mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x

mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
code duplication and only use the nitrogen6x source code to make board code
maintainance easier.

Tested booting a mainline device tree kernel on a mx6qsabrelite board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

7 files changed, 81 insertions, 1189 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 081cf96..0a900dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -601,7 +601,6 @@ Jason Liu <r64343@freescale.com>
 	mx53evk         i.MX53
 	mx53loco        i.MX53
 	mx6qarm2	i.MX6Q
-	mx6qsabrelite   i.MX6Q
 
 Enric Balletbo i Serra <eballetbo@iseebcn.com>
 
@@ -1067,6 +1066,7 @@ Pali Rohár <pali.rohar@gmail.com>
 	nokia_rx51	ARM ARMV7 (OMAP34xx SoC)
 
 Eric Nelson <eric.nelson@boundarydevices.com>
+	mx6qsabrelite		i.MX6Q		1GB
 	nitrogen6dl		i.MX6DL		1GB
 	nitrogen6dl2g		i.MX6DL		2GB
 	nitrogen6q		i.MX6Q/6D	1GB
diff --git a/board/freescale/mx6qsabrelite/README b/board/boundary/nitrogen6x/README.mx6qsabrelite
index 12a9c85..12a9c85 100644
--- a/board/freescale/mx6qsabrelite/README
+++ b/board/boundary/nitrogen6x/README.mx6qsabrelite
diff --git a/board/freescale/mx6qsabrelite/Makefile b/board/freescale/mx6qsabrelite/Makefile
deleted file mode 100644
index cf344e4..0000000
--- a/board/freescale/mx6qsabrelite/Makefile
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).o
-
-COBJS  := mx6qsabrelite.o
-
-SRCS   := $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
-
-$(LIB):        $(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
deleted file mode 100644
index 862bc30..0000000
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ /dev/null
@@ -1,848 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6q_pins.h>
-#include <asm/errno.h>
-#include <asm/gpio.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/boot_mode.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <malloc.h>
-#include <micrel.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
-	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED |		\
-	PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
-
-#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define I2C_PAD_CTRL	(PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
-	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-iomux_v3_cfg_t const uart1_pads[] = {
-	MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const uart2_pads[] = {
-	MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-/* I2C1, SGTL5000 */
-struct i2c_pads_info i2c_pad_info0 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC,
-		.gp = IMX_GPIO_NR(3, 21)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC,
-		.gp = IMX_GPIO_NR(3, 28)
-	}
-};
-
-/* I2C2 Camera, MIPI */
-struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
-		.gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
-		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
-/* I2C3, J15 - RGB connector */
-struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
-		.gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC,
-		.gp = IMX_GPIO_NR(1, 5)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
-		.gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC,
-		.gp = IMX_GPIO_NR(7, 11)
-	}
-};
-
-iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT5__GPIO_7_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const usdhc4_pads[] = {
-	MX6_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const enet_pads1[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__ENET_RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__ENET_RGMII_TD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__ENET_RGMII_TD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__ENET_RGMII_TD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__ENET_RGMII_TD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	/* pin 35 - 1 (PHY_AD2) on reset */
-	MX6_PAD_RGMII_RXC__GPIO_6_30		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 32 - 1 - (MODE0) all */
-	MX6_PAD_RGMII_RD0__GPIO_6_25		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 31 - 1 - (MODE1) all */
-	MX6_PAD_RGMII_RD1__GPIO_6_27		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 28 - 1 - (MODE2) all */
-	MX6_PAD_RGMII_RD2__GPIO_6_28		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 27 - 1 - (MODE3) all */
-	MX6_PAD_RGMII_RD3__GPIO_6_29		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
-	MX6_PAD_RGMII_RX_CTL__GPIO_6_24	| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 42 PHY nRST */
-	MX6_PAD_EIM_D23__GPIO_3_23		| MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const enet_pads2[] = {
-	MX6_PAD_RGMII_RXC__ENET_RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__ENET_RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD1__ENET_RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD2__ENET_RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__ENET_RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-/* Button assignments for J14 */
-static iomux_v3_cfg_t const button_pads[] = {
-	/* Menu */
-	MX6_PAD_NANDF_D1__GPIO_2_1	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-	/* Back */
-	MX6_PAD_NANDF_D2__GPIO_2_2	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-	/* Labelled Search (mapped to Power under Android) */
