powerpc: remove orphaned boards mcc200 and prs200

mcc200 and prs200 are old and have no maintainer. Remove the boards.

This also removes the mcc200 specific 1bpp BMP support from
common/lcd.c

Cc: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: York Sun <yorksun@freescale.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>

27 files changed, 7 insertions, 1600 deletions

diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig
index c1fb92a..bd64ea6 100644
--- a/arch/powerpc/cpu/mpc5xxx/Kconfig
+++ b/arch/powerpc/cpu/mpc5xxx/Kconfig
@@ -38,9 +38,6 @@ config TARGET_IPEK01
 config TARGET_JUPITER
 	bool "Support jupiter"
 
-config TARGET_MCC200
-	bool "Support mcc200"
-
 config TARGET_MOTIONPRO
 	bool "Support motionpro"
 
@@ -130,7 +127,6 @@ source "board/jupiter/Kconfig"
 source "board/manroland/hmi1001/Kconfig"
 source "board/manroland/mucmc52/Kconfig"
 source "board/manroland/uc101/Kconfig"
-source "board/mcc200/Kconfig"
 source "board/motionpro/Kconfig"
 source "board/munices/Kconfig"
 source "board/phytec/pcm030/Kconfig"
diff --git a/board/mcc200/Kconfig b/board/mcc200/Kconfig
deleted file mode 100644
index 3b27eeb..0000000
--- a/board/mcc200/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MCC200
-
-config SYS_BOARD
-	default "mcc200"
-
-config SYS_CONFIG_NAME
-	default "mcc200"
-
-endif
diff --git a/board/mcc200/MAINTAINERS b/board/mcc200/MAINTAINERS
deleted file mode 100644
index a59a498..0000000
--- a/board/mcc200/MAINTAINERS
+++ /dev/null
@@ -1,17 +0,0 @@
-MCC200 BOARD
-#M:	-
-S:	Maintained
-F:	board/mcc200/
-F:	include/configs/mcc200.h
-F:	configs/mcc200_defconfig
-F:	configs/mcc200_COM12_defconfig
-F:	configs/mcc200_COM12_highboot_defconfig
-F:	configs/mcc200_COM12_highboot_SDRAM_defconfig
-F:	configs/mcc200_COM12_SDRAM_defconfig
-F:	configs/mcc200_highboot_defconfig
-F:	configs/mcc200_highboot_SDRAM_defconfig
-F:	configs/mcc200_SDRAM_defconfig
-F:	configs/prs200_defconfig
-F:	configs/prs200_DDR_defconfig
-F:	configs/prs200_highboot_defconfig
-F:	configs/prs200_highboot_DDR_defconfig
diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile
deleted file mode 100644
index db3b396..0000000
--- a/board/mcc200/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mcc200.o lcd.o auto_update.o
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
deleted file mode 100644
index 43173ce..0000000
--- a/board/mcc200/auto_update.c
+++ /dev/null
@@ -1,521 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <image.h>
-#include <asm/byteorder.h>
-#include <usb.h>
-#include <part.h>
-
-#ifdef CONFIG_AUTO_UPDATE
-
-#ifndef CONFIG_USB_OHCI
-#error "must define CONFIG_USB_OHCI"
-#endif
-
-#ifndef CONFIG_USB_STORAGE
-#error "must define CONFIG_USB_STORAGE"
-#endif
-
-#ifndef CONFIG_SYS_HUSH_PARSER
-#error "must define CONFIG_SYS_HUSH_PARSER"
-#endif
-
-#if !defined(CONFIG_CMD_FAT)
-#error "must define CONFIG_CMD_FAT"
-#endif
-
-#undef AU_DEBUG
-
-#undef debug
-#ifdef	AU_DEBUG
-#define debug(fmt,args...)	printf (fmt ,##args)
-#else
-#define debug(fmt,args...)
