migration: Rename save_live_complete_precopy to save_complete

Now after merging the precopy and postcopy version of complete() hook,
rename the precopy version from save_live_complete_precopy() to
save_complete().

Dropping the "live" when at it, because it's in most cases not live when
happening (in precopy).

No functional change intended.

Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20250613140801.474264-7-peterx@redhat.com
[peterx: squash the fixup that covers a few more doc spots, per Juraj]
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>

9 files changed, 20 insertions, 20 deletions

diff --git a/docs/devel/migration/main.rst b/docs/devel/migration/main.rst
index cdd4f4a..6493c1d 100644
--- a/docs/devel/migration/main.rst
+++ b/docs/devel/migration/main.rst
@@ -508,8 +508,8 @@ An iterative device must provide:
     the point that stream bandwidth limits tell it to stop.  Each call
     generates one section.
 
-  - A ``save_live_complete_precopy`` function that must transmit the
-    last section for the device containing any remaining data.
+  - A ``save_complete`` function that must transmit the last section for
+    the device containing any remaining data.
 
   - A ``load_state`` function used to load sections generated by
     any of the save functions that generate sections.
diff --git a/docs/devel/migration/vfio.rst b/docs/devel/migration/vfio.rst
index 673e354..8ff5ab0 100644
--- a/docs/devel/migration/vfio.rst
+++ b/docs/devel/migration/vfio.rst
@@ -75,10 +75,10 @@ VFIO implements the device hooks for the iterative approach as follows:
   in the non-multifd mode.
   In the multifd mode it just emits either a dummy EOS marker.
 
-* A ``save_live_complete_precopy`` function that sets the VFIO device in
-  _STOP_COPY state and iteratively copies the data for the VFIO device until
-  the vendor driver indicates that no data remains.
-  In the multifd mode it just emits a dummy EOS marker.
+* A ``save_complete`` function that sets the VFIO device in _STOP_COPY
+  state and iteratively copies the data for the VFIO device until the
+  vendor driver indicates that no data remains.  In the multifd mode it
+  just emits a dummy EOS marker.
 
 * A ``save_live_complete_precopy_thread`` function that in the multifd mode
   provides thread handler performing multifd device state transfer.
@@ -195,9 +195,9 @@ Live migration save path
                                       |
                 Then the VFIO device is put in _STOP_COPY state
                      (FINISH_MIGRATE, _ACTIVE, _STOP_COPY)
-         .save_live_complete_precopy() is called for each active device
+               .save_complete() is called for each active device
               For the VFIO device: in the non-multifd mode iterate in
-                        .save_live_complete_precopy() until
+                             .save_complete() until
                                pending data is 0
 	          In the multifd mode this iteration is done in
 	          .save_live_complete_precopy_thread() instead.
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 08615f6..40f53ad 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -2518,7 +2518,7 @@ static void htab_save_cleanup(void *opaque)
 static SaveVMHandlers savevm_htab_handlers = {
     .save_setup = htab_save_setup,
     .save_live_iterate = htab_save_iterate,
-    .save_live_complete_precopy = htab_save_complete,
+    .save_complete = htab_save_complete,
     .save_cleanup = htab_save_cleanup,
     .load_state = htab_load,
 };
diff --git a/hw/s390x/s390-stattrib.c b/hw/s390x/s390-stattrib.c
index f74cf32..13a678a 100644
--- a/hw/s390x/s390-stattrib.c
+++ b/hw/s390x/s390-stattrib.c
@@ -338,7 +338,7 @@ static const TypeInfo qemu_s390_stattrib_info = {
 static SaveVMHandlers savevm_s390_stattrib_handlers = {
     .save_setup = cmma_save_setup,
     .save_live_iterate = cmma_save_iterate,
-    .save_live_complete_precopy = cmma_save_complete,
+    .save_complete = cmma_save_complete,
     .state_pending_exact = cmma_state_pending,
     .state_pending_estimate = cmma_state_pending,
     .save_cleanup = cmma_save_cleanup,
diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
index b76697bd..33a71f8 100644
--- a/hw/vfio/migration.c
+++ b/hw/vfio/migration.c
@@ -824,7 +824,7 @@ static const SaveVMHandlers savevm_vfio_handlers = {
     .state_pending_exact = vfio_state_pending_exact,
     .is_active_iterate = vfio_is_active_iterate,
     .save_live_iterate = vfio_save_iterate,
-    .save_live_complete_precopy = vfio_save_complete_precopy,
+    .save_complete = vfio_save_complete_precopy,
     .save_state = vfio_save_state,
     .load_setup = vfio_load_setup,
     .load_cleanup = vfio_load_cleanup,
diff --git a/include/migration/register.h b/include/migration/register.h
index e022195..2a26e76 100644
--- a/include/migration/register.h
+++ b/include/migration/register.h
@@ -78,7 +78,7 @@ typedef struct SaveVMHandlers {
     void (*save_cleanup)(void *opaque);
 