-	MX6_PAD_NANDF_D3__GPIO_2_3	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-	/* Home */
-	MX6_PAD_NANDF_D4__GPIO_2_4	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-	/* Volume Down */
-	MX6_PAD_GPIO_19__GPIO_4_5	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-	/* Volume Up */
-	MX6_PAD_GPIO_18__GPIO_7_13	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
-	gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
-	gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
-	imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
-	gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
-
-	/* Need delay 10ms according to KSZ9021 spec */
-	udelay(1000 * 10);
-	gpio_set_value(IMX_GPIO_NR(3, 23), 1);
-
-	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
-}
-
-iomux_v3_cfg_t const usb_pads[] = {
-	MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
-	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX6
-int board_ehci_hcd_init(int port)
-{
-	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
-
-	/* Reset USB hub */
-	gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
-	mdelay(2);
-	gpio_set_value(IMX_GPIO_NR(7, 12), 1);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
-	{USDHC3_BASE_ADDR},
-	{USDHC4_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret;
-
-	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-		gpio_direction_input(IMX_GPIO_NR(7, 0));
-		ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
-	} else {
-		gpio_direction_input(IMX_GPIO_NR(2, 6));
-		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
-	}
-
-	return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	s32 status = 0;
-	u32 index = 0;
-
-	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-
-	usdhc_cfg[0].max_bus_width = 4;
-	usdhc_cfg[1].max_bus_width = 4;
-
-	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
-		switch (index) {
-		case 0:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-			break;
-		case 1:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
-		       break;
-	       default:
-			printf("Warning: you configured more USDHC controllers"
-			       "(%d) then supported by the board (%d)\n",
-			       index + 1, CONFIG_SYS_FSL_USDHC_NUM);
-			return status;
-		}
-
-		status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
-	}
-
-	return status;
-}
-#endif
-
-#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t const ecspi1_pads[] = {
-	/* SS1 */
-	MX6_PAD_EIM_D19__GPIO_3_19   | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
-};
-
-void setup_spi(void)
-{
-	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
-					 ARRAY_SIZE(ecspi1_pads));
-}
-#endif
-
-int board_phy_config(struct phy_device *phydev)
-{
-	/* min rx data delay */
-	ksz9021_phy_extended_write(phydev,
-			MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
-	/* min tx data delay */
-	ksz9021_phy_extended_write(phydev,
-			MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
-	/* max rx/tx clock delay, min rx/tx control */
-	ksz9021_phy_extended_write(phydev,
-			MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	uint32_t base = IMX_FEC_BASE;
-	struct mii_dev *bus = NULL;
-	struct phy_device *phydev = NULL;
-	int ret;
-
-	setup_iomux_enet();
-
-#ifdef CONFIG_FEC_MXC
-	bus = fec_get_miibus(base, -1);
-	if (!bus)
-		return 0;
-	/* scan phy 4,5,6,7 */
-	phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
-	if (!phydev) {
-		free(bus);
-		return 0;
-	}
-	printf("using phy at %d\n", phydev->addr);
-	ret  = fec_probe(bis, -1, base, bus, phydev);
-	if (ret) {
-		printf("FEC MXC: %s:failed\n", __func__);
-		free(phydev);
-		free(bus);
-	}
-#endif
-	return 0;
-}
-
-static void setup_buttons(void)
-{
-	imx_iomux_v3_setup_multiple_pads(button_pads,
-					 ARRAY_SIZE(button_pads));
-}
-
-#ifdef CONFIG_CMD_SATA
-
-int setup_sata(void)
-{
-	struct iomuxc_base_regs *const iomuxc_regs
-		= (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
-	int ret = enable_sata_clock();
-	if (ret)
-		return ret;
-
-	clrsetbits_le32(&iomuxc_regs->gpr[13],
-			IOMUXC_GPR13_SATA_MASK,
-			IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
-			|IOMUXC_GPR13_SATA_PHY_7_SATA2M
-			|IOMUXC_GPR13_SATA_SPEED_3G
-			|(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
-			|IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
-			|IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
-			|IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
-			|IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
-			|IOMUXC_GPR13_SATA_PHY_1_SLOW);
-
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_VIDEO_IPUV3)
-
-static iomux_v3_cfg_t const backlight_pads[] = {
-	/* Backlight on RGB connector: J15 */
-	MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
-
-	/* Backlight on LVDS connector: J6 */
-	MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
-};
-
-static iomux_v3_cfg_t const rgb_pads[] = {
-	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
-	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
-	MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
-	MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
-	MX6_PAD_DI0_PIN4__GPIO_4_20,
-	MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
-	MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
