| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Teach the IR parser and writer to support metadata on ifuncs, and update
documentation.
In PR #153049, we have a use case of attaching the `!associated`
metadata to an ifunc.
Since an ifunc is similar to a function declaration, it seems natural to
allow metadata on ifuncs.
Currently, the metadata API allows adding Metadata to
llvm::GlobalObject, so the in-memory IR allows for metadata on ifuncs,
but the IR reader/writer is not aware of that.
---------
Co-authored-by: Wael Yehia <wyehia@ca.ibm.com>
|
|
This introduces a new `ptrtoaddr` instruction which is similar to
`ptrtoint` but has two differences:
1) Unlike `ptrtoint`, `ptrtoaddr` does not capture provenance
2) `ptrtoaddr` only extracts (and then extends/truncates) the low
index-width bits of the pointer
For most architectures, difference 2) does not matter since index (address)
width and pointer representation width are the same, but this does make a
difference for architectures that have pointers that aren't just plain
integer addresses such as AMDGPU fat pointers or CHERI capabilities.
This commit introduces textual and bitcode IR support as well as basic code
generation, but optimization passes do not handle the new instruction yet
so it may result in worse code than using ptrtoint. Follow-up changes will
update capture tracking, etc. for the new instruction.
RFC: https://discourse.llvm.org/t/clarifiying-the-semantics-of-ptrtoint/83987/54
Reviewed By: nikic
Pull Request: https://github.com/llvm/llvm-project/pull/139357
|
|
Finish making LLVM's implementation of `DW_LNCT_LLVM_source` conform to
the final accepted version of `DW_LNCT_source` from
https://dwarfstd.org/issues/180201.1.html
This is effectively a continuation of a few commits which have moved in
this direction already, including:
* c9cb4fc761cd7 [DebugInfo] Store optional DIFile::Source as pointer
* 87e22bdd2bd6d Allow for mixing source/no-source DIFiles in one CU
This patch:
* Teaches LLParser that there is a distinction between an empty and an
absent "source:" field on DIFile.
* Makes printing the "source:" field in AsmWriter conditional on it
being present, instead of being conditional on it being non-empty.
* Teaches MC to map an empty-but-present source field to "\n" (which is
ambiguous, making the source strings "" and "\n" indistinguishable, but
that's what the DWARF issue specifies).
Add a test for round-tripping an empty source field through
assembler/bitcode.
Extend the test for the actual DWARF generation so it covers all of the
cases (absent, present-but-empty,
present-and-ambiguously-single-newline, present).
|
|
Whole wave functions are functions that will run with a full EXEC mask.
They will not be invoked directly, but instead will be launched by way
of a new intrinsic, `llvm.amdgcn.call.whole.wave` (to be added in
a future patch). These functions are meant as an alternative to the
`llvm.amdgcn.init.whole.wave` or `llvm.amdgcn.strict.wwm` intrinsics.
Whole wave functions will set EXEC to -1 in the prologue and restore the
original value of EXEC in the epilogue. They must have a special first
argument, `i1 %active`, that is going to be mapped to EXEC. They may
have either the default calling convention or amdgpu_gfx. The inactive
lanes need to be preserved for all registers used, active lanes only for
the CSRs.
At the IR level, arguments to a whole wave function (other than
`%active`) contain poison in their inactive lanes. Likewise, the return
value for the inactive lanes is poison.
This patch contains the following work:
* 2 new pseudos, SI_SETUP_WHOLE_WAVE_FUNC and SI_WHOLE_WAVE_FUNC_RETURN
used for managing the EXEC mask. SI_SETUP_WHOLE_WAVE_FUNC will return
a SReg_1 representing `%active`, which needs to be passed into
SI_WHOLE_WAVE_FUNC_RETURN.
* SelectionDAG support for generating these 2 new pseudos and the
special handling of %active. Since the return may be in a different
basic block, it's difficult to add the virtual reg for %active to
SI_WHOLE_WAVE_FUNC_RETURN, so we initially generate an IMPLICIT_DEF
which is later replaced via a custom inserter.