-#endif	/* AU_DEBUG */
-
-/* possible names of files on the USB stick. */
-#define AU_FIRMWARE	"u-boot.img"
-#define AU_KERNEL	"kernel.img"
-#define AU_ROOTFS	"rootfs.img"
-
-struct flash_layout {
-	long start;
-	long end;
-};
-
-/* layout of the FLASH. ST = start address, ND = end address. */
-#define AU_FL_FIRMWARE_ST	0xfC000000
-#define AU_FL_FIRMWARE_ND	0xfC03FFFF
-#define AU_FL_KERNEL_ST		0xfC0C0000
-#define AU_FL_KERNEL_ND		0xfC1BFFFF
-#define AU_FL_ROOTFS_ST		0xFC1C0000
-#define AU_FL_ROOTFS_ND		0xFCFBFFFF
-
-static int au_usb_stor_curr_dev; /* current device */
-
-/* index of each file in the following arrays */
-#define IDX_FIRMWARE	0
-#define IDX_KERNEL	1
-#define IDX_ROOTFS	2
-
-/* max. number of files which could interest us */
-#define AU_MAXFILES 3
-
-/* pointers to file names */
-char *aufile[AU_MAXFILES] = {
-	AU_FIRMWARE,
-	AU_KERNEL,
-	AU_ROOTFS
-};
-
-/* sizes of flash areas for each file */
-long ausize[AU_MAXFILES] = {
-	(AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST,
-	(AU_FL_KERNEL_ND   + 1) - AU_FL_KERNEL_ST,
-	(AU_FL_ROOTFS_ND   + 1) - AU_FL_ROOTFS_ST,
-};
-
-/* array of flash areas start and end addresses */
-struct flash_layout aufl_layout[AU_MAXFILES] = {
-	{ AU_FL_FIRMWARE_ST,	AU_FL_FIRMWARE_ND, },
-	{ AU_FL_KERNEL_ST,	AU_FL_KERNEL_ND,   },
-	{ AU_FL_ROOTFS_ST,	AU_FL_ROOTFS_ND,   },
-};
-
-ulong totsize;
-
-/* where to load files into memory */
-#define LOAD_ADDR ((unsigned char *)0x00200000)
-
-/* the root file system is the largest image */
-#define MAX_LOADSZ ausize[IDX_ROOTFS]
-
-/*i2c address of the keypad status*/
-#define I2C_PSOC_KEYPAD_ADDR	0x53
-
-/* keypad mask */
-#define KEYPAD_ROW	2
-#define KEYPAD_COL	2
-#define KEYPAD_MASK_LO	((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF)
-#define KEYPAD_MASK_HI	((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8)
-
-/* externals */
-extern int fat_register_device(block_dev_desc_t *, int);
-extern int file_fat_detectfs(void);
-extern long file_fat_read(const char *, void *, unsigned long);
-extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int);
-extern int flash_sect_erase(ulong, ulong);
-extern int flash_sect_protect (int, ulong, ulong);
-extern int flash_write (char *, ulong, ulong);
-extern int u_boot_hush_start(void);
-#ifdef CONFIG_PROGRESSBAR
-extern void show_progress(int, int);
-extern void lcd_puts (char *);
-extern void lcd_enable(void);
-#endif
-
-int au_check_cksum_valid(int idx, long nbytes)
-{
-	image_header_t *hdr;
-
-	hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-		puts ("Non legacy image format not supported\n");
-		return -1;
-	}
-#endif
-
-	if (nbytes != image_get_image_size (hdr)) {
-		printf ("Image %s bad total SIZE\n", aufile[idx]);
-		return -1;
-	}
-	/* check the data CRC */
-	if (!image_check_dcrc (hdr)) {
-		printf ("Image %s bad data checksum\n", aufile[idx]);
-		return -1;
-	}
-	return 0;
-}
-
-int au_check_header_valid(int idx, long nbytes)
-{
-	image_header_t *hdr;
-	unsigned long checksum, fsize;
-
-	hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-		puts ("Non legacy image format not supported\n");
-		return -1;
-	}
-#endif
-
-	/* check the easy ones first */
-#undef CHECK_VALID_DEBUG
-#ifdef CHECK_VALID_DEBUG
-	printf("magic %#x %#x ", image_get_magic (hdr), IH_MAGIC);
-	printf("arch %#x %#x ", image_get_arch (hdr), IH_ARCH_ARM);
-	printf("size %#x %#lx ", image_get_data_size (hdr), nbytes);
-	printf("type %#x %#x ", image_get_type (hdr), IH_TYPE_KERNEL);
-#endif
-	if (nbytes < image_get_header_size ()) {
-		printf ("Image %s bad header SIZE\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	if (!image_check_magic (hdr) || !image_check_arch (hdr, IH_ARCH_PPC)) {
-		printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	/* check the hdr CRC */
-	if (!image_check_hcrc (hdr)) {
-		printf ("Image %s bad header checksum\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	/* check the type - could do this all in one gigantic if() */
-	if ((idx == IDX_FIRMWARE) && !image_check_type (hdr, IH_TYPE_FIRMWARE)) {
-		printf ("Image %s wrong type\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	if ((idx == IDX_KERNEL) && !image_check_type (hdr, IH_TYPE_KERNEL)) {
-		printf ("Image %s wrong type\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	if ((idx == IDX_ROOTFS) &&
-			(!image_check_type (hdr, IH_TYPE_RAMDISK) &&
-			!image_check_type (hdr, IH_TYPE_FILESYSTEM))) {
-		printf ("Image %s wrong type\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	/* recycle checksum */
-	checksum = image_get_data_size (hdr);
-
-	fsize = checksum + image_get_header_size ();
-	/* for kernel and ramdisk the image header must also fit into flash */
-	if (idx == IDX_KERNEL || image_check_type (hdr, IH_TYPE_RAMDISK))
-		checksum += image_get_header_size ();
-
-	/* check the size does not exceed space in flash. HUSH scripts */
-	if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
-		printf ("Image %s is bigger than FLASH\n", aufile[idx]);
-		ausize[idx] = 0;
-		return -1;
-	}
-	/* Update with the real filesize */
-	ausize[idx] = fsize;
-
-	return checksum; /* return size to be written to flash */
-}
-
-int au_do_update(int idx, long sz)
-{
-	image_header_t *hdr;
-	char *addr;
-	long start, end;
-	int off, rc;
-	uint nbytes;
-
-	hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-		puts ("Non legacy image format not supported\n");
-		return -1;
-	}
-#endif
-
-	/* execute a script */
-	if (image_check_type (hdr, IH_TYPE_SCRIPT)) {
-		addr = (char *)((char *)hdr + image_get_header_size ());
-		/* stick a NULL at the end of the script, otherwise */
-		/* parse_string_outer() runs off the end. */
-		addr[image_get_data_size (hdr)] = 0;
-		addr += 8;
-		run_command_list(addr, -1, 0);
-		return 0;
-	}
-
-	start = aufl_layout[idx].start;
-	end = aufl_layout[idx].end;
-
-	/* unprotect the address range */
-	/* this assumes that ONLY the firmware is protected! */
-	if (idx == IDX_FIRMWARE) {
-#undef AU_UPDATE_TEST
-#ifdef AU_UPDATE_TEST
-		/* erase it where Linux goes */
-		start = aufl_layout[1].start;
-		end = aufl_layout[1].end;
-#endif
-		flash_sect_protect(0, start, end);
-	}
-
-	/*
-	 * erase the address range.
