aboutsummaryrefslogtreecommitdiff
path: root/docs/devel
diff options
context:
space:
mode:
Diffstat (limited to 'docs/devel')
-rw-r--r--docs/devel/code-provenance.rst338
-rw-r--r--docs/devel/index-process.rst1
-rw-r--r--docs/devel/migration/CPR.rst5
-rw-r--r--docs/devel/migration/main.rst4
-rw-r--r--docs/devel/migration/postcopy.rst36
-rw-r--r--docs/devel/migration/vfio.rst35
-rw-r--r--docs/devel/qapi-code-gen.rst28
-rw-r--r--docs/devel/qapi-domain.rst35
-rw-r--r--docs/devel/rust.rst31
-rw-r--r--docs/devel/submitting-a-patch.rst65
-rw-r--r--docs/devel/testing/functional.rst2
-rw-r--r--docs/devel/testing/main.rst4
-rw-r--r--docs/devel/tracing.rst2
13 files changed, 505 insertions, 81 deletions
diff --git a/docs/devel/code-provenance.rst b/docs/devel/code-provenance.rst
new file mode 100644
index 0000000..b5aae2e
--- /dev/null
+++ b/docs/devel/code-provenance.rst
@@ -0,0 +1,338 @@
+.. _code-provenance:
+
+Code provenance
+===============
+
+Certifying patch submissions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The QEMU community **mandates** all contributors to certify provenance of
+patch submissions they make to the project. To put it another way,
+contributors must indicate that they are legally permitted to contribute to
+the project.
+
+Certification is achieved with a low overhead by adding a single line to the
+bottom of every git commit::
+
+ Signed-off-by: YOUR NAME <YOUR@EMAIL>
+
+The addition of this line asserts that the author of the patch is contributing
+in accordance with the clauses specified in the
+`Developer's Certificate of Origin <https://developercertificate.org>`__:
+
+.. _dco:
+
+ Developer's Certificate of Origin 1.1
+
+ By making a contribution to this project, I certify that:
+
+ (a) The contribution was created in whole or in part by me and I
+ have the right to submit it under the open source license
+ indicated in the file; or
+
+ (b) The contribution is based upon previous work that, to the best
+ of my knowledge, is covered under an appropriate open source
+ license and I have the right under that license to submit that
+ work with modifications, whether created in whole or in part
+ by me, under the same open source license (unless I am
+ permitted to submit under a different license), as indicated
+ in the file; or
+
+ (c) The contribution was provided directly to me by some other
+ person who certified (a), (b) or (c) and I have not modified
+ it.
+
+ (d) I understand and agree that this project and the contribution
+ are public and that a record of the contribution (including all
+ personal information I submit with it, including my sign-off) is
+ maintained indefinitely and may be redistributed consistent with
+ this project or the open source license(s) involved.
+
+The name used with "Signed-off-by" does not need to be your legal name, nor
+birth name, nor appear on any government ID. It is the identity you choose to
+be known by in the community, but should not be anonymous, nor misrepresent
+whom you are.
+
+It is generally expected that the name and email addresses used in one of the
+``Signed-off-by`` lines, matches that of the git commit ``Author`` field.
+It's okay if you subscribe or contribute to the list via more than one
+address, but using multiple addresses in one commit just confuses
+things.
+
+If the person sending the mail is not one of the patch authors, they are
+nonetheless expected to add their own ``Signed-off-by`` to comply with the
+DCO clause (c).
+
+Multiple authorship
+~~~~~~~~~~~~~~~~~~~
+
+It is not uncommon for a patch to have contributions from multiple authors. In
+this scenario, git commits will usually be expected to have a ``Signed-off-by``
+line for each contributor involved in creation of the patch. Some edge cases:
+
+ * The non-primary author's contributions were so trivial that they can be
+ considered not subject to copyright. In this case the secondary authors
+ need not include a ``Signed-off-by``.
+
+ This case most commonly applies where QEMU reviewers give short snippets
+ of code as suggested fixes to a patch. The reviewers don't need to have
+ their own ``Signed-off-by`` added unless their code suggestion was
+ unusually large, but it is common to add ``Suggested-by`` as a credit
+ for non-trivial code.
+
+ * Both contributors work for the same employer and the employer requires
+ copyright assignment.
+
+ It can be said that in this case a ``Signed-off-by`` is indicating that
+ the person has permission to contribute from their employer who is the
+ copyright holder. It is nonetheless still preferable to include a
+ ``Signed-off-by`` for each contributor, as in some countries employees are
+ not able to assign copyright to their employer, and it also covers any
+ time invested outside working hours.
+
+When multiple ``Signed-off-by`` tags are present, they should be strictly kept
+in order of authorship, from oldest to newest.
+
+Other commit tags
+~~~~~~~~~~~~~~~~~
+
+While the ``Signed-off-by`` tag is mandatory, there are a number of other tags
+that are commonly used during QEMU development:
+
+ * **``Reviewed-by``**: when a QEMU community member reviews a patch on the
+ mailing list, if they consider the patch acceptable, they should send an
+ email reply containing a ``Reviewed-by`` tag. Subsystem maintainers who
+ review a patch should add this even if they are also adding their
+ ``Signed-off-by`` to the same commit.
+
+ * **``Acked-by``**: when a QEMU subsystem maintainer approves a patch that
+ touches their subsystem, but intends to allow a different maintainer to
+ queue it and send a pull request, they would send a mail containing a
+ ``Acked-by`` tag. Where a patch touches multiple subsystems, ``Acked-by``
+ only implies review of the maintainers' own areas of responsibility. If a
+ maintainer wants to indicate they have done a full review they should use
+ a ``Reviewed-by`` tag.
+
+ * **``Tested-by``**: when a QEMU community member has functionally tested the
+ behaviour of the patch in some manner, they should send an email reply
+ containing a ``Tested-by`` tag.
+
+ * **``Reported-by``**: when a QEMU community member reports a problem via the
+ mailing list, or some other informal channel that is not the issue tracker,
+ it is good practice to credit them by including a ``Reported-by`` tag on
+ any patch fixing the issue. When the problem is reported via the GitLab
+ issue tracker, however, it is sufficient to just include a link to the
+ issue.
+
+ * **``Suggested-by``**: when a reviewer or other 3rd party makes non-trivial
+ suggestions for how to change a patch, it is good practice to credit them
+ by including a ``Suggested-by`` tag.
+
+Subsystem maintainer requirements
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When a subsystem maintainer accepts a patch from a contributor, in addition to
+the normal code review points, they are expected to validate the presence of
+suitable ``Signed-off-by`` tags.
+
+At the time they queue the patch in their subsystem tree, the maintainer
+**must** also then add their own ``Signed-off-by`` to indicate that they have
+done the aforementioned validation. This is in addition to any of their own
+``Reviewed-by`` tags the subsystem maintainer may wish to include.
+
+When the maintainer modifies the patch after pulling into their tree, they
+should record their contribution. This is typically done via a note in the
+commit message, just prior to the maintainer's ``Signed-off-by``::
+
+ Signed-off-by: Cory Contributor <cory.contributor@example.com>
+ [Comment rephrased for clarity]
+ Signed-off-by: Mary Maintainer <mary.maintainer@mycorp.test>
+
+
+Tools for adding ``Signed-off-by``
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are a variety of ways tools can support adding ``Signed-off-by`` tags
+for patches, avoiding the need for contributors to manually type in this
+repetitive text each time.
+
+git commands
+^^^^^^^^^^^^
+
+When creating, or amending, a commit the ``-s`` flag to ``git commit`` will
+append a suitable line matching the configured git author details.
+
+If preparing patches using the ``git format-patch`` tool, the ``-s`` flag can
+be used to append a suitable line in the emails it creates, without modifying
+the local commits. Alternatively to modify all the local commits on a branch::
+
+ git rebase master -x 'git commit --amend --no-edit -s'
+
+emacs
+^^^^^
+
+In the file ``$HOME/.emacs.d/abbrev_defs`` add:
+
+.. code:: elisp
+
+ (define-abbrev-table 'global-abbrev-table
+ '(
+ ("8rev" "Reviewed-by: YOUR NAME <your@email.addr>" nil 1)
+ ("8ack" "Acked-by: YOUR NAME <your@email.addr>" nil 1)
+ ("8test" "Tested-by: YOUR NAME <your@email.addr>" nil 1)
+ ("8sob" "Signed-off-by: YOUR NAME <your@email.addr>" nil 1)
+ ))
+
+with this change, if you type (for example) ``8rev`` followed by ``<space>``
+or ``<enter>`` it will expand to the whole phrase.
+
+vim
+^^^
+
+In the file ``$HOME/.vimrc`` add::
+
+ iabbrev 8rev Reviewed-by: YOUR NAME <your@email.addr>
+ iabbrev 8ack Acked-by: YOUR NAME <your@email.addr>
+ iabbrev 8test Tested-by: YOUR NAME <your@email.addr>
+ iabbrev 8sob Signed-off-by: YOUR NAME <your@email.addr>
+
+with this change, if you type (for example) ``8rev`` followed by ``<space>``
+or ``<enter>`` it will expand to the whole phrase.
+
+Re-starting abandoned work
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For a variety of reasons there are some patches that get submitted to QEMU but
+never merged. An unrelated contributor may decide (months or years later) to
+continue working from the abandoned patch and re-submit it with extra changes.
+
+The general principles when picking up abandoned work are:
+
+ * Continue to credit the original author for their work, by maintaining their
+ original ``Signed-off-by``
+ * Indicate where the original patch was obtained from (mailing list, bug
+ tracker, author's git repo, etc) when sending it for review
+ * Acknowledge the extra work of the new contributor by including their
+ ``Signed-off-by`` in the patch in addition to the orignal author's
+ * Indicate who is responsible for what parts of the patch. This is typically
+ done via a note in the commit message, just prior to the new contributor's
+ ``Signed-off-by``::
+
+ Signed-off-by: Some Person <some.person@example.com>
+ [Rebased and added support for 'foo']
+ Signed-off-by: New Person <new.person@mycorp.test>
+
+In complicated cases, or if otherwise unsure, ask for advice on the project
+mailing list.
+
+It is also recommended to attempt to contact the original author to let them
+know you are interested in taking over their work, in case they still intended
+to return to the work, or had any suggestions about the best way to continue.
+
+Inclusion of generated files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Files in patches contributed to QEMU are generally expected to be provided
+only in the preferred format for making modifications. The implication of
+this is that the output of code generators or compilers is usually not
+appropriate to contribute to QEMU.
+
+For reasons of practicality there are some exceptions to this rule, where
+generated code is permitted, provided it is also accompanied by the
+corresponding preferred source format. This is done where it is impractical
+to expect those building QEMU to run the code generation or compilation
+process. A non-exhaustive list of examples is:
+
+ * Images: where an bitmap image is created from a vector file it is common
+ to include the rendered bitmaps at desired resolution(s), since subtle
+ changes in the rasterization process / tools may affect quality. The
+ original vector file is expected to accompany any generated bitmaps.
+
+ * Firmware: QEMU includes pre-compiled binary ROMs for a variety of guest
+ firmwares. When such binary ROMs are contributed, the corresponding source
+ must also be provided, either directly, or through a git submodule link.
+
+ * Dockerfiles: the majority of the dockerfiles are automatically generated
+ from a canonical list of build dependencies maintained in tree, together
+ with the libvirt-ci git submodule link. The generated dockerfiles are
+ included in tree because it is desirable to be able to directly build
+ container images from a clean git checkout.
+
+ * eBPF: QEMU includes some generated eBPF machine code, since the required
+ eBPF compilation tools are not broadly available on all targetted OS
+ distributions. The corresponding eBPF C code for the binary is also
+ provided. This is a time-limited exception until the eBPF toolchain is
+ sufficiently broadly available in distros.
+
+In all cases above, the existence of generated files must be acknowledged
+and justified in the commit that introduces them.
+
+Tools which perform changes to existing code with deterministic algorithmic
+manipulation, driven by user specified inputs, are not generally considered
+to be "generators".
+
+For instance, using Coccinelle to convert code from one pattern to another
+pattern, or fixing documentation typos with a spell checker, or transforming
+code using sed / awk / etc, are not considered to be acts of code
+generation. Where an automated manipulation is performed on code, however,
+this should be declared in the commit message.
+
+At times contributors may use or create scripts/tools to generate an initial
+boilerplate code template which is then filled in to produce the final patch.
+The output of such a tool would still be considered the "preferred format",
+since it is intended to be a foundation for further human authored changes.
+Such tools are acceptable to use, provided there is clearly defined copyright
+and licensing for their output. Note in particular the caveats applying to AI
+content generators below.
+
+Use of AI content generators
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+TL;DR:
+
+ **Current QEMU project policy is to DECLINE any contributions which are
+ believed to include or derive from AI generated content. This includes
+ ChatGPT, Claude, Copilot, Llama and similar tools.**
+
+The increasing prevalence of AI-assisted software development results in a
+number of difficult legal questions and risks for software projects, including
+QEMU. Of particular concern is content generated by `Large Language Models
+<https://en.wikipedia.org/wiki/Large_language_model>`__ (LLMs).
+
+The QEMU community requires that contributors certify their patch submissions
+are made in accordance with the rules of the `Developer's Certificate of
+Origin (DCO) <dco>`.
