Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.10

Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default

ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform

Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board

mmc:
- minor GD pointer removal

net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver

spi:
- Cleanup global macros for xilinx spi drivers

firmware:
- Add support for pmufw reloading

fpga:
- Improve error status reporting

common:
- Remove 4kB addition space for FDT allocation

5 files changed, 4 insertions, 439 deletions

diff --git a/board/amlogic/p212/MAINTAINERS b/board/amlogic/p212/MAINTAINERS
index 8848df0..cae6994 100644
--- a/board/amlogic/p212/MAINTAINERS
+++ b/board/amlogic/p212/MAINTAINERS
@@ -8,3 +8,7 @@ F:	configs/khadas-vim_defconfig
 F:	configs/libretech-ac_defconfig
 F:	configs/libretech-cc_defconfig
 F:	configs/p212_defconfig
+F:	doc/board/amlogic/p212.rst
+F:	doc/board/amlogic/libretech-ac.rst
+F:	doc/board/amlogic/libretech-cc.rst
+F:	doc/board/amlogic/khadas-vim.rst
diff --git a/board/amlogic/p212/README.khadas-vim b/board/amlogic/p212/README.khadas-vim
deleted file mode 100644
index ccf9338..0000000
--- a/board/amlogic/p212/README.khadas-vim
+++ /dev/null
@@ -1,101 +0,0 @@
-U-Boot for Khadas VIM
-=======================
-
-Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion
-Technology Co., Ltd with the following specifications:
-
- - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - 10/100 Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
- - 8GB/16GBeMMC
- - microSD
- - SDIO Wifi Module, Bluetooth
- - Two channels IR receiver
-
-Currently the u-boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - USB Host
- - ADC
-
-U-Boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make khadas-vim_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot
- > cd vim-u-boot
- > make kvim_defconfig
- > make CROSS_COMPILE=aarch64-none-elf-
- > export FIPDIR=$PWD/fip
-
-Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > cp $FIPDIR/gxl/bl2.bin fip/
- > cp $FIPDIR/gxl/acs.bin fip/
- > cp $FIPDIR/gxl/bl21.bin fip/
- > cp $FIPDIR/gxl/bl30.bin fip/
- > cp $FIPDIR/gxl/bl301.bin fip/
- > cp $FIPDIR/gxl/bl31.img fip/
- > cp u-boot.bin fip/bl33.bin
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl2_acs.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/bl21.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
- > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/p212/README.libretech-ac b/board/amlogic/p212/README.libretech-ac
deleted file mode 100644
index 3f713ec..0000000
--- a/board/amlogic/p212/README.libretech-ac
+++ /dev/null
@@ -1,102 +0,0 @@
-U-Boot for LibreTech AC
-=======================
-
-LibreTech AC is a single board computer manufactured by Libre Technology
-with the following specifications:
-
- - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz
- - ARM Mali 450 GPU
- - 512MiB DDR4 SDRAM
- - 10/100 Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 2.0 Host
- - eMMC, SPI NOR Flash
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the U-Boot port supports the following devices:
- - serial
- - eMMC
- - Ethernet
- - USB
-
-U-Boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make libretech-ac_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot
- > cd amlogic-u-boot
- > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh
- > make libretech_ac_defconfig
- > make
- > export UBOOTDIR=$PWD
-
-Download the latest Amlogic Buildroot package, and extract it :
- > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz
- > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader
- > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418
-
-Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/
- > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh $UBOOTDIR/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
-
- > sh $UBOOTDIR/blx_fix.sh \
-	fip/bl2_acs.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/bl21.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
- > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
- > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
- > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
- > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/p212/README.libretech-cc b/board/amlogic/p212/README.libretech-cc
deleted file mode 100644
index 74434d4..0000000
