diff options
author | Tom Rini <trini@konsulko.com> | 2020-06-16 19:06:10 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-06-26 10:29:05 -0400 |
commit | 11af95a02a7649e2c59da63b1fbee73539fcb974 (patch) | |
tree | 5d0ddcb87d43db8e7da85840e775533029c43195 | |
parent | b120665fe9616707d16c0df19ace659fbe1fd0dd (diff) | |
download | u-boot-11af95a02a7649e2c59da63b1fbee73539fcb974.zip u-boot-11af95a02a7649e2c59da63b1fbee73539fcb974.tar.gz u-boot-11af95a02a7649e2c59da63b1fbee73539fcb974.tar.bz2 |
Convert CONFIG_BAUDRATE to Kconfig
This converts the following to Kconfig:
CONFIG_BAUDRATE
Signed-off-by: Tom Rini <trini@konsulko.com>
27 files changed, 0 insertions, 50 deletions
@@ -670,11 +670,6 @@ The following options need to be configured: Define this variable to enable hw flow control in serial driver. Current user of this option is drivers/serial/nsl16550.c driver -- Console Baudrate: - CONFIG_BAUDRATE - in bps - Select one of the baudrates listed in - CONFIG_SYS_BAUDRATE_TABLE, see below. - - Autoboot Command: CONFIG_BOOTCOMMAND Only needed when CONFIG_BOOTDELAY is enabled; diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index 08d34db..6dad821 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -103,9 +103,6 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE SZ_2G /* 2 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Monitor Command Prompt */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/bcm_northstar2.h b/include/configs/bcm_northstar2.h index 45dc7b2..fbfab28 100644 --- a/include/configs/bcm_northstar2.h +++ b/include/configs/bcm_northstar2.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_NS16550_COM2 0x66110000 #define CONFIG_SYS_NS16550_COM3 0x66120000 #define CONFIG_SYS_NS16550_COM4 0x66130000 -#define CONFIG_BAUDRATE 115200 /* console configuration */ #define CONFIG_SYS_CBSIZE SZ_1K diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 24569f7..01cfed0 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -115,7 +115,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Serial console configuration. */ -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 7d00707..8d72229 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -135,9 +135,6 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Monitor Command Prompt */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 00e5c8f..0c36ea6 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -112,8 +112,6 @@ */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 - #define CONFIG_HOSTNAME "ccdc" #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_BOOTFILE "ccdc.img" diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 5bfdf40..0b6617f 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -62,7 +62,6 @@ /* UART */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_BAUDRATE 115200 /* USB Configs */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/display5.h b/include/configs/display5.h index 3348ecc..94baa65 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -66,7 +66,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 #ifndef CONFIG_BOOTCOMMAND #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \ diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 001e9d3..bde168d 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -11,9 +11,6 @@ /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ #define CONFIG_SYS_CLK_FREQ 66666666 -/* Serial Console */ -#define CONFIG_BAUDRATE 115200 - /* Miscellaneous */ #define CONFIG_SYS_PBSIZE 256 #define CONFIG_CMDLINE_TAG diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index f71efd4..33a3014 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -175,8 +175,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ -#define CONFIG_BAUDRATE 115200 - #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 8324767..fd68c4f 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -175,9 +175,6 @@ #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 89d7ada..9808e72 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -163,9 +163,6 @@ /* LPDDR4 board total DDR is 6GB, DDR4 board total DDR is 4 GB */ #define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a58f68c..b442b48 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -175,9 +175,6 @@ /* LPDDR4 board total DDR is 3GB */ #define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 46c60aa..ec2ed7c 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -104,8 +104,6 @@ #endif #define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 115200 - /* I2C */ #ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index f9040e6..44f2dc8 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -48,7 +48,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* Miscellaneous configurable options */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 596f14b..3ea1675 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -64,7 +64,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 5ab9244..a8636d3 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -78,7 +78,6 @@ (void *)CONFIG_SYS_SERIAL1, \ (void *)CONFIG_SYS_SERIAL2, \ (void *)CONFIG_SYS_SERIAL3 } -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* MC firmware */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index bb6d82d..2ee6661 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -33,7 +33,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 /* Command definition */ diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index b774b16..0a28d61 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -27,7 +27,6 @@ #else #error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx) #endif -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16) diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 942b7dd..5e05b8c 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -39,7 +39,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CACHELINE_SIZE 64 diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h index f77a5fa..98b5a96 100644 --- a/include/configs/owl-common.h +++ b/include/configs/owl-common.h @@ -29,9 +29,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00) -/* UART Definitions */ -#define CONFIG_BAUDRATE 115200 - /* Console configuration */ #define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ #define CONFIG_SYS_MAXARGS 64 diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index d524f3c..e4b14c5 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -73,6 +73,5 @@ #define CONFIG_SYS_NS16550_COM4 UART3_BASE #define CONFIG_SYS_NS16550_COM5 UART4_BASE #define CONFIG_SYS_NS16550_COM6 UART5_BASE -#define CONFIG_BAUDRATE 115200 #endif /* ! __CONFIG_PDU001_H */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 2ae13b3..7b7d633 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -150,8 +150,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ (PHYS_SDRAM_SIZE >> 1)) -#define CONFIG_BAUDRATE 115200 - #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 51177f4..34235b5 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -41,7 +41,6 @@ #define CORTINA_SERIAL_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1} -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_SERIAL0 PER_UART0_CFG #define CONFIG_SYS_SERIAL1 PER_UART1_CFG diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index d0c9e5c..8f1d508 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -9,7 +9,6 @@ #include "rockchip-common.h" #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index e57d0ef..f178a06 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xff000000 -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h index c211276..a210449 100644 --- a/include/configs/wb50n.h +++ b/include/configs/wb50n.h @@ -72,8 +72,6 @@ #define CONFIG_BOOTARGS \ "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" -#define CONFIG_BAUDRATE 115200 - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ |