diff options
Diffstat (limited to 'crypto/bn/bn_lcl.h')
-rw-r--r-- | crypto/bn/bn_lcl.h | 419 |
1 files changed, 0 insertions, 419 deletions
diff --git a/crypto/bn/bn_lcl.h b/crypto/bn/bn_lcl.h deleted file mode 100644 index 9c95992..0000000 --- a/crypto/bn/bn_lcl.h +++ /dev/null @@ -1,419 +0,0 @@ -/* crypto/bn/bn_lcl.h */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#ifndef HEADER_BN_LCL_H -#define HEADER_BN_LCL_H - -#include <openssl/bn.h> - -#ifdef __cplusplus -extern "C" { -#endif - - -/* - * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions - * - * - * For window size 'w' (w >= 2) and a random 'b' bits exponent, - * the number of multiplications is a constant plus on average - * - * 2^(w-1) + (b-w)/(w+1); - * - * here 2^(w-1) is for precomputing the table (we actually need - * entries only for windows that have the lowest bit set), and - * (b-w)/(w+1) is an approximation for the expected number of - * w-bit windows, not counting the first one. - * - * Thus we should use - * - * w >= 6 if b > 671 - * w = 5 if 671 > b > 239 - * w = 4 if 239 > b > 79 - * w = 3 if 79 > b > 23 - * w <= 2 if 23 > b - * - * (with draws in between). Very small exponents are often selected - * with low Hamming weight, so we use w = 1 for b <= 23. - */ -#if 1 -#define BN_window_bits_for_exponent_size(b) \ - ((b) > 671 ? 6 : \ - (b) > 239 ? 5 : \ - (b) > 79 ? 4 : \ - (b) > 23 ? 3 : 1) -#else -/* Old SSLeay/OpenSSL table. - * Maximum window size was 5, so this table differs for b==1024; - * but it coincides for other interesting values (b==160, b==512). - */ -#define BN_window_bits_for_exponent_size(b) \ - ((b) > 255 ? 5 : \ - (b) > 127 ? 4 : \ - (b) > 17 ? 3 : 1) -#endif - - - -/* Pentium pro 16,16,16,32,64 */ -/* Alpha 16,16,16,16.64 */ -#define BN_MULL_SIZE_NORMAL (16) /* 32 */ -#define BN_MUL_RECURSIVE_SIZE_NORMAL (16) /* 32 less than */ -#define BN_SQR_RECURSIVE_SIZE_NORMAL (16) /* 32 */ -#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */ -#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */ - -#if !defined(NO_ASM) && !defined(NO_INLINE_ASM) && !defined(PEDANTIC) -/* - * BN_UMULT_HIGH section. - * - * No, I'm not trying to overwhelm you when stating that the - * product of N-bit numbers is 2*N bits wide:-) No, I don't expect - * you to be impressed when I say that if the compiler doesn't - * support 2*N integer type, then you have to replace every N*N - * multiplication with 4 (N/2)*(N/2) accompanied by some shifts - * and additions which unavoidably results in severe performance - * penalties. Of course provided that the hardware is capable of - * producing 2*N result... That's when you normally start - * considering assembler implementation. However! It should be - * pointed out that some CPUs (most notably Alpha, PowerPC and - * upcoming IA-64 family:-) provide *separate* instruction - * calculating the upper half of the product placing the result - * into a general purpose register. Now *if* the compiler supports - * inline assembler, then it's not impossible to implement the - * "bignum" routines (and have the compiler optimize 'em) - * exhibiting "native" performance in C. That's what BN_UMULT_HIGH - * macro is about:-) - * - * <appro@fy.chalmers.se> - */ -# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT)) -# if defined(__DECC) -# include <c_asm.h> -# define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b)) -# elif defined(__GNUC__) -# define BN_UMULT_HIGH(a,b) ({ \ - register BN_ULONG ret; \ - asm ("umulh %1,%2,%0" \ - : "=r"(ret) \ - : "r"(a), "r"(b)); \ - ret; }) -# endif /* compiler */ -# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG) -# if defined(__GNUC__) -# define BN_UMULT_HIGH(a,b) ({ \ - register BN_ULONG ret; \ - asm ("mulhdu %0,%1,%2" \ - : "=r"(ret) \ - : "r"(a), "r"(b)); \ - ret; }) -# endif /* compiler */ -# endif /* cpu */ -#endif /* NO_ASM */ - -/************************************************************* - * Using the long long type - */ -#define Lw(t) (((BN_ULONG)(t))&BN_MASK2) -#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2) - -/* This is used for internal error checking and is not normally used */ -#ifdef BN_DEBUG -# include <assert.h> -# define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax); -#else -# define bn_check_top(a) -#endif - -/* This macro is to add extra stuff for development checking */ -#ifdef BN_DEBUG -#define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA)) -#else -#define bn_set_max(r) -#endif - -/* These macros are used to 'take' a section of a bignum for read only use */ -#define bn_set_low(r,a,n) \ - { \ - (r)->top=((a)->top > (n))?