Merge tag 'video-for-2019.07-rc3' of git://git.denx.de/u-boot-video

- update for using splashfile instead of location->name
  when loading the splash image from a FIT
- updates for loading internal and external splash data from FIT
- DM_GPIO/DM_VIDEO migration for mx53 cx9020 board
- fix boot issue on mx6sabresd board after DM_VIDEO migration
- increase the max preallocated framebuffer BPP to 32 in ipuv3
  driver to prepare for configurations with higher color depth
- allow to use vidconsole_put_string() in board code for text
  output on LCD displays

15 files changed, 271 insertions, 149 deletions

diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 5ba6174..211ff5f 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -31,6 +31,7 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		ipu0 = &ipu;
 		mmc0 = &esdhc1;
 		mmc1 = &esdhc2;
 		mmc2 = &esdhc3;
@@ -51,6 +52,7 @@
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
+		u-boot,dm-pre-reloc;
 
 		aips@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
@@ -283,5 +285,140 @@
 				status = "disabled";
 			};
 		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+			u-boot,dm-pre-reloc;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
+				clock-names = "tve", "di_sel";
+				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
+		};
+
+		src: src@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+		};
+
+		ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+		};
 	};
 };
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index d038f41..71543a4 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		ipu1 = &ipu2;
+		video1 = &ipu2;
 		spi4 = &ecspi5;
 	};
 
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index c0a9478..83eeb5c 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -33,6 +33,7 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		ipu0 = &ipu1;
+		video0 = &ipu1;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
diff --git a/board/beckhoff/mx53cx9020/Makefile b/board/beckhoff/mx53cx9020/Makefile
index 423a553..7f15fc5 100644
--- a/board/beckhoff/mx53cx9020/Makefile
+++ b/board/beckhoff/mx53cx9020/Makefile
@@ -4,4 +4,4 @@
 # Patrick Bruenn <p.bruenn@beckhoff.com>
 
 obj-y               += mx53cx9020.o
-obj-$(CONFIG_VIDEO) += mx53cx9020_video.o
+obj-$(CONFIG_DM_VIDEO) += mx53cx9020_video.o
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 79d8a62..9450d92 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -8,26 +8,12 @@
  */
 
 #include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/iomux-mx53.h>
-#include <asm/arch/clock.h>
 #include <asm/mach-imx/mx5_video.h>
 #include <ACEX1K.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
 #include <asm/gpio.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <input.h>
-#include <fs.h>
-#include <dm/platform_data/serial_mxc.h>
 
 enum LED_GPIOS {
 	GPIO_SD1_CD = IMX_GPIO_NR(1, 1),
@@ -91,6 +77,9 @@ void weim_cs0_settings(u32 mode)
 
 static void setup_gpio_eim(void)
 {
+	gpio_request(GPIO_C3_STATUS, "GPIO_C3_STATUS");
+	gpio_request(GPIO_C3_DONE, "GPIO_C3_DONE");
+	gpio_request(GPIO_C3_CONFIG, "GPIO_C3_CONFIG");
 	gpio_direction_input(GPIO_C3_STATUS);
 	gpio_direction_input(GPIO_C3_DONE);
 	gpio_direction_output(GPIO_C3_CONFIG, 1);
@@ -100,6 +89,7 @@ static void setup_gpio_eim(void)
 
 static void setup_gpio_sups(void)
 {
+	gpio_request(GPIO_SUPS_INT, "GPIO_SUPS_INT");
 	gpio_direction_input(GPIO_SUPS_INT);
 
 	static const int BLINK_INTERVALL = 50000;
@@ -116,6 +106,16 @@ static void setup_gpio_sups(void)
 
