firmware: remove FW_TEXT_START

Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

15 files changed, 15 insertions, 39 deletions

diff --git a/docs/firmware/fw.md b/docs/firmware/fw.md
index 2f4deb5..3cc0262 100644
--- a/docs/firmware/fw.md
+++ b/docs/firmware/fw.md
@@ -61,8 +61,6 @@ Firmware Configuration and Compilation
 All firmware types support the following common compile time configuration
 parameters:
 
-* **FW_TEXT_START** - Defines the execution address of the OpenSBI firmware.
-  This configuration parameter is mandatory.
 * **FW_FDT_PATH** - Path to an external flattened device tree binary file to
   be embedded in the *.rodata* section of the final firmware. If this option
   is not provided then the firmware will expect the FDT to be passed as an
diff --git a/docs/firmware/fw_jump.md b/docs/firmware/fw_jump.md
index 2ee6b29..66be016 100644
--- a/docs/firmware/fw_jump.md
+++ b/docs/firmware/fw_jump.md
@@ -35,7 +35,7 @@ follows:
   At least one of *FW_JUMP_ADDR* and *FW_JUMP_OFFSET* (see below) should be
   defined. Compilation errors will result from not defining one of them.
 
-* **FW_JUMP_OFFSET** - Address offset from the *FW_TEXT_START* where the
+* **FW_JUMP_OFFSET** - Address offset from the opensbi load address where the
   entry point of the next booting stage is located. This offset is used as
   relocatable address of the next booting stage entry point. If *FW_JUMP_ADDR*
   is also defined, the firmware will prefer *FW_JUMP_ADDR*.
@@ -62,7 +62,7 @@ follows:
   echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR
   ```
 
-* **FW_JUMP_FDT_OFFSET** - Address offset from the *FW_TEXT_START* where
+* **FW_JUMP_FDT_OFFSET** - Address offset from the opensbi load address where
   the FDT will be passed to the next booting stage. This offset is used
   as relocatable address of the FDT passed to the next booting stage. If
   *FW_JUMP_FDT_ADDR* is also defined, the firmware will prefer
diff --git a/docs/firmware/fw_payload.md b/docs/firmware/fw_payload.md
index a67fc50..d25be60 100644
--- a/docs/firmware/fw_payload.md
+++ b/docs/firmware/fw_payload.md
@@ -36,8 +36,8 @@ options. These configuration parameters can be defined using either the top
 level `make` command line or the target platform *objects.mk* configuration
 file. The parameters currently defined are as follows:
 
-* **FW_PAYLOAD_OFFSET** - Offset from *FW_TEXT_START* where the payload binary
-  will be linked in the final *FW_PAYLOAD* firmware binary image. This
+* **FW_PAYLOAD_OFFSET** - Offset from the opensbi load address where the payload
+  binary will be linked in the final *FW_PAYLOAD* firmware binary image. This
   configuration parameter is mandatory if *FW_PAYLOAD_ALIGN* is not defined.
   Compilation errors will result from an incorrect definition of
   *FW_PAYLOAD_OFFSET* or of *FW_PAYLOAD_ALIGN*, or if neither of these
@@ -62,7 +62,7 @@ file. The parameters currently defined are as follows:
   firmware will pass the FDT address passed by the previous booting stage
   to the next booting stage.
 
-* **FW_PAYLOAD_FDT_OFFSET** - Address offset from the *FW_TEXT_START* where
+* **FW_PAYLOAD_FDT_OFFSET** - Address offset from the opensbi load address where
   the FDT will be passed to the next booting stage. This offset is used as
   relocatable address of the FDT passed to the next booting stage. If