* Expansion of the 2 pseudos during prolog/epilog insertion. PEI also
marks any used VGPRs as WWM registers, which are then spilled and
restored with the usual logic.
Future patches will include the `llvm.amdgcn.call.whole.wave` intrinsic
and a lot of optimization work (especially in order to reduce spills
around function calls).
---------
Co-authored-by: Matt Arsenault <Matthew.Arsenault@amd.com>
Co-authored-by: Shilei Tian <i@tianshilei.me>
|
|
RFC on discourse:
https://discourse.llvm.org/t/rfc-debug-info-for-coroutine-suspension-locations-take-2/86606
With this commit, we add `DILabel` debug infos to the resume points of a
coroutine. Those labels can be used by debugging scripts to figure out
the exact line and column at which a coroutine was suspended by looking
up current `__coro_index` value inside the coroutines frame, and then
searching for the corresponding label inside the coroutine's resume
function.
The DWARF information generated for such a label looks like:
```
0x00000f71: DW_TAG_label
DW_AT_name ("__coro_resume_1")
DW_AT_decl_file ("generator-example.cpp")
DW_AT_decl_line (5)
DW_AT_decl_column (3)
DW_AT_artificial (true)
DW_AT_LLVM_coro_suspend_idx (0x01)
DW_AT_low_pc (0x00000000000019be)
```
The labels can be mapped to their corresponding `__coro_idx` values
either via their naming convention `__coro_resume_<N>` or using the new
`DW_AT_LLVM_coro_suspend_idx` attribute. In gdb, those line numebrs can
be looked up using `info line -function my_coroutine -label
__coro_resume_1`. LLDB unfortunately does not understand DW_TAG_label
debug information, yet.
Given this is an artificial compiler-generated label, I did apply the
DW_AT_artificial tag to it. The DWARFv5 standard only allows that tag on
type and variable definitions, but this is a natural extension and was
also blessed in the RFC on discourse.
Also, this commit adds `DW_AT_decl_column` to labels, not only for
coroutines but also for normal C and C++ labels. While not strictly
necessary, I am doing so now because it would be harder to do so later
without breaking the binary LLVM-IR format
Drive-by fixes: While reading the existing test cases to understand how
to write my own test case, I did a couple of small typo fixes and
comment improvements
|
|
Linkage is already of GlobalValue::LinkageTypes.
|
|
Patch 1/4 adding bitcode support.
Store whether or not a function is using Key Instructions in its DISubprogram so
that we don't need to rely on the -mllvm flag -dwarf-use-key-instructions to
determine whether or not to interpret Key Instructions metadata to decide
is_stmt placement at DWARF emission time. This makes bitcode support simple and
enables well defined mixing of non-key-instructions and key-instructions
functions in an LTO context.
This patch adds the bit (using DISubprogram::SubclassData1).
PR 144104 and 144103 use it during DWARF emission.
PR 44102 adds bitcode
support.
See pull request for overview of alternative attempts.
|
|
|
|
In Ada, a record type can have a non-constant size, and a field can
appear at a non-constant bit offset in a record.
To support this, this patch changes DIType to record the size and offset
using metadata, rather than plain integers. In addition to a constant
offset, both DIVariable and DIExpression are now supported here.
One thing of note in this patch is the choice of how exactly to
represent a non-constant bit offset, with the difficulty being that
DWARF 5 does not support this. DWARF 3 did have a way to support a
non-constant byte offset, combined with a constant bit offset within the
byte, but this was deprecated in DWARF 4 and removed from DWARF 5.
This patch takes a simple approach: a DWARF extension allowing the use
of an expression with DW_AT_data_bit_offset. There is a corresponding
DWARF issue, see https://dwarfstd.org/issues/250501.1.html. The main
reason for this approach is that it keeps API simplicity: just a single
value is needed, rather than having separate data describing the byte
offset and the bit within the byte.
|
|
This flag was used to let us incrementally introduce debug records
into LLVM, however everything is now using records. It serves no
purpose now, so delete it.
|
|
By chance, two things have prevented the autoupgrade path being
exercised much so far:
* LLParser setting the debug-info mode to "old" on seeing intrinsics,
* The test in AutoUpgrade.cpp wanting to upgrade into a "new" debug-info
block.
