aboutsummaryrefslogtreecommitdiff
path: root/gas/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2019-08-22Implement a float16 directive for assembling 16 bit IEEE 754 floating point ↵Barnaby Wilks1-4/+9
numbers for the AArch64 assembler. The syntax of the directive is: .float16 <0-n decimal numbers> e.g. .float16 0.5 .float16 10.2, NaN, 452.09 The floats will always be encoded using the binary16 format as described in the IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision format since AArch64 only supports the IEEE format. gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to acceptable float characters. * doc/c-aarch64.texi: Documentation for float16 directive. * testsuite/gas/aarch64/float16-be.d: New test. * testsuite/gas/aarch64/float16-le.d: New test. * testsuite/gas/aarch64/float16.s: New test. * NEWS: Add NEWS entry.
2019-08-20Adds support for following CPUs to the ARM and Aarch64 assemblers: ↵Dennis Zhang1-0/+6
Cortex-A77, Cortex-A76AE, Cortex-A34, Cortex-A65, and Cortex-A65AE. Related specifications can be found at https://developer.arm.com/ip-products/processors. gas * NEWS: Mention the Arm and AArch64 new processors. * config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65, Cortex-A77, cortex-A65AE, and Cortex-A76AE. * doc/c-aarch64.texi: Document new CPUs. * testsuite/gas/aarch64/cpu-cortex-a34.d: New test. * testsuite/gas/aarch64/cpu-cortex-a65.d: New test. * testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test. * testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test. * testsuite/gas/aarch64/cpu-cortex-a77.d: New test. * testsuite/gas/aarch64/nop-asm.s: New test. bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65, Cortex-A77, cortex-A65AE, and Cortex-A76AE.
2019-05-16[PATCH, binutils, Arm] Add Armv8.1-M Mainline and MVE enablement to NEWSAndre Vieira1-0/+3
gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * NEWS: Mention Armv8.1-M Mainline and MVE. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * NEWS: Mention Armv8.1-M Mainline and MVE.
2019-02-19Fix a potential deadlock in some older Loongson 3A1000 MIPS processors.Paul Hua1-0/+5
* NEWS: Mention -m[no-]fix-loongson3-llsc. * configure.ac: Add --enable-mips-fix-loongson3-llsc. Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC. * config.in: Regenerated. * configure: Likewise. * config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc): New variables. (options): New OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_longopts): Add -m[no-]fix-loongson3-llsc. (md_begin): Initialize sync insn. (fix_loongson3_llsc): New. (append_insn): Call fix_loongson3_llsc. (md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_show_usage): Display -m[no-]fix-loongson3-llsc. * doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc, --enable-mips-fix-loongson3-llsc=[yes|no].
2019-01-19Add markers for 2.32 branch to NEWS and ChangeLog files.Nick Clifton1-0/+2
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-09-17x86: Add -mvexwig=[0|1] option to assemblerH.J. Lu1-0/+3
Add -mvexwig=[0|1] option to x86 assembler to control how the assembler should encode the VEX.W bit in WIG VEX instructions. * gas/NEWS: Mention -mvexwig=[0|1] option. * config/tc-i386.c (vexwig): New. (build_vex_prefix): Set the VEX.W bit for -mvexwig=1 for WIG VEX instructions. (OPTION_MVEXWIG): New. (md_longopts): Add -mvexwig=. (md_parse_option): Handle OPTION_MVEXWIG. (md_show_usage): Show -mvexwig=[0|1]. * doc/c-i386.texi: Document -mvexwig=[0|1]. * testsuite/gas/i386/avx-wig.d: New file. * testsuite/gas/i386/avx-wig.s: Likewise. * testsuite/gas/i386/avx2-wig.d: Likewise. * testsuite/gas/i386/avx2-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.s: Likewise. * testsuite/gas/i386/i386.exp: Run avx-wig, avx2-wig, x86-64-avx-wig and x86-64-avx2-wig.
2018-08-31x86: Extend assembler to generate GNU property notesH.J. Lu1-0/+5
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED properties. If the assembly input contains no instructions, set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED property. Add a --enable-x86-used-note configure time option to set the default behavior. Set the default if the configure option is not used to "no". * NEWS: Mention -mx86-used-note=[no|yes]. * configure.ac: Add --enable-x86-used-note. Define DEFAULT_X86_USED_NOTE. * config.in: Regenerated. * configure: Likewise. * config/tc-i386.c (x86_isa_1_used): New. (x86_feature_2_used): Likewise. (x86_used_note): Likewise. (_i386_insn): Add has_regmmx, has_regxmm, has_regymm and has_regzmm. (build_modrm_byte): Set i.has_regmmx, i.has_regzmm. i.has_regymm and i.has_regxmm. (x86_cleanup): New function. (output_insn): Update x86_isa_1_used and x86_feature_2_used. (OPTION_X86_USED_NOTE): New. (md_longopts): Add -mx86-used-note=. (md_parse_option): Handle OPTION_X86_USED_NOTE. (md_show_usage): Display -mx86-used-note=. * config/tc-i386.h (x86_cleanup): New prototype. (md_cleanup): New. * doc/c-i386.texi: Document -mx86-used-note=.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu1-0/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu1-0/+2
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu1-0/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+2
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-20MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3aChenghua Xu1-0/+3
The MMI instruction set has been implemented in many Loongson processors. There is a lot of software optimized for MMI. This patch splits MMI from loongson2f/3a, and adds GAS and disassembler options for MMI instructions. 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@mips.com> bfd/ * elfxx-mips.c (print_mips_ases): Add MMI extension. binutils/ * readelf.c (print_mips_ases): Add MMI extension. gas/ * NEWS: Mention MultiMedia extensions Instructions (MMI) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and OPTION_NO_LOONGSON_MMI. (md_longopts): Likewise. (mips_ases): Define availability for MMI. (mips_convert_ase_flags): Map ASE_LOONGSON_MMI to AFL_ASE_LOONGSON_MMI. (mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a. (md_show_usage): Add help for -mloongson-mmi and -mno-loongson-mmi. * doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi. * doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi, .set loongson-mmi and .set noloongson-mmi. * testsuite/gas/mips/loongson-2f.d: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-2f.s: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.s: Here. * testsuite/gas/mips/loongson-3a.d: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a.s: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.s: Here. * testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and loongson-3a-mmi tests. include/ * elf/mips.h (AFL_ASE_MMI): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI. * opcode/mips.h (ASE_LOONGSON_MMI): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add MMI to loongson2f and loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-mmi option. (print_mips_disassembler_options): Document -M loongson-mmi. * mips-opc.c (LMMI): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI instructions.