-	 */
-	debug ("flash_sect_erase(%lx, %lx);\n", start, end);
-	flash_sect_erase(start, end);
-	mdelay(100);
-#ifdef CONFIG_PROGRESSBAR
-	show_progress(end - start, totsize);
-#endif
-
-	/* strip the header - except for the kernel and ramdisk */
-	if (image_check_type (hdr, IH_TYPE_KERNEL) ||
-			image_check_type (hdr, IH_TYPE_RAMDISK)) {
-		addr = (char *)hdr;
-		off = image_get_header_size ();
-		nbytes = image_get_image_size (hdr);
-	} else {
-		addr = (char *)((char *)hdr + image_get_header_size ());
-#ifdef AU_UPDATE_TEST
-		/* copy it to where Linux goes */
-		if (idx == IDX_FIRMWARE)
-			start = aufl_layout[1].start;
-#endif
-		off = 0;
-		nbytes = image_get_data_size (hdr);
-	}
-
-	/* copy the data from RAM to FLASH */
-	debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes);
-	rc = flash_write(addr, start, nbytes);
-	if (rc != 0) {
-		printf("Flashing failed due to error %d\n", rc);
-		return -1;
-	}
-
-#ifdef CONFIG_PROGRESSBAR
-	show_progress(nbytes, totsize);
-#endif
-
-	/* check the data CRC of the copy */
-	if (crc32 (0, (uchar *)(start + off), image_get_data_size (hdr)) !=
-	    image_get_dcrc (hdr)) {
-		printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]);
-		return -1;
-	}
-
-	/* protect the address range */
-	/* this assumes that ONLY the firmware is protected! */
-	if (idx == IDX_FIRMWARE)
-		flash_sect_protect(1, start, end);
-	return 0;
-}
-
-/*
- * this is called from board_init() after the hardware has been set up
- * and is usable. That seems like a good time to do this.
- * Right now the return value is ignored.
- */
-int do_auto_update(void)
-{
-	block_dev_desc_t *stor_dev;
-	long sz;
-	int i, res = 0, cnt, old_ctrlc;
-	char *env;
-	long start, end;
-
-#if 0 /* disable key-press detection to speed up boot-up time */
-	uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
-
-	/*
-	 * Read keypad status
-	 */
-	i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status1, 2);
-	mdelay(500);
-	i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status2, 2);
-
-	/*
-	 * Check keypad
-	 */
-	if ( !(keypad_status1[1] & KEYPAD_MASK_LO) ||
-	      (keypad_status1[1] != keypad_status2[1])) {
-		return 0;
-	}
-
-#endif
-	au_usb_stor_curr_dev = -1;
-	/* start USB */
-	if (usb_stop() < 0) {
-		debug ("usb_stop failed\n");
-		return -1;
-	}
-	if (usb_init() < 0) {
-		debug ("usb_init failed\n");
-		return -1;
-	}
-	/*
-	 * check whether a storage device is attached (assume that it's
-	 * a USB memory stick, since nothing else should be attached).
-	 */
-	au_usb_stor_curr_dev = usb_stor_scan(0);
-	if (au_usb_stor_curr_dev == -1) {
-		debug ("No device found. Not initialized?\n");
-		res = -1;
-		goto xit;
-	}
-	/* check whether it has a partition table */
-	stor_dev = get_dev("usb", 0);
-	if (stor_dev == NULL) {
-		debug ("uknown device type\n");
-		res = -1;
-		goto xit;
-	}
-	if (fat_register_device(stor_dev, 1) != 0) {
-		debug ("Unable to use USB %d:%d for fatls\n",
-			au_usb_stor_curr_dev, 1);
-		res = -1;
-		goto xit;
-	}
-	if (file_fat_detectfs() != 0) {
-		debug ("file_fat_detectfs failed\n");
-	}
-
-	/*
-	 * now check whether start and end are defined using environment
-	 * variables.
