aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-06-12float128: Add strfromf128, strtof128, and wcstof128 to the manualGabriel F. T. Gomes3-7/+77
* manual/math.texi (Mathematics): Add description for _FloatN and _FloatNx types and mentions that they are not support in glibc for any architecture, so far. * manual/arith.texi (wcstof, wcstold): Replace the mention to stdlib.h with wchar.h. (Parsing of Floats): Add descriptions for strtofN and wcstofN. (Printing of Floats): Add description for strfromfN.
2017-06-12float128: Add strtof128, wcstof128, and related functions.Paul E. Murphy21-29/+466
The implementations are contained with sysdeps/ieee754/float128 as they are only built when _Float128 is enabled within libc/m. * include/gmp.h (__mpn_construct_float128): New declaration. * include/stdlib.h: Include bits/floatn.h for _Float128 tests. (__strtof128_l): New declaration. (__strtof128_nan): Likewise. (__wcstof128_nan): Likewise. (__strtof128_internal): Likewise. (____strtof128_l_internal): Likewise. * include/wchar.h: Include bits/floatn.h for _Float128 tests. (__wcstof128_l): New declaration. (__wcstof128_internal): Likewise. * stdlib/Makefile (bug-strtod2): Link libm too. * stdlib/stdlib.h (strtof128): New declaration. (strtof128_l): Likewise. * stdlib/tst-strtod-nan-locale-main.c: Updated to use tst-strtod.h macros to ensure float128 gets tested too. * stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro. * stdlib/tst-strtod.h: Include bits/floatn.h for _Float128 tests. (IF_FLOAT128): New macro. (GEN_TEST_STRTOD): Update to optionally include _Float128 in the tests. (STRTOD_TEST_FOREACH): Likewise. * sysdeps/ieee754/float128/Makefile: Insert new strtof128 and wcstof128 functions into libc. * sysdeps/ieee754/float128/Versions: Add exports for the above new functions. * sysdeps/ieee754/float128/mpn2float128.c: New file. * sysdeps/ieee754/float128/strtod_nan_float128.h: New file. * sysdeps/ieee754/float128/strtof128.c: New file. * sysdeps/ieee754/float128/strtof128_l.c: New file. * sysdeps/ieee754/float128/strtof128_nan.c: New file. * sysdeps/ieee754/float128/wcstof128.c: New file. * sysdeps/ieee754/float128/wcstof128_l.c: New file. * sysdeps/ieee754/float128/wcstof128_nan.c: New fike. * wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS. (CFLAGS-wcstof128_l): Likewise. * wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests. (wcstof128): New declaration. (wcstof128_l): Likewise.
2017-06-12Fix XPG4 bsd_signal namespace (bug 21552).Joseph Myers3-2/+6
bsd_signal was added in XPG4.2, so should be declared for __USE_XOPEN_EXTENDED, instead of the present __USE_XOPEN condition. This patch fixes the condition accordingly. Tested for x86_64. [BZ #21552] * signal/signal.h (bsd_signal): Declare if [__USE_XOPEN_EXTENDED], not [__USE_XOPEN]. * conform/Makefile (test-xfail-XPG4/signal.h/conform): Remove.
2017-06-12Fix sigwait namespace (bug 21550).Joseph Myers2-0/+7
sigwait was added to POSIX in 1995; it is not in older POSIX versions or XPG4 / XPG4.2. Thus it should be declared only if __USE_POSIX199506; signal.h wrongly declares it for __USE_POSIX. (sigwaitinfo is correctly conditioned on __USE_POSIX199309.) This patch fixes the condition on the declaration of sigwait. Tested for x86_64. Because of other namespace problems this does not allow any conform/ XFAILs to be removed. [BZ #21550] * signal/signal.h (sigwait): Only declare if [__USE_POSIX199506].
2017-06-12x86-64: Implement strcpy family IFUNC selectors in CH.J. Lu15-131/+278
Implement strcpy family IFUNC selectors in C. All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for strcpy family functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcpy-sse2 and stpcpy-sse2. * sysdeps/x86_64/multiarch/ifunc-unaligned-ssse3.h: New file. * sysdeps/x86_64/multiarch/stpcpy-sse2.S: Likewise. * sysdeps/x86_64/multiarch/stpcpy.c: Likewise. * sysdeps/x86_64/multiarch/stpncpy.c: Likewise. * sysdeps/x86_64/multiarch/strcpy-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.c: Likewise. * sysdeps/x86_64/multiarch/strncpy.c: Likewise. * sysdeps/x86_64/multiarch/stpcpy.S: Removed. * sysdeps/x86_64/multiarch/stpncpy.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.S: Likewise. * sysdeps/x86_64/multiarch/strncpy.S: Likewise. * sysdeps/x86_64/multiarch/stpncpy-c.c (weak_alias): New. (libc_hidden_def): Always defined as empty. * sysdeps/x86_64/multiarch/strncpy-c.c (libc_hidden_builtin_def): Always Defined as empty.