   *FW_PAYLOAD_FDT_ADDR* is also defined, the firmware will prefer *FW_PAYLOAD_FDT_ADDR*.
diff --git a/docs/platform/generic.md b/docs/platform/generic.md
index c29eb04..709b436 100644
--- a/docs/platform/generic.md
+++ b/docs/platform/generic.md
@@ -9,10 +9,9 @@ boards.
 
 By default, the generic FDT platform makes following assumptions:
 
-1. platform FW_TEXT_START is 0x80000000
-2. platform features are default
-3. platform stack size is default
-4. platform has no quirks or work-arounds
+1. platform features are default
+2. platform stack size is default
+3. platform has no quirks or work-arounds
 
 The above assumptions (except 1) can be overridden by adding special platform
 callbacks which will be called based on FDT root node compatible string.
@@ -33,10 +32,6 @@ Users of the generic FDT platform will have to ensure that:
 To build the platform-specific library and firmware images, provide the
 *PLATFORM=generic* parameter to the top level `make` command.
 
-For custom FW_TEXT_START, we can build the platform-specific library and
-firmware images by passing *PLATFORM=generic FW_TEXT_START=<custom_text_start>*
-parameter to the top level `make` command.
-
 Platform Options
 ----------------
 
diff --git a/firmware/fw_base.S b/firmware/fw_base.S
index b950c0b..9f995a2 100644
--- a/firmware/fw_base.S
+++ b/firmware/fw_base.S
@@ -53,9 +53,7 @@ _try_lottery:
 	bnez	a6, _wait_for_boot_hart
 
 	/* relocate the global table content */
-	li	t0, FW_TEXT_START	/* link start */
-	lla	t1, _fw_start		/* load start */
-	sub	t2, t1, t0		/* load offset */
+	lla	t2, _fw_start
 	lla	t0, __rel_dyn_start
 	lla	t1, __rel_dyn_end
 	beq	t0, t1, _relocate_done
diff --git a/firmware/fw_base.ldS b/firmware/fw_base.ldS
index fb47984..9d11db5 100644
--- a/firmware/fw_base.ldS
+++ b/firmware/fw_base.ldS
@@ -7,8 +7,7 @@
  *   Anup Patel <anup.patel@wdc.com>
  */
 
-	. = FW_TEXT_START;
-	/* Don't add any section between FW_TEXT_START and _fw_start */
+	/* Don't add any section before _fw_start */
 	PROVIDE(_fw_start = .);
 
 	. = ALIGN(0x1000); /* Need this to create proper sections */
diff --git a/firmware/fw_payload.elf.ldS b/firmware/fw_payload.elf.ldS
index f1a544b..94e1ac6 100644
--- a/firmware/fw_payload.elf.ldS
+++ b/firmware/fw_payload.elf.ldS
@@ -15,7 +15,7 @@ SECTIONS
 	#include "fw_base.ldS"
 
 #ifdef FW_PAYLOAD_OFFSET
-	. = FW_TEXT_START + FW_PAYLOAD_OFFSET;
+	. = FW_PAYLOAD_OFFSET;
 #else
 	. = ALIGN(FW_PAYLOAD_ALIGN);
 #endif
diff --git a/firmware/objects.mk b/firmware/objects.mk
index e6b364b..a51ff65 100644
--- a/firmware/objects.mk
+++ b/firmware/objects.mk
@@ -13,10 +13,6 @@ firmware-cflags-y +=
 firmware-asflags-y +=
 firmware-ldflags-y +=
 
-ifdef FW_TEXT_START
-firmware-genflags-y += -DFW_TEXT_START=$(FW_TEXT_START)
-endif
-
 ifdef FW_FDT_PATH
 firmware-genflags-y += -DFW_FDT_PATH=\"$(FW_FDT_PATH)\"
 ifdef FW_FDT_PADDING
diff --git a/firmware/payloads/test.elf.ldS b/firmware/payloads/test.elf.ldS
index 2328a1b..08e008f 100644
--- a/firmware/payloads/test.elf.ldS
+++ b/firmware/payloads/test.elf.ldS
@@ -13,7 +13,7 @@ ENTRY(_start)
 SECTIONS
 {
 #ifdef FW_PAYLOAD_OFFSET
-	. = FW_TEXT_START + FW_PAYLOAD_OFFSET;
+	. = FW_PAYLOAD_OFFSET;
 #else
 	. = ALIGN(FW_PAYLOAD_ALIGN);
 #endif
diff --git a/platform/fpga/ariane/objects.mk b/platform/fpga/ariane/objects.mk
index 83581ac..d1177f4 100644