-	 */
-	start = -1;
-	end = 0;
-	env = getenv("firmware_st");
-	if (env != NULL)
-		start = simple_strtoul(env, NULL, 16);
-	env = getenv("firmware_nd");
-	if (env != NULL)
-		end = simple_strtoul(env, NULL, 16);
-	if (start >= 0 && end && end > start) {
-		ausize[IDX_FIRMWARE] = (end + 1) - start;
-		aufl_layout[IDX_FIRMWARE].start = start;
-		aufl_layout[IDX_FIRMWARE].end = end;
-	}
-	start = -1;
-	end = 0;
-	env = getenv("kernel_st");
-	if (env != NULL)
-		start = simple_strtoul(env, NULL, 16);
-	env = getenv("kernel_nd");
-	if (env != NULL)
-		end = simple_strtoul(env, NULL, 16);
-	if (start >= 0 && end && end > start) {
-		ausize[IDX_KERNEL] = (end + 1) - start;
-		aufl_layout[IDX_KERNEL].start = start;
-		aufl_layout[IDX_KERNEL].end = end;
-	}
-	start = -1;
-	end = 0;
-	env = getenv("rootfs_st");
-	if (env != NULL)
-		start = simple_strtoul(env, NULL, 16);
-	env = getenv("rootfs_nd");
-	if (env != NULL)
-		end = simple_strtoul(env, NULL, 16);
-	if (start >= 0 && end && end > start) {
-		ausize[IDX_ROOTFS] = (end + 1) - start;
-		aufl_layout[IDX_ROOTFS].start = start;
-		aufl_layout[IDX_ROOTFS].end = end;
-	}
-
-	/* make certain that HUSH is runnable */
-	u_boot_hush_start();
-	/* make sure that we see CTRL-C and save the old state */
-	old_ctrlc = disable_ctrlc(0);
-
-	/* validate the images first */
-	for (i = 0; i < AU_MAXFILES; i++) {
-		ulong imsize;
-		/* just read the header */
-		sz = file_fat_read(aufile[i], LOAD_ADDR, image_get_header_size ());
-		debug ("read %s sz %ld hdr %d\n",
-			aufile[i], sz, image_get_header_size ());
-		if (sz <= 0 || sz < image_get_header_size ()) {
-			debug ("%s not found\n", aufile[i]);
-			ausize[i] = 0;
-			continue;
-		}
-		/* au_check_header_valid() updates ausize[] */
-		if ((imsize = au_check_header_valid(i, sz)) < 0) {
-			debug ("%s header not valid\n", aufile[i]);
-			continue;
-		}
-		/* totsize accounts for image size and flash erase size */
-		totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start));
-	}
-
-#ifdef CONFIG_PROGRESSBAR
-	if (totsize) {
-		lcd_puts(" Update in progress\n");
-		lcd_enable();
-	}
-#endif
-
-	/* just loop thru all the possible files */
-	for (i = 0; i < AU_MAXFILES && totsize; i++) {
-		if (!ausize[i]) {
-			continue;
-		}
-		sz = file_fat_read(aufile[i], LOAD_ADDR, ausize[i]);
-
-		debug ("read %s sz %ld hdr %d\n",
-			aufile[i], sz, image_get_header_size ());
-
-		if (sz != ausize[i]) {
-			printf ("%s: size %ld read %ld?\n", aufile[i], ausize[i], sz);
-			continue;
-		}
-
-		if (sz <= 0 || sz <= image_get_header_size ()) {
-			debug ("%s not found\n", aufile[i]);
-			continue;
-		}
-		if (au_check_cksum_valid(i, sz) < 0) {
-			debug ("%s checksum not valid\n", aufile[i]);
-			continue;
-		}
-		/* this is really not a good idea, but it's what the */
-		/* customer wants. */
-		cnt = 0;
-		do {
-			res = au_do_update(i, sz);
-			/* let the user break out of the loop */
-			if (ctrlc() || had_ctrlc()) {
-				clear_ctrlc();
-				break;
-			}
-			cnt++;
-#ifdef AU_TEST_ONLY
-		} while (res < 0 && cnt < (AU_MAXFILES + 1));
-		if (cnt < (AU_MAXFILES + 1))
-#else
-		} while (res < 0);
-#endif
-	}
-
-	/* restore the old state */
-	disable_ctrlc(old_ctrlc);
-#ifdef CONFIG_PROGRESSBAR
-	if (totsize) {
-		if (!res) {
-			lcd_puts("\n  Update completed\n");
-		} else {
-			lcd_puts("\n   Update error\n");
-		}
-		lcd_enable();
-	}
-#endif
- xit:
-	usb_stop();
-	return res;
-}
-#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
deleted file mode 100644
index c911445..0000000
--- a/board/mcc200/lcd.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <lcd.h>
-#include <mpc5xxx.h>
-#include <malloc.h>
-
-#ifdef CONFIG_LCD
-
-#undef SWAPPED_LCD /* For the previous h/w version */
-/*
- *  The name of the device used for communication
- * with the PSoC.
- */
-#define PSOC_PSC	MPC5XXX_PSC2
-#define PSOC_BAUD	230400UL
-
-#define RTS_ASSERT	1
-#define RTS_NEGATE	0
-#define CTS_ASSERT	1
-#define CTS_NEGATE	0
-
-/*
- * Dimensions in pixels
- */
-#define LCD_WIDTH	160
-#define LCD_HEIGHT	100
-
-/*
- * Dimensions in bytes
- */
-#define LCD_BUF_SIZE	((LCD_WIDTH*LCD_HEIGHT)>>3)
-
-#if LCD_BPP != LCD_MONOCHROME
-#error "MCC200 support only monochrome displays (1 bpp)!"
