diff options
Diffstat (limited to 'binutils')
31 files changed, 32933 insertions, 0 deletions
diff --git a/binutils/arlex.c b/binutils/arlex.c new file mode 100644 index 0000000..0857a8f --- /dev/null +++ b/binutils/arlex.c @@ -0,0 +1,2071 @@ + +#line 3 "arlex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 35 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <stdlib.h> + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include <inttypes.h> +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + yy_size_t yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 40 +#define YY_END_OF_BUFFER 41 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[177] = + { 0, + 0, 0, 41, 40, 39, 38, 35, 32, 33, 36, + 40, 34, 37, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 36, 31, 37, 35, + 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 7, 35, 35, 35, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 22, 35, 35, 35, + 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, + + 35, 35, 35, 10, 11, 12, 35, 15, 35, 35, + 35, 35, 35, 35, 35, 35, 35, 25, 26, 27, + 35, 30, 35, 35, 35, 3, 35, 35, 35, 35, + 35, 35, 35, 35, 35, 18, 35, 35, 35, 35, + 35, 35, 35, 1, 2, 4, 5, 35, 35, 35, + 35, 35, 16, 17, 19, 20, 35, 35, 35, 35, + 35, 35, 8, 9, 13, 14, 35, 23, 24, 28, + 29, 35, 35, 6, 21, 0 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 3, 1, 1, 1, 4, 1, 1, 1, 5, + 6, 7, 8, 9, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 10, 1, + 1, 1, 1, 1, 11, 12, 13, 14, 15, 16, + 4, 17, 18, 4, 4, 19, 20, 21, 22, 23, + 4, 24, 25, 26, 27, 28, 4, 29, 30, 4, + 1, 4, 1, 1, 4, 1, 31, 32, 33, 34, + + 35, 36, 4, 37, 38, 4, 4, 39, 40, 41, + 42, 43, 4, 44, 45, 46, 47, 48, 4, 49, + 50, 4, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[51] = + { 0, + 1, 2, 1, 3, 1, 1, 1, 1, 1, 1, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 + } ; + +static yyconst flex_int16_t yy_base[180] = + { 0, + 0, 0, 193, 194, 194, 194, 0, 194, 194, 0, + 190, 194, 0, 177, 32, 37, 32, 163, 174, 170, + 164, 171, 174, 169, 149, 15, 22, 17, 135, 146, + 142, 136, 143, 146, 141, 0, 0, 194, 0, 161, + 159, 158, 153, 147, 156, 143, 149, 148, 141, 150, + 141, 135, 138, 127, 125, 124, 119, 113, 122, 109, + 115, 114, 107, 116, 107, 101, 104, 43, 136, 135, + 130, 129, 0, 119, 123, 118, 114, 118, 119, 122, + 124, 25, 104, 103, 98, 97, 0, 87, 91, 86, + 82, 86, 87, 90, 92, 105, 100, 97, 94, 93, + + 105, 106, 102, 0, 0, 0, 104, 0, 92, 75, + 70, 67, 64, 63, 75, 76, 72, 0, 0, 0, + 74, 0, 62, 91, 88, 0, 86, 85, 73, 85, + 79, 83, 70, 62, 59, 0, 57, 56, 44, 56, + 50, 54, 41, 0, 0, 0, 0, 63, 58, 59, + 67, 66, 0, 0, 0, 0, 38, 33, 34, 42, + 41, 51, 0, 0, 0, 0, 30, 0, 0, 0, + 0, 43, 21, 0, 0, 194, 65, 66, 69 + } ; + +static yyconst flex_int16_t yy_def[180] = + { 0, + 176, 1, 176, 176, 176, 176, 177, 176, 176, 178, + 176, 176, 179, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 178, 176, 179, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 177, 177, 177, 177, 177, + 177, 177, 177, 177, 177, 0, 176, 176, 176 + } ; + +static yyconst flex_int16_t yy_nxt[245] = + { 0, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, + 14, 7, 15, 16, 17, 18, 19, 7, 20, 7, + 7, 21, 7, 22, 23, 7, 7, 24, 7, 7, + 25, 7, 26, 27, 28, 29, 30, 7, 31, 7, + 7, 32, 7, 33, 34, 7, 7, 35, 7, 7, + 41, 43, 45, 55, 44, 42, 57, 59, 56, 58, + 46, 96, 97, 110, 111, 60, 37, 36, 37, 39, + 175, 39, 174, 173, 172, 171, 170, 169, 168, 167, + 166, 165, 164, 163, 162, 161, 160, 159, 158, 157, + 156, 155, 154, 153, 152, 151, 150, 149, 148, 147, + + 146, 145, 144, 143, 142, 141, 140, 139, 138, 137, + 136, 135, 134, 133, 132, 131, 130, 129, 128, 127, + 126, 125, 124, 123, 122, 121, 120, 119, 118, 117, + 116, 115, 114, 113, 112, 109, 108, 107, 106, 105, + 104, 103, 102, 101, 100, 99, 98, 95, 94, 93, + 92, 91, 90, 89, 88, 87, 86, 85, 84, 83, + 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, + 72, 71, 70, 69, 68, 67, 66, 65, 64, 63, + 62, 61, 54, 53, 52, 51, 50, 49, 48, 47, + 40, 38, 176, 3, 176, 176, 176, 176, 176, 176, + + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176 + } ; + +static yyconst flex_int16_t yy_chk[245] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 15, 16, 17, 26, 16, 15, 27, 28, 26, 27, + 17, 68, 68, 82, 82, 28, 178, 177, 178, 179, + 173, 179, 172, 167, 162, 161, 160, 159, 158, 157, + 152, 151, 150, 149, 148, 143, 142, 141, 140, 139, + 138, 137, 135, 134, 133, 132, 131, 130, 129, 128, + + 127, 125, 124, 123, 121, 117, 116, 115, 114, 113, + 112, 111, 110, 109, 107, 103, 102, 101, 100, 99, + 98, 97, 96, 95, 94, 93, 92, 91, 90, 89, + 88, 86, 85, 84, 83, 81, 80, 79, 78, 77, + 76, 75, 74, 72, 71, 70, 69, 67, 66, 65, + 64, 63, 62, 61, 60, 59, 58, 57, 56, 55, + 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, + 44, 43, 42, 41, 40, 35, 34, 33, 32, 31, + 30, 29, 25, 24, 23, 22, 21, 20, 19, 18, + 14, 11, 3, 176, 176, 176, 176, 176, 176, 176, + + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 176 + } ; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "arlex.l" +#line 2 "arlex.l" +/* arlex.l - Strange script language lexer */ + +/* Copyright 1992, 1997, 2000, 2001, 2002, 2003, 2004, 2005, 2007 + Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + + +/* Contributed by Steve Chamberlain <sac@cygnus.com>. */ + +#define DONTDECLARE_MALLOC +#include "ansidecl.h" +#include "libiberty.h" +#include "arparse.h" + +#define YY_NO_UNPUT + +extern int yylex (void); + +int linenumber; +#line 595 "arlex.c" + +#define INITIAL 0 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include <unistd.h> +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +yy_size_t yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + + static void yyunput (int c,char *buf_ptr ); + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + yy_size_t n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 42 "arlex.l" + + +#line 780 "arlex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 177 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 194 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +YY_RULE_SETUP +#line 44 "arlex.l" +{ return ADDLIB; } + YY_BREAK +case 2: +YY_RULE_SETUP +#line 45 "arlex.l" +{ return ADDMOD; } + YY_BREAK +case 3: +YY_RULE_SETUP +#line 46 "arlex.l" +{ return CLEAR; } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 47 "arlex.l" +{ return CREATE; } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 48 "arlex.l" +{ return DELETE; } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 49 "arlex.l" +{ return DIRECTORY; } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 50 "arlex.l" +{ return END; } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 51 "arlex.l" +{ return EXTRACT; } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 52 "arlex.l" +{ return FULLDIR; } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 53 "arlex.l" +{ return HELP; } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 54 "arlex.l" +{ return LIST; } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 55 "arlex.l" +{ return OPEN; } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 56 "arlex.l" +{ return REPLACE; } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 57 "arlex.l" +{ return VERBOSE; } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 58 "arlex.l" +{ return SAVE; } + YY_BREAK +case 16: +YY_RULE_SETUP +#line 59 "arlex.l" +{ return ADDLIB; } + YY_BREAK +case 17: +YY_RULE_SETUP +#line 60 "arlex.l" +{ return ADDMOD; } + YY_BREAK +case 18: +YY_RULE_SETUP +#line 61 "arlex.l" +{ return CLEAR; } + YY_BREAK +case 19: +YY_RULE_SETUP +#line 62 "arlex.l" +{ return CREATE; } + YY_BREAK +case 20: +YY_RULE_SETUP +#line 63 "arlex.l" +{ return DELETE; } + YY_BREAK +case 21: +YY_RULE_SETUP +#line 64 "arlex.l" +{ return DIRECTORY; } + YY_BREAK +case 22: +YY_RULE_SETUP +#line 65 "arlex.l" +{ return END; } + YY_BREAK +case 23: +YY_RULE_SETUP +#line 66 "arlex.l" +{ return EXTRACT; } + YY_BREAK +case 24: +YY_RULE_SETUP +#line 67 "arlex.l" +{ return FULLDIR; } + YY_BREAK +case 25: +YY_RULE_SETUP +#line 68 "arlex.l" +{ return HELP; } + YY_BREAK +case 26: +YY_RULE_SETUP +#line 69 "arlex.l" +{ return LIST; } + YY_BREAK +case 27: +YY_RULE_SETUP +#line 70 "arlex.l" +{ return OPEN; } + YY_BREAK +case 28: +YY_RULE_SETUP +#line 71 "arlex.l" +{ return REPLACE; } + YY_BREAK +case 29: +YY_RULE_SETUP +#line 72 "arlex.l" +{ return VERBOSE; } + YY_BREAK +case 30: +YY_RULE_SETUP +#line 73 "arlex.l" +{ return SAVE; } + YY_BREAK +case 31: +/* rule 31 can match eol */ +YY_RULE_SETUP +#line 74 "arlex.l" +{ linenumber ++; } + YY_BREAK +case 32: +YY_RULE_SETUP +#line 75 "arlex.l" +{ return '('; } + YY_BREAK +case 33: +YY_RULE_SETUP +#line 76 "arlex.l" +{ return ')'; } + YY_BREAK +case 34: +YY_RULE_SETUP +#line 77 "arlex.l" +{ return ','; } + YY_BREAK +case 35: +YY_RULE_SETUP +#line 78 "arlex.l" +{ + yylval.name = xstrdup (yytext); + return FILENAME; + } + YY_BREAK +case 36: +YY_RULE_SETUP +#line 82 "arlex.l" +{ } + YY_BREAK +case 37: +YY_RULE_SETUP +#line 83 "arlex.l" +{ } + YY_BREAK +case 38: +YY_RULE_SETUP +#line 84 "arlex.l" +{ } + YY_BREAK +case 39: +/* rule 39 can match eol */ +YY_RULE_SETUP +#line 85 "arlex.l" +{ linenumber ++; return NEWLINE; } + YY_BREAK +case 40: +YY_RULE_SETUP +#line 87 "arlex.l" +ECHO; + YY_BREAK +#line 1068 "arlex.c" +case YY_STATE_EOF(INITIAL): + yyterminate(); + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + yy_size_t num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + yy_size_t new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 177 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 177 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 176); + + return yy_is_jam ? 0 : yy_current_state; +} + + static void yyunput (int c, register char * yy_bp ) +{ + register char *yy_cp; + + yy_cp = (yy_c_buf_p); + + /* undo effects of setting up yytext */ + *yy_cp = (yy_hold_char); + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + { /* need to shift things up to make room */ + /* +2 for EOB chars. */ + register yy_size_t number_to_move = (yy_n_chars) + 2; + register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ + YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; + register char *source = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; + + while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + *--dest = *--source; + + yy_cp += (int) (dest - source); + yy_bp += (int) (dest - source); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + YY_FATAL_ERROR( "flex scanner push-back overflow" ); + } + + *--yy_cp = (char) c; + + (yytext_ptr) = yy_bp; + (yy_hold_char) = *yy_cp; + (yy_c_buf_p) = yy_cp; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return 0; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + yy_size_t num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n, i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +yy_size_t yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 87 "arlex.l" + + +#ifndef yywrap +/* Needed for lex, though not flex. */ +int yywrap(void) { return 1; } +#endif + diff --git a/binutils/arparse.c b/binutils/arparse.c new file mode 100644 index 0000000..6251c32 --- /dev/null +++ b/binutils/arparse.c @@ -0,0 +1,1770 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NEWLINE = 258, + VERBOSE = 259, + FILENAME = 260, + ADDLIB = 261, + LIST = 262, + ADDMOD = 263, + CLEAR = 264, + CREATE = 265, + DELETE = 266, + DIRECTORY = 267, + END = 268, + EXTRACT = 269, + FULLDIR = 270, + HELP = 271, + QUIT = 272, + REPLACE = 273, + SAVE = 274, + OPEN = 275 + }; +#endif +/* Tokens. */ +#define NEWLINE 258 +#define VERBOSE 259 +#define FILENAME 260 +#define ADDLIB 261 +#define LIST 262 +#define ADDMOD 263 +#define CLEAR 264 +#define CREATE 265 +#define DELETE 266 +#define DIRECTORY 267 +#define END 268 +#define EXTRACT 269 +#define FULLDIR 270 +#define HELP 271 +#define QUIT 272 +#define REPLACE 273 +#define SAVE 274 +#define OPEN 275 + + + + +/* Copy the first part of user declarations. */ +#line 1 "arparse.y" + +/* arparse.y - Stange script language parser */ + +/* Copyright 1992, 1993, 1995, 1997, 1999, 2002, 2003, 2005, 2007 + Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + + +/* Contributed by Steve Chamberlain + sac@cygnus.com + +*/ +#define DONTDECLARE_MALLOC +#include "sysdep.h" +#include "bfd.h" +#include "arsup.h" +extern int verbose; +extern int yylex (void); +static int yyerror (const char *); + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 38 "arparse.y" +{ + char *name; +struct list *list ; + +} +/* Line 193 of yacc.c. */ +#line 179 "arparse.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 192 "arparse.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 3 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 34 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 24 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 22 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 42 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 53 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 275 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 21, 22, 2, 2, 23, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 4, 7, 10, 11, 14, 16, 18, + 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, + 40, 42, 44, 45, 48, 51, 53, 56, 59, 61, + 63, 66, 69, 73, 78, 80, 81, 85, 86, 90, + 91, 93, 94 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 25, 0, -1, -1, 26, 27, -1, 27, 28, -1, + -1, 29, 3, -1, 37, -1, 38, -1, 45, -1, + 40, -1, 39, -1, 32, -1, 34, -1, 36, -1, + 30, -1, 31, -1, 33, -1, 35, -1, 13, -1, + 1, -1, 5, -1, -1, 14, 43, -1, 18, 43, + -1, 9, -1, 11, 43, -1, 8, 43, -1, 7, + -1, 19, -1, 20, 5, -1, 10, 5, -1, 6, + 5, 42, -1, 12, 5, 42, 41, -1, 5, -1, + -1, 21, 43, 22, -1, -1, 43, 44, 5, -1, + -1, 23, -1, -1, 4, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint8 yyrline[] = +{ + 0, 69, 69, 69, 73, 74, 78, 82, 83, 84, + 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + 95, 96, 97, 102, 107, 112, 117, 121, 126, 131, + 138, 143, 149, 153, 160, 162, 166, 169, 173, 179, + 184, 185, 190 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "NEWLINE", "VERBOSE", "FILENAME", + "ADDLIB", "LIST", "ADDMOD", "CLEAR", "CREATE", "DELETE", "DIRECTORY", + "END", "EXTRACT", "FULLDIR", "HELP", "QUIT", "REPLACE", "SAVE", "OPEN", + "'('", "')'", "','", "$accept", "start", "@1", "session", "command_line", + "command", "extract_command", "replace_command", "clear_command", + "delete_command", "addmod_command", "list_command", "save_command", + "open_command", "create_command", "addlib_command", "directory_command", + "optional_filename", "modulelist", "modulename", "optcomma", + "verbose_command", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 40, 41, 44 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 24, 26, 25, 27, 27, 28, 29, 29, 29, + 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, + 29, 29, 29, 30, 31, 32, 33, 34, 35, 36, + 37, 38, 39, 40, 41, 41, 42, 42, 43, 43, + 44, 44, 45 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 0, 2, 2, 0, 2, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 0, 2, 2, 1, 2, 2, 1, 1, + 2, 2, 3, 4, 1, 0, 3, 0, 3, 0, + 1, 0, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 2, 0, 5, 1, 0, 20, 42, 21, 0, 28, + 39, 25, 0, 39, 0, 19, 39, 39, 29, 0, + 4, 0, 15, 16, 12, 17, 13, 18, 14, 7, + 8, 11, 10, 9, 37, 27, 31, 26, 37, 23, + 24, 30, 6, 39, 32, 40, 0, 35, 41, 38, + 34, 33, 36 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 1, 2, 4, 20, 21, 22, 23, 24, 25, + 26, 27, 28, 29, 30, 31, 32, 51, 44, 35, + 46, 33 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -14 +static const yytype_int8 yypact[] = +{ + -14, 1, -14, -14, 5, -14, -14, -14, 2, -14, + -14, -14, 21, -14, 22, -14, -14, -14, -14, 23, + -14, 26, -14, -14, -14, -14, -14, -14, -14, -14, + -14, -14, -14, -14, 10, -3, -14, -3, 10, -3, + -3, -14, -14, -14, -14, -14, 27, 28, -1, -14, + -14, -14, -14 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -14, -14, -14, -14, -14, -14, -14, -14, -14, -14, + -14, -14, -14, -14, -14, -14, -14, -14, -4, -13, + -14, -14 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -42 +static const yytype_int8 yytable[] = +{ + 37, 3, -41, 39, 40, -3, 5, 34, -22, 6, + 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, + 45, 52, 45, 17, 18, 19, 36, 38, 41, 42, + 48, 43, 49, 50, 47 +}; + +static const yytype_uint8 yycheck[] = +{ + 13, 0, 5, 16, 17, 0, 1, 5, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 23, 22, 23, 18, 19, 20, 5, 5, 5, 3, + 43, 21, 5, 5, 38 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 25, 26, 0, 27, 1, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 18, 19, 20, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, + 38, 39, 40, 45, 5, 43, 5, 43, 5, 43, + 43, 5, 3, 21, 42, 23, 44, 42, 43, 5, + 5, 41, 22 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 69 "arparse.y" + { prompt(); } + break; + + case 6: +#line 78 "arparse.y" + { prompt(); } + break; + + case 19: +#line 94 "arparse.y" + { ar_end(); return 0; } + break; + + case 21: +#line 96 "arparse.y" + { yyerror("foo"); } + break; + + case 23: +#line 103 "arparse.y" + { ar_extract((yyvsp[(2) - (2)].list)); } + break; + + case 24: +#line 108 "arparse.y" + { ar_replace((yyvsp[(2) - (2)].list)); } + break; + + case 25: +#line 113 "arparse.y" + { ar_clear(); } + break; + + case 26: +#line 118 "arparse.y" + { ar_delete((yyvsp[(2) - (2)].list)); } + break; + + case 27: +#line 122 "arparse.y" + { ar_addmod((yyvsp[(2) - (2)].list)); } + break; + + case 28: +#line 127 "arparse.y" + { ar_list(); } + break; + + case 29: +#line 132 "arparse.y" + { ar_save(); } + break; + + case 30: +#line 139 "arparse.y" + { ar_open((yyvsp[(2) - (2)].name),0); } + break; + + case 31: +#line 144 "arparse.y" + { ar_open((yyvsp[(2) - (2)].name),1); } + break; + + case 32: +#line 150 "arparse.y" + { ar_addlib((yyvsp[(2) - (3)].name),(yyvsp[(3) - (3)].list)); } + break; + + case 33: +#line 154 "arparse.y" + { ar_directory((yyvsp[(2) - (4)].name), (yyvsp[(3) - (4)].list), (yyvsp[(4) - (4)].name)); } + break; + + case 34: +#line 161 "arparse.y" + { (yyval.name) = (yyvsp[(1) - (1)].name); } + break; + + case 35: +#line 162 "arparse.y" + { (yyval.name) = 0; } + break; + + case 36: +#line 167 "arparse.y" + { (yyval.list) = (yyvsp[(2) - (3)].list); } + break; + + case 37: +#line 169 "arparse.y" + { (yyval.list) = 0; } + break; + + case 38: +#line 174 "arparse.y" + { struct list *n = (struct list *) malloc(sizeof(struct list)); + n->next = (yyvsp[(1) - (3)].list); + n->name = (yyvsp[(3) - (3)].name); + (yyval.list) = n; + } + break; + + case 39: +#line 179 "arparse.y" + { (yyval.list) = 0; } + break; + + case 42: +#line 191 "arparse.y" + { verbose = !verbose; } + break; + + +/* Line 1267 of yacc.c. */ +#line 1546 "arparse.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 195 "arparse.y" + + +static int +yyerror (const char *x ATTRIBUTE_UNUSED) +{ + extern int linenumber; + + printf (_("Syntax error in archive script, line %d\n"), linenumber + 1); + return 0; +} + diff --git a/binutils/arparse.h b/binutils/arparse.h new file mode 100644 index 0000000..0926a61 --- /dev/null +++ b/binutils/arparse.h @@ -0,0 +1,102 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NEWLINE = 258, + VERBOSE = 259, + FILENAME = 260, + ADDLIB = 261, + LIST = 262, + ADDMOD = 263, + CLEAR = 264, + CREATE = 265, + DELETE = 266, + DIRECTORY = 267, + END = 268, + EXTRACT = 269, + FULLDIR = 270, + HELP = 271, + QUIT = 272, + REPLACE = 273, + SAVE = 274, + OPEN = 275 + }; +#endif +/* Tokens. */ +#define NEWLINE 258 +#define VERBOSE 259 +#define FILENAME 260 +#define ADDLIB 261 +#define LIST 262 +#define ADDMOD 263 +#define CLEAR 264 +#define CREATE 265 +#define DELETE 266 +#define DIRECTORY 267 +#define END 268 +#define EXTRACT 269 +#define FULLDIR 270 +#define HELP 271 +#define QUIT 272 +#define REPLACE 273 +#define SAVE 274 +#define OPEN 275 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 38 "arparse.y" +{ + char *name; +struct list *list ; + +} +/* Line 1529 of yacc.c. */ +#line 95 "arparse.