2018-07-02Fix use of "command line X" in binutils docThomas Preud'homme1-21/+21
Binutils documentation uses a mix of spelling for the compound word "command-line X". According to [1]: "Sometimes compound words are written separately (nail polish), sometimes with a hyphen (short-sighted) and sometimes as one word (eyelashes). Often new compounds are written as two separate words and, as they become more familiar, they are either connected with a hyphen (-) or made into one word." I think command-line X is common enough in our industry that the two workds command and line should be connected. Since command-line is more common than commandline, I propose to update binutils documentation to consistently use "command-line" when this is used as an adjective to a noun (eg. command-line argument, command-line switch, command-line option and command-line flag). I've left occurences of "the command line" as is. I've also left gdb, sim and readline alone and have only touched public documentation (texi and NEWS files). [1] http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * doc/bfdint.texi: Use command-line consistently when used in a compount word. * doc/bfdsumm.texi: Likewise. binutils/ * NEWS: Use command-line consistently when used in a compount word. * doc/binutils.texi: Likewise and fix trailing whitespace on same line. gas/ * NEWS: Use command-line consistently when used in a compount word. * doc/as.texi: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cris.texi: Likewise. * doc/c-epiphany.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-lm32.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-nios2.texi: Likewise. * doc/c-ppc.texi: Likewise. * doc/c-pru.texi: Likewise. * doc/c-rl78.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/c-visium.texi: Likewise. * doc/c-xstormy16.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/c-z8k.texi: Likewise. * doc/internals.texi: Likewise. gprof/ * gprof.texi: Use command-line consistently when used in a compount word. ld/ * NEWS: Use command-line consistently when used in a compount word. * ld.texinfo: Likewise. * ldint.texinfo: Likewise.
2018-06-24Add 2.30 branch notes to ChangeLogs and NEWS files.Nick Clifton1-0/+2
2018-06-20Change the ARM assembler's ADR and ADRl pseudo-ops so that they will only ↵Nick Clifton1-0/+4
set the bottom bit of imported thumb function symbols if the -mthumb-interwork option is active. For more information see the email thread starting here: https://www.sourceware.org/ml/binutils/2018-05/msg00348.html PR 21458 * tc-arm.c (do_adr): Only set the bottom bit of an imported thumb function symbol address if -mthumb-interwork is active. (do_adrl): Likewise. * doc/c-arm.texi: Update descriptions of the -mthumb-interwork option and the ADR and ADRL pseudo-ops. * NEWS: Mention the new behaviour of the ADR and ADRL pseudo-ops. * testsuite/gas/arm/pr21458.d: Add -mthumb-interwork option to assembler command line. * testsuite/gas/arm/adr.d: Likewise. * testsuite/gas/arm/adrl.d: Likewise.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker1-0/+2
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton1-0/+2
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+2
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-0/+6
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-03-08x86: Remove support for old (<= 2.8.1) versions of gccH.J. Lu1-0/+2
Old (<= 2.8.1) versions of gcc generate broken fsubp, fsubrp, fdivp and fdivrp instructions. Assembler translates them to correct ones with a warning: [hjl@gnu-cfl-1 gas]$ cat x.s fsubp %st(3),%st [hjl@gnu-cfl-1 gas]$ gcc -c x.s x.s: Assembler messages: x.s:1: Warning: translating to `fsubp %st,%st(3)' [hjl@gnu-cfl-1 gas]$ This patch removes support for old (<= 2.8.1) versions of gcc: [hjl@gnu-cfl-1 gas]$ ./as-new -o x.o x.s x.s: Assembler messages: x.s:1: Error: operand type mismatch for `fsubp' [hjl@gnu-cfl-1 gas]$ gas/ * NEWS: Mention -mold-gcc removal. * config/tc-i386.c (i386_error): Remove old_gcc_only. (old_gcc): Removed. (match_template): Remove old gcc support. (OPTION_MOLD_GCC): Removed. (OPTION_MRELAX_RELOCATIONS): Updated. (md_longopts): Remove OPTION_MOLD_GCC. (md_parse_option): Likewise. (md_show_usage): Remove -mold-gcc. * testsuite/gas/i386/general.s: Convert fsub/fdiv tests for old (<= 2.8.1) versions of gcc. * testsuite/gas/i386/intel.s: Likewise. * testsuite/gas/i386/general.l: Updated. * testsuite/gas/i386/intel-intel.d: Likewise. * testsuite/gas/i386/intel.d: Likewise. * testsuite/gas/i386/intel.e: Likewise. * testsuite/gas/i386/i386.exp: Don't pass -mold-gcc to general. include/ * opcode/i386 (OLDGCC_COMPAT): Removed. opcodes/ * i386-gen.c (opcode_modifiers): Remove OldGcc. * i386-opc.h (OldGcc): Removed. (i386_opcode_modifier): Remove oldgcc. * i386-opc.tbl: Remove fsubp, fsubrp, fdivp and fdivrp instructions for old (<= 2.8.1) versions of gcc. * i386-tbl.h: Regenerated.
2018-02-27gas: Rename .nop directive to .nopsH.J. Lu1-1/+1
Since directives of NO_PSEUDO_DOT targets don't have the leading '.' and "nop" can be a valid instruction, rename .nop directive to .nops to avoid conflict. * NEWS: Rename .nop to .nops. * doc/as.texinfo: Likewise. * read.c (potable): Add "nops". Remove "nop". (s_nop): Renamed to ... (s_nops): This. * read.h (s_nop): Renamed to ... (s_nops): This. * write.c (cvt_frag_to_fill): Rename .nop to .nops. (md_generate_nops): Likewise. (relax_segment): Likewise. * testsuite/gas/i386/nop-1.d: Updated. * testsuite/gas/i386/nop-1.s: Likewise. * testsuite/gas/i386/nop-2.d: Likewise. * testsuite/gas/i386/nop-2.s: Likewise. * testsuite/gas/i386/nop-3.d: Likewise. * testsuite/gas/i386/nop-3.s: Likewise. * testsuite/gas/i386/nop-4.d: Likewise. * testsuite/gas/i386/nop-4.s: Likewise. * testsuite/gas/i386/nop-5.d: Likewise. * testsuite/gas/i386/nop-5.s: Likewise. * testsuite/gas/i386/nop-6.d: Likewise. * testsuite/gas/i386/nop-6.s: Likewise. * testsuite/gas/i386/nop-bad-1.l: Likewise. * testsuite/gas/i386/nop-bad-1.s: Likewise. * testsuite/gas/i386/x86-64-nop-1.d: Likewise. * testsuite/gas/i386/x86-64-nop-2.d: Likewise. * testsuite/gas/i386/x86-64-nop-3.d: Likewise. * testsuite/gas/i386/x86-64-nop-4.d: Likewise. * testsuite/gas/i386/x86-64-nop-5.d: Likewise. * testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-02-27x86: Add -O[2|s] assembler command-line optionsH.J. Lu1-0/+3
On x86, some instructions have alternate shorter encodings: 1. When the upper 32 bits of destination registers of andq $imm31, %r64 testq $imm31, %r64 xorq %r64, %r64 subq %r64, %r64 known to be zero, we can encode them without the REX_W bit: andl $imm31, %r32 testl $imm31, %r32 xorl %r32, %r32 subl %r32, %r32 This optimization is enabled with -O, -O2 and -Os. 2. Since 0xb0 mov with 32-bit destination registers zero-extends 32-bit immediate to 64-bit destination register, we can use it to encode 64-bit mov with 32-bit immediates. This optimization is enabled with -O, -O2 and -Os. 3. Since the upper bits of destination registers of VEX128 and EVEX128 instructions are extended to zero, if all bits of destination registers of AVX256 or AVX512 instructions are zero, we can use VEX128 or EVEX128 encoding to encode AVX256 or AVX512 instructions. When 2 source registers are identical, AVX256 and AVX512 andn and xor instructions: VOP %reg, %reg, %dest_reg can be encoded with VOP128 %reg, %reg, %dest_reg This optimization is enabled with -O2 and -Os. 4. 16-bit, 32-bit and 64-bit register tests with immediate may be encoded as 8-bit register test with immediate. This optimization is enabled with -Os. This patch does: 1. Add {nooptimize} pseudo prefix to disable instruction size optimization. 2. Add optimize to i386_opcode_modifier to tell assembler that encoding of an instruction may be optimized. gas/ PR gas/22871 * NEWS: Mention -O[2|s]. * config/tc-i386.c (_i386_insn): Add no_optimize. (optimize): New. (optimize_for_space): Likewise. (fits_in_imm7): New function. (fits_in_imm31): Likewise. (optimize_encoding): Likewise. (md_assemble): Call optimize_encoding to optimize encoding. (parse_insn): Handle {nooptimize}. (md_shortopts): Append "O::". (md_parse_option): Handle -On. * doc/c-i386.texi: Document -O0, -O, -O1, -O2 and -Os as well as {nooptimize}. * testsuite/gas/cfi/cfi-x86_64.d: Pass -O0 to assembler. * testsuite/gas/i386/ilp32/cfi/cfi-x86_64.d: Likewise. * testsuite/gas/i386/i386.exp: Run optimize-1, optimize-2, optimize-3, x86-64-optimize-1, x86-64-optimize-2, x86-64-optimize-3 and x86-64-optimize-4. * testsuite/gas/i386/optimize-1.d: New file. * testsuite/gas/i386/optimize-1.s: Likewise. * testsuite/gas/i386/optimize-2.d: Likewise. * testsuite/gas/i386/optimize-2.s: Likewise. * testsuite/gas/i386/optimize-3.d: Likewise. * testsuite/gas/i386/optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-1.s: Likewise. * testsuite/gas/i386/x86-64-optimize-1.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.s: Likewise. * testsuite/gas/i386/x86-64-optimize-3.d: Likewise. * testsuite/gas/i386/x86-64-optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-4.d: Likewise. * testsuite/gas/i386/x86-64-optimize-4.s: Likewise. opcodes/ PR gas/22871 * i386-gen.c (opcode_modifiers): Add Optimize. * i386-opc.h (Optimize): New enum. (i386_opcode_modifier): Add optimize. * i386-opc.tbl: Add "Optimize" to "mov $imm, reg", "sub reg, reg/mem", "test $imm, acc", "test $imm, reg/mem", "and $imm, acc", "and $imm, reg/mem", "xor reg, reg/mem", "movq $imm, reg" and AVX256 and AVX512 versions of vandnps, vandnpd, vpandn, vpandnd, vpandnq, vxorps, vxorpd, vpxor, vpxord and vpxorq. * i386-tbl.h: Regenerated.
2018-02-17Add .nop assembler directiveH.J. Lu1-0/+3
Implement the '.nop SIZE[, CONTROL]' assembler directive, which emits SIZE bytes filled with no-op instructions. SIZE is absolute expression. The optional CONTROL byte controls how no-op instructions should be generated. If the comma and @var{control} are omitted, CONTROL is assumed to be zero. For Intel 80386 and AMD x86-64 targets, CONTROL byte specifies the size limit of a single no-op instruction. The valid values of CONTROL byte are between 0 and 8 for 16-bit mode, between 0 and 10 for 32-bit mode, between 0 and 11 for 64-bit mode. When 0 is used, the no-op size limit is set to the maximum supported size. 2 new relax states, rs_space_nop and rs_fill_nop, are added to enum _relax_state, which are similar to rs_space and rs_fill, respectively, but they fill with no-op instructions, instead of a single byte. A target backend must override the default md_generate_nops to generate proper no-op instructions. Otherwise, an error of unimplemented .nop directive will be issued whenever .nop directive is used. * NEWS: Mention .nop directive. * as.h (_relax_state): Add rs_space_nop and rs_fill_nop. * read.c (potable): Add .nop. (s_nop): New function. * read.h (s_nop): New prototype. * write.c (cvt_frag_to_fill): Handle rs_space_nop and rs_fill_nop. (md_generate_nops): New function. (relax_segment): Likewise. (write_contents): Use md_generate_nops for rs_fill_nop. * config/tc-i386.c (alt64_11): New. (alt64_patt): Likewise. (md_convert_frag): Handle rs_space_nop. (i386_output_nops): New function. (i386_generate_nops): Likewise. (i386_align_code): Call i386_output_nops. * config/tc-i386.h (i386_generate_nops): New. (md_generate_nops): Likewise. * doc/as.texinfo: Document .nop directive. * testsuite/gas/i386/i386.exp: Run .nop directive tests. * testsuite/gas/i386/nop-1.d: New file. * testsuite/gas/i386/nop-1.s: Likewise. * testsuite/gas/i386/nop-2.d: Likewise. * testsuite/gas/i386/nop-2.s: Likewise. * testsuite/gas/i386/nop-3.d: Likewise. * testsuite/gas/i386/nop-3.s: Likewise. * testsuite/gas/i386/nop-4.d: Likewise. * testsuite/gas/i386/nop-4.s: Likewise. * testsuite/gas/i386/nop-5.d: Likewise. * testsuite/gas/i386/nop-5.s: Likewise. * testsuite/gas/i386/nop-6.d: Likewise. * testsuite/gas/i386/nop-6.s: Likewise. * testsuite/gas/i386/nop-bad-1.l: Likewise. * testsuite/gas/i386/nop-bad-1.s: Likewise. * testsuite/gas/i386/x86-64-nop-1.d: Likewise. * testsuite/gas/i386/x86-64-nop-2.d: Likewise. * testsuite/gas/i386/x86-64-nop-3.d: Likewise. * testsuite/gas/i386/x86-64-nop-4.d: Likewise. * testsuite/gas/i386/x86-64-nop-5.d: Likewise. * testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-01-13Add 2.30 markers to NEWS files.Nick Clifton1-0/+2
binutils/ * NEWS: Add marker for 2.30. gas/ * NEWS: Add marker for 2.30. ld/ * NEWS: Add marker for 2.30.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-07-21This patch introduces support for specifing views in .loc directives, so ↵Alexandre Oliva1-0/+2
that the compiler can use the assembler to generate line number information and have the assembler determine view numbers to multiple views at the same program counter. binutils* dwarf.c (struct State_Machine_Registers): Add view field. (reset_state_machine): Reset view. (process_extended_line_op): Reset view when appropriate. (display_debug_lines_raw): Increment or reset view when appropriate. Print nonzero views. Support print view resets, disabled by default. (display_debug_lines_decoded): Likewise. Disambiguate op_code tests, enabling printing of end_sequence. * testsuite/binutils-all/dw2-1.W: Add nonzero views. * testsuite/binutils-all/dw2-3.W: Likewise. * testsuite/binutils-all/dw2-3gabi.W: Likewise. * testsuite/binutils-all/dw5.W: Add end sequence lines. * testsuite/binutils-all/i386/compressed-1a.d: Add nonzero views. * testsuite/binutils-all/libdw2-compressedgabi.out: Likewise. * testsuite/binutils-all/objdump.W: Likewise. * testsuite/binutils-all/objdump.WL: Add end sequence lines. * testsuite/binutils-all/x86-64/compressed-1a.d: Add nonzero views. gas * doc/as.texinfo (.loc): Document view support. * dwarf2dbg.c (unused): Check offset of next in struct line_entry. (current): Initialize view. (force_reset_view, view_assert_failed): New variables. (reverse_line_entry_list): New function. (set_or_check_view): Likewise. (dwarf2_gen_line_info_1): Call it. (dwarf2_where): Set view to NULL. (dwarf2_emit_insn): Return early when called before first file. (dwarf2_directive_loc): Add view support. Emit insn immediately when view option is given. (process_entries): Avoid set_address to reset view when a known address change already implies the view reset. (dwarf2dbg_final_check): New function. * dwarf2dbg.h (struct dwarf2_line_info): Add view. (dwarf2dbg_final_check): Declare. * read.c (s_leb128): Parse expression as deferred. * testsuite/gas/all/gas.exp: Run sleb128-9. * testsuite/gas/all/sleb128-9.d: New. * testsuite/gas/all/sleb128-9.l: New. * testsuite/gas/all/sleb128-9.s: New. * testsuite/gas/elf/dwarf2-1.d: Add nonzero views. * testsuite/gas/elf/dwarf2-2.d: Likewise. * testsuite/gas/elf/dwarf2-5.d: New. * testsuite/gas/elf/dwarf2-5.s: New. * testsuite/gas/elf/dwarf2-6.d: New. * testsuite/gas/elf/dwarf2-6.s: New. * testsuite/gas/elf/dwarf2-7.d: New. * testsuite/gas/elf/dwarf2-7.s: New. * testsuite/gas/elf/dwarf2-8.d: New. * testsuite/gas/elf/dwarf2-8.l: New. * testsuite/gas/elf/dwarf2-8.s: New. * testsuite/gas/elf/dwarf2-9.d: New. * testsuite/gas/elf/dwarf2-9.l: New. * testsuite/gas/elf/dwarf2-9.s: New. * testsuite/gas/elf/dwarf2-10.d: New. * testsuite/gas/elf/dwarf2-10.l: New. * testsuite/gas/elf/dwarf2-10.s: New. * testsuite/gas/elf/dwarf2-11.d: New. * testsuite/gas/elf/dwarf2-11.s: New. * testsuite/gas/elf/dwarf2-12.d: New. * testsuite/gas/elf/dwarf2-12.s: New. * testsuite/gas/elf/dwarf2-13.d: New. * testsuite/gas/elf/dwarf2-13.s: New. * testsuite/gas/elf/dwarf2-14.d: New. * testsuite/gas/elf/dwarf2-14.s: New. * testsuite/gas/elf/dwarf2-15.d: New. * testsuite/gas/elf/dwarf2-15.s: New. * testsuite/gas/elf/dwarf2-16.d: New. * testsuite/gas/elf/dwarf2-16.s: New. * testsuite/gas/elf/dwarf2-17.d: New. * testsuite/gas/elf/dwarf2-17.s: New. * testsuite/gas/elf/dwarf2-18.d: New. * testsuite/gas/elf/dwarf2-18.s: New. * testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests. * testsuite/gas/i386/dw2-compress-1.d: Add nonzero views. * testsuite/gas/i386/dw2-compressed-1.d: Likewise. * testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise. * testsuite/gas/lns/lns-big-delta.d: Likewise. * testsuite/gas/lns/lns-duplicate.d: Likewise. * testsuite/gas/mips/loc-swap-2.d: Likewise. * testsuite/gas/mips/loc-swap-3.d: Likewise. * testsuite/gas/mips/loc-swap.d: Likewise. * testsuite/gas/mips/micromips@loc-swap-2.d: Likewise. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-2.d: Likewise. * testsuite/gas/mips/mips16@loc-swap.d: Likewise. * testsuite/gas/mips/mips16e@loc-swap.d: Likewise. * write.c (write_object_file): Check pending view asserts. (cvt_frag_to_fill): Complain about undefined leb128 operand.
2017-07-04Add markers.Tristan Gingold1-0/+2
binutils/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. gas/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. ld/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29.
2017-06-24[ARM] Add support for ARM Cortex-R52 processorThomas Preud'homme1-1/+2
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to add support for ARM Cortex-R52 processor. === Patch description === This patch adds support for Cortex-R52 as an ARMv8-R processor with CRC extensions. 2017-06-26 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * NEWS: Mention support of ARM Cortex-R52 processor. * config/tc-arm.c (arm_cpus): Add entry for ARM Cortex-R52 processor. * doc/c-arm.texi: Mention support for -mcpu=cortex-r52.
2017-06-24[ARM] Add support for ARMv8-R in assembler and readelfThomas Preud'homme1-0/+2
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to add support for ARMv8-R in GAS: instructions, build attributes and readelf. === Patch description === Although some differences exist for system registers, from GAS point of view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state and a subset of its extensions. This patch therefore introduce a new feature bit to distinguish the availability of the pan, ras and rdma extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd extensions to be used by ARMv8-R. Most of the changes are then in the testsuite to (i) rename source files and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename files with expected output for ARMv8-A build attributes and (iii) add new files with expected output for ARMv8-R build attributes. 2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com> binutils/ * readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R. gas/ * NEWS: Mention support for ARMv8-R architecture. * config/tc-arm.c (arm_archs): Add entry for ARMv8-R. (arm_extensions): Restrict pan, ras and rdma extension to ARMv8-A and make crypto, fp and simd extensions available to ARMv8-R. (cpu_arch_ver): Add entry for ARMv8-R. (aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use logic. * testsuite/gas/arm/armv8-a+fp.s: Rename into ... * testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r+fp.d: New. * testsuite/gas/arm/armv8-a+simd.s: Rename into ... * testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r+simd.d: New. * testsuite/gas/arm/armv8-a-bad.s: Rename into ... * testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a-bad.l: Rename into ... * testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1. * testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble, architecture to assemble for and adjust error output file. * testsuite/gas/arm/armv8-r-bad.d: New. * testsuite/gas/arm/armv8-a-barrier.s: Rename into ... * testsuite/gas/arm/armv8-ar-barrier.s: This. * testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-arm.d: New. * testsuite/gas/arm/armv8-r-barrier-thumb.d: New. * testsuite/gas/arm/armv8-a-it-bad.s: Rename into ... * testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a-it-bad.l: Rename into ... * testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number by 1. * testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble, architecture to assemble for and adjust error output file. * testsuite/gas/arm/armv8-r-it-bad.d: New. * testsuite/gas/arm/armv8-a.s: Rename into ... * testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r.d: New. * testsuite/gas/arm/attr-march-armv8-r+crypto.d: New. * testsuite/gas/arm/attr-march-armv8-r+fp.d: New. * testsuite/gas/arm/attr-march-armv8-r+simd.d: New. * testsuite/gas/arm/attr-march-armv8-r.d: New. * testsuite/gas/arm/crc32.s: Rename into ... * testsuite/gas/arm/crc32-armv8-ar.s: This. * testsuite/gas/arm/crc32.d: Rename into ... * testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble. * testsuite/gas/arm/crc32-armv8-r.d: New. * testsuite/gas/arm/crc32-bad.s: Rename into ... * testsuite/gas/arm/crc32-armv8-ar-bad.s: This. * testsuite/gas/arm/crc32-bad.d: Rename into ... * testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to assemble. * testsuite/gas/arm/crc32-armv8-r-bad.d: New. * testsuite/gas/arm/mask_1.s: Rename into ... * testsuite/gas/arm/mask_1-armv8-ar.s: This. * testsuite/gas/arm/mask_1.d: Rename into ... * testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to assemble. * testsuite/gas/arm/mask_1-armv8-r.d: new. include/ * elf/arm.h (TAG_CPU_ARCH_V8R): New macro. * opcode/arm.h (ARM_EXT2_V8A): New macro. (ARM_AEXT2_V8A): Rename into ... (ARM_AEXT2_V8AR): This. (ARM_AEXT2_V8A): New macro. (ARM_AEXT_V8R): New macro. (ARM_AEXT2_V8R): New macro. (ARM_ARCH_V8R): New macro.
