poplar: sync up device tree with kernel 4.20

It adds missing pinctrl headers, updates clock header and sync up Poplar
device tree with kernel 4.20 release.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

5 files changed, 482 insertions, 35 deletions

diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts
index 964326e..d30f6eb 100644
--- a/arch/arm/dts/hi3798cv200-poplar.dts
+++ b/arch/arm/dts/hi3798cv200-poplar.dts
@@ -1,14 +1,17 @@
-// SPDX-License-Identifier: GPL-2.0
 /*
  * DTS File for HiSilicon Poplar Development Board
  *
  * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
  */
 
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
 #include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
 
 / {
 	model = "HiSilicon Poplar Development Board";
@@ -59,6 +62,33 @@
 			default-state = "off";
 		};
 	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_PCIE0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 7 0>;
+		enable-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+		     &emmc_pins_3 &emmc_pins_4>;
+	fifo-depth = <256>;
+	clock-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
 };
 
 &gmac1 {
@@ -76,17 +106,17 @@
 
 &gpio1 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-E",	"",
+	gpio-line-names = "GPIO-E",	"",
 			  "",		"",
-			  "",		"LS-GPIO-F",
-			  "",		"LS-GPIO-J";
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
 };
 
 &gpio2 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-H",	"LS-GPIO-I",
-			  "LS-GPIO-L",	"LS-GPIO-G",
-			  "LS-GPIO-K",	"",
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
 			  "",		"";
 };
 
@@ -94,15 +124,15 @@
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "LS-GPIO-C",	"",
-			  "",		"LS-GPIO-B";
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
 };
 
 &gpio4 {
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "",		"LS-GPIO-D",
+			  "",		"GPIO-D",
 			  "",		"";
 };
 
@@ -110,7 +140,7 @@
 	status = "okay";
 	gpio-line-names = "",		"USER-LED-1",
 			  "USER-LED-2",	"",
-			  "",		"LS-GPIO-A",
+			  "",		"GPIO-A",
 			  "",		"";
 };
 
@@ -144,6 +174,22 @@
 	status = "okay";
 };
 
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	label = "LS-SPI0";
diff --git a/arch/arm/dts/hi3798cv200.dtsi b/arch/arm/dts/hi3798cv200.dtsi
index 8b9c5ad..7c0fddd 100644
--- a/arch/arm/dts/hi3798cv200.dtsi
+++ b/arch/arm/dts/hi3798cv200.dtsi
@@ -1,12 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0
 /*
  * DTS File for HiSilicon Hi3798cv200 SoC.
  *
  * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset/ti-syscon.h>
 
 / {
@@ -104,6 +108,113 @@
 			#reset-cells = <2>;
 		};
 
+		perictrl: peripheral-controller@8a20000 {
+			compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+				     "simple-mfd";
+			reg = <0x8a20000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8a20000 0x1000>;
+
+			usb2_phy1: usb2-phy@120 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x120 0x4>;
+				clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+				resets = <&crg 0xbc 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy1_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 8>;
+				};
+
+				usb2_phy1_port1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 9>;
+				};
+			};
+
+			usb2_phy2: usb2-phy@124 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x124 0x4>;
+				clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+				resets = <&crg 0xbc 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy2_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 10>;
+				};
+			};
+
+			combphy0: phy@850 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x850 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY0_CLK>;
+				resets = <&crg 0x188 4>;
+				assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+			};
+
+			combphy1: phy@858 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x858 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY1_CLK>;
+				resets = <&crg 0x188 12>;
+				assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+			};
+		};
+
+		pmx0: pinconf@8a21000 {
+			compatible = "pinconf-single";
+			reg = <0x8a21000 0x180>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range 0  8 2  /* GPIO 0 */
+				&range 8  1 0  /* GPIO 1 */
+				&range 9  4 2
+				&range 13 1 0
+				&range 14 1 1
+				&range 15 1 0
+				&range 16 5 0  /* GPIO 2 */
+				&range 21 3 1
+				&range 24 4 1  /* GPIO 3 */
+				&range 28 2 2
+				&range 86 1 1
+				&range 87 1 0
+				&range 30 4 2  /* GPIO 4 */
+				&range 34 3 0
+				&range 37 1 2
+				&range 38 3 2  /* GPIO 6 */
+				&range 41 5 0
+				&range 46 8 1  /* GPIO 7 */
+				&range 54 8 1  /* GPIO 8 */
+				&range 64 7 1  /* GPIO 9 */
+				&range 71 1 0
+				&range 72 6 1  /* GPIO 10 */
+				&range 78 1 0
+				&range 79 1 1
+				&range 80 6 1  /* GPIO 11 */
+				&range 70 2 1
+				&range 88 8 0  /* GPIO 12 */
+			>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
 		uart0: serial@8b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x8b00000 0x1000>;
@@ -190,13 +301,30 @@
 			status = "disabled";
 		};
 
