include/exec: Split out exec/cpu-interrupt.h

Some of these bits are actually common to all cpus; while the
reset have common reservations for target-specific usage.
While generic code cannot know what the target-specific usage is,
common code can know what to do with the bits, e.g. single-step.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

1 files changed, 70 insertions, 0 deletions

diff --git a/include/exec/cpu-interrupt.h b/include/exec/cpu-interrupt.h
new file mode 100644
index 0000000..4071519
--- /dev/null
+++ b/include/exec/cpu-interrupt.h
@@ -0,0 +1,70 @@
+/*
+ * Flags for use with cpu_interrupt()
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * SPDX-License-Identifier: LGPL-2.1-or-later
+ */
+
+#ifndef CPU_INTERRUPT_H
+#define CPU_INTERRUPT_H
+
+/*
+ * The numbers assigned here are non-sequential in order to preserve binary
+ * compatibility with the vmstate dump.  Bit 0 (0x0001) was previously used
+ * for CPU_INTERRUPT_EXIT, and is cleared when loading the vmstate dump.
+ */
+
+/*
+ * External hardware interrupt pending.
+ * This is typically used for interrupts from devices.
+ */
+#define CPU_INTERRUPT_HARD        0x0002
+
+/*
+ * Exit the current TB.  This is typically used when some system-level device
+ * makes some change to the memory mapping.  E.g. the a20 line change.
+ */
+#define CPU_INTERRUPT_EXITTB      0x0004
+
+/* Halt the CPU.  */
+#define CPU_INTERRUPT_HALT        0x0020
+
+/* Debug event pending.  */
+#define CPU_INTERRUPT_DEBUG       0x0080
+
+/* Reset signal.  */
+#define CPU_INTERRUPT_RESET       0x0400
+
+/*
+ * Several target-specific external hardware interrupts.  Each target/cpu.h
+ * should define proper names based on these defines.
+ */
+#define CPU_INTERRUPT_TGT_EXT_0   0x0008
+#define CPU_INTERRUPT_TGT_EXT_1   0x0010
+#define CPU_INTERRUPT_TGT_EXT_2   0x0040
+#define CPU_INTERRUPT_TGT_EXT_3   0x0200
+#define CPU_INTERRUPT_TGT_EXT_4   0x1000
+
+/*
+ * Several target-specific internal interrupts.  These differ from the
+ * preceding target-specific interrupts in that they are intended to
+ * originate from within the cpu itself, typically in response to some
+ * instruction being executed.  These, therefore, are not masked while
+ * single-stepping within the debugger.
+ */
+#define CPU_INTERRUPT_TGT_INT_0   0x0100
+#define CPU_INTERRUPT_TGT_INT_1   0x0800
+#define CPU_INTERRUPT_TGT_INT_2   0x2000
+
+/* First unused bit: 0x4000.  */
+
+/* The set of all bits that should be masked when single-stepping.  */
+#define CPU_INTERRUPT_SSTEP_MASK \
+    (CPU_INTERRUPT_HARD          \
+     | CPU_INTERRUPT_TGT_EXT_0   \
+     | CPU_INTERRUPT_TGT_EXT_1   \
+     | CPU_INTERRUPT_TGT_EXT_2   \
+     | CPU_INTERRUPT_TGT_EXT_3   \
+     | CPU_INTERRUPT_TGT_EXT_4)
+
+#endif /* CPU_INTERRUPT_H */