Convert CONFIG_SYS_PMAN et al to Kconfig

This converts the following to Kconfig:
   CONFIG_NOBQFMAN
   CONFIG_SYS_DPAA_DCE
   CONFIG_SYS_DPAA_FMAN
   CONFIG_SYS_DPAA_PME
   CONFIG_SYS_DPAA_RMAN
   CONFIG_SYS_PMAN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

7 files changed, 45 insertions, 9 deletions

diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 8c5a6f6..805fe93 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -251,3 +251,6 @@ config QIXIS_I2C_ACCESS
 config HAS_FSL_DR_USB
 	def_bool y
 	depends on USB_EHCI_HCD && PPC
+
+config SYS_DPAA_FMAN
+	bool
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index ebca11d..2862257 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -69,6 +69,7 @@ config ARCH_LS1043A
 	select GICV2
 	select HAS_FSL_XHCI_USB if USB_HOST
 	select SKIP_LOWLEVEL_INIT
+	select SYS_DPAA_FMAN
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
@@ -106,6 +107,7 @@ config ARCH_LS1046A
 	select GICV2
 	select HAS_FSL_XHCI_USB if USB_HOST
 	select SKIP_LOWLEVEL_INIT
+	select SYS_DPAA_FMAN
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 6440ce7..f18407b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -24,11 +24,7 @@ void get_sys_info(struct sys_info *sys_info)
 /* rcw_tmp is needed to get FMAN clock, or to get cluster group A
  * mux 2 clock for LS1043A/LS1046A.
  */
-#if defined(CONFIG_SYS_DPAA_FMAN) || \
-	    defined(CONFIG_ARCH_LS1046A) || \
-	    defined(CONFIG_ARCH_LS1043A)
-	u32 rcw_tmp;
-#endif
+	__maybe_unused u32 rcw_tmp;
 	struct ccsr_clk *clk = (void *)(CFG_SYS_FSL_CLK_ADDR);
 	unsigned int cpu;
 	const u8 core_cplx_pll[8] = {
@@ -96,7 +92,7 @@ void get_sys_info(struct sys_info *sys_info)
 
 #define HWA_CGA_M1_CLK_SEL	0xe0000000
 #define HWA_CGA_M1_CLK_SHIFT	29
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 	rcw_tmp = in_be32(&gur->rcwsr[7]);
 	switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
 	case 2:
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
index e972603..ad20d71 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
@@ -41,7 +41,7 @@ void set_icids(void)
 	/* setup general icid offsets */
 	set_icid(icid_tbl, icid_tbl_sz);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 	set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz);
 #endif
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
index 3bd993b..4880a31 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
@@ -59,7 +59,7 @@ struct icid_id_table icid_tbl[] = {
 
 int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 struct fman_icid_id_table fman_icid_tbl[] = {
 	/* port id, icid */
 	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
index abd847b..e47d3af 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
@@ -58,7 +58,7 @@ struct icid_id_table icid_tbl[] = {
 
 int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 struct fman_icid_id_table fman_icid_tbl[] = {
 	/* port id, icid */
 	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 24d3f1f..f236156 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -252,6 +252,8 @@ config TARGET_KMCENT2
 	bool "Support kmcent2"
 	select VENDOR_KM
 	select FSL_CORENET
+	select SYS_DPAA_FMAN
+	select SYS_DPAA_PME
 	select SYS_L3_SIZE_256KB
 
 endchoice
@@ -618,6 +620,9 @@ config ARCH_P2041
 	select E500MC
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_FMAN
+	select SYS_DPAA_PME
+	select SYS_DPAA_RMAN
 	select SYS_FSL_ERRATUM_A004510
 	select SYS_FSL_ERRATUM_A004849
 	select SYS_FSL_ERRATUM_A005275
@@ -762,6 +767,7 @@ config ARCH_T1024
 	select FSL_CORENET
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_FMAN
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A008378
 	select SYS_FSL_ERRATUM_A008109
@@ -792,6 +798,8 @@ config ARCH_T1040
 	select FSL_CORENET
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_FMAN
+	select SYS_DPAA_PME
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A008044
 	select SYS_FSL_ERRATUM_A008378
@@ -822,6 +830,8 @@ config ARCH_T1042
 	select FSL_CORENET
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_FMAN
+	select SYS_DPAA_PME
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A008044
 	select SYS_FSL_ERRATUM_A008378
@@ -851,6 +861,10 @@ config ARCH_T2080
 	select FSL_CORENET
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_DCE if !NOBQFMAN
+	select SYS_DPAA_FMAN if !NOBQFMAN
+	select SYS_DPAA_PME if !NOBQFMAN
+	select SYS_DPAA_RMAN if !NOBQFMAN
 	select SYS_FSL_DDR_VER_47
 	select SYS_FSL_ERRATUM_A006379
 	select SYS_FSL_ERRATUM_A006593
@@ -871,6 +885,7 @@ config ARCH_T2080
 	select SYS_FSL_SRIO_LIODN
 	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
 	select SYS_FSL_USB_DUAL_PHY_ENABLE
+	select SYS_PMAN if !NOBQFMAN
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_SATA
@@ -886,6 +901,10 @@ config ARCH_T4240
 	select FSL_CORENET
 	select FSL_LAW
 	select SYS_CACHE_SHIFT_6
+	select SYS_DPAA_DCE if !NOBQFMAN
+	select SYS_DPAA_FMAN if !NOBQFMAN
+	select SYS_DPAA_PME if !NOBQFMAN
+	select SYS_DPAA_RMAN if !NOBQFMAN
 	select SYS_FSL_DDR_VER_47
 	select SYS_FSL_ERRATUM_A004468
 	select SYS_FSL_ERRATUM_A005871
@@ -907,6 +926,7 @@ config ARCH_T4240
 	select SYS_FSL_SRIO_LIODN
 	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
 	select SYS_FSL_USB_DUAL_PHY_ENABLE
+	select SYS_PMAN if !NOBQFMAN
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_SATA
@@ -947,6 +967,9 @@ config E6500
 	help
 		Enable PowerPC E6500 core
 
+config NOBQFMAN
+	bool
+
 config FSL_LAW
 	bool
 	help
@@ -1019,6 +1042,15 @@ config SYS_CCSRBAR_DEFAULT
 		if changed by pre-boot regime. The value here must match
 		the current value in SoC. If not sure, do not change.
 
+config SYS_DPAA_PME
+	bool
+
+config SYS_DPAA_DCE
+	bool
+
+config SYS_DPAA_RMAN
+	bool
+
 config A003399_NOR_WORKAROUND
 	bool
 	help
@@ -1195,6 +1227,9 @@ config FSL_PCIE_DISABLE_ASPM
 config FSL_PCIE_RESET
 	bool
 
+config SYS_PMAN
+	bool
+
 config SYS_FSL_RAID_ENGINE
 	bool