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/deflex.c b/binutils/deflex.c new file mode 100644 index 0000000..27871e0 --- /dev/null +++ b/binutils/deflex.c @@ -0,0 +1,2097 @@ + +#line 3 "deflex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 35 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <stdlib.h> + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include <inttypes.h> +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + yy_size_t yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 41 +#define YY_END_OF_BUFFER 42 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[198] = + { 0, + 0, 0, 42, 41, 34, 36, 35, 33, 41, 28, + 41, 31, 40, 38, 27, 32, 37, 39, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 0, 29, 28, 0, 30, 31, 27, + 32, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 12, 6, 28, 7, + 28, 28, 28, 28, 28, 28, 28, 28, 1, 28, + + 28, 28, 16, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 17, 28, 28, 28, 28, 28, 28, 28, 28, 28, + 28, 14, 28, 28, 28, 19, 21, 28, 28, 28, + 28, 28, 28, 18, 9, 28, 10, 28, 28, 2, + 28, 28, 15, 28, 28, 28, 28, 11, 13, 28, + 5, 28, 28, 22, 28, 8, 28, 28, 28, 28, + 28, 28, 20, 4, 28, 28, 28, 24, 28, 26, + 28, 3, 28, 28, 23, 25, 0 + + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 1, 1, 4, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 5, 1, 6, 1, 7, 1, 1, 8, 1, + 1, 9, 1, 10, 7, 11, 12, 13, 13, 13, + 13, 13, 13, 13, 13, 13, 13, 7, 14, 1, + 15, 1, 7, 16, 17, 18, 19, 20, 21, 22, + 23, 24, 25, 7, 26, 27, 28, 29, 30, 31, + 7, 32, 33, 34, 35, 36, 37, 38, 39, 40, + 1, 1, 1, 1, 7, 1, 22, 22, 22, 22, + + 22, 22, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 22, + 7, 7, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[41] = + { 0, + 1, 1, 2, 1, 1, 1, 3, 1, 1, 1, + 1, 4, 5, 1, 1, 4, 6, 6, 6, 6, + 6, 6, 3, 3, 3, 3, 3, 3, 3, 3, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 + } ; + +static yyconst flex_int16_t yy_base[205] = + { 0, + 0, 0, 229, 230, 230, 230, 230, 230, 222, 0, + 219, 0, 230, 230, 0, 0, 230, 0, 209, 195, + 24, 186, 202, 14, 197, 186, 27, 188, 198, 25, + 197, 196, 184, 209, 230, 0, 206, 230, 0, 0, + 0, 0, 180, 27, 178, 178, 27, 193, 178, 183, + 189, 179, 177, 175, 178, 185, 182, 183, 170, 181, + 165, 164, 170, 173, 172, 159, 174, 171, 170, 158, + 156, 156, 151, 152, 149, 161, 34, 145, 160, 145, + 146, 154, 157, 147, 141, 139, 0, 0, 138, 0, + 139, 135, 137, 135, 135, 29, 149, 140, 0, 136, + + 139, 145, 0, 136, 139, 132, 132, 30, 132, 135, + 138, 129, 119, 118, 126, 116, 122, 119, 115, 115, + 124, 127, 109, 112, 121, 119, 106, 111, 108, 106, + 0, 106, 103, 112, 99, 91, 97, 99, 95, 88, + 99, 0, 93, 103, 94, 0, 0, 97, 91, 87, + 90, 84, 83, 0, 0, 95, 0, 97, 80, 0, + 92, 91, 0, 78, 70, 91, 74, 0, 0, 82, + 0, 89, 88, 0, 84, 0, 82, 85, 83, 69, + 66, 56, 0, 0, 39, 36, 35, 0, 44, 0, + 43, 0, 40, 39, 0, 0, 230, 67, 71, 77, + + 83, 85, 91, 95 + } ; + +static yyconst flex_int16_t yy_def[205] = + { 0, + 197, 1, 197, 197, 197, 197, 197, 197, 198, 199, + 200, 201, 197, 197, 202, 203, 197, 204, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 198, 197, 199, 200, 197, 201, 202, + 203, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 199, 199, 199, 199, + 199, 199, 199, 199, 199, 199, 0, 197, 197, 197, + + 197, 197, 197, 197 + } ; + +static yyconst flex_int16_t yy_nxt[271] = + { 0, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, + 14, 4, 15, 16, 17, 18, 10, 19, 20, 21, + 22, 10, 10, 23, 24, 10, 25, 26, 27, 10, + 28, 29, 30, 31, 10, 32, 33, 10, 10, 10, + 45, 49, 50, 53, 46, 57, 65, 69, 58, 59, + 100, 117, 128, 118, 129, 66, 54, 70, 60, 196, + 195, 194, 193, 192, 191, 190, 101, 34, 34, 34, + 34, 34, 34, 36, 36, 36, 36, 37, 37, 37, + 37, 37, 37, 39, 189, 39, 39, 39, 39, 40, + 40, 41, 188, 41, 41, 41, 41, 42, 187, 186, + + 42, 185, 184, 183, 182, 181, 180, 179, 178, 177, + 176, 175, 174, 173, 172, 171, 170, 169, 168, 167, + 166, 165, 164, 163, 162, 161, 160, 159, 158, 157, + 156, 155, 154, 153, 152, 151, 150, 149, 148, 147, + 146, 145, 144, 143, 142, 141, 140, 139, 138, 137, + 136, 135, 134, 133, 132, 131, 130, 127, 126, 125, + 124, 123, 122, 121, 120, 119, 116, 115, 114, 113, + 112, 111, 110, 109, 108, 107, 106, 105, 104, 103, + 102, 99, 98, 97, 96, 95, 94, 93, 92, 91, + 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, + + 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, + 68, 67, 64, 38, 35, 63, 62, 61, 56, 55, + 52, 51, 48, 47, 44, 43, 38, 35, 197, 3, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197 + } ; + +static yyconst flex_int16_t yy_chk[271] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 21, 24, 24, 27, 21, 30, 44, 47, 30, 30, + 77, 96, 108, 96, 108, 44, 27, 47, 30, 194, + 193, 191, 189, 187, 186, 185, 77, 198, 198, 198, + 198, 198, 198, 199, 199, 199, 199, 200, 200, 200, + 200, 200, 200, 201, 182, 201, 201, 201, 201, 202, + 202, 203, 181, 203, 203, 203, 203, 204, 180, 179, + + 204, 178, 177, 175, 173, 172, 170, 167, 166, 165, + 164, 162, 161, 159, 158, 156, 153, 152, 151, 150, + 149, 148, 145, 144, 143, 141, 140, 139, 138, 137, + 136, 135, 134, 133, 132, 130, 129, 128, 127, 126, + 125, 124, 123, 122, 121, 120, 119, 118, 117, 116, + 115, 114, 113, 112, 111, 110, 109, 107, 106, 105, + 104, 102, 101, 100, 98, 97, 95, 94, 93, 92, + 91, 89, 86, 85, 84, 83, 82, 81, 80, 79, + 78, 76, 75, 74, 73, 72, 71, 70, 69, 68, + 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, + + 57, 56, 55, 54, 53, 52, 51, 50, 49, 48, + 46, 45, 43, 37, 34, 33, 32, 31, 29, 28, + 26, 25, 23, 22, 20, 19, 11, 9, 3, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197, + 197, 197, 197, 197, 197, 197, 197, 197, 197, 197 + } ; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "deflex.l" +#line 2 "deflex.l" + +/* Copyright 1995, 1997, 1998, 1999, 2002, 2003, 2004, 2005, 2007 + Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + + +/* Contributed by Steve Chamberlain: sac@cygnus.com */ + +#define DONTDECLARE_MALLOC +#include "libiberty.h" +#include "defparse.h" +#include "dlltool.h" + +#define YY_NO_UNPUT + +int linenumber; + +#line 607 "deflex.c" + +#define INITIAL 0 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include <unistd.h> +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +yy_size_t yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + + static void yyunput (int c,char *buf_ptr ); + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + yy_size_t n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 36 "deflex.l" + +#line 791 "deflex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 198 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 230 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +YY_RULE_SETUP +#line 37 "deflex.l" +{ return NAME;} + YY_BREAK +case 2: +YY_RULE_SETUP +#line 38 "deflex.l" +{ return LIBRARY;} + YY_BREAK +case 3: +YY_RULE_SETUP +#line 39 "deflex.l" +{ return DESCRIPTION;} + YY_BREAK +case 4: +YY_RULE_SETUP +#line 40 "deflex.l" +{ return STACKSIZE;} + YY_BREAK +case 5: +YY_RULE_SETUP +#line 41 "deflex.l" +{ return HEAPSIZE;} + YY_BREAK +case 6: +YY_RULE_SETUP +#line 42 "deflex.l" +{ return CODE;} + YY_BREAK +case 7: +YY_RULE_SETUP +#line 43 "deflex.l" +{ return DATA;} + YY_BREAK +case 8: +YY_RULE_SETUP +#line 44 "deflex.l" +{ return SECTIONS;} + YY_BREAK +case 9: +YY_RULE_SETUP +#line 45 "deflex.l" +{ return EXPORTS;} + YY_BREAK +case 10: +YY_RULE_SETUP +#line 46 "deflex.l" +{ return IMPORTS;} + YY_BREAK +case 11: +YY_RULE_SETUP +#line 47 "deflex.l" +{ return VERSIONK;} + YY_BREAK +case 12: +YY_RULE_SETUP +#line 48 "deflex.l" +{ return BASE;} + YY_BREAK +case 13: +YY_RULE_SETUP +#line 49 "deflex.l" +{ return CONSTANT; } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 50 "deflex.l" +{ return NONAME; } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 51 "deflex.l" +{ return PRIVATE; } + YY_BREAK +case 16: +YY_RULE_SETUP +#line 52 "deflex.l" +{ return READ;} + YY_BREAK +case 17: +YY_RULE_SETUP +#line 53 "deflex.l" +{ return WRITE;} + YY_BREAK +case 18: +YY_RULE_SETUP +#line 54 "deflex.l" +{ return EXECUTE;} + YY_BREAK +case 19: +YY_RULE_SETUP +#line 55 "deflex.l" +{ return SHARED;} + YY_BREAK +case 20: +YY_RULE_SETUP +#line 56 "deflex.l" +{ return NONSHARED;} + YY_BREAK +case 21: +YY_RULE_SETUP +#line 57 "deflex.l" +{ return SINGLE;} + YY_BREAK +case 22: +YY_RULE_SETUP +#line 58 "deflex.l" +{ return MULTIPLE;} + YY_BREAK +case 23: +YY_RULE_SETUP +#line 59 "deflex.l" +{ return INITINSTANCE;} + YY_BREAK +case 24: +YY_RULE_SETUP +#line 60 "deflex.l" +{ return INITGLOBAL;} + YY_BREAK +case 25: +YY_RULE_SETUP +#line 61 "deflex.l" +{ return TERMINSTANCE;} + YY_BREAK +case 26: +YY_RULE_SETUP +#line 62 "deflex.l" +{ return TERMGLOBAL;} + YY_BREAK +case 27: +YY_RULE_SETUP +#line 64 "deflex.l" +{ yylval.number = strtol (yytext,0,0); + return NUMBER; } + YY_BREAK +case 28: +YY_RULE_SETUP +#line 67 "deflex.l" +{ + yylval.id = xstrdup (yytext); + return ID; + } + YY_BREAK +case 29: +/* rule 29 can match eol */ +YY_RULE_SETUP +#line 72 "deflex.l" +{ + yylval.id = xstrdup (yytext+1); + yylval.id[yyleng-2] = 0; + return ID; + } + YY_BREAK +case 30: +/* rule 30 can match eol */ +YY_RULE_SETUP +#line 78 "deflex.l" +{ + yylval.id = xstrdup (yytext+1); + yylval.id[yyleng-2] = 0; + return ID; + } + YY_BREAK +case 31: +YY_RULE_SETUP +#line 83 "deflex.l" +{ } + YY_BREAK +case 32: +YY_RULE_SETUP +#line 84 "deflex.l" +{ } + YY_BREAK +case 33: +YY_RULE_SETUP +#line 85 "deflex.l" +{ } + YY_BREAK +case 34: +YY_RULE_SETUP +#line 86 "deflex.l" +{ } + YY_BREAK +case 35: +YY_RULE_SETUP +#line 87 "deflex.l" +{ } + YY_BREAK +case 36: +/* rule 36 can match eol */ +YY_RULE_SETUP +#line 88 "deflex.l" +{ linenumber ++ ;} + YY_BREAK +case 37: +YY_RULE_SETUP +#line 89 "deflex.l" +{ return '=';} + YY_BREAK +case 38: +YY_RULE_SETUP +#line 90 "deflex.l" +{ return '.';} + YY_BREAK +case 39: +YY_RULE_SETUP +#line 91 "deflex.l" +{ return '@';} + YY_BREAK +case 40: +YY_RULE_SETUP +#line 92 "deflex.l" +{ return ',';} + YY_BREAK +case 41: +YY_RULE_SETUP +#line 93 "deflex.l" +ECHO; + YY_BREAK +#line 1094 "deflex.c" +case YY_STATE_EOF(INITIAL): + yyterminate(); + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + yy_size_t num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + yy_size_t new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 198 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 198 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 197); + + return yy_is_jam ? 0 : yy_current_state; +} + + static void yyunput (int c, register char * yy_bp ) +{ + register char *yy_cp; + + yy_cp = (yy_c_buf_p); + + /* undo effects of setting up yytext */ + *yy_cp = (yy_hold_char); + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + { /* need to shift things up to make room */ + /* +2 for EOB chars. */ + register yy_size_t number_to_move = (yy_n_chars) + 2; + register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ + YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; + register char *source = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; + + while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + *--dest = *--source; + + yy_cp += (int) (dest - source); + yy_bp += (int) (dest - source); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + YY_FATAL_ERROR( "flex scanner push-back overflow" ); + } + + *--yy_cp = (char) c; + + (yytext_ptr) = yy_bp; + (yy_hold_char) = *yy_cp; + (yy_c_buf_p) = yy_cp; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return 0; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + yy_size_t num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n, i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +yy_size_t yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 93 "deflex.l" + + +#ifndef yywrap +/* Needed for lex, though not flex. */ +int yywrap(void) { return 1; } +#endif + diff --git a/binutils/defparse.c b/binutils/defparse.c new file mode 100644 index 0000000..52ef115 --- /dev/null +++ b/binutils/defparse.c @@ -0,0 +1,1943 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NAME = 258, + LIBRARY = 259, + DESCRIPTION = 260, + STACKSIZE = 261, + HEAPSIZE = 262, + CODE = 263, + DATA = 264, + SECTIONS = 265, + EXPORTS = 266, + IMPORTS = 267, + VERSIONK = 268, + BASE = 269, + CONSTANT = 270, + READ = 271, + WRITE = 272, + EXECUTE = 273, + SHARED = 274, + NONSHARED = 275, + NONAME = 276, + PRIVATE = 277, + SINGLE = 278, + MULTIPLE = 279, + INITINSTANCE = 280, + INITGLOBAL = 281, + TERMINSTANCE = 282, + TERMGLOBAL = 283, + ID = 284, + NUMBER = 285 + }; +#endif +/* Tokens. */ +#define NAME 258 +#define LIBRARY 259 +#define DESCRIPTION 260 +#define STACKSIZE 261 +#define HEAPSIZE 262 +#define CODE 263 +#define DATA 264 +#define SECTIONS 265 +#define EXPORTS 266 +#define IMPORTS 267 +#define VERSIONK 268 +#define BASE 269 +#define CONSTANT 270 +#define READ 271 +#define WRITE 272 +#define EXECUTE 273 +#define SHARED 274 +#define NONSHARED 275 +#define NONAME 276 +#define PRIVATE 277 +#define SINGLE 278 +#define MULTIPLE 279 +#define INITINSTANCE 280 +#define INITGLOBAL 281 +#define TERMINSTANCE 282 +#define TERMGLOBAL 283 +#define ID 284 +#define NUMBER 285 + + + + +/* Copy the first part of user declarations. */ +#line 1 "defparse.y" + /* defparse.y - parser for .def files */ + +/* Copyright 1995, 1997, 1998, 1999, 2001, 2004, 2005, 2007 + Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + +#include "sysdep.h" +#include "bfd.h" +#include "libiberty.h" +#include "dlltool.h" + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 29 "defparse.y" +{ + char *id; + int number; +} +/* Line 193 of yacc.c. */ +#line 189 "defparse.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 202 "defparse.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 38 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 114 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 35 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 23 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 68 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 98 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 285 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 33, 2, 31, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 32, 2, 2, 34, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 6, 8, 12, 17, 20, 23, 27, + 31, 34, 37, 40, 43, 46, 51, 52, 55, 63, + 66, 68, 76, 84, 90, 96, 102, 108, 112, 116, + 119, 121, 124, 128, 130, 132, 133, 136, 137, 139, + 141, 143, 145, 147, 149, 151, 153, 154, 156, 157, + 159, 160, 162, 163, 165, 169, 170, 173, 174, 177, + 182, 183, 187, 188, 189, 193, 195, 197, 199 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 36, 0, -1, 36, 37, -1, 37, -1, 3, 52, + 55, -1, 4, 52, 55, 56, -1, 11, 38, -1, + 5, 29, -1, 6, 30, 46, -1, 7, 30, 46, + -1, 8, 44, -1, 9, 44, -1, 10, 42, -1, + 12, 40, -1, 13, 30, -1, 13, 30, 31, 30, + -1, -1, 38, 39, -1, 29, 54, 53, 49, 48, + 50, 51, -1, 40, 41, -1, 41, -1, 29, 32, + 29, 31, 29, 31, 29, -1, 29, 32, 29, 31, + 29, 31, 30, -1, 29, 32, 29, 31, 29, -1, + 29, 32, 29, 31, 30, -1, 29, 31, 29, 31, + 29, -1, 29, 31, 29, 31, 30, -1, 29, 31, + 29, -1, 29, 31, 30, -1, 42, 43, -1, 43, + -1, 29, 44, -1, 44, 45, 47, -1, 47, -1, + 33, -1, -1, 33, 30, -1, -1, 16, -1, 17, + -1, 18, -1, 19, -1, 20, -1, 23, -1, 24, + -1, 15, -1, -1, 21, -1, -1, 9, -1, -1, + 22, -1, -1, 29, -1, 29, 31, 29, -1, -1, + 34, 30, -1, -1, 32, 29, -1, 32, 29, 31, + 29, -1, -1, 14, 32, 30, -1, -1, -1, 56, + 45, 57, -1, 25, -1, 26, -1, 27, -1, 28, + -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint8 yyrline[] = +{ + 0, 46, 46, 47, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, 66, 68, 72, 76, + 77, 81, 82, 83, 84, 85, 86, 87, 88, 92, + 93, 97, 101, 102, 106, 107, 109, 110, 114, 115, + 116, 117, 118, 119, 120, 124, 125, 129, 130, 134, + 135, 139, 140, 143, 144, 150, 154, 155, 159, 160, + 166, 169, 170, 173, 175, 179, 180, 181, 182 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "NAME", "LIBRARY", "DESCRIPTION", + "STACKSIZE", "HEAPSIZE", "CODE", "DATA", "SECTIONS", "EXPORTS", + "IMPORTS", "VERSIONK", "BASE", "CONSTANT", "READ", "WRITE", "EXECUTE", + "SHARED", "NONSHARED", "NONAME", "PRIVATE", "SINGLE", "MULTIPLE", + "INITINSTANCE", "INITGLOBAL", "TERMINSTANCE", "TERMGLOBAL", "ID", + "NUMBER", "'.'", "'='", "','", "'@'", "$accept", "start", "command", + "explist", "expline", "implist", "impline", "seclist", "secline", + "attr_list", "opt_comma", "opt_number", "attr", "opt_CONSTANT", + "opt_NONAME", "opt_DATA", "opt_PRIVATE", "opt_name", "opt_ordinal", + "opt_equal_name", "opt_base", "option_list", "option", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, + 285, 46, 61, 44, 64 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 35, 36, 36, 37, 37, 37, 37, 37, 37, + 37, 37, 37, 37, 37, 37, 38, 38, 39, 40, + 40, 41, 41, 41, 41, 41, 41, 41, 41, 42, + 42, 43, 44, 44, 45, 45, 46, 46, 47, 47, + 47, 47, 47, 47, 47, 48, 48, 49, 49, 50, + 50, 51, 51, 52, 52, 52, 53, 53, 54, 54, + 54, 55, 55, 56, 56, 57, 57, 57, 57 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 2, 1, 3, 4, 2, 2, 3, 3, + 2, 2, 2, 2, 2, 4, 0, 2, 7, 2, + 1, 7, 7, 5, 5, 5, 5, 3, 3, 2, + 1, 2, 3, 1, 1, 0, 2, 0, 1, 1, + 1, 1, 1, 1, 1, 1, 0, 1, 0, 1, + 0, 1, 0, 1, 3, 0, 2, 0, 2, 4, + 0, 3, 0, 0, 3, 1, 1, 1, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 0, 55, 55, 0, 0, 0, 0, 0, 0, 16, + 0, 0, 0, 3, 53, 62, 62, 7, 37, 37, + 38, 39, 40, 41, 42, 43, 44, 10, 33, 11, + 0, 12, 30, 6, 0, 13, 20, 14, 1, 2, + 0, 0, 4, 63, 0, 8, 9, 34, 0, 31, + 29, 60, 17, 0, 0, 19, 0, 54, 0, 5, + 36, 32, 0, 57, 27, 28, 0, 15, 61, 0, + 58, 0, 48, 0, 0, 65, 66, 67, 68, 64, + 0, 56, 47, 46, 25, 26, 23, 24, 59, 45, + 50, 0, 49, 52, 21, 22, 51, 18 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 12, 13, 33, 52, 35, 36, 31, 32, 27, + 48, 45, 28, 90, 83, 93, 97, 15, 72, 63, + 42, 59, 79 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -26 +static const yytype_int8 yypact[] = +{ + 32, -12, -12, 17, -8, 33, -4, -4, 35, -26, + 36, 37, 21, -26, 38, 48, 48, -26, 39, 39, + -26, -26, -26, -26, -26, -26, -26, -15, -26, -15, + -4, 35, -26, 41, -25, 36, -26, 40, -26, -26, + 44, 34, -26, -26, 45, -26, -26, -26, -4, -15, + -26, 42, -26, -19, 47, -26, 49, -26, 50, 22, + -26, -26, 52, 43, 51, -26, 53, -26, -26, 26, + 54, 56, 57, 27, 29, -26, -26, -26, -26, -26, + 58, -26, -26, 68, -26, -26, 59, -26, -26, -26, + 79, 31, -26, 46, -26, -26, -26, -26 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -26, -26, 77, -26, -26, -26, 60, -26, 61, -7, + 55, 72, 62, -26, -26, -26, -26, 91, -26, -26, + 78, -26, -26 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -36 +static const yytype_int8 yytable[] = +{ + 29, -35, -35, -35, -35, -35, 53, 54, -35, -35, + 64, 65, 20, 21, 22, 23, 24, 14, 47, 25, + 26, 38, 18, 49, 1, 2, 3, 4, 5, 6, + 7, 8, 9, 10, 11, 1, 2, 3, 4, 5, + 6, 7, 8, 9, 10, 11, 17, -35, -35, -35, + -35, 75, 76, 77, 78, 47, 84, 85, 86, 87, + 94, 95, 41, 19, 30, 34, 58, 37, 96, 40, + 51, 56, 44, 57, 62, 60, 66, 71, 82, 67, + 68, 70, 73, 89, 74, 80, 81, 88, 92, 39, + 91, 46, 50, 16, 43, 55, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 61, 0, 0, 0, 69 +}; + +static const yytype_int8 yycheck[] = +{ + 7, 16, 17, 18, 19, 20, 31, 32, 23, 24, + 29, 30, 16, 17, 18, 19, 20, 29, 33, 23, + 24, 0, 30, 30, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 29, 25, 26, 27, + 28, 25, 26, 27, 28, 33, 29, 30, 29, 30, + 29, 30, 14, 30, 29, 29, 32, 30, 22, 31, + 29, 31, 33, 29, 32, 30, 29, 34, 21, 30, + 30, 29, 31, 15, 31, 31, 30, 29, 9, 12, + 31, 19, 31, 2, 16, 35, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + 48, -1, -1, -1, 59 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 36, 37, 29, 52, 52, 29, 30, 30, + 16, 17, 18, 19, 20, 23, 24, 44, 47, 44, + 29, 42, 43, 38, 29, 40, 41, 30, 0, 37, + 31, 14, 55, 55, 33, 46, 46, 33, 45, 44, + 43, 29, 39, 31, 32, 41, 31, 29, 32, 56, + 30, 47, 32, 54, 29, 30, 29, 30, 30, 45, + 29, 34, 53, 31, 31, 25, 26, 27, 28, 57, + 31, 30, 21, 49, 29, 30, 29, 30, 29, 15, + 48, 31, 9, 50, 29, 30, 22, 51 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 4: +#line 51 "defparse.y" + { def_name ((yyvsp[(2) - (3)].id), (yyvsp[(3) - (3)].number)); } + break; + + case 5: +#line 52 "defparse.y" + { def_library ((yyvsp[(2) - (4)].id), (yyvsp[(3) - (4)].number)); } + break; + + case 7: +#line 54 "defparse.y" + { def_description ((yyvsp[(2) - (2)].id));} + break; + + case 8: +#line 55 "defparse.y" + { def_stacksize ((yyvsp[(2) - (3)].number), (yyvsp[(3) - (3)].number));} + break; + + case 9: +#line 56 "defparse.y" + { def_heapsize ((yyvsp[(2) - (3)].number), (yyvsp[(3) - (3)].number));} + break; + + case 10: +#line 57 "defparse.y" + { def_code ((yyvsp[(2) - (2)].number));} + break; + + case 11: +#line 58 "defparse.y" + { def_data ((yyvsp[(2) - (2)].number));} + break; + + case 14: +#line 61 "defparse.y" + { def_version ((yyvsp[(2) - (2)].number),0);} + break; + + case 15: +#line 62 "defparse.y" + { def_version ((yyvsp[(2) - (4)].number),(yyvsp[(4) - (4)].number));} + break; + + case 18: +#line 73 "defparse.y" + { def_exports ((yyvsp[(1) - (7)].id), (yyvsp[(2) - (7)].id), (yyvsp[(3) - (7)].number), (yyvsp[(4) - (7)].number), (yyvsp[(5) - (7)].number), (yyvsp[(6) - (7)].number), (yyvsp[(7) - (7)].number));} + break; + + case 21: +#line 81 "defparse.y" + { def_import ((yyvsp[(1) - (7)].id),(yyvsp[(3) - (7)].id),(yyvsp[(5) - (7)].id),(yyvsp[(7) - (7)].id), 0); } + break; + + case 22: +#line 82 "defparse.y" + { def_import ((yyvsp[(1) - (7)].id),(yyvsp[(3) - (7)].id),(yyvsp[(5) - (7)].id), 0,(yyvsp[(7) - (7)].number)); } + break; + + case 23: +#line 83 "defparse.y" + { def_import ((yyvsp[(1) - (5)].id),(yyvsp[(3) - (5)].id), 0,(yyvsp[(5) - (5)].id), 0); } + break; + + case 24: +#line 84 "defparse.y" + { def_import ((yyvsp[(1) - (5)].id),(yyvsp[(3) - (5)].id), 0, 0,(yyvsp[(5) - (5)].number)); } + break; + + case 25: +#line 85 "defparse.y" + { def_import ( 0,(yyvsp[(1) - (5)].id),(yyvsp[(3) - (5)].id),(yyvsp[(5) - (5)].id), 0); } + break; + + case 26: +#line 86 "defparse.y" + { def_import ( 0,(yyvsp[(1) - (5)].id),(yyvsp[(3) - (5)].id), 0,(yyvsp[(5) - (5)].number)); } + break; + + case 27: +#line 87 "defparse.y" + { def_import ( 0,(yyvsp[(1) - (3)].id), 0,(yyvsp[(3) - (3)].id), 0); } + break; + + case 28: +#line 88 "defparse.y" + { def_import ( 0,(yyvsp[(1) - (3)].id), 0, 0,(yyvsp[(3) - (3)].number)); } + break; + + case 31: +#line 97 "defparse.y" + { def_section ((yyvsp[(1) - (2)].id),(yyvsp[(2) - (2)].number));} + break; + + case 36: +#line 109 "defparse.y" + { (yyval.number)=(yyvsp[(2) - (2)].number);} + break; + + case 37: +#line 110 "defparse.y" + { (yyval.number)=-1;} + break; + + case 38: +#line 114 "defparse.y" + { (yyval.number) = 1; } + break; + + case 39: +#line 115 "defparse.y" + { (yyval.number) = 2; } + break; + + case 40: +#line 116 "defparse.y" + { (yyval.number) = 4; } + break; + + case 41: +#line 117 "defparse.y" + { (yyval.number) = 8; } + break; + + case 42: +#line 118 "defparse.y" + { (yyval.number) = 0; } + break; + + case 43: +#line 119 "defparse.y" + { (yyval.number) = 0; } + break; + + case 44: +#line 120 "defparse.y" + { (yyval.number) = 0; } + break; + + case 45: +#line 124 "defparse.y" + {(yyval.number)=1;} + break; + + case 46: +#line 125 "defparse.y" + {(yyval.number)=0;} + break; + + case 47: +#line 129 "defparse.y" + {(yyval.number)=1;} + break; + + case 48: +#line 130 "defparse.y" + {(yyval.number)=0;} + break; + + case 49: +#line 134 "defparse.y" + { (yyval.number) = 1; } + break; + + case 50: +#line 135 "defparse.y" + { (yyval.number) = 0; } + break; + + case 51: +#line 139 "defparse.y" + { (yyval.number) = 1; } + break; + + case 52: +#line 140 "defparse.y" + { (yyval.number) = 0; } + break; + + case 53: +#line 143 "defparse.y" + { (yyval.id) =(yyvsp[(1) - (1)].id); } + break; + + case 54: +#line 145 "defparse.y" + { + char *name = xmalloc (strlen ((yyvsp[(1) - (3)].id)) + 1 + strlen ((yyvsp[(3) - (3)].id)) + 1); + sprintf (name, "%s.%s", (yyvsp[(1) - (3)].id), (yyvsp[(3) - (3)].id)); + (yyval.id) = name; + } + break; + + case 55: +#line 150 "defparse.y" + { (yyval.id)=""; } + break; + + case 56: +#line 154 "defparse.y" + { (yyval.number)=(yyvsp[(2) - (2)].number);} + break; + + case 57: +#line 155 "defparse.y" + { (yyval.number)=-1;} + break; + + case 58: +#line 159 "defparse.y" + { (yyval.id) = (yyvsp[(2) - (2)].id); } + break; + + case 59: +#line 161 "defparse.y" + { + char *name = xmalloc (strlen ((yyvsp[(2) - (4)].id)) + 1 + strlen ((yyvsp[(4) - (4)].id)) + 1); + sprintf (name, "%s.%s", (yyvsp[(2) - (4)].id), (yyvsp[(4) - (4)].id)); + (yyval.id) = name; + } + break; + + case 60: +#line 166 "defparse.y" + { (yyval.id) = 0; } + break; + + case 61: +#line 169 "defparse.y" + { (yyval.number)= (yyvsp[(3) - (3)].number);} + break; + + case 62: +#line 170 "defparse.y" + { (yyval.number)=-1;} + break; + + +/* Line 1267 of yacc.c. */ +#line 1730 "defparse.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + + diff --git a/binutils/defparse.h b/binutils/defparse.h new file mode 100644 index 0000000..312fb41 --- /dev/null +++ b/binutils/defparse.h @@ -0,0 +1,121 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NAME = 258, + LIBRARY = 259, + DESCRIPTION = 260, + STACKSIZE = 261, + HEAPSIZE = 262, + CODE = 263, + DATA = 264, + SECTIONS = 265, + EXPORTS = 266, + IMPORTS = 267, + VERSIONK = 268, + BASE = 269, + CONSTANT = 270, + READ = 271, + WRITE = 272, + EXECUTE = 273, + SHARED = 274, + NONSHARED = 275, + NONAME = 276, + PRIVATE = 277, + SINGLE = 278, + MULTIPLE = 279, + INITINSTANCE = 280, + INITGLOBAL = 281, + TERMINSTANCE = 282, + TERMGLOBAL = 283, + ID = 284, + NUMBER = 285 + }; +#endif +/* Tokens. */ +#define NAME 258 +#define LIBRARY 259 +#define DESCRIPTION 260 +#define STACKSIZE 261 +#define HEAPSIZE 262 +#define CODE 263 +#define DATA 264 +#define SECTIONS 265 +#define EXPORTS 266 +#define IMPORTS 267 +#define VERSIONK 268 +#define BASE 269 +#define CONSTANT 270 +#define READ 271 +#define WRITE 272 +#define EXECUTE 273 +#define SHARED 274 +#define NONSHARED 275 +#define NONAME 276 +#define PRIVATE 277 +#define SINGLE 278 +#define MULTIPLE 279 +#define INITINSTANCE 280 +#define INITGLOBAL 281 +#define TERMINSTANCE 282 +#define TERMGLOBAL 283 +#define ID 284 +#define NUMBER 285 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 29 "defparse.y" +{ + char *id; + int number; +} +/* Line 1529 of yacc.c. */ +#line 114 "defparse.