 static void setup_gpio_leds(void)
 {
+	gpio_request(GPIO_LED_SD2_R, "GPIO_LED_SD2_R");
+	gpio_request(GPIO_LED_SD2_B, "GPIO_LED_SD2_B");
+	gpio_request(GPIO_LED_SD2_G, "GPIO_LED_SD2_G");
+	gpio_request(GPIO_LED_SD1_R, "GPIO_LED_SD1_R");
+	gpio_request(GPIO_LED_SD1_B, "GPIO_LED_SD1_B");
+	gpio_request(GPIO_LED_SD1_G, "GPIO_LED_SD1_G");
+	gpio_request(GPIO_LED_PWR_R, "GPIO_LED_PWR_R");
+	gpio_request(GPIO_LED_PWR_B, "GPIO_LED_PWR_B");
+	gpio_request(GPIO_LED_PWR_G, "GPIO_LED_PWR_G");
+
 	gpio_direction_output(GPIO_LED_SD2_R, 0);
 	gpio_direction_output(GPIO_LED_SD2_B, 0);
 	gpio_direction_output(GPIO_LED_SD2_G, 0);
@@ -136,55 +136,6 @@ int board_ehci_hcd_init(int port)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR},
-	{MMC_SDHC2_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret;
-
-	gpio_direction_input(GPIO_SD1_CD);
-	gpio_direction_input(GPIO_SD2_CD);
-
-	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-		ret = !gpio_get_value(GPIO_SD1_CD);
-	else
-		ret = !gpio_get_value(GPIO_SD2_CD);
-
-	return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	u32 index;
-	int ret;
-
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
-	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
-		switch (index) {
-		case 0:
-			break;
-		case 1:
-			break;
-		default:
-			printf("Warning: you configured more ESDHC controller(%d) as supported by the board(2)\n",
-			       CONFIG_SYS_FSL_ESDHC_NUM);
-			return -EINVAL;
-		}
-		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
 
 static int power_init(void)
 {
@@ -212,29 +163,21 @@ static void clock_1GHz(void)
 
 int board_early_init_f(void)
 {
-	setup_gpio_leds();
-	setup_gpio_sups();
-	setup_gpio_eim();
-	setup_iomux_lcd();
 
 	return 0;
 }
 
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
-	return 1;
-}
-
 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 	mxc_set_sata_internal_clock();
 
+	setup_gpio_leds();
+	setup_gpio_sups();
+	setup_gpio_eim();
+	setup_iomux_lcd();
+
 	return 0;
 }
 
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
index 4055bcc..bf47290 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
@@ -8,41 +8,39 @@
  */
 
 #include <common.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
 #include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/video.h>
 
 #define CX9020_DVI_PWD	IMX_GPIO_NR(6, 1)
 
-static struct fb_videomode const vga_640x480 = {
-	.name = "VESA_VGA_640x480",
-	.refresh = 60,
-	.xres = 640,
-	.yres = 480,
-	.pixclock = 39721,	/* picosecond (25.175 MHz) */
-	.left_margin = 40,
-	.right_margin = 60,
-	.upper_margin = 10,
-	.lower_margin = 10,
-	.hsync_len = 20,
-	.vsync_len = 10,
-	.sync = 0,
-	.vmode = FB_VMODE_NONINTERLACED
-};
+struct display_info_t const displays[] = {{
+	.bus	= -1,
+	.addr	= 0,
+	.pixfmt	= IPU_PIX_FMT_RGB24,
+	.detect	= NULL,
+	.enable	= NULL,
+	.mode	= {
+		.name           = "DVI",
+		.refresh = 60,
+		.xres = 640,
+		.yres = 480,
+		.pixclock = 39721,	/* picosecond (25.175 MHz) */
+		.left_margin = 40,
+		.right_margin = 60,
+		.upper_margin = 10,
+		.lower_margin = 10,
+		.hsync_len = 20,
+		.vsync_len = 10,
+		.sync = 0,
+		.vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
 
 void setup_iomux_lcd(void)
 {
 	/* Turn on DVI_PWD */
 	imx_iomux_v3_setup_pad(MX53_PAD_CSI0_DAT15__GPIO6_1);
+	gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD");
 	gpio_direction_output(CX9020_DVI_PWD, 1);
 }
-
-int board_video_skip(void)
-{
-	const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24);
-	if (ret)
-		printf("VESA VG 640x480 cannot be configured: %d\n", ret);
-	return ret;
-}
diff --git a/common/splash_source.c b/common/splash_source.c
index 62763b9..8f276a3 100644
--- a/common/splash_source.c
+++ b/common/splash_source.c
@@ -303,8 +303,12 @@ static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
 {
 	int res;
 	int node_offset;
-	int splash_offset;
-	int splash_size;
+	const char *splash_file;
+	const void *internal_splash_data;
+	size_t internal_splash_size;
+	int external_splash_addr;
+	int external_splash_size;
+	bool is_splash_external = false;
 	struct image_header *img_header;
 	const u32 *fit_header;
 	u32 fit_size;
@@ -335,36 +339,51 @@ static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
 		return -EINVAL;
 	}
 