2017-06-122017-06-12 Wilco Dijkstra <wdijkstr@arm.com>Wilco Dijkstra6-134/+19
There is no longer a need for string2.h, so remove it and all mention of it. Move the redirect for __stpcpy to include/string.h since it is still required until all internal uses have been renamed. This fixes several linknamespace/localplt failures when building with -Os. [BZ #15105] [BZ #19463] * include/string.h: Add internal redirect for __stpcpy. * string/Makefile: Remove bits/string2.h. * string/string.h: Update comment. * string/string-inlines.c: Remove bits/string2.h include and comment. * string/bits/string2.h: Remove file.
2017-06-12Replace all internal uses of __bzero with memset. This removes the needWilco Dijkstra10-11/+23
to redirect it to a builtin and means memset is inlined whenever possible, including with -Os. * sunrpc/bindrsvprt.c (bindresvport): Change __bzero to memset. * sunrpc/clnt_gen.c (clnt_create): Likewise. * sunrpc/des_impl.c (_des_crypt): Likewise. * sunrpc/key_call.c (key_gendes): Likewise. * sunrpc/pmap_rmt.c (clnt_broadcast): Likewise. * sunrpc/svc_simple.c (universal): Likewise. * sunrpc/svc_tcp.c (svctcp_create): Likewise. * sunrpc/svc_udp.c (svcudp_bufcreate): Likewise. * sysdeps/arm/aeabi_memclr.c (__aeabi_memclr): Likewise.
2017-06-11Correct collation rules for Malayalam.Santhosh Thottingal2-4/+30
[BZ #19922] * locales/iso14651_t1_common: Add collation rules for U+07DA to U+07DF. [BZ #19919] * locales/iso14651_t1_common: Correct collation of U+0D36 and U+0D37.
2017-06-10Correct an outdated comment in stdlib/errno.h.Zack Weinberg2-1/+5
2017-06-09powerpc: add sysconf support for cache geometriesPaul Clarke4-0/+181
There is currently no "cross-platform" (x86 and POWER) support for determining the cacheline size. This patch adds support to sysconf() to correctly report cacheline sizes based on the information in the auxilliary vector. Thus, using sysconf() is a cross-platform (x86 and POWER) solution for determining cacheline sizes. Support is added (on powerpc) for: _SC_LEVEL1_ICACHE_SIZE _SC_LEVEL1_ICACHE_ASSOC _SC_LEVEL1_ICACHE_LINESIZE _SC_LEVEL1_DCACHE_SIZE _SC_LEVEL1_DCACHE_ASSOC _SC_LEVEL1_DCACHE_LINESIZE _SC_LEVEL2_CACHE_SIZE _SC_LEVEL2_CACHE_ASSOC _SC_LEVEL2_CACHE_LINESIZE _SC_LEVEL3_CACHE_SIZE _SC_LEVEL3_CACHE_ASSOC _SC_LEVEL3_CACHE_LINESIZE * sysdeps/unix/sysv/linux/powerpc/sysconf.c: New file. Add powerpc-specific overrides for L1, L2, L3 CACHE_SIZEs, CACHE_ASSOCs, and CACHE_LINESIZEs, retrieving from auxv. * sysdeps/unix/sysv/linux/powerpc/test-powerpc-linux-sysconf.c: New file. Invoke newly supported sysconf values for powerpc, and report results. If none are supported, report so. * sysdeps/unix/sysv/linux/powerpc/Makefile (tests): Add new test, tst-sysconf.
2017-06-09Add a way to bypass the PLT when calling getauxvalTulio Magno Quites Machado Filho3-0/+14
* include/sys/auxv.h (__getauxval): Add a prototype and its libc_hidden_proto. * misc/getauxval.c (__getauxval): Use libc_hidden_def.
2017-06-09Fix waitid namespace (bug 21561).Joseph Myers4-9/+23
In sys/wait.h, waitid and associated constants and types are UX-shaded in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so should be appropriately conditional in the headers. This patch fixes the conditionals accordingly. (WCONTINUED is actually still XSI-shaded in POSIX.1:2008, but W* is also reserved there without XSI-shading, so nothing special needs to be done about the conditionals on WCONTINUED to conform to POSIX.1:2008 namespace rules.) Tested for x86_64. [BZ #21561] * posix/sys/wait.h (idtype_t): Change [__USE_XOPEN] condition to [__USE_XOPEN_EXTENDED]. (id_t): Likewise. (include of <bits/types/siginfo_t.h): Likewise. (waitid): Likewise. * sysdeps/unix/sysv/linux/bits/waitflags.h (WSTOPPED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (WEXITED): Likewise. (WCONTINUED): Likewise. (WNOWAIT): Likewise. * conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove. (test-xfail-XPG4/sys/wait.h/conform): Likewise. (test-xfail-POSIX/sys/wait.h/conform): Likewise.
