diff options
Diffstat (limited to 'src/include/ipxe/efi/Uefi/UefiPxe.h')
| -rw-r--r-- | src/include/ipxe/efi/Uefi/UefiPxe.h | 620 |
1 files changed, 304 insertions, 316 deletions
diff --git a/src/include/ipxe/efi/Uefi/UefiPxe.h b/src/include/ipxe/efi/Uefi/UefiPxe.h index 6ed5c9a..b4366ed 100644 --- a/src/include/ipxe/efi/Uefi/UefiPxe.h +++ b/src/include/ipxe/efi/Uefi/UefiPxe.h @@ -3,14 +3,8 @@ structure prototypes, global variables and constants that are needed for porting PXE to EFI. -Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR> -This program and the accompanying materials are licensed and made available under -the terms and conditions of the BSD License that accompanies this distribution. -The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php. - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> +SPDX-License-Identifier: BSD-2-Clause-Patent @par Revision Reference: 32/64-bit PXE specification: @@ -21,7 +15,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #ifndef __EFI_PXE_H__ #define __EFI_PXE_H__ -FILE_LICENCE ( BSD3 ); +FILE_LICENCE ( BSD2_PATENT ); #pragma pack(1) @@ -34,15 +28,15 @@ FILE_LICENCE ( BSD3 ); /// /// UNDI ROM ID and devive ID signature. /// -#define PXE_BUSTYPE_PXE PXE_BUSTYPE ('!', 'P', 'X', 'E') +#define PXE_BUSTYPE_PXE PXE_BUSTYPE ('!', 'P', 'X', 'E') /// /// BUS ROM ID signatures. /// -#define PXE_BUSTYPE_PCI PXE_BUSTYPE ('P', 'C', 'I', 'R') -#define PXE_BUSTYPE_PC_CARD PXE_BUSTYPE ('P', 'C', 'C', 'R') -#define PXE_BUSTYPE_USB PXE_BUSTYPE ('U', 'S', 'B', 'R') -#define PXE_BUSTYPE_1394 PXE_BUSTYPE ('1', '3', '9', '4') +#define PXE_BUSTYPE_PCI PXE_BUSTYPE ('P', 'C', 'I', 'R') +#define PXE_BUSTYPE_PC_CARD PXE_BUSTYPE ('P', 'C', 'C', 'R') +#define PXE_BUSTYPE_USB PXE_BUSTYPE ('U', 'S', 'B', 'R') +#define PXE_BUSTYPE_1394 PXE_BUSTYPE ('1', '3', '9', '4') #define PXE_SWAP_UINT16(n) ((((PXE_UINT16) (n) & 0x00FF) << 8) | (((PXE_UINT16) (n) & 0xFF00) >> 8)) @@ -62,31 +56,30 @@ FILE_LICENCE ( BSD3 ); (((PXE_UINT64)(n) & 0x00FF000000000000ULL) >> 40) | \ (((PXE_UINT64)(n) & 0xFF00000000000000ULL) >> 56)) - #define PXE_CPBSIZE_NOT_USED 0 ///< zero #define PXE_DBSIZE_NOT_USED 0 ///< zero #define PXE_CPBADDR_NOT_USED (PXE_UINT64) 0 ///< zero #define PXE_DBADDR_NOT_USED (PXE_UINT64) 0 ///< zero #define PXE_CONST CONST -#define PXE_VOLATILE volatile +#define PXE_VOLATILE volatile -typedef VOID PXE_VOID; -typedef UINT8 PXE_UINT8; -typedef UINT16 PXE_UINT16; -typedef UINT32 PXE_UINT32; -typedef UINTN PXE_UINTN; +typedef VOID PXE_VOID; +typedef UINT8 PXE_UINT8; +typedef UINT16 PXE_UINT16; +typedef UINT32 PXE_UINT32; +typedef UINTN PXE_UINTN; /// /// Typedef unsigned long PXE_UINT64. /// -typedef UINT64 PXE_UINT64; +typedef UINT64 PXE_UINT64; typedef PXE_UINT8 PXE_BOOL; -#define PXE_FALSE 0 ///< zero -#define PXE_TRUE (!PXE_FALSE) +#define PXE_FALSE 0 ///< zero +#define PXE_TRUE (!PXE_FALSE) -typedef PXE_UINT16 PXE_OPCODE; +typedef PXE_UINT16 PXE_OPCODE; /// /// Return UNDI operational state. @@ -101,7 +94,7 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Change UNDI operational state from Started to Stopped. /// -#define PXE_OPCODE_STOP 0x0002 +#define PXE_OPCODE_STOP 0x0002 /// /// Get UNDI initialization information. @@ -116,7 +109,7 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Changed UNDI operational state from Started to Initialized. /// -#define PXE_OPCODE_INITIALIZE 0x0005 +#define PXE_OPCODE_INITIALIZE 0x0005 /// /// Re-initialize the NIC H/W. @@ -126,7 +119,7 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Change the UNDI operational state from Initialized to Started. /// -#define PXE_OPCODE_SHUTDOWN 0x0007 +#define PXE_OPCODE_SHUTDOWN 0x0007 /// /// Read & change state of external interrupt enables. @@ -146,7 +139,7 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Read traffic statistics. /// -#define PXE_OPCODE_STATISTICS 0x000B +#define PXE_OPCODE_STATISTICS 0x000B /// /// Convert multicast IP address to multicast MAC address. @@ -156,12 +149,12 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Read or change non-volatile storage on the NIC. /// -#define PXE_OPCODE_NVDATA 0x000D +#define PXE_OPCODE_NVDATA 0x000D /// /// Get & clear interrupt status. /// -#define PXE_OPCODE_GET_STATUS 0x000E +#define PXE_OPCODE_GET_STATUS 0x000E /// /// Fill media header in packet for transmit. @@ -171,7 +164,7 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Transmit packet(s). /// -#define PXE_OPCODE_TRANSMIT 0x0010 +#define PXE_OPCODE_TRANSMIT 0x0010 /// /// Receive packet. @@ -181,9 +174,9 @@ typedef PXE_UINT16 PXE_OPCODE; /// /// Last valid PXE UNDI OpCode number. /// -#define PXE_OPCODE_LAST_VALID 0x0011 +#define PXE_OPCODE_LAST_VALID 0x0011 -typedef PXE_UINT16 PXE_OPFLAGS; +typedef PXE_UINT16 PXE_OPFLAGS; #define PXE_OPFLAGS_NOT_USED 0x0000 @@ -239,16 +232,16 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// Select whether to enable or disable external interrupt signals. /// Setting both enable and disable will return PXE_STATCODE_INVALID_OPFLAGS. /// -#define PXE_OPFLAGS_INTERRUPT_OPMASK 0xC000 -#define PXE_OPFLAGS_INTERRUPT_ENABLE 0x8000 -#define PXE_OPFLAGS_INTERRUPT_DISABLE 0x4000 -#define PXE_OPFLAGS_INTERRUPT_READ 0x0000 +#define PXE_OPFLAGS_INTERRUPT_OPMASK 0xC000 +#define PXE_OPFLAGS_INTERRUPT_ENABLE 0x8000 +#define PXE_OPFLAGS_INTERRUPT_DISABLE 0x4000 +#define PXE_OPFLAGS_INTERRUPT_READ 0x0000 /// /// Enable receive interrupts. An external interrupt will be generated /// after a complete non-error packet has been received. /// -#define PXE_OPFLAGS_INTERRUPT_RECEIVE 0x0001 +#define PXE_OPFLAGS_INTERRUPT_RECEIVE 0x0001 /// /// Enable transmit interrupts. An external interrupt will be generated @@ -260,7 +253,7 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// Enable command interrupts. An external interrupt will be generated /// when command execution stops. /// -#define PXE_OPFLAGS_INTERRUPT_COMMAND 0x0004 +#define PXE_OPFLAGS_INTERRUPT_COMMAND 0x0004 /// /// Generate software interrupt. Setting this bit generates an external @@ -284,7 +277,7 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// To reset the contents of the multicast MAC address filter list, /// set this OpFlag: /// -#define PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST 0x2000 +#define PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST 0x2000 /// /// Enable unicast packet receiving. Packets sent to the current station @@ -303,7 +296,7 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// of the multicast MAC addresses in the multicast MAC address filter /// list will be received. If the filter list is empty, no multicast /// -#define PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004 +#define PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004 /// /// Enable promiscuous packet receiving. All packets will be received. @@ -345,9 +338,9 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// /// Select the type of non-volatile data operation. /// -#define PXE_OPFLAGS_NVDATA_OPMASK 0x0001 -#define PXE_OPFLAGS_NVDATA_READ 0x0000 -#define PXE_OPFLAGS_NVDATA_WRITE 0x0001 +#define PXE_OPFLAGS_NVDATA_OPMASK 0x0001 +#define PXE_OPFLAGS_NVDATA_READ 0x0000 +#define PXE_OPFLAGS_NVDATA_WRITE 0x0001 /// /// UNDI Get Status. @@ -368,12 +361,12 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// buffers. Do not plan on getting one buffer per interrupt. Some /// NICs and UNDIs may transmit multiple buffers per interrupt. /// -#define PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS 0x0002 +#define PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS 0x0002 /// /// Return current media status. /// -#define PXE_OPFLAGS_GET_MEDIA_STATUS 0x0004 +#define PXE_OPFLAGS_GET_MEDIA_STATUS 0x0004 /// /// UNDI Fill Header. @@ -394,9 +387,9 @@ typedef PXE_UINT16 PXE_OPFLAGS; #define PXE_OPFLAGS_TRANSMIT_BLOCK 0x0001 #define PXE_OPFLAGS_TRANSMIT_DONT_BLOCK 0x0000 -#define PXE_OPFLAGS_TRANSMIT_OPMASK 0x0002 -#define PXE_OPFLAGS_TRANSMIT_FRAGMENTED 0x0002 -#define PXE_OPFLAGS_TRANSMIT_WHOLE 0x0000 +#define PXE_OPFLAGS_TRANSMIT_OPMASK 0x0002 +#define PXE_OPFLAGS_TRANSMIT_FRAGMENTED 0x0002 +#define PXE_OPFLAGS_TRANSMIT_WHOLE 0x0000 /// /// UNDI Receive. @@ -407,7 +400,7 @@ typedef PXE_UINT16 PXE_OPFLAGS; /// /// PXE STATFLAGS. /// -typedef PXE_UINT16 PXE_STATFLAGS; +typedef PXE_UINT16 PXE_STATFLAGS; #define PXE_STATFLAGS_INITIALIZE 0x0000 @@ -427,10 +420,10 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// UNDI Get State. /// -#define PXE_STATFLAGS_GET_STATE_MASK 0x0003 -#define PXE_STATFLAGS_GET_STATE_INITIALIZED 0x0002 -#define PXE_STATFLAGS_GET_STATE_STARTED 0x0001 -#define PXE_STATFLAGS_GET_STATE_STOPPED 0x0000 +#define PXE_STATFLAGS_GET_STATE_MASK 0x0003 +#define PXE_STATFLAGS_GET_STATE_INITIALIZED 0x0002 +#define PXE_STATFLAGS_GET_STATE_STARTED 0x0001 +#define PXE_STATFLAGS_GET_STATE_STOPPED 0x0000 /// /// UNDI Start. @@ -470,7 +463,7 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// If set, receive interrupts are enabled. /// -#define PXE_STATFLAGS_INTERRUPT_RECEIVE 0x0001 +#define PXE_STATFLAGS_INTERRUPT_RECEIVE 0x0001 /// /// If set, transmit interrupts are enabled. @@ -480,7 +473,7 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// If set, command interrupts are enabled. /// -#define PXE_STATFLAGS_INTERRUPT_COMMAND 0x0004 +#define PXE_STATFLAGS_INTERRUPT_COMMAND 0x0004 /// /// UNDI Receive Filters. @@ -500,7 +493,7 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// If set, multicast packets that match up with the multicast address /// filter list will be received. /// -#define PXE_STATFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004 +#define PXE_STATFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004 /// /// If set, all packets will be received. @@ -542,8 +535,8 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// Use to determine if an interrupt has occurred. /// -#define PXE_STATFLAGS_GET_STATUS_INTERRUPT_MASK 0x000F -#define PXE_STATFLAGS_GET_STATUS_NO_INTERRUPTS 0x0000 +#define PXE_STATFLAGS_GET_STATUS_INTERRUPT_MASK 0x000F +#define PXE_STATFLAGS_GET_STATUS_NO_INTERRUPTS 0x0000 /// /// If set, at least one receive interrupt occurred. @@ -553,7 +546,7 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// If set, at least one transmit interrupt occurred. /// -#define PXE_STATFLAGS_GET_STATUS_TRANSMIT 0x0002 +#define PXE_STATFLAGS_GET_STATUS_TRANSMIT 0x0002 /// /// If set, at least one command interrupt occurred. @@ -563,7 +556,7 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// If set, at least one software interrupt occurred. /// -#define PXE_STATFLAGS_GET_STATUS_SOFTWARE 0x0008 +#define PXE_STATFLAGS_GET_STATUS_SOFTWARE 0x0008 /// /// This flag is set if the transmitted buffer queue is empty. This flag @@ -595,20 +588,20 @@ typedef PXE_UINT16 PXE_STATFLAGS; /// /// UNDI Receive -///. +/// . /// /// No additional StatFlags. /// -typedef PXE_UINT16 PXE_STATCODE; +typedef PXE_UINT16 PXE_STATCODE; -#define PXE_STATCODE_INITIALIZE 0x0000 +#define PXE_STATCODE_INITIALIZE 0x0000 /// /// Common StatCodes returned by all UNDI commands, UNDI protocol functions /// and BC protocol functions. /// -#define PXE_STATCODE_SUCCESS 0x0000 +#define PXE_STATCODE_SUCCESS 0x0000 #define PXE_STATCODE_INVALID_CDB 0x0001 #define PXE_STATCODE_INVALID_CPB 0x0002 @@ -630,20 +623,20 @@ typedef PXE_UINT16 PXE_STATCODE; #define PXE_STATCODE_NOT_ENOUGH_MEMORY 0x0012 #define PXE_STATCODE_NO_DATA 0x0013 -typedef PXE_UINT16 PXE_IFNUM; +typedef PXE_UINT16 PXE_IFNUM; /// /// This interface number must be passed to the S/W UNDI Start command. /// -#define PXE_IFNUM_START 0x0000 +#define PXE_IFNUM_START 0x0000 /// /// This interface number is returned by the S/W UNDI Get State and /// Start commands if information in the CDB, CPB or DB is invalid. /// -#define PXE_IFNUM_INVALID 0x0000 +#define PXE_IFNUM_INVALID 0x0000 -typedef PXE_UINT16 PXE_CONTROL; +typedef PXE_UINT16 PXE_CONTROL; /// /// Setting this flag directs the UNDI to queue this command for later @@ -652,7 +645,7 @@ typedef PXE_UINT16 PXE_CONTROL; /// is returned. If the queue is full, a PXE_STATCODE_CDB_QUEUE_FULL /// error is returned. /// -#define PXE_CONTROL_QUEUE_IF_BUSY 0x0002 +#define PXE_CONTROL_QUEUE_IF_BUSY 0x0002 /// /// These two bit values are used to determine if there are more UNDI @@ -664,26 +657,26 @@ typedef PXE_UINT16 PXE_CONTROL; #define PXE_CONTROL_LINK 0x0001 #define PXE_CONTROL_LAST_CDB_IN_LIST 0x0000 -typedef PXE_UINT8 PXE_FRAME_TYPE; +typedef PXE_UINT8 PXE_FRAME_TYPE; -#define PXE_FRAME_TYPE_NONE 0x00 -#define PXE_FRAME_TYPE_UNICAST 0x01 -#define PXE_FRAME_TYPE_BROADCAST 0x02 -#define PXE_FRAME_TYPE_FILTERED_MULTICAST 0x03 -#define PXE_FRAME_TYPE_PROMISCUOUS 0x04 -#define PXE_FRAME_TYPE_PROMISCUOUS_MULTICAST 0x05 +#define PXE_FRAME_TYPE_NONE 0x00 +#define PXE_FRAME_TYPE_UNICAST 0x01 +#define PXE_FRAME_TYPE_BROADCAST 0x02 +#define PXE_FRAME_TYPE_FILTERED_MULTICAST 0x03 +#define PXE_FRAME_TYPE_PROMISCUOUS 0x04 +#define PXE_FRAME_TYPE_PROMISCUOUS_MULTICAST 0x05 -#define PXE_FRAME_TYPE_MULTICAST PXE_FRAME_TYPE_FILTERED_MULTICAST +#define PXE_FRAME_TYPE_MULTICAST PXE_FRAME_TYPE_FILTERED_MULTICAST -typedef PXE_UINT32 PXE_IPV4; +typedef PXE_UINT32 PXE_IPV4; -typedef PXE_UINT32 PXE_IPV6[4]; +typedef PXE_UINT32 PXE_IPV6[4]; #define PXE_MAC_LENGTH 32 -typedef PXE_UINT8 PXE_MAC_ADDR[PXE_MAC_LENGTH]; +typedef PXE_UINT8 PXE_MAC_ADDR[PXE_MAC_LENGTH]; -typedef PXE_UINT8 PXE_IFTYPE; -typedef UINT16 PXE_MEDIA_PROTOCOL; +typedef PXE_UINT8 PXE_IFTYPE; +typedef UINT16 PXE_MEDIA_PROTOCOL; /// /// This information is from the ARP section of RFC 1700. @@ -717,16 +710,16 @@ typedef UINT16 PXE_MEDIA_PROTOCOL; #define PXE_IFTYPE_FIBRE_CHANNEL 0x12 typedef struct s_pxe_hw_undi { - PXE_UINT32 Signature; ///< PXE_ROMID_SIGNATURE. - PXE_UINT8 Len; ///< sizeof(PXE_HW_UNDI). - PXE_UINT8 Fudge; ///< makes 8-bit cksum equal zero. - PXE_UINT8 Rev; ///< PXE_ROMID_REV. - PXE_UINT8 IFcnt; ///< physical connector count lower byte. - PXE_UINT8 MajorVer; ///< PXE_ROMID_MAJORVER. - PXE_UINT8 MinorVer; ///< PXE_ROMID_MINORVER. - PXE_UINT8 IFcntExt; ///< physical connector count upper byte. - PXE_UINT8 reserved; ///< zero, not used. - PXE_UINT32 Implementation; ///< implementation flags. + PXE_UINT32 Signature; ///< PXE_ROMID_SIGNATURE. + PXE_UINT8 Len; ///< sizeof(PXE_HW_UNDI). + PXE_UINT8 Fudge; ///< makes 8-bit cksum equal zero. + PXE_UINT8 Rev; ///< PXE_ROMID_REV. + PXE_UINT8 IFcnt; ///< physical connector count lower byte. + PXE_UINT8 MajorVer; ///< PXE_ROMID_MAJORVER. + PXE_UINT8 MinorVer; ///< PXE_ROMID_MINORVER. + PXE_UINT8 IFcntExt; ///< physical connector count upper byte. + PXE_UINT8 reserved; ///< zero, not used. + PXE_UINT32 Implementation; ///< implementation flags. ///< reserved ///< vendor use. ///< UINT32 Status; ///< status port. ///< UINT32 Command; ///< command port. @@ -750,32 +743,32 @@ typedef struct s_pxe_hw_undi { /// /// If set, last command failed. /// -#define PXE_HWSTAT_COMMAND_FAILED 0x20000000 +#define PXE_HWSTAT_COMMAND_FAILED 0x20000000 /// /// If set, identifies enabled receive filters. /// -#define PXE_HWSTAT_PROMISCUOUS_MULTICAST_RX_ENABLED 0x00001000 -#define PXE_HWSTAT_PROMISCUOUS_RX_ENABLED 0x00000800 -#define PXE_HWSTAT_BROADCAST_RX_ENABLED 0x00000400 -#define PXE_HWSTAT_MULTICAST_RX_ENABLED 0x00000200 -#define PXE_HWSTAT_UNICAST_RX_ENABLED 0x00000100 +#define PXE_HWSTAT_PROMISCUOUS_MULTICAST_RX_ENABLED 0x00001000 +#define PXE_HWSTAT_PROMISCUOUS_RX_ENABLED 0x00000800 +#define PXE_HWSTAT_BROADCAST_RX_ENABLED 0x00000400 +#define PXE_HWSTAT_MULTICAST_RX_ENABLED 0x00000200 +#define PXE_HWSTAT_UNICAST_RX_ENABLED 0x00000100 /// /// If set, identifies enabled external interrupts. /// -#define PXE_HWSTAT_SOFTWARE_INT_ENABLED 0x00000080 -#define PXE_HWSTAT_TX_COMPLETE_INT_ENABLED 0x00000040 -#define PXE_HWSTAT_PACKET_RX_INT_ENABLED 0x00000020 -#define PXE_HWSTAT_CMD_COMPLETE_INT_ENABLED 0x00000010 +#define PXE_HWSTAT_SOFTWARE_INT_ENABLED 0x00000080 +#define PXE_HWSTAT_TX_COMPLETE_INT_ENABLED 0x00000040 +#define PXE_HWSTAT_PACKET_RX_INT_ENABLED 0x00000020 +#define PXE_HWSTAT_CMD_COMPLETE_INT_ENABLED 0x00000010 /// /// If set, identifies