2017-04-04Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXXH.J. Lu1-0/+2
Mark an ALLOC section, which should be placed in special memory area, with SHF_GNU_MBIND. Its sh_info field indicates the special memory type. GNU_MBIND section names start with ".mbind" so that they are placed as orphan sections by linker. All input GNU_MBIND sections with the same sh_type, sh_flags and sh_info are placed in one output GNU_MBIND section. In executable and shared object, create a GNU_MBIND segment for each GNU_MBIND section and its segment type is PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is aligned at page boundary. The assembler syntax: .section .mbind.foo,"adx",%progbits ^ 0: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.foo,"adx",%progbits,0x1 ^ 1: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2 ^ 2: Special memory type. | 'd' for SHF_GNU_MBIND. bfd/ * elf.c (get_program_header_size): Add a GNU_MBIND segment for each GNU_MBIND section and align GNU_MBIND section to page size. (_bfd_elf_map_sections_to_segments): Create a GNU_MBIND segment for each GNU_MBIND section. (_bfd_elf_init_private_section_data): Copy sh_info from input for GNU_MBIND section. binutils/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX. (get_elf_section_flags): Handle SHF_GNU_MBIND. (process_section_headers): Likewise. * testsuite/binutils-all/mbind1.s: New file. * testsuite/binutils-all/objcopy.exp: Run readelf test on mbind1.s. gas/ * NEWS: Mention support for ELF SHF_GNU_MBIND. * config/obj-elf.c (section_match): New. (get_section): Match both sh_info and group name. (obj_elf_change_section): Add argument for sh_info. Pass both sh_info and group name to get_section. Issue an error for SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info. (obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'. (obj_elf_section): Support SHF_GNU_MBIND section info. * config/obj-elf.h (obj_elf_change_section): Add argument for sh_info. * config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texinfo: Document 'd' for SHF_GNU_MBIND. * testsuite/gas/elf/elf.exp: Run section12a, section12b and section13. * testsuite/gas/elf/section10.d: Updated. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section12.s: New file. * testsuite/gas/elf/section12a.d: Likewise. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.l: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.s: Likewise. include/ * elf/common.h (PT_GNU_MBIND_NUM): New. (PT_GNU_MBIND_LO): Likewise. (PT_GNU_MBIND_HI): Likewise. (SHF_GNU_MBIND): Likewise. ld/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place input GNU_MBIND sections with the same type, attributes and sh_info field into a single output GNU_MBIND section. * testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b. * testsuite/ld-elf/mbind1.s: New file. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/mbind2a.s: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise.
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet1-0/+2
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-02-20Downgrade powerpc register error to warningAlan Modra1-2/+2
PR 21118 * NEWS: Revise powerpc register check. * config/tc-ppc.c (ppc_optimize_expr, md_assemble): Make "invalid register expression" a warning.
2017-02-14PowerPC register expression checksAlan Modra1-0/+4
This stops powerpc gas blithely accepting such nonsense as "addi %f4,%cr3,%r31". PR 21118 gas/ * NEWS: Mention powerpc register checks. * config/tc-ppc.c (struct pd_reg): Make value a short. Add flags. (pre_defined_registers): Delete fpscr and pmr entries. Set register type in flags. (cr_names): Set type in flags. (reg_name_search): Return pointer to struct pd_reg rather than value. (register_name): Adjust to suit. Set X_md from flags. (ppc_parse_name): Likewise. (ppc_optimize_expr): New function. (md_assemble): Verify expresion reg flags match operand. * config/tc-ppc.h (md_optimize_expr): Define. (ppc_optimize_expr): Declare. include/ * opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first. (PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define. opcodes/ * ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-31PRU GAS PortDimitar Dimitrov1-0/+2
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * config/obj-elf.c: Ditto. * configure.tgt: Ditto. * config/tc-pru.c: New file. * config/tc-pru.h: New file. * doc/Makefile.am: Add documentation for PRU GAS port. * doc/all.texi, Ditto. * doc/as.texinfo: Ditto. * doc/c-pru.texi: Document PRU GAS options. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. * testsuite/gas/pru/alu.s: Ditto. * testsuite/gas/pru/branch.d: Ditto. * testsuite/gas/pru/branch.s: Ditto. * testsuite/gas/pru/illegal.l: Ditto. * testsuite/gas/pru/illegal.s: Ditto. * testsuite/gas/pru/ldi.d: Ditto. * testsuite/gas/pru/ldi.s: Ditto. * testsuite/gas/pru/ldst.d: Ditto. * testsuite/gas/pru/ldst.s: Ditto. * testsuite/gas/pru/loop.d: Ditto. * testsuite/gas/pru/loop.s: Ditto. * testsuite/gas/pru/misc.d: Ditto. * testsuite/gas/pru/misc.s: Ditto. * testsuite/gas/pru/pru.exp: Ditto. * testsuite/gas/pru/pseudo.d: Ditto. * testsuite/gas/pru/pseudo.s: Ditto. * testsuite/gas/pru/warn_reglabel.l: Ditto. * testsuite/gas/pru/warn_reglabel.s: Ditto. * testsuite/gas/pru/xfr.d: Ditto. * testsuite/gas/pru/xfr.s: Ditto. * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-23Add marker in NEWS filesTristan Gingold1-0/+2
binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28.
2016-11-04Add support for ARM Cortex-M33 processorThomas Preud'homme1-1/+1
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m33): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M33 processor. * NEWS: Mention ARM Cortex-M33 support.
2016-11-04Add support for ARM Cortex-M23 processorThomas Preud'homme1-0/+2
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m23): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M23 processor. * NEWS: Mention ARM Cortex-M23 support.
2016-11-01Add support for RISC-V architecture.Nick Clifton1-0/+2
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-07-01Add marker for 2.27 branch.Tristan Gingold1-0/+3
binutils/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. gas/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. ld/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27.