     /**
-     * @save_live_complete_precopy
+     * @save_complete
      *
      * Transmits the last section for the device containing any
      * remaining data at the end phase of migration.
@@ -95,7 +95,7 @@ typedef struct SaveVMHandlers {
      *
      * Returns zero to indicate success and negative for error
      */
-    int (*save_live_complete_precopy)(QEMUFile *f, void *opaque);
+    int (*save_complete)(QEMUFile *f, void *opaque);
 
     /**
      * @save_live_complete_precopy_thread (invoked in a separate thread)
@@ -103,7 +103,7 @@ typedef struct SaveVMHandlers {
      * Called at the end of a precopy phase from a separate worker thread
      * in configurations where multifd device state transfer is supported
      * in order to perform asynchronous transmission of the remaining data in
-     * parallel with @save_live_complete_precopy handlers.
+     * parallel with @save_complete handlers.
      * When postcopy is enabled, devices that support postcopy will skip this
      * step.
      *
diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
index 6ee3c32..a061aad 100644
--- a/migration/block-dirty-bitmap.c
+++ b/migration/block-dirty-bitmap.c
@@ -1248,7 +1248,7 @@ static bool dirty_bitmap_has_postcopy(void *opaque)
 
 static SaveVMHandlers savevm_dirty_bitmap_handlers = {
     .save_setup = dirty_bitmap_save_setup,
-    .save_live_complete_precopy = dirty_bitmap_save_complete,
+    .save_complete = dirty_bitmap_save_complete,
     .has_postcopy = dirty_bitmap_has_postcopy,
     .state_pending_exact = dirty_bitmap_state_pending,
     .state_pending_estimate = dirty_bitmap_state_pending,
diff --git a/migration/ram.c b/migration/ram.c
index 6bb4f13..ffd839f 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -4548,7 +4548,7 @@ void postcopy_preempt_shutdown_file(MigrationState *s)
 static SaveVMHandlers savevm_ram_handlers = {
     .save_setup = ram_save_setup,
     .save_live_iterate = ram_save_iterate,
-    .save_live_complete_precopy = ram_save_complete,
+    .save_complete = ram_save_complete,
     .has_postcopy = ram_has_postcopy,
     .state_pending_exact = ram_state_pending_exact,
     .state_pending_estimate = ram_state_pending_estimate,
diff --git a/migration/savevm.c b/migration/savevm.c
index 3e20f86..454e914 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1496,7 +1496,7 @@ void qemu_savevm_state_complete_postcopy(QEMUFile *f)
     int ret;
 
     QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
-        if (!se->ops || !se->ops->save_live_complete_precopy) {
+        if (!se->ops || !se->ops->save_complete) {
             continue;
         }
         if (se->ops->is_active) {
@@ -1509,7 +1509,7 @@ void qemu_savevm_state_complete_postcopy(QEMUFile *f)
         qemu_put_byte(f, QEMU_VM_SECTION_END);
         qemu_put_be32(f, se->section_id);
 
-        ret = se->ops->save_live_complete_precopy(f, se->opaque);
+        ret = se->ops->save_complete(f, se->opaque);
         trace_savevm_section_end(se->idstr, se->section_id, ret);
         save_section_footer(f, se);
         if (ret < 0) {
@@ -1583,7 +1583,7 @@ int qemu_savevm_state_complete_precopy_iterable(QEMUFile *f, bool in_postcopy)
         if (!se->ops ||
             (in_postcopy && se->ops->has_postcopy &&
              se->ops->has_postcopy(se->opaque)) ||
-            !se->ops->save_live_complete_precopy) {
+            !se->ops->save_complete) {
             continue;
         }
 
@@ -1598,7 +1598,7 @@ int qemu_savevm_state_complete_precopy_iterable(QEMUFile *f, bool in_postcopy)
 
         save_section_header(f, se, QEMU_VM_SECTION_END);
 
-        ret = se->ops->save_live_complete_precopy(f, se->opaque);
+        ret = se->ops->save_complete(f, se->opaque);
         trace_savevm_section_end(se->idstr, se->section_id, ret);
         save_section_footer(f, se);
         if (ret < 0) {