+
+To satisfy the DCO, the patch contributor has to fully understand the
+copyright and license status of content they are contributing to QEMU. With AI
+content generators, the copyright and license status of the output is
+ill-defined with no generally accepted, settled legal foundation.
+
+Where the training material is known, it is common for it to include large
+volumes of material under restrictive licensing/copyright terms. Even where
+the training material is all known to be under open source licenses, it is
+likely to be under a variety of terms, not all of which will be compatible
+with QEMU's licensing requirements.
+
+How contributors could comply with DCO terms (b) or (c) for the output of AI
+content generators commonly available today is unclear. The QEMU project is
+not willing or able to accept the legal risks of non-compliance.
+
+The QEMU project thus requires that contributors refrain from using AI content
+generators on patches intended to be submitted to the project, and will
+decline any contribution if use of AI is either known or suspected.
+
+This policy does not apply to other uses of AI, such as researching APIs or
+algorithms, static analysis, or debugging, provided their output is not to be
+included in contributions.
+
+Examples of tools impacted by this policy includes GitHub's CoPilot, OpenAI's
+ChatGPT, Anthropic's Claude, and Meta's Code Llama, and code/content
+generation agents which are built on top of such tools.
+
+This policy may evolve as AI tools mature and the legal situation is
+clarifed. In the meanwhile, requests for exceptions to this policy will be
+evaluated by the QEMU project on a case by case basis. To be granted an
+exception, a contributor will need to demonstrate clarity of the license and
+copyright status for the tool's output in relation to its training model and
+code, to the satisfaction of the project maintainers.
diff --git a/docs/devel/index-process.rst b/docs/devel/index-process.rst
index cb7c664..5807752 100644
--- a/docs/devel/index-process.rst
+++ b/docs/devel/index-process.rst
@@ -13,6 +13,7 @@ Notes about how to interact with the community and how and where to submit patch
maintainers
style
submitting-a-patch
+ code-provenance
trivial-patches
stable-process
submitting-a-pull-request
diff --git a/docs/devel/migration/CPR.rst b/docs/devel/migration/CPR.rst
index 7897873..0a0fd4f 100644
--- a/docs/devel/migration/CPR.rst
+++ b/docs/devel/migration/CPR.rst
@@ -152,8 +152,7 @@ cpr-transfer mode
This mode allows the user to transfer a guest to a new QEMU instance
on the same host with minimal guest pause time, by preserving guest
RAM in place, albeit with new virtual addresses in new QEMU. Devices
-and their pinned memory pages will also be preserved in a future QEMU
-release.
+and their pinned memory pages are also preserved for VFIO and IOMMUFD.
The user starts new QEMU on the same host as old QEMU, with command-
line arguments to create the same machine, plus the ``-incoming``
@@ -322,6 +321,6 @@ Futures
cpr-transfer mode is based on a capability to transfer open file
descriptors from old to new QEMU. In the future, descriptors for
-vfio, iommufd, vhost, and char devices could be transferred,
+vhost, and char devices could be transferred,
preserving those devices and their kernel state without interruption,
even if they do not explicitly support live migration.
diff --git a/docs/devel/migration/main.rst b/docs/devel/migration/main.rst
index cdd4f4a..6493c1d 100644
--- a/docs/devel/migration/main.rst
+++ b/docs/devel/migration/main.rst
@@ -508,8 +508,8 @@ An iterative device must provide:
the point that stream bandwidth limits tell it to stop. Each call
generates one section.
- - A ``save_live_complete_precopy`` function that must transmit the
- last section for the device containing any remaining data.
+ - A ``save_complete`` function that must transmit the last section for
+ the device containing any remaining data.
- A ``load_state`` function used to load sections generated by
any of the save functions that generate sections.
diff --git a/docs/devel/migration/postcopy.rst b/docs/devel/migration/postcopy.rst
index 82e7a84..e319388 100644
--- a/docs/devel/migration/postcopy.rst
+++ b/docs/devel/migration/postcopy.rst
@@ -33,25 +33,6 @@ will now cause the transition from precopy to postcopy.
It can be issued immediately after migration is started or any
time later on. Issuing it after the end of a migration is harmless.
-Blocktime is a postcopy live migration metric, intended to show how
-long the vCPU was in state of interruptible sleep due to pagefault.
-That metric is calculated both for all vCPUs as overlapped value, and
-separately for each vCPU. These values are calculated on destination
-side. To enable postcopy blocktime calculation, enter following
-command on destination monitor:
-
-``migrate_set_capability postcopy-blocktime on``
-
-Postcopy blocktime can be retrieved by query-migrate qmp command.