2016-06-30Allow ARC target to be configured with --with-cpu=<cpu-name>.Andrew Burgess1-0/+3
gas * config.in (TARGET_WITH_CPU): Undefine. * configure.ac: Add --with-cpu support, and define in config.h. * configure: Regenerate. * config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU. * NEWS: Mention new configure option.
2016-06-29Default to --enable-compressed-debug-sections=gas for Linux/x86H.J. Lu1-0/+2
--enable-compressed-debug-sections=gas added to binutils 2.26. Make it default for Linux/x86 targets in 2.27. * NEWS: Mention --enable-compressed-debug-sections=gas is the default for Linux/x86 targets. * configure.tgt (ac_default_compressed_debug_sections): Default to yes for Linux/x86 targets.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-0/+3
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-05-10Add support for ARMv8-M Mainline with DSP extensionThomas Preud'homme1-0/+4
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (elf32_arm_merge_eabi_attributes): Add merging logic for Tag_DSP_extension. binutils/ * readelf.c (display_arm_attribute): Add output for Tag_DSP_extension. (arm_attr_public_tags): Define DSP_extension attribute. gas/ * NEWS: Document ARMv8-M and ARMv8-M Security and DSP Extensions. * config/tc-arm.c (arm_ext_dsp): New feature for Thumb DSP instructions. (arm_extensions): Add dsp extension for ARMv8-M Mainline. (aeabi_set_public_attributes): Memorize the feature bits of the architecture selected for Tag_CPU_arch. Use it to set Tag_DSP_extension to 1 for ARMv8-M Mainline with DSP extension. (arm_convert_symbolic_attribute): Define Tag_DSP_extension. * testsuite/gas/arm/arch7em-bad.d: Rename to ... * testsuite/gas/arm/arch7em-bad-1.d: This. * testsuite/gas/arm/arch7em-bad-2.d: New file. * testsuite/gas/arm/arch7em-bad-3.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/attr-march-armv8m.main.dsp.d: Likewise. include/ * elf/arm.h (Tag_DSP_extension): Define. ld/ * testsuite/ld-arm/arm-elf.exp (EABI attribute merging 10 (DSP)): New test. * testsuite/ld-arm/attr-merge-10b-dsp.s: New file. * testsuite/ld-arm/attr-merge-10-dsp.attr: Likewise.
2016-04-12Add support for .extCondCode, .extCoreRegister and .extAuxRegister.Claudiu Zissulescu1-0/+4
gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textauxregister.d: New file. * testsuite/gas/arc/textauxregister.s: Likewise. * testsuite/gas/arc/textcondcode.d: Likewise. * testsuite/gas/arc/textcondcode.s: Likewise. * testsuite/gas/arc/textcoreregister.d: Likewise. * testsuite/gas/arc/textcoreregister.s: Likewise. * testsuite/gas/arc/textpseudoop.d: Likewise. * testsuite/gas/arc/textpseudoop.s: Likewise. * testsuite/gas/arc/ld2.d: Update test. * testsuite/gas/arc/st.d: Likewise. * testsuite/gas/arc/taux.d: Likewise. * doc/c-arc.texi (ARC Directives): Add .extCondCode, .extCoreRegister and .extAuxRegister documentation. * config/tc-arc.c (arc_extcorereg): New function. (md_pseudo_table): Add .extCondCode, .extCoreRegister and .extAuxRegister pseudo-ops. (extRegister_t): New type. (ext_condcode, arc_aux_hash): New global variable. (find_opcode_match): Check for extensions. (preprocess_operands): Likewise. (md_begin): Add aux registers in a hash. (assemble_insn): Update use arc_flags member. (tokenize_extregister): New function. (create_extcore_section): Likewise. * config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Increase to 10. (arc_flags): Delete code, add flgp. include/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (flag_class_t): Update. (ARC_OPCODE_NONE): Define. (ARC_OPCODE_ARCALL): Likewise. (ARC_OPCODE_ARCFPX): Likewise. (ARC_REGISTER_READONLY): Likewise. (ARC_REGISTER_WRITEONLY): Likewise. (ARC_REGISTER_NOSHORT_CUT): Likewise. (arc_aux_reg): Add cpu. opcodes/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format): Check for extension flags. (print_flags): New function. (print_insn_arc): Update for .extCondCode, .extCoreRegister and .extAuxRegister. * arc-ext.c (arcExtMap_coreRegName): Use LAST_EXTENSION_CORE_REGISTER. (arcExtMap_coreReadWrite): Likewise. (dump_ARC_extmap): Update printing. * arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag. (arc_aux_regs): Add cpu field. * arc-regs.h: Add cpu field, lower case name aux registers. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+7
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-15Enhance GAS's .section directive so that it can take numeric values for the ↵Nick Clifton1-0/+2
flags and type fields. (ELF only) gas * doc/as.texinfo (.section): Document that numeric values can now be used for the flags and type fields of the ELF target's .section directive. Add notes about the restrictions on setting flags and types. * config/obj-elf.c (obj_elf_change_section): Allow known sections to be given processor specific section types. Allow processor and application specific flags of a section to be set after definition. (obj_elf_parse_section_letters): Handle parsing numeric values. (obj_elf_section_type): Handle parsing numeric values. (obj_elf_section): Allow numeric type values. * config/obj-elf.h (obj_elf_change_section): Update prototype. * testsuite/gas/elf/section10.d: New test. * testsuite/gas/elf/section10.s: Source file for new test. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. * NEWS: Mention the new feature. bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values for length and type fields. Use a signed value for the suffix_length field. binutils* readelf.c (get_section_type_name): Add hex prefix to offsets printed for LOPROC and LOOS values. Ensure that a result is always returned for the V850 target, even when an unrecognised processor specific value is encountered. (process_section_headers): Display key values in the order in which they appear to the user. Add the "C (compressed)" value to the list. ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/ld-i386/pr12921.d: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sh/tlsbin-2.d: Likewise. * testsuite/ld-sh/tlspic-2.d: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/ilp32-4.d: Likewise. * testsuite/ld-x86-64/pr12718.d: Likewise. * testsuite/ld-x86-64/pr12921.d: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/split-by-file.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-xtensa/tlsbin.rd: Likewise. * testsuite/ld-xtensa/tlspic.rd: Likewise.
