ipc_handle, SC_R_ENET_1, SC_C_SEL_125, &test); + debug("TEST SC_C %d-->%d\n\r", SC_C_SEL_125, test); + + return 0; +} + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include <miiphy.h> +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +#endif + +static int setup_fec(void) +{ + setup_gpr_fec(); + /* Reset ENET PHY */ + enet_device_phy_reset(); + return 0; +} + +void reset_cpu(ulong addr) +{ +} + +#ifndef CONFIG_SPL_BUILD +/* LED's */ +static int board_led_init(void) +{ + struct udevice *bus, *dev; + u8 pca_led[2] = { 0x00, 0x00 }; + int ret; + + /* init all GPIO LED's */ + if (IS_ENABLED(CONFIG_LED)) + led_default_state(); + + /* enable all leds on PCA9552 */ + ret = uclass_get_device_by_seq(UCLASS_I2C, PCA9552_1_I2C_BUS, &bus); + if (ret) { + printf("ERROR: I2C get %d\n", ret); + return ret; + } + + ret = dm_i2c_probe(bus, PCA9552_1_I2C_ADDR, 0, &dev); + if (ret) { + printf("ERROR: PCA9552 probe failed\n"); + return ret; + } + + ret = dm_i2c_write(dev, 0x16, pca_led, sizeof(pca_led)); + if (ret) { + printf("ERROR: PCA9552 write failed\n"); + return ret; + } + + mdelay(1); + return ret; +} +#endif /* !CONFIG_SPL_BUILD */ + +int checkboard(void) +{ + puts("Board: Capricorn\n"); + + /* + * Running build_info() doesn't work with current SCFW blob. + * Uncomment below call when new blob is available. + */ + /*build_info();*/ + + print_bootinfo(); + return 0; +} + +int board_init(void) +{ + setup_fec(); + return 0; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + return 0; +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +static int check_mmc_autodetect(void) +{ + char *autodetect_str = env_get("mmcautodetect"); + + if (autodetect_str && (strcmp(autodetect_str, "yes") == 0)) + return 1; + + return 0; +} + +/* This should be defined for each board */ +__weak int mmc_map_to_kernel_blk(int dev_no) +{ + return dev_no; +} + +void board_late_mmc_env_init(void) +{ + char cmd[32]; + char mmcblk[32]; + u32 dev_no = mmc_get_env_dev(); + + if (!check_mmc_autodetect()) + return; + + env_set_ulong("mmcdev", dev_no); + + /* Set mmcblk env */ + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", + mmc_map_to_kernel_blk(dev_no)); + env_set("mmcroot", mmcblk); + + sprintf(cmd, "mmc dev %d", dev_no); + run_command(cmd, 0); +} + +#ifndef CONFIG_SPL_BUILD +int factoryset_read_eeprom(int i2c_addr); + +static int load_parameters_from_factoryset(void) +{ + int ret; + + ret = factoryset_read_eeprom(EEPROM_I2C_ADDR); + if (ret) + return ret; + + return factoryset_env_set(); +} + +int board_late_init(void) +{ + env_set("sec_boot", "no"); +#ifdef CONFIG_AHAB_BOOT + env_set("sec_boot", "yes"); +#endif + +#ifdef CONFIG_ENV_IS_IN_MMC + board_late_mmc_env_init(); +#endif + /* Init LEDs */ + if (board_led_init()) + printf("I2C LED init failed\n"); + + /* Set environment from factoryset */ + if (load_parameters_from_factoryset()) + printf("Loading factoryset parameters failed!\n"); + + return 0; +} + +/* Service button */ +#define MAX_PIN_NUMBER 128 +#define BOARD_DEFAULT_BUTTON_GPIO IMX_GPIO_NR(1, 31) + +unsigned char get_button_state(char * const envname, unsigned char def) +{ + int button = 0; + int gpio; + char *ptr_env; + + /* If button is not found we take default */ + ptr_env = env_get(envname); + if (!ptr_env) { + printf("Using default: %u\n", def); + gpio = def; + } else { + gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0); + if (gpio > MAX_PIN_NUMBER) + gpio = def; + } + + gpio_request(gpio, ""); + gpio_direction_input(gpio); + if (gpio_get_value(gpio)) + button = 1; + else + button = 0; + + gpio_free(gpio); + + return button; +} + +/* + * This command returns the status of the user button on + * Input - none + * Returns - 1 if button is held down + * 0 if button is not held down + */ +static int +do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int button = 0; + + button = get_button_state("button_usr1", BOARD_DEFAULT_BUTTON_GPIO); + + if (argc > 1) + printf("Button state: %u\n", button); + + return button; +} + +U_BOOT_CMD( + usrbutton, CONFIG_SYS_MAXARGS, 2, do_userbutton, + "Return the status of user button", + "[print]" +); + +#define ERST IMX_GPIO_NR(0, 3) + +static int +do_eth_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + gpio_request(ERST, "ERST"); + gpio_direction_output(ERST, 0); + udelay(200); + gpio_set_value(ERST, 1); + return 0; +} + +U_BOOT_CMD( + switch_rst, CONFIG_SYS_MAXARGS, 2, do_eth_reset, + "Reset eth phy", + "[print]" +); +#endif /* ! CONFIG_SPL_BUILD */ diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg new file mode 100644 index 0000000..8660e50 --- /dev/null +++ b/board/siemens/capricorn/imximage.cfg @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + * + * Refer doc/README.imx8image for more details about how-to configure + * and create imx8image boot image + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM SD 0x400 +/* SoC type IMX8QX */ +SOC_TYPE IMX8QX +/* Append seco container image */ +APPEND ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU capricorn-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 spl/u-boot-spl.bin 0x00100000 diff --git a/board/siemens/capricorn/spl.c b/board/siemens/capricorn/spl.c new file mode 100644 index 0000000..47fe86c --- /dev/null +++ b/board/siemens/capricorn/spl.c @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * Copyright 2019 Siemens AG + * + */ +#include <common.h> +#include <spl.h> +#include <dm.h> +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; + +void spl_board_init(void) +{ + struct udevice *dev; + + uclass_find_first_device(UCLASS_MISC, &dev); + + for (; dev; uclass_find_next_device(&dev)) { + if (device_probe(dev)) + continue; + } + + arch_cpu_init(); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); +} + +void board_init_f(ulong dummy) +{ + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + board_init_r(NULL, 0); +} diff --git a/board/siemens/capricorn/uboot-container.cfg b/board/siemens/capricorn/uboot-container.cfg new file mode 100644 index 0000000..8165811 --- /dev/null +++ b/board/siemens/capricorn/uboot-container.cfg @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#define __ASSEMBLY__ + +/* This file is to create a container image could be loaded by SPL */ +BOOT_FROM SD 0x400 +SOC_TYPE IMX8QX +CONTAINER +IMAGE A35 bl31.bin 0x80000000 +IMAGE A35 u-boot.bin CONFIG_SYS_TEXT_BASE diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index 7715ddf..0d3701c 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -13,7 +13,9 @@ #include <env_internal.h> #include <i2c.h> #include <asm/io.h> +#if !CONFIG_IS_ENABLED(TARGET_GIEDI) && !CONFIG_IS_ENABLED(TARGET_DENEB) #include <asm/arch/cpu.h> +#endif #include <asm/arch/sys_proto.h> #include <asm/unaligned.h> #include <net.h> |