ppc4xx: Update lwmon5 board

- Add optional ECC generation routine to preserve existing
  RAM values. This is needed for the Linux log-buffer support
- Add optional DDR2 setup with CL=4
- GPIO50 not used anymore
- Lime register setup added

Signed-off-by: Stefan Roese <sr@denx.de>

2 files changed, 73 insertions, 8 deletions

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index d5b8f8c..d916284 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -19,9 +19,10 @@
  */
 
 #include <common.h>
-#include <asm/processor.h>
 #include <ppc440.h>
+#include <asm/processor.h>
 #include <asm/gpio.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -220,6 +221,13 @@ int misc_init_r(void)
 	udelay(500);
 	gpio_write_bit(CFG_GPIO_LIME_RST, 1);
 
+	/* Lime memory clock adjusted to 133MHz */
+	out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ);
+	/* Wait untill time expired. Because of requirements in lime manual */
+	udelay(300);
+	/* Write lime controller memory parameters */
+	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
+
 	/*
 	 * Reset PHY's
 	 */
@@ -229,13 +237,6 @@ int misc_init_r(void)
 	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
 	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
 
-	/*
-	 * Reset USB hub
-	 */
-	gpio_write_bit(CFG_GPIO_HUB_RST, 0);
-	udelay(100);
-	gpio_write_bit(CFG_GPIO_HUB_RST, 1);
-
 	return 0;
 }
 
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 85811ad..9a4a8ee 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -474,8 +474,27 @@ static void program_ecc(u32 start_address,
 		blank_string(strlen(str));
 	} else {
 		/* ECC bit set method for cached memory */
+#if 1 /* test-only: will remove this define later, when ECC problems are solved! */
+		/*
+		 * Some boards (like lwmon5) need to preserve the memory
+		 * content upon ECC generation (for the log-buffer).
+		 * Therefore we don't fill the memory with a pattern or
+		 * just zero it, but write the same values back that are
+		 * already in the memory cells.
+		 */
+		address_increment = CFG_CACHELINE_SIZE;
+		end_address = current_address + num_bytes;
+
+		current_address = start_address;
+		while (current_address < end_address) {
+			ppcDcbi(current_address);
+			ppcDcbf(current_address);
+			current_address += CFG_CACHELINE_SIZE;
+		}
+#else
 		dcbz_area(start_address, num_bytes);
 		dflush();
+#endif
 	}
 
 	sync();
@@ -518,6 +537,8 @@ long int initdram (int board_type)
 {
 	u32 val;
 
+#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
+	/* CL=3 */
 	mtsdram(DDR0_02, 0x00000000);
 
 	mtsdram(DDR0_00, 0x0000190A);
@@ -558,6 +579,49 @@ long int initdram (int board_type)
 	mtsdram(DDR0_43, 0x030A0200);
 	mtsdram(DDR0_44, 0x00000003);
 	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#else
+	/* CL=4 */
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
+
+	mtsdram(DDR0_04, 0x0B030300);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0003C812);
+	mtsdram(DDR0_07, 0x00090100);
+	mtsdram(DDR0_08, 0x03c80001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x000CC800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x1e000000);
+	mtsdram(DDR0_18, 0x1e1e1e1e);
+	mtsdram(DDR0_19, 0x1e1e1e1e);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+	mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC       */
+#else
+	mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+	mtsdram(DDR0_23, 0x01000000);
+	mtsdram(DDR0_24, 0x01010001);
+
+	mtsdram(DDR0_26, 0x2D93028A);
+	mtsdram(DDR0_27, 0x0784682B);
+
+	mtsdram(DDR0_28, 0x00000080);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000008);
+
+	mtsdram(DDR0_43, 0x050A0200);
+	mtsdram(DDR0_44, 0x00000005);
+	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#endif
 
 	wait_for_dlllock();