aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2025-07-15hw/arm/xen-pvh: Remove unnecessary 'hw/xen/arch_hvm.h' headerPhilippe Mathieu-Daudé1-1/+0
"hw/xen/arch_hvm.h" only declares the arch_handle_ioreq() and arch_xen_set_memory() prototypes, which are not used by xen-pvh.c. Remove the unnecessary header inclusion. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20250715071528.46196-1-philmd@linaro.org>
2025-07-15vfio/migration: Max in-flight VFIO device state buffers size limitMaciej S. Szmigiero2-2/+28
Allow capping the maximum total size of in-flight VFIO device state buffers queued at the destination, otherwise a malicious QEMU source could theoretically cause the target QEMU to allocate unlimited amounts of memory for buffers-in-flight. Since this is not expected to be a realistic threat in most of VFIO live migration use cases and the right value depends on the particular setup disable this limit by default by setting it to UINT64_MAX. Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Link: https://lore.kernel.org/qemu-devel/4f7cad490988288f58e36b162d7a888ed7e7fd17.1752589295.git.maciej.szmigiero@oracle.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15vfio/migration: Add x-migration-load-config-after-iter VFIO propertyMaciej S. Szmigiero8-1/+122
This property allows configuring whether to start the config load only after all iterables were loaded, during non-iterables loading phase. Such interlocking is required for ARM64 due to this platform VFIO dependency on interrupt controller being loaded first. The property defaults to AUTO, which means ON for ARM, OFF for other platforms. Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Link: https://lore.kernel.org/qemu-devel/0e03c60dbc91f9a9ba2516929574df605b7dfcb4.1752589295.git.maciej.szmigiero@oracle.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15vfio/pci: Introduce x-pci-class-code optionTomita Moeko3-8/+28
Introduce x-pci-class-code option to allow users to override PCI class code of a device, similar to the existing x-pci-vendor-id option. Only the lower 24 bits of this option are used, though a uint32 is used here for determining whether the value is valid and set by user. Additionally, to ensure VGA ranges are only exposed on VGA devices, pci_register_vga() is now called in vfio_pci_config_setup(), after the class code override is completed. This is mainly intended for IGD devices that expose themselves either as VGA controller (primary display) or Display controller (non-primary display). The UEFI GOP driver depends on the device reporting a VGA controller class code (0x030000). Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250708145211.6179-1-tomitamoeko@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15hw/vfio-user: fix use of uninitialized variableJohn Levon1-5/+1
Coverity reported: CID 1611805: Uninitialized variables in vfio_user_dma_map(). This can occur in the happy path when ->async_ops was not set; as this doesn't typically happen, it wasn't caught during testing. Align both map and unmap implementations to initialize ret the same way to resolve this. Resolves: Coverity CID 1611805 Fixes: 18e899e6 ("vfio-user: implement VFIO_USER_DMA_MAP/UNMAP") Reported-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: John Levon <john.levon@nutanix.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Link: https://lore.kernel.org/qemu-devel/20250715115954.515819-5-john.levon@nutanix.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15hw/vfio-user: wait for proxy close correctlyJohn Levon1-4/+6
Coverity reported: CID 1611806: Concurrent data access violations (BAD_CHECK_OF_WAIT_COND) A wait is performed without a loop. If there is a spurious wakeup, the condition may not be satisfied. Fix this by checking ->state for VFIO_PROXY_CLOSED in a loop. Also rename the callback for clarity. Signed-off-by: John Levon <john.levon@nutanix.com> Reviewed-by: Mark Cave-Ayland <markcaveayland@nutanix.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250715115954.515819-4-john.levon@nutanix.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15hw/vfio: fix region fd initializationJohn Levon1-1/+5
We were not initializing the region fd array to -1, so we would accidentally try to close(0) on cleanup for any region that is not referenced. Fixes: 95cdb024 ("vfio: add region info cache") Signed-off-by: John Levon <john.levon@nutanix.com> Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250715115954.515819-3-john.levon@nutanix.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC ReleaseAnisa Su1-0/+88
FM DCD Management command 0x5605 implemented per CXL r3.2 Spec Section 7.6.7.6.6 Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-12-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC AddAnisa Su2-4/+113
FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5 Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-11-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: Create helper function to create DC Event Records from extentsAnisa Su3-37/+39
Prepatory patch for following FMAPI Add/Release Patches. Refactors part of qmp_cxl_process_dynamic_capacity_prescriptive() into a helper function to create DC Event Records and insert in the event log. Moves definition for CXL_NUM_EXTENTS_SUPPORTED to cxl.h so it can be accessed by cxl-mailbox-utils.c and cxl-events.c, where the helper function is defined. Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-10-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent ListsAnisa Su1-0/+76