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/doc/addr2line.1 b/binutils/doc/addr2line.1 new file mode 100644 index 0000000..c77f989 --- /dev/null +++ b/binutils/doc/addr2line.1 @@ -0,0 +1,273 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "ADDR2LINE 1" +.TH ADDR2LINE 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +addr2line \- convert addresses into file names and line numbers. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +addr2line [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR] + [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]] + [\fB\-e\fR \fIfilename\fR|\fB\-\-exe=\fR\fIfilename\fR] + [\fB\-f\fR|\fB\-\-functions\fR] [\fB\-s\fR|\fB\-\-basename\fR] + [\fB\-i\fR|\fB\-\-inlines\fR] + [\fB\-j\fR|\fB\-\-section=\fR\fIname\fR] + [\fB\-H\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] + [addr addr ...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBaddr2line\fR translates addresses into file names and line numbers. +Given an address in an executable or an offset in a section of a relocatable +object, it uses the debugging information to figure out which file name and +line number are associated with it. +.PP +The executable or relocatable object to use is specified with the \fB\-e\fR +option. The default is the file \fIa.out\fR. The section in the relocatable +object to use is specified with the \fB\-j\fR option. +.PP +\&\fBaddr2line\fR has two modes of operation. +.PP +In the first, hexadecimal addresses are specified on the command line, +and \fBaddr2line\fR displays the file name and line number for each +address. +.PP +In the second, \fBaddr2line\fR reads hexadecimal addresses from +standard input, and prints the file name and line number for each +address on standard output. In this mode, \fBaddr2line\fR may be used +in a pipe to convert dynamically chosen addresses. +.PP +The format of the output is \fB\s-1FILENAME:LINENO\s0\fR. The file name and +line number for each address is printed on a separate line. If the +\&\fB\-f\fR option is used, then each \fB\s-1FILENAME:LINENO\s0\fR line is +preceded by a \fB\s-1FUNCTIONNAME\s0\fR line which is the name of the function +containing the address. +.PP +If the file name or function name can not be determined, +\&\fBaddr2line\fR will print two question marks in their place. If the +line number can not be determined, \fBaddr2line\fR will print 0. +.SH "OPTIONS" +.IX Header "OPTIONS" +The long and short forms of options, shown here as alternatives, are +equivalent. +.IP "\fB\-b\fR \fIbfdname\fR" 4 +.IX Item "-b bfdname" +.PD 0 +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +.PD +Specify that the object-code format for the object files is +\&\fIbfdname\fR. +.IP "\fB\-C\fR" 4 +.IX Item "-C" +.PD 0 +.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4 +.IX Item "--demangle[=style]" +.PD +Decode (\fIdemangle\fR) low-level symbol names into user-level names. +Besides removing any initial underscore prepended by the system, this +makes \*(C+ function names readable. Different compilers have different +mangling styles. The optional demangling style argument can be used to +choose an appropriate demangling style for your compiler. +.IP "\fB\-e\fR \fIfilename\fR" 4 +.IX Item "-e filename" +.PD 0 +.IP "\fB\-\-exe=\fR\fIfilename\fR" 4 +.IX Item "--exe=filename" +.PD +Specify the name of the executable for which addresses should be +translated. The default file is \fIa.out\fR. +.IP "\fB\-f\fR" 4 +.IX Item "-f" +.PD 0 +.IP "\fB\-\-functions\fR" 4 +.IX Item "--functions" +.PD +Display function names as well as file and line number information. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-basenames\fR" 4 +.IX Item "--basenames" +.PD +Display only the base of each file name. +.IP "\fB\-i\fR" 4 +.IX Item "-i" +.PD 0 +.IP "\fB\-\-inlines\fR" 4 +.IX Item "--inlines" +.PD +If the address belongs to a function that was inlined, the source +information for all enclosing scopes back to the first non-inlined +function will also be printed. For example, if \f(CW\*(C`main\*(C'\fR inlines +\&\f(CW\*(C`callee1\*(C'\fR which inlines \f(CW\*(C`callee2\*(C'\fR, and address is from +\&\f(CW\*(C`callee2\*(C'\fR, the source information for \f(CW\*(C`callee1\*(C'\fR and \f(CW\*(C`main\*(C'\fR +will also be printed. +.IP "\fB\-j\fR" 4 +.IX Item "-j" +.PD 0 +.IP "\fB\-\-section\fR" 4 +.IX Item "--section" +.PD +Read offsets relative to the specified section instead of absolute addresses. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/ar.1 b/binutils/doc/ar.1 new file mode 100644 index 0000000..9fa94e1 --- /dev/null +++ b/binutils/doc/ar.1 @@ -0,0 +1,429 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "AR 1" +.TH AR 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +ar \- create, modify, and extract from archives +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +ar [\fB\-\-plugin\fR \fIname\fR] [\fB\-X32_64\fR] [\fB\-\fR]\fIp\fR[\fImod\fR [\fIrelpos\fR] [\fIcount\fR]] \fIarchive\fR [\fImember\fR...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +The \s-1GNU\s0 \fBar\fR program creates, modifies, and extracts from +archives. An \fIarchive\fR is a single file holding a collection of +other files in a structure that makes it possible to retrieve +the original individual files (called \fImembers\fR of the archive). +.PP +The original files' contents, mode (permissions), timestamp, owner, and +group are preserved in the archive, and can be restored on +extraction. +.PP +\&\s-1GNU\s0 \fBar\fR can maintain archives whose members have names of any +length; however, depending on how \fBar\fR is configured on your +system, a limit on member-name length may be imposed for compatibility +with archive formats maintained with other tools. If it exists, the +limit is often 15 characters (typical of formats related to a.out) or 16 +characters (typical of formats related to coff). +.PP +\&\fBar\fR is considered a binary utility because archives of this sort +are most often used as \fIlibraries\fR holding commonly needed +subroutines. +.PP +\&\fBar\fR creates an index to the symbols defined in relocatable +object modules in the archive when you specify the modifier \fBs\fR. +Once created, this index is updated in the archive whenever \fBar\fR +makes a change to its contents (save for the \fBq\fR update operation). +An archive with such an index speeds up linking to the library, and +allows routines in the library to call each other without regard to +their placement in the archive. +.PP +You may use \fBnm \-s\fR or \fBnm \-\-print\-armap\fR to list this index +table. If an archive lacks the table, another form of \fBar\fR called +\&\fBranlib\fR can be used to add just the table. +.PP +\&\s-1GNU\s0 \fBar\fR can optionally create a \fIthin\fR archive, +which contains a symbol index and references to the original copies +of the member files of the archives. Such an archive is useful +for building libraries for use within a local build, where the +relocatable objects are expected to remain available, and copying the +contents of each object would only waste time and space. Thin archives +are also \fIflattened\fR, so that adding one or more archives to a +thin archive will add the elements of the nested archive individually. +The paths to the elements of the archive are stored relative to the +archive itself. +.PP +\&\s-1GNU\s0 \fBar\fR is designed to be compatible with two different +facilities. You can control its activity using command-line options, +like the different varieties of \fBar\fR on Unix systems; or, if you +specify the single command-line option \fB\-M\fR, you can control it +with a script supplied via standard input, like the \s-1MRI\s0 \*(L"librarian\*(R" +program. +.SH "OPTIONS" +.IX Header "OPTIONS" +\&\s-1GNU\s0 \fBar\fR allows you to mix the operation code \fIp\fR and modifier +flags \fImod\fR in any order, within the first command-line argument. +.PP +If you wish, you may begin the first command-line argument with a +dash. +.PP +The \fIp\fR keyletter specifies what operation to execute; it may be +any of the following, but you must specify only one of them: +.IP "\fBd\fR" 4 +.IX Item "d" +\&\fIDelete\fR modules from the archive. Specify the names of modules to +be deleted as \fImember\fR...; the archive is untouched if you +specify no files to delete. +.Sp +If you specify the \fBv\fR modifier, \fBar\fR lists each module +as it is deleted. +.IP "\fBm\fR" 4 +.IX Item "m" +Use this operation to \fImove\fR members in an archive. +.Sp +The ordering of members in an archive can make a difference in how +programs are linked using the library, if a symbol is defined in more +than one member. +.Sp +If no modifiers are used with \f(CW\*(C`m\*(C'\fR, any members you name in the +\&\fImember\fR arguments are moved to the \fIend\fR of the archive; +you can use the \fBa\fR, \fBb\fR, or \fBi\fR modifiers to move them to a +specified place instead. +.IP "\fBp\fR" 4 +.IX Item "p" +\&\fIPrint\fR the specified members of the archive, to the standard +output file. If the \fBv\fR modifier is specified, show the member +name before copying its contents to standard output. +.Sp +If you specify no \fImember\fR arguments, all the files in the archive are +printed. +.IP "\fBq\fR" 4 +.IX Item "q" +\&\fIQuick append\fR; Historically, add the files \fImember\fR... to the end of +\&\fIarchive\fR, without checking for replacement. +.Sp +The modifiers \fBa\fR, \fBb\fR, and \fBi\fR do \fInot\fR affect this +operation; new members are always placed at the end of the archive. +.Sp +The modifier \fBv\fR makes \fBar\fR list each file as it is appended. +.Sp +Since the point of this operation is speed, the archive's symbol table +index is not updated, even if it already existed; you can use \fBar s\fR or +\&\fBranlib\fR explicitly to update the symbol table index. +.Sp +However, too many different systems assume quick append rebuilds the +index, so \s-1GNU\s0 \fBar\fR implements \fBq\fR as a synonym for \fBr\fR. +.IP "\fBr\fR" 4 +.IX Item "r" +Insert the files \fImember\fR... into \fIarchive\fR (with +\&\fIreplacement\fR). This operation differs from \fBq\fR in that any +previously existing members are deleted if their names match those being +added. +.Sp +If one of the files named in \fImember\fR... does not exist, \fBar\fR +displays an error message, and leaves undisturbed any existing members +of the archive matching that name. +.Sp +By default, new members are added at the end of the file; but you may +use one of the modifiers \fBa\fR, \fBb\fR, or \fBi\fR to request +placement relative to some existing member. +.Sp +The modifier \fBv\fR used with this operation elicits a line of +output for each file inserted, along with one of the letters \fBa\fR or +\&\fBr\fR to indicate whether the file was appended (no old member +deleted) or replaced. +.IP "\fBt\fR" 4 +.IX Item "t" +Display a \fItable\fR listing the contents of \fIarchive\fR, or those +of the files listed in \fImember\fR... that are present in the +archive. Normally only the member name is shown; if you also want to +see the modes (permissions), timestamp, owner, group, and size, you can +request that by also specifying the \fBv\fR modifier. +.Sp +If you do not specify a \fImember\fR, all files in the archive +are listed. +.Sp +If there is more than one file with the same name (say, \fBfie\fR) in +an archive (say \fBb.a\fR), \fBar t b.a fie\fR lists only the +first instance; to see them all, you must ask for a complete +listing\-\-\-in our example, \fBar t b.a\fR. +.IP "\fBx\fR" 4 +.IX Item "x" +\&\fIExtract\fR members (named \fImember\fR) from the archive. You can +use the \fBv\fR modifier with this operation, to request that +\&\fBar\fR list each name as it extracts it. +.Sp +If you do not specify a \fImember\fR, all files in the archive +are extracted. +.Sp +Files cannot be extracted from a thin archive. +.PP +A number of modifiers (\fImod\fR) may immediately follow the \fIp\fR +keyletter, to specify variations on an operation's behavior: +.IP "\fBa\fR" 4 +.IX Item "a" +Add new files \fIafter\fR an existing member of the +archive. If you use the modifier \fBa\fR, the name of an existing archive +member must be present as the \fIrelpos\fR argument, before the +\&\fIarchive\fR specification. +.IP "\fBb\fR" 4 +.IX Item "b" +Add new files \fIbefore\fR an existing member of the +archive. If you use the modifier \fBb\fR, the name of an existing archive +member must be present as the \fIrelpos\fR argument, before the +\&\fIarchive\fR specification. (same as \fBi\fR). +.IP "\fBc\fR" 4 +.IX Item "c" +\&\fICreate\fR the archive. The specified \fIarchive\fR is always +created if it did not exist, when you request an update. But a warning is +issued unless you specify in advance that you expect to create it, by +using this modifier. +.IP "\fBD\fR" 4 +.IX Item "D" +Operate in \fIdeterministic\fR mode. When adding files and the archive +index use zero for UIDs, GIDs, timestamps, and use consistent file modes +for all files. When this option is used, if \fBar\fR is used with +identical options and identical input files, multiple runs will create +identical output files regardless of the input files' owners, groups, +file modes, or modification times. +.IP "\fBf\fR" 4 +.IX Item "f" +Truncate names in the archive. \s-1GNU\s0 \fBar\fR will normally permit file +names of any length. This will cause it to create archives which are +not compatible with the native \fBar\fR program on some systems. If +this is a concern, the \fBf\fR modifier may be used to truncate file +names when putting them in the archive. +.IP "\fBi\fR" 4 +.IX Item "i" +Insert new files \fIbefore\fR an existing member of the +archive. If you use the modifier \fBi\fR, the name of an existing archive +member must be present as the \fIrelpos\fR argument, before the +\&\fIarchive\fR specification. (same as \fBb\fR). +.IP "\fBl\fR" 4 +.IX Item "l" +This modifier is accepted but not used. +.IP "\fBN\fR" 4 +.IX Item "N" +Uses the \fIcount\fR parameter. This is used if there are multiple +entries in the archive with the same name. Extract or delete instance +\&\fIcount\fR of the given name from the archive. +.IP "\fBo\fR" 4 +.IX Item "o" +Preserve the \fIoriginal\fR dates of members when extracting them. If +you do not specify this modifier, files extracted from the archive +are stamped with the time of extraction. +.IP "\fBP\fR" 4 +.IX Item "P" +Use the full path name when matching names in the archive. \s-1GNU\s0 +\&\fBar\fR can not create an archive with a full path name (such archives +are not \s-1POSIX\s0 complaint), but other archive creators can. This option +will cause \s-1GNU\s0 \fBar\fR to match file names using a complete path +name, which can be convenient when extracting a single file from an +archive created by another tool. +.IP "\fBs\fR" 4 +.IX Item "s" +Write an object-file index into the archive, or update an existing one, +even if no other change is made to the archive. You may use this modifier +flag either with any operation, or alone. Running \fBar s\fR on an +archive is equivalent to running \fBranlib\fR on it. +.IP "\fBS\fR" 4 +.IX Item "S" +Do not generate an archive symbol table. This can speed up building a +large library in several steps. The resulting archive can not be used +with the linker. In order to build a symbol table, you must omit the +\&\fBS\fR modifier on the last execution of \fBar\fR, or you must run +\&\fBranlib\fR on the archive. +.IP "\fBT\fR" 4 +.IX Item "T" +Make the specified \fIarchive\fR a \fIthin\fR archive. If it already +exists and is a regular archive, the existing members must be present +in the same directory as \fIarchive\fR. +.IP "\fBu\fR" 4 +.IX Item "u" +Normally, \fBar r\fR... inserts all files +listed into the archive. If you would like to insert \fIonly\fR those +of the files you list that are newer than existing members of the same +names, use this modifier. The \fBu\fR modifier is allowed only for the +operation \fBr\fR (replace). In particular, the combination \fBqu\fR is +not allowed, since checking the timestamps would lose any speed +advantage from the operation \fBq\fR. +.IP "\fBv\fR" 4 +.IX Item "v" +This modifier requests the \fIverbose\fR version of an operation. Many +operations display additional information, such as filenames processed, +when the modifier \fBv\fR is appended. +.IP "\fBV\fR" 4 +.IX Item "V" +This modifier shows the version number of \fBar\fR. +.PP +\&\fBar\fR ignores an initial option spelt \fB\-X32_64\fR, for +compatibility with \s-1AIX\s0. The behaviour produced by this option is the +default for \s-1GNU\s0 \fBar\fR. \fBar\fR does not support any of the other +\&\fB\-X\fR options; in particular, it does not support \fB\-X32\fR +which is the default for \s-1AIX\s0 \fBar\fR. +.PP +The optional command line switch \fB\-\-plugin\fR \fIname\fR causes +\&\fBar\fR to load the plugin called \fIname\fR which adds support +for more file formats. This option is only available if the toolchain +has been built with plugin support enabled. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fInm\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/binutils.info b/binutils/doc/binutils.info new file mode 100644 index 0000000..bc00022 --- /dev/null +++ b/binutils/doc/binutils.info @@ -0,0 +1,4493 @@ +This is binutils.info, produced by makeinfo version 4.8 from +binutils.texi. + + Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free +Software Foundation, Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with no Front-Cover Texts, and with no Back-Cover +Texts. A copy of the license is included in the section entitled "GNU +Free Documentation License". + +INFO-DIR-SECTION Software development +START-INFO-DIR-ENTRY +* Binutils: (binutils). The GNU binary utilities. +END-INFO-DIR-ENTRY + +INFO-DIR-SECTION Individual utilities +START-INFO-DIR-ENTRY +* addr2line: (binutils)addr2line. Convert addresses to file and line. +* ar: (binutils)ar. Create, modify, and extract from archives. +* c++filt: (binutils)c++filt. Filter to demangle encoded C++ symbols. +* cxxfilt: (binutils)c++filt. MS-DOS name for c++filt. +* dlltool: (binutils)dlltool. Create files needed to build and use DLLs. +* nlmconv: (binutils)nlmconv. Converts object code into an NLM. +* nm: (binutils)nm. List symbols from object files. +* objcopy: (binutils)objcopy. Copy and translate object files. +* objdump: (binutils)objdump. Display information from object files. +* ranlib: (binutils)ranlib. Generate index to archive contents. +* readelf: (binutils)readelf. Display the contents of ELF format files. +* size: (binutils)size. List section sizes and total size. +* strings: (binutils)strings. List printable strings from files. +* strip: (binutils)strip. Discard symbols. +* windmc: (binutils)windmc. Generator for Windows message resources. +* windres: (binutils)windres. Manipulate Windows resources. +END-INFO-DIR-ENTRY + + +File: binutils.info, Node: Top, Next: ar, Up: (dir) + +Introduction +************ + +This brief manual contains documentation for the GNU binary utilities +(GNU Binutils) version 2.20: + + This document is distributed under the terms of the GNU Free +Documentation License version 1.3. A copy of the license is included +in the section entitled "GNU Free Documentation License". + +* Menu: + +* ar:: Create, modify, and extract from archives +* nm:: List symbols from object files +* objcopy:: Copy and translate object files +* objdump:: Display information from object files +* ranlib:: Generate index to archive contents +* readelf:: Display the contents of ELF format files +* size:: List section sizes and total size +* strings:: List printable strings from files +* strip:: Discard symbols +* c++filt:: Filter to demangle encoded C++ symbols +* cxxfilt: c++filt. MS-DOS name for c++filt +* addr2line:: Convert addresses to file and line +* nlmconv:: Converts object code into an NLM +* windres:: Manipulate Windows resources +* windmc:: Generator for Windows message resources +* dlltool:: Create files needed to build and use DLLs +* Common Options:: Command-line options for all utilities +* Selecting the Target System:: How these utilities determine the target +* Reporting Bugs:: Reporting Bugs +* GNU Free Documentation License:: GNU Free Documentation License +* Binutils Index:: Binutils Index + + +File: binutils.info, Node: ar, Next: nm, Prev: Top, Up: Top + +1 ar +**** + + ar [`--plugin' NAME] [-]P[MOD [RELPOS] [COUNT]] ARCHIVE [MEMBER...] + ar -M [ <mri-script ] + + The GNU `ar' program creates, modifies, and extracts from archives. +An "archive" is a single file holding a collection of other files in a +structure that makes it possible to retrieve the original individual +files (called "members" of the archive). + + The original files' contents, mode (permissions), timestamp, owner, +and group are preserved in the archive, and can be restored on +extraction. + + GNU `ar' can maintain archives whose members have names of any +length; however, depending on how `ar' is configured on your system, a +limit on member-name length may be imposed for compatibility with +archive formats maintained with other tools. If it exists, the limit +is often 15 characters (typical of formats related to a.out) or 16 +characters (typical of formats related to coff). + + `ar' is considered a binary utility because archives of this sort +are most often used as "libraries" holding commonly needed subroutines. + + `ar' creates an index to the symbols defined in relocatable object +modules in the archive when you specify the modifier `s'. Once +created, this index is updated in the archive whenever `ar' makes a +change to its contents (save for the `q' update operation). An archive +with such an index speeds up linking to the library, and allows +routines in the library to call each other without regard to their +placement in the archive. + + You may use `nm -s' or `nm --print-armap' to list this index table. +If an archive lacks the table, another form of `ar' called `ranlib' can +be used to add just the table. + + GNU `ar' can optionally create a _thin_ archive, which contains a +symbol index and references to the original copies of the member files +of the archives. Such an archive is useful for building libraries for +use within a local build, where the relocatable objects are expected to +remain available, and copying the contents of each object would only +waste time and space. Thin archives are also _flattened_, so that +adding one or more