pending interrupts. /// -#define PXE_HWSTAT_SOFTWARE_INT_PENDING 0x00000008 -#define PXE_HWSTAT_TX_COMPLETE_INT_PENDING 0x00000004 -#define PXE_HWSTAT_PACKET_RX_INT_PENDING 0x00000002 -#define PXE_HWSTAT_CMD_COMPLETE_INT_PENDING 0x00000001 +#define PXE_HWSTAT_SOFTWARE_INT_PENDING 0x00000008 +#define PXE_HWSTAT_TX_COMPLETE_INT_PENDING 0x00000004 +#define PXE_HWSTAT_PACKET_RX_INT_PENDING 0x00000002 +#define PXE_HWSTAT_CMD_COMPLETE_INT_PENDING 0x00000001 /// /// Command port definitions. @@ -791,19 +784,19 @@ typedef struct s_pxe_hw_undi { /// /// Use these to enable/disable receive filters. /// -#define PXE_HWCMD_PROMISCUOUS_MULTICAST_RX_ENABLE 0x00001000 -#define PXE_HWCMD_PROMISCUOUS_RX_ENABLE 0x00000800 -#define PXE_HWCMD_BROADCAST_RX_ENABLE 0x00000400 -#define PXE_HWCMD_MULTICAST_RX_ENABLE 0x00000200 -#define PXE_HWCMD_UNICAST_RX_ENABLE 0x00000100 +#define PXE_HWCMD_PROMISCUOUS_MULTICAST_RX_ENABLE 0x00001000 +#define PXE_HWCMD_PROMISCUOUS_RX_ENABLE 0x00000800 +#define PXE_HWCMD_BROADCAST_RX_ENABLE 0x00000400 +#define PXE_HWCMD_MULTICAST_RX_ENABLE 0x00000200 +#define PXE_HWCMD_UNICAST_RX_ENABLE 0x00000100 /// /// Use these to enable/disable external interrupts. /// -#define PXE_HWCMD_SOFTWARE_INT_ENABLE 0x00000080 -#define PXE_HWCMD_TX_COMPLETE_INT_ENABLE 0x00000040 -#define PXE_HWCMD_PACKET_RX_INT_ENABLE 0x00000020 -#define PXE_HWCMD_CMD_COMPLETE_INT_ENABLE 0x00000010 +#define PXE_HWCMD_SOFTWARE_INT_ENABLE 0x00000080 +#define PXE_HWCMD_TX_COMPLETE_INT_ENABLE 0x00000040 +#define PXE_HWCMD_PACKET_RX_INT_ENABLE 0x00000020 +#define PXE_HWCMD_CMD_COMPLETE_INT_ENABLE 0x00000010 /// /// Use these to clear pending external interrupts. @@ -814,44 +807,44 @@ typedef struct s_pxe_hw_undi { #define PXE_HWCMD_CLEAR_CMD_COMPLETE_INT 0x00000001 typedef struct s_pxe_sw_undi { - PXE_UINT32 Signature; ///< PXE_ROMID_SIGNATURE. - PXE_UINT8 Len; ///< sizeof(PXE_SW_UNDI). - PXE_UINT8 Fudge; ///< makes 8-bit cksum zero. - PXE_UINT8 Rev; ///< PXE_ROMID_REV. - PXE_UINT8 IFcnt; ///< physical connector count lower byte. - PXE_UINT8 MajorVer; ///< PXE_ROMID_MAJORVER. - PXE_UINT8 MinorVer; ///< PXE_ROMID_MINORVER. - PXE_UINT8 IFcntExt; ///< physical connector count upper byte. - PXE_UINT8 reserved1; ///< zero, not used. - PXE_UINT32 Implementation; ///< Implementation flags. - PXE_UINT64 EntryPoint; ///< API entry point. - PXE_UINT8 reserved2[3]; ///< zero, not used. - PXE_UINT8 BusCnt; ///< number of bustypes supported. - PXE_UINT32 BusType[1]; ///< list of supported bustypes. + PXE_UINT32 Signature; ///< PXE_ROMID_SIGNATURE. + PXE_UINT8 Len; ///< sizeof(PXE_SW_UNDI). + PXE_UINT8 Fudge; ///< makes 8-bit cksum zero. + PXE_UINT8 Rev; ///< PXE_ROMID_REV. + PXE_UINT8 IFcnt; ///< physical connector count lower byte. + PXE_UINT8 MajorVer; ///< PXE_ROMID_MAJORVER. + PXE_UINT8 MinorVer; ///< PXE_ROMID_MINORVER. + PXE_UINT8 IFcntExt; ///< physical connector count upper byte. + PXE_UINT8 reserved1; ///< zero, not used. + PXE_UINT32 Implementation; ///< Implementation flags. + PXE_UINT64 EntryPoint; ///< API entry point. + PXE_UINT8 reserved2[3]; ///< zero, not used. + PXE_UINT8 BusCnt; ///< number of bustypes supported. + PXE_UINT32 BusType[1]; ///< list of supported bustypes. } PXE_SW_UNDI; typedef union u_pxe_undi { - PXE_HW_UNDI hw; - PXE_SW_UNDI sw; + PXE_HW_UNDI hw; + PXE_SW_UNDI sw; } PXE_UNDI; /// /// Signature of !PXE structure. /// -#define PXE_ROMID_SIGNATURE PXE_BUSTYPE ('!', 'P', 'X', 'E') +#define PXE_ROMID_SIGNATURE PXE_BUSTYPE ('!', 'P', 'X', 'E') /// /// !PXE structure format revision -///. -#define PXE_ROMID_REV 0x02 +/// . +#define PXE_ROMID_REV 0x02 /// /// UNDI command interface revision. These are the values that get sent /// in option 94 (Client Network Interface Identifier) in the DHCP Discover /// and PXE Boot Server Request packets. /// -#define PXE_ROMID_MAJORVER 0x03 -#define PXE_ROMID_MINORVER 0x01 +#define PXE_ROMID_MAJORVER 0x03 +#define PXE_ROMID_MINORVER 0x01 /// /// Implementation flags. @@ -880,21 +873,21 @@ typedef union u_pxe_undi { #define PXE_ROMID_IMP_CMD_COMPLETE_INT_SUPPORTED 0x00000001 typedef struct s_pxe_cdb { - PXE_OPCODE OpCode; - PXE_OPFLAGS OpFlags; - PXE_UINT16 CPBsize; - PXE_UINT16 DBsize; - PXE_UINT64 CPBaddr; - PXE_UINT64 DBaddr; - PXE_STATCODE StatCode; - PXE_STATFLAGS StatFlags; - PXE_UINT16 IFnum; - PXE_CONTROL Control; + PXE_OPCODE OpCode; + PXE_OPFLAGS OpFlags; + PXE_UINT16 CPBsize; + PXE_UINT16 DBsize; + PXE_UINT64 CPBaddr; + PXE_UINT64 DBaddr; + PXE_STATCODE StatCode; + PXE_STATFLAGS StatFlags; + PXE_UINT16 IFnum; + PXE_CONTROL Control; } PXE_CDB; typedef union u_pxe_ip_addr { - PXE_IPV6 IPv6; - PXE_IPV4 IPv4; + PXE_IPV6 IPv6; + PXE_IPV4 IPv4; } PXE_IP_ADDR; typedef union pxe_device { @@ -909,26 +902,24 @@ typedef union pxe_device { /// See S/W UNDI ROMID structure definition for PCI and /// PCC BusType definitions. /// - PXE_UINT32 BusType; + PXE_UINT32 BusType; /// /// Bus, device & function numbers that locate this device. /// - PXE_UINT16 Bus; - PXE_UINT8 Device; - PXE_UINT8 Function; - } - PCI, PCC; - + PXE_UINT16 Bus; + PXE_UINT8 Device; + PXE_UINT8 Function; + } PCI, PCC; } PXE_DEVICE; /// /// cpb and db definitions /// -#define MAX_PCI_CONFIG_LEN 64 ///< # of dwords. -#define MAX_EEPROM_LEN 128 ///< # of dwords. -#define MAX_XMIT_BUFFERS 32 ///< recycling Q length for xmit_done. -#define MAX_MCAST_ADDRESS_CNT 8 +#define MAX_PCI_CONFIG_LEN 