add arm-optimized memcpy implementation from bionic libc

the approach of this implementation was heavily investigated prior to
adopting it. attempts to obtain similar performance with pure C code
were capping out at about 75% of the performance of the asm, with
considerably larger code size, and were fragile in that the compiler
would sometimes compile part of memcpy into a call to itself.
therefore, just using the asm seems to be the best option.

this commit is the first to make use of the new subarch-specific asm
framework. the new armel directory is the location for arm asm that
should not be used for all arm subarchs, only the default one. armhf
is the name of the little-endian hardfloat-ABI subarch, which can use
the exact same asm. in both cases, the build system finds the asm by
following a memcpy.sub file.

the other two subarchs, armeb and armebhf, would need a big-endian
variant of this code. it would not be hard to adapt the code to big
endian, but I will hold off on doing so until there is demand for it.

2 files changed, 382 insertions, 0 deletions

diff --git a/src/string/armel/memcpy.s b/src/string/armel/memcpy.s
new file mode 100644
index 0000000..9f24a4f
--- /dev/null
+++ b/src/string/armel/memcpy.s
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+
+/*
+ * Optimized memcpy() for ARM.
+ *
+ * note that memcpy() always returns the destination pointer,
+ * so we have to preserve R0.
+  */
+
+/*
+ * This file has been modified from the original for use in musl libc.
+ * The main changes are: addition of .type memcpy,%function to make the
+ * code safely callable from thumb mode, adjusting the return
+ * instructions to be compatible with pre-thumb ARM cpus, and removal
+ * of prefetch code that is not compatible with older cpus.
+ */
+
+.global memcpy
+.type memcpy,%function
+memcpy:
+	/* The stack must always be 64-bits aligned to be compliant with the
+	 * ARM ABI. Since we have to save R0, we might as well save R4
+	 * which we can use for better pipelining of the reads below
+	 */
+        .fnstart
+        .save       {r0, r4, lr}
+        stmfd       sp!, {r0, r4, lr}
+        /* Making room for r5-r11 which will be spilled later */
+        .pad        #28
+        sub         sp, sp, #28
+
+        /* it simplifies things to take care of len<4 early */
+        cmp	r2, #4
+        blo	copy_last_3_and_return
+
+        /* compute the offset to align the source
+         * offset = (4-(src&3))&3 = -src & 3
+         */
+        rsb	r3, r1, #0
+        ands	r3, r3, #3
+        beq	src_aligned
+
+        /* align source to 32 bits. We need to insert 2 instructions between
+         * a ldr[b|h] and str[b|h] because byte and half-word instructions
+         * stall 2 cycles.
+         */
+        movs	r12, r3, lsl #31
+        sub	r2, r2, r3		/* we know that r3 <= r2 because r2 >= 4 */
+        ldrmib	r3, [r1], #1
+        ldrcsb	r4, [r1], #1
+        ldrcsb	r12,[r1], #1
+        strmib	r3, [r0], #1
+        strcsb	r4, [r0], #1
+        strcsb	r12,[r0], #1
+
+src_aligned:
+
+	/* see if src and dst are aligned together (congruent) */
+	eor	r12, r0, r1
+        tst	r12, #3
+        bne	non_congruent
+
+        /* Use post-incriment mode for stm to spill r5-r11 to reserved stack
+         * frame. Don't update sp.
+         */
+        stmea	sp, {r5-r11}
+
+        /* align the destination to a cache-line */
+        rsb	r3, r0, #0
+        ands	r3, r3, #0x1C
+        beq    	congruent_aligned32
+        cmp    	r3, r2
+        andhi	r3, r2, #0x1C
+
+        /* conditionnaly copies 0 to 7 words (length in r3) */
+        movs	r12, r3, lsl #28
+        ldmcsia	r1!, {r4, r5, r6, r7}	/* 16 bytes */
+        ldmmiia	r1!, {r8, r9}			/*  8 bytes */
+        stmcsia	r0!, {r4, r5, r6, r7}
+        stmmiia	r0!, {r8, r9}
+        tst    	r3, #0x4
+        ldrne	r10,[r1], #4			/*  4 bytes */
+        strne	r10,[r0], #4
+        sub    	r2, r2, r3
+
+congruent_aligned32:
+	/*
+ 	 * here source is aligned to 32 bytes.
+ 	 */
+
+cached_aligned32:
+        subs   	r2, r2, #32
+        blo    	less_than_32_left
+
+        /*