-		emmc: mmc@9830000 {
+		sd0: mmc@9820000 {
 			compatible = "snps,dw-mshc";
+			reg = <0x9820000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_SDIO0_CIU_CLK>,
+				 <&crg HISTB_SDIO0_BIU_CLK>;
+			clock-names = "ciu", "biu";
+			resets = <&crg 0x9c 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		emmc: mmc@9830000 {
+			compatible = "hisilicon,hi3798cv200-dw-mshc";
 			reg = <0x9830000 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HISTB_MMC_CIU_CLK>,
-				 <&crg HISTB_MMC_BIU_CLK>;
-			clock-names = "ciu", "biu";
+				 <&crg HISTB_MMC_BIU_CLK>,
+				 <&crg HISTB_MMC_SAMPLE_CLK>,
+				 <&crg HISTB_MMC_DRV_CLK>;
+			clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+			resets = <&crg 0xa0 4>;
+			reset-names = "reset";
+			status = "disabled";
 		};
 
 		gpio0: gpio@8b20000 {
@@ -207,6 +335,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 8>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -220,6 +349,13 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 8 1
+				&pmx0 1 9 4
+				&pmx0 5 13 1
+				&pmx0 6 14 1
+				&pmx0 7 15 1
+			>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -233,6 +369,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -246,6 +383,12 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 24 4
+				&pmx0 4 28 2
+				&pmx0 6 86 1
+				&pmx0 7 87 1
+			>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -259,6 +402,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -285,6 +429,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -298,6 +443,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -311,6 +457,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -324,6 +471,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -337,6 +485,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -350,6 +499,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -363,6 +513,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
 			clocks = <&crg HISTB_APB_CLK>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -405,5 +556,67 @@
 			clocks = <&sysctrl HISTB_IR_CLK>;
 			status = "disabled";
 		};
+
+		pcie: pcie@9860000 {
+			compatible = "hisilicon,hi3798cv200-pcie";
+			reg = <0x9860000 0x1000>,
+			      <0x0 0x2000>,
+			      <0x2000000 0x01000000>;
+			reg-names = "control", "rc-dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0 15>;
+			num-lanes = <1>;
+			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
+				  0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_PCIE_AUX_CLK>,
+				 <&crg HISTB_PCIE_PIPE_CLK>,
+				 <&crg HISTB_PCIE_SYS_CLK>,
+				 <&crg HISTB_PCIE_BUS_CLK>;
+			clock-names = "aux", "pipe", "sys", "bus";
+			resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+			reset-names = "soft", "sys", "bus";
+			phys = <&combphy1 PHY_TYPE_PCIE>;
+			phy-names = "phy";
+			status = "disabled";
+		};
+
+		ohci: ohci@9880000 {
+			compatible = "generic-ohci";
+			reg = <0x9880000 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_12M_CLK>,
+				 <&crg HISTB_USB2_48M_CLK>;
+			clock-names = "bus", "clk12", "clk48";
+			resets = <&crg 0xb8 12>;
+			reset-names = "bus";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci: ehci@9890000 {
+			compatible = "generic-ehci";
+			reg = <0x9890000 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_PHY_CLK>,
+				 <&crg HISTB_USB2_UTMI_CLK>;
+			clock-names = "bus", "phy", "utmi";
+			resets = <&crg 0xb8 12>,
+				 <&crg 0xb8 16>,
+				 <&crg 0xb8 13>;