64 ///< # of dwords. +#define MAX_EEPROM_LEN 128 ///< # of dwords. +#define MAX_XMIT_BUFFERS 32 ///< recycling Q length for xmit_done. +#define MAX_MCAST_ADDRESS_CNT 8 typedef struct s_pxe_cpb_start_30 { /// @@ -941,7 +932,7 @@ typedef struct s_pxe_cpb_start_30 { /// /// This field cannot be set to zero. /// - UINT64 Delay; + UINT64 Delay; /// /// PXE_VOID Block(UINT32 enable); @@ -957,7 +948,7 @@ typedef struct s_pxe_cpb_start_30 { /// /// This field cannot be set to zero. /// - UINT64 Block; + UINT64 Block; /// /// PXE_VOID Virt2Phys(UINT64 virtual, UINT64 physical_ptr); @@ -971,7 +962,7 @@ typedef struct s_pxe_cpb_start_30 { /// This field can be set to zero if virtual and physical addresses /// are equal. /// - UINT64 Virt2Phys; + UINT64 Virt2Phys; /// /// PXE_VOID Mem_IO(UINT8 read_write, UINT8 len, UINT64 port, /// UINT64 buf_addr); @@ -982,7 +973,7 @@ typedef struct s_pxe_cpb_start_30 { /// /// This field can not be set to zero. /// - UINT64 Mem_IO; + UINT64 Mem_IO; } PXE_CPB_START_30; typedef struct s_pxe_cpb_start_31 { @@ -996,7 +987,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field cannot be set to zero. /// - UINT64 Delay; + UINT64 Delay; /// /// PXE_VOID Block(UINT64 unq_id, UINT32 enable); @@ -1012,7 +1003,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field cannot be set to zero. /// - UINT64 Block; + UINT64 Block; /// /// PXE_VOID Virt2Phys(UINT64 UnqId, UINT64 virtual, UINT64 physical_ptr); @@ -1026,7 +1017,7 @@ typedef struct s_pxe_cpb_start_31 { /// This field can be set to zero if virtual and physical addresses /// are equal. /// - UINT64 Virt2Phys; + UINT64 Virt2Phys; /// /// PXE_VOID Mem_IO(UINT64 UnqId, UINT8 read_write, UINT8 len, UINT64 port, /// UINT64 buf_addr); @@ -1037,7 +1028,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field can not be set to zero. /// - UINT64 Mem_IO; + UINT64 Mem_IO; /// /// PXE_VOID Map_Mem(UINT64 unq_id, UINT64 virtual_addr, UINT32 size, /// UINT32 Direction, UINT64 mapped_addr); @@ -1054,7 +1045,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field can be set to zero if there is no mapping service available. /// - UINT64 Map_Mem; + UINT64 Map_Mem; /// /// PXE_VOID UnMap_Mem(UINT64 unq_id, UINT64 virtual_addr, UINT32 size, @@ -1065,7 +1056,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field can be set to zero if there is no unmapping service available. /// - UINT64 UnMap_Mem; + UINT64 UnMap_Mem; /// /// PXE_VOID Sync_Mem(UINT64 unq_id, UINT64 virtual, @@ -1077,7 +1068,7 @@ typedef struct s_pxe_cpb_start_31 { /// /// This field can be set to zero if there is no service available. /// - UINT64 Sync_Mem; + UINT64 Sync_Mem; /// /// protocol driver can provide anything for this Unique_ID, UNDI remembers @@ -1085,19 +1076,19 @@ typedef struct s_pxe_cpb_start_31 { /// the ifnum and gives it back as a parameter to all the call-back routines /// when calling for that interface! /// - UINT64 Unique_ID; + UINT64 Unique_ID; } PXE_CPB_START_31; -#define TO_AND_FROM_DEVICE 0 -#define FROM_DEVICE 1 -#define TO_DEVICE 2 +#define TO_AND_FROM_DEVICE 0 +#define FROM_DEVICE 1 +#define TO_DEVICE 2 -#define PXE_DELAY_MILLISECOND 1000 -#define PXE_DELAY_SECOND 1000000 -#define PXE_IO_READ 0 -#define PXE_IO_WRITE 1 -#define PXE_MEM_READ 2 -#define PXE_MEM_WRITE 4 +#define PXE_DELAY_MILLISECOND 1000 +#define PXE_DELAY_SECOND 1000000 +#define PXE_IO_READ 0 +#define PXE_IO_WRITE 1 +#define PXE_MEM_READ 2 +#define PXE_MEM_WRITE 4 typedef struct s_pxe_db_get_init_info { /// @@ -1108,47 +1099,47 @@ typedef struct s_pxe_db_get_init_info { /// If MemoryRequired is zero, the UNDI does not need and will not /// use system memory to receive and transmit packets. /// - PXE_UINT32 MemoryRequired; + PXE_UINT32 MemoryRequired; /// /// Maximum frame data length for Tx/Rx excluding the media header. /// - PXE_UINT32 FrameDataLen; + PXE_UINT32 FrameDataLen; /// /// Supported link speeds are in units of mega bits. Common ethernet /// values are 10, 100 and 1000. Unused LinkSpeeds[] entries are zero /// filled. /// - PXE_UINT32 LinkSpeeds[4]; + PXE_UINT32 LinkSpeeds[4]; /// /// Number of non-volatile storage items. /// - PXE_UINT32 NvCount; + PXE_UINT32 NvCount; /// /// Width of non-volatile storage item in bytes. 0, 1, 2 or 4 /// - PXE_UINT16 NvWidth; + PXE_UINT16 NvWidth; /// /// Media header length. This is the typical media header length for /// this UNDI. This information is needed when allocating receive /// and transmit buffers. /// - PXE_UINT16 MediaHeaderLen; + PXE_UINT16 MediaHeaderLen; /// /// Number of bytes in the NIC hardware (MAC) address. /// - PXE_UINT16 HWaddrLen; + PXE_UINT16 HWaddrLen; /// /// Maximum number of multicast MAC addresses in the multicast /// MAC address filter list. /// - PXE_UINT16 MCastFilterCnt; + PXE_UINT16 MCastFilterCnt; /// /// Default number and size of transmit and receive buffers that will @@ -1157,63 +1148,63 @@ typedef struct s_pxe_db_get_init_info { /// command. If MemoryRequired is zero, this allocation will come out of /// memory on the NIC. /// - PXE_UINT16 TxBufCnt; - PXE_UINT16 TxBufSize; - PXE_UINT16 RxBufCnt; - PXE_UINT16 RxBufSize; + PXE_UINT16 TxBufCnt; + PXE_UINT16 TxBufSize; + PXE_UINT16 RxBufCnt; + PXE_UINT16 RxBufSize; /// /// Hardware interface types defined in the Assigned Numbers RFC /// and used in DHCP and ARP packets. /// See the PXE_IFTYPE typedef and