diff options
author | Ryder Lee <ryder.lee@mediatek.com> | 2018-11-15 10:07:52 +0800 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2018-11-28 23:04:50 -0500 |
commit | cbd2fba1eca11300649052e289685e7404e0b81c (patch) | |
tree | 1b1426bb0de6d7d249ee4fa627019dcf9ee04298 /arch/arm/mach-mediatek | |
parent | d84982dbfada5add7c405ab9a6e26132f7bfe8c8 (diff) | |
download | u-boot-cbd2fba1eca11300649052e289685e7404e0b81c.zip u-boot-cbd2fba1eca11300649052e289685e7404e0b81c.tar.gz u-boot-cbd2fba1eca11300649052e289685e7404e0b81c.tar.bz2 |
arm: MediaTek: add basic support for MT7629 boards
This adds a general board file based on MT7629 SoCs from MediaTek.
Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch/arm/mach-mediatek')
-rw-r--r-- | arch/arm/mach-mediatek/Kconfig | 26 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/Makefile | 6 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/cpu.c | 34 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/init.h | 11 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/mt7629/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/mt7629/init.c | 128 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/mt7629/lowlevel_init.S | 50 | ||||
-rw-r--r-- | arch/arm/mach-mediatek/spl.c | 43 |
8 files changed, 302 insertions, 0 deletions
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig new file mode 100644 index 0000000..d2ada97 --- /dev/null +++ b/arch/arm/mach-mediatek/Kconfig @@ -0,0 +1,26 @@ +if ARCH_MEDIATEK + +config SYS_SOC + default "mediatek" + +config SYS_VENDOR + default "mediatek" + +choice + prompt "MediaTek board select" + +config TARGET_MT7629 + bool "MediaTek MT7629 SoC" + select CPU_V7A + select SPL + select ARCH_MISC_INIT + help + The MediaTek MT7629 is a ARM-based SoC with a dual-core Cortex-A7 + including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet, + switch, USB3.0, PCIe, UART, SPI, I2C and PWM. + +endchoice + +source "board/mediatek/mt7629/Kconfig" + +endif diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile new file mode 100644 index 0000000..852d330 --- /dev/null +++ b/arch/arm/mach-mediatek/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += cpu.o +obj-$(CONFIG_SPL_BUILD) += spl.o + +obj-$(CONFIG_TARGET_MT7629) += mt7629/ diff --git a/arch/arm/mach-mediatek/cpu.c b/arch/arm/mach-mediatek/cpu.c new file mode 100644 index 0000000..b37e299 --- /dev/null +++ b/arch/arm/mach-mediatek/cpu.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MediaTek Inc. + */ + +#include <common.h> +#include <dm.h> +#include <wdt.h> +#include <dm/uclass-internal.h> + +int arch_misc_init(void) +{ + struct udevice *wdt; + int ret; + + ret = uclass_first_device_err(UCLASS_WDT, &wdt); + if (!ret) + wdt_stop(wdt); + + return 0; +} + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} + +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} diff --git a/arch/arm/mach-mediatek/init.h b/arch/arm/mach-mediatek/init.h new file mode 100644 index 0000000..1d896fb --- /dev/null +++ b/arch/arm/mach-mediatek/init.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 MediaTek Inc. + */ + +#ifndef __MEDIATEK_INIT_H_ +#define __MEDIATEK_INIT_H_ + +extern int mtk_soc_early_init(void); + +#endif /* __MEDIATEK_INIT_H_ */ diff --git a/arch/arm/mach-mediatek/mt7629/Makefile b/arch/arm/mach-mediatek/mt7629/Makefile new file mode 100644 index 0000000..007eb4a --- /dev/null +++ b/arch/arm/mach-mediatek/mt7629/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += init.o +obj-y += lowlevel_init.o diff --git a/arch/arm/mach-mediatek/mt7629/init.c b/arch/arm/mach-mediatek/mt7629/init.c new file mode 100644 index 0000000..ba91a6e --- /dev/null +++ b/arch/arm/mach-mediatek/mt7629/init.