--- a/platform/fpga/ariane/objects.mk
+++ b/platform/fpga/ariane/objects.mk
@@ -17,7 +17,6 @@ platform-objs-y += platform.o
 PLATFORM_RISCV_XLEN = 64
 
 # Blobs to build
-FW_TEXT_START=0x80000000
 FW_JUMP=n
 
 ifeq ($(PLATFORM_RISCV_XLEN), 32)
diff --git a/platform/fpga/openpiton/objects.mk b/platform/fpga/openpiton/objects.mk
index c8c345a..1a0ce0c 100644
--- a/platform/fpga/openpiton/objects.mk
+++ b/platform/fpga/openpiton/objects.mk
@@ -16,7 +16,6 @@ platform-objs-y += platform.o
 PLATFORM_RISCV_XLEN = 64
 
 # Blobs to build
-FW_TEXT_START=0x80000000
 FW_JUMP=n
 
 ifeq ($(PLATFORM_RISCV_XLEN), 32)
diff --git a/platform/generic/objects.mk b/platform/generic/objects.mk
index 85aa723..c215935 100644
--- a/platform/generic/objects.mk
+++ b/platform/generic/objects.mk
@@ -15,14 +15,13 @@ platform-ldflags-y =
 
 # Command for platform specific "make run"
 platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M virt -m 256M \
-  -nographic -bios $(build_dir)/platform/generic/firmware/fw_payload.elf
+  -nographic -bios $(build_dir)/platform/generic/firmware/fw_payload.bin
 
 # Objects to build
 platform-objs-y += platform.o
 platform-objs-y += platform_override_modules.o
 
 # Blobs to build
-FW_TEXT_START=0x80000000
 FW_DYNAMIC=y
 FW_JUMP=y
 ifeq ($(PLATFORM_RISCV_XLEN), 32)
diff --git a/platform/kendryte/k210/objects.mk b/platform/kendryte/k210/objects.mk
index 1bfb898..efac3d2 100644
--- a/platform/kendryte/k210/objects.mk
+++ b/platform/kendryte/k210/objects.mk
@@ -21,6 +21,5 @@ platform-varprefix-k210.o = dt_k210
 platform-padding-k210.o = 2048
 
 # Blobs to build
-FW_TEXT_START=0x80000000
 FW_PAYLOAD=y
 FW_PAYLOAD_ALIGN=0x1000
diff --git a/platform/nuclei/ux600/objects.mk b/platform/nuclei/ux600/objects.mk
index 7c429e0..2753a7f 100644
--- a/platform/nuclei/ux600/objects.mk
+++ b/platform/nuclei/ux600/objects.mk
@@ -22,7 +22,6 @@ platform-runcmd = xl_spike \
 platform-objs-y += platform.o
 
 # Blobs to build
-FW_TEXT_START=0xA0000000
 FW_DYNAMIC=y
 FW_JUMP=y
 
diff --git a/platform/template/objects.mk b/platform/template/objects.mk
index b143cbc..f240a55 100644
--- a/platform/template/objects.mk
+++ b/platform/template/objects.mk
@@ -41,9 +41,6 @@ platform-objs-y += platform.o
 #
 # platform-objs-y += <dt file name>.o
 
-# Firmware load address configuration. This is mandatory.
-FW_TEXT_START=0x80000000
-
 # Optional parameter for path to external FDT
 # FW_FDT_PATH="path to platform flattened device tree file"
 
@@ -69,8 +66,7 @@ FW_JUMP=<y|n>
 # endif
 # FW_JUMP_FDT_OFFSET=0x2200000
 #
-# You can use fixed address for jump firmware as an alternative option,
-# but this may fail when setting wrong FW_TEXT_START. Use with caution.
+# You can use fixed address for jump firmware as an alternative option.
 # SBI will prefer "<X>_ADDR" if both "<X>_ADDR" and "<X>_OFFSET" are
 # defined
 # ifeq ($(PLATFORM_RISCV_XLEN), 32)
@@ -97,8 +93,7 @@ endif
 # FW_PAYLOAD_PATH="path to next boot stage binary image file"
 # FW_PAYLOAD_FDT_OFFSET=0x2200000
 #
-# You can use fixed address for payload firmware as an alternative option,
-# but this may fail when setting wrong FW_TEXT_START. Use with caution.
+# You can use fixed address for payload firmware as an alternative option.
 # SBI will prefer "FW_PAYLOAD_FDT_ADDR" if both "FW_PAYLOAD_FDT_OFFSET"
 # and "FW_PAYLOAD_FDT_ADDR" are defined.
 # FW_PAYLOAD_FDT_ADDR=0x82200000