PXE_IFTYPE_xxx macros. /// - PXE_UINT8 IFtype; + PXE_UINT8 IFtype; /// /// Supported duplex. See PXE_DUPLEX_xxxxx #defines below. /// - PXE_UINT8 SupportedDuplexModes; + PXE_UINT8 SupportedDuplexModes; /// /// Supported loopback options. See PXE_LOOPBACK_xxxxx #defines below. /// - PXE_UINT8 SupportedLoopBackModes; + PXE_UINT8 SupportedLoopBackModes; } PXE_DB_GET_INIT_INFO; -#define PXE_MAX_TXRX_UNIT_ETHER 1500 +#define PXE_MAX_TXRX_UNIT_ETHER 1500 -#define PXE_HWADDR_LEN_ETHER 0x0006 -#define PXE_MAC_HEADER_LEN_ETHER 0x000E +#define PXE_HWADDR_LEN_ETHER 0x0006 +#define PXE_MAC_HEADER_LEN_ETHER 0x000E #define PXE_DUPLEX_ENABLE_FULL_SUPPORTED 1 #define PXE_DUPLEX_FORCE_FULL_SUPPORTED 2 -#define PXE_LOOPBACK_INTERNAL_SUPPORTED 1 -#define PXE_LOOPBACK_EXTERNAL_SUPPORTED 2 +#define PXE_LOOPBACK_INTERNAL_SUPPORTED 1 +#define PXE_LOOPBACK_EXTERNAL_SUPPORTED 2 typedef struct s_pxe_pci_config_info { /// /// This is the flag field for the PXE_DB_GET_CONFIG_INFO union. /// For PCI bus devices, this field is set to PXE_BUSTYPE_PCI. /// - UINT32 BusType; + UINT32 BusType; /// /// This identifies the PCI network device that this UNDI interface. /// is bound to. /// - UINT16 Bus; - UINT8 Device; - UINT8 Function; + UINT16 Bus; + UINT8 Device; + UINT8 Function; /// /// This is a copy of the PCI configuration space for this /// network device. /// union { - UINT8 Byte[256]; - UINT16 Word[128]; - UINT32 Dword[64]; + UINT8 Byte[256]; + UINT16 Word[128]; + UINT32 Dword[64]; } Config; } PXE_PCI_CONFIG_INFO; @@ -1222,30 +1213,30 @@ typedef struct s_pxe_pcc_config_info { /// This is the flag field for the PXE_DB_GET_CONFIG_INFO union. /// For PCC bus devices, this field is set to PXE_BUSTYPE_PCC. /// - PXE_UINT32 BusType; + PXE_UINT32 BusType; /// /// This identifies the PCC network device that this UNDI interface /// is bound to. /// - PXE_UINT16 Bus; - PXE_UINT8 Device; - PXE_UINT8 Function; + PXE_UINT16 Bus; + PXE_UINT8 Device; + PXE_UINT8 Function; /// /// This is a copy of the PCC configuration space for this /// network device. /// union { - PXE_UINT8 Byte[256]; - PXE_UINT16 Word[128]; - PXE_UINT32 Dword[64]; + PXE_UINT8 Byte[256]; + PXE_UINT16 Word[128]; + PXE_UINT32 Dword[64]; } Config; } PXE_PCC_CONFIG_INFO; typedef union u_pxe_db_get_config_info { - PXE_PCI_CONFIG_INFO pci; - PXE_PCC_CONFIG_INFO pcc; + PXE_PCI_CONFIG_INFO pci; + PXE_PCC_CONFIG_INFO pcc; } PXE_DB_GET_CONFIG_INFO; typedef struct s_pxe_cpb_initialize { @@ -1254,20 +1245,20 @@ typedef struct s_pxe_cpb_initialize { /// be in contiguous physical memory and cannot be swapped out. The UNDI /// will be using this for transmit and receive buffering. /// - PXE_UINT64 MemoryAddr; + PXE_UINT64 MemoryAddr; /// /// MemoryLength must be greater than or equal to MemoryRequired /// returned by the Get Init Info command. /// - PXE_UINT32 MemoryLength; + PXE_UINT32 MemoryLength; /// /// Desired link speed in Mbit/sec. Common ethernet values are 10, 100 /// and 1000. Setting a value of zero will auto-detect and/or use the /// default link speed (operation depends on UNDI/NIC functionality). /// - PXE_UINT32 LinkSpeed; + PXE_UINT32 LinkSpeed; /// /// Suggested number and size of receive and transmit buffers to @@ -1279,29 +1270,29 @@ typedef struct s_pxe_cpb_initialize { /// If these fields are set to zero, the UNDI will allocate buffer /// counts and sizes as it sees fit. /// - PXE_UINT16 TxBufCnt; - PXE_UINT16 TxBufSize; - PXE_UINT16 RxBufCnt; - PXE_UINT16 RxBufSize; + PXE_UINT16 TxBufCnt; + PXE_UINT16 TxBufSize; + PXE_UINT16 RxBufCnt; + PXE_UINT16 RxBufSize; /// /// The following configuration parameters are optional and must be zero /// to use the default values. /// - PXE_UINT8 DuplexMode; + PXE_UINT8 DuplexMode; - PXE_UINT8 LoopBackMode; + PXE_UINT8 LoopBackMode; } PXE_CPB_INITIALIZE; -#define PXE_DUPLEX_DEFAULT 0x00 -#define PXE_FORCE_FULL_DUPLEX 0x01 -#define PXE_ENABLE_FULL_DUPLEX 0x02 -#define PXE_FORCE_HALF_DUPLEX 0x04 -#define PXE_DISABLE_FULL_DUPLEX 0x08 +#define PXE_DUPLEX_DEFAULT 0x00 +#define PXE_FORCE_FULL_DUPLEX 0x01 +#define PXE_ENABLE_FULL_DUPLEX 0x02 +#define PXE_FORCE_HALF_DUPLEX 0x04 +#define PXE_DISABLE_FULL_DUPLEX 0x08 -#define LOOPBACK_NORMAL 0 -#define LOOPBACK_INTERNAL 1 -#define LOOPBACK_EXTERNAL 2 +#define LOOPBACK_NORMAL 0 +#define LOOPBACK_INTERNAL 1 +#define LOOPBACK_EXTERNAL 2 typedef struct s_pxe_db_initialize { /// @@ -1312,16 +1303,16 @@ typedef struct s_pxe_db_initialize { /// Memory used by the UNDI and network device is allocated from the /// lowest memory buffer address. /// - PXE_UINT32 MemoryUsed; + PXE_UINT32 MemoryUsed; /// /// Actual number and size of receive and transmit buffers that were /// allocated. /// - PXE_UINT16 TxBufCnt; - PXE_UINT16 TxBufSize; - PXE_UINT16 RxBufCnt; - PXE_UINT16 RxBufSize; + PXE_UINT16 TxBufCnt; + PXE_UINT16 TxBufSize; + PXE_UINT16 RxBufCnt; + PXE_UINT16 RxBufSize; } PXE_DB_INITIALIZE; typedef struct s_pxe_cpb_receive_filters { @@ -1329,14 +1320,14 @@ typedef struct s_pxe_cpb_receive_filters { /// List of multicast MAC addresses. This list, if present, will /// replace the existing multicast MAC address filter list. /// - PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT]; + PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT]; } PXE_CPB_RECEIVE_FILTERS; typedef struct s_pxe_db_receive_filters { /// /// Filtered multicast MAC address