-	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
-	MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
-	MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
-	MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
-	MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
-	MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
-	MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
-	MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
-	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
-	MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
-	MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
-	MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
-	MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
-	MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
-	MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
-	MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
-	MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
-	MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
-	MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
-	MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
-	MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
-	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
-};
-
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
-
-
-static int detect_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
-}
-
-static void enable_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	u8 reg;
-	printf("%s: setup HDMI monitor\n", __func__);
-	reg = readb(&hdmi->phy_conf0);
-	reg |= HDMI_PHY_CONF0_PDZ_MASK;
-	writeb(reg, &hdmi->phy_conf0);
-
-	udelay(3000);
-	reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
-	writeb(reg, &hdmi->phy_conf0);
-	udelay(3000);
-	reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
-	writeb(reg, &hdmi->phy_conf0);
-	writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
-}
-
-static int detect_i2c(struct display_info_t const *dev)
-{
-	return ((0 == i2c_set_bus_num(dev->bus))
-		&&
-		(0 == i2c_probe(dev->addr)));
-}
-
-static void enable_lvds(struct display_info_t const *dev)
-{
-	struct iomuxc *iomux = (struct iomuxc *)
-				IOMUXC_BASE_ADDR;
-	u32 reg = readl(&iomux->gpr[2]);
-	reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
-	writel(reg, &iomux->gpr[2]);
-	gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
-}
-
-static void enable_rgb(struct display_info_t const *dev)
-{
-	imx_iomux_v3_setup_multiple_pads(
-		rgb_pads,
-		 ARRAY_SIZE(rgb_pads));
-	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
-}
-
-static struct display_info_t const displays[] = {{
-	.bus	= -1,
-	.addr	= 0,
-	.pixfmt	= IPU_PIX_FMT_RGB24,
-	.detect	= detect_hdmi,
-	.enable	= enable_hdmi,
-	.mode	= {
-		.name           = "HDMI",
-		.refresh        = 60,
-		.xres           = 1024,
-		.yres           = 768,
-		.pixclock       = 15385,
-		.left_margin    = 220,
-		.right_margin   = 40,
-		.upper_margin   = 21,
-		.lower_margin   = 7,
-		.hsync_len      = 60,
-		.vsync_len      = 10,
-		.sync           = FB_SYNC_EXT,
-		.vmode          = FB_VMODE_NONINTERLACED
-} }, {
-	.bus	= 2,
-	.addr	= 0x4,
-	.pixfmt	= IPU_PIX_FMT_LVDS666,
-	.detect	= detect_i2c,
-	.enable	= enable_lvds,
-	.mode	= {
-		.name           = "Hannstar-XGA",
-		.refresh        = 60,
-		.xres           = 1024,
-		.yres           = 768,
-		.pixclock       = 15385,
-		.left_margin    = 220,
-		.right_margin   = 40,
-		.upper_margin   = 21,
-		.lower_margin   = 7,
-		.hsync_len      = 60,
-		.vsync_len      = 10,
-		.sync           = FB_SYNC_EXT,
-		.vmode          = FB_VMODE_NONINTERLACED
-} }, {
-	.bus	= 2,
-	.addr	= 0x38,
-	.pixfmt	= IPU_PIX_FMT_LVDS666,
-	.detect	= detect_i2c,
-	.enable	= enable_lvds,
-	.mode	= {
-		.name           = "wsvga-lvds",
-		.refresh        = 60,
-		.xres           = 1024,
-		.yres           = 600,
-		.pixclock       = 15385,
-		.left_margin    = 220,
-		.right_margin   = 40,
-		.upper_margin   = 21,
-		.lower_margin   = 7,
-		.hsync_len      = 60,
-		.vsync_len      = 10,
-		.sync           = FB_SYNC_EXT,
-		.vmode          = FB_VMODE_NONINTERLACED
-} }, {
-	.bus	= 2,
-	.addr	= 0x48,
-	.pixfmt	= IPU_PIX_FMT_RGB666,
-	.detect	= detect_i2c,
-	.enable	= enable_rgb,
-	.mode	= {
-		.name           = "wvga-rgb",
-		.refresh        = 57,
-		.xres           = 800,
-		.yres           = 480,
-		.pixclock       = 37037,
-		.left_margin    = 40,
-		.right_margin   = 60,
-		.upper_margin   = 10,
-		.lower_margin   = 10,
-		.hsync_len      = 20,
-		.vsync_len      = 10,
-		.sync           = 0,
-		.vmode          = FB_VMODE_NONINTERLACED
-} } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-	} else {
-		printf("unsupported panel %s\n", panel);
-		ret = -EINVAL;
-	}
-	return (0 != ret);
-}
-
-static void setup_display(void)
-{
-	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-
-	int reg;
-
-	/* Turn on LDB0,IPU,IPU DI0 clocks */
-	reg = __raw_readl(&mxc_ccm->CCGR3);
-	reg |=   MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
-		|MXC_CCM_CCGR3_LDB_DI0_MASK;
-	writel(reg, &mxc_ccm->CCGR3);
-
-	/* Turn on HDMI PHY clock */
-	reg = __raw_readl(&mxc_ccm->CCGR2);
-	reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
-	       |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
-	writel(reg, &mxc_ccm->CCGR2);
-
-	/* clear HDMI PHY reset */