+         * We preload a cache-line up to 64 bytes ahead. On the 926, this will
+         * stall only until the requested world is fetched, but the linefill
+         * continues in the the background.
+         * While the linefill is going, we write our previous cache-line
+         * into the write-buffer (which should have some free space).
+         * When the linefill is done, the writebuffer will
+         * start dumping its content into memory
+         *
+         * While all this is going, we then load a full cache line into
+         * 8 registers, this cache line should be in the cache by now
+         * (or partly in the cache).
+         *
+         * This code should work well regardless of the source/dest alignment.
+         *
+         */
+
+        /* Align the preload register to a cache-line because the cpu does
+         * "critical word first" (the first word requested is loaded first).
+         */
+        @ bic    	r12, r1, #0x1F
+        @ add    	r12, r12, #64
+
+1:      ldmia  	r1!, { r4-r11 }
+        subs   	r2, r2, #32
+
+        /* 
+         * NOTE: if r12 is more than 64 ahead of r1, the following ldrhi
+         * for ARM9 preload will not be safely guarded by the preceding subs.
+         * When it is safely guarded the only possibility to have SIGSEGV here
+         * is because the caller overstates the length.
+         */
+        @ ldrhi  	r3, [r12], #32      /* cheap ARM9 preload */
+        stmia  	r0!, { r4-r11 }
+	bhs    	1b
+
+        add	r2, r2, #32
+
+less_than_32_left:
+	/*
+	 * less than 32 bytes left at this point (length in r2)
+	 */
+
+	/* skip all this if there is nothing to do, which should
+	 * be a common case (if not executed the code below takes
+	 * about 16 cycles)
+	 */
+	tst	r2, #0x1F
+        beq	1f
+
+        /* conditionnaly copies 0 to 31 bytes */
+        movs	r12, r2, lsl #28
+        ldmcsia	r1!, {r4, r5, r6, r7}	/* 16 bytes */
+        ldmmiia	r1!, {r8, r9}			/*  8 bytes */
+        stmcsia	r0!, {r4, r5, r6, r7}
+        stmmiia	r0!, {r8, r9}
+        movs	r12, r2, lsl #30
+        ldrcs	r3, [r1], #4			/*  4 bytes */
+        ldrmih	r4, [r1], #2			/*  2 bytes */
+        strcs	r3, [r0], #4
+        strmih	r4, [r0], #2
+        tst    	r2, #0x1
+        ldrneb	r3, [r1]				/*  last byte  */
+        strneb	r3, [r0]
+
+        /* we're done! restore everything and return */
+1:	ldmfd	sp!, {r5-r11}
+        ldmfd	sp!, {r0, r4, lr}
+        tst	lr, #1
+        moveq	pc, lr
+        bx	lr
+
+	/********************************************************************/
+
+non_congruent:
+	/*
+	 * here source is aligned to 4 bytes
+	 * but destination is not.
+	 *
+	 * in the code below r2 is the number of bytes read
+	 * (the number of bytes written is always smaller, because we have
+	 * partial words in the shift queue)
+	 */
+	cmp	r2, #4
+	blo	copy_last_3_and_return
+
+        /* Use post-incriment mode for stm to spill r5-r11 to reserved stack
+         * frame. Don't update sp.
+         */
+        stmea	sp, {r5-r11}
+
+        /* compute shifts needed to align src to dest */
+        rsb	r5, r0, #0
+        and	r5, r5, #3			/* r5 = # bytes in partial words */
+        mov	r12, r5, lsl #3		/* r12 = right */
+        rsb	lr, r12, #32		/* lr = left  */
+
+        /* read the first word */
+        ldr	r3, [r1], #4
+        sub	r2, r2, #4
+
+        /* write a partial word (0 to 3 bytes), such that destination
+         * becomes aligned to 32 bits (r5 = nb of words to copy for alignment)
+         */
+        movs	r5, r5, lsl #31
+        strmib	r3, [r0], #1
+        movmi	r3, r3, lsr #8
+        strcsb	r3, [r0], #1
+        movcs	r3, r3, lsr #8
+        strcsb	r3, [r0], #1
+        movcs	r3, r3, lsr #8
+
+        cmp	r2, #4
+        blo	partial_word_tail
+
+        /* Align destination to 32 bytes (cache line boundary) */
+1:	tst	r0, #0x1c
+        beq	2f
+        ldr	r5, [r1], #4
+        sub    	r2, r2, #4
+        orr	r4, r3, r5,		lsl lr
+        mov	r3, r5,			lsr r12
+        str	r4, [r0], #4
+        cmp    	r2, #4
+        bhs	1b
+        blo	partial_word_tail