2017-06-09Update nios2, sparc32 localplt.data files for recent GCC change.Joseph Myers3-4/+13
A recent GCC change to expand floating-point classification built-in functions inline using integer rather than floating-point arithmetic in some cases resulted in localplt test failures for nios2 and sparc32 <https://sourceware.org/ml/libc-testresults/2017-q2/msg00320.html>. This patch updates the localplt.data files in question to mark the relevant symbols as optional / add a new optional symbol. (The GCC patch has been reverted because of other problems it caused, but one can assume it will be applied again, without changes that would affect the PLT entries generated, once those issues have been resolved.) Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/nios2/localplt.data (__gtdf2): Mark libc.so PLT entry optional. (__gtsf2): Likewise. (__unorddf2): Likewise. (__unordsf2): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/localplt.data (_Q_fgt): New optional libc.so PLT entry.
2017-06-09Fix sigpause namespace (bug 21554).Joseph Myers2-1/+5
The sigpause function is declared for __USE_XOPEN. As it's new in XPG4.2 it should be declared only for __USE_XOPEN_EXTENDED. This patch fixes the declaration accordingly. Tested for x86_64. [BZ #21554] * signal/signal.h (sigpause):: Declare if [__USE_XOPEN_EXTENDED], not [__USE_XOPEN].
2017-06-09Condition signal.h inclusion in sys/wait.h (bug 21560).Joseph Myers2-2/+17
sys/wait.h includes signal.h unconditionally. But the permission to do so is UX-shaded in XPG4.2, and XSI-shaded in POSIX before 2008, so this should not be unconditional. This patch fixes this conservatively: the include is kept, but conditioned on the standards that permit it (meaning it is still present by default, because non-XSI POSIX.1:2008 is enabled by default). <bits/types.h> is now included unconditionally to provide the required definition of __pid_t; it was previously included via <signal.h>. Some standards require pid_t to be defined here, and all allow it to be defined here; previously defined via <signal.h>, it's now defined directly in this header. Tested for x86_64. This does not fix any of the sys/wait.h conformtest failures, but substantially reduces the number of namespace failures for sys/wait.h for XPG4 and POSIX. [BZ #21560] * posix/sys/wait.h: Condition include of <signal.h> on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. Include <bits/types.h> unconditionally. [!__pid_t_defined] (pid_t): Define typedef.
2017-06-09Remove bare use of __attribute__ in include/errno.h.Zack Weinberg2-1/+6
This is just a style fix; we always prefer the shorthand macros over bare uses of __attribute__, even in private headers. * include/errno.h (__errno_location): Use __attribute_const__ instead of bare __attribute__.
2017-06-09Polish the treatment of dl-tunable-list.h in Makeconfig.Zack Weinberg2-9/+19
Like basically all before-compile headers, dl-tunable-list.h should be generated using a stamp file to minimize unnecessary rebuilding; it wasn't being added to common-generated, so it wouldn't get cleaned up; and it was in between the rules for libc-modules.h/.stmp and their own addition to common-generated. * Makeconfig (dl-tunable-list.h): Generate using a stamp file. (common-generated): Add libc-modules.h and libc-modules.stmp in a more appropriate location. Also add dl-tunable-list.h and dl-tunable-list.stmp.
2017-06-09x86-64: Correct comments in ifunc-impl-list.cH.J. Lu2-6/+10
* sysdeps/x86_64/multiarch/ifunc-impl-list.c: Correct comments.
2017-06-09x86-64: Optimize strrchr/wcsrchr with AVX2H.J. Lu9-0/+382
Optimize strrchr/wcsrchr with AVX2 to check 32 bytes with vector instructions. It is as fast as SSE2 version for small data sizes and up to 1X faster for large data sizes on Haswell. Select AVX2 version on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strrchr-sse2, strrchr-avx2, wcsrchr-sse2 and wcsrchr-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __strrchr_avx2, __strrchr_sse2, __wcsrchr_avx2 and __wcsrchr_sse2. * sysdeps/x86_64/multiarch/strrchr-avx2.S: New file. * sysdeps/x86_64/multiarch/strrchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strrchr.c: Likewise. * sysdeps/x86_64/multiarch/wcsrchr-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcsrchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wcsrchr.c: Likewise.
2017-06-09x86-64: Optimize memrchr with AVX2H.J. Lu6-0/+435
Optimize memrchr with AVX2 to search 32 bytes with a single vector compare instruction. It is as fast as SSE2 memrchr for small data sizes and up to 1X faster for large data sizes on Haswell. Select AVX2 memrchr on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memrchr-sse2 and memrchr-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __memrchr_avx2 and __memrchr_sse2. * sysdeps/x86_64/multiarch/memrchr-avx2.S: New file. * sysdeps/x86_64/multiarch/memrchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/memrchr.c: Likewise.