-	writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
-
-	/* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
-	writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
-	writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
-
-	/* set LDB0, LDB1 clk select to 011/011 */
-	reg = readl(&mxc_ccm->cs2cdr);
-	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
-		 |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
-	reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
-	      |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
-	writel(reg, &mxc_ccm->cs2cdr);
-
-	reg = readl(&mxc_ccm->cscmr2);
-	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
-	writel(reg, &mxc_ccm->cscmr2);
-
-	reg = readl(&mxc_ccm->chsccdr);
-	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
-		|MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
-		|MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
-	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
-		<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
-	      |(CHSCCDR_PODF_DIVIDE_BY_3
-		<<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
-	      |(CHSCCDR_IPU_PRE_CLK_540M_PFD
-		<<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
-	writel(reg, &mxc_ccm->chsccdr);
-
-	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
-	     |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
-	     |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
-	     |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
-	     |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
-	     |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
-	     |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
-	     |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
-	     |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
-	writel(reg, &iomux->gpr[2]);
-
-	reg = readl(&iomux->gpr[3]);
-	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
-	    | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
-	       <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
-	writel(reg, &iomux->gpr[3]);
-
-	/* backlights off until needed */
-	imx_iomux_v3_setup_multiple_pads(backlight_pads,
-					 ARRAY_SIZE(backlight_pads));
-	gpio_direction_input(LVDS_BACKLIGHT_GP);
-	gpio_direction_input(RGB_BACKLIGHT_GP);
-}
-#endif
-
-int board_early_init_f(void)
-{
-	setup_iomux_uart();
-	setup_buttons();
-
-#if defined(CONFIG_VIDEO_IPUV3)
-	setup_display();
-#endif
-	return 0;
-}
-
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
-	return 1;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_MXC_SPI
-	setup_spi();
-#endif
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-
-#ifdef CONFIG_CMD_SATA
-	setup_sata();
-#endif
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: MX6Q-Sabre Lite\n");
-
-	return 0;
-}
-
-struct button_key {
-	char const	*name;
-	unsigned	gpnum;
-	char		ident;
-};
-
-static struct button_key const buttons[] = {
-	{"back",	IMX_GPIO_NR(2, 2),	'B'},
-	{"home",	IMX_GPIO_NR(2, 4),	'H'},
-	{"menu",	IMX_GPIO_NR(2, 1),	'M'},
-	{"search",	IMX_GPIO_NR(2, 3),	'S'},
-	{"volup",	IMX_GPIO_NR(7, 13),	'V'},
-	{"voldown",	IMX_GPIO_NR(4, 5),	'v'},
-};
-
-/*
- * generate a null-terminated string containing the buttons pressed
- * returns number of keys pressed
- */
-static int read_keys(char *buf)
-{
-	int i, numpressed = 0;
-	for (i = 0; i < ARRAY_SIZE(buttons); i++) {
-		if (!gpio_get_value(buttons[i].gpnum))
-			buf[numpressed++] = buttons[i].ident;
-	}
-	buf[numpressed] = '\0';
-	return numpressed;
-}
-
-static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char envvalue[ARRAY_SIZE(buttons)+1];
-	int numpressed = read_keys(envvalue);
-	setenv("keybd", envvalue);
-	return numpressed == 0;
-}
-
-U_BOOT_CMD(
-	kbd, 1, 1, do_kbd,
-	"Tests for keypresses, sets 'keybd' environment variable",
-	"Returns 0 (true) to shell if key is pressed."
-);
-
-#ifdef CONFIG_PREBOOT
-static char const kbd_magic_prefix[] = "key_magic";
-static char const kbd_command_prefix[] = "key_cmd";
-
-static void preboot_keys(void)
-{
-	int numpressed;
-	char keypress[ARRAY_SIZE(buttons)+1];
-	numpressed = read_keys(keypress);
-	if (numpressed) {
-		char *kbd_magic_keys = getenv("magic_keys");
-		char *suffix;
-		/*
-		 * loop over all magic keys
-		 */
-		for (suffix = kbd_magic_keys; *suffix; ++suffix) {
-			char *keys;
-			char magic[sizeof(kbd_magic_prefix) + 1];
-			sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
-			keys = getenv(magic);
-			if (keys) {
-				if (!strcmp(keys, keypress))
-					break;
-			}
-		}
-		if (*suffix) {
-			char cmd_name[sizeof(kbd_command_prefix) + 1];
-			char *cmd;
-			sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
-			cmd = getenv(cmd_name);
-			if (cmd) {
-				setenv("preboot", cmd);
-				return;
-			}
-		}
-	}
-}
-#endif
-
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
-	/* 4 bit bus width */
-	{"mmc0",	MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
-	{"mmc1",	MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
-	{NULL,		0},
-};
-#endif
-
-int misc_init_r(void)
-{
-#ifdef CONFIG_PREBOOT
-	preboot_keys();
-#endif
-
-#ifdef CONFIG_CMD_BMODE
-	add_board_boot_modes(board_boot_modes);
-#endif
-	return 0;
-}
diff --git a/boards.cfg b/boards.cfg
