From 0ce3639d6f612d3fc215474a45075717d4e7aaa8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 11 Jun 2020 10:53:49 +0200 Subject: board: amlogic: move boards doc into doc/board/amlogic Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong --- board/amlogic/p212/README.khadas-vim | 101 ------------------------- board/amlogic/p212/README.libretech-ac | 102 ------------------------- board/amlogic/p212/README.libretech-cc | 134 --------------------------------- board/amlogic/p212/README.p212 | 102 ------------------------- 4 files changed, 439 deletions(-) delete mode 100644 board/amlogic/p212/README.khadas-vim delete mode 100644 board/amlogic/p212/README.libretech-ac delete mode 100644 board/amlogic/p212/README.libretech-cc delete mode 100644 board/amlogic/p212/README.p212 (limited to 'board/amlogic/p212') diff --git a/board/amlogic/p212/README.khadas-vim b/board/amlogic/p212/README.khadas-vim deleted file mode 100644 index ccf9338..0000000 --- a/board/amlogic/p212/README.khadas-vim +++ /dev/null @@ -1,101 +0,0 @@ -U-Boot for Khadas VIM -======================= - -Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion -Technology Co., Ltd with the following specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - - 8GB/16GBeMMC - - microSD - - SDIO Wifi Module, Bluetooth - - Two channels IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot - > cd vim-u-boot - > make kvim_defconfig - > make CROSS_COMPILE=aarch64-none-elf- - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-ac b/board/amlogic/p212/README.libretech-ac deleted file mode 100644 index 3f713ec..0000000 --- a/board/amlogic/p212/README.libretech-ac +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for LibreTech AC -======================= - -LibreTech AC is a single board computer manufactured by Libre Technology -with the following specifications: - - - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - - ARM Mali 450 GPU - - 512MiB DDR4 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host - - eMMC, SPI NOR Flash - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC - - Ethernet - - USB - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-ac_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot - > cd amlogic-u-boot - > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh - > make libretech_ac_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-cc b/board/amlogic/p212/README.libretech-cc deleted file mode 100644 index 74434d4..0000000 --- a/board/amlogic/p212/README.libretech-cc +++ /dev/null @@ -1,134 +0,0 @@ -U-Boot for LibreTech CC -======================= - -LibreTech CC is a single board computer manufactured by Libre Technology -with the following specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-cc_defconfig - > make - -Image creation -============== - -To boot the system, u-boot must be combined with several earlier stage -bootloaders: - -* bl2.bin: vendor-provided binary blob -* bl21.bin: built from vendor u-boot source -* bl30.bin: vendor-provided binary blob -* bl301.bin: built from vendor u-boot source -* bl31.bin: vendor-provided binary blob -* acs.bin: built from vendor u-boot source - -These binaries and the tools required below have been collected and prebuilt -for convenience at - -Download and extract the libretech-cc release from there, and set FIPDIR to -point to the `fip` subdirectory. - - > export FIPDIR=/path/to/extracted/fip - -Alternatively, you can obtain the original vendor u-boot tree which -contains the required blobs and sources, and build yourself. -Note that old compilers are required for this to build. The compilers here -are suggested by Amlogic, and they are 32-bit x86 binaries. - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > cd amlogic-u-boot - > make libretech_cc_defconfig - > make - > export FIPDIR=$PWD/fip - -Once you have the binaries available (either through the prebuilt download, -or having built the vendor u-boot yourself), you can then proceed to glue -everything together. Go back to mainline U-Boot source tree then : - - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 - -Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no -source code. Should you prefer to avoid that, there are open source reverse -engineered versions available: - -1. gxlimg , which comes with a handy - Makefile that automates the whole process. -2. meson-tools - -However, these community-developed alternatives are not endorsed by or -supported by Amlogic. diff --git a/board/amlogic/p212/README.p212 b/board/amlogic/p212/README.p212 deleted file mode 100644 index 3776f24..0000000 --- a/board/amlogic/p212/README.p212 +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for Amlogic P212 -======================= - -P212 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - - SDIO WiFi Module - - CVBS+Stereo Audio Jack - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make p212_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxl_p212_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 -- cgit v1.1 From 9c55f5d11260c5aa0f91d8cb32aa0ad00910659d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 11 Jun 2020 10:57:39 +0200 Subject: board: amlogic: add board doc files to MAINTAINERS Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong --- board/amlogic/p212/MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'board/amlogic/p212') diff --git a/board/amlogic/p212/MAINTAINERS b/board/amlogic/p212/MAINTAINERS index 8848df0..cae6994 100644 --- a/board/amlogic/p212/MAINTAINERS +++ b/board/amlogic/p212/MAINTAINERS @@ -8,3 +8,7 @@ F: configs/khadas-vim_defconfig F: configs/libretech-ac_defconfig F: configs/libretech-cc_defconfig F: configs/p212_defconfig +F: doc/board/amlogic/p212.rst +F: doc/board/amlogic/libretech-ac.rst +F: doc/board/amlogic/libretech-cc.rst +F: doc/board/amlogic/khadas-vim.rst -- cgit v1.1