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + */ + +#include <clk.h> +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <ram.h> +#include <asm/arch/misc.h> +#include <asm/sections.h> +#include <dm/uclass.h> +#include <linux/io.h> + +#include <dt-bindings/clock/mt7629-clk.h> + +#define L2_CFG_BASE 0x10200000 +#define L2_CFG_SIZE 0x1000 +#define L2_SHARE_CFG_MP0 0x7f0 +#define L2_SHARE_MODE_OFF BIT(8) + +DECLARE_GLOBAL_DATA_PTR; + +int mtk_pll_early_init(void) +{ + unsigned long pll_rates[] = { + [CLK_APMIXED_ARMPLL] = 1250000000, + [CLK_APMIXED_MAINPLL] = 1120000000, + [CLK_APMIXED_UNIV2PLL] = 1200000000, + [CLK_APMIXED_ETH1PLL] = 500000000, + [CLK_APMIXED_ETH2PLL] = 700000000, + [CLK_APMIXED_SGMIPLL] = 650000000, + }; + struct udevice *dev; + int ret, i; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(mtk_clk_apmixedsys), &dev); + if (ret) + return ret; + + /* configure default rate then enable apmixedsys */ + for (i = 0; i < ARRAY_SIZE(pll_rates); i++) { + struct clk clk = { .id = i, .dev = dev }; + + ret = clk_set_rate(&clk, pll_rates[i]); + if (ret) + return ret; + + ret = clk_enable(&clk); + if (ret) + return ret; + } + + /* setup mcu bus */ + ret = uclass_get_device_by_driver(UCLASS_SYSCON, + DM_GET_DRIVER(mtk_mcucfg), &dev); + if (ret) + return ret; + + return 0; +} + +int mtk_soc_early_init(void) +{ + struct udevice *dev; + int ret; + + /* initialize early clocks */ + ret = mtk_pll_early_init(); + if (ret) + return ret; + + ret = uclass_first_device_err(UCLASS_RAM, &dev); + if (ret) + return ret; + + return 0; +} + +int mach_cpu_init(void) +{ + void __iomem *base; + + base = ioremap(L2_CFG_BASE, L2_CFG_SIZE); + + /* disable L2C shared mode */ + writel(L2_SHARE_MODE_OFF, base + L2_SHARE_CFG_MP0); + + return 0; +} + +int dram_init(void) +{ + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_first_device_err(UCLASS_RAM, &dev); + if (ret) + return ret; + + ret = ram_get_info(dev, &ram); + if (ret) + return ret; + + debug("RAM init base=%lx, size=%x\n", ram.base, ram.size); + + gd->ram_size = ram.size; + + return 0; +} + +int print_cpuinfo(void) +{ + void __iomem *chipid; + u32 hwcode, swver; + + chipid = ioremap(VER_BASE, VER_SIZE); + hwcode = readl(chipid + APHW_CODE); + swver = readl(chipid + APSW_VER); + + printf("CPU: MediaTek MT%04x E%d\n", hwcode, (swver & 0xf) + 1); + + return 0; +} diff --git a/arch/arm/mach-mediatek/mt7629/lowlevel_init.S b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S new file mode 100644 index 0000000..90dd4ea --- /dev/null +++ b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 MediaTek Inc. + */ + +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + +#ifndef CONFIG_SPL_BUILD + /* Return to U-Boot via saved link register */ + mov pc, lr +#else + /* + * Arch timer : + * set CNTFRQ = 20Mhz, set CNTVOFF = 0 + */ + movw r0, #0x2d00 + movt r0, #0x131 + mcr p15, 0, r0, c14, c0, 0 + + /* enable SMP bit */ + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x40 + mcr p15, 0, r0, c1, c0, 1 + + /* if MP core, handle secondary cores */ + mrc p15, 0, r0, c0, c0, 5 + ands r1, r0, #0x40000000 + bne go @ Go if UP + ands r0, r0, #0x0f + beq go @ Go if core0 on primary core tile + b secondary + +go: + /* master CPU */ + mov pc, lr + +secondary: + /* read slave CPU number into r0 firstly */ + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #0x0f + +loop: + dsb + isb + wfi @Zzz... + b loop +#endif +ENDPROC(lowlevel_init) diff --git a/arch/arm/mach-mediatek/spl.c b/arch/arm/mach-mediatek/spl.c new file mode 100644 index 0000000..9b3590f --- /dev/null +++ b/arch/arm/mach-mediatek/spl.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + */ + +#include <clk.h> +#include <common.h> +#include <spl.h> + +#include "init.h" + +void board_init_f(ulong dummy) +{ + int ret; + + ret = spl_early_init(); + if (ret) + hang(); + + /* enable console uart printing */ + preloader_console_init(); + + /* soc early initialization */ + ret = mtk_soc_early_init(); + if (ret) + hang(); +} + +u32 spl_boot_device(void) +{ +#if defined(CONFIG_SPL_SPI_SUPPORT) + return BOOT_DEVICE_SPI; +#elif defined(CONFIG_SPL_MMC_SUPPORT) + return BOOT_DEVICE_MMC1; +#elif defined(CONFIG_SPL_NAND_SUPPORT) + return BOOT_DEVICE_NAND; +#elif defined(CONFIG_SPL_NOR_SUPPORT) + return BOOT_DEVICE_NOR; +#else + return BOOT_DEVICE_NONE; +#endif +} |