diff options
author | Amit Virdi <amit.virdi@st.com> | 2012-05-07 13:00:29 +0530 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-07-07 14:07:39 +0200 |
commit | b5992fac88f8068f4f1af1de2e76889465e45693 (patch) | |
tree | b45d04b77763d821cb52873f8c154e13ad035c4b | |
parent | cf9026deb8d83b00c37b19ec7b63491e9338d49f (diff) | |
download | u-boot-b5992fac88f8068f4f1af1de2e76889465e45693.zip u-boot-b5992fac88f8068f4f1af1de2e76889465e45693.tar.gz u-boot-b5992fac88f8068f4f1af1de2e76889465e45693.tar.bz2 |
st_smi: Change timeout loop implementation
There are two problems in the current timeout loop implementation:
1. In case initial test failing, there will always be a delay of 1 ms
2. The delay duration is not tunable
The new implementation addresses both these limitations.
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r-- | drivers/mtd/st_smi.c | 27 |
1 files changed, 17 insertions, 10 deletions
diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c index 5378b57..75ae9aa 100644 --- a/drivers/mtd/st_smi.c +++ b/drivers/mtd/st_smi.c @@ -102,11 +102,15 @@ static struct flash_device flash_devices[] = { */ static int smi_wait_xfer_finish(int timeout) { - do { + ulong start = get_timer(0); + + while (get_timer(start) < timeout) { if (readl(&smicntl->smi_sr) & TFF) return 0; - udelay(1000); - } while (timeout--); + + /* Try after 10 ms */ + udelay(10); + }; return -1; } @@ -219,16 +223,17 @@ static int smi_read_sr(int bank) static int smi_wait_till_ready(int bank, int timeout) { int sr; + ulong start = get_timer(0); /* One chip guarantees max 5 msec wait here after page writes, but potentially three seconds (!) after page erase. */ - do { + while (get_timer(start) < timeout) { sr = smi_read_sr(bank); if ((sr >= 0) && (!(sr & WIP_BIT))) return 0; - /* Try again after 1m-sec */ - udelay(1000); + /* Try again after 10 usec */ + udelay(10); } while (timeout--); printf("SMI controller is still in wait, timeout=%d\n", timeout); @@ -245,6 +250,7 @@ static int smi_wait_till_ready(int bank, int timeout) static int smi_write_enable(int bank) { u32 ctrlreg1; + u32 start; int timeout = WMODE_TOUT; int sr; @@ -263,14 +269,15 @@ static int smi_write_enable(int bank) /* Restore the CTRL REG1 state */ writel(ctrlreg1, &smicntl->smi_cr1); - do { + start = get_timer(0); + while (get_timer(start) < timeout) { sr = smi_read_sr(bank); if ((sr >= 0) && (sr & (1 << (bank + WM_SHIFT)))) return 0; - /* Try again after 1m-sec */ - udelay(1000); - } while (timeout--); + /* Try again after 10 usec */ + udelay(10); + }; return -1; } |