In practice, this appears to mean this code path hasn't seen the various
invalid inputs that can come its way. This commit does a number of
things:
* Tolerates the various illegal inputs that can be written with
debug-intrinsics, and that must be tolerated until the Verifier runs,
* Printing illegal/null DbgRecord fields must succeed,
* Verifier errors need to localise the function/block where the error
is,
* Tests that now see debug records will print debug-record errors,
Plus a few new tests for other intrinsic-to-debug-record failures modes
I found. There are also two edge cases:
* Some of the unit tests switch back and forth between intrinsic and
record modes at will; I've deleted coverage and some assertions to
tolerate this as intrinsic support is now Gone (TM),
* In sroa-extract-bits.ll, the order of debug records flips. This is
because the autoupgrader upgrades in the opposite order to the basic
block conversion routines... which doesn't change the record order, but
_does_ change the use list order in Metadata! This should (TM) have no
consequence to the correctness of LLVM, but will change the order of
various records and the order of DWARF record output too.
I tried to reduce this patch to a smaller collection of changes, but
they're all intertwined, sorry.
|
|
Start removing debug intrinsics support -- starting with the flag that
controls production of their replacement, debug records. This patch
removes the command-line-flag and with it the ability to switch back to
intrinsics. The module / function / block level "IsNewDbgInfoFormat"
flags get hardcoded to true, I'll to incrementally remove things that
depend on those flags.
|
|
Bitstream libraries for DLL export (#141794)
## Purpose
This patch is one in a series of code-mods that annotate LLVM’s public
interface for export. This patch annotates the `llvm/AsmParser`,
`llvm/BinaryFormat`, `llvm/Bitcode` and `llvm/Bitstream libraries. These
annotations currently have no meaningful impact on the LLVM build;
however, they are a prerequisite to support an LLVM Windows DLL (shared
library) build.
## Background
This effort is tracked in #109483. Additional context is provided in
[this
discourse](https://discourse.llvm.org/t/psa-annotating-llvm-public-interface/85307),
and documentation for `LLVM_ABI` and related annotations is found in the
LLVM repo
[here](https://github.com/llvm/llvm-project/blob/main/llvm/docs/InterfaceExportAnnotations.rst).
The bulk of these changes were generated automatically using the
[Interface Definition Scanner (IDS)](https://github.com/compnerd/ids)
tool, followed formatting with `git clang-format`.
The following manual adjustments were also applied after running IDS on
Linux:
- Add `LLVM_ABI_FRIEND` to friend member functions declared with
`LLVM_ABI`
- Add `LLVM_ABI` symbols that require export but are not declared in
headers
## Validation
Local builds and tests to validate cross-platform compatibility. This
included llvm, clang, and lldb on the following configurations:
- Windows with MSVC
- Windows with Clang
- Linux with GCC
- Linux with Clang
- Darwin with Clang
|
|
|
|
Since we currently only use the context information in the alloc info
summary in the LTO backend for assertion checking, there is no need to
write this into the combined summary index for distributed ThinLTO for
NDEBUG builds. Put this under a new -combined-index-memprof-context
option which is off by default for NDEBUG.
The advantage is that we save time (not having to sort in preparation
for building the radix trees), and space in the generated bitcode files.
We could also do so for the callsite info records, but those are smaller
and less expensive to prepare.
|
|
Reapply "IR: Remove uselist for constantdata (#137313)"
This reverts commit 5936c02c8b9c6d1476f7830517781ce8b6e26e75.
Fix checking uselists of constants in assume bundle queries
|
|
Possibly breaks the build: https://lab.llvm.org/buildbot/#/builders/24/builds/8119
This reverts commit 87f312aad6ede636cd2de5d18f3058bf2caf5651.
|
|
This is a resurrected version of the patch attached to this RFC:
https://discourse.llvm.org/t/rfc-constantdata-should-not-have-use-lists/42606
In this adaptation, there are a few differences. In the original patch, the Use's
use list was replaced with an unsigned* to the reference count in the value. This
version leaves them as null and leaves the ref counting only in Value.
Remove use-lists from instances of ConstantData (which are shared
across modules and have no operands).