2017-06-09x86-64: Optimize strchr/strchrnul/wcschr with AVX2H.J. Lu13-58/+512
Optimize strchr/strchrnul/wcschr with AVX2 to search 32 bytes with vector instructions. It is as fast as SSE2 versions for size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strchr-sse2, strchrnul-sse2, strchr-avx2, strchrnul-avx2, wcschr-sse2 and wcschr-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __strchr_avx2, __strchrnul_avx2, __strchrnul_sse2, __wcschr_avx2 and __wcschr_sse2. * sysdeps/x86_64/multiarch/strchr-avx2.S: New file. * sysdeps/x86_64/multiarch/strchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strchr.c: Likewise. * sysdeps/x86_64/multiarch/strchrnul-avx2.S: Likewise. * sysdeps/x86_64/multiarch/strchrnul-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strchrnul.c: Likewise. * sysdeps/x86_64/multiarch/wcschr-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcschr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wcschr.c: Likewise. * sysdeps/x86_64/multiarch/strchr.S: Removed.
2017-06-09x86-64: Optimize strlen/strnlen/wcslen/wcsnlen with AVX2H.J. Lu14-1/+644
Optimize strlen/strnlen/wcslen/wcsnlen with AVX2 to check 32 bytes with a single vector compare instruction. It is as fast as SSE2 versions for size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strlen-sse2, strnlen-sse2, strlen-avx2, strnlen-avx2, wcslen-sse2, wcslen-avx2 and wcsnlen-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __strlen_avx2, __strlen_sse2, __strnlen_avx2, __strnlen_sse2, __wcslen_avx2, __wcslen_sse2 and __wcsnlen_avx2. * sysdeps/x86_64/multiarch/strlen-avx2.S: New file. * sysdeps/x86_64/multiarch/strlen-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strlen.c: Likewise. * sysdeps/x86_64/multiarch/strnlen-avx2.S: Likewise. * sysdeps/x86_64/multiarch/strnlen-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strnlen.c: Likewise. * sysdeps/x86_64/multiarch/wcslen-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcslen-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wcslen.c: Likewise. * sysdeps/x86_64/multiarch/wcsnlen-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcsnlen.c (OPTIMIZE (avx2)): New. (IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast.
2017-06-09x86-64: Optimize memchr/rawmemchr/wmemchr with SSE2/AVX2H.J. Lu14-25/+646
SSE2 memchr is extended to support wmemchr. AVX2 memchr/rawmemchr/wmemchr are added to search 32 bytes with a single vector compare instruction. AVX2 memchr/rawmemchr/wmemchr are as fast as SSE2 memchr/rawmemchr/wmemchr for small sizes and up to 1.5X faster for larger sizes on Haswell and Skylake. Select AVX2 memchr/rawmemchr/wmemchr on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. * sysdeps/x86_64/memchr.S (MEMCHR): New. Depending on if USE_AS_WMEMCHR is defined. (PCMPEQ): Likewise. (memchr): Renamed to ... (MEMCHR): This. Support wmemchr if USE_AS_WMEMCHR is defined. Replace pcmpeqb with PCMPEQ. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memchr-sse2, rawmemchr-sse2, memchr-avx2, rawmemchr-avx2, wmemchr-sse4_1, wmemchr-avx2 and wmemchr-c. * sysdeps/x86_64/multiarch/ifunc-avx2.h: New file. * sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/memchr.c: Likewise. * sysdeps/x86_64/multiarch/rawmemchr-avx2.S: Likewise. * sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/rawmemchr.c: Likewise. * sysdeps/x86_64/multiarch/wmemchr-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wmemchr-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wmemchr.c: Likewise. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test __memchr_avx2, __memchr_sse2, __rawmemchr_avx2, __rawmemchr_sse2, __wmemchr_avx2 and __wmemchr_sse2.
2017-06-09malloc: Remove tst-dynarray, tst-dynarray-fail from test-srcsFlorian Weimer2-1/+6
They are already covered through the tests variable.
2017-06-09support: Expose TEST_VERIFY_EXIT behavior to GCC optimizersFlorian Weimer3-7/+27
Previously, the implementation would conditionally exit based on the status argument, which GCC did not know about. This leads to false uninitialized variable warnings when data is accessed after a TEST_VERIFY_EXIT failure (from code which would never execute).