archives to a thin archive will add the elements of +the nested archive individually. The paths to the elements of the +archive are stored relative to the archive itself. + + GNU `ar' is designed to be compatible with two different facilities. +You can control its activity using command-line options, like the +different varieties of `ar' on Unix systems; or, if you specify the +single command-line option `-M', you can control it with a script +supplied via standard input, like the MRI "librarian" program. + +* Menu: + +* ar cmdline:: Controlling `ar' on the command line +* ar scripts:: Controlling `ar' with a script + + +File: binutils.info, Node: ar cmdline, Next: ar scripts, Up: ar + +1.1 Controlling `ar' on the Command Line +======================================== + + ar [`--plugin' NAME] [`-X32_64'] [`-']P[MOD [RELPOS] [COUNT]] ARCHIVE [MEMBER...] + + When you use `ar' in the Unix style, `ar' insists on at least two +arguments to execute: one keyletter specifying the _operation_ +(optionally accompanied by other keyletters specifying _modifiers_), +and the archive name to act on. + + Most operations can also accept further MEMBER arguments, specifying +particular files to operate on. + + GNU `ar' allows you to mix the operation code P and modifier flags +MOD in any order, within the first command-line argument. + + If you wish, you may begin the first command-line argument with a +dash. + + The P keyletter specifies what operation to execute; it may be any +of the following, but you must specify only one of them: + +`d' + _Delete_ modules from the archive. Specify the names of modules to + be deleted as MEMBER...; the archive is untouched if you specify + no files to delete. + + If you specify the `v' modifier, `ar' lists each module as it is + deleted. + +`m' + Use this operation to _move_ members in an archive. + + The ordering of members in an archive can make a difference in how + programs are linked using the library, if a symbol is defined in + more than one member. + + If no modifiers are used with `m', any members you name in the + MEMBER arguments are moved to the _end_ of the archive; you can + use the `a', `b', or `i' modifiers to move them to a specified + place instead. + +`p' + _Print_ the specified members of the archive, to the standard + output file. If the `v' modifier is specified, show the member + name before copying its contents to standard output. + + If you specify no MEMBER arguments, all the files in the archive + are printed. + +`q' + _Quick append_; Historically, add the files MEMBER... to the end of + ARCHIVE, without checking for replacement. + + The modifiers `a', `b', and `i' do _not_ affect this operation; + new members are always placed at the end of the archive. + + The modifier `v' makes `ar' list each file as it is appended. + + Since the point of this operation is speed, the archive's symbol + table index is not updated, even if it already existed; you can + use `ar s' or `ranlib' explicitly to update the symbol table index. + + However, too many different systems assume quick append rebuilds + the index, so GNU `ar' implements `q' as a synonym for `r'. + +`r' + Insert the files MEMBER... into ARCHIVE (with _replacement_). This + operation differs from `q' in that any previously existing members + are deleted if their names match those being added. + + If one of the files named in MEMBER... does not exist, `ar' + displays an error message, and leaves undisturbed any existing + members of the archive matching that name. + + By default, new members are added at the end of the file; but you + may use one of the modifiers `a', `b', or `i' to request placement + relative to some existing member. + + The modifier `v' used with this operation elicits a line of output + for each file inserted, along with one of the letters `a' or `r' + to indicate whether the file was appended (no old member deleted) + or replaced. + +`t' + Display a _table_ listing the contents of ARCHIVE, or those of the + files listed in MEMBER... that are present in the archive. + Normally only the member name is shown; if you also want to see + the modes (permissions), timestamp, owner, group, and size, you can + request that by also specifying the `v' modifier. + + If you do not specify a MEMBER, all files in the archive are + listed. + + If there is more than one file with the same name (say, `fie') in + an archive (say `b.a'), `ar t b.a fie' lists only the first + instance; to see them all, you must ask for a complete listing--in + our example, `ar t b.a'. + +`x' + _Extract_ members (named MEMBER) from the archive. You can use + the `v' modifier with this operation, to request that `ar' list + each name as it extracts it. + + If you do not specify a MEMBER, all files in the archive are + extracted. + + Files cannot be extracted from a thin archive. + + + A number of modifiers (MOD) may immediately follow the P keyletter, +to specify variations on an operation's behavior: + +`a' + Add new files _after_ an existing member of the archive. If you + use the modifier `a', the name of an existing archive member must + be present as the RELPOS argument, before the ARCHIVE + specification. + +`b' + Add new files _before_ an existing member of the archive. If you + use the modifier `b', the name of an existing archive member must + be present as the RELPOS argument, before the ARCHIVE + specification. (same as `i'). + +`c' + _Create_ the archive. The specified ARCHIVE is always created if + it did not exist, when you request an update. But a warning is + issued unless you specify in advance that you expect to create it, + by using this modifier. + +`D' + Operate in _deterministic_ mode. When adding files and the archive + index use zero for UIDs, GIDs, timestamps, and use consistent file + modes for all files. When this option is used, if `ar' is used + with identical options and identical input files, multiple runs + will create identical output files regardless of the input files' + owners, groups, file modes, or modification times. + +`f' + Truncate names in the archive. GNU `ar' will normally permit file + names of any length. This will cause it to create archives which + are not compatible with the native `ar' program on some systems. + If this is a concern, the `f' modifier may be used to truncate file + names when putting them in the archive. + +`i' + Insert new files _before_ an existing member of the archive. If + you use the modifier `i', the name of an existing archive member + must be present as the RELPOS argument, before the ARCHIVE + specification. (same as `b'). + +`l' + This modifier is accepted but not used. + +`N' + Uses the COUNT parameter. This is used if there are multiple + entries in the archive with the same name. Extract or delete + instance COUNT of the given name from the archive. + +`o' + Preserve the _original_ dates of members when extracting them. If + you do not specify this modifier, files extracted from the archive + are stamped with the time of extraction. + +`P' + Use the full path name when matching names in the archive. GNU + `ar' can not create an archive with a full path name (such archives + are not POSIX complaint), but other archive creators can. This + option will cause GNU `ar' to match file names using a complete + path name, which can be convenient when extracting a single file + from an archive created by another tool. + +`s' + Write an object-file index into the archive, or update an existing + one, even if no other change is made to the archive. You may use + this modifier flag either with any operation, or alone. Running + `ar s' on an archive is equivalent to running `ranlib' on it. + +`S' + Do not generate an archive symbol table. This can speed up + building a large library in several steps. The resulting archive + can not be used with the linker. In order to build a symbol + table, you must omit the `S' modifier on the last execution of + `ar', or you must run `ranlib' on the archive. + +`T' + Make the specified ARCHIVE a _thin_ archive. If it already exists + and is a regular archive, the existing members must be present in + the same directory as ARCHIVE. + +`u' + Normally, `ar r'... inserts all files listed into the archive. If + you would like to insert _only_ those of the files you list that + are newer than existing members of the same names, use this + modifier. The `u' modifier is allowed only for the operation `r' + (replace). In particular, the combination `qu' is not allowed, + since checking the timestamps would lose any speed advantage from + the operation `q'. + +`v' + This modifier requests the _verbose_ version of an operation. Many + operations display additional information, such as filenames + processed, when the modifier `v' is appended. + +`V' + This modifier shows the version number of `ar'. + + `ar' ignores an initial option spelt `-X32_64', for compatibility +with AIX. The behaviour produced by this option is the default for GNU +`ar'. `ar' does not support any of the other `-X' options; in +particular, it does not support `-X32' which is the default for AIX +`ar'. + + The optional command line switch `--plugin' NAME causes `ar' to load +the plugin called NAME which adds support for more file formats. This +option is only available if the toolchain has been built with plugin +support enabled. + + +File: binutils.info, Node: ar scripts, Prev: ar cmdline, Up: ar + +1.2 Controlling `ar' with a Script +================================== + + ar -M [ <SCRIPT ] + + If you use the single command-line option `-M' with `ar', you can +control its operation with a rudimentary command language. This form +of `ar' operates interactively if standard input is coming directly +from a terminal. During interactive use, `ar' prompts for input (the +prompt is `AR >'), and continues executing even after errors. If you +redirect standard input to a script file, no prompts are issued, and +`ar' abandons execution (with a nonzero exit code) on any error. + + The `ar' command language is _not_ designed to be equivalent to the +command-line options; in fact, it provides somewhat less control over +archives. The only purpose of the command language is to ease the +transition to GNU `ar' for developers who already have scripts written +for the MRI "librarian" program. + + The syntax for the `ar' command language is straightforward: + * commands are recognized in upper or lower case; for example, `LIST' + is the same as `list'. In the following descriptions, commands are + shown in upper case for clarity. + + * a single command may appear on each line; it is the first word on + the line. + + * empty lines are allowed, and have no effect. + + * comments are allowed; text after either of the characters `*' or + `;' is ignored. + + * Whenever you use a list of names as part of the argument to an `ar' + command, you can separate the individual names with either commas + or blanks. Commas are shown in the explanations below, for + clarity. + + * `+' is used as a line continuation character; if `+' appears at + the end of a line, the text on the following line is considered + part of the current command. + + Here are the commands you can use in `ar' scripts, or when using +`ar' interactively. Three of them have special significance: + + `OPEN' or `CREATE' specify a "current archive", which is a temporary +file required for most of the other commands. + + `SAVE' commits the changes so far specified by the script. Prior to +`SAVE', commands affect only the temporary copy of the current archive. + +`ADDLIB ARCHIVE' +`ADDLIB ARCHIVE (MODULE, MODULE, ... MODULE)' + Add all the contents of ARCHIVE (or, if specified, each named + MODULE from ARCHIVE) to the current archive. + + Requires prior use of `OPEN' or `CREATE'. + +`ADDMOD MEMBER, MEMBER, ... MEMBER' + Add each named MEMBER as a module in the current archive. + + Requires prior use of `OPEN' or `CREATE'. + +`CLEAR' + Discard the contents of the current archive, canceling the effect + of any operations since the last `SAVE'. May be executed (with no + effect) even if no current archive is specified. + +`CREATE ARCHIVE' + Creates an archive, and makes it the current archive (required for + many other commands). The new archive is created with a temporary + name; it is not actually saved as ARCHIVE until you use `SAVE'. + You can overwrite existing archives; similarly, the contents of any + existing file named ARCHIVE will not be destroyed until `SAVE'. + +`DELETE MODULE, MODULE, ... MODULE' + Delete each listed MODULE from the current archive; equivalent to + `ar -d ARCHIVE MODULE ... MODULE'. + + Requires prior use of `OPEN' or `CREATE'. + +`DIRECTORY ARCHIVE (MODULE, ... MODULE)' +`DIRECTORY ARCHIVE (MODULE, ... MODULE) OUTPUTFILE' + List each named MODULE present in ARCHIVE. The separate command + `VERBOSE' specifies the form of the output: when verbose output is + off, output is like that of `ar -t ARCHIVE MODULE...'. When + verbose output is on, the listing is like `ar -tv ARCHIVE + MODULE...'. + + Output normally goes to the standard output stream; however, if you + specify OUTPUTFILE as a final argument, `ar' directs the output to + that file. + +`END' + Exit from `ar', with a `0' exit code to indicate successful + completion. This command does not save the output file; if you + have changed the current archive since the last `SAVE' command, + those changes are lost. + +`EXTRACT MODULE, MODULE, ... MODULE' + Extract each named MODULE from the current archive, writing them + into the current directory as separate files. Equivalent to `ar -x + ARCHIVE MODULE...'. + + Requires prior use of `OPEN' or `CREATE'. + +`LIST' + Display full contents of the current archive, in "verbose" style + regardless of the state of `VERBOSE'. The effect is like `ar tv + ARCHIVE'. (This single command is a GNU `ar' enhancement, rather + than present for MRI compatibility.) + + Requires prior use of `OPEN' or `CREATE'. + +`OPEN ARCHIVE' + Opens an existing archive for use as the current archive (required + for many other commands). Any changes as the result of subsequent + commands will not actually affect ARCHIVE until you next use + `SAVE'. + +`REPLACE MODULE, MODULE, ... MODULE' + In the current archive, replace each existing MODULE (named in the + `REPLACE' arguments) from files in the current working directory. + To execute this command without errors, both the file, and the + module in the current archive, must exist. + + Requires prior use of `OPEN' or `CREATE'. + +`VERBOSE' + Toggle an internal flag governing the output from `DIRECTORY'. + When the flag is on, `DIRECTORY' output matches output from `ar + -tv '.... + +`SAVE' + Commit your changes to the current archive, and actually save it + as a file with the name specified in the last `CREATE' or `OPEN' + command. + + Requires prior use of `OPEN' or `CREATE'. + + + +File: binutils.info, Node: nm, Next: objcopy, Prev: ar, Up: Top + +2 nm +**** + + nm [`-a'|`--debug-syms'] + [`-g'|`--extern-only'][`--plugin' NAME] + [`-B'] [`-C'|`--demangle'[=STYLE]] [`-D'|`--dynamic'] + [`-S'|`--print-size'] [`-s'|`--print-armap'] + [`-A'|`-o'|`--print-file-name'][`--special-syms'] + [`-n'|`-v'|`--numeric-sort'] [`-p'|`--no-sort'] + [`-r'|`--reverse-sort'] [`--size-sort'] [`-u'|`--undefined-only'] + [`-t' RADIX|`--radix='RADIX] [`-P'|`--portability'] + [`--target='BFDNAME] [`-f'FORMAT|`--format='FORMAT] + [`--defined-only'] [`-l'|`--line-numbers'] [`--no-demangle'] + [`-V'|`--version'] [`-X 32_64'] [`--help'] [OBJFILE...] + + GNU `nm' lists the symbols from object files OBJFILE.... If no +object files are listed as arguments, `nm' assumes the file `a.out'. + + For each symbol, `nm' shows: + + * The symbol value, in the radix selected by options (see below), or + hexadecimal by default. + + * The symbol type. At least the following types are used; others + are, as well, depending on the object file format. If lowercase, + the symbol is local; if uppercase, the symbol is global (external). + + `A' + The symbol's value is absolute, and will not be changed by + further linking. + + `B' + `b' + The symbol is in the uninitialized data section (known as + BSS). + + `C' + The symbol is common. Common symbols are uninitialized data. + When linking, multiple common symbols may appear with the + same name. If the symbol is defined anywhere, the common + symbols are treated as undefined references. For more + details on common symbols, see the discussion of -warn-common + in *Note Linker options: (ld.info)Options. + + `D' + `d' + The symbol is in the initialized data section. + + `G' + `g' + The symbol is in an initialized data section for small + objects. Some object file formats permit more efficient + access to small data objects, such as a global int variable + as opposed to a large global array. + + `i' + For PE format files this indicates that the symbol is in a + section specific to the implementation of DLLs. For ELF + format files this indicates that the symbol is an indirect + function. This is a GNU extension to the standard set of ELF + symbol types. It indicates a symbol which if referenced by a + relocation does not evaluate to its address, but instead must + be invoked at runtime. The runtime execution will then + return the value to be used in the relocation. + + `N' + The symbol is a debugging symbol. + + `p' + The symbols is in a stack unwind section. + + `R' + `r' + The symbol is in a read only data section. + + `S' + `s' + The symbol is in an uninitialized data section for small + objects. + + `T' + `t' + The symbol is in the text (code) section. + + `U' + The symbol is undefined. + + `u' + The symbol is a unique global symbol. This is a GNU + extension to the standard set of ELF symbol bindings. For + such a symbol the dynamic linker will make sure that in the + entire process there is just one symbol with this name and + type in use. + + `V' + `v' + The symbol is a weak object. When a weak defined symbol is + linked with a normal defined symbol, the normal defined + symbol is used with no error. When a weak undefined symbol + is linked and the symbol is not defined, the value of the + weak symbol becomes zero with no error. On some systems, + uppercase indicates that a default value has been specified. + + `W' + `w' + The symbol is a weak symbol that has not been specifically + tagged as a weak object symbol. When a weak defined symbol + is linked with a normal defined symbol, the normal defined + symbol is used with no error. When a weak undefined symbol + is linked and the symbol is not defined, the value of the + symbol is determined in a system-specific manner without + error. On some systems, uppercase indicates that a default + value has been specified. + + `-' + The symbol is a stabs symbol in an a.out object file. In + this case, the next values printed are the stabs other field, + the stabs desc field, and the stab type. Stabs symbols are + used to hold debugging information. For more information, + see *Note Stabs: (stabs.info)Top. + + `?' + The symbol type is unknown, or object file format specific. + + * The symbol name. + + The long and short forms of options, shown here as alternatives, are +equivalent. + +`-A' +`-o' +`--print-file-name' + Precede each symbol by the name of the input file (or archive + member) in which it was found, rather than identifying the input + file once only, before all of its symbols. + +`-a' +`--debug-syms' + Display all symbols, even debugger-only symbols; normally these + are not listed. + +`-B' + The same as `--format=bsd' (for compatibility with the MIPS `nm'). + +`-C' +`--demangle[=STYLE]' + Decode ("demangle") low-level symbol names into user-level names. + Besides removing any initial underscore prepended by the system, + this makes C++ function names readable. Different compilers have + different mangling styles. The optional demangling style argument + can be used to choose an appropriate demangling style for your + compiler. *Note c++filt::, for more information on demangling. + +`--no-demangle' + Do not demangle low-level symbol names. This is the default. + +`-D' +`--dynamic' + Display the dynamic symbols rather than the normal symbols. This + is only meaningful for dynamic objects, such as certain types of + shared libraries. + +`-f FORMAT' +`--format=FORMAT' + Use the output format FORMAT, which can be `bsd', `sysv', or + `posix'. The default is `bsd'. Only the first character of + FORMAT is significant; it can be either upper or lower case. + +`-g' +`--extern-only' + Display only external symbols. + +`--plugin NAME' + Load the plugin called NAME to add support for extra target types. + This option is only available if the toolchain has been built + with plugin support enabled. + +`-l' +`--line-numbers' + For each symbol, use debugging information to try to find a + filename and line number. For a defined symbol, look for the line + number of the address of the symbol. For an undefined symbol, + look for the line number of a relocation entry which refers to the + symbol. If line number information can be found, print it after + the other symbol information. + +`-n' +`-v' +`--numeric-sort' + Sort symbols numerically by their addresses, rather than + alphabetically by their names. + +`-p' +`--no-sort' + Do not bother to sort the symbols in any order; print them in the + order encountered. + +`-P' +`--portability' + Use the POSIX.2 standard output format instead of the default + format. Equivalent to `-f posix'. + +`-S' +`--print-size' + Print both value and size of defined symbols for the `bsd' output + style. This option has no effect for object formats that do not + record symbol sizes, unless `--size-sort' is also used in which + case a calculated size is displayed. + +`-s' +`--print-armap' + When listing symbols from archive members, include the index: a + mapping (stored in the archive by `ar' or `ranlib') of which + modules contain definitions for which names. + +`-r' +`--reverse-sort' + Reverse the order of the sort (whether numeric or alphabetic); let + the last come first. + +`--size-sort' + Sort symbols by size. The size is computed as the difference + between the value of the symbol and the value of the symbol with + the next higher value. If the `bsd' output format is used the + size of the symbol is printed, rather than the value, and `-S' + must be used in order both size and value to be printed. + +`--special-syms' + Display symbols which have a target-specific special meaning. + These symbols are usually used by the target for some special + processing and are not normally helpful when included included in + the normal symbol lists. For example for ARM targets this option + would skip the mapping symbols used to mark transitions between + ARM code, THUMB code and data. + +`-t RADIX' +`--radix=RADIX' + Use RADIX as the radix for printing the symbol values. It must be + `d' for decimal, `o' for