To continue supporting most of the use-list API, store a ref-count in
place of the use-list; this is for API like Value::use_empty and
Value::hasNUses. Operations that actually need the use-list -- like
Value::use_begin -- will assert.
This change has three benefits:
1. The compiler output cannot in any way depend on the use-list order
of instances of ConstantData.
2. There's no use-list traffic when adding and removing simple
constants from operand lists (although there is ref-count traffic;
YMMV).
3. It's cheaper to serialize use-lists (since we're no longer
serializing the use-list order of things like i32 0).
The downside is that you can't look at all the users of ConstantData,
but traversals of users of i32 0 are already ill-advised.
Possible follow-ups:
- Track if an instance of a ConstantVector/ConstantArray/etc. is known
to have all ConstantData arguments, and drop the use-lists to
ref-counts in those cases. Callers need to check Value::hasUseList
before iterating through the use-list.
- Remove even the ref-counts. I'm not sure they have any benefit
besides minimizing the scope of this commit, and maintaining the
counts is not free.
Fixes #58629
Co-authored-by: Duncan P. N. Exon Smith <dexonsmith@apple.com>
|
|
Add AtomGroup and AtomRank to DILocation behind compile time flag
EXPERIMENTAL_KEY_INSTRUCTIONS which is controlled by cmake flag
LLVM_EXPERIMENTAL_KEY_INSTRUCTIONS.
Add IR read-write roundtrip test in a directory that is unsupported unless the
CMake flag is enabled.
RFC: https://discourse.llvm.org/t/rfc-improving-is-stmt-placement-for-better-interactive-debugging/82668
|
|
instructions (#137701)
This patch adds support for LLVM IR atomicrmw `fmaximum` and `fminimum`
instructions.
These mirror the `llvm.maximum.*` and `llvm.minimum.*` instructions, but
are atomic and use IEEE754 2019 handling for NaNs, which is different to
`fmax` and `fmin`. See:
https://llvm.org/docs/LangRef.html#llvm-minimum-intrinsic
for more details.
Future changes will allow this LLVM IR to be lowered to specialised
assembler instructions on suitable targets, such as AArch64.
|
|
We currently accept label arguments to inline asm calls. This support
predates both blockaddresses and callbr and is only covered by one X86
test. Remove it in favor of callbr (or at least blockaddress, though
that cannot guarantee correct codegen, just like using block labels
directly can't).
I didn't bother implementing bitcode upgrade support for this, but I can
add it if desired.
|
|
instructions" (#137657)
Reverts llvm/llvm-project#136759 due to bad interaction with c792b25e4
|
|
(#136759)
This patch adds support for LLVM IR atomicrmw `fmaximum` and `fminimum`
instructions.
These mirror the `llvm.maximum.*` and `llvm.minimum.*` instructions, but
are atomic and use IEEE754 2019 handling for NaNs, which is different to
`fmax` and `fmin`. See:
https://llvm.org/docs/LangRef.html#llvm-minimum-intrinsic
for more details.
Future changes will allow this LLVM IR to be lowered to specialised
assembler instructions on suitable targets, such as AArch64.
|
|
See https://discourse.llvm.org/t/rfc-keep-globalvalue-guids-stable/84801
for context.
This is a non-functional change which just changes the interface of
GlobalValue, in preparation for future functional changes. This part
touches a fair few users, so is split out for ease of review. Future
changes to the GlobalValue implementation can then be focused purely on
that class.
This does the following:
* Rename GlobalValue::getGUID(StringRef) to
getGUIDAssumingExternalLinkage. This is simply making explicit at the
callsite what is currently implicit.
* Where possible, migrate users to directly calling getGUID on a
GlobalValue instance.
* Otherwise, where possible, have them call the newly renamed
getGUIDAssumingExternalLinkage, to make the assumption explicit.
There are a few cases where neither of the above are possible, as the
caller saves and reconstructs the necessary information to compute the
GUID themselves. We want to migrate these callers eventually, but for
this first step we leave them be.
|
|
The "preserve input debug-info format" flag allowed some tooling to opt
into not seeing the new debug records yet, and to not autoupgrade. This
was good at the time, but un-necessary now that we'll be ditching
intrinsics shortly.