list. /// - PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT]; + PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT]; } PXE_DB_RECEIVE_FILTERS; typedef struct s_pxe_cpb_station_address { @@ -1344,24 +1335,24 @@ typedef struct s_pxe_cpb_station_address { /// If supplied and supported, the current station MAC address /// will be changed. /// - PXE_MAC_ADDR StationAddr; + PXE_MAC_ADDR StationAddr; } PXE_CPB_STATION_ADDRESS; typedef struct s_pxe_dpb_station_address { /// /// Current station MAC address. /// - PXE_MAC_ADDR StationAddr; + PXE_MAC_ADDR StationAddr; /// /// Station broadcast MAC address. /// - PXE_MAC_ADDR BroadcastAddr; + PXE_MAC_ADDR BroadcastAddr; /// /// Permanent station MAC address. /// - PXE_MAC_ADDR PermanentAddr; + PXE_MAC_ADDR PermanentAddr; } PXE_DB_STATION_ADDRESS; typedef struct s_pxe_db_statistics { @@ -1374,12 +1365,12 @@ typedef struct s_pxe_db_statistics { /// If bit 0x21 is set, Data[0x21] is collected. /// Etc. /// - PXE_UINT64 Supported; + PXE_UINT64 Supported; /// /// Statistic data. /// - PXE_UINT64 Data[64]; + PXE_UINT64 Data[64]; } PXE_DB_STATISTICS; /// @@ -1391,7 +1382,7 @@ typedef struct s_pxe_db_statistics { /// /// Number of valid frames received and copied into receive buffers. /// -#define PXE_STATISTICS_RX_GOOD_FRAMES 0x01 +#define PXE_STATISTICS_RX_GOOD_FRAMES 0x01 /// /// Number of frames below the minimum length for the media. @@ -1403,7 +1394,7 @@ typedef struct s_pxe_db_statistics { /// Number of frames longer than the maxminum length for the /// media. This would be >1500 for ethernet. /// -#define PXE_STATISTICS_RX_OVERSIZE_FRAMES 0x03 +#define PXE_STATISTICS_RX_OVERSIZE_FRAMES 0x03 /// /// Valid frames that were dropped because receive buffers were full. @@ -1434,7 +1425,7 @@ typedef struct s_pxe_db_statistics { /// Total number of bytes received. Includes frames with errors /// and dropped frames. /// -#define PXE_STATISTICS_RX_TOTAL_BYTES 0x09 +#define PXE_STATISTICS_RX_TOTAL_BYTES 0x09 /// /// Transmit statistics. @@ -1453,45 +1444,45 @@ typedef struct s_pxe_db_statistics { /// /// Number of collisions detection on this subnet. /// -#define PXE_STATISTICS_COLLISIONS 0x14 +#define PXE_STATISTICS_COLLISIONS 0x14 /// /// Number of frames destined for unsupported protocol. /// -#define PXE_STATISTICS_UNSUPPORTED_PROTOCOL 0x15 +#define PXE_STATISTICS_UNSUPPORTED_PROTOCOL 0x15 /// /// Number of valid frames received that were duplicated. /// -#define PXE_STATISTICS_RX_DUPLICATED_FRAMES 0x16 +#define PXE_STATISTICS_RX_DUPLICATED_FRAMES 0x16 /// /// Number of encrypted frames received that failed to decrypt. /// -#define PXE_STATISTICS_RX_DECRYPT_ERROR_FRAMES 0x17 +#define PXE_STATISTICS_RX_DECRYPT_ERROR_FRAMES 0x17 /// /// Number of frames that failed to transmit after exceeding the retry limit. /// -#define PXE_STATISTICS_TX_ERROR_FRAMES 0x18 +#define PXE_STATISTICS_TX_ERROR_FRAMES 0x18 /// /// Number of frames transmitted successfully after more than one attempt. /// -#define PXE_STATISTICS_TX_RETRY_FRAMES 0x19 +#define PXE_STATISTICS_TX_RETRY_FRAMES 0x19 typedef struct s_pxe_cpb_mcast_ip_to_mac { /// /// Multicast IP address to be converted to multicast MAC address. /// - PXE_IP_ADDR IP; + PXE_IP_ADDR IP; } PXE_CPB_MCAST_IP_TO_MAC; typedef struct s_pxe_db_mcast_ip_to_mac { /// /// Multicast MAC address. /// - PXE_MAC_ADDR MAC; + PXE_MAC_ADDR MAC; } PXE_DB_MCAST_IP_TO_MAC; typedef struct s_pxe_cpb_nvdata_sparse { @@ -1502,15 +1493,15 @@ typedef struct s_pxe_cpb_nvdata_sparse { /// /// Non-volatile storage address to be changed. /// - PXE_UINT32 Addr; + PXE_UINT32 Addr; /// /// Data item to write into above storage address. /// union { - PXE_UINT8 Byte; - PXE_UINT16 Word; - PXE_UINT32 Dword; + PXE_UINT8 Byte; + PXE_UINT16 Word; + PXE_UINT32 Dword; } Data; } Item[MAX_EEPROM_LEN]; } PXE_CPB_NVDATA_SPARSE; @@ -1523,17 +1514,17 @@ typedef union u_pxe_cpb_nvdata_bulk { /// /// Array of byte-wide data items. /// - PXE_UINT8 Byte[MAX_EEPROM_LEN << 2]; + PXE_UINT8 Byte[MAX_EEPROM_LEN << 2]; /// /// Array of word-wide data items. /// - PXE_UINT16 Word[MAX_EEPROM_LEN << 1]; + PXE_UINT16 Word[MAX_EEPROM_LEN << 1]; /// /// Array of dword-wide data items. /// - PXE_UINT32 Dword[MAX_EEPROM_LEN]; + PXE_UINT32 Dword[MAX_EEPROM_LEN]; } PXE_CPB_NVDATA_BULK; typedef struct s_pxe_db_nvdata { @@ -1544,17 +1535,17 @@ typedef struct s_pxe_db_nvdata { /// /// Array of byte-wide data items. /// - PXE_UINT8 Byte[MAX_EEPROM_LEN << 2]; + PXE_UINT8 Byte[MAX_EEPROM_LEN << 2]; /// /// Array of word-wide data items. /// - PXE_UINT16 Word[MAX_EEPROM_LEN << 1]; + PXE_UINT16 Word[MAX_EEPROM_LEN << 1]; /// /// Array of dword-wide data items. /// - PXE_UINT32 Dword[MAX_EEPROM_LEN]; + PXE_UINT32 Dword[MAX_EEPROM_LEN]; } Data; } PXE_DB_NVDATA; @@ -1563,17 +1554,17 @@ typedef struct s_pxe_db_get_status { /// Length of next receive frame (header + data). If this is zero, /// there is no next receive frame available. /// - PXE_UINT32 RxFrameLen; + PXE_UINT32 RxFrameLen; /// /// Reserved, set to zero. /// - PXE_UINT32 reserved; + PXE_UINT32 reserved; /// /// Addresses of transmitted buffers that need to be recycled. /// - PXE_UINT64 TxBuffer[MAX_XMIT_BUFFERS]; + PXE_UINT64 TxBuffer[MAX_XMIT_BUFFERS]; } PXE_DB_GET_STATUS; typedef struct s_pxe_cpb_fill_header { @@ -1581,71 +1572,71 @@ typedef struct s_pxe_cpb_fill_header { /// Source and destination MAC addresses. These