Add imx93-var-som support

Add support for the Variscite VAR-SOM-IMX93 evaluation kit. The SoM
consists of an NXP iMX93 dual A55 CPU. The SoM is mounted on a Variscite
Symphony SBC.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>

6 files changed, 692 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e9e58c5..773c254 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1125,7 +1125,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-librem5-r4.dtb
 
 dtb-$(CONFIG_ARCH_IMX9) += \
-	imx93-11x11-evk.dtb
+	imx93-11x11-evk.dtb \
+	imx93-var-som-symphony.dtb
 
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
 	imxrt1020-evk.dtb \
diff --git a/arch/arm/dts/imx93-var-som-symphony-u-boot.dtsi b/arch/arm/dts/imx93-var-som-symphony-u-boot.dtsi
new file mode 100644
index 0000000..1193fc0
--- /dev/null
+++ b/arch/arm/dts/imx93-var-som-symphony-u-boot.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+#include "imx93-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog3>;
+		bootph-pre-ram;
+		bootph-some-ram;
+	};
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&aips1 {
+	bootph-pre-ram;
+	bootph-all;
+};
+
+&aips2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&aips3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&iomuxc {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	bootph-pre-ram;
+};
+
+&pinctrl_uart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio4 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpuart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&ethphy0 {
+	reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <15000>;
+	reset-deassert-us = <100000>;
+};
+
+&ethphy1 {
+	reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <15000>;
+	reset-deassert-us = <100000>;
+};
+
+&s4muap {
+	bootph-pre-ram;
+	bootph-some-ram;
+	status = "okay";
+};
+
+&clk {
+	bootph-all;
+	bootph-pre-ram;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
+
+&osc_32k {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&osc_24m {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&clk_ext1 {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+/*
+ * The two nodes below won't be needed once nxp,pca9451a
+ * support is added to the Linux kernel.
+ */
+&iomuxc {
+	pinctrl_lpi2c3: lpi2c3grp {
+	bootph-pre-ram;
+	fsl,pins = <
+		MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+		MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+	>;
+	};
+};
+
+&lpi2c3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		bootph-pre-ram;
+		bootph-some-ram;
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+
+		regulators {
+			bootph-pre-ram;
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/imx93-var-som-symphony.dts b/arch/arm/dts/imx93-var-som-symphony.dts
new file mode 100644
index 0000000..a67bd00
--- /dev/null
+++ b/arch/arm/dts/imx93-var-som-symphony.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93-var-som.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
+	compatible = "variscite,var-som-mx93-symphony",
+		     "variscite,var-som-mx93", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/*
+	 * Needed only for Symphony <= v1.5
+	 */
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethosu_mem: ethosu-region@88000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x0 0x88000000 0x0 0x8000000>;
+		};
+
+		vdev0vring0: vdev0vring0@87ee0000 {
+			reg = <0 0x87ee0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@87ee8000 {
+			reg = <0 0x87ee8000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@87ef0000 {
+			reg = <0 0x87ef0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@87ef8000 {
+			reg = <0 0x87ef8000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@87f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87f00000 0 0x100000>;
+			no-map;
+		};
+
+		ele_reserved: ele-reserved@87de0000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87de0000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+/* Use external instead of internal RTC*/
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			qca,disable-smarteee;
+			eee-broken-1000t;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX                       0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX               0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__GPIO1_IO00			0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__GPIO2_IO23			0x31e
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+	scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>;
+	clock-names = "ipg", "per";
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx93-var-som.dtsi b/arch/arm/dts/imx93-var-som.dtsi
new file mode 100644
index 0000000..6c77b88
--- /dev/null
+++ b/arch/arm/dts/imx93-var-som.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 module";
+	compatible = "variscite,var-som-mx93", "fsl,imx93";
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
+	};
+
+	reg_eqos_phy: regulator-eqos-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eqos_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_eqos_phy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <1000000>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_reg_eqos_phy: regeqosgrp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__GPIO1_IO07			0x51e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h
index 1169ffd..1ce6ac4 100644
--- a/arch/arm/include/asm/arch-imx9/clock.h
+++ b/arch/arm/include/asm/arch-imx9/clock.h
@@ -222,6 +222,7 @@ u32 mxc_get_clock(enum mxc_clock clk);
 void dram_pll_init(ulong pll_val);
 void dram_enable_bypass(ulong clk_val);
 void dram_disable_bypass(void);
+void set_arm_core_max_clk(void);
 
 int configure_intpll(enum ccm_clk_src pll, u32 freq);
 
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index 7ba3835..28202df 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -32,9 +32,16 @@ config TARGET_IMX93_11X11_EVK
         select BINMAN
 	select IMX93
 
+config TARGET_IMX93_VAR_SOM
+	bool "imx93_var_som"
+        select BINMAN
+	select IMX93
+	select IMX9_LPDDR4X
+
 endchoice
 
 source "board/freescale/imx93_evk/Kconfig"
+source "board/variscite/imx93_var_som/Kconfig"
 
 endif