2017-06-09aarch64: Fix undefined behavior in _dl_procinfoSiddhesh Poyarekar2-3/+9
1 << 31 is undefined, so replace it with a cleaner check. Also remove magic numbers in comments. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: Remove mention of magic numbers in comments. (_dl_procinfo): Fix undefined behavior
2017-06-08conformtest: Correct sys/wait.h expectations for XPG4.Joseph Myers3-6/+40
This patch corrects the conformtest expectations for sys/wait.h for XPG4. This does not change the test results for this header at the makefile level since it fixes some spurious failures for this header while introducing other failures previously hidden by incorrect expectations. However, it shows up issues with stdlib.h for XPG4 defining W* names that are not permitted in this case (previously wrongly allowed; the W* reservation is UX-shaded in XPG4.2 / XSI-shaded in POSIX before 2008); that test is thus XFAILed. Tested for x86_64. * conform/data/sys/wait.h-data (WIFCONTINUED): Do not expect for [XPG4]. (WEXITED): Likewise. (WSTOPPED): Likewise. (WCONTINUED): Likewise. (WNOHANG): Likewise. (WNOWAIT): Likewise. (idtype_t): Likewise. (P_ALL): Likewise. (P_PID): Likewise. (P_PGID): Likewise. (id_t): Likewise. (siginfo_t): Likewise. (wait3): Likewise. (waitid): Likewise. (signal.h): Do not allow header for [XPG4]. (sys/resource.h): Likewise. (si_*): Do not allow for [XPG4]. (W*): Likewise. (P_*): Likewise. (BUS_): Likewise. (CLD_): Likewise. (FPE_): Likewise. (ILL_): Likewise. (POLL_): Likewise. (SEGV_): Likewise. (SI_): Likewise. (TRAP_): Likewise. * conform/Makefile (test-xfail-XPG4/stdlib.h/conform): New variable.
2017-06-08ld.so: Consolidate 2 strtouls into _dl_strtoul [BZ #21528]H.J. Lu7-155/+104
There are 2 minimal strtoul implementations in ld.so: 1. __strtoul_internal in elf/dl-minimal.c. 2. tunables_strtoul in elf/dl-tunables.c. This patch adds _dl_strtoul to replace them. Tested builds with and without --enable-tunables. [BZ #21528] * elf/dl-minimal.c (__strtoul_internal): Removed. (strtoul): Likewise. * elf/dl-misc.c (_dl_strtoul): New function. * elf/dl-tunables.c (tunables_strtoul): Removed. (tunable_initialize): Replace tunables_strtoul with _dl_strtoul. * elf/rtld.c (process_envvars): Likewise. * sysdeps/unix/sysv/linux/dl-librecon.h (_dl_osversion_init): Likewise. * sysdeps/generic/ldsodefs.h (_dl_strtoul): New prototype.
2017-06-08Remove __need macros from stdio.h and wchar.h.Zack Weinberg34-382/+357
wint_t is a little finicky because it might be defined by stddef.h, which belongs to the compiler. In addition to the _types_, a bunch of other declarations shared between wctype.h and wchar.h are factored out to their own header. * libio/bits/types/FILE.h, libio/bits/types/__FILE.h * wcsmbs/bits/types/mbstate_t.h, wcsmbs/bits/types/__mbstate_t.h * wcsmbs/bits/types/wint_t.h: New single-type definition files. * wctype/bits/wctype-wchar.h: New file holding declarations shared between wctype.h and wchar.h. * libio/Makefile, wcsmbs/Makefile, wctype/Makefile: Install them. * include/bits/types/FILE.h, include/bits/types/__FILE.h * include/bits/types/mbstate_t.h, include/bits/types/__mbstate_t.h * include/bits/types/wint_t.h, include/bits/wcsmbs-wchar.h: New wrappers. * include/stdio.h, include/wchar.h, include/wctype.h: No need to handle __need macros. * grp/grp.h, gshadow/gshadow.h, hurd/hurd.h, iconv/gconv.h * libio/stdio.h, mach/mach.h, misc/mntent.h, pwd/pwd.h * shadow/shadow.h, stdio-common/printf.h, wcsmbs/uchar.h * wcsmbs/wchar.h, wctype/wctype.h * sysdeps/generic/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h Use the new files instead of __need macros.
2017-06-08Add more tests for memchrH.J. Lu2-0/+23
This patch adds tests for len == 0 and tests for positions close to the beginning, which are equivalent to positions close to the end for memchr. * string/test-memrchr.c (test_main): Add tests for len == 0 and tests for positions close to the beginning, which are equivalent to positions close to the end for memchr.
2017-06-07x86-64: Rename wmemset.h to ifunc-wmemset.hH.J. Lu5-4/+14
No code changes. * sysdeps/x86_64/multiarch/wmemset.c: Include ifunc-wmemset.h instead of wmemset.h. * sysdeps/x86_64/multiarch/wmemset_chk.c: Likewise. * sysdeps/x86_64/multiarch/wmemset.h: Renamed to ... * sysdeps/x86_64/multiarch/ifunc-wmemset.h: This.
2017-06-07float128: Add strfromf128Gabriel F. T. Gomes13-8/+173
Add strfromf128 to stdlib when _Float128 support is enabled. * stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize spec->info.is_binary128 to zero. * stdio-common/printf.h (printf_info): Add new member is_binary128 to indicate that the number being converted to string is compatible with the IEC 60559 binary128 format. * stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with _Float128 numbers. * stdio-common/printf_fphex.c: Include ieee754_float128.h and ldbl-128/printf_fphex_macros.h (__printf_fphex): Add code to deal with _Float128 numbers. * stdio-common/printf_size.c (__printf_size): Likewise. * stdio-common/vfprintf.c (process_arg): Initialize member info.is_binary128 to zero. * stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro. * stdlib/stdlib.h: Include bits/floatn.h for _Float128 support. (strfromf128): New declaration. * stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128 to one. * sysdeps/ieee754/float128/Makefile: Add strfromf128. * sysdeps/ieee754/float128/Versions: Likewise. * sysdeps/ieee754/float128/strfromf128.c: New file.