-postcopy-blocktime value of qmp command will show overlapped blocking
-time for all vCPU, postcopy-vcpu-blocktime will show list of blocking
-time per vCPU.
-
-.. note::
- During the postcopy phase, the bandwidth limits set using
- ``migrate_set_parameter`` is ignored (to avoid delaying requested pages that
- the destination is waiting for).
-
Postcopy internals
==================
@@ -312,3 +293,20 @@ explicitly) to be sent in a separate preempt channel, rather than queued in
the background migration channel. Anyone who cares about latencies of page
faults during a postcopy migration should enable this feature. By default,
it's not enabled.
+
+Postcopy blocktime statistics
+-----------------------------
+
+Blocktime is a postcopy live migration metric, intended to show how
+long the vCPU was in state of interruptible sleep due to pagefault.
+That metric is calculated both for all vCPUs as overlapped value, and
+separately for each vCPU. These values are calculated on destination
+side. To enable postcopy blocktime calculation, enter following
+command on destination monitor:
+
+``migrate_set_capability postcopy-blocktime on``
+
+Postcopy blocktime can be retrieved by query-migrate qmp command.
+postcopy-blocktime value of qmp command will show overlapped blocking
+time for all vCPU, postcopy-vcpu-blocktime will show list of blocking
+time per vCPU.
diff --git a/docs/devel/migration/vfio.rst b/docs/devel/migration/vfio.rst
index 673e354..0790e50 100644
--- a/docs/devel/migration/vfio.rst
+++ b/docs/devel/migration/vfio.rst
@@ -75,12 +75,12 @@ VFIO implements the device hooks for the iterative approach as follows:
in the non-multifd mode.
In the multifd mode it just emits either a dummy EOS marker.
-* A ``save_live_complete_precopy`` function that sets the VFIO device in
- _STOP_COPY state and iteratively copies the data for the VFIO device until
- the vendor driver indicates that no data remains.
- In the multifd mode it just emits a dummy EOS marker.
+* A ``save_complete`` function that sets the VFIO device in _STOP_COPY
+ state and iteratively copies the data for the VFIO device until the
+ vendor driver indicates that no data remains. In the multifd mode it
+ just emits a dummy EOS marker.
-* A ``save_live_complete_precopy_thread`` function that in the multifd mode
+* A ``save_complete_precopy_thread`` function that in the multifd mode
provides thread handler performing multifd device state transfer.
It sets the VFIO device to _STOP_COPY state, iteratively reads the data
from the VFIO device and queues it for multifd transmission until the vendor
@@ -195,12 +195,12 @@ Live migration save path
|
Then the VFIO device is put in _STOP_COPY state
(FINISH_MIGRATE, _ACTIVE, _STOP_COPY)
- .save_live_complete_precopy() is called for each active device
+ .save_complete() is called for each active device
For the VFIO device: in the non-multifd mode iterate in
- .save_live_complete_precopy() until
+ .save_complete() until
pending data is 0
In the multifd mode this iteration is done in
- .save_live_complete_precopy_thread() instead.
+ .save_complete_precopy_thread() instead.
|
(POSTMIGRATE, _COMPLETED, _STOP_COPY)
Migraton thread schedules cleanup bottom half and exits
@@ -247,3 +247,22 @@ The multifd VFIO device state transfer is controlled by
"x-migration-multifd-transfer" VFIO device property. This property defaults to
AUTO, which means that VFIO device state transfer via multifd channels is
attempted in configurations that otherwise support it.
+
+Since the target QEMU needs to load device state buffers in-order it needs to
+queue incoming buffers until they can be loaded into the device.
+This means that a malicious QEMU source could theoretically cause the target
+QEMU to allocate unlimited amounts of memory for such buffers-in-flight.
+
+The "x-migration-max-queued-buffers-size" property allows capping the total size
+of these VFIO device state buffers queued at the destination.
+
+Because a malicious QEMU source causing OOM on the target is not expected to be
+a realistic threat in most of VFIO live migration use cases and the right value
+depends on the particular setup by default this queued buffers size limit is
+disabled by setting it to UINT64_MAX.
+
+Some host platforms (like ARM64) require that VFIO device config is loaded only
+after all iterables were loaded, during non-iterables loading phase.
+Such interlocking is controlled by "x-migration-load-config-after-iter" VFIO
+device property, which in its default setting (AUTO) does so only on platforms
+that actually require it.
diff --git a/docs/devel/qapi-code-gen.rst b/docs/devel/qapi-code-gen.rst
index 231cc0f..dfdbeac 100644
--- a/docs/devel/qapi-code-gen.rst
+++ b/docs/devel/qapi-code-gen.rst
@@ -876,25 +876,35 @@ structuring content.