2016-02-10Add support for ARC instruction relaxation in the assembler.Claudiu Zissulescu1-0/+2
gas/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS) (MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE): Define. (arc_flags, arc_relax_type): New structure. * config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY) (RELAX_TABLE_ENTRY_MAX): New define. (relaxation_state, md_relax_table, arc_relaxable_insns) (arc_num_relaxable_ins): New variable. (rlx_operand_type, arc_rlx_types): New enums. (arc_relaxable_ins): New structure. (OPTION_RELAX): New option. (arc_insn): New relax member. (arc_flags): Remove. (relax_insn_p): New function. (apply_fixups): Likewise. (relaxable_operand): Likewise. (may_relax_expr): Likewise. (relaxable_flag): Likewise. (arc_pcrel_adjust): Likewise. (md_estimate_size_before_relax): Implement. (md_convert_frag): Likewise. (md_parse_option): Handle new mrelax option. (md_show_usage): Likewise. (assemble_insn): Set relax member. (emit_insn0): New function. (emit_insn1): Likewise. (emit_insn): Handle relaxation case. * NEWS: Mention the new relaxation option. * doc/c-arc.texi (ARC Options): Document new mrelax option. gas/testsuite 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> * gas/arc/relax-avoid1.d: New file. * gas/arc/relax-avoid1.s: Likewise. * gas/arc/relax-avoid2.d: Likewise. * gas/arc/relax-avoid2.s: Likewise. * gas/arc/relax-avoid3.d: Likewise. * gas/arc/relax-avoid3.s: Likewise. * gas/arc/relax-b.d: Likewise. * gas/arc/relax-b.s: Likewise. include/opcode/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc.h (arc_opcode arc_relax_opcodes, arc_num_relax_opcodes): Declare. opcodes/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New variable.
2016-02-03Add -mrelax-relocations= to x86 assemblerH.J. Lu1-0/+7
The x86 relax relocations introduced in binutils 2.26 aren't supported by linker on Solaris older than Solaris 12. To use x86 assembler with older Solaris linker, this patch adds 1. A command line option -mrelax-relocations= to x86 assembler to control whether to generate relax relocations. 2. A configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. It is defaulted to yes, except for x86 Solaris targets older than Solaris 12. gas/ PR gas/19520 * NEWS: Mention new command line option -mrelax-relocations and new configure option --enable-x86-relax-relocations for x86 target. * config.in: Regenerated. * configure.ac: Add --enable-x86-relax-relocations. (ac_default_x86_relax_relocations): New. Default to 1 except for x86 Solaris targets older than Solaris 12. (DEFAULT_GENERATE_X86_RELAX_RELOCATIONS): Define. * configure: Likewise. * config/tc-i386.c (generate_relax_relocations): New. (OPTION_MRELAX_RELOCATIONS): Likewise. (output_disp): Don't generate relax relocations if generate_relax_relocations is 0. (md_longopts): Add -mrelax-relocations. (md_show_usage): Likewise. (md_parse_option): Handle OPTION_MRELAX_RELOCATIONS. * doc/c-i386.texi: Document -mrelax-relocations=. * testsuite/gas/i386/got-no-relax.d: New file. * testsuite/gas/i386/x86-64-gotpcrel-no-relax.d: Likewise. * testsuite/gas/i386/got.d: Pass -mrelax-relocations=yes to as. * testsuite/gas/i386/localpic.d: Likewise. * testsuite/gas/i386/mixed-mode-reloc32.d: Likewise. * testsuite/gas/i386/reloc32.d: Likewise. * testsuite/gas/i386/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/x86-64-localpic.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise. * testsuite/gas/i386/i386.exp: Run got-no-relax and x86-64-gotpcrel-no-relax. ld/ PR gas/19520 * testsuite/ld-i386/branch1.d: Pass -mrelax-relocations=yes to as. * testsuite/ld-i386/call1.d: Likewise. * testsuite/ld-i386/call2.d: Likewise. * testsuite/ld-i386/call3a.d: Likewise. * testsuite/ld-i386/call3b.d: Likewise. * testsuite/ld-i386/call3c.d: Likewise. * testsuite/ld-i386/call3d.d: Likewise. * testsuite/ld-i386/call3e.d: Likewise. * testsuite/ld-i386/call3f.d: Likewise. * testsuite/ld-i386/call3g.d: Likewise. * testsuite/ld-i386/call3h.d: Likewise. * testsuite/ld-i386/jmp1.d: Likewise. * testsuite/ld-i386/jmp2.d: Likewise. * testsuite/ld-i386/lea1c.d: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/load2.d: Likewise. * testsuite/ld-i386/load3.d: Likewise. * testsuite/ld-i386/load4a.d: Likewise. * testsuite/ld-i386/load5a.d: Likewise. * testsuite/ld-i386/mov2b.d: Likewise. * testsuite/ld-i386/mov3.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-x86-64/call1a.d: Likewise. * testsuite/ld-x86-64/call1b.d: Likewise. * testsuite/ld-x86-64/call1c.d: Likewise. * testsuite/ld-x86-64/call1d.d: Likewise. * testsuite/ld-x86-64/call1e.d: Likewise. * testsuite/ld-x86-64/call1f.d: Likewise. * testsuite/ld-x86-64/call1h.d: Likewise. * testsuite/ld-x86-64/call1i.d: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-i386/got1a.S: Load GOT into %ecx and use it. * testsuite/ld-i386/got1.dd: Updated. * testsuite/ld-i386/got1d.S (1): Removed. * testsuite/ld-i386/i386.exp: Add -Wa,-mrelax-relocations=yes. * testsuite/ld-x86-64/x86-64.exp: Likewise.
generated by cgit v1.1 at 2024-09-08 17:08:14 +0000