octal, or `x' for hexadecimal. + +`--target=BFDNAME' + Specify an object code format other than your system's default + format. *Note Target Selection::, for more information. + +`-u' +`--undefined-only' + Display only undefined symbols (those external to each object + file). + +`--defined-only' + Display only defined symbols for each object file. + +`-V' +`--version' + Show the version number of `nm' and exit. + +`-X' + This option is ignored for compatibility with the AIX version of + `nm'. It takes one parameter which must be the string `32_64'. + The default mode of AIX `nm' corresponds to `-X 32', which is not + supported by GNU `nm'. + +`--help' + Show a summary of the options to `nm' and exit. + + +File: binutils.info, Node: objcopy, Next: objdump, Prev: nm, Up: Top + +3 objcopy +********* + + objcopy [`-F' BFDNAME|`--target='BFDNAME] + [`-I' BFDNAME|`--input-target='BFDNAME] + [`-O' BFDNAME|`--output-target='BFDNAME] + [`-B' BFDARCH|`--binary-architecture='BFDARCH] + [`-S'|`--strip-all'] + [`-g'|`--strip-debug'] + [`-K' SYMBOLNAME|`--keep-symbol='SYMBOLNAME] + [`-N' SYMBOLNAME|`--strip-symbol='SYMBOLNAME] + [`--strip-unneeded-symbol='SYMBOLNAME] + [`-G' SYMBOLNAME|`--keep-global-symbol='SYMBOLNAME] + [`--localize-hidden'] + [`-L' SYMBOLNAME|`--localize-symbol='SYMBOLNAME] + [`--globalize-symbol='SYMBOLNAME] + [`-W' SYMBOLNAME|`--weaken-symbol='SYMBOLNAME] + [`-w'|`--wildcard'] + [`-x'|`--discard-all'] + [`-X'|`--discard-locals'] + [`-b' BYTE|`--byte='BYTE] + [`-i' INTERLEAVE|`--interleave='INTERLEAVE] + [`-j' SECTIONNAME|`--only-section='SECTIONNAME] + [`-R' SECTIONNAME|`--remove-section='SECTIONNAME] + [`-p'|`--preserve-dates'] + [`--debugging'] + [`--gap-fill='VAL] + [`--pad-to='ADDRESS] + [`--set-start='VAL] + [`--adjust-start='INCR] + [`--change-addresses='INCR] + [`--change-section-address' SECTION{=,+,-}VAL] + [`--change-section-lma' SECTION{=,+,-}VAL] + [`--change-section-vma' SECTION{=,+,-}VAL] + [`--change-warnings'] [`--no-change-warnings'] + [`--set-section-flags' SECTION=FLAGS] + [`--add-section' SECTIONNAME=FILENAME] + [`--rename-section' OLDNAME=NEWNAME[,FLAGS]] + [`--long-section-names' {enable,disable,keep}] + [`--change-leading-char'] [`--remove-leading-char'] + [`--reverse-bytes='NUM] + [`--srec-len='IVAL] [`--srec-forceS3'] + [`--redefine-sym' OLD=NEW] + [`--redefine-syms='FILENAME] + [`--weaken'] + [`--keep-symbols='FILENAME] + [`--strip-symbols='FILENAME] + [`--strip-unneeded-symbols='FILENAME] + [`--keep-global-symbols='FILENAME] + [`--localize-symbols='FILENAME] + [`--globalize-symbols='FILENAME] + [`--weaken-symbols='FILENAME] + [`--alt-machine-code='INDEX] + [`--prefix-symbols='STRING] + [`--prefix-sections='STRING] + [`--prefix-alloc-sections='STRING] + [`--add-gnu-debuglink='PATH-TO-FILE] + [`--keep-file-symbols'] + [`--only-keep-debug'] + [`--extract-symbol'] + [`--writable-text'] + [`--readonly-text'] + [`--pure'] + [`--impure'] + [`--file-alignment='NUM] + [`--heap='SIZE] + [`--image-base='ADDRESS] + [`--section-alignment='NUM] + [`--stack='SIZE] + [`--subsystem='WHICH:MAJOR.MINOR] + [`-v'|`--verbose'] + [`-V'|`--version'] + [`--help'] [`--info'] + INFILE [OUTFILE] + + The GNU `objcopy' utility copies the contents of an object file to +another. `objcopy' uses the GNU BFD Library to read and write the +object files. It can write the destination object file in a format +different from that of the source object file. The exact behavior of +`objcopy' is controlled by command-line options. Note that `objcopy' +should be able to copy a fully linked file between any two formats. +However, copying a relocatable object file between any two formats may +not work as expected. + + `objcopy' creates temporary files to do its translations and deletes +them afterward. `objcopy' uses BFD to do all its translation work; it +has access to all the formats described in BFD and thus is able to +recognize most formats without being told explicitly. *Note BFD: +(ld.info)BFD. + + `objcopy' can be used to generate S-records by using an output +target of `srec' (e.g., use `-O srec'). + + `objcopy' can be used to generate a raw binary file by using an +output target of `binary' (e.g., use `-O binary'). When `objcopy' +generates a raw binary file, it will essentially produce a memory dump +of the contents of the input object file. All symbols and relocation +information will be discarded. The memory dump will start at the load +address of the lowest section copied into the output file. + + When generating an S-record or a raw binary file, it may be helpful +to use `-S' to remove sections containing debugging information. In +some cases `-R' will be useful to remove sections which contain +information that is not needed by the binary file. + + Note--`objcopy' is not able to change the endianness of its input +files. If the input format has an endianness (some formats do not), +`objcopy' can only copy the inputs into file formats that have the same +endianness or which have no endianness (e.g., `srec'). (However, see +the `--reverse-bytes' option.) + +`INFILE' +`OUTFILE' + The input and output files, respectively. If you do not specify + OUTFILE, `objcopy' creates a temporary file and destructively + renames the result with the name of INFILE. + +`-I BFDNAME' +`--input-target=BFDNAME' + Consider the source file's object format to be BFDNAME, rather than + attempting to deduce it. *Note Target Selection::, for more + information. + +`-O BFDNAME' +`--output-target=BFDNAME' + Write the output file using the object format BFDNAME. *Note + Target Selection::, for more information. + +`-F BFDNAME' +`--target=BFDNAME' + Use BFDNAME as the object format for both the input and the output + file; i.e., simply transfer data from source to destination with no + translation. *Note Target Selection::, for more information. + +`-B BFDARCH' +`--binary-architecture=BFDARCH' + Useful when transforming a raw binary input file into an object + file. In this case the output architecture can be set to BFDARCH. + This option will be ignored if the input file has a known BFDARCH. + You can access this binary data inside a program by referencing + the special symbols that are created by the conversion process. + These symbols are called _binary_OBJFILE_start, + _binary_OBJFILE_end and _binary_OBJFILE_size. e.g. you can + transform a picture file into an object file and then access it in + your code using these symbols. + +`-j SECTIONNAME' +`--only-section=SECTIONNAME' + Copy only the named section from the input file to the output file. + This option may be given more than once. Note that using this + option inappropriately may make the output file unusable. + +`-R SECTIONNAME' +`--remove-section=SECTIONNAME' + Remove any section named SECTIONNAME from the output file. This + option may be given more than once. Note that using this option + inappropriately may make the output file unusable. + +`-S' +`--strip-all' + Do not copy relocation and symbol information from the source file. + +`-g' +`--strip-debug' + Do not copy debugging symbols or sections from the source file. + +`--strip-unneeded' + Strip all symbols that are not needed for relocation processing. + +`-K SYMBOLNAME' +`--keep-symbol=SYMBOLNAME' + When stripping symbols, keep symbol SYMBOLNAME even if it would + normally be stripped. This option may be given more than once. + +`-N SYMBOLNAME' +`--strip-symbol=SYMBOLNAME' + Do not copy symbol SYMBOLNAME from the source file. This option + may be given more than once. + +`--strip-unneeded-symbol=SYMBOLNAME' + Do not copy symbol SYMBOLNAME from the source file unless it is + needed by a relocation. This option may be given more than once. + +`-G SYMBOLNAME' +`--keep-global-symbol=SYMBOLNAME' + Keep only symbol SYMBOLNAME global. Make all other symbols local + to the file, so that they are not visible externally. This option + may be given more than once. + +`--localize-hidden' + In an ELF object, mark all symbols that have hidden or internal + visibility as local. This option applies on top of + symbol-specific localization options such as `-L'. + +`-L SYMBOLNAME' +`--localize-symbol=SYMBOLNAME' + Make symbol SYMBOLNAME local to the file, so that it is not + visible externally. This option may be given more than once. + +`-W SYMBOLNAME' +`--weaken-symbol=SYMBOLNAME' + Make symbol SYMBOLNAME weak. This option may be given more than + once. + +`--globalize-symbol=SYMBOLNAME' + Give symbol SYMBOLNAME global scoping so that it is visible + outside of the file in which it is defined. This option may be + given more than once. + +`-w' +`--wildcard' + Permit regular expressions in SYMBOLNAMEs used in other command + line options. The question mark (?), asterisk (*), backslash (\) + and square brackets ([]) operators can be used anywhere in the + symbol name. If the first character of the symbol name is the + exclamation point (!) then the sense of the switch is reversed for + that symbol. For example: + + -w -W !foo -W fo* + + would cause objcopy to weaken all symbols that start with "fo" + except for the symbol "foo". + +`-x' +`--discard-all' + Do not copy non-global symbols from the source file. + +`-X' +`--discard-locals' + Do not copy compiler-generated local symbols. (These usually + start with `L' or `.'.) + +`-b BYTE' +`--byte=BYTE' + Keep only every BYTEth byte of the input file (header data is not + affected). BYTE can be in the range from 0 to INTERLEAVE-1, where + INTERLEAVE is given by the `-i' or `--interleave' option, or the + default of 4. This option is useful for creating files to program + ROM. It is typically used with an `srec' output target. + +`-i INTERLEAVE' +`--interleave=INTERLEAVE' + Only copy one out of every INTERLEAVE bytes. Select which byte to + copy with the `-b' or `--byte' option. The default is 4. + `objcopy' ignores this option if you do not specify either `-b' or + `--byte'. + +`-p' +`--preserve-dates' + Set the access and modification dates of the output file to be the + same as those of the input file. + +`--debugging' + Convert debugging information, if possible. This is not the + default because only certain debugging formats are supported, and + the conversion process can be time consuming. + +`--gap-fill VAL' + Fill gaps between sections with VAL. This operation applies to + the _load address_ (LMA) of the sections. It is done by increasing + the size of the section with the lower address, and filling in the + extra space created with VAL. + +`--pad-to ADDRESS' + Pad the output file up to the load address ADDRESS. This is done + by increasing the size of the last section. The extra space is + filled in with the value specified by `--gap-fill' (default zero). + +`--set-start VAL' + Set the start address of the new file to VAL. Not all object file + formats support setting the start address. + +`--change-start INCR' +`--adjust-start INCR' + Change the start address by adding INCR. Not all object file + formats support setting the start address. + +`--change-addresses INCR' +`--adjust-vma INCR' + Change the VMA and LMA addresses of all sections, as well as the + start address, by adding INCR. Some object file formats do not + permit section addresses to be changed arbitrarily. Note that + this does not relocate the sections; if the program expects + sections to be loaded at a certain address, and this option is + used to change the sections such that they are loaded at a + different address, the program may fail. + +`--change-section-address SECTION{=,+,-}VAL' +`--adjust-section-vma SECTION{=,+,-}VAL' + Set or change both the VMA address and the LMA address of the named + SECTION. If `=' is used, the section address is set to VAL. + Otherwise, VAL is added to or subtracted from the section address. + See the comments under `--change-addresses', above. If SECTION + does not exist in the input file, a warning will be issued, unless + `--no-change-warnings' is used. + +`--change-section-lma SECTION{=,+,-}VAL' + Set or change the LMA address of the named SECTION. The LMA + address is the address where the section will be loaded into + memory at program load time. Normally this is the same as the VMA + address, which is the address of the section at program run time, + but on some systems, especially those where a program is held in + ROM, the two can be different. If `=' is used, the section + address is set to VAL. Otherwise, VAL is added to or subtracted + from the section address. See the comments under + `--change-addresses', above. If SECTION does not exist in the + input file, a warning will be issued, unless + `--no-change-warnings' is used. + +`--change-section-vma SECTION{=,+,-}VAL' + Set or change the VMA address of the named SECTION. The VMA + address is the address where the section will be located once the + program has started executing. Normally this is the same as the + LMA address, which is the address where the section will be loaded + into memory, but on some systems, especially those where a program + is held in ROM, the two can be different. If `=' is used, the + section address is set to VAL. Otherwise, VAL is added to or + subtracted from the section address. See the comments under + `--change-addresses', above. If SECTION does not exist in the + input file, a warning will be issued, unless + `--no-change-warnings' is used. + +`--change-warnings' +`--adjust-warnings' + If `--change-section-address' or `--change-section-lma' or + `--change-section-vma' is used, and the named section does not + exist, issue a warning. This is the default. + +`--no-change-warnings' +`--no-adjust-warnings' + Do not issue a warning if `--change-section-address' or + `--adjust-section-lma' or `--adjust-section-vma' is used, even if + the named section does not exist. + +`--set-section-flags SECTION=FLAGS' + Set the flags for the named section. The FLAGS argument is a + comma separated string of flag names. The recognized names are + `alloc', `contents', `load', `noload', `readonly', `code', `data', + `rom', `share', and `debug'. You can set the `contents' flag for + a section which does not have contents, but it is not meaningful + to clear the `contents' flag of a section which does have + contents-just remove the section instead. Not all flags are + meaningful for all object file formats. + +`--add-section SECTIONNAME=FILENAME' + Add a new section named SECTIONNAME while copying the file. The + contents of the new section are taken from the file FILENAME. The + size of the section will be the size of the file. This option only + works on file formats which can support sections with arbitrary + names. + +`--rename-section OLDNAME=NEWNAME[,FLAGS]' + Rename a section from OLDNAME to NEWNAME, optionally changing the + section's flags to FLAGS in the process. This has the advantage + over usng a linker script to perform the rename in that the output + stays as an object file and does not become a linked executable. + + This option is particularly helpful when the input format is + binary, since this will always create a section called .data. If + for example, you wanted instead to create a section called .rodata + containing binary data you could use the following command line to + achieve it: + + objcopy -I binary -O <output_format> -B <architecture> \ + --rename-section .data=.rodata,alloc,load,readonly,data,contents \ + <input_binary_file> <output_object_file> + +`--long-section-names {enable,disable,keep}' + Controls the handling of long section names when processing `COFF' + and `PE-COFF' object formats. The default behaviour, `keep', is + to preserve long section names if any are present in the input + file. The `enable' and `disable' options forcibly enable or + disable the use of long section names in the output object; when + `disable' is in effect, any long section names in the input object + will be truncated. The `enable' option will only emit long + section names if any are present in the inputs; this is mostly the + same as `keep', but it is left undefined whether the `enable' + option might force the creation of an empty string table in the + output file. + +`--change-leading-char' + Some object file formats use special characters at the start of + symbols. The most common such character is underscore, which + compilers often add before every symbol. This option tells + `objcopy' to change the leading character of every symbol when it + converts between object file formats. If the object file formats + use the same leading character, this option has no effect. + Otherwise, it will add a character, or remove a character, or + change a character, as appropriate. + +`--remove-leading-char' + If the first character of a global symbol is a special symbol + leading character used by the object file format, remove the + character. The most common symbol leading character is + underscore. This option will remove a leading underscore from all + global symbols. This can be useful if you want to link together + objects of different file formats with different conventions for + symbol names. This is different from `--change-leading-char' + because it always changes the symbol name when appropriate, + regardless of the object file format of the output file. + +`--reverse-bytes=NUM' + Reverse the bytes in a section with output contents. A section + length must be evenly divisible by the value given in order for + the swap to be able to take place. Reversing takes place before + the interleaving is performed. + + This option is used typically in generating ROM images for + problematic target systems. For example, on some target boards, + the 32-bit words fetched from 8-bit ROMs are re-assembled in + little-endian byte order regardless of the CPU byte order. + Depending on the programming model, the endianness of the ROM may + need to be modified. + + Consider a simple file with a section containing the following + eight bytes: `12345678'. + + Using `--reverse-bytes=2' for the above example, the bytes in the + output file would be ordered `21436587'. + + Using `--reverse-bytes=4' for the above example, the bytes in the + output file would be ordered `43218765'. + + By using `--reverse-bytes=2' for the above example, followed by + `--reverse-bytes=4' on the output file, the bytes in the second + output file would be ordered `34127856'. + +`--srec-len=IVAL' + Meaningful only for srec output. Set the maximum length of the + Srecords being produced to IVAL. This length covers both address, + data and crc fields. + +`--srec-forceS3' + Meaningful only for srec output. Avoid generation of S1/S2 + records, creating S3-only record format. + +`--redefine-sym OLD=NEW' + Change the name of a symbol OLD, to NEW. This can be useful when + one is trying link two things together for which you have no + source, and there are name collisions. + +`--redefine-syms=FILENAME' + Apply `--redefine-sym' to each symbol pair "OLD NEW" listed in the + file FILENAME. FILENAME is simply a flat file, with one symbol + pair per line. Line comments may be introduced by the hash + character. This option may be given more than once. + +`--weaken' + Change all global symbols in the file to be weak. This can be + useful when building an object which will be linked against other + objects using the `-R' option to the linker. This option is only + effective when using an object file format which supports weak + symbols. + +`--keep-symbols=FILENAME' + Apply `--keep-symbol' option to each symbol listed in the file + FILENAME. FILENAME is simply a flat file, with one symbol name + per line. Line comments may be introduced by the hash character. + This option may be given more than once. + +`--strip-symbols=FILENAME' + Apply `--strip-symbol' option to each symbol listed in the file + FILENAME. FILENAME is simply a flat file, with one symbol name + per line. Line comments may be introduced by the hash character. + This option may be given more than once. + +`--strip-unneeded-symbols=FILENAME' + Apply `--strip-unneeded-symbol' option to each symbol listed in + the file FILENAME. FILENAME is simply a flat file, with one + symbol name per line. Line comments may be introduced by the hash + character. This option may be given more than once. + +`--keep-global-symbols=FILENAME' + Apply `--keep-global-symbol' option to each symbol listed in the + file FILENAME. FILENAME is simply a flat file, with one symbol + name per line. Line comments may be introduced by the hash + character. This option may be given more than once. + +`--localize-symbols=FILENAME' + Apply `--localize-symbol' option to each symbol listed in the file + FILENAME. FILENAME is simply a flat file, with one symbol name + per line. Line comments may be introduced by the hash character. + This option may be given more than once. + +`--globalize-symbols=FILENAME' + Apply `--globalize-symbol' option to each symbol listed in the file + FILENAME. FILENAME is simply a flat file, with one symbol name + per line. Line comments may be introduced by the hash character. + This option may be given more than once. + +`--weaken-symbols=FILENAME' + Apply `--weaken-symbol' option to each symbol listed in the file + FILENAME. FILENAME is simply a flat file, with one symbol name + per line. Line comments may be introduced by the hash character. + This option may be given more than once. + +`--alt-machine-code=INDEX' + If the output architecture has alternate machine codes, use the + INDEXth code instead of the default one. This is useful in case a + machine is assigned an official code and the tool-chain adopts the + new code, but other applications still depend on the original code + being used. For ELF based architectures if the INDEX alternative + does not exist then the value is treated as an absolute number to + be stored in the e_machine field of the ELF header. + +`--writable-text' + Mark the output text as writable. This option isn't meaningful + for all object file formats. + +`--readonly-text' + Make the output text write protected. This option isn't + meaningful for all object file formats. + +`--pure' + Mark the output file as demand paged. This option isn't + meaningful for all object file formats. + +`--impure' + Mark the output file as impure. This option isn't meaningful for + all object file formats. + +`--prefix-symbols=STRING' + Prefix all symbols in the output file with STRING. + +`--prefix-sections=STRING' + Prefix all section names in the output file with STRING. + +`--prefix-alloc-sections=STRING' + Prefix all the names of all allocated sections in the output file + with STRING. + +`--add-gnu-debuglink=PATH-TO-FILE' + Creates a .gnu_debuglink section which contains a reference to + PATH-TO-FILE and adds it to the output file. + +`--keep-file-symbols' + When stripping a file, perhaps with `--strip-debug' or + `--strip-unneeded', retain any symbols specifying source file + names, which would otherwise get stripped. + +`--only-keep-debug' + Strip a