diff options
author | wdenk <wdenk> | 2002-08-30 11:07:04 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2002-08-30 11:07:04 +0000 |
commit | 153d511e36917ee67d52d36d5d5e9ca41406610a (patch) | |
tree | c82d3d0c6501ea007d748a295e210e9be81cc248 /board/esd | |
parent | b6a6460b7dfa1629ecf187c2091737c0ed2585bf (diff) | |
download | u-boot-153d511e36917ee67d52d36d5d5e9ca41406610a.zip u-boot-153d511e36917ee67d52d36d5d5e9ca41406610a.tar.gz u-boot-153d511e36917ee67d52d36d5d5e9ca41406610a.tar.bz2 |
Initial revision
Diffstat (limited to 'board/esd')
-rw-r--r-- | board/esd/ar405/ar405.c | 187 | ||||
-rw-r--r-- | board/esd/canbt/canbt.c | 199 | ||||
-rw-r--r-- | board/esd/du405/du405.c | 200 |
3 files changed, 586 insertions, 0 deletions
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c new file mode 100644 index 0000000..f23b822 --- /dev/null +++ b/board/esd/ar405/ar405.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2001 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "ar405.h" +#include <asm/processor.h> +#include <command.h> +#include <cmd_boot.h> + + +/* ------------------------------------------------------------------------- */ + +#if 0 +#define FPGA_DEBUG +#endif + +/* fpga configuration data - generated by bin2cc */ +const unsigned char fpgadata[] = { +#include "fpgadata.c" +}; + +/* + * include common fpga code (for esd boards) + */ +#include "../common/fpga.c" + + +int board_pre_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + int index, len, i; + int status; + +#ifdef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + + /* + * Boot onboard FPGA + */ + status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); + if (status != 0) { + /* booting FPGA failed */ +#ifndef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + printf ("\nFPGA: Booting failed "); + switch (status) { + case ERROR_FPGA_PRG_INIT_LOW: + printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_INIT_HIGH: + printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_DONE: + printf ("(Timeout: DONE not high after programming FPGA)\n "); + break; + } + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("FPGA: %s\n", &(fpgadata[index + 1])); + index += len + 3; + } + putc ('\n'); + /* delayed reboot */ + for (i = 20; i > 0; i--) { + printf ("Rebooting in %2d seconds \r", i); + for (index = 0; index < 1000; index++) + udelay (1000); + } + putc ('\n'); + do_reset (NULL, 0, 0, NULL); + } + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive + * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive + * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive + * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive + * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive + * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive + */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + *(ushort *) 0xf03000ec = 0x0fff; /* enable all interrupts in fpga */ + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + int index; + int len; + unsigned char str[64]; + int i = getenv_r ("serial#", str, sizeof (str)); + + puts ("Board: "); + + if (!i || strncmp (str, "AR405", 5)) { + puts ("### No HW ID - assuming AR405\n"); + return (0); + } + + puts (str); + + puts ("\nFPGA: "); + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("%s ", &(fpgadata[index + 1])); + index += len + 3; + } + + putc ('\n'); + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + return (16 * 1024 * 1024); +} + +/* ------------------------------------------------------------------------- */ + +int testdram (void) +{ + /* TODO: XXX XXX XXX */ + printf ("test: 16 MB - ok\n"); + + return (0); +} + +/* ------------------------------------------------------------------------- */ diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c new file mode 100644 index 0000000..bc7f0c7 --- /dev/null +++ b/board/esd/canbt/canbt.c @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2001 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "canbt.h" +#include <asm/processor.h> +#include <command.h> +#include <cmd_boot.h> + +/* ------------------------------------------------------------------------- */ + +#if 0 +#define FPGA_DEBUG +#endif + +/* fpga configuration data */ +const unsigned char fpgadata[] = { +#include "fpgadata.c" +}; + +/* + * include common fpga code (for esd boards) + */ +#include "../common/fpga.c" + + +int board_pre_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned long cntrl0Reg; + int index, len, i; + int status; + + /* + * Setup GPIO pins + */ + cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff; + cntrl0Reg |= 0x0070f000; + mtdcr (cntrl0, cntrl0Reg); + +#ifdef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + + /* + * Boot onboard FPGA + */ + status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); + if (status != 0) { + /* booting FPGA failed */ +#ifndef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + printf ("\nFPGA: Booting failed "); + switch (status) { + case ERROR_FPGA_PRG_INIT_LOW: + printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_INIT_HIGH: + printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_DONE: + printf ("(Timeout: DONE not high after programming FPGA)\n "); + break; + } + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("FPGA: %s\n", &(fpgadata[index + 1])); + index += len + 3; + } + putc ('\n'); + /* delayed reboot */ + for (i = 20; i > 0; i--) { + printf ("Rebooting in %2d seconds \r", i); + for (index = 0; index < 1000; index++) + udelay (1000); + } + putc ('\n'); + do_reset (NULL, 0, 0, NULL); + } + + /* + * Setup port pins for normal operation + */ + out32 (IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32 (IBM405GP_GPIO0_TCR, 0x07038100); /* setup for output */ + out32 (IBM405GP_GPIO0_OR, 0x07030100); /* set output pins to high (default) */ + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive + * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive + * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive + * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive + * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive + * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive + */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + int index; + int len; + unsigned char str[64]; + int i = getenv_r ("serial#", str, sizeof (str)); + + puts ("Board: "); + + if (!i || strncmp (str, "CANBT", 5)) { + puts ("### No HW ID - assuming CANBT\n"); + return (0); + } + + puts (str); + + puts ("\nFPGA: "); + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("%s ", &(fpgadata[index + 1])); + index += len + 3; + } + + putc ('\n'); + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + return (16 * 1024 * 1024); +} + +/* ------------------------------------------------------------------------- */ + +int testdram (void) +{ + /* TODO: XXX XXX XXX */ + printf ("test: 16 MB - ok\n"); + + return (0); +} + +/* ------------------------------------------------------------------------- */ diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c new file mode 100644 index 0000000..184cda8 --- /dev/null +++ b/board/esd/du405/du405.c @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2000, 2001 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "du405.h" +#include <asm/processor.h> +#include <ppc4xx.h> +#include <405gp_i2c.h> +#include <command.h> +#include <cmd_boot.h> + +/* ------------------------------------------------------------------------- */ + +#if 0 +#define FPGA_DEBUG +#endif + +#if 0 +#define FPGA_DEBUG2 +#endif + +/* fpga configuration data - generated by bin2cc */ +const unsigned char fpgadata[] = { +#include "fpgadata.c" +}; + +/* + * include common fpga code (for esd boards) + */ +#include "../common/fpga.c" + + +int board_pre_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + int index, len, i; + int status; + +#ifdef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + + /* + * Boot onboard FPGA + */ + status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); + if (status != 0) { + /* booting FPGA failed */ +#ifndef FPGA_DEBUG + /* set up serial port with default baudrate */ + (void) get_clocks (); + gd->baudrate = CONFIG_BAUDRATE; + serial_init (); + console_init_f (); +#endif + printf ("\nFPGA: Booting failed "); + switch (status) { + case ERROR_FPGA_PRG_INIT_LOW: + printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_INIT_HIGH: + printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_DONE: + printf ("(Timeout: DONE not high after programming FPGA)\n "); + break; + } + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("FPGA: %s\n", &(fpgadata[index + 1])); + index += len + 3; + } + putc ('\n'); + /* delayed reboot */ + for (i = 20; i > 0; i--) { + printf ("Rebooting in %2d seconds \r", i); + for (index = 0; index < 1000; index++) + udelay (1000); + } + putc ('\n'); + do_reset (NULL, 0, 0, NULL); + } + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive + * IRQ 26 (EXT IRQ 1) DUART_A; active high; level sensitive + * IRQ 27 (EXT IRQ 2) DUART_B; active high; level sensitive + * IRQ 28 (EXT IRQ 3) unused; active low; level sensitive + * IRQ 29 (EXT IRQ 4) unused; active low; level sensitive + * IRQ 30 (EXT IRQ 5) unused; active low; level sensitive + * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive + */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFFB1); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + /* + * EBC Configuration Register: set ready timeout to 100 us + */ + mtebc (epcr, 0xb8400000); + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + int index; + int len; + unsigned char str[64]; + int i = getenv_r ("serial#", str, sizeof (str)); + + puts ("Board: "); + + if (i == -1) { + puts ("### No HW ID - assuming DU405"); + } else { + puts (str); + } + + puts ("\nFPGA: "); + + /* display infos on fpgaimage */ + index = 15; + for (i = 0; i < 4; i++) { + len = fpgadata[index]; + printf ("%s ", &(fpgadata[index + 1])); + index += len + 3; + } + + putc ('\n'); + + /* + * Reset external DUART via FPGA + */ + *(volatile unsigned char *) FPGA_MODE_REG = 0xff; /* reset high active */ + *(volatile unsigned char *) FPGA_MODE_REG = 0x00; /* low again */ + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + return (16 * 1024 * 1024); +} + +/* ------------------------------------------------------------------------- */ + +int testdram (void) +{ + /* TODO: XXX XXX XXX */ + printf ("test: 16 MB - ok\n"); + + return (0); +} + +/* ------------------------------------------------------------------------- */ |