Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi

Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices.  The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes.  This also updates the "traditional U-Boot" DTs to that of kernel
v6.9.  I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".

The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.

4 files changed, 10 insertions, 3 deletions

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ddf9414..1766681 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1078,7 +1078,7 @@ config SPL_STACK_R_ADDR
 
 config SPL_SPI_SUNXI
 	bool "Support for SPI Flash on Allwinner SoCs in SPL"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN8I_V3S || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2
 	help
 	  Enable support for SPI Flash. This option allows SPL to read from
 	  sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 0140b07..046e9fb 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -333,7 +333,8 @@ uint32_t sunxi_get_spl_size(void)
  * The eGON SPL image can be located at 8KB or at 128KB into an SD card or
  * an eMMC device. The boot source has bit 4 set in the latter case.
  * By adding 120KB to the normal offset when booting from a "high" location
- * we can support both cases.
+ * we can support both cases. The H616 has the alternative location
+ * moved up to 256 KB instead of 128KB, so cater for that, too.
  * Also U-Boot proper is located at least 32KB after the SPL, but will
  * immediately follow the SPL if that is bigger than that.
  */
@@ -349,6 +350,8 @@ unsigned long board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
 	case SUNXI_BOOTED_FROM_MMC0_HIGH:
 	case SUNXI_BOOTED_FROM_MMC2_HIGH:
 		sector += (128 - 8) * 2;
+		if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+			sector += 128 * 2;
 		break;
 	}
 
diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c
index 87df312..8e19324 100644
--- a/arch/arm/mach-sunxi/pmic_bus.c
+++ b/arch/arm/mach-sunxi/pmic_bus.c
@@ -19,6 +19,7 @@
 #define AXP152_I2C_ADDR			0x30
 
 #define AXP209_I2C_ADDR			0x34
+#define AXP717_I2C_ADDR			0x34
 
 #define AXP305_I2C_ADDR			0x36
 #define AXP313_I2C_ADDR			0x36
@@ -36,6 +37,8 @@ static int pmic_i2c_address(void)
 		return AXP305_I2C_ADDR;
 	if (IS_ENABLED(CONFIG_AXP313_POWER))
 		return AXP313_I2C_ADDR;
+	if (IS_ENABLED(CONFIG_AXP717_POWER))
+		return AXP717_I2C_ADDR;
 
 	/* Other AXP2xx and AXP8xx variants */
 	return AXP209_I2C_ADDR;
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c
index 7acb44f..d7abdc2 100644
--- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
+++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -140,7 +140,8 @@ static bool is_sun6i_gen_spi(void)
 {
 	return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
 	       IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
-	       IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2);
+	       IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2) ||
+	       IS_ENABLED(CONFIG_MACH_SUN8I_V3S);
 }
 
 static uintptr_t spi0_base_address(void)