-	node_offset = fit_image_get_node(fit_header, location->name);
+	/* Get the splash image node */
+	splash_file = env_get("splashfile");
+	if (!splash_file)
+		splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
+
+	node_offset = fit_image_get_node(fit_header, splash_file);
 	if (node_offset < 0) {
 		debug("Could not find splash image '%s' in FIT\n",
-		      location->name);
+		      splash_file);
 		return -ENOENT;
 	}
 
-	res = fit_image_get_data_offset(fit_header, node_offset,
-					&splash_offset);
-	if (res < 0) {
-		printf("Failed to load splash image (err=%d)\n", res);
-		return res;
+	/* Extract the splash data from FIT */
+	/* 1. Test if splash is in FIT internal data. */
+	if (!fit_image_get_data(fit_header, node_offset, &internal_splash_data, &internal_splash_size))
+		memmove((void *)bmp_load_addr, internal_splash_data, internal_splash_size);
+	/* 2. Test if splash is in FIT external data with fixed position. */
+	else if (!fit_image_get_data_position(fit_header, node_offset, &external_splash_addr))
+		is_splash_external = true;
+	/* 3. Test if splash is in FIT external data with offset. */
+	else if (!fit_image_get_data_offset(fit_header, node_offset, &external_splash_addr)) {
+		/* Align data offset to 4-byte boundary */
+		fit_size = ALIGN(fdt_totalsize(fit_header), 4);
+		/* External splash offset means the offset by end of FIT header */
+		external_splash_addr += location->offset + fit_size;
+		is_splash_external = true;
+	} else {
+		printf("Failed to get splash image from FIT\n");
+		return -ENODATA;
 	}
 
-	res = fit_image_get_data_size(fit_header, node_offset, &splash_size);
-	if (res < 0) {
-		printf("Failed to load splash image (err=%d)\n", res);
-		return res;
+	if (is_splash_external) {
+		res = fit_image_get_data_size(fit_header, node_offset, &external_splash_size);
+		if (res < 0) {
+			printf("Failed to get size of splash image (err=%d)\n", res);
+			return res;
+		}
+
+		/* Read in the splash data */
+		location->offset = external_splash_addr;
+		res = splash_storage_read_raw(location, bmp_load_addr, external_splash_size);
+		if (res < 0)
+			return res;
 	}
 
-	/* Align data offset to 4-byte boundrary */
-	fit_size = fdt_totalsize(fit_header);
-	fit_size = (fit_size + 3) & ~3;
-
-	/* Read in the splash data */
-	location->offset = (location->offset + fit_size + splash_offset);
-	res = splash_storage_read_raw(location, bmp_load_addr , splash_size);
-	if (res < 0)
-		return res;
-
 	return 0;
 }
 #endif /* CONFIG_FIT */
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 90ea9a6..b809066 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -24,13 +24,14 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_FPGA_ALTERA=y
 CONFIG_FPGA_CYCLON2=y
+CONFIG_DM=y
 CONFIG_DM_MMC=y
+CONFIG_DM_GPIO=y
 CONFIG_FSL_ESDHC=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX5=y
 CONFIG_MXC_UART=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index d3ed3c4..0fda6fc 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -4,13 +4,13 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_SPL_FIT_PRINT=y
 CONFIG_SPL_LOAD_FIT=y
@@ -63,6 +63,7 @@ CONFIG_OF_LIST="imx6q-sabresd imx6qp-sabresd imx6dl-sabresd"
 CONFIG_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd"
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
diff --git a/doc/README.splashprepare b/doc/README.splashprepare
index f1418de..3cb5b5a 100644
--- a/doc/README.splashprepare
+++ b/doc/README.splashprepare
@@ -26,6 +26,9 @@ screen data is loaded as a file. The name of the splash screen file can be
 controlled with the environment variable "splashfile".
 