FM DCD Management command 0x5603 implemented per CXL r3.2 Spec Section 7.6.7.6.4 Very similar to previously implemented command 0x4801. Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region ConfigAnisa Su2-3/+90
FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3 Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/mem: cxl_type3: Add DC Region bitmap lockAnisa Su1-0/+4
Add a lock on the bitmap of each CXLDCRegion in preparation for the next patch which implements FMAPI Set DC Region Configuration. This command can modify the block size, which means the region's bitmap must be updated accordingly. The lock becomes necessary when commands that add/release extents (meaning they update the bitmap too) are enabled on a different CCI than the CCI on which the FMAPI commands are enabled. Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: Move definition for dynamic_capacity_uuid and enum for DC event ↵Anisa Su1-15/+0
types to header Move definition/enum to cxl_events.h for shared use in next patch Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region ConfigAnisa Su1-0/+106
FM DCD Management command 0x5601 implemented per CXL r3.2 Spec Section 7.6.7.6.2 Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/mem: cxl_type3: Add dsmas_flags to CXLDCRegion structAnisa Su1-1/+7
Add booleans to DC Region struct to represent dsmas flags (defined in CDAT) in preparation for the next command, which returns the flags in the next mailbox command 0x5601. Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD InfoAnisa Su2-0/+63
FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1. Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Anisa Su <anisa.su@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/cxl: fix DC extent capacity trackingFan Ni2-8/+19
Per cxl r3.2 Section 9.13.3.3, extent capacity tracking should include extents in different states including added, pending, etc. Before the change, for the in-device extent number tracking purpose, we only have "total_extent_count" defined, which only tracks the number of extents accepted. However, we need to track number of extents in other states also, for now it is extents pending-to-add. To fix that, we introduce a new counter for dynamic capacity "nr_extents_accepted" which explicitly tracks number of the extents accepted by the hosts, and fix "total_extent_count" to include both accepted and pending extents counting. Signed-off-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20250714174509.1984430-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/aml-build: Build a root node in the PPTT tableYicong Yang1-1/+14
Currently we build the PPTT starting from the socket node and each socket will be a separate tree. For a multi-socket system it'll be hard for the OS to know the whole system is homogeneous or not (actually we're in the current implementation) since no parent node to telling the identical implementation informentation. Add a root node for indicating this. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com> Message-Id: <20250714173146.511-4-alireza.sanaee@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/aml-build: Set identical implementation flag for PPTT processor nodesYicong Yang1-3/+6
Per ACPI 6.5 Table 5.158: Processor Structure Flags, the identical implementation flag indicates whether all the children processors of this node share the same identical implementation revision. Currently Linux support parsing this field [1] and maybe used to identify the heterogeneous platform. Since qemu only support homogeneous emulation, set this flag for all the processor node to indicates the facts when building the PPTT table. Node leaf is an exception since spec says this flag should be ignored on leaf nodes by OSPM. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/acpi/pptt.c?h=v6.11-rc1#n810 Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com> Message-Id: <20250714173146.511-3-alireza.sanaee@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/arm/virt: Let virt support pci hotplug/unplug GED eventEric Auger1-0/+13
Set up the IO registers used to communicate between QEMU and ACPI. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-33-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/arm/virt: Minor code reshuffling in create_acpi_gedEric Auger1-4/+7
Use a local SysBusDevice handle. Also use the newly introduced sysbus_mmio_map_name which brings better readability about the region being mapped. GED device has regions which exist depending on some external properties and it becomes difficult to guess the index of a region. Better refer to a region by its name. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-32-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/core/sysbus: Introduce sysbus_mmio_map_name() helperEric Auger1-0/+11
Some sysbus devices have conditional mmio regions. This happens for instance with the hw/acpi/ged device. In that case it becomes difficult to predict which index a specific MMIO region corresponds to when one needs to mmio map the region. Introduce a new helper that takes the name of the region instead of its index. If the region is not found this returns -1. Otherwise it maps the corresponding index and returns this latter. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-31-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Support migration of AcpiPciHpStateEric Auger1-0/+20