index 6a368de..f919c53 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -268,7 +268,7 @@ vision2                      arm         armv7       vision2             ttcontr
 cgtqmx6qeval				 arm		 armv7		 cgtqmx6eval		 congatec		mx6		cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
 mx6qarm2                     arm         armv7       mx6qarm2            freescale      mx6		mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
 mx6qsabreauto                arm         armv7       mx6qsabreauto       freescale      mx6		mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q
-mx6qsabrelite                arm         armv7       mx6qsabrelite       freescale      mx6		mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+mx6qsabrelite                arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE
 mx6dlsabresd                 arm         armv7       mx6sabresd          freescale      mx6		mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL
 mx6qsabresd                  arm         armv7       mx6sabresd          freescale      mx6		mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
 mx6slevk                     arm         armv7       mx6slevk            freescale      mx6		mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
deleted file mode 100644
index c7db81d..0000000
--- a/include/configs/mx6qsabrelite.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the Freescale i.MX6Q Sabre Lite board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.		See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MX6
-#define CONFIG_MX6Q
-
-#include "mx6_common.h"
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_MACH_TYPE	3769
-
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
-
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	       UART2_BASE
-
-#define CONFIG_CMD_SF
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
-#define CONFIG_SF_DEFAULT_SPEED 25000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
-#endif
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED		100000
-
-/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_SATA
-/*
- * SATA Configs
- */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_LIBATA
-#endif
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		6
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
-
-/* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MXC_USB_PORT	1
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
-
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
-/* Framebuffer and LCD */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	       1
-#define CONFIG_BAUDRATE			       115200
-
-/* Command definition */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_BOOTDELAY	       1
-
-#define CONFIG_PREBOOT                 ""
-
-#define CONFIG_LOADADDR			       0x12000000
-#define CONFIG_SYS_TEXT_BASE	       0x17800000
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"uimage=uImage\0" \
-	"console=ttymxc1\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx6q-sabrelite.dtb\0" \
-	"fdt_addr=0x11000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${uimage}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loaduimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT	       "MX6QSABRELITE U-Boot > "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE	       256
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	       16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START       0x10000000
-#define CONFIG_SYS_MEMTEST_END	       0x10010000
-#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
-
-#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		       1000
-
-#define CONFIG_CMDLINE_EDITING
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS	       1
-#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			       (1u * 1024 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_IS_IN_MMC
-/* #define CONFIG_ENV_IS_IN_SPI_FLASH */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-#define CONFIG_ENV_OFFSET		(768 * 1024)
-#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
-#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#endif
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
-#endif			       /* __CONFIG_H */
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 74df66c..85eecfc 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -186,6 +186,80 @@
 
 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 
+#if defined(CONFIG_SABRELITE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"uimage=uImage\0" \
+	"console=ttymxc1\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx6q-sabrelite.dtb\0" \
+	"fdt_addr=0x11000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=0\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${uimage}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loaduimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc1\0" \
 	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
@@ -219,6 +293,7 @@
 		"done ; " \
 	"done\0" \
 
+#endif
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
@@ -258,8 +333,11 @@
 
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
-/* #define CONFIG_ENV_IS_IN_MMC */
+#if defined(CONFIG_SABRELITE)
+#define CONFIG_ENV_IS_IN_MMC
+#else
 #define CONFIG_ENV_IS_IN_SPI_FLASH
+#endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)