-#endif
-
-#define PSOC_RETRIES	10	/* each of PSOC_WAIT_TIME */
-#define PSOC_WAIT_TIME	10	/* usec */
-
-#include <video_font.h>
-#define FONT_WIDTH	VIDEO_FONT_WIDTH
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * LCD information
- */
-vidinfo_t panel_info = {
-	LCD_WIDTH, LCD_HEIGHT, LCD_BPP
-};
-
-
-/*
- *  The device we use to communicate with PSoC
- */
-int serial_inited = 0;
-
-/*
- *  Imported functions to support the PSoC protocol
- */
-extern int serial_init_dev (unsigned long dev_base);
-extern void serial_setrts_dev (unsigned long dev_base, int s);
-extern int serial_getcts_dev (unsigned long dev_base);
-extern void serial_putc_raw_dev(unsigned long dev_base, const char c);
-
-/*
- *  Just stubs for our driver, needed for compiling compabilty with
- * the common LCD driver code.
- */
-void lcd_initcolregs (void)
-{
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
-}
-
-/*
- * Function sends the contents of the frame-buffer to the LCD
- */
-void lcd_enable (void)
-{
-	int i, retries, fb_size;
-
-	if (!serial_inited) {
-		unsigned long baud;
-
-		baud = gd->baudrate;
-		gd->baudrate = PSOC_BAUD;
-		serial_init_dev(PSOC_PSC);
-		gd->baudrate = baud;
-		serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
-		serial_inited = 1;
-	}
-
-	/*
-	 *  Implement PSoC communication protocol:
-	 * 1. Assert RTS, wait CTS assertion
-	 * 2. Transmit data
-	 * 3. Negate RTS, wait CTS negation
-	 */
-
-	/* 1 */
-	serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
-	for (retries = PSOC_RETRIES; retries; retries--) {
-		if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT)
-			break;
-		udelay (PSOC_WAIT_TIME);
-	}
-	if (!retries) {
-		printf ("%s Error: PSoC doesn't respond on "
-			"RTS ASSERT\n",	__FUNCTION__);
-	}
-
-	/* 2 */
-	fb_size = panel_info.vl_row * (panel_info.vl_col >> 3);
-
-#if !defined(SWAPPED_LCD)
-	for (i=0; i<fb_size; i++) {
-		serial_putc_raw_dev(PSOC_PSC, ((char *)gd->fb_base)[i]);
-	}
-#else
-    {
-	int x, y, pwidth;
-	char *p = (char *)gd->fb_base;
-
-	pwidth = ((panel_info.vl_col+7) >> 3);
-	for (y=0; y<panel_info.vl_row; y++) {
-		i = y * pwidth;
-		for (x=0; x<pwidth; x+=5) {
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F));
-		}
-	}
-    }
-#endif
-
-	/* 3 */
-	serial_setrts_dev (PSOC_PSC, RTS_NEGATE);
-	for (retries = PSOC_RETRIES; retries; retries--) {
-		if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE)
-			break;
-		udelay (PSOC_WAIT_TIME);
-	}
-
-	return;
-}
-#ifdef CONFIG_PROGRESSBAR
-
-void show_progress (int size, int tot)
-{
-	int cnt;
-	int i;
-	static int rc = 0;
-
-	rc += size;
-
-	cnt = ((LCD_WIDTH/FONT_WIDTH) * rc) / tot;
-
-	rc -= (cnt * tot) / (LCD_WIDTH/FONT_WIDTH);
-
-	for (i = 0; i < cnt; i++) {
-		lcd_putc(0xdc);
-	}
-
-	if (cnt) {
-		lcd_enable(); /* MCC200-specific - send the framebuffer to PSoC */
-	}
-}
-
-#endif
-
-int bmp_display(ulong addr, int x, int y)
-{
-	int ret;
-	bmp_image_t *bmp = (bmp_image_t *)addr;
-
-	if (!bmp) {
-		printf("There is no valid bmp file at the given address\n");
-		return 1;
-	}
-
-	ret = lcd_display_bitmap((ulong)bmp, x, y);
-
-	if ((unsigned long)bmp != addr)
-		free(bmp);
-
-	return ret;
-}
-
-#endif /* CONFIG_LCD */
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
deleted file mode 100644
index 706886b..0000000
--- a/board/mcc200/mcc200.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-
-/* Two MT48LC8M32B2 for 32 MB */
-/* #include "mt48lc8m32b2-6-7.h" */
-
-/* One MT48LC16M32S2 for 64 MB */
-/* #include "mt48lc16m32s2-75.h" */
-#if defined (CONFIG_MCC200_SDRAM)
-#include "mt48lc16m16a2-75.h"
-#else
-#include "mt46v16m16-75.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[];	/* FLASH chips info */
-
-extern int do_auto_update(void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	udelay(10);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *	      is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-	uint svr, pvr;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/*
-	 * On MPC5200B we need to set the special configuration delay in the
-	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-	 *
-	 * "The SDelay should be written to a value of 0x00000004. It is
-	 * required to account for changes caused by normal wafer processing
-	 * parameters."
