diff options
author | Patrice Chotard <patrice.chotard@st.com> | 2017-08-09 15:13:02 +0200 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-08-13 15:17:37 -0400 |
commit | bc5d0384458466ed5b3608d326eec03cd4f13016 (patch) | |
tree | 88ab058e10fbde3e58f210f57c1e1c39373bda9d /arch | |
parent | 7b07a20c5e668b67348dc7a3abbeb437ab0afa52 (diff) | |
download | u-boot-bc5d0384458466ed5b3608d326eec03cd4f13016.zip u-boot-bc5d0384458466ed5b3608d326eec03cd4f13016.tar.gz u-boot-bc5d0384458466ed5b3608d326eec03cd4f13016.tar.bz2 |
stm32f1: remove stm32f1 support
A few years ago STM32F1 SoCs support has been added :
0144caf22ce6acd5c gpio: stm32: add stm32f1 support
2d18ef2364fd3561a ARMv7M: add STM32F1 support
But neither STM32F1 dedicated defconfig nor board was
associated to these commits.
Got confirmation from Tom Rini and Matt Porter to remove
all this code [1]
[1] http://u-boot.10912.n7.nabble.com/Remove-STM32F1-support-td301603.html
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/include/asm/arch-stm32f1/gpio.h | 118 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-stm32f1/stm32.h | 124 | ||||
-rw-r--r-- | arch/arm/mach-stm32/Kconfig | 4 | ||||
-rw-r--r-- | arch/arm/mach-stm32/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/Kconfig | 3 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/Makefile | 14 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/clock.c | 196 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/flash.c | 180 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/soc.c | 36 | ||||
-rw-r--r-- | arch/arm/mach-stm32/stm32f1/timer.c | 121 |
10 files changed, 0 insertions, 797 deletions
diff --git a/arch/arm/include/asm/arch-stm32f1/gpio.h b/arch/arm/include/asm/arch-stm32f1/gpio.h deleted file mode 100644 index 8e8712f..0000000 --- a/arch/arm/include/asm/arch-stm32f1/gpio.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2011 - * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com - * - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _STM32_GPIO_H_ -#define _STM32_GPIO_H_ - -enum stm32_gpio_port { - STM32_GPIO_PORT_A = 0, - STM32_GPIO_PORT_B, - STM32_GPIO_PORT_C, - STM32_GPIO_PORT_D, - STM32_GPIO_PORT_E, - STM32_GPIO_PORT_F, - STM32_GPIO_PORT_G, -}; - -enum stm32_gpio_pin { - STM32_GPIO_PIN_0 = 0, - STM32_GPIO_PIN_1, - STM32_GPIO_PIN_2, - STM32_GPIO_PIN_3, - STM32_GPIO_PIN_4, - STM32_GPIO_PIN_5, - STM32_GPIO_PIN_6, - STM32_GPIO_PIN_7, - STM32_GPIO_PIN_8, - STM32_GPIO_PIN_9, - STM32_GPIO_PIN_10, - STM32_GPIO_PIN_11, - STM32_GPIO_PIN_12, - STM32_GPIO_PIN_13, - STM32_GPIO_PIN_14, - STM32_GPIO_PIN_15 -}; - -enum stm32_gpio_icnf { - STM32_GPIO_ICNF_AN = 0, - STM32_GPIO_ICNF_IN_FLT, - STM32_GPIO_ICNF_IN_PUD, - STM32_GPIO_ICNF_RSVD -}; - -enum stm32_gpio_ocnf { - STM32_GPIO_OCNF_GP_PP = 0, - STM32_GPIO_OCNF_GP_OD, - STM32_GPIO_OCNF_AF_PP, - STM32_GPIO_OCNF_AF_OD -}; - -enum stm32_gpio_pupd { - STM32_GPIO_PUPD_DOWN = 0, - STM32_GPIO_PUPD_UP, -}; - -enum stm32_gpio_mode { - STM32_GPIO_MODE_IN = 0, - STM32_GPIO_MODE_OUT_10M, - STM32_GPIO_MODE_OUT_2M, - STM32_GPIO_MODE_OUT_50M -}; - -enum stm32_gpio_af { - STM32_GPIO_AF0 = 0, - STM32_GPIO_AF1, - STM32_GPIO_AF2, - STM32_GPIO_AF3, - STM32_GPIO_AF4, - STM32_GPIO_AF5, - STM32_GPIO_AF6, - STM32_GPIO_AF7, - STM32_GPIO_AF8, - STM32_GPIO_AF9, - STM32_GPIO_AF10, - STM32_GPIO_AF11, - STM32_GPIO_AF12, - STM32_GPIO_AF13, - STM32_GPIO_AF14, - STM32_GPIO_AF15 -}; - -struct stm32_gpio_dsc { - enum stm32_gpio_port port; - enum stm32_gpio_pin pin; -}; - -struct stm32_gpio_ctl { - enum stm32_gpio_icnf icnf; - enum stm32_gpio_ocnf ocnf; - enum stm32_gpio_mode mode; - enum stm32_gpio_pupd pupd; - enum stm32_gpio_af af; -}; - -static inline unsigned stm32_gpio_to_port(unsigned gpio) -{ - return gpio / 16; -} - -static inline unsigned stm32_gpio_to_pin(unsigned gpio) -{ - return gpio % 16; -} - -int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc, - const struct stm32_gpio_ctl *gpio_ctl); -int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state); - -#endif /* _STM32_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h deleted file mode 100644 index 1af73c5..0000000 --- a/arch/arm/include/asm/arch-stm32f1/stm32.