will be copied into /// the media header without doing byte swapping. /// - PXE_MAC_ADDR SrcAddr; - PXE_MAC_ADDR DestAddr; + PXE_MAC_ADDR SrcAddr; + PXE_MAC_ADDR DestAddr; /// /// Address of first byte of media header. The first byte of packet data /// follows the last byte of the media header. /// - PXE_UINT64 MediaHeader; + PXE_UINT64 MediaHeader; /// /// Length of packet data in bytes (not including the media header). /// - PXE_UINT32 PacketLen; + PXE_UINT32 PacketLen; /// /// Protocol type. This will be copied into the media header without /// doing byte swapping. Protocol type numbers can be obtained from /// the Assigned Numbers RFC 1700. /// - PXE_UINT16 Protocol; + PXE_UINT16 Protocol; /// /// Length of the media header in bytes. /// - PXE_UINT16 MediaHeaderLen; + PXE_UINT16 MediaHeaderLen; } PXE_CPB_FILL_HEADER; -#define PXE_PROTOCOL_ETHERNET_IP 0x0800 -#define PXE_PROTOCOL_ETHERNET_ARP 0x0806 -#define MAX_XMIT_FRAGMENTS 16 +#define PXE_PROTOCOL_ETHERNET_IP 0x0800 +#define PXE_PROTOCOL_ETHERNET_ARP 0x0806 +#define MAX_XMIT_FRAGMENTS 16 typedef struct s_pxe_cpb_fill_header_fragmented { /// /// Source and destination MAC addresses. These will be copied into /// the media header without doing byte swapping. /// - PXE_MAC_ADDR SrcAddr; - PXE_MAC_ADDR DestAddr; + PXE_MAC_ADDR SrcAddr; + PXE_MAC_ADDR DestAddr; /// /// Length of packet data in bytes (not including the media header). /// - PXE_UINT32 PacketLen; + PXE_UINT32 PacketLen; /// /// Protocol type. This will be copied into the media header without /// doing byte swapping. Protocol type numbers can be obtained from /// the Assigned Numbers RFC 1700. /// - PXE_MEDIA_PROTOCOL Protocol; + PXE_MEDIA_PROTOCOL Protocol; /// /// Length of the media header in bytes. /// - PXE_UINT16 MediaHeaderLen; + PXE_UINT16 MediaHeaderLen; /// /// Number of packet fragment descriptors. /// - PXE_UINT16 FragCnt; + PXE_UINT16 FragCnt; /// /// Reserved, must be set to zero. /// - PXE_UINT16 reserved; + PXE_UINT16 reserved; /// /// Array of packet fragment descriptors. The first byte of the media @@ -1655,60 +1646,59 @@ typedef struct s_pxe_cpb_fill_header_fragmented { /// /// Address of this packet fragment. /// - PXE_UINT64 FragAddr; + PXE_UINT64 FragAddr; /// /// Length of this packet fragment. /// - PXE_UINT32 FragLen; + PXE_UINT32 FragLen; /// /// Reserved, must be set to zero. /// - PXE_UINT32 reserved; + PXE_UINT32 reserved; } FragDesc[MAX_XMIT_FRAGMENTS]; -} -PXE_CPB_FILL_HEADER_FRAGMENTED; +} PXE_CPB_FILL_HEADER_FRAGMENTED; typedef struct s_pxe_cpb_transmit { /// /// Address of first byte of frame buffer. This is also the first byte /// of the media header. /// - PXE_UINT64 FrameAddr; + PXE_UINT64 FrameAddr; /// /// Length of the data portion of the frame buffer in bytes. Do not /// include the length of the media header. /// - PXE_UINT32 DataLen; + PXE_UINT32 DataLen; /// /// Length of the media header in bytes. /// - PXE_UINT16 MediaheaderLen; + PXE_UINT16 MediaheaderLen; /// /// Reserved, must be zero. /// - PXE_UINT16 reserved; + PXE_UINT16 reserved; } PXE_CPB_TRANSMIT; typedef struct s_pxe_cpb_transmit_fragments { /// /// Length of packet data in bytes (not including the media header). /// - PXE_UINT32 FrameLen; + PXE_UINT32 FrameLen; /// /// Length of the media header in bytes. /// - PXE_UINT16 MediaheaderLen; + PXE_UINT16 MediaheaderLen; /// /// Number of packet fragment descriptors. /// - PXE_UINT16 FragCnt; + PXE_UINT16 FragCnt; /// /// Array of frame fragment descriptors. The first byte of the first @@ -1718,75 +1708,73 @@ typedef struct s_pxe_cpb_transmit_fragments { /// /// Address of this frame fragment. /// - PXE_UINT64 FragAddr; + PXE_UINT64 FragAddr; /// /// Length of this frame fragment. /// - PXE_UINT32 FragLen; + PXE_UINT32 FragLen; /// /// Reserved, must be set to zero. /// - PXE_UINT32 reserved; + PXE_UINT32 reserved; } FragDesc[MAX_XMIT_FRAGMENTS]; -} -PXE_CPB_TRANSMIT_FRAGMENTS; +} PXE_CPB_TRANSMIT_FRAGMENTS; typedef struct s_pxe_cpb_receive { /// /// Address of first byte of receive buffer. This is also the first byte /// of the frame header. /// - PXE_UINT64 BufferAddr; + PXE_UINT64 BufferAddr; /// /// Length of receive buffer. This must be large enough to hold the /// received frame (media header + data). If the length of smaller than /// the received frame, data will be lost. /// - PXE_UINT32 BufferLen; + PXE_UINT32 BufferLen; /// /// Reserved, must be set to zero. /// - PXE_UINT32 reserved; + PXE_UINT32 reserved; } PXE_CPB_RECEIVE; typedef struct s_pxe_db_receive { /// /// Source and destination MAC addresses from media header. /// - PXE_MAC_ADDR SrcAddr; - PXE_MAC_ADDR DestAddr; + PXE_MAC_ADDR SrcAddr; + PXE_MAC_ADDR DestAddr; /// /// Length of received frame. May be larger than receive buffer size. /// The receive buffer will not be overwritten. This is how to tell /// if data was lost because the receive buffer was too small. /// - PXE_UINT32 FrameLen; + PXE_UINT32 FrameLen; /// /// Protocol type from media header. /// - PXE_MEDIA_PROTOCOL Protocol; + PXE_MEDIA_PROTOCOL Protocol; /// /// Length of media header in received frame. /// - PXE_UINT16 MediaHeaderLen; + PXE_UINT16 MediaHeaderLen; /// /// Type of receive frame. /// - PXE_FRAME_TYPE Type; + PXE_FRAME_TYPE Type; /// /// Reserved, must be zero. /// - PXE_UINT8 reserved[7]; - + PXE_UINT8 reserved[7]; } PXE_DB_RECEIVE; #pragma pack() |