diff options
author | Igor Opaniuk <igor.opaniuk@toradex.com> | 2020-10-22 11:21:38 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2020-12-06 15:31:37 +0100 |
commit | a51fdba3fa1e18f5b3b294663949723f220576ba (patch) | |
tree | 220028aa937058ee3d387eee44d51bae88236f98 /arch | |
parent | 3d1103cefceccdc73c4fdda61910225e1fd002e0 (diff) | |
download | u-boot-a51fdba3fa1e18f5b3b294663949723f220576ba.zip u-boot-a51fdba3fa1e18f5b3b294663949723f220576ba.tar.gz u-boot-a51fdba3fa1e18f5b3b294663949723f220576ba.tar.bz2 |
board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
IT V1.1A System on Module support [1].
Boot log:
U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In: serial@5a070000
Out: serial@5a070000
Err: serial@5a070000
Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
Serial# 06617018
Net: eth0: ethernet@5b040000 [PRIME]
Hit any key to stop autoboot: 0
Functionality wise the following is known to be working:
- eMMC and MMC/SD card
- Ethernet (*)
- GPIOs
- I2C
Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.
* With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
ETH PHY encounters bring up problems after reset, this will be fixed
soon on SCU FW side.
[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-imx/imx8/Kconfig | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 9d1f73d..04b9729 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -65,6 +65,11 @@ config TARGET_COLIBRI_IMX8X select BOARD_LATE_INIT select IMX8QXP +config TARGET_APALIS_IMX8X + bool "Support Apalis iMX8X module" + select BOARD_LATE_INIT + select IMX8QXP + config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" select BOARD_LATE_INIT @@ -98,6 +103,7 @@ source "board/freescale/imx8qxp_mek/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" +source "board/toradex/apalis-imx8x/Kconfig" source "board/siemens/capricorn/Kconfig" config IMX_SNVS_SEC_SC |