2017-06-07Refactor PRINT_FPHEX_LONG_DOUBLE into a reusable macroGabriel F. T. Gomes3-85/+116
This patch refactors the macro PRINT_FPHEX_LONG_DOUBLE from the file sysdeps/ieee754/ldbl-128/printf_fphex.c into a function-like macro to enable its use for both long double and _Float128, when they are ABI-distinct. * sysdeps/ieee754/ldbl-128/printf_fphex.c: Include ldbl-128/printf_fphex_macros.h for the definition of PRINT_FPHEX. (PRINT_FPHEX_LONG_DOUBLE): Define based on PRINT_FPHEX. * sysdeps/ieee754/ldbl-128/printf_fphex_macros.h (PRINT_FPHEX): New function-like macro that can be used for long double, as well as for _Float128
2017-06-07Remove duplicated code from __printf_fp_l, __printf_fphex, and __printf_sizeGabriel F. T. Gomes4-199/+125
In __printf_fp_l, __printf_fphex, and __printf_size the blocks of code that are used to read a double or long double argument, check for special values and convert to multiprecision are similar. When adding float128 support to libc, more code would be duplicated to deal with the extra type. This patch moves the repetitive code to a macro which is now used by double and long double and will be used for float128 when support is added, thus avoiding more duplication. Tested for powerpc64le and s390x. * stdio-common/printf_fp.c (PRINTF_FP_FETCH): New macro. (__printf_fp_l): Use the new macro to avoid duplicating code. * stdio-common/printf_fphex.c (PRINTF_FPHEX_FETCH): New macro. (__printf_fphex): Use the new macro to avoid duplicating code. * stdio-common/printf_size.c (PRINTF_SIZE_FETCH): New macro. (__printf_size): Use the new macro to avoid duplicating code.
2017-06-07float128: Add conversion from float128 to mpnGabriel F. T. Gomes7-2/+52
Reuse the code for __mpn_extract_long_double to implement __mpn_extract_float128. * include/gmp.h: Include bits/floatn.h (__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1. * stdlib/gmp-impl.h: Also check if alloca is not defined before including stack-alloc.h. It could have been defined by other header which not necessarily defines HAVE_ALLOCA. * sysdeps/ieee754/float128/Makefile: New file. * sysdeps/ieee754/float128/float1282mpn.c: New file. * sysdeps/ieee754/float128/float128_private.h: Include gmp.h before redefining __mpn_extract_long_double to __mpn_extract_float128, then redefine __mpn_extract_long_double to __mpn_extract_float128. * sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with _Float128 to allow float128_private.h overrides.
2017-06-07float128: Extend the power of ten tablesPaul E. Murphy3-6/+26
Update the power of ten tables used by the common implementation when long double is not the most expressive real type. * stdlib/fpioconst.h: Include bits/floatn.h. (FPIOCONST_HAVE_EXTENDED_RANGE): New macro for testing how big the power of ten table should be. (FPIOCONST_POW10_ARRAY_SIZE): Use larger table if above is true. * stdlib/fpioconst.c (__tens): Use FPIOCONST_HAVE_EXTENDED_RANGE to include larger tables when _Float128 support is enabled. (_fpioconst_pow10): Likewise.
2017-06-07Fix include paths in include/bits/types/*.h.Joseph Myers12-11/+24
Various include/bits/types/*.h files do where the path specified is relative to the toplevel glibc source directory. That has the wrong number of ../ components to achieve the desired effect; it actually searches relative to include/ for a file that does not exist there, then goes on to search the #include <> paths specified with -I, eventually finding the desired file via such a path (e.g. sysdeps/nptl/) with the right number of directory components. Before that it searches include/../.. because of the -Iinclude, meaning that an appropriately named file outside the glibc source tree can affect the build. This patch changes all those files to do #include <path> without the ../../, as some such files already do. Tested for x86_64. * include/bits/types/clock_t.h: Use #include <path> instead of #include "../../path". * include/bits/types/clockid_t.h: Likewise. * include/bits/types/struct_iovec.h: Likewise. * include/bits/types/struct_itimerspec.h: Likewise. * include/bits/types/struct_osockaddr.h: Likewise. * include/bits/types/struct_sigstack.h: Likewise. * include/bits/types/struct_timespec.h: Likewise. * include/bits/types/struct_timeval.h: Likewise. * include/bits/types/struct_tm.h: Likewise. * include/bits/types/time_t.h: Likewise. * include/bits/types/timer_t.h: Likewise.