It also hides errors now: verify-uselistorder was hardcoding this flag
to on, and as a result it hasn't seen debug records before. Thus, we
missed a uselistorder variation: constant-expressions such as GEPs can
be contained within debug records and completely isolated from the value
hierachy, see the metadata-use-uselistorder.ll test. These Values didn't
get ordered, but were legitimate uses of constants like "i64 0", and we
now run into difficulty handling that. The patch to AsmWriter seeks
Values to order even through debug-info now.
Finally there are a few intrinsics-tests relying on this flag that we
can just delete, such as one in llvm-reduce and another few in the
LocalTest unit tests. For the fast-isel test, it was added in
https://reviews.llvm.org/D67703 explicitly for checking the size of
blocks without debug-info and in 1525abb9c94 the codepath it tests moved
towards being sunsetted. It'll be totally redundant once RemoveDIs is on
permanently.
Note that there's now no explicit test for the textual-IR autoupgrade
path. I submit that we can rely on the thousands of .ll files where
we've only been bothered to update the outputs, not the inputs, to debug
records.
|
|
During the transition from debug intrinsics to debug records, we used
several different command line options to customise handling: the
printing of debug records to bitcode and textual could be independent of
how the debug-info was represented inside a module, whether the
autoupgrader ran could be customised. This was all valuable during
development, but now that totally removing debug intrinsics is coming
up, this patch removes those options in favour of a single flag
(experimental-debuginfo-iterators), which enables autoupgrade, in-memory
debug records, and debug record printing to bitcode and textual IR.
We need to do this ahead of removing the
experimental-debuginfo-iterators flag, to reduce the amount of
test-juggling that happens at that time.
There are quite a number of weird test behaviours related to this --
some of which I simply delete in this commit. Things like
print-non-instruction-debug-info.ll , the test suite now checks for
debug records in all tests, and we don't want to check we can print as
intrinsics. Or the update_test_checks tests -- these are duplicated with
write-experimental-debuginfo=false to ensure file writing for intrinsics
is correct, but that's something we're imminently going to delete.
A short survey of curious test changes:
* free-intrinsics.ll: we don't need to test that debug-info is a zero
cost intrinsic, because we won't be using intrinsics in the future.
* undef-dbg-val.ll: apparently we pinned this to non-RemoveDIs in-memory
mode while we sorted something out; it works now either way.
* salvage-cast-debug-info.ll: was testing intrinsics-in-memory get
salvaged, isn't necessary now
* localize-constexpr-debuginfo.ll: was producing "dead metadata"
intrinsics for optimised-out variable values, dbg-records takes the
(correct) representation of poison/undef as an operand. Looks like we
didn't update this in the past to avoid spurious test differences.
* Transforms/Scalarizer/dbginfo.ll: this test was explicitly testing
that debug-info affected codegen, and we deferred updating the tests
until now. This is just one of those silent gnochange issues that get
fixed by RemoveDIs.
Finally: I've added a bitcode test, dbg-intrinsics-autoupgrade.ll.bc,
that checks we can autoupgrade debug intrinsics that are in bitcode into
the new debug records.
|
|
This adds DWARF generation for fixed-point types. This feature is needed
by Ada.
Note that a pre-existing GNU extension is used in one case. This has
been emitted by GCC for years, and is needed because standard DWARF is
otherwise incapable of representing these types.
|
|
In Ada, an array can be packed and the elements can take less space than
their natural object size. For example, for this type:
type Packed_Array is array (4 .. 8) of Boolean;
pragma pack (Packed_Array);
... each element of the array occupies a single bit, even though the
"natural" size for a Boolean in memory is a byte.
In DWARF, this is represented by putting a DW_AT_bit_stride onto the
array type itself.
This patch adds a bit stride to DICompositeType so that gnat-llvm can
emit DWARF for these sorts of arrays.
|
|
|
|
Try to fix share libs build after #129868.
|
|
The module currently stores the target triple as a string. This means
that any code that wants to actually use the triple first has to
instantiate a Triple, which is somewhat expensive. The change in #121652
caused a moderate compile-time regression due to this. While it would be
easy enough to work around, I think that architecturally, it makes more
sense to store the parsed Triple in the module, so that it can always be
directly queried.