+			reset-names = "bus", "phy", "utmi";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/dts/poplar-pinctrl.dtsi b/arch/arm/dts/poplar-pinctrl.dtsi
new file mode 100644
index 0000000..7bb19e4
--- /dev/null
+++ b/arch/arm/dts/poplar-pinctrl.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon Poplar board
+ *
+ * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/* value, enable bits, disable bits, mask */
+#define PINCTRL_PULLDOWN(value, enable, disable, mask) \
+	(value << 13) (enable << 13) (disable << 13) (mask << 13)
+#define PINCTRL_PULLUP(value, enable, disable, mask) \
+	(value << 12) (enable << 12) (disable << 12) (mask << 12)
+#define PINCTRL_SLEW_RATE(value, mask)	  (value << 8) (mask << 8)
+#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4)
+
+&pmx0 {
+	emmc_pins_1: emmc-pins-1 {
+		pinctrl-single,pins = <
+			0x000 MUX_M2
+			0x004 MUX_M2
+			0x008 MUX_M2
+			0x00c MUX_M2
+			0x010 MUX_M2
+			0x014 MUX_M2
+			0x018 MUX_M2
+			0x01c MUX_M2
+			0x024 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0xb, 0xf)
+		>;
+	};
+
+	emmc_pins_2: emmc-pins-2 {
+		pinctrl-single,pins = <
+			0x028 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0x9, 0xf)
+		>;
+	};
+
+	emmc_pins_3: emmc-pins-3 {
+		pinctrl-single,pins = <
+			0x02c MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+
+	emmc_pins_4: emmc-pins-4 {
+		pinctrl-single,pins = <
+			0x030 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(1, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+};
diff --git a/include/dt-bindings/clock/histb-clock.h b/include/dt-bindings/clock/histb-clock.h
index 181c0f0..136de247 100644
--- a/include/dt-bindings/clock/histb-clock.h
+++ b/include/dt-bindings/clock/histb-clock.h
@@ -22,18 +22,18 @@
 #define HISTB_OSC_CLK			0
 #define HISTB_APB_CLK			1
 #define HISTB_AHB_CLK			2
-#define HISTB_UART1_CLK		3
-#define HISTB_UART2_CLK		4
-#define HISTB_UART3_CLK		5
-#define HISTB_I2C0_CLK		6
-#define HISTB_I2C1_CLK		7
-#define HISTB_I2C2_CLK		8
-#define HISTB_I2C3_CLK		9
-#define HISTB_I2C4_CLK		10
-#define HISTB_I2C5_CLK		11
-#define HISTB_SPI0_CLK		12
-#define HISTB_SPI1_CLK		13
-#define HISTB_SPI2_CLK		14
+#define HISTB_UART1_CLK			3
+#define HISTB_UART2_CLK			4
+#define HISTB_UART3_CLK			5
+#define HISTB_I2C0_CLK			6
+#define HISTB_I2C1_CLK			7
+#define HISTB_I2C2_CLK			8
+#define HISTB_I2C3_CLK			9
+#define HISTB_I2C4_CLK			10
+#define HISTB_I2C5_CLK			11
+#define HISTB_SPI0_CLK			12
+#define HISTB_SPI1_CLK			13
+#define HISTB_SPI2_CLK			14
 #define HISTB_SCI_CLK			15
 #define HISTB_FMC_CLK			16
 #define HISTB_MMC_BIU_CLK		17
@@ -43,7 +43,7 @@
 #define HISTB_SDIO0_BIU_CLK		21
 #define HISTB_SDIO0_CIU_CLK		22
 #define HISTB_SDIO0_DRV_CLK		23
-#define HISTB_SDIO0_SAMPLE_CLK	24
+#define HISTB_SDIO0_SAMPLE_CLK		24
 #define HISTB_PCIE_AUX_CLK		25
 #define HISTB_PCIE_PIPE_CLK		26
 #define HISTB_PCIE_SYS_CLK		27
@@ -53,14 +53,30 @@
 #define HISTB_ETH1_MAC_CLK		31
 #define HISTB_ETH1_MACIF_CLK		32
 #define HISTB_COMBPHY1_CLK		33
-
+#define HISTB_USB2_BUS_CLK		34
+#define HISTB_USB2_PHY_CLK		35
+#define HISTB_USB2_UTMI_CLK		36
+#define HISTB_USB2_12M_CLK		37
+#define HISTB_USB2_48M_CLK		38
+#define HISTB_USB2_OTG_UTMI_CLK		39
+#define HISTB_USB2_PHY1_REF_CLK		40
+#define HISTB_USB2_PHY2_REF_CLK		41
+#define HISTB_COMBPHY0_CLK		42
+#define HISTB_USB3_BUS_CLK		43
+#define HISTB_USB3_UTMI_CLK		44
+#define HISTB_USB3_PIPE_CLK		45
+#define HISTB_USB3_SUSPEND_CLK		46
+#define HISTB_USB3_BUS_CLK1		47
+#define HISTB_USB3_UTMI_CLK1		48
+#define HISTB_USB3_PIPE_CLK1		49
+#define HISTB_USB3_SUSPEND_CLK1		50
 