Add a subsection to migrate the AcpiPciHpState state. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Prasad Pandit <pjp@fedoraproject.org> Message-Id: <20250714080639.2525563-30-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Prepare the device to react to PCI hotplug eventsEric Auger1-0/+35
QEMU will notify the OS about PCI hotplug/hotunplug events through GED interrupts. Let the GED device handle a new PCI hotplug event. On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK mutex held. The GED device uses a dedicated MMIO region that will be mapped by the machine code. At this point the GED still does not support PCI device hotplug in its TYPE_HOTPLUG_HANDLER implementation. This will come in a subsequent patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/pcihp: Remove root arg in acpi_pcihp_initEric Auger4-5/+13
Let pass the root bus to ich9 and piix4 through a property link instead of through an argument passed to acpi_pcihp_init(). Also make sure the root bus is set at the entry of acpi_pcihp_init(). The rationale of that change is to be consistent with the forecoming ARM implementation where the machine passes the root bus (steming from GPEX) to the GED device through a link property. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Call pcihp plug callbacks in hotplug handler implementationEric Auger1-0/+17
Add PCI device related code in the TYPE_HOTPLUG_HANDLER implementation. For a PCI device hotplug/hotunplug event, the code routes to acpi_pcihp_device callbacks (pre_plug_cb, plug_cb, unplug_request_cb, unplug_cb). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-27-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/arm/virt: Pass the bus on the ged creationEric Auger1-0/+1
The bus will be needed on ged realize for acpi pci hp setup. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-26-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Add a bus link propertyEric Auger1-0/+3
This property will be set by the machine code on the object creation. It will be used by acpi pcihp hotplug code. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-25-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/arm/virt-acpi-build: Modify the DSDT ACPI table to enable ACPI PCI hotplugEric Auger3-1/+19
Modify the DSDT ACPI table to enable ACPI PCI hotplug. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-24-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/arm/virt-acpi-build: Let non hotplug ports support static acpi-indexEric Auger2-0/+14
hw/arm/virt-acpi-build: Let non hotplug ports support static acpi-index Add the requested ACPI bits requested to support static acpi-index for non hotplug ports. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-22-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Move aml_pci_edsm to a generic placeEric Auger2-55/+56
Move aml_pci_edsm to pci-bridge.c since we want to reuse that for ARM and acpi-index support. Also rename it into build_pci_bridge_edsm. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-17-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Use AcpiPciHpState::root in acpi_set_pci_infoEric Auger1-7/+4
pcihp acpi_set_pci_info() generic code currently uses acpi_get_i386_pci_host() to retrieve the pci host bridge. To make it work also on ARM we get rid of that call and directly use AcpiPciHpState::root. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-16-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Move build_append_pci_bus_devices/pcihp_slots to pcihpEric Auger2-172/+173
We intend to reuse build_append_pci_bus_devices and build_append_pcihp_slots on ARM. So let's move them to hw/acpi/pcihp.c as well as all static helpers they use. No functional change intended. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-15-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Move build_append_notification_callback to pcihpEric Auger2-58/+58
We plan to reuse build_append_notification_callback() on ARM so let's move it to pcihp.c. No functional change intended. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-14-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/pcihp: Add an AmlRegionSpace arg to build_acpi_pci_hotplugEric Auger2-6/+6
On ARM we will put the operation regions in AML_SYSTEM_MEMORY. So let's allow this configuration. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-13-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Introduce build_append_pcihp_resources() helperEric Auger2-13/+20
Extract the code that reserves resources for ACPI PCI hotplug into a new helper named build_append_pcihp_resources() and move it to pcihp.c. We will reuse it on ARM. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-12-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/pci-host/gpex-acpi: Use build_pci_host_bridge_osc_methodEric Auger2-57/+6