(n):(a)->top; \ - (r)->d=(a)->d; \ - (r)->neg=(a)->neg; \ - (r)->flags|=BN_FLG_STATIC_DATA; \ - bn_set_max(r); \ - } - -#define bn_set_high(r,a,n) \ - { \ - if ((a)->top > (n)) \ - { \ - (r)->top=(a)->top-n; \ - (r)->d= &((a)->d[n]); \ - } \ - else \ - (r)->top=0; \ - (r)->neg=(a)->neg; \ - (r)->flags|=BN_FLG_STATIC_DATA; \ - bn_set_max(r); \ - } - -#ifdef BN_LLONG -#define mul_add(r,a,w,c) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)w * (a) + (r) + (c); \ - (r)= Lw(t); \ - (c)= Hw(t); \ - } - -#define mul(r,a,w,c) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)w * (a) + (c); \ - (r)= Lw(t); \ - (c)= Hw(t); \ - } - -#define sqr(r0,r1,a) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)(a)*(a); \ - (r0)=Lw(t); \ - (r1)=Hw(t); \ - } - -#elif defined(BN_UMULT_HIGH) -#define mul_add(r,a,w,c) { \ - BN_ULONG high,low,ret,tmp=(a); \ - ret = (r); \ - high= BN_UMULT_HIGH(w,tmp); \ - ret += (c); \ - low = (w) * tmp; \ - (c) = (ret<(c))?1:0; \ - (c) += high; \ - ret += low; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define mul(r,a,w,c) { \ - BN_ULONG high,low,ret,ta=(a); \ - low = (w) * ta; \ - high= BN_UMULT_HIGH(w,ta); \ - ret = low + (c); \ - (c) = high; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define sqr(r0,r1,a) { \ - BN_ULONG tmp=(a); \ - (r0) = tmp * tmp; \ - (r1) = BN_UMULT_HIGH(tmp,tmp); \ - } - -#else -/************************************************************* - * No long long type - */ - -#define LBITS(a) ((a)&BN_MASK2l) -#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l) -#define L2HBITS(a) ((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4) - -#define LLBITS(a) ((a)&BN_MASKl) -#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl) -#define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2) - -#define mul64(l,h,bl,bh) \ - { \ - BN_ULONG m,m1,lt,ht; \ - \ - lt=l; \ - ht=h; \ - m =(bh)*(lt); \ - lt=(bl)*(lt); \ - m1=(bl)*(ht); \ - ht =(bh)*(ht); \ - m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \ - ht+=HBITS(m); \ - m1=L2HBITS(m); \ - lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \ - (l)=lt; \ - (h)=ht; \ - } - -#define sqr64(lo,ho,in) \ - { \ - BN_ULONG l,h,m; \ - \ - h=(in); \ - l=LBITS(h); \ - h=HBITS(h); \ - m =(l)*(h); \ - l*=l; \ - h*=h; \ - h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \ - m =(m&BN_MASK2l)<<(BN_BITS4+1); \ - l=(l+m)&BN_MASK2; if (l < m) h++; \ - (lo)=l; \ - (ho)=h; \ - } - -#define mul_add(r,a,bl,bh,c) { \ - BN_ULONG l,h; \ - \ - h= (a); \ - l=LBITS(h); \ - h=HBITS(h); \ - mul64(l,h,(bl),(bh)); \ - \ - /* non-multiply part */ \ - l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ - (c)=(r); \ - l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ - (c)=h&BN_MASK2; \ - (r)=l; \ - } - -#define mul(r,a,bl,bh,c) { \ - BN_ULONG l,h; \ - \ - h= (a); \ - l=LBITS(h); \ - h=HBITS(h); \ - mul64(l,h,(bl),(bh)); \ - \ - /* non-multiply part */ \ - l+=(c); if ((l&BN_MASK2) < (c)) h++; \ - (c)=h&BN_MASK2; \ - (r)=l&BN_MASK2; \ - } -#endif /* !BN_LLONG */ - -void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb); -void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b); -void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b); -void bn_sqr_normal(BN_ULONG *r, BN_ULONG *a, int n, BN_ULONG *tmp); -void bn_sqr_comba8(BN_ULONG *r,BN_ULONG *a); -void bn_sqr_comba4(BN_ULONG *r,BN_ULONG *a); -int bn_cmp_words(BN_ULONG *a,BN_ULONG *b,int n); -void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t); -void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, - int tn, int n,BN_ULONG *t); -void bn_sqr_recursive(BN_ULONG *r,BN_ULONG *a, int n2, BN_ULONG *t); -void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n); -void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2, - BN_ULONG *t); -void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2, - BN_ULONG *t); - -#ifdef __cplusplus -} -#endif - -#endif |