For this change, I've opted not to add any magic conversions between
std::string and Triple for backwards-compatibilty purses, and instead
write out needed Triple()s or str()s explicitly. This is because I think
a decent number of them should be changed to work on Triple as well, to
avoid unnecessary conversions back and forth.
The only interesting part in this patch is that the default triple is
Triple("") instead of Triple() to preserve existing behavior. The former
defaults to using the ELF object format instead of unknown object
format. We should fix that as well.
|
|
This patch adds a function attribute `riscv_vls_cc` for RISCV VLS
calling
convention which takes 0 or 1 argument, the argument is the `ABI_VLEN`
which is the `VLEN` for passing the fixed-vector arguments, it wraps the
argument as a scalable vector(VLA) using the `ABI_VLEN` and uses the
corresponding mechanism to handle it. The range of `ABI_VLEN` is [32,
65536],
if not specified, the default value is 128.
Here is an example of VLS argument passing:
Non-VLS call:
```
void original_call(__attribute__((vector_size(16))) int arg) {}
=>
define void @original_call(i128 noundef %arg) {
entry:
...
ret void
}
```
VLS call:
```
void __attribute__((riscv_vls_cc(256))) vls_call(__attribute__((vector_size(16))) int arg) {}
=>
define riscv_vls_cc void @vls_call(<vscale x 1 x i32> %arg) {
entry:
...
ret void
}
}
```
The first Non-VLS call passes generic vector argument of 16 bytes by
flattened integer.
On the contrary, the VLS call uses `ABI_VLEN=256` which wraps the
vector to <vscale x 1 x i32> where the number of scalable vector
elements
is calaulated by: `ORIG_ELTS * RVV_BITS_PER_BLOCK / ABI_VLEN`.
Note: ORIG_ELTS = Vector Size / Type Size = 128 / 32 = 4.
PsABI PR: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/418
C-API PR: https://github.com/riscv-non-isa/riscv-c-api-doc/pull/68
|
|
|
|
An Ada program can have types that are subranges of other types. This
patch adds a new DIType node, DISubrangeType, to represent this concept.
I considered extending the existing DISubrange to do this, but as
DISubrange does not derive from DIType, that approach seemed more
disruptive.
A DISubrangeType can be used both as an ordinary type, but also as the
type of an array index. This is also important for Ada.
Ada subrange types can also be stored using a bias. Representing this in
the DWARF required the use of an extension. GCC has been emitting this
extension for years, so I've reused it here.
|
|
Remove support for the mul constant expression, which has previously
already been marked as undesirable. This removes the APIs to create mul
expressions and updates tests to stop using mul expressions.
Part of:
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179
|
|
Model C/C++ `errno` macro by adding a corresponding `errno`
memory location kind to the IR. Preliminary work to separate
`errno` writes from other memory accesses, to the benefit of
alias analyses and optimization correctness.
Previous discussion: https://discourse.llvm.org/t/rfc-modelling-errno-memory-effects/82972.
|
|
(#124752)
When creating `EnumDecl`s from DWARF for Objective-C `NS_ENUM`s, the
Swift compiler tries to figure out if it should perform "swiftification"
of that enum (which involves renaming the enumerator cases, etc.). The
heuristics by which it determines whether we want to swiftify an enum is
by checking the `enum_extensibility` attribute (because that's what
`NS_ENUM` pretty much are). Currently LLDB fails to attach the
`EnumExtensibilityAttr` to `EnumDecl`s it creates (because there's not
enough info in DWARF to derive it), which means we have to fall back to
re-building Swift modules on-the-fly, slowing down expression evaluation
substantially. This happens around
https://github.com/swiftlang/swift/blob/4b3931c8ce437b3f13f245e6423f95c94a5876ac/lib/ClangImporter/ImportEnumInfo.cpp#L37-L59
To speed up Swift exression evaluation, this patch proposes encoding the
C/C++/Objective-C `enum_extensibility` attribute in DWARF via a new
`DW_AT_APPLE_ENUM_KIND`. This would currently be only used from the LLDB
Swift plugin. But may be of interest to other language plugins as well
(though I haven't come up with a concrete use-case for it outside of
Swift).