-	 */
-	svr = get_svr();
-	pvr = get_pvr();
-	if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
-		__asm__ volatile ("sync");
-	}
-
-	return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
-#if defined(CONFIG_PRS200)
-	puts ("Board: PRS200\n");
-#else
-	puts ("Board: MCC200\n");
-#endif
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	ulong flash_sup_end, snum;
-
-	/*
-	 * Adjust flash start and offset to detected values
-	 */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Check if boot FLASH isn't max size
-	 */
-	if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH_BASE)) {
-		/* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(gd->bd->bi_flashstart);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize);
-
-		/*
-		 * Re-check to get correct base address
-		 */
-		flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
-
-		/*
-		 * Re-do flash protection upon new addresses
-		 */
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-		/* Monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-		/* Environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CONFIG_ENV_ADDR,
-			       CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-		/* Redundant environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CONFIG_ENV_ADDR_REDUND,
-			       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-	}
-
-	if (gd->bd->bi_flashsize > (32 << 20)) {
-		/* Unprotect the upper bank of the Flash */
-		*(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6);
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       flash_info[0].start[0] + flash_info[0].size / 2,
-			       (flash_info[0].start[0] - 1) + flash_info[0].size,
-			       &flash_info[0]);
-		*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
-		printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
-		flash_info[0].size = 32 << 20;
-		for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
-			flash_info[0].start[snum] < flash_sup_end;
-			snum++);
-		flash_info[0].sector_count = snum;
-	}
-
-#ifdef CONFIG_AUTO_UPDATE
-	do_auto_update();
-#endif
-	return (0);
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-}
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void)
-{
-	doc_probe (CONFIG_SYS_DOC_BASE);
-}
-#endif
diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h
deleted file mode 100644
index 9068fbf..0000000
--- a/board/mcc200/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h
deleted file mode 100644
index 0133eaa..0000000
--- a/board/mcc200/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h
deleted file mode 100644
index 0133eaa..0000000
--- a/board/mcc200/mt48lc16m32s2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/mcc200/mt48lc8m32b2-6-7.h b/board/mcc200/mt48lc8m32b2-6-7.h
deleted file mode 100644
index 13aebbd..0000000
--- a/board/mcc200/mt48lc8m32b2-6-7.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Configuration Registers for the MT48LC8M32B2 SDRAM on the MPC5200 platform
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE	0x008d0000 /* CL-3 BURST-8 -> Mode Register MBAR + 0x0100 */
-#define SDRAM_CONTROL	0x504f0000 /* Control Register MBAR + 0x0104 */
-#define SDRAM_CONFIG1	0xc2222900 /* Delays between commands -> Configuration Register 1 MBAR + 0x0108 */
-#define SDRAM_CONFIG2	0x88c70000 /* Delays between commands -> Configuration Register 2 MBAR + 0x010C */
diff --git a/common/lcd.c b/common/lcd.c
index 787d80e..37147af 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -881,7 +881,7 @@ static void lcd_display_rle8_bitmap(bmp_image_t *bmp, ushort *cmap, uchar *fb,
 }
 #endif
 
-#if defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
+#if defined(CONFIG_MPC823)
 #define FB_PUT_BYTE(fb, from) *(fb)++ = (255 - *(from)++)
 #else
 #define FB_PUT_BYTE(fb, from) *(fb)++ = *(from)++
@@ -906,9 +906,7 @@ static inline void fb_put_word(uchar **fb, uchar **from)
 
 int lcd_display_bitmap(ulong bmp_image, int x, int y)
 {
-#if !defined(CONFIG_MCC200)
 	ushort *cmap = NULL;
-#endif
 	ushort *cmap_base = NULL;
 	ushort i, j;
 	uchar *fb;
@@ -956,8 +954,6 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	debug("Display-bmp: %d x %d  with %d colors\n",
 		(int)width, (int)height, (int)colors);
 
-#if !defined(CONFIG_MCC200)
-	/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
 	if (bmp_bpix == 8) {
 		cmap = configuration_get_cmap();
 		cmap_base = cmap;
@@ -985,24 +981,6 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 #endif
 		}
 	}
-#endif
-	/*
-	 *  BMP format for Monochrome assumes that the state of a
-	 * pixel is described on a per Bit basis, not per Byte.
-	 *  So, in case of Monochrome BMP we should align widths
-	 * on a byte boundary and convert them from Bit to Byte
-	 * units.
-	 *  Probably, PXA250 and MPC823 process 1bpp BMP images in
-	 * their own ways, so make the converting to be MCC200
-	 * specific.