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2011 - * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com - * - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _MACH_STM32_H_ -#define _MACH_STM32_H_ - -/* - * Peripheral memory map - */ -#define STM32_PERIPH_BASE 0x40000000 -#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) -#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) -#define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00018000) - -#define STM32_BUS_MASK 0xFFFF0000 - -#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800) -#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00) -#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000) -#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400) -#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800) -#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00) -#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000) - -/* - * Register maps - */ -struct stm32_des_regs { - u16 flash_size; - u16 pad1; - u32 pad2; - u32 uid0; - u32 uid1; - u32 uid2; -}; - -struct stm32_rcc_regs { - u32 cr; /* RCC clock control */ - u32 cfgr; /* RCC clock configuration */ - u32 cir; /* RCC clock interrupt */ - u32 apb2rstr; /* RCC APB2 peripheral reset */ - u32 apb1rstr; /* RCC APB1 peripheral reset */ - u32 ahbenr; /* RCC AHB peripheral clock enable */ - u32 apb2enr; /* RCC APB2 peripheral clock enable */ - u32 apb1enr; /* RCC APB1 peripheral clock enable */ - u32 bdcr; /* RCC Backup domain control */ - u32 csr; /* RCC clock control & status */ -}; - -struct stm32_pwr_regs { - u32 cr; - u32 csr; -}; - -struct stm32_flash_regs { - u32 acr; - u32 keyr; - u32 optkeyr; - u32 sr; - u32 cr; - u32 ar; - u32 rsvd1; /* Reserved */ - u32 obr; - u32 wrpr; - u32 rsvd2[8]; /* Reserved */ - u32 keyr2; - u32 rsvd3; - u32 sr2; - u32 cr2; - u32 ar2; -}; - -/* Per bank register set for XL devices */ -struct stm32_flash_bank_regs { - u32 keyr; - u32 rsvd; /* Reserved */ - u32 sr; - u32 cr; - u32 ar; -}; - -/* - * Registers access macros - */ -#define STM32_DES_BASE (0x1ffff7e0) -#define STM32_DES ((struct stm32_des_regs *)STM32_DES_BASE) - -#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x9000) -#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) - -#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) -#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) - -#define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0xa000) -#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE) - -#define STM32_FLASH_SR_BSY (1 << 0) - -#define STM32_FLASH_CR_PG (1 << 0) -#define STM32_FLASH_CR_PER (1 << 1) -#define STM32_FLASH_CR_STRT (1 << 6) -#define STM32_FLASH_CR_LOCK (1 << 7) - -enum clock { - CLOCK_CORE, - CLOCK_AHB, - CLOCK_APB1, - CLOCK_APB2 -}; - -int configure_clocks(void); -unsigned long clock_get(enum clock clck); - -#endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 8f43714..f70f5ec 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -3,9 +3,6 @@ if STM32 config STM32F4 bool "stm32f4 family" -config STM32F1 - bool "stm32f1 family" - config STM32F7 bool "stm32f7 family" select SUPPORT_SPL @@ -29,7 +26,6 @@ config STM32F7 select SPL_XIP_SUPPORT source "arch/arm/mach-stm32/stm32f4/Kconfig" -source "arch/arm/mach-stm32/stm32f1/Kconfig" source "arch/arm/mach-stm32/stm32f7/Kconfig" endif diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile index ffc537f..6b76944 100644 --- a/arch/arm/mach-stm32/Makefile +++ b/arch/arm/mach-stm32/Makefile @@ -5,6 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_STM32F1) += stm32f1/ obj-$(CONFIG_STM32F4) += stm32f4/ obj-$(CONFIG_STM32F7) += stm32f7/ diff --git a/arch/arm/mach-stm32/stm32f1/Kconfig b/arch/arm/mach-stm32/stm32f1/Kconfig deleted file mode 100644 index f627fd2..0000000 --- a/arch/arm/mach-stm32/stm32f1/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -if STM32F1 - -endif diff --git a/arch/arm/mach-stm32/stm32f1/Makefile b/arch/arm/mach-stm32/stm32f1/Makefile deleted file mode 100644 index e2081db..0000000 --- a/arch/arm/mach-stm32/stm32f1/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2015 -# Kamil Lulko, <kamil.lulko@gmail.com> -# -# Copyright 2015 ATS Advanced Telematics Systems GmbH -# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += soc.o clock.o timer.o flash.o diff --git a/arch/arm/mach-stm32/stm32f1/clock.c b/arch/arm/mach-stm32/stm32f1/clock.c deleted file mode 100644 index 2820848..0000000 --- a/arch/arm/mach-stm32/stm32f1/clock.