file, removing contents of any sections that would not be + stripped by `--strip-debug' and leaving the debugging sections + intact. In ELF files, this preserves all note sections in the + output. + + The intention is that this option will be used in conjunction with + `--add-gnu-debuglink' to create a two part executable. One a + stripped binary which will occupy less space in RAM and in a + distribution and the second a debugging information file which is + only needed if debugging abilities are required. The suggested + procedure to create these files is as follows: + + 1. Link the executable as normal. Assuming that is is called + `foo' then... + + 2. Run `objcopy --only-keep-debug foo foo.dbg' to create a file + containing the debugging info. + + 3. Run `objcopy --strip-debug foo' to create a stripped + executable. + + 4. Run `objcopy --add-gnu-debuglink=foo.dbg foo' to add a link + to the debugging info into the stripped executable. + + Note--the choice of `.dbg' as an extension for the debug info file + is arbitrary. Also the `--only-keep-debug' step is optional. You + could instead do this: + + 1. Link the executable as normal. + + 2. Copy `foo' to `foo.full' + + 3. Run `objcopy --strip-debug foo' + + 4. Run `objcopy --add-gnu-debuglink=foo.full foo' + + i.e., the file pointed to by the `--add-gnu-debuglink' can be the + full executable. It does not have to be a file created by the + `--only-keep-debug' switch. + + Note--this switch is only intended for use on fully linked files. + It does not make sense to use it on object files where the + debugging information may be incomplete. Besides the + gnu_debuglink feature currently only supports the presence of one + filename containing debugging information, not multiple filenames + on a one-per-object-file basis. + +`--file-alignment NUM' + Specify the file alignment. Sections in the file will always + begin at file offsets which are multiples of this number. This + defaults to 512. [This option is specific to PE targets.] + +`--heap RESERVE' +`--heap RESERVE,COMMIT' + Specify the number of bytes of memory to reserve (and optionally + commit) to be used as heap for this program. [This option is + specific to PE targets.] + +`--image-base VALUE' + Use VALUE as the base address of your program or dll. This is the + lowest memory location that will be used when your program or dll + is loaded. To reduce the need to relocate and improve performance + of your dlls, each should have a unique base address and not + overlap any other dlls. The default is 0x400000 for executables, + and 0x10000000 for dlls. [This option is specific to PE targets.] + +`--section-alignment NUM' + Sets the section alignment. Sections in memory will always begin + at addresses which are a multiple of this number. Defaults to + 0x1000. [This option is specific to PE targets.] + +`--stack RESERVE' +`--stack RESERVE,COMMIT' + Specify the number of bytes of memory to reserve (and optionally + commit) to be used as stack for this program. [This option is + specific to PE targets.] + +`--subsystem WHICH' +`--subsystem WHICH:MAJOR' +`--subsystem WHICH:MAJOR.MINOR' + Specifies the subsystem under which your program will execute. The + legal values for WHICH are `native', `windows', `console', + `posix', `efi-app', `efi-bsd', `efi-rtd', `sal-rtd', and `xbox'. + You may optionally set the subsystem version also. Numeric values + are also accepted for WHICH. [This option is specific to PE + targets.] + +`--extract-symbol' + Keep the file's section flags and symbols but remove all section + data. Specifically, the option: + + * removes the contents of all sections; + + * sets the size of every section to zero; and + + * sets the file's start address to zero. + + This option is used to build a `.sym' file for a VxWorks kernel. + It can also be a useful way of reducing the size of a + `--just-symbols' linker input file. + +`-V' +`--version' + Show the version number of `objcopy'. + +`-v' +`--verbose' + Verbose output: list all object files modified. In the case of + archives, `objcopy -V' lists all members of the archive. + +`--help' + Show a summary of the options to `objcopy'. + +`--info' + Display a list showing all architectures and object formats + available. + + +File: binutils.info, Node: objdump, Next: ranlib, Prev: objcopy, Up: Top + +4 objdump +********* + + objdump [`-a'|`--archive-headers'] + [`-b' BFDNAME|`--target=BFDNAME'] + [`-C'|`--demangle'[=STYLE] ] + [`-d'|`--disassemble'] + [`-D'|`--disassemble-all'] + [`-z'|`--disassemble-zeroes'] + [`-EB'|`-EL'|`--endian='{big | little }] + [`-f'|`--file-headers'] + [`-F'|`--file-offsets'] + [`--file-start-context'] + [`-g'|`--debugging'] + [`-e'|`--debugging-tags'] + [`-h'|`--section-headers'|`--headers'] + [`-i'|`--info'] + [`-j' SECTION|`--section='SECTION] + [`-l'|`--line-numbers'] + [`-S'|`--source'] + [`-m' MACHINE|`--architecture='MACHINE] + [`-M' OPTIONS|`--disassembler-options='OPTIONS] + [`-p'|`--private-headers'] + [`-r'|`--reloc'] + [`-R'|`--dynamic-reloc'] + [`-s'|`--full-contents'] + [`-W[lLiaprmfFsoR]'| + `--dwarf'[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]] + [`-G'|`--stabs'] + [`-t'|`--syms'] + [`-T'|`--dynamic-syms'] + [`-x'|`--all-headers'] + [`-w'|`--wide'] + [`--start-address='ADDRESS] + [`--stop-address='ADDRESS] + [`--prefix-addresses'] + [`--[no-]show-raw-insn'] + [`--adjust-vma='OFFSET] + [`--special-syms'] + [`--prefix='PREFIX] + [`--prefix-strip='LEVEL] + [`--insn-width='WIDTH] + [`-V'|`--version'] + [`-H'|`--help'] + OBJFILE... + + `objdump' displays information about one or more object files. The +options control what particular information to display. This +information is mostly useful to programmers who are working on the +compilation tools, as opposed to programmers who just want their +program to compile and work. + + OBJFILE... are the object files to be examined. When you specify +archives, `objdump' shows information on each of the member object +files. + + The long and short forms of options, shown here as alternatives, are +equivalent. At least one option from the list +`-a,-d,-D,-e,-f,-g,-G,-h,-H,-p,-r,-R,-s,-S,-t,-T,-V,-x' must be given. + +`-a' +`--archive-header' + If any of the OBJFILE files are archives, display the archive + header information (in a format similar to `ls -l'). Besides the + information you could list with `ar tv', `objdump -a' shows the + object file format of each archive member. + +`--adjust-vma=OFFSET' + When dumping information, first add OFFSET to all the section + addresses. This is useful if the section addresses do not + correspond to the symbol table, which can happen when putting + sections at particular addresses when using a format which can not + represent section addresses, such as a.out. + +`-b BFDNAME' +`--target=BFDNAME' + Specify that the object-code format for the object files is + BFDNAME. This option may not be necessary; OBJDUMP can + automatically recognize many formats. + + For example, + objdump -b oasys -m vax -h fu.o + displays summary information from the section headers (`-h') of + `fu.o', which is explicitly identified (`-m') as a VAX object file + in the format produced by Oasys compilers. You can list the + formats available with the `-i' option. *Note Target Selection::, + for more information. + +`-C' +`--demangle[=STYLE]' + Decode ("demangle") low-level symbol names into user-level names. + Besides removing any initial underscore prepended by the system, + this makes C++ function names readable. Different compilers have + different mangling styles. The optional demangling style argument + can be used to choose an appropriate demangling style for your + compiler. *Note c++filt::, for more information on demangling. + +`-g' +`--debugging' + Display debugging information. This attempts to parse STABS and + IEEE debugging format information stored in the file and print it + out using a C like syntax. If neither of these formats are found + this option falls back on the `-W' option to print any DWARF + information in the file. + +`-e' +`--debugging-tags' + Like `-g', but the information is generated in a format compatible + with ctags tool. + +`-d' +`--disassemble' + Display the assembler mnemonics for the machine instructions from + OBJFILE. This option only disassembles those sections which are + expected to contain instructions. + +`-D' +`--disassemble-all' + Like `-d', but disassemble the contents of all sections, not just + those expected to contain instructions. + + If the target is an ARM architecture this switch also has the + effect of forcing the disassembler to decode pieces of data found + in code sections as if they were instructions. + +`--prefix-addresses' + When disassembling, print the complete address on each line. This + is the older disassembly format. + +`-EB' +`-EL' +`--endian={big|little}' + Specify the endianness of the object files. This only affects + disassembly. This can be useful when disassembling a file format + which does not describe endianness information, such as S-records. + +`-f' +`--file-headers' + Display summary information from the overall header of each of the + OBJFILE files. + +`-F' +`--file-offsets' + When disassembling sections, whenever a symbol is displayed, also + display the file offset of the region of data that is about to be + dumped. If zeroes are being skipped, then when disassembly + resumes, tell the user how many zeroes were skipped and the file + offset of the location from where the disassembly resumes. When + dumping sections, display the file offset of the location from + where the dump starts. + +`--file-start-context' + Specify that when displaying interlisted source code/disassembly + (assumes `-S') from a file that has not yet been displayed, extend + the context to the start of the file. + +`-h' +`--section-headers' +`--headers' + Display summary information from the section headers of the object + file. + + File segments may be relocated to nonstandard addresses, for + example by using the `-Ttext', `-Tdata', or `-Tbss' options to + `ld'. However, some object file formats, such as a.out, do not + store the starting address of the file segments. In those + situations, although `ld' relocates the sections correctly, using + `objdump -h' to list the file section headers cannot show the + correct addresses. Instead, it shows the usual addresses, which + are implicit for the target. + +`-H' +`--help' + Print a summary of the options to `objdump' and exit. + +`-i' +`--info' + Display a list showing all architectures and object formats + available for specification with `-b' or `-m'. + +`-j NAME' +`--section=NAME' + Display information only for section NAME. + +`-l' +`--line-numbers' + Label the display (using debugging information) with the filename + and source line numbers corresponding to the object code or relocs + shown. Only useful with `-d', `-D', or `-r'. + +`-m MACHINE' +`--architecture=MACHINE' + Specify the architecture to use when disassembling object files. + This can be useful when disassembling object files which do not + describe architecture information, such as S-records. You can + list the available architectures with the `-i' option. + + If the target is an ARM architecture then this switch has an + additional effect. It restricts the disassembly to only those + instructions supported by the architecture specified by MACHINE. + If it is necessary to use this switch because the input file does + not contain any architecture information, but it is also desired to + disassemble all the instructions use `-marm'. + +`-M OPTIONS' +`--disassembler-options=OPTIONS' + Pass target specific information to the disassembler. Only + supported on some targets. If it is necessary to specify more + than one disassembler option then multiple `-M' options can be + used or can be placed together into a comma separated list. + + If the target is an ARM architecture then this switch can be used + to select which register name set is used during disassembler. + Specifying `-M reg-names-std' (the default) will select the + register names as used in ARM's instruction set documentation, but + with register 13 called 'sp', register 14 called 'lr' and register + 15 called 'pc'. Specifying `-M reg-names-apcs' will select the + name set used by the ARM Procedure Call Standard, whilst + specifying `-M reg-names-raw' will just use `r' followed by the + register number. + + There are also two variants on the APCS register naming scheme + enabled by `-M reg-names-atpcs' and `-M reg-names-special-atpcs' + which use the ARM/Thumb Procedure Call Standard naming + conventions. (Either with the normal register names or the + special register names). + + This option can also be used for ARM architectures to force the + disassembler to interpret all instructions as Thumb instructions by + using the switch `--disassembler-options=force-thumb'. This can be + useful when attempting to disassemble thumb code produced by other + compilers. + + For the x86, some of the options duplicate functions of the `-m' + switch, but allow finer grained control. Multiple selections from + the following may be specified as a comma separated string. + `x86-64', `i386' and `i8086' select disassembly for the given + architecture. `intel' and `att' select between intel syntax mode + and AT&T syntax mode. `intel-mnemonic' and `att-mnemonic' select + between intel mnemonic mode and AT&T mnemonic mode. + `intel-mnemonic' implies `intel' and `att-mnemonic' implies `att'. + `addr64', `addr32', `addr16', `data32' and `data16' specify the + default address size and operand size. These four options will be + overridden if `x86-64', `i386' or `i8086' appear later in the + option string. Lastly, `suffix', when in AT&T mode, instructs the + disassembler to print a mnemonic suffix even when the suffix could + be inferred by the operands. + + For PowerPC, `booke' controls the disassembly of BookE + instructions. `32' and `64' select PowerPC and PowerPC64 + disassembly, respectively. `e300' selects disassembly for the + e300 family. `440' selects disassembly for the PowerPC 440. + `ppcps' selects disassembly for the paired single instructions of + the PPC750CL. + + For MIPS, this option controls the printing of instruction mnemonic + names and register names in disassembled instructions. Multiple + selections from the following may be specified as a comma separated + string, and invalid options are ignored: + + `no-aliases' + Print the 'raw' instruction mnemonic instead of some pseudo + instruction mnemonic. I.e., print 'daddu' or 'or' instead of + 'move', 'sll' instead of 'nop', etc. + + `gpr-names=ABI' + Print GPR (general-purpose register) names as appropriate for + the specified ABI. By default, GPR names are selected + according to the ABI of the binary being disassembled. + + `fpr-names=ABI' + Print FPR (floating-point register) names as appropriate for + the specified ABI. By default, FPR numbers are printed + rather than names. + + `cp0-names=ARCH' + Print CP0 (system control coprocessor; coprocessor 0) + register names as appropriate for the CPU or architecture + specified by ARCH. By default, CP0 register names are + selected according to the architecture and CPU of the binary + being disassembled. + + `hwr-names=ARCH' + Print HWR (hardware register, used by the `rdhwr' + instruction) names as appropriate for the CPU or architecture + specified by ARCH. By default, HWR names are selected + according to the architecture and CPU of the binary being + disassembled. + + `reg-names=ABI' + Print GPR and FPR names as appropriate for the selected ABI. + + `reg-names=ARCH' + Print CPU-specific register names (CP0 register and HWR names) + as appropriate for the selected CPU or architecture. + + For any of the options listed above, ABI or ARCH may be specified + as `numeric' to have numbers printed rather than names, for the + selected types of registers. You can list the available values of + ABI and ARCH using the `--help' option. + + For VAX, you can specify function entry addresses with `-M + entry:0xf00ba'. You can use this multiple times to properly + disassemble VAX binary files that don't contain symbol tables (like + ROM dumps). In these cases, the function entry mask would + otherwise be decoded as VAX instructions, which would probably + lead the rest of the function being wrongly disassembled. + +`-p' +`--private-headers' + Print information that is specific to the object file format. The + exact information printed depends upon the object file format. + For some object file formats, no additional information is printed. + +`-r' +`--reloc' + Print the relocation entries of the file. If used with `-d' or + `-D', the relocations are printed interspersed with the + disassembly. + +`-R' +`--dynamic-reloc' + Print the dynamic relocation entries of the file. This is only + meaningful for dynamic objects, such as certain types of shared + libraries. As for `-r', if used with `-d' or `-D', the + relocations are printed interspersed with the disassembly. + +`-s' +`--full-contents' + Display the full contents of any sections requested. By default + all non-empty sections are displayed. + +`-S' +`--source' + Display source code intermixed with disassembly, if possible. + Implies `-d'. + +`--prefix=PREFIX' + Specify PREFIX to add to the absolute paths when used with `-S'. + +`--prefix-strip=LEVEL' + Indicate how many initial directory names to strip off the + hardwired absolute paths. It has no effect without + `--prefix='PREFIX. + +`--show-raw-insn' + When disassembling instructions, print the instruction in hex as + well as in symbolic form. This is the default except when + `--prefix-addresses' is used. + +`--no-show-raw-insn' + When disassembling instructions, do not print the instruction + bytes. This is the default when `--prefix-addresses' is used. + +`--insn-width=WIDTH' + Display WIDTH bytes on a single line when disassembling + instructions. + +`-W[lLiaprmfFsoR]' +`--dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]' + Displays the contents of the debug sections in the file, if any are + present. If one of the optional letters or words follows the + switch then only data found in those specific sections will be + dumped. + +`-G' +`--stabs' + Display the full contents of any sections requested. Display the + contents of the .stab and .stab.index and .stab.excl sections from + an ELF file. This is only useful on systems (such as Solaris 2.0) + in which `.stab' debugging symbol-table entries are carried in an + ELF section. In most other file formats, debugging symbol-table + entries are interleaved with linkage symbols, and are visible in + the `--syms' output. For more information on stabs symbols, see + *Note Stabs: (stabs.info)Top. + +`--start-address=ADDRESS' + Start displaying data at the specified address. This affects the + output of the `-d', `-r' and `-s' options. + +`--stop-address=ADDRESS' + Stop displaying data at the specified address. This affects the + output of the `-d', `-r' and `-s' options. + +`-t' +`--syms' + Print the symbol table entries of the file. This is similar to + the information provided by the `nm' program, although the display + format is different. The format of the output depends upon the + format of the file being dumped, but there are two main types. + One looks like this: + + [ 4](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss + [ 6](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x00000000 fred + + where the number inside the square brackets is the number of the + entry in the symbol table, the SEC number is the section number, + the FL value are the symbol's flag bits, the TY number is the + symbol's type, the SCL number is the symbol's storage class and + the NX value is the number of auxilary entries associated with the + symbol. The last two fields are the symbol's value and its name. + + The other common output format, usually seen with ELF based files, + looks like this: + + 00000000 l d .bss 00000000 .bss + 00000000 g .text 00000000 fred + + Here the first number is the symbol's value (sometimes refered to + as its address). The next field is actually a set of characters + and spaces indicating the flag bits that are set on the symbol. + These characters are described below. Next is the section with + which the symbol is associated or _*ABS*_ if the section is + absolute (ie not connected with any section), or _*UND*_ if the + section is referenced in the file being dumped, but not defined + there. + + After the section name comes another field, a number, which for + common symbols is the alignment and for other symbol is the size. + Finally the symbol's name is displayed. + + The flag characters are divided into 7 groups as follows: + `l' + `g' + `u' + `!' + The symbol is a local (l), global (g), unique global (u), + neither global nor local (a space) or both global and local + (!). A symbol can be neither local or global for a variety + of reasons, e.g., because it is used for debugging, but it is + probably an indication of a bug if it is ever both local and + global. Unique global symbols are a GNU extension to the + standard set of ELF symbol bindings. For such a symbol the + dynamic linker will make sure that in the entire process + there is just one symbol with this name and type in use. + + `w' + The symbol is weak (w) or strong (a space). + + `C' + The symbol denotes a constructor (C) or an ordinary symbol (a + space). + + `W' + The symbol is a warning (W) or a normal symbol (a space). A + warning symbol's name is a message to be displayed if the + symbol following the warning symbol is ever referenced. + + `I' + + `i' + The symbol is an indirect reference to another symbol (I), a + function to be evaluated during reloc processing (i) or a + normal symbol (a space). + + `d' + `D' + The symbol is a debugging symbol (d) or a dynamic symbol (D) + or a normal symbol (a space). + + `F' + + `f' + + `O' + The symbol is the name of a function (F) or a file (f) or an + object (O) or just a normal symbol (a space). + +`-T' +`--dynamic-syms' + Print the dynamic symbol table entries of the file. This is only + meaningful for dynamic objects, such as certain types of shared + libraries. This is similar to the information provided by the `nm' + program when given the `-D' (`--dynamic') option. + +`--special-syms' + When displaying symbols include those which the target considers + to be special in some way and which would not normally be of + interest to the user. + +`-V' +`--version' + Print the version number of `objdump' and exit. + +`-x' +`--all-headers' + Display all available header information, including the symbol + table and relocation entries. Using `-x' is equivalent to + specifying all of `-a -f -h -p -r -t'. + +`-w' +`--wide' + Format some lines for output devices that have more than 80 + columns. Also do not truncate symbol names when