2017-06-07Fix tst-timezone race (bug 14096).Joseph Myers2-0/+7
I observed a failure of timezone/tst-timezone with the same symptoms as reported in bug 14096. I was unable to reproduce the failure on testing again. However, from inspection, the cause is as follows. tst-timezone uses time zones compiled from the northamerica file, but has no dependency on any such zones, so with a parallel build it is possible that they do not get compiled until after tst-timezone is run. This patch adds a dependency on the compiled America/New_York zone (the one used as a makefile target to cause such zones to be compiled, rather than one which is actually used in that test) to fix the race. Tested for x86_64. [BZ #14096] * timezone/Makefile ($(objpfx)tst-timezone.out): Depend on America/New_York.
2017-06-07x86-64: Fold ifunc-sse4_1.h into wcsnlen.cH.J. Lu3-35/+22
Since ifunc-sse4_1.h is included only by wcsnlen.c, we can fold it into wcsnlen.c. No code changes in wcsnlen.o. 2017-06-07 H.J. Lu <hongjiu.lu@intel.com> * sysdeps/x86_64/multiarch/ifunc-sse4_1.h: Removed and folded into ... * sysdeps/x86_64/multiarch/wcsnlen.c: Here. Don't include ifunc-sse4_1.h.
2017-06-07Remove check for NULL buffer passed to `ptsname_r'Arjun Shankar3-7/+6
`ptsname_r' is declared in stdlib.h to only accept a `nonnull' second argument and therefore GCC may choose to make optimizations based on the assumption that this argument is NULL. This means that potentially, GCC can optimize away the NULL check at some point in the future. Since this is a programming interface, we might as well remove the NULL check ourselves. This also warrants a change to the `ptsname_r' manual page that must be submitted to the corresponding mailing list. In addition, remove the NULL buffer test in login/tst-ptsname.c.
2017-06-07Use test-driver in sysdeps/unix/sysv/linux/tst-clone2.cArjun Shankar2-4/+9
2017-06-07aarch64: Add hwcap string routinesSiddhesh Poyarekar3-8/+71
Add support for routines in dl-procinfo.h to show string versions of HWCAP entries when a program is invoked with the LD_SHOW_AUXV environment variable set and also to aid in path resolution for ldconfig. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_dl_aarch64_cap_flags): New array. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h (_dl_hwcap_string, _dl_string_hwcap, _dl_procinfo): Implement functions.
2017-06-07Make LD_HWCAP_MASK usable for static binariesSiddhesh Poyarekar4-14/+17
The LD_HWCAP_MASK environment variable was ignored in static binaries, which is inconsistent with the behaviour of dynamically linked binaries. This seems to have been because of the inability of ld_hwcap_mask being read early enough to influence anything but now that it is in tunables, the mask is usable in static binaries as well. This feature is important for aarch64, which relies on HWCAP_CPUID being masked out to disable multiarch. A sanity test on x86_64 shows that there are no failures. Likewise for aarch64. * elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask. * sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]: Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Always set up hwcap and hwcap_mask.
2017-06-07aarch64: Allow overriding HWCAP_CPUID feature check using HWCAP_MASKSiddhesh Poyarekar3-4/+54
Now that LD_HWCAP_MASK (or glibc.tune.hwcap_mask) is read early enough to influence cpu feature check in aarch64, use it to influence multiarch selection. Setting LD_HWCAP_MASK such that it clears HWCAP_CPUID will now disable multiarch for the binary. HWCAP_CPUID is also now set in HWCAP_IMPORTANT so that it is set by default. With this patch, this feature is only usable with dyanmically linked binaries because LD_HWCAP_MASK is not read for static binaries. A future patch fixes that. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Use glibc.tune.hwcap_mask. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: New file.
2017-06-07tunables: Use glibc.tune.hwcap_mask tunable instead of _dl_hwcap_maskSiddhesh Poyarekar9-4/+77
Drop _dl_hwcap_mask when building with tunables. This completes the transition of hwcap_mask reading from _dl_hwcap_mask to tunables. * elf/dl-hwcaps.h: New file. * elf/dl-hwcaps.c: Include it. (_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update glibc.tune.hwcap_mask. * elf/dl-cache.c: Include dl-hwcaps.h. (_dl_load_cache_lookup)[HAVE_TUNABLES]: Read glibc.tune.hwcap_mask. * sysdeps/sparc/sparc32/dl-machine.h: Likewise. * elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. * elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. (process_envvars)[HAVE_TUNABLES]: Likewise. * sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]: Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Don't initialize dl_hwcap_mask when tunables are enabled.
2017-06-07Add include guards to dl-procinfo.hSiddhesh Poyarekar3-0/+10
The dl-procinfo.h for linux/s390 and linux/i386 don't have include guards, which causes them to fail since addition of LD_HWCAP_MASK to tunables. Add _DL_I386_PROCINFO_H guard to avoid redefining _dl_procinfo on multiple includes and also allow the subsequent include of another dl-procinfo.h to work. Verified with a build test on i686. * sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Add include guard. * sysdeps/unix/sysv/linux/s390/dl-procinfo.h: Likewise.