I'm open to naming suggestions of the various new attributes/attribute
constants proposed here. I tried to be as generic as possible if we
wanted to extend it to other kinds of enum properties (e.g., flag
enums).
The new attribute would look as follows:
```
DW_TAG_enumeration_type
DW_AT_type (0x0000003a "unsigned int")
DW_AT_APPLE_enum_kind (DW_APPLE_ENUM_KIND_Closed)
DW_AT_name ("ClosedEnum")
DW_AT_byte_size (0x04)
DW_AT_decl_file ("enum.c")
DW_AT_decl_line (23)
DW_TAG_enumeration_type
DW_AT_type (0x0000003a "unsigned int")
DW_AT_APPLE_enum_kind (DW_APPLE_ENUM_KIND_Open)
DW_AT_name ("OpenEnum")
DW_AT_byte_size (0x04)
DW_AT_decl_file ("enum.c")
DW_AT_decl_line (27)
```
Absence of the attribute means the extensibility of the enum is unknown
and abides by whatever the language rules of that CU dictate.
This does feel like a big hammer for quite a specific use-case, so I'm
happy to discuss alternatives.
Alternatives considered:
* Re-using an existing DWARF attribute to express extensibility. E.g., a
`DW_TAG_enumeration_type` could have a `DW_AT_count` or
`DW_AT_upper_bound` indicating the number of enumerators, which could
imply closed-ness. I felt like a dedicated attribute (which could be
generalized further) seemed more applicable. But I'm open to re-using
existing attributes.
* Encoding the entire attribute string (i.e., `DW_TAG_LLVM_annotation
("enum_extensibility((open))")`) on the `DW_TAG_enumeration_type`. Then
in LLDB somehow parse that out into a `EnumExtensibilityAttr`. I haven't
found a great API in Clang to parse arbitrary strings into AST nodes
(the ones I've found required fully formed C++ constructs). Though if
someone knows of a good way to do this, happy to consider that too.
|
|
When we apply cloning decisions in the ThinLTO backend, we need to find
the corresponding summary for each function in the IR, and in some cases
for callee functions. This is complicated when the function was a
promoted local, in which case the GUID was formed from the hash of the
original source file prepended to the function name. Those functions
can be identified by the fact that they were given a ".llvm." suffix
during promotion.
We previously didn't do this correctly for promoted locals imported from
other modules, as we only tried the current module source name. This led
to crashes, in particular when the current module also had an local
function of the same original name. In particular, we were attempting to
iterate through the wrong summary's callsites, and there were fewer than
in the actual function so we accessed data off the end (in a release
build with assertion checking off - with assertion checking on we double
check the stack ids and that would have failed). Even if we hadn't
crashed or hit an assert, we could have applied the wrong cloning
decisions, leading to unsats at link time.
Luckily, function importing attaches thinlto_src_file metadata
containing the original source file name to all imported functions. It
normally doesn't do this by default, however, it always does if MemProf
context disambiguation is enabled. Therefore, we can just look to see if
the function contains this metadata and if so use it to recreate the
original GUID.
A similar issue can occur when looking for the ValueInfo / GUID of
a direct tail call to see if we synthesized a callsite record for a
missing tail call frame. In that case, the callee function may be a
declaration, if we imported its caller but not the callee function
definition. Because imported declarations don't get the thinlto_src_file
metadata, we instead look at its caller (which works because this
happens very early in the backend before any inlining).
|
|
Add a new AutoUpgrade function to convert some legacy nvvm.annotations
metadata to function level attributes. These attributes are quicker to
look-up so improve compile time and are more idiomatic than using
metadata which should not include required information that changes the
meaning of the program.
Currently supported annotations are:
- !"kernel" -> ptx_kernel calling convention
- !"align" -> alignstack parameter attributes (return not yet supported)
|
|
This PR removes the old `nocapture` attribute, replacing it with the new
`captures` attribute introduced in #116990. This change is
intended to be essentially NFC, replacing existing uses of `nocapture`
with `captures(none)` without adding any new analysis capabilities.