-	 */
-#if defined(CONFIG_MCC200)
-	if (bpix == 1) {
-		width = ((width + 7) & ~7) >> 3;
-		x     = ((x + 7) & ~7) >> 3;
-		pwidth= ((pwidth + 7) & ~7) >> 3;
-	}
-#endif
 
 	padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width);
 
diff --git a/configs/mcc200_COM12_SDRAM_defconfig b/configs/mcc200_COM12_SDRAM_defconfig
deleted file mode 100644
index be6dbd7..0000000
--- a/configs/mcc200_COM12_SDRAM_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_COM12_defconfig b/configs/mcc200_COM12_defconfig
deleted file mode 100644
index 6ed8635..0000000
--- a/configs/mcc200_COM12_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_COM12_highboot_SDRAM_defconfig b/configs/mcc200_COM12_highboot_SDRAM_defconfig
deleted file mode 100644
index 5f93702..0000000
--- a/configs/mcc200_COM12_highboot_SDRAM_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_COM12_highboot_defconfig b/configs/mcc200_COM12_highboot_defconfig
deleted file mode 100644
index 7abb0a4..0000000
--- a/configs/mcc200_COM12_highboot_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_SDRAM_defconfig b/configs/mcc200_SDRAM_defconfig
deleted file mode 100644
index 37761b5..0000000
--- a/configs/mcc200_SDRAM_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_defconfig b/configs/mcc200_defconfig
deleted file mode 100644
index b6aafec..0000000
--- a/configs/mcc200_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_highboot_SDRAM_defconfig b/configs/mcc200_highboot_SDRAM_defconfig
deleted file mode 100644
index 94d33e5..0000000
--- a/configs/mcc200_highboot_SDRAM_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/mcc200_highboot_defconfig b/configs/mcc200_highboot_defconfig
deleted file mode 100644
index f863dd9..0000000
--- a/configs/mcc200_highboot_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/prs200_DDR_defconfig b/configs/prs200_DDR_defconfig
deleted file mode 100644
index 541fb99..0000000
--- a/configs/prs200_DDR_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="PRS200"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/prs200_defconfig b/configs/prs200_defconfig
deleted file mode 100644
index a094a08..0000000
--- a/configs/prs200_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/prs200_highboot_DDR_defconfig b/configs/prs200_highboot_DDR_defconfig
deleted file mode 100644
index b8eb8d4..0000000
--- a/configs/prs200_highboot_DDR_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/configs/prs200_highboot_defconfig b/configs/prs200_highboot_defconfig
deleted file mode 100644
index 8d68cc0..0000000
--- a/configs/prs200_highboot_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index bd4dd3c..8ba6e0a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,9 +12,11 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
-TOP5200		 powerpc     mpc5200	    -		-	    Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-TOP860		 powerpc     mpc860	    -		-	    Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-TOP9000		 arm	     at91sam9xeXXX  -		-	    Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+PRS200		 powerpc     mpc5200	    -		-
+MCC200		 powerpc     mpc5200	    -		-
+TOP5200		 powerpc     mpc5200	    d58a945	2014-10-28  Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+TOP860		 powerpc     mpc860	    d58a945	2014-10-28  Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+TOP9000		 arm	     at91sam9xeXXX  d58a945	2014-10-28  Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
 TQM8272          powerpc     mpc8260        f06f9a1     2014-10-27  Wolfgang Denk <wd@denx.de>
 TQM8260          powerpc     mpc8260        ccc1950     2014-10-27  Wolfgang Denk <wd@denx.de>
 IDS8247          powerpc     mpc8260        6afb357     2014-10-27  Heiko Schocher <hs@denx.de>
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
deleted file mode 100644
index a317782..0000000
--- a/include/configs/mcc200.h
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * (C) Copyright 2006-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5200
-#define CONFIG_MCC200		1	/* MCC200 board */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000	boot low (standard configuration)
- * 0xFFF00000	boot high
- * 0x00100000	boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFC000000
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz		*/
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
-
-/*
- * Serial console configuration
- *
- *  To select console on the one of 8 external UARTs,
- * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
- * or as 5, 6, 7, or 8 for the second Quad UART.
- * COM11, COM12, COM13, COM14 are located on the second Quad UART.
- *
- *  CONFIG_PSC_CONSOLE must be undefined in this case.
- */
-#if !defined(CONFIG_PRS200)
-/* MCC200 configuration: */
-#ifdef CONFIG_CONSOLE_COM12
-#define CONFIG_QUART_CONSOLE	6	/* console is on UARTF of QUART2	*/
-#else
-#define CONFIG_QUART_CONSOLE	8	/* console is on UARTH of QUART2	*/
-#endif
-#else
-/* PRS200 configuration: */
-#undef CONFIG_QUART_CONSOLE
-#endif /* CONFIG_PRS200 */
-/*
- *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
- * and undefine CONFIG_QUART_CONSOLE.