+
+	/* copy 32 bytes at a time */
+2:	subs	r2, r2, #32
+	blo	less_than_thirtytwo
+
+        /* Use immediate mode for the shifts, because there is an extra cycle
+         * for register shifts, which could account for up to 50% of
+         * performance hit.
+         */
+
+        cmp	r12, #24
+        beq	loop24
+        cmp	r12, #8
+        beq	loop8
+
+loop16:
+        ldr    	r12, [r1], #4
+1:      mov    	r4, r12
+	ldmia	r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+        subs   	r2, r2, #32
+        ldrhs  	r12, [r1], #4
+	orr	r3, r3, r4, lsl #16
+        mov	r4, r4, lsr #16
+        orr	r4, r4, r5, lsl #16
+        mov	r5, r5, lsr #16
+        orr	r5, r5, r6, lsl #16
+        mov	r6, r6, lsr #16
+        orr	r6, r6, r7, lsl #16
+        mov	r7, r7, lsr #16
+        orr	r7, r7, r8, lsl #16
+        mov	r8, r8, lsr #16
+        orr	r8, r8, r9, lsl #16
+        mov	r9, r9, lsr #16
+        orr	r9, r9, r10, lsl #16
+        mov	r10, r10,		lsr #16
+        orr	r10, r10, r11, lsl #16
+        stmia	r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+        mov	r3, r11, lsr #16
+        bhs	1b
+        b	less_than_thirtytwo
+
+loop8:
+        ldr    	r12, [r1], #4
+1:      mov    	r4, r12
+	ldmia	r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+	subs	r2, r2, #32
+        ldrhs  	r12, [r1], #4
+        orr	r3, r3, r4, lsl #24
+        mov	r4, r4, lsr #8
+        orr	r4, r4, r5, lsl #24
+        mov	r5, r5, lsr #8
+        orr	r5, r5, r6, lsl #24
+        mov	r6, r6,	 lsr #8
+        orr	r6, r6, r7, lsl #24
+        mov	r7, r7,	 lsr #8
+        orr	r7, r7, r8,		lsl #24
+        mov	r8, r8,	 lsr #8
+        orr	r8, r8, r9,		lsl #24
+        mov	r9, r9,	 lsr #8
+        orr	r9, r9, r10,	lsl #24
+        mov	r10, r10, lsr #8
+        orr	r10, r10, r11,	lsl #24
+        stmia	r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+        mov	r3, r11, lsr #8
+        bhs	1b
+        b	less_than_thirtytwo
+
+loop24:
+        ldr    	r12, [r1], #4
+1:      mov    	r4, r12
+	ldmia	r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+        subs	r2, r2, #32
+        ldrhs  	r12, [r1], #4
+        orr	r3, r3, r4, lsl #8
+        mov	r4, r4, lsr #24
+        orr	r4, r4, r5, lsl #8
+        mov	r5, r5, lsr #24
+        orr	r5, r5, r6, lsl #8
+        mov	r6, r6, lsr #24
+        orr	r6, r6, r7, lsl #8
+        mov	r7, r7, lsr #24
+        orr	r7, r7, r8, lsl #8
+        mov	r8, r8, lsr #24
+        orr	r8, r8, r9, lsl #8
+        mov	r9, r9, lsr #24
+        orr	r9, r9, r10, lsl #8
+        mov	r10, r10, lsr #24
+        orr	r10, r10, r11, lsl #8
+        stmia	r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+        mov	r3, r11, lsr #24
+        bhs	1b
+
+less_than_thirtytwo:
+	/* copy the last 0 to 31 bytes of the source */
+	rsb	r12, lr, #32		/* we corrupted r12, recompute it  */
+        add	r2, r2, #32
+        cmp	r2, #4
+        blo	partial_word_tail
+
+1:	ldr	r5, [r1], #4
+        sub    	r2, r2, #4
+        orr	r4, r3, r5,		lsl lr
+        mov	r3,	r5,			lsr r12
+        str	r4, [r0], #4
+        cmp    	r2, #4
+        bhs	1b
+
+partial_word_tail:
+	/* we have a partial word in the input buffer */
+	movs	r5, lr, lsl #(31-3)
+	strmib	r3, [r0], #1
+        movmi	r3, r3, lsr #8
+        strcsb	r3, [r0], #1
+        movcs	r3, r3, lsr #8
+        strcsb	r3, [r0], #1
+
+        /* Refill spilled registers from the stack. Don't update sp. */
+        ldmfd	sp, {r5-r11}
+
+copy_last_3_and_return:
+	movs	r2, r2, lsl #31	/* copy remaining 0, 1, 2 or 3 bytes */
+        ldrmib	r2, [r1], #1
+        ldrcsb	r3, [r1], #1
+        ldrcsb	r12,[r1]
+        strmib	r2, [r0], #1
+        strcsb	r3, [r0], #1
+        strcsb	r12,[r0]
+
+        /* we're done! restore sp and spilled registers and return */
+        add    	sp,  sp, #28
+        ldmfd	sp!, {r0, r4, lr}
+        tst	lr, #1
+        moveq	pc, lr
+        bx	lr
diff --git a/src/string/armel/memcpy.sub b/src/string/armel/memcpy.sub
new file mode 100644
index 0000000..543f583
--- /dev/null
+++ b/src/string/armel/memcpy.sub
@@ -0,0 +1 @@
+memcpy.s