Making use of non-`none` values is left for a followup.
Some notes:
* `nocapture` will be upgraded to `captures(none)` by the bitcode
reader.
* `nocapture` will also be upgraded by the textual IR reader. This is to
make it easier to use old IR files and somewhat reduce the test churn in
this PR.
* Helper APIs like `doesNotCapture()` will check for `captures(none)`.
* MLIR import will convert `captures(none)` into an `llvm.nocapture`
attribute. The representation in the LLVM IR dialect should be updated
separately.
|
|
Use the methods accepting LLVMContext instead.
|
|
|
|
This introduces the `captures` attribute as described in:
https://discourse.llvm.org/t/rfc-improvements-to-capture-tracking/81420
This initial patch only introduces the IR/bitcode support for the
attribute and its in-memory representation as `CaptureInfo`. This will
be followed by a patch to upgrade and remove the `nocapture` attribute,
and then by actual inference/analysis support.
Based on the RFC feedback, I've used a syntax similar to the `memory`
attribute, though the only "location" that can be specified is `ret`.
I've added some pretty extensive documentation to LangRef on the
semantics. One non-obvious bit here is that using ptrtoint will not
result in a "return-only" capture, even if the ptrtoint result is only
used in the return value. Without this requirement we wouldn't be able
to continue ordinary capture analysis on the return value.
|
|
|
|
Empty arrays can be converted to `poison` instead of `undef`.
|
|
This consists of:
* Make these instructions part of FPMathOperator.
* Adjust bitcode/ir readers/writers to expect fast math flags on these
instructions.
* Make IRBuilder set the fast math flags on these instructions.
* Update langref and release notes.
* Update a bunch of tests. Some of these are due to InstCombineCasts
incorrectly adding fast math flags to fptrunc, which will be fixed in a
later patch.
|
|
LLParser::parseConstantValue is missing support for parsing
zeroinitializer and poison constants. Fix this.
|
|
Add a specification attribute to LLVM DebugInfo, which is analogous
to DWARF's DW_AT_specification. According to the DWARF spec:
"A debugging information entry that represents a declaration that
completes another (earlier) non-defining declaration may have a
DW_AT_specification attribute whose value is a reference to the
debugging information entry representing the non-defining declaration."
This patch allows types to be specifications of other types. This is
used by Swift to represent generic types. For example, given this Swift
program:
```
struct MyStruct<T> {
let t: T
}
let variable = MyStruct<Int>(t: 43)
```
The Swift compiler emits (roughly) an unsubtituted type for MyStruct<T>:
```
DW_TAG_structure_type
DW_AT_name ("MyStruct")
// "$s1w8MyStructVyxGD" is a Swift mangled name roughly equivalent to
// MyStruct<T>
DW_AT_linkage_name ("$s1w8MyStructVyxGD")
// other attributes here
```
And a specification for MyStruct<Int>:
```
DW_TAG_structure_type
DW_AT_specification (<link to "MyStruct">)
// "$s1w8MyStructVySiGD" is a Swift mangled name equivalent to
// MyStruct<Int>
DW_AT_linkage_name ("$s1w8MyStructVySiGD")
DW_AT_byte_size (0x08)
// other attributes here
```
|
|
An extra inhabitant is a bit pattern that does not represent a valid
value for instances of a given type. The number of extra inhabitants is
the number of those bit configurations.
This is used by Swift to save space when composing types. For example,
because Bool only needs 2 bit patterns to represent all of its values
(true and false), an Optional<Bool> only occupies 1 byte in memory by
using a bit configuration that is unused by Bool. Which bit patterns are
unused are part of the ABI of the language.
Since Swift generics are not monomorphized, by using dynamic libraries
you can have generic types whose size, alignment, etc, are known only
at runtime (which is why this feature is needed).
This patch adds num_extra_inhabitants to LLVM-IR debug info and in DWARF
as an Apple extension.
|
|
Add support for C style comments in LLVM assembly.
---------
Co-authored-by: Nikita Popov <github@npopov.com>
|