2017-06-07tunables: Add LD_HWCAP_MASK to tunablesSiddhesh Poyarekar4-0/+35
Add LD_HWCAP_MASK to tunables in preparation of it being removed from rtld.c. This allows us to read LD_HWCAP_MASK much earlier so that it can influence IFUNC resolution in aarch64. This patch does not actually do anything other than read the LD_HWCAP_MASK variable and add the tunables way to set the LD_HWCAP_MASK, i.e. via the glibc.tune.hwcap_mask tunable. In a follow-up patch, the _dl_hwcap_mask will be replaced with glibc.tune.hwcap_mask to complete the transition. * elf/dl-tunables.list: Add glibc.tune.hwcap_mask. * scripts/gen-tunables.awk: Include dl-procinfo.h. * manual/tunables.texi: Document glibc.tune.hwcap_mask.
2017-06-07tunables: Clean up hooks to get and set tunablesSiddhesh Poyarekar6-70/+168
The TUNABLE_SET_VALUE and family of macros (and my later attempt to add a TUNABLE_GET) never quite went together very well because the overall interface was not clearly defined. This patch is an attempt to do just that. This patch consolidates the API to two simple sets of macros, TUNABLE_GET* and TUNABLE_SET*. If TUNABLE_NAMESPACE is defined, TUNABLE_GET takes just the tunable name, type and a (optionally NULL) callback function to get the value of the tunable. The callback function, if non-NULL, is called if the tunable was externally set (i.e. via GLIBC_TUNABLES or any future mechanism). For example: val = TUNABLE_GET (check, int32_t, check_callback) returns the value of the glibc.malloc.check tunable (assuming TUNABLE_NAMESPACE is set to malloc) as an int32_t into VAL after calling check_callback. Likewise, TUNABLE_SET can be used to set the value of the tunable, although this is currently possible only in the dynamic linker before it relocates itself. For example: TUNABLE_SET (check, int32_t, 2) will set glibc.malloc.check to 2. Of course, this is not possible since we set (or read) glibc.malloc.check long after it is relocated. To access or set a tunable outside of TUNABLE_NAMESPACE, use the TUNABLE_GET_FULL and TUNABLE_SET_FULL macros, which have the following prototype: TUNABLE_GET_FULL (glibc, tune, hwcap_mask, uint64_t, NULL) TUNABLE_SET_FULL (glibc, tune, hwcap_mask, uint64_t, 0xffff) In future the tunable list may get split into mutable and immutable tunables where mutable tunables can be modified by the library and userspace after relocation as well and TUNABLE_SET will be more useful than it currently is. However whenever we actually do that split, we will have to ensure that the mutable tunables are protected with locks. * elf/Versions (__tunable_set_val): Rename to __tunable_get_val. * elf/dl-tunables.c: Likewise. (do_tunable_update_val): New function. (__tunable_set_val): New function. (__tunable_get_val): Call CB only if the tunable was externally initialized. (tunables_strtoul): Replace strval with initialized. * elf/dl-tunables.h (strval): Replace with a bool initialized. (TUNABLE_ENUM_NAME, TUNABLE_ENUM_NAME1): Adjust names to prevent collision. (__tunable_set_val): New function. (TUNABLE_GET, TUNABLE_GET_FULL): New macros. (TUNABLE_SET, TUNABLE_SET_FULL): Likewise. (TUNABLE_SET_VAL): Remove. (TUNABLE_SET_VAL_WITH_CALLBACK): Likewise. * README.tunables: Document the new macros. * malloc/arena.c (ptmalloc_init): Adjust.
2017-06-06x86-64: Move wcsnlen.S to multiarch/wcsnlen-sse4_1.SH.J. Lu8-8/+101
Since wcsnlen.S uses pminud which is the part of SSE4.1, move wcsnlen.S to multiarch/wcsnlen-sse4_1.S. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add wcsnlen-sse4_1 and wcsnlen-c. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test __wcsnlen_sse4_1 and __wcsnlen_sse2. * sysdeps/x86_64/multiarch/ifunc-sse4_1.h: New file. * sysdeps/x86_64/multiarch/wcsnlen-c.c: Likewise. * sysdeps/x86_64/multiarch/wcsnlen-sse4_1.S: Likewise. * sysdeps/x86_64/multiarch/wcsnlen.c: Likewise. * sysdeps/x86_64/wcsnlen.S: Removed.
2017-06-06S390: Use generic spinlock code.Stefan Liebler5-115/+7
This patch removes the s390 specific implementation of spinlock code and is now using the generic one. ChangeLog: * sysdeps/s390/nptl/pthread_spin_init.c: Delete File. * sysdeps/s390/nptl/pthread_spin_lock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
generated by cgit v1.1 at 2024-11-24 16:35:39 +0000