--- a/board/amlogic/p212/README.libretech-cc
+++ /dev/null
@@ -1,134 +0,0 @@
-U-Boot for LibreTech CC
-=======================
-
-LibreTech CC is a single board computer manufactured by Libre Technology
-with the following specifications:
-
- - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - 10/100 Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 2.0 Host
- - eMMC, microSD
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the U-Boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - USB Host
- - ADC
-
-U-Boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make libretech-cc_defconfig
- > make
-
-Image creation
-==============
-
-To boot the system, u-boot must be combined with several earlier stage
-bootloaders:
-
-* bl2.bin: vendor-provided binary blob
-* bl21.bin: built from vendor u-boot source
-* bl30.bin: vendor-provided binary blob
-* bl301.bin: built from vendor u-boot source
-* bl31.bin: vendor-provided binary blob
-* acs.bin: built from vendor u-boot source
-
-These binaries and the tools required below have been collected and prebuilt
-for convenience at <https://github.com/BayLibre/u-boot/releases/>
-
-Download and extract the libretech-cc release from there, and set FIPDIR to
-point to the `fip` subdirectory.
-
- > export FIPDIR=/path/to/extracted/fip
-
-Alternatively, you can obtain the original vendor u-boot tree which
-contains the required blobs and sources, and build yourself.
-Note that old compilers are required for this to build. The compilers here
-are suggested by Amlogic, and they are 32-bit x86 binaries.
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot
- > cd amlogic-u-boot
- > make libretech_cc_defconfig
- > make
- > export FIPDIR=$PWD/fip
-
-Once you have the binaries available (either through the prebuilt download,
-or having built the vendor u-boot yourself), you can then proceed to glue
-everything together. Go back to mainline U-Boot source tree then :
-
- > mkdir fip
-
- > cp $FIPDIR/gxl/bl2.bin fip/
- > cp $FIPDIR/gxl/acs.bin fip/
- > cp $FIPDIR/gxl/bl21.bin fip/
- > cp $FIPDIR/gxl/bl30.bin fip/
- > cp $FIPDIR/gxl/bl301.bin fip/
- > cp $FIPDIR/gxl/bl31.img fip/
- > cp u-boot.bin fip/bl33.bin
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl2_acs.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/bl21.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
- > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
-
-Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no
-source code. Should you prefer to avoid that, there are open source reverse
-engineered versions available:
-
-1. gxlimg <https://github.com/repk/gxlimg>, which comes with a handy
-   Makefile that automates the whole process.
-2. meson-tools <https://github.com/afaerber/meson-tools>
-
-However, these community-developed alternatives are not endorsed by or
-supported by Amlogic.
diff --git a/board/amlogic/p212/README.p212 b/board/amlogic/p212/README.p212
deleted file mode 100644
index 3776f24..0000000
--- a/board/amlogic/p212/README.p212
+++ /dev/null
@@ -1,102 +0,0 @@
-U-Boot for Amlogic P212
-=======================
-
-P212 is a reference board manufactured by Amlogic with the following
-specifications:
-
- - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - 10/100 Ethernet
- - HDMI 2.0 4K/60Hz display
- - 2 x USB 2.0 Host
- - eMMC, microSD
- - Infrared receiver
- - SDIO WiFi Module
- - CVBS+Stereo Audio Jack
-
-Schematics are available from Amlogic on demand.
-
-Currently the u-boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - USB Host
- - ADC
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make p212_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
- > cd amlogic-u-boot
- > make gxl_p212_v1_defconfig
- > make
- > export FIPDIR=$PWD/fip
-
-Go back to mainline U-boot source tree then :
- > mkdir fip
-
- > cp $FIPDIR/gxl/bl2.bin fip/
- > cp $FIPDIR/gxl/acs.bin fip/
- > cp $FIPDIR/gxl/bl21.bin fip/
- > cp $FIPDIR/gxl/bl30.bin fip/
- > cp $FIPDIR/gxl/bl301.bin fip/
- > cp $FIPDIR/gxl/bl31.img fip/
- > cp u-boot.bin fip/bl33.bin
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl2_acs.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/bl21.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
- > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
- > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
- > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444