they are + displayed. + +`-z' +`--disassemble-zeroes' + Normally the disassembly output will skip blocks of zeroes. This + option directs the disassembler to disassemble those blocks, just + like any other data. + + +File: binutils.info, Node: ranlib, Next: readelf, Prev: objdump, Up: Top + +5 ranlib +******** + + ranlib [`-vVt'] ARCHIVE + + `ranlib' generates an index to the contents of an archive and stores +it in the archive. The index lists each symbol defined by a member of +an archive that is a relocatable object file. + + You may use `nm -s' or `nm --print-armap' to list this index. + + An archive with such an index speeds up linking to the library and +allows routines in the library to call each other without regard to +their placement in the archive. + + The GNU `ranlib' program is another form of GNU `ar'; running +`ranlib' is completely equivalent to executing `ar -s'. *Note ar::. + +`-v' +`-V' +`--version' + Show the version number of `ranlib'. + +`-t' + Update the timestamp of the symbol map of an archive. + + +File: binutils.info, Node: size, Next: strings, Prev: readelf, Up: Top + +6 size +****** + + size [`-A'|`-B'|`--format='COMPATIBILITY] + [`--help'] + [`-d'|`-o'|`-x'|`--radix='NUMBER] + [`--common'] + [`-t'|`--totals'] + [`--target='BFDNAME] [`-V'|`--version'] + [OBJFILE...] + + The GNU `size' utility lists the section sizes--and the total +size--for each of the object or archive files OBJFILE in its argument +list. By default, one line of output is generated for each object file +or each module in an archive. + + OBJFILE... are the object files to be examined. If none are +specified, the file `a.out' will be used. + + The command line options have the following meanings: + +`-A' +`-B' +`--format=COMPATIBILITY' + Using one of these options, you can choose whether the output from + GNU `size' resembles output from System V `size' (using `-A', or + `--format=sysv'), or Berkeley `size' (using `-B', or + `--format=berkeley'). The default is the one-line format similar + to Berkeley's. + + Here is an example of the Berkeley (default) format of output from + `size': + $ size --format=Berkeley ranlib size + text data bss dec hex filename + 294880 81920 11592 388392 5ed28 ranlib + 294880 81920 11888 388688 5ee50 size + + This is the same data, but displayed closer to System V + conventions: + + $ size --format=SysV ranlib size + ranlib : + section size addr + .text 294880 8192 + .data 81920 303104 + .bss 11592 385024 + Total 388392 + + + size : + section size addr + .text 294880 8192 + .data 81920 303104 + .bss 11888 385024 + Total 388688 + +`--help' + Show a summary of acceptable arguments and options. + +`-d' +`-o' +`-x' +`--radix=NUMBER' + Using one of these options, you can control whether the size of + each section is given in decimal (`-d', or `--radix=10'); octal + (`-o', or `--radix=8'); or hexadecimal (`-x', or `--radix=16'). + In `--radix=NUMBER', only the three values (8, 10, 16) are + supported. The total size is always given in two radices; decimal + and hexadecimal for `-d' or `-x' output, or octal and hexadecimal + if you're using `-o'. + +`--common' + Print total size of common symbols in each file. When using + Berkeley format these are included in the bss size. + +`-t' +`--totals' + Show totals of all objects listed (Berkeley format listing mode + only). + +`--target=BFDNAME' + Specify that the object-code format for OBJFILE is BFDNAME. This + option may not be necessary; `size' can automatically recognize + many formats. *Note Target Selection::, for more information. + +`-V' +`--version' + Display the version number of `size'. + + +File: binutils.info, Node: strings, Next: strip, Prev: size, Up: Top + +7 strings +********* + + strings [`-afovV'] [`-'MIN-LEN] + [`-n' MIN-LEN] [`--bytes='MIN-LEN] + [`-t' RADIX] [`--radix='RADIX] + [`-e' ENCODING] [`--encoding='ENCODING] + [`-'] [`--all'] [`--print-file-name'] + [`-T' BFDNAME] [`--target='BFDNAME] + [`--help'] [`--version'] FILE... + + For each FILE given, GNU `strings' prints the printable character +sequences that are at least 4 characters long (or the number given with +the options below) and are followed by an unprintable character. By +default, it only prints the strings from the initialized and loaded +sections of object files; for other types of files, it prints the +strings from the whole file. + + `strings' is mainly useful for determining the contents of non-text +files. + +`-a' +`--all' +`-' + Do not scan only the initialized and loaded sections of object + files; scan the whole files. + +`-f' +`--print-file-name' + Print the name of the file before each string. + +`--help' + Print a summary of the program usage on the standard output and + exit. + +`-MIN-LEN' +`-n MIN-LEN' +`--bytes=MIN-LEN' + Print sequences of characters that are at least MIN-LEN characters + long, instead of the default 4. + +`-o' + Like `-t o'. Some other versions of `strings' have `-o' act like + `-t d' instead. Since we can not be compatible with both ways, we + simply chose one. + +`-t RADIX' +`--radix=RADIX' + Print the offset within the file before each string. The single + character argument specifies the radix of the offset--`o' for + octal, `x' for hexadecimal, or `d' for decimal. + +`-e ENCODING' +`--encoding=ENCODING' + Select the character encoding of the strings that are to be found. + Possible values for ENCODING are: `s' = single-7-bit-byte + characters (ASCII, ISO 8859, etc., default), `S' = + single-8-bit-byte characters, `b' = 16-bit bigendian, `l' = 16-bit + littleendian, `B' = 32-bit bigendian, `L' = 32-bit littleendian. + Useful for finding wide character strings. (`l' and `b' apply to, + for example, Unicode UTF-16/UCS-2 encodings). + +`-T BFDNAME' +`--target=BFDNAME' + Specify an object code format other than your system's default + format. *Note Target Selection::, for more information. + +`-v' +`-V' +`--version' + Print the program version number on the standard output and exit. + + +File: binutils.info, Node: strip, Next: c++filt, Prev: strings, Up: Top + +8 strip +******* + + strip [`-F' BFDNAME |`--target='BFDNAME] + [`-I' BFDNAME |`--input-target='BFDNAME] + [`-O' BFDNAME |`--output-target='BFDNAME] + [`-s'|`--strip-all'] + [`-S'|`-g'|`-d'|`--strip-debug'] + [`-K' SYMBOLNAME |`--keep-symbol='SYMBOLNAME] + [`-N' SYMBOLNAME |`--strip-symbol='SYMBOLNAME] + [`-w'|`--wildcard'] + [`-x'|`--discard-all'] [`-X' |`--discard-locals'] + [`-R' SECTIONNAME |`--remove-section='SECTIONNAME] + [`-o' FILE] [`-p'|`--preserve-dates'] + [`--keep-file-symbols'] + [`--only-keep-debug'] + [`-v' |`--verbose'] [`-V'|`--version'] + [`--help'] [`--info'] + OBJFILE... + + GNU `strip' discards all symbols from object files OBJFILE. The +list of object files may include archives. At least one object file +must be given. + + `strip' modifies the files named in its argument, rather than +writing modified copies under different names. + +`-F BFDNAME' +`--target=BFDNAME' + Treat the original OBJFILE as a file with the object code format + BFDNAME, and rewrite it in the same format. *Note Target + Selection::, for more information. + +`--help' + Show a summary of the options to `strip' and exit. + +`--info' + Display a list showing all architectures and object formats + available. + +`-I BFDNAME' +`--input-target=BFDNAME' + Treat the original OBJFILE as a file with the object code format + BFDNAME. *Note Target Selection::, for more information. + +`-O BFDNAME' +`--output-target=BFDNAME' + Replace OBJFILE with a file in the output format BFDNAME. *Note + Target Selection::, for more information. + +`-R SECTIONNAME' +`--remove-section=SECTIONNAME' + Remove any section named SECTIONNAME from the output file. This + option may be given more than once. Note that using this option + inappropriately may make the output file unusable. + +`-s' +`--strip-all' + Remove all symbols. + +`-g' +`-S' +`-d' +`--strip-debug' + Remove debugging symbols only. + +`--strip-unneeded' + Remove all symbols that are not needed for relocation processing. + +`-K SYMBOLNAME' +`--keep-symbol=SYMBOLNAME' + When stripping symbols, keep symbol SYMBOLNAME even if it would + normally be stripped. This option may be given more than once. + +`-N SYMBOLNAME' +`--strip-symbol=SYMBOLNAME' + Remove symbol SYMBOLNAME from the source file. This option may be + given more than once, and may be combined with strip options other + than `-K'. + +`-o FILE' + Put the stripped output in FILE, rather than replacing the + existing file. When this argument is used, only one OBJFILE + argument may be specified. + +`-p' +`--preserve-dates' + Preserve the access and modification dates of the file. + +`-w' +`--wildcard' + Permit regular expressions in SYMBOLNAMEs used in other command + line options. The question mark (?), asterisk (*), backslash (\) + and square brackets ([]) operators can be used anywhere in the + symbol name. If the first character of the symbol name is the + exclamation point (!) then the sense of the switch is reversed for + that symbol. For example: + + -w -K !foo -K fo* + + would cause strip to only keep symbols that start with the letters + "fo", but to discard the symbol "foo". + +`-x' +`--discard-all' + Remove non-global symbols. + +`-X' +`--discard-locals' + Remove compiler-generated local symbols. (These usually start + with `L' or `.'.) + +`--keep-file-symbols' + When stripping a file, perhaps with `--strip-debug' or + `--strip-unneeded', retain any symbols specifying source file + names, which would otherwise get stripped. + +`--only-keep-debug' + Strip a file, removing contents of any sections that would not be + stripped by `--strip-debug' and leaving the debugging sections + intact. In ELF files, this preserves all note sections in the + output. + + The intention is that this option will be used in conjunction with + `--add-gnu-debuglink' to create a two part executable. One a + stripped binary which will occupy less space in RAM and in a + distribution and the second a debugging information file which is + only needed if debugging abilities are required. The suggested + procedure to create these files is as follows: + + 1. Link the executable as normal. Assuming that is is called + `foo' then... + + 2. Run `objcopy --only-keep-debug foo foo.dbg' to create a file + containing the debugging info. + + 3. Run `objcopy --strip-debug foo' to create a stripped + executable. + + 4. Run `objcopy --add-gnu-debuglink=foo.dbg foo' to add a link + to the debugging info into the stripped executable. + + Note--the choice of `.dbg' as an extension for the debug info file + is arbitrary. Also the `--only-keep-debug' step is optional. You + could instead do this: + + 1. Link the executable as normal. + + 2. Copy `foo' to `foo.full' + + 3. Run `strip --strip-debug foo' + + 4. Run `objcopy --add-gnu-debuglink=foo.full foo' + + i.e., the file pointed to by the `--add-gnu-debuglink' can be the + full executable. It does not have to be a file created by the + `--only-keep-debug' switch. + + Note--this switch is only intended for use on fully linked files. + It does not make sense to use it on object files where the + debugging information may be incomplete. Besides the + gnu_debuglink feature currently only supports the presence of one + filename containing debugging information, not multiple filenames + on a one-per-object-file basis. + +`-V' +`--version' + Show the version number for `strip'. + +`-v' +`--verbose' + Verbose output: list all object files modified. In the case of + archives, `strip -v' lists all members of the archive. + + +File: binutils.info, Node: c++filt, Next: addr2line, Prev: strip, Up: Top + +9 c++filt +********* + + c++filt [`-_'|`--strip-underscores'] + [`-n'|`--no-strip-underscores'] + [`-p'|`--no-params'] + [`-t'|`--types'] + [`-i'|`--no-verbose'] + [`-s' FORMAT|`--format='FORMAT] + [`--help'] [`--version'] [SYMBOL...] + + The C++ and Java languages provide function overloading, which means +that you can write many functions with the same name, providing that +each function takes parameters of different types. In order to be able +to distinguish these similarly named functions C++ and Java encode them +into a low-level assembler name which uniquely identifies each +different version. This process is known as "mangling". The `c++filt' +(1) program does the inverse mapping: it decodes ("demangles") low-level +names into user-level names so that they can be read. + + Every alphanumeric word (consisting of letters, digits, underscores, +dollars, or periods) seen in the input is a potential mangled name. If +the name decodes into a C++ name, the C++ name replaces the low-level +name in the output, otherwise the original word is output. In this way +you can pass an entire assembler source file, containing mangled names, +through `c++filt' and see the same source file containing demangled +names. + + You can also use `c++filt' to decipher individual symbols by passing +them on the command line: + + c++filt SYMBOL + + If no SYMBOL arguments are given, `c++filt' reads symbol names from +the standard input instead. All the results are printed on the +standard output. The difference between reading names from the command +line versus reading names from the standard input is that command line +arguments are expected to be just mangled names and no checking is +performed to separate them from surrounding text. Thus for example: + + c++filt -n _Z1fv + + will work and demangle the name to "f()" whereas: + + c++filt -n _Z1fv, + + will not work. (Note the extra comma at the end of the mangled name +which makes it invalid). This command however will work: + + echo _Z1fv, | c++filt -n + + and will display "f(),", i.e., the demangled name followed by a +trailing comma. This behaviour is because when the names are read from +the standard input it is expected that they might be part of an +assembler source file where there might be extra, extraneous characters +trailing after a mangled name. For example: + + .type _Z1fv, @function + +`-_' +`--strip-underscores' + On some systems, both the C and C++ compilers put an underscore in + front of every name. For example, the C name `foo' gets the + low-level name `_foo'. This option removes the initial + underscore. Whether `c++filt' removes the underscore by default + is target dependent. + +`-n' +`--no-strip-underscores' + Do not remove the initial underscore. + +`-p' +`--no-params' + When demangling the name of a function, do not display the types of + the function's parameters. + +`-t' +`--types' + Attempt to demangle types as well as function names. This is + disabled by default since mangled types are normally only used + internally in the compiler, and they can be confused with + non-mangled names. For example, a function called "a" treated as + a mangled type name would be demangled to "signed char". + +`-i' +`--no-verbose' + Do not include implementation details (if any) in the demangled + output. + +`-s FORMAT' +`--format=FORMAT' + `c++filt' can decode various methods of mangling, used by + different compilers. The argument to this option selects which + method it uses: + + `auto' + Automatic selection based on executable (the default method) + + `gnu' + the one used by the GNU C++ compiler (g++) + + `lucid' + the one used by the Lucid compiler (lcc) + + `arm' + the one specified by the C++ Annotated Reference Manual + + `hp' + the one used by the HP compiler (aCC) + + `edg' + the one used by the EDG compiler + + `gnu-v3' + the one used by the GNU C++ compiler (g++) with the V3 ABI. + + `java' + the one used by the GNU Java compiler (gcj) + + `gnat' + the one used by the GNU Ada compiler (GNAT). + +`--help' + Print a summary of the options to `c++filt' and exit. + +`--version' + Print the version number of `c++filt' and exit. + + _Warning:_ `c++filt' is a new utility, and the details of its user + interface are subject to change in future releases. In particular, + a command-line option may be required in the future to decode a + name passed as an argument on the command line; in other words, + + c++filt SYMBOL + + may in a future release become + + c++filt OPTION SYMBOL + + ---------- Footnotes ---------- + + (1) MS-DOS does not allow `+' characters in file names, so on MS-DOS +this program is named `CXXFILT'. + + +File: binutils.info, Node: addr2line, Next: nlmconv, Prev: c++filt, Up: Top + +10 addr2line +************ + + addr2line [`-b' BFDNAME|`--target='BFDNAME] + [`-C'|`--demangle'[=STYLE]] + [`-e' FILENAME|`--exe='FILENAME] + [`-f'|`--functions'] [`-s'|`--basename'] + [`-i'|`--inlines'] + [`-j'|`--section='NAME] + [`-H'|`--help'] [`-V'|`--version'] + [addr addr ...] + + `addr2line' translates addresses into file names and line numbers. +Given an address in an executable or an offset in a section of a +relocatable object, it uses the debugging information to figure out +which file name and line number are associated with it. + + The executable or relocatable object to use is specified with the +`-e' option. The default is the file `a.out'. The section in the +relocatable object to use is specified with the `-j' option. + + `addr2line' has two modes of operation. + + In the first, hexadecimal addresses are specified on the command +line, and `addr2line' displays the file name and line number for each +address. + + In the second, `addr2line' reads hexadecimal addresses from standard +input, and prints the file name and line number for each address on +standard output. In this mode, `addr2line' may be used in a pipe to +convert dynamically chosen addresses. + + The format of the output is `FILENAME:LINENO'. The file name and +line number for each address is printed on a separate line. If the +`-f' option is used, then each `FILENAME:LINENO' line is preceded by a +`FUNCTIONNAME' line which is the name of the function containing the +address. + + If the file name or function name can not be determined, `addr2line' +will print two question marks in their place. If the line number can +not be determined, `addr2line' will print 0. + + The long and short forms of options, shown here as alternatives, are +equivalent. + +`-b BFDNAME' +`--target=BFDNAME' + Specify that the object-code format for the object files is + BFDNAME. + +`-C' +`--demangle[=STYLE]' + Decode ("demangle") low-level symbol names into user-level names. + Besides removing any initial underscore prepended by the system, + this makes C++ function names readable. Different compilers have + different mangling styles. The optional demangling style argument + can be used to choose an appropriate demangling style for your + compiler. *Note c++filt::, for more information on demangling. + +`-e FILENAME' +`--exe=FILENAME' + Specify the name of the executable for which addresses should be + translated. The default file is `a.out'. + +`-f' +`--functions' + Display function names as well as file and line number information. + +`-s' +`--basenames' + Display only the base of each file name. + +`-i' +`--inlines' + If the address belongs to a function that was inlined, the source + information for all enclosing scopes back to the first non-inlined + function will also be printed. For example, if `main' inlines + `callee1' which inlines `callee2', and address is from `callee2', + the source information for `callee1' and `main' will also be + printed. + +`-j' +`--section' + Read offsets relative to the specified section instead of absolute + addresses. + + +File: binutils.info, Node: nlmconv, Next: windres, Prev: addr2line, Up: Top + +11 nlmconv +********** + +`nlmconv' converts a relocatable object file into a NetWare Loadable +Module. + + _Warning:_ `nlmconv' is not always built as part of the binary + utilities, since it is only useful for NLM targets. + + nlmconv [`-I' BFDNAME|`--input-target='BFDNAME] + [`-O' BFDNAME|`--output-target='BFDNAME] + [`-T' HEADERFILE|`--header-file='HEADERFILE] + [`-d'|`--debug'] [`-l' LINKER|`--linker='LINKER] + [`-h'|`--help'] [`-V'|`--version'] + INFILE OUTFILE + + `nlmconv' converts the relocatable `i386' object file INFILE into +the NetWare Loadable Module OUTFILE, optionally reading HEADERFILE for +NLM header information. For instructions on writing the NLM command +file language used in header files, see the `linkers' section, +`NLMLINK' in particular, of the `NLM Development and Tools Overview', +which is part of the NLM Software Developer's Kit ("NLM SDK"), +available from Novell, Inc. `nlmconv' uses the GNU Binary File +Descriptor library to read INFILE; see *Note BFD: (ld.info)BFD, for +more information. + + `nlmconv' can perform a link step. In other words, you can list +more than one object file for input if you list them in the definitions +file (rather than simply specifying one input file on the command line). +In this case, `nlmconv' calls the linker for you. + +`-I BFDNAME' +`--input-target=BFDNAME' + Object format of the input file. `nlmconv' can usually determine + the format of a given file (so no default is necessary). *Note + Target Selection::, for more information. + +`-O BFDNAME' +`--output-target=BFDNAME' + Object format of the output file. `nlmconv' infers the output + format based on the input format, e.g. for a `i386' input file the + output format is `nlm32-i386'. *Note Target Selection::, for more + information. + +`-T HEADERFILE' +`--header-file=HEADERFILE' + Reads HEADERFILE for NLM header information. For instructions on + writing the NLM command file language used in header files, see + see the `linkers' section, of the `NLM Development and Tools + Overview', which is part of the NLM Software Developer's Kit, + available from Novell, Inc. + +`-d' +`--debug' + Displays (on standard error) the linker command line used by + `nlmconv'. + +`-l LINKER' +`--linker=LINKER' + Use LINKER for any linking. LINKER can be an absolute or a + relative pathname. + +`-h' +`--help' + Prints a usage summary. + +`-V' +`--version' + Prints the version number for `nlmconv'. + + +File: binutils.info, Node: windmc, Next: dlltool, Prev: windres, Up: Top + +12 windmc +********* + +`windmc' may be used to generator Windows message resources. + + _Warning:_ `windmc' is not always built as part of the binary + utilities, since it is only useful for Windows targets. + + windmc [options] input-file + + `windmc' reads message definitions from an input file (.mc) and +translate them into a set of output files. The output files may be of +four kinds: + +`h' + A C header file containing the message definitions. + +`rc' + A resource file compilable by the `windres' tool. + +`bin' + One or more binary files containing the resource data for a + specific message language. + +`dbg' + A C include file that maps message id's to their symbolic name. + + The exact description of these different formats is available in +documentation from Microsoft. + + When `windmc' converts from the `mc' format to the `bin' format, +`rc', `h', and optional `dbg' it is acting like the Windows Message +Compiler. + +`-a' +`--ascii_in' + Specifies that the input file specified is ANSI. This is the + default behaviour. + +`-A' +`--ascii_out' + Specifies that messages in the output `bin' files should be in ANSI + format. + +`-b' +`--binprefix' + Specifies that `bin' filenames should have to be prefixed by the + basename of the source file. + +`-c' +`--customflag' + Sets the customer bit in all message id's. + +`-C CODEPAGE' +`--codepage_in CODEPAGE' + Sets the default codepage to be used to convert input file to + UTF16. The default is ocdepage 1252. + +`-d' +`--decimal_values' + Outputs the constants in the header file in decimal. Default is + using hexadecimal output. + +`-e EXT' +`--extension EXT' + The extension for the header file. The default is .h extension. + +`-F TARGET' +`--target TARGET' + Specify the BFD format to use for a bin file as output. This is a + BFD target name; you can use the `--help' option to see a list of + supported targets. Normally `windmc' will use the default format, + which is the first one listed by the `--help' option. *Note + Target Selection::. + +`-h PATH' +`--headerdir PATH' + The target directory of the generated header file. The default is + the current directory. + +`-H' +`--help' + Displays a list of command line options and then exits. + +`-m CHARACTERS' +`--maxlength CHARACTERS' + Instructs `windmc' to generate a warning if the length of any + message exceeds the number specified. + +`-n' +`--nullterminate' + Terminate message text in `bin' files by zero. By default they are + terminated by CR/LF. + +`-o' +`--hresult_use' + Not yet implemented. Instructs `windmc' to generate an OLE2 header + file, using HRESULT definitions. Status codes are used if the flag + is not specified. + +`-O CODEPAGE' +`--codepage_out CODEPAGE' + Sets the default codepage to be used to output text files. The + default is ocdepage 1252. + +`-r PATH' +`--rcdir PATH' + The target directory for the generated `rc' script and the + generated `bin' files that the resource compiler script includes. + The default is the current directory. + +`-u' +`--unicode_in' + Specifies that the input file is UTF16. + +`-U' +`--unicode_out' + Specifies that messages in the output `bin' file should be in UTF16 + format. This is the default behaviour. + +`-v' + +`--verbose' + Enable verbose mode. + +`-V' + +`--version' + Prints the version number for `windmc'. + +`-x PATH' +`--xdgb PATH' + The path of the `dbg' C include file that maps message id's to the + symbolic name. No such file is generated without specifying the + switch. + + +File: binutils.info, Node: windres, Next: windmc, Prev: nlmconv, Up: Top + +13 windres +********** + +`windres' may be used to manipulate Windows resources. + + _Warning:_ `windres' is not always built as part of the binary + utilities, since it is only useful for Windows targets. + + windres [options] [input-file] [output-file] + + `windres' reads resources from an input file and copies them into an +output file. Either file may be in one of three formats: + +`rc' + A text format read by the Resource Compiler. + +`res' + A binary format generated by the Resource Compiler. + +`coff' + A COFF object or executable. + + The exact description of these different formats is available in +documentation from Microsoft. + + When `windres' converts from the `rc' format to the `res' format, it +is acting like the Windows Resource Compiler. When `windres' converts +from the `res' format to the `coff' format, it is acting like the +Windows `CVTRES' program. + + When `windres' generates an `rc' file, the output is similar but not +identical to the format expected for the input. When an input `rc' +file refers to an external filename, an output `rc' file will instead +include the file contents. + + If the input or output format is not specified, `windres' will guess +based on the file name, or, for the input file, the file contents. A +file with an extension of `.rc' will be treated as an `rc' file, a file +with an extension of `.res' will be treated as a `res' file, and a file +with an extension of `.o' or `.exe' will be treated as a `coff' file. + + If no output file is specified, `windres' will print the resources +in `rc' format to standard output. + + The normal use is for you to write an `rc' file, use `windres' to +convert it to a COFF object file, and then link the COFF file into your +application. This will make the resources described in the `rc' file +available to Windows. + +`-i FILENAME' +`--input FILENAME' + The name of the input file. If this option is not used, then + `windres' will use the first non-option argument as the input file + name. If there are no non-option arguments, then `windres' will + read from standard input. `windres' can not read a COFF file from + standard input. + +`-o FILENAME' +`--output FILENAME' + The name of the output file. If this option is not used, then + `windres' will use the first non-option argument, after any used + for the input file name, as the output file name. If there is no + non-option argument, then `windres' will write to standard output. + `windres' can not write a COFF file to standard output. Note, for + compatibility with `rc' the option `-fo' is also accepted, but its + use is not recommended. + +`-J FORMAT' +`--input-format FORMAT' + The input format to read. FORMAT may be `res', `rc', or `coff'. + If no input format is specified, `windres' will guess, as + described above. + +`-O FORMAT' +`--output-format FORMAT' + The output format to generate. FORMAT may be `res', `rc', or + `coff'. If no output format is specified, `windres' will guess, + as described above. + +`-F TARGET' +`--target TARGET' + Specify the BFD format to use for a COFF file as input or output. + This is a BFD target name; you can use the `--help' option to see + a list of supported targets. Normally `windres' will use the + default format, which is the first one listed by the `--help' + option. *Note Target Selection::. + +`--preprocessor PROGRAM' + When `windres' reads an `rc' file, it runs it through the C + preprocessor first. This option may be used to specify the + preprocessor to use, including any leading arguments. The default + preprocessor argument is `gcc -E -xc-header -DRC_INVOKED'. + +`-I DIRECTORY' +`--include-dir DIRECTORY' + Specify an include directory to use when reading an `rc' file. + `windres' will pass this to the preprocessor as an `-I' option. + `windres' will also search this directory when looking for files + named in the `rc' file. If the argument passed to this command + matches any of the supported FORMATS (as described in the `-J' + option), it will issue a deprecation warning, and behave just like + the `-J' option. New programs should not use this behaviour. If a + directory happens to match a FORMAT, simple prefix it with `./' to + disable the backward compatibility. + +`-D TARGET' +`--define SYM[=VAL]' + Specify a `-D' option to pass to the preprocessor when reading an + `rc' file. + +`-U TARGET' +`--undefine SYM' + Specify a `-U' option to pass to the preprocessor when reading an + `rc' file. + +`-r' + Ignored for compatibility with rc. + +`-v' + Enable verbose mode. This tells you what the preprocessor is if + you didn't specify one. + +`-c VAL' + +`--codepage VAL' + Specify the default codepage to use when reading an `rc' file. + VAL should be a hexadecimal prefixed by `0x' or decimal codepage + code. The valid range is from zero up to 0xffff, but the validity + of the codepage is host and configuration dependent. + +`-l VAL' + +`--language VAL' + Specify the default language to use when reading an `rc' file. + VAL should be a hexadecimal language code. The low eight bits are + the language, and the high eight bits are the sublanguage. + +`--use-temp-file' + Use a temporary file to instead of using popen to read the output + of the preprocessor. Use this option if the popen implementation + is buggy on the host (eg., certain non-English language versions + of Windows 95 and Windows 98 are known to have buggy popen where + the output will instead go the console). + +`--no-use-temp-file' + Use popen, not a temporary file, to read the output of the + preprocessor. This is the default behaviour. + +`-h' + +`--help' + Prints a usage summary. + +`-V' + +`--version' + Prints the version number for `windres'. + +`--yydebug' + If `windres' is compiled with `YYDEBUG' defined as `1', this will + turn on parser debugging. + + +File: binutils.info, Node: dlltool, Next: Common Options, Prev: windmc, Up: Top + +14 dlltool +********** + +`dlltool' is used to create the files needed to create dynamic link +libraries (DLLs) on systems which understand PE format image files such +as Windows. A DLL contains an export table which contains information +that the runtime loader needs to resolve references from a referencing +program. + + The export table is generated by this program by reading in a `.def' +file or scanning the `.a' and `.o' files which will be in the DLL. A +`.o' file can contain information in special `.drectve' sections with +export information. + + _Note:_ `dlltool' is not always built as part of the binary + utilities, since it is only useful for those targets which support + DLLs. + + dlltool [`-d'|`--input-def' DEF-FILE-NAME] + [`-b'|`--base-file' BASE-FILE-NAME] + [`-e'|`--output-exp' EXPORTS-FILE-NAME] + [`-z'|`--output-def' DEF-FILE-NAME] + [`-l'|`--output-lib' LIBRARY-FILE-NAME] + [`-y'|`--output-delaylib' LIBRARY-FILE-NAME] + [`--export-all-symbols'] [`--no-export-all-symbols'] + [`--exclude-symbols' LIST] + [`--no-default-excludes'] + [`-S'|`--as' PATH-TO-ASSEMBLER] [`-f'|`--as-flags' OPTIONS] + [`-D'|`--dllname' NAME] [`-m'|`--machine' MACHINE] + [`-a'|`--add-indirect'] + [`-U'|`--add-underscore'] [`--add-stdcall-underscore'] + [`-k'|`--kill-at'] [`-A'|`--add-stdcall-alias'] + [`-p'|`--ext-prefix-alias' PREFIX] + [`-x'|`--no-idata4'] [`-c'|`--no-idata5'] + [`--use-nul-prefixed-import-tables'] + [`-I'|`--identify' LIBRARY-FILE-NAME] [`--identify-strict'] + [`-i'|`--interwork'] + [`-n'|`--nodelete'] [`-t'|`--temp-prefix' PREFIX] + [`-v'|`--verbose'] + [`-h'|`--help'] [`-V'|`--version'] + [object-file ...] + + `dlltool' reads its inputs, which can come from the `-d' and `-b' +options as well as object files specified on the command line. It then +processes these inputs and if the `-e' option has been specified it +creates a exports file. If the `-l' option has been specified it +creates a library file and if the `-z' option has been specified it +creates a def file. Any or all of the `-e', `-l' and `-z' options can +be present in one invocation of dlltool. + + When creating a DLL, along with the source for the DLL, it is +necessary to have three other files. `dlltool' can help with the +creation of these files. + + The first file is a `.def' file which specifies which functions are +exported from the DLL, which functions the DLL imports, and so on. This +is a text file and can be created by hand, or `dlltool' can be used to +create it using the `-z' option. In this case `dlltool' will scan the +object files specified on its command line looking for those functions +which have been specially marked as being exported and put entries for +them in the `.def' file it creates. + + In order to mark a function as being exported from a DLL, it needs to +have an `-export:<name_of_function>' entry in the `.drectve' section of +the object file. This can be done in C by using the asm() operator: + + asm (".section .drectve"); + asm (".ascii \"-export:my_func\""); + + int my_func (void) { ... } + + The second file needed for DLL creation is an exports file. This +file is linked with the object files that make up the body of the DLL +and it handles the interface between the DLL and the outside world. +This is a binary file and it can be created by giving the `-e' option to +`dlltool' when it is creating or reading in a `.def' file. + + The third file needed for DLL creation is the library file that +programs will link with in order to access the functions in the DLL (an +`import library'). This file can be created by giving the `-l' option +to dlltool when it is creating or reading in a `.def' file. + + If the `-y' option is specified, dlltool generates a delay-import +library that can be used instead of the normal import library to allow +a program to link to the dll only as soon as an imported function is +called for the first time. The resulting executable will need to be +linked to the static delayimp library containing __delayLoadHelper2(), +which in turn will import LoadLibraryA and GetProcAddress from kernel32. + + `dlltool' builds the library file by hand, but it builds the exports +file by creating temporary files containing assembler statements and +then assembling these. The `-S' command line option can be used to +specify the path to the assembler that dlltool will use, and the `-f' +option can be used to pass specific flags to that assembler. The `-n' +can be used to prevent dlltool from deleting these temporary assembler +files when it is done, and if `-n' is specified twice then this will +prevent dlltool from deleting the temporary object files it used to +build the library. + + Here is an example of creating a DLL from a source file `dll.c' and +also creating a program (from an object file called `program.o') that +uses that DLL: + + gcc -c dll.c + dlltool -e exports.o -l dll.lib dll.o + gcc dll.o exports.o -o dll.dll + gcc program.o dll.lib -o program + + `dlltool' may also be used to query an existing import library to +determine the name of the DLL to which it is associated. See the +description of the `-I' or `--identify' option. + + The command line options have the following meanings: + +`-d FILENAME' +`--input-def FILENAME' + Specifies the name of a `.def' file to be read in and processed. + +`-b FILENAME' +`--base-file FILENAME' + Specifies the name of a base file to be read in and processed. The + contents of this file will be added to the relocation section in + the exports file generated by dlltool. + +`-e FILENAME' +`--output-exp FILENAME' + Specifies the name of the export file to be created by dlltool. + +`-z FILENAME' +`--output-def FILENAME' + Specifies the name of the `.def' file to be created by dlltool. + +`-l FILENAME' +`--output-lib FILENAME' + Specifies the name of the library file to be created by dlltool. + +`-y FILENAME' +`--output-delaylib FILENAME' + Specifies the name of the delay-import library file to be created + by dlltool. + +`--export-all-symbols' + Treat all global and weak defined symbols found in the input object + files as symbols to be exported. There is a small list of symbols + which are not exported by default; see the `--no-default-excludes' + option. You may add to the list of symbols to not export by using + the `--exclude-symbols' option. + +`--no-export-all-symbols' + Only export symbols explicitly listed in an input `.def' file or in + `.drectve' sections in the input object files. This is the default + behaviour. The `.drectve' sections are created by `dllexport' + attributes in the source code. + +`--exclude-symbols LIST' + Do not export the symbols in LIST. This is a list of symbol names + separated by comma or colon characters. The symbol names should + not contain a leading underscore. This is only meaningful when + `--export-all-symbols' is used. + +`--no-default-excludes' + When `--export-all-symbols' is used, it will by default avoid + exporting certain special symbols. The current list of symbols to + avoid exporting is `DllMain@12', `DllEntryPoint@0', `impure_ptr'. + You may use the `--no-default-excludes' option to go ahead and + export these special symbols. This is only meaningful when + `--export-all-symbols' is used. + +`-S PATH' +`--as PATH' + Specifies the path, including the filename, of the assembler to be + used to create the exports file. + +`-f OPTIONS' +`--as-flags OPTIONS' + Specifies any specific command line options to be passed to the + assembler when building the exports file. This option will work + even if the `-S' option is not used. This option only takes one + argument, and if it occurs more than once on the command line, + then later occurrences will override earlier occurrences. So if + it is necessary to pass multiple options to the assembler they + should be enclosed in double quotes. + +`-D NAME' +`--dll-name NAME' + Specifies the name to be stored in the `.def' file as the name of + the DLL when the `-e' option is used. If this option is not + present, then the filename given to the `-e' option will be used + as the name of the DLL. + +`-m MACHINE' +`-machine MACHINE' + Specifies the type of machine for which the library file should be + built. `dlltool' has a built in default type, depending upon how + it was created, but this option can be used to override that. + This is normally only useful when creating DLLs for an ARM + processor, when the contents of the DLL are actually encode using + Thumb instructions. + +`-a' +`--add-indirect' + Specifies that when `dlltool' is creating the exports file it + should add a section which allows the exported functions to be + referenced without using the import library. Whatever the hell + that means! + +`-U' +`--add-underscore' + Specifies that when `dlltool' is creating the exports file it + should prepend an underscore to the names of _all_ exported + symbols. + +`--add-stdcall-underscore' + Specifies that when `dlltool' is creating the exports file it + should prepend an underscore to the names of exported _stdcall_ + functions. Variable names and non-stdcall function names are not + modified. This option is useful when creating GNU-compatible + import libs for third party DLLs that were built with MS-Windows + tools. + +`-k' +`--kill-at' + Specifies that when `dlltool' is creating the exports file it + should not append the string `@ <number>'. These numbers are + called ordinal numbers and they represent another way of accessing + the function in a DLL, other than by name. + +`-A' +`--add-stdcall-alias' + Specifies that when `dlltool' is creating the exports file it + should add aliases for stdcall symbols without `@ <number>' in + addition to the symbols with `@ <number>'. + +`-p' +`--ext-prefix-alias PREFIX' + Causes `dlltool' to create external aliases for all DLL imports + with the specified prefix. The aliases are created for both + external and import symbols with no leading underscore. + +`-x' +`--no-idata4' + Specifies that when `dlltool' is creating the exports and library + files it should omit the `.idata4' section. This is for + compatibility with certain operating systems. + +`--use-nul-prefixed-import-tables' + Specifies that when `dlltool' is creating the exports and library + files it should prefix the `.idata4' and `.idata5' by zero an + element. This emulates old gnu import library generation of + `dlltool'. By default this option is turned off. + +`-c' +`--no-idata5' + Specifies that when `dlltool' is creating the exports and library + files it should omit the `.idata5' section. This is for + compatibility with certain operating systems. + +`-I FILENAME' +`--identify FILENAME' + Specifies that `dlltool' should inspect the import library + indicated by FILENAME and report, on `stdout', the name(s) of the + associated DLL(s). This can be performed in addition to any other + operations indicated by the other options and arguments. + `dlltool' fails if the import library does not exist or is not + actually an import library. See also `--identify-strict'. + +`--identify-strict' + Modifies the behavior of the `--identify' option, such that an + error is reported if FILENAME is associated with more than one DLL. + +`-i' +`--interwork' + Specifies that `dlltool' should mark the objects in the library + file and exports file that it produces as supporting interworking + between ARM and Thumb code. + +`-n' +`--nodelete' + Makes `dlltool' preserve the temporary assembler files it used to + create the exports file. If this option is repeated then dlltool + will also preserve the temporary object files it uses to create + the library file. + +`-t PREFIX' +`--temp-prefix PREFIX' + Makes `dlltool' use PREFIX when constructing the names of + temporary assembler and object files. By default, the temp file + prefix is generated from the pid. + +`-v' +`--verbose' + Make dlltool describe what it is doing. + +`-h' +`--help' + Displays a list of command line options and then exits. + +`-V' +`--version' + Displays dlltool's version number and then exits. + + +* Menu: + +* def file format:: The format of the dlltool `.def' file + + +File: binutils.info, Node: def file format, Up: dlltool + +14.1 The format of the `dlltool' `.def' file +============================================ + +A `.def' file contains any number of the following commands: + +`NAME' NAME `[ ,' BASE `]' + The result is going to be named NAME`.exe'. + +`LIBRARY' NAME `[ ,' BASE `]' + The result is going to be named NAME`.dll'. + +`EXPORTS ( ( (' NAME1 `[ = ' NAME2 `] ) | ( ' NAME1 `=' MODULE-NAME `.' EXTERNAL-NAME `) )' + +`[' INTEGER `] [ NONAME ] [ CONSTANT ] [ DATA ] [ PRIVATE ] ) *' + Declares NAME1 as an exported symbol from the DLL, with optional + ordinal number INTEGER, or declares NAME1 as an alias (forward) of + the function EXTERNAL-NAME in the DLL MODULE-NAME. + +`IMPORTS ( (' INTERNAL-NAME `=' MODULE-NAME `.' INTEGER `) | [' INTERNAL-NAME `= ]' MODULE-NAME `.' EXTERNAL-NAME `) ) *' + Declares that EXTERNAL-NAME or the exported function whose ordinal + number is INTEGER is to be imported from the file MODULE-NAME. If + INTERNAL-NAME is specified then this is the name that the imported + function will be referred to in the body of the DLL. + +`DESCRIPTION' STRING + Puts STRING into the output `.exp' file in the `.rdata' section. + +`STACKSIZE' NUMBER-RESERVE `[, ' NUMBER-COMMIT `]' + +`HEAPSIZE' NUMBER-RESERVE `[, ' NUMBER-COMMIT `]' + Generates `--stack' or `--heap' NUMBER-RESERVE,NUMBER-COMMIT in + the output `.drectve' section. The linker will see this and act + upon it. + +`CODE' ATTR `+' + +`DATA' ATTR `+' + +`SECTIONS (' SECTION-NAME ATTR` + ) *' + Generates `--attr' SECTION-NAME ATTR in the output `.drectve' + section, where ATTR is one of `READ', `WRITE', `EXECUTE' or + `SHARED'. The linker will see this and act upon it. + + + +File: binutils.info, Node: readelf, Next: size, Prev: ranlib, Up: Top + +15 readelf +********** + + readelf [`-a'|`--all'] + [`-h'|`--file-header'] + [`-l'|`--program-headers'|`--segments'] + [`-S'|`--section-headers'|`--sections'] + [`-g'|`--section-groups'] + [`-t'|`--section-details'] + [`-e'|`--headers'] + [`-s'|`--syms'|`--symbols'] + [`-n'|`--notes'] + [`-r'|`--relocs'] + [`-u'|`--unwind'] + [`-d'|`--dynamic'] + [`-V'|`--version-info'] + [`-A'|`--arch-specific'] + [`-D'|`--use-dynamic'] + [`-x' <number or name>|`--hex