 To enable loading the splash image from a FIT image, CONFIG_FIT must be
-enabled. Struct splash_location field 'name' should match the splash image
-name within the FIT and the FIT should start at the 'offset' field address in
-the specified storage.
+enabled. The FIT image has to start at the 'offset' field address in the
+selected splash location. The name of splash image within the FIT shall be
+specified by the environment variable "splashfile".
+
+In case the environment variable "splashfile" is not defined the default name
+'splash.bmp' will be used.
diff --git a/drivers/video/imx/mxc_ipuv3_fb.c b/drivers/video/imx/mxc_ipuv3_fb.c
index 3e38d4b..29ecac4 100644
--- a/drivers/video/imx/mxc_ipuv3_fb.c
+++ b/drivers/video/imx/mxc_ipuv3_fb.c
@@ -678,13 +678,14 @@ static int ipuv3_video_bind(struct udevice *dev)
 	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
 
 	plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
-		     (1 << LCD_MAX_LOG2_BPP) / 8;
+		     (1 << VIDEO_BPP32) / 8;
 
 	return 0;
 }
 
 static const struct udevice_id ipuv3_video_ids[] = {
 	{ .compatible = "fsl,imx6q-ipu" },
+	{ .compatible = "fsl,imx53-ipu" },
 	{ }
 };
 
diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c
index c31303b..af88588 100644
--- a/drivers/video/vidconsole-uclass.c
+++ b/drivers/video/vidconsole-uclass.c
@@ -529,6 +529,20 @@ int vidconsole_put_char(struct udevice *dev, char ch)
 	return 0;
 }
 
+int vidconsole_put_string(struct udevice *dev, const char *str)
+{
+	const char *s;
+	int ret;
+
+	for (s = str; *s; s++) {
+		ret = vidconsole_put_char(dev, *s);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static void vidconsole_putc(struct stdio_dev *sdev, const char ch)
 {
 	struct udevice *dev = sdev->priv;
@@ -541,8 +555,7 @@ static void vidconsole_puts(struct stdio_dev *sdev, const char *s)
 {
 	struct udevice *dev = sdev->priv;
 
-	while (*s)
-		vidconsole_put_char(dev, *s++);
+	vidconsole_put_string(dev, s);
 	video_sync(dev->parent, false);
 }
 
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 9bf5d91..ab61a07 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -159,11 +159,7 @@
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* Framebuffer and LCD */
+#define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_PREBOOT
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
 
 #endif /* __CONFIG_H */
diff --git a/include/video_console.h b/include/video_console.h
index 52a41ac..0936cea 100644
--- a/include/video_console.h
+++ b/include/video_console.h
@@ -215,6 +215,22 @@ int vidconsole_set_row(struct udevice *dev, uint row, int clr);
 int vidconsole_put_char(struct udevice *dev, char ch);
 
 /**
+ * vidconsole_put_string() - Output a string to the current console position
+ *
+ * Outputs a string to the console and advances the cursor. This function
+ * handles wrapping to new lines and scrolling the console. Special
+ * characters are handled also: \n, \r, \b and \t.
+ *
+ * The device always starts with the cursor at position 0,0 (top left). It
+ * can be adjusted manually using vidconsole_position_cursor().
+ *
+ * @dev:	Device to adjust
+ * @str:	String to write
+ * @return 0 if OK, -ve on error
+ */
+int vidconsole_put_string(struct udevice *dev, const char *str);
+
+/**
  * vidconsole_position_cursor() - Move the text cursor
  *
  * @dev:	Device to adjust
diff --git a/test/dm/video.c b/test/dm/video.c
index 6be5def..3151ebb 100644
--- a/test/dm/video.c
+++ b/test/dm/video.c
@@ -97,14 +97,6 @@ static int select_vidconsole(struct unit_test_state *uts, const char *drv_name)
 	return 0;
 }
 
-static void vidconsole_put_string(struct udevice *dev, const char *str)
-{
-	const char *s;
-
-	for (s = str; *s; s++)
-		vidconsole_put_char(dev, *s);
-}
-
 /* Test text output works on the video console */
 static int dm_test_video_text(struct unit_test_state *uts)
 {