gpex build_host_bridge_osc() and x86 originated build_pci_host_bridge_osc_method() are mostly identical. In GPEX, SUPP is set to CDW2 but is not further used. CTRL is same as Local0. So let gpex code reuse build_pci_host_bridge_osc_method() and remove build_host_bridge_osc(). Also add an imply ACPI_PCI clause along with PCI_EXPRESS_GENERIC_BRIDGE to compile hw/acpi/pci.c when its dependency is resolved (ie. CONFIG_ACPI_PCI). This is requested to link qemu-system-mips64el. The disassembled DSDT difference is given below: * Original Table Header: * Signature "DSDT" - * Length 0x00001A4F (6735) + * Length 0x00001A35 (6709) * Revision 0x02 - * Checksum 0xBF + * Checksum 0xDD * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -1849,27 +1849,26 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPC ", 0x00000001) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) - SUPP = CDW2 /* \_SB_.PCI0._OSC.CDW2 */ - CTRL = CDW3 /* \_SB_.PCI0._OSC.CDW3 */ - CTRL &= 0x1F + Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */ + Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } - If ((CDW3 != CTRL)) + If ((CDW3 != Local0)) { CDW1 |= 0x10 } - CDW3 = CTRL /* \_SB_.PCI0.CTRL */ - Return (Arg3) + CDW3 = Local0 } Else { CDW1 |= 0x04 - Return (Arg3) } + + Return (Arg3) } Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-10-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Turn build_q35_osc_method into a generic methodEric Auger2-52/+52
GPEX acpi_dsdt_add_pci_osc() does basically the same as build_q35_osc_method(). Rename build_q35_osc_method() into build_pci_host_bridge_osc_method() and move it into hw/acpi/pci.c. In a subsequent patch we will use this later in place of acpi_dsdt_add_pci_osc(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/pci-host/gpex-acpi: Use GED acpi pcihp propertyEric Auger2-1/+11
Retrieve the acpi pcihp property value from the ged. In case this latter is not set, PCI native hotplug is used on pci0. For expander bridges we keep pci native hotplug, as done on x86 q35. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-8-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Add a acpi-pci-hotplug-with-bridge-support propertyEric Auger1-0/+2
A new boolean property is introduced. This will be used to turn ACPI PCI hotplug support. By default it is unset. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/pci-host/gpex-acpi: Split host bridge OSC and DSM generationEric Auger1-11/+21
acpi_dsdt_add_pci_osc() name is confusing as it gives the impression it appends the _OSC method but in fact it also appends the _DSM method for the host bridge. Let's split the function into two separate ones and let them return the method Aml pointer instead. This matches the way it is done on x86 (build_q35_osc_method). In a subsequent patch we will replace the gpex method by the q35 implementation that will become shared between ARM and x86. acpi_dsdt_add_host_bridge_methods is a new top helper that generates both the _OSC and _DSM methods. We take the opportunity to move SUPP and CTRL in the _osc method that use them. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-6-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/pci-host/gpex-acpi: Add native_pci_hotplug arg to acpi_dsdt_add_pci_oscEric Auger1-7/+8
Add a new argument to acpi_dsdt_add_pci_osc to be able to disable native pci hotplug. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi: Rename and move build_x86_acpi_pci_hotplug to pcihpEric Auger3-179/+175
We plan to reuse build_x86_acpi_pci_hotplug() implementation for ARM so let's move the code to generic pcihp. Associated static aml_pci_pdsm() helper is also moved along. build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug(). No code change intended. Also fix the reference to acpi_pci_hotplug.rst documentation Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/i386/acpi-build: Make aml_pci_device_dsm() staticEric Auger1-1/+1
No need to export aml_pci_device_dsm() as it is only used in hw/i386/acpi-build.c. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/virtio: Build various files oncePhilippe Mathieu-Daudé3-12/+15
Now that various VirtIO files don't use target specific API anymore, we can move them to the system_ss[] source set to build them once. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20250708215320.70426-9-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15qemu: Declare all load/store helper in 'qemu/bswap.h'Philippe Mathieu-Daudé24-15/+13
Restrict "exec/tswap.h" to the tswap*() methods, move the load/store helpers with the other ones declared in "qemu/bswap.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20250708215320.70426-8-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15qemu: Convert target_words_bigendian() to TargetInfo APIPhilippe Mathieu-Daudé3-3/+3
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20250708215320.70426-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15qemu/target-info: Factor target_arch() outPhilippe Mathieu-Daudé1-5/+3
To keep "qemu/target-info.h" self-contained to native types, declare target_arch() -- which returns a QAPI type -- in "qemu/target-info-qapi.h". No logical change. Keeping native types in "qemu/target-info.h" is necessary to keep building tests such tests/tcg/plugins/mem.c, as per the comment added in commit ecbcc9ead2f ("tests/tcg: add a system test to check memory instrumentation"): /* * plugins should not include anything from QEMU aside from the * API header. However as this is a test plugin to exercise the * internals of QEMU and we want to avoid needless code duplication we * do so here. bswap.h is pretty self-contained although it needs a * few things provided by compiler.h. */ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20250708215320.70426-3-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15intel_iommu: Add support for ATSCLEMENT MATHIEU--DRIF1-0/+63
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com> Message-Id: <20250628180226.133285-11-clement.mathieu--drif@eviden.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-09-18 22:13:30 +0000