- */
-#if !defined(CONFIG_PRS200)
-/* MCC200 configuration: */
-#define CONFIG_PSC_CONSOLE	1	/* PSC1 may be COM */
-#define CONFIG_PSC_CONSOLE2	2	/* PSC2 is PSoC */
-#else
-/* PRS200 configuration: */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
-#endif
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_MII		1
-
-#define CONFIG_DOS_PARTITION
-
-/* USB */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-/* automatic software updates (see board/mcc200/auto_update.c) */
-#define CONFIG_AUTO_UPDATE 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_USB
-
-#undef	CONFIG_CMD_NET
-#undef	CONFIG_CMD_NFS
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#ifdef CONFIG_PRS200
-# define CONFIG_SYS__BOARDNAME		"prs200"
-# define CONFIG_SYS__LINUX_CONSOLE	"ttyS0"
-#else
-# define CONFIG_SYS__BOARDNAME		"mcc200"
-# define CONFIG_SYS__LINUX_CONSOLE	"ttyEU5"
-#endif
-
-/* Network */
-#define CONFIG_ETHADDR	00:17:17:ff:00:00
-#define CONFIG_IPADDR	10.76.9.29
-#define CONFIG_SERVERIP	10.76.9.1
-
-#include <version.h> /* For U-Boot version */
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"ubootver=" U_BOOT_VERSION "\0"					\
-	"netdev=eth0\0"							\
-	"hostname=" CONFIG_SYS__BOARDNAME "\0"				\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/mtdblock2 "			\
-		"rootfstype=cramfs\0"					\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addcons=setenv bootargs ${bootargs} "				\
-		"console=${console},${baudrate} "			\
-		"ubootver=${ubootver} board=${board}\0"			\
-	"flash_nfs=run nfsargs addip addcons;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addcons;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};"				\
-		"run nfsargs addip addcons;bootm\0"			\
-	"console=" CONFIG_SYS__LINUX_CONSOLE "\0"				\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/" CONFIG_SYS__BOARDNAME "/uImage\0"		\
-	"load=tftp 200000 /tftpboot/" CONFIG_SYS__BOARDNAME "/u-boot.bin\0"	\
-	"text_base=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"		\
-	"kernel_addr=0xFC0C0000\0"					\
-	"update=protect off ${text_base} +${filesize};"			\
-		"era ${text_base} +${filesize};"			\
-		"cp.b 200000 ${text_base} ${filesize}\0"		\
-	"unlock=yes\0"							\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- *		 0xFE000000 for 32 MB
- *		 0xFF000000 for 16 MB
- *		 0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0xfc000000
-#define CONFIG_SYS_FLASH_SIZE		0x04000000
-
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
-#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection		*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
-
-#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-#if CONFIG_SYS_TEXT_BASE == CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LOWBOOT	1
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xf0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE	/* Size of used area in DPRAM */
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-/* #define CONFIG_MPC5xxx_FEC	1 */
-/* #define CONFIG_MPC5xxx_FEC_MII100 */
-/*
- * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
- */
-/* #define CONFIG_MPC5xxx_FEC_MII10 */
-#define CONFIG_PHY_ADDR		1
-
-/*
- * LCD Splash Screen
- */
-#if !defined(CONFIG_PRS200)
-#define CONFIG_LCD		1
-#define CONFIG_PROGRESSBAR 1
-#endif
-
-#if defined(CONFIG_LCD)
-#define CONFIG_SPLASH_SCREEN	1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-#define LCD_BPP			LCD_MONOCHROME
-#endif
-
-/*
- * GPIO configuration
- */
-/* 0x10000004 = 32MB SDRAM */
-/* 0x90000004 = 64MB SDRAM */
-#if defined(CONFIG_LCD)
-/* set PSC2 in UART mode */
-#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000044
-#else
-#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000004
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG		0x0004fb00
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-
-/* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
-#define CONFIG_SYS_CS2_START		0x80000000
-#define CONFIG_SYS_CS2_SIZE		0x00001000
-#define CONFIG_SYS_CS2_CFG		0x1d300
-
-/* Second Quad UART @0x80010000 */
-#define CONFIG_SYS_CS1_START		0x80010000
-#define CONFIG_SYS_CS1_SIZE		0x00001000
-#define CONFIG_SYS_CS1_CFG		0x1d300
-
-/* Leica - build revision resistors */
-/*
-#define CONFIG_SYS_CS3_START		0x80020000
-#define CONFIG_SYS_CS3_SIZE		0x00000004
-#define CONFIG_SYS_CS3_CFG		0x1d300
-*/
-
-/*
- *  Select one of quarts as a default
- * console. If undefined - PSC console
- * wil be default
- */
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
-
-#define CONFIG_SYS_RESET_ADDRESS	0xff000000
-
-/*
- * QUART Expanders support
- */
-#if defined(CONFIG_QUART_CONSOLE)
-/*
- * We'll use NS16550 chip routines,
- */
-#define CONFIG_SYS_NS16550		1
-#define CONFIG_SYS_NS16550_SERIAL	1
-#define CONFIG_CONS_INDEX	1
-/*
- *  To achieve necessary offset on SC16C554
- * A0-A2 (register select) pins with NS16550
- * functions (in struct NS16550), REG_SIZE
- * should be 4, because A0-A2 pins are connected
- * to DA2-DA4 address bus lines.
- */
-#define CONFIG_SYS_NS16550_REG_SIZE	4
-/*
- * LocalPlus Bus already inited in cpu_init_f(),
- * so can work with QUART's chip selects.
- * One of four SC16C554 UARTs is selected with
- * A3-A4 (DA5-DA6) lines.
- */
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
-#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
-#else
-#error "Wrong QUART expander number."
-#endif
-
-/*
- * SC16C554 chip's external crystal oscillator frequency
- * is 7.3728 MHz
- */
-#define CONFIG_SYS_NS16550_CLK		7372800
-#endif /* CONFIG_QUART_CONSOLE */
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00005000
-
-#define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot	*/
-#define CONFIG_AUTOBOOT_STOP_STR	"432"
-#define CONFIG_SILENT_CONSOLE	1
-
-#endif /* __CONFIG_H */
diff --git a/include/lcd.h b/include/lcd.h
index ea5860c..020d880 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -250,7 +250,7 @@ typedef struct vidinfo {
 	void	*priv;		/* Pointer to driver-specific data */
 } vidinfo_t;
 
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
+#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
 
 extern vidinfo_t panel_info;