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * (C) Copyright 2014 - * STMicroelectronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/stm32.h> - -#define RCC_CR_HSION (1 << 0) -#define RCC_CR_HSEON (1 << 16) -#define RCC_CR_HSERDY (1 << 17) -#define RCC_CR_HSEBYP (1 << 18) -#define RCC_CR_CSSON (1 << 19) -#define RCC_CR_PLLON (1 << 24) -#define RCC_CR_PLLRDY (1 << 25) - -#define RCC_CFGR_PLLMUL_MASK 0x3C0000 -#define RCC_CFGR_PLLMUL_SHIFT 18 -#define RCC_CFGR_PLLSRC_HSE (1 << 16) - -#define RCC_CFGR_AHB_PSC_MASK 0xF0 -#define RCC_CFGR_APB1_PSC_MASK 0x700 -#define RCC_CFGR_APB2_PSC_MASK 0x3800 -#define RCC_CFGR_SW0 (1 << 0) -#define RCC_CFGR_SW1 (1 << 1) -#define RCC_CFGR_SW_MASK 0x3 -#define RCC_CFGR_SW_HSI 0 -#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 -#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 -#define RCC_CFGR_SWS0 (1 << 2) -#define RCC_CFGR_SWS1 (1 << 3) -#define RCC_CFGR_SWS_MASK 0xC -#define RCC_CFGR_SWS_HSI 0 -#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 -#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 -#define RCC_CFGR_HPRE_SHIFT 4 -#define RCC_CFGR_PPRE1_SHIFT 8 -#define RCC_CFGR_PPRE2_SHIFT 11 - -#define RCC_APB1ENR_PWREN (1 << 28) - -#define PWR_CR_VOS0 (1 << 14) -#define PWR_CR_VOS1 (1 << 15) -#define PWR_CR_VOS_MASK 0xC000 -#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0) - -#define FLASH_ACR_WS(n) n -#define FLASH_ACR_PRFTEN (1 << 8) -#define FLASH_ACR_ICEN (1 << 9) -#define FLASH_ACR_DCEN (1 << 10) - -struct psc { - u8 ahb_psc; - u8 apb1_psc; - u8 apb2_psc; -}; - -#define AHB_PSC_1 0 -#define AHB_PSC_2 0x8 -#define AHB_PSC_4 0x9 -#define AHB_PSC_8 0xA -#define AHB_PSC_16 0xB -#define AHB_PSC_64 0xC -#define AHB_PSC_128 0xD -#define AHB_PSC_256 0xE -#define AHB_PSC_512 0xF - -#define APB_PSC_1 0 -#define APB_PSC_2 0x4 -#define APB_PSC_4 0x5 -#define APB_PSC_8 0x6 -#define APB_PSC_16 0x7 - -#if !defined(CONFIG_STM32_HSE_HZ) -#error "CONFIG_STM32_HSE_HZ not defined!" -#else -#if (CONFIG_STM32_HSE_HZ == 8000000) -#define RCC_CFGR_PLLMUL_CFG 0x7 -struct psc psc_hse = { - .ahb_psc = AHB_PSC_1, - .apb1_psc = APB_PSC_2, - .apb2_psc = APB_PSC_1 -}; -#else -#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" -#endif -#endif - -int configure_clocks(void) -{ - /* Reset RCC configuration */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); - writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ - clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON - | RCC_CR_PLLON)); - clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); - writel(0, &STM32_RCC->cir); /* Disable all interrupts */ - - /* Configure for HSE+PLL operation */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); - while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) - ; - - /* Enable high performance mode, System frequency up to 168 MHz */ - setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); - writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); - - setbits_le32(&STM32_RCC->cfgr, - RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT); - setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE); - setbits_le32(&STM32_RCC->cfgr, (( - psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT) - | (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT) - | (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); - - setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); - - while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) - ; - - /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ - writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN - | FLASH_ACR_DCEN, &STM32_FLASH->acr); - - clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); - setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); - - while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != - RCC_CFGR_SWS_PLL) - ; - - return 0; -} - -unsigned long clock_get(enum clock clck) -{ - u32 sysclk = 0; - u32 shift = 0; - /* PLL table lookups for clock computation */ - u8 pll_mul_table[16] = { - 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16 - }; - /* Prescaler table lookups for clock computation */ - u8 ahb_psc_table[16] = { - 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 - }; - u8 apb_psc_table[8] = { - 0, 0, 0, 0, 1, 2, 3, 4 - }; - - if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == - RCC_CFGR_SWS_PLL) { - u16 pll; - pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK) - >> RCC_CFGR_PLLMUL_SHIFT); - sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll]; - } - - switch (clck) { - case CLOCK_CORE: - return sysclk; - break; - case CLOCK_AHB: - shift = ahb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) - >> RCC_CFGR_HPRE_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB1: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) - >> RCC_CFGR_PPRE1_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB2: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) - >> RCC_CFGR_PPRE2_SHIFT)]; - return sysclk >>= shift; - break; - default: - return 0; - break; - } -} diff --git a/arch/arm/mach-stm32/stm32f1/flash.c b/arch/arm/mach-stm32/stm32f1/flash.c deleted file mode 100644 index 9dc8e11..0000000 --- a/arch/arm/mach-stm32/stm32f1/flash.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/stm32.h> - -#define STM32_FLASH_KEY1 0x45670123 -#define STM32_FLASH_KEY2 0xcdef89ab - -#define STM32_NUM_BANKS 2 -#define STM32_MAX_BANK 0x200 - -flash_info_t flash_info[STM32_NUM_BANKS]; -static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS]; - -static void stm32f1_flash_lock(u8 bank, u8 lock) -{ - if (lock) { - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK); - } else { - writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr); - writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr); - } -} - -/* Only XL devices are supported (2 KiB sector size) */ -unsigned long flash_init(void) -{ - u8 i, banks; - u16 j, size; - - /* Set up accessors for XL devices with wonky register layout */ - flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr; - flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2; - - /* - * Get total flash size (in KiB) and configure number of banks - * present and sector count per bank. - */ - size = readw(&STM32_DES->flash_size); - if (size <= STM32_MAX_BANK) { - banks = 1; - flash_info[0].sector_count = size >> 1; - } else { - banks = 2; - flash_info[0].sector_count = STM32_MAX_BANK >> 1; - flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1; - } - - /* Configure start/size for all sectors */ - for (i = 0; i < banks; i++) { - flash_info[i].flash_id = FLASH_STM32F1; - flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19); - flash_info[i].size = 2048; - for (j = 1; (j < flash_info[i].sector_count); j++) { - flash_info[i].start[j] = flash_info[i].start[j - 1] - + 2048; - flash_info[i].size += 2048; - } - } - - return size << 10; -} - -void flash_print_info(flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Missing or unknown FLASH type\n"); - return; - } else if (info->flash_id == FLASH_STM32F1) { - printf("STM32F1 Embedded Flash\n"); - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf("\n"); - return; -} - -int flash_erase(flash_info_t *info, int first, int last) -{ - u8 bank = 0xff; - int i; - - for (i = 0; i < STM32_NUM_BANKS; i++) { - if (info == &flash_info[i]) { - bank = i; - break; - } - } - if (bank == 0xff) - return -1; - - stm32f1_flash_lock(bank, 0); - - for (i = first; i <= last; i++) { - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); - - writel(info->start[i], &flash_bank[bank]->ar); - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT); - - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - } - - clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); - - stm32f1_flash_lock(bank, 1); - - return 0; -} - -int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong i; - u8 bank = 0xff; - - if (addr & 1) { - printf("Flash address must be half word aligned\n"); - return -1; - } - - if (cnt & 1) { - printf("Flash length must be half word aligned\n"); - return -1; - } - - for (i = 0; i < 2; i++) { - if (info == &flash_info[i]) { - bank = i; - break; - } - } - - if (bank == 0xff) - return -1; - - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - - stm32f1_flash_lock(bank, 0); - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); - - /* STM32F1 requires half word writes */ - for (i = 0; i < cnt >> 1; i++) { - *(u16 *)(addr + i * 2) = ((u16 *)src)[i]; - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - } - - clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); - - stm32f1_flash_lock(bank, 1); - - return 0; -} diff --git a/arch/arm/mach-stm32/stm32f1/soc.c b/arch/arm/mach-stm32/stm32f1/soc.c deleted file mode 100644 index 4438621..0000000 --- a/arch/arm/mach-stm32/stm32f1/soc.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/armv7m.h> -#include <asm/arch/stm32.h> - -u32 get_cpu_rev(void) -{ - return 0; -} - -int arch_cpu_init(void) -{ - configure_clocks(); - - /* - * Configure the memory protection unit (MPU) to allow full access to - * the whole 4GB address space. - */ - writel(0, &V7M_MPU->rnr); - writel(0, &V7M_MPU->rbar); - writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB - | V7M_MPU_RASR_EN), &V7M_MPU->rasr); - writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl); - - return 0; -} diff --git a/arch/arm/mach-stm32/stm32f1/timer.c b/arch/arm/mach-stm32/stm32f1/timer.c deleted file mode 100644 index 6a26198..0000000 --- a/arch/arm/mach-stm32/stm32f1/timer.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/armv7m.h> -#include <asm/arch/stm32.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define STM32_TIM2_BASE (STM32_APB1PERIPH_BASE + 0x0000) - -#define RCC_APB1ENR_TIM2EN (1 << 0) - -struct stm32_tim2_5 { - u32 cr1; - u32 cr2; - u32 smcr; - u32 dier; - u32 sr; - u32 egr; - u32 ccmr1; - u32 ccmr2; - u32 ccer; - u32 cnt; - u32 psc; - u32 arr; - u32 reserved1; - u32 ccr1; - u32 ccr2; - u32 ccr3; - u32 ccr4; - u32 reserved2; - u32 dcr; - u32 dmar; - u32 or; -}; - -#define TIM_CR1_CEN (1 << 0) - -#define TIM_EGR_UG (1 << 0) - -int timer_init(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - - setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN); - - if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1)) - writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1, - &tim->psc); - else - writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1, - &tim->psc); - - writel(0xFFFFFFFF, &tim->arr); - writel(TIM_CR1_CEN, &tim->cr1); - setbits_le32(&tim->egr, TIM_EGR_UG); - - gd->arch.tbl = 0; - gd->arch.tbu = 0; - gd->arch.lastinc = 0; - - return 0; -} - -ulong get_timer(ulong base) -{ - return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base; -} - -unsigned long long get_ticks(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - u32 now; - - now = readl(&tim->cnt); - - if (now >= gd->arch.lastinc) - gd->arch.tbl += (now - gd->arch.lastinc); - else - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; - - gd->arch.lastinc = now; - - return gd->arch.tbl; -} - -void reset_timer(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - - gd->arch.lastinc = readl(&tim->cnt); - gd->arch.tbl = 0; -} - -/* delay x useconds */ -void __udelay(ulong usec) -{ - unsigned long long start; - - start = get_ticks(); /* get current timestamp */ - while ((get_ticks() - start) < usec) - ; /* loop till time has passed */ -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ_CLOCK; -} |