 /* clocks provided by mcu CRG */
-#define HISTB_MCE_CLK	1
-#define HISTB_IR_CLK	2
-#define HISTB_TIMER01_CLK	3
-#define HISTB_LEDC_CLK	4
-#define HISTB_UART0_CLK	5
-#define HISTB_LSADC_CLK	6
+#define HISTB_MCE_CLK			1
+#define HISTB_IR_CLK			2
+#define HISTB_TIMER01_CLK		3
+#define HISTB_LEDC_CLK			4
+#define HISTB_UART0_CLK			5
+#define HISTB_LSADC_CLK			6
 
 #endif	/* __DTS_HISTB_CLOCK_H */
diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h
new file mode 100644
index 0000000..0359bfd
--- /dev/null
+++ b/include/dt-bindings/pinctrl/hisi.h
@@ -0,0 +1,74 @@
+/*
+ * This header provides constants for hisilicon pinctrl bindings.
+ *
+ * Copyright (c) 2015 Hisilicon Limited.
+ * Copyright (c) 2015 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_HISI_H
+#define _DT_BINDINGS_PINCTRL_HISI_H
+
+/* iomg bit definition */
+#define MUX_M0		0
+#define MUX_M1		1
+#define MUX_M2		2
+#define MUX_M3		3
+#define MUX_M4		4
+#define MUX_M5		5
+#define MUX_M6		6
+#define MUX_M7		7
+
+/* iocg bit definition */
+#define PULL_MASK	(3)
+#define PULL_DIS	(0)
+#define PULL_UP		(1 << 0)
+#define PULL_DOWN	(1 << 1)
+
+/* drive strength definition */
+#define DRIVE_MASK	(7 << 4)
+#define DRIVE1_02MA	(0 << 4)
+#define DRIVE1_04MA	(1 << 4)
+#define DRIVE1_08MA	(2 << 4)
+#define DRIVE1_10MA	(3 << 4)
+#define DRIVE2_02MA	(0 << 4)
+#define DRIVE2_04MA	(1 << 4)
+#define DRIVE2_08MA	(2 << 4)
+#define DRIVE2_10MA	(3 << 4)
+#define DRIVE3_04MA	(0 << 4)
+#define DRIVE3_08MA	(1 << 4)
+#define DRIVE3_12MA	(2 << 4)
+#define DRIVE3_16MA	(3 << 4)
+#define DRIVE3_20MA	(4 << 4)
+#define DRIVE3_24MA	(5 << 4)
+#define DRIVE3_32MA	(6 << 4)
+#define DRIVE3_40MA	(7 << 4)
+#define DRIVE4_02MA	(0 << 4)
+#define DRIVE4_04MA	(2 << 4)
+#define DRIVE4_08MA	(4 << 4)
+#define DRIVE4_10MA	(6 << 4)
+
+/* drive strength definition for hi3660 */
+#define DRIVE6_MASK	(15 << 4)
+#define DRIVE6_04MA	(0 << 4)
+#define DRIVE6_12MA	(4 << 4)
+#define DRIVE6_19MA	(8 << 4)
+#define DRIVE6_27MA	(10 << 4)
+#define DRIVE6_32MA	(15 << 4)
+#define DRIVE7_02MA	(0 << 4)
+#define DRIVE7_04MA	(1 << 4)
+#define DRIVE7_06MA	(2 << 4)
+#define DRIVE7_08MA	(3 << 4)
+#define DRIVE7_10MA	(4 << 4)
+#define DRIVE7_12MA	(5 << 4)
+#define DRIVE7_14MA	(6 << 4)
+#define DRIVE7_16MA	(7 << 4)
+#endif