mvebu: select boot device at SoC level

Move the gdsys Controlcenter DC specific build time kwbimage.cfg
generation code into the mach-mvebu/ directory to be shared by all 32bit
mvebu platforms.

Remove board specific kwbimage.cfg files, and use the generated one
instead. These files are all identical, with two exceptions. Clearfog
and Helios4 use the sdio boot device, whereas all others use spi. Update
the defconfigs for the exceptional boards to generate the same
kwbimage.cfg as before.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>

4 files changed, 45 insertions, 2 deletions

diff --git a/arch/arm/mach-mvebu/.gitignore b/arch/arm/mach-mvebu/.gitignore
new file mode 100644
index 0000000..775b934
--- /dev/null
+++ b/arch/arm/mach-mvebu/.gitignore
@@ -0,0 +1 @@
+kwbimage.cfg
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index ade7b87..d907fac 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -25,6 +25,36 @@ obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
 obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
 obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
 obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
+
+extra-y += kwbimage.cfg
+
+KWB_REPLACE += BOOT_FROM
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),)
+	KWB_CFG_BOOT_FROM=spi
+endif
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),)
+	KWB_CFG_BOOT_FROM=sdio
+endif
+
+ifneq ($(CONFIG_SECURED_MODE_IMAGE),)
+KWB_REPLACE += CSK_INDEX
+KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX)
+
+KWB_REPLACE += SEC_BOOT_DEV
+KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \
+	$(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \
+	$(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \
+	)
+
+KWB_REPLACE += SEC_FUSE_DUMP
+KWB_CFG_SEC_FUSE_DUMP = a38x
+endif
+
+$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \
+		include/config/auto.conf
+	$(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \
+	<$< >$(dir $<)$(@F)
+
 endif # CONFIG_SPL_BUILD
 obj-y	+= gpio.o
 obj-y	+= mbus.o
diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h
index 2acfd33..9f51411 100644
--- a/arch/arm/mach-mvebu/include/mach/config.h
+++ b/arch/arm/mach-mvebu/include/mach/config.h
@@ -32,12 +32,12 @@
 #endif
 
 /*
- * By default kwbimage.cfg from board specific folder is used
+ * By default the generated mvebu kwbimage.cfg is used
  * If for some board, different configuration file need to be used,
  * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
  */
 #ifndef CONFIG_SYS_KWD_CONFIG
-#define	CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define	CONFIG_SYS_KWD_CONFIG	arch/arm/mach-mvebu/kwbimage.cfg
 #endif /* CONFIG_SYS_KWD_CONFIG */
 
 /* Add target to build it automatically upon "make" */
diff --git a/arch/arm/mach-mvebu/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in
new file mode 100644
index 0000000..72e67d7
--- /dev/null
+++ b/arch/arm/mach-mvebu/kwbimage.cfg.in
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada 38x uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+#@BOOT_FROM
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl.bin 0000005b 00000068