Headings and subheadings
~~~~~~~~~~~~~~~~~~~~~~~~
-A free-form documentation comment containing a line which starts with
-some ``=`` symbols and then a space defines a section heading::
+Free-form documentation does not start with ``@SYMBOL`` and can contain
+arbitrary rST markup. Headings can be marked up using the standard rST
+syntax::
##
- # = This is a top level heading
+ # *************************
+ # This is a level 2 heading
+ # *************************
#
# This is a free-form comment which will go under the
# top level heading.
##
##
- # == This is a second level heading
+ # This is a third level heading
+ # ==============================
+ #
+ # Level 4
+ # _______
+ #
+ # Level 5
+ # ^^^^^^^
+ #
+ # Level 6
+ # """""""
##
-A heading line must be the first line of the documentation
-comment block.
-
-Section headings must always be correctly nested, so you can only
-define a third-level heading inside a second-level heading, and so on.
+Level 1 headings are reserved for use by the generated documentation
+page itself, leaving level 2 as the highest level that should be used.
Documentation markup
diff --git a/docs/devel/qapi-domain.rst b/docs/devel/qapi-domain.rst
index 1123872..fe540d1 100644
--- a/docs/devel/qapi-domain.rst
+++ b/docs/devel/qapi-domain.rst
@@ -9,7 +9,7 @@ in Sphinx is provided by the QAPI Domain, located in
`Python Domain
<https://www.sphinx-doc.org/en/master/usage/domains/python.html>`_
included with Sphinx, but provides special directives and roles
-speciically for annotating and documenting QAPI definitions
+for annotating and documenting QAPI definitions
specifically.
A `Domain
@@ -101,7 +101,7 @@ without types. The QAPI domain uses this class for features, returns,
and enum values.
TypedField:
- * Creates a grouped, typed field. Multiple adjacent entres will be
+ * Creates a grouped, typed field. Multiple adjacent entries will be
merged into one section, and the content will form a bulleted list.
* *Must* take at least one argument, but supports up to two -
nominally, a name and a type.
@@ -242,6 +242,37 @@ Example::
}
+``:return-nodesc:``
+-------------------
+
+Document the return type of a QAPI command, without an accompanying
+description.
+
+:availability: This field list is only available in the body of the
+ Command directive.
+:syntax: ``:return-nodesc: type``
+:type: `sphinx.util.docfields.Field
+ <https://pydoc.dev/sphinx/latest/sphinx.util.docfields.Field.html?private=1>`_
+
+
+Example::
+
+ .. qapi:command:: query-replay
+ :since: 5.2
+
+ Retrieve the record/replay information. It includes current
+ instruction count which may be used for ``replay-break`` and
+ ``replay-seek`` commands.
+
+ :return-nodesc: ReplayInfo
+
+ .. qmp-example::
+
+ -> { "execute": "query-replay" }
+ <- { "return": {
+ "mode": "play", "filename": "log.rr", "icount": 220414 }
+ }
+
``:value:``
-----------
diff --git a/docs/devel/rust.rst b/docs/devel/rust.rst
index 171d908..b673753 100644
--- a/docs/devel/rust.rst
+++ b/docs/devel/rust.rst
@@ -37,12 +37,16 @@ output directory (typically ``rust/target/``). A vanilla invocation
of Cargo will complain that it cannot find the generated sources,
which can be fixed in different ways:
-* by using special shorthand targets in the QEMU build directory::
+* by using Makefile targets, provided by Meson, that run ``clippy`` or
+ ``rustdoc``:
make clippy
- make rustfmt
make rustdoc
+A target for ``rustfmt`` is also declared in ``rust/meson.build``:
+
+ make rustfmt
+
* by invoking ``cargo`` through the Meson `development environment`__
feature::
@@ -50,7 +54,7 @@ which can be fixed in different ways:
pyvenv/bin/meson devenv -w ../rust cargo fmt
If you are going to use ``cargo`` repeatedly, ``pyvenv/bin/meson devenv``
- will enter a shell where commands like ``cargo clippy`` just work.
+ will enter a shell where commands like ``cargo fmt`` just work.
__ https://mesonbuild.com/Commands.html#devenv
@@ -66,7 +70,7 @@ be run via ``meson test`` or ``make``::
make check-rust
-Building Rust code with ``--enable-modules`` is not supported yet.
+Note that doctests require all ``.o`` files from the build to be available.
Supported tools
'''''''''''''''
@@ -92,6 +96,11 @@ are missing:
architecture (VMState). Right now, VMState lacks type safety because
it is hard to place the ``VMStateField`` definitions in traits.
+* NUL-terminated file names with ``#[track_caller]`` are scheduled for
+ inclusion as ``#![feature(location_file_nul)]``, but it will be a while
+ before QEMU can use them. For now, there is special code in
+ ``util/error.c`` to support non-NUL-terminated file names.
+
* associated const equality would be nice to have for some users of
``callbacks::FnCall``, but is still experimental. ``ASSERT_IS_SOME``
replaces it.
@@ -151,10 +160,11 @@ module status
``callbacks`` complete
``cell`` stable
``errno`` complete
+``error`` stable
``irq`` complete
+``log`` proof of concept
``memory`` stable
``module`` complete
-``offset_of`` stable
``qdev`` stable
``qom`` stable
``sysbus`` stable
@@ -341,7 +351,7 @@ Writing procedural macros
'''''''''''''''''''''''''
By conventions, procedural macros are split in two functions, one
-returning ``Result<proc_macro2::TokenStream, MacroError>`` with the body of
+returning ``Result<proc_macro2::TokenStream, syn::Error>`` with the body of
the procedural macro, and the second returning ``proc_macro::TokenStream``
which is the actual procedural macro. The former's name is the same as
the latter with the ``_or_error`` suffix. The code for the latter is more
@@ -351,18 +361,19 @@ from the type after ``as`` in the invocation of ``parse_macro_input!``::
#[proc_macro_derive(Object)]
pub fn derive_object(input: TokenStream) -> TokenStream {
let input = parse_macro_input!(input as DeriveInput);
- let expanded = derive_object_or_error(input).unwrap_or_else(Into::into);
- TokenStream::from(expanded)
+ derive_object_or_error(input)
+ .unwrap_or_else(syn::Error::into_compile_error)
+ .into()
}
The ``qemu_api_macros`` crate has utility functions to examine a
``DeriveInput`` and perform common checks (e.g. looking for a struct
-with named fields). These functions return ``Result<..., MacroError>``
+with named fields). These functions return ``Result<..., syn::Error>``
and can be used easily in the procedural macro function::
fn derive_object_or_error(input: DeriveInput) ->
- Result<proc_macro2::TokenStream, MacroError>
+ Result<proc_macro2::TokenStream, Error>
{
is_c_repr(&input, "#[derive(Object)]")?;
diff --git a/docs/devel/submitting-a-patch.rst b/docs/devel/submitting-a-patch.rst
index 65c6407..dd1cf32 100644
--- a/docs/devel/submitting-a-patch.rst
+++ b/docs/devel/submitting-a-patch.rst
@@ -235,6 +235,38 @@ to another list.) ``git send-email`` (`step-by-step setup guide
works best for delivering the patch without mangling it, but
attachments can be used as a last resort on a first-time submission.
+.. _use_b4:
+
+Use B4
+~~~~~~
+
+The `b4`_ tool, used for Linux kernel development, can also be used for QEMU
+development. It is packaged in most distros and PyPi. The QEMU source tree
+includes a ``b4`` project configuration file at the root: ``.b4-config``.
+
+Example workflow to prepare a patch series:
+
+1. Start with a clean checkout of the ``master`` branch.
+2. Create a new series with a topical branch name using ``b4 prep -n descriptive-name``.
+ ``b4`` will create a ``b4/descriptive-name`` branch and switch to it.
+3. Commit your changes, following this page's guidelines about proper commit messages etc.
+4. Write a descriptive cover letter with ``b4 prep --edit-cover``.
+5. Add maintainer and reviewer CCs with ``b4 prep --auto-to-cc``. You can make
+ changes to Cc: and To: recipients by editing the cover letter.
+6. Run patch checks with ``b4 prep --check``.
+7. Optionally review the patches with ``b4 send --dry-run`` which will print the
+ raw patches in standard output.
+
+To send the patches, you can:
+
+- Setup ``git-send-email`` and use ``b4 send``, or
+- Export the patches to files using ``b4 send -o OUTPUT_DIR`` and send them manually.
+
+For more details, consult the `b4 documentation`_.
+
+.. _b4 documentation: https://b4.docs.kernel.org/
+.. _b4: https://github.com/mricon/b4/
+
.. _use_git_publish:
Use git-publish
@@ -344,28 +376,9 @@ Patch emails must include a ``Signed-off-by:`` line
Your patches **must** include a Signed-off-by: line. This is a hard
requirement because it's how you say "I'm legally okay to contribute
-this and happy for it to go into QEMU". The process is modelled after
-the `Linux kernel
-<http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/SubmittingPatches?id=f6f94e2ab1b33f0082ac22d71f66385a60d8157f#n297>`__
-policy.
-
-If you wrote the patch, make sure your "From:" and "Signed-off-by:"
-lines use the same spelling. It's okay if you subscribe or contribute to
-the list via more than one address, but using multiple addresses in one
-commit just confuses things. If someone else wrote the patch, git will
-include a "From:" line in the body of the email (different from your
-envelope From:) that will give credit to the correct author; but again,
-that author's Signed-off-by: line is mandatory, with the same spelling.
-
-The name used with "Signed-off-by" does not need to be your legal name,
-nor birth name, nor appear on any government ID. It is the identity you
-choose to be known by in the community, but should not be anonymous,
-nor misrepresent whom you are.
-
-There are various tooling options for automatically adding these tags
-include using ``git commit -s`` or ``git format-patch -s``. For more
-information see `SubmittingPatches 1.12
-<http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/SubmittingPatches?id=f6f94e2ab1b33f0082ac22d71f66385a60d8157f#n297>`__.
+this and happy for it to go into QEMU". For full guidance, read the
+:ref:`code-provenance` documentation.
+
.. _include_a_meaningful_cover_letter:
@@ -437,7 +450,7 @@ Retrieve an existing series
---------------------------
If you want to apply an existing series on top of your tree, you can simply use
-`b4 <https://github.com/mricon/b4>`__.
+`b4`_.
::
@@ -552,7 +565,11 @@ summary belongs. The `git-publish
<https://github.com/stefanha/git-publish>`__ script can help with
tracking a good summary across versions. Also, the `git-backport-diff
<https://github.com/codyprime/git-scripts>`__ script can help focus
-reviewers on what changed between revisions.
+reviewers on what changed between revisions. The ``b4`` tool automatically
+generates a version history section in the cover letter, including links to the
+previous versions on `Lore`_.
+
+.. _Lore: https://lore.kernel.org/
.. _tips_and_tricks:
diff --git a/docs/devel/testing/functional.rst b/docs/devel/testing/functional.rst
index 9e56dd1..3728bab 100644
--- a/docs/devel/testing/functional.rst
+++ b/docs/devel/testing/functional.rst
@@ -65,7 +65,7 @@ directory should be your build folder. For example::
The test framework will automatically purge any scratch files created during
the tests. If needing to debug a failed test, it is possible to keep these
-files around on disk by setting ```QEMU_TEST_KEEP_SCRATCH=1``` as an env
+files around on disk by setting ``QEMU_TEST_KEEP_SCRATCH=1`` as an env
variable. Any preserved files will be deleted the next time the test is run
without this variable set.
diff --git a/docs/devel/testing/main.rst b/docs/devel/testing/main.rst
index 6b18ed8..2b5cb0c 100644
--- a/docs/devel/testing/main.rst
+++ b/docs/devel/testing/main.rst
@@ -604,9 +604,9 @@ below steps to debug it:
2. Add "V=1" to the command line, try again, to see the verbose output.
3. Further add "DEBUG=1" to the command line. This will pause in a shell prompt
in the container right before testing starts. You could either manually
- build QEMU and run tests from there, or press Ctrl-D to let the Docker
+ build QEMU and run tests from there, or press :kbd:`Ctrl+d` to let the Docker
testing continue.
-4. If you press Ctrl-D, the same building and testing procedure will begin, and
+4. If you press :kbd:`Ctrl+d`, the same building and testing procedure will begin, and
will hopefully run into the error again. After that, you will be dropped to
the prompt for debug.
diff --git a/docs/devel/tracing.rst b/docs/devel/tracing.rst
index 043bed7..f4557ee 100644
--- a/docs/devel/tracing.rst
+++ b/docs/devel/tracing.rst
@@ -76,7 +76,7 @@ The "io/trace.h" file must be created manually with an #include of the
corresponding "trace/trace-<subdir>.h" file that will be generated in the
builddir::
- $ echo '#include "trace/trace-io.h"' >io/trace.h
+ $ (echo '/* SPDX-License-Identifier: GPL-2.0-or-later */' ; echo '#include "trace/trace-io.h"') >io/trace.h
While it is possible to include a trace.h file from outside a source file's own
sub-directory, this is discouraged in general. It is strongly preferred that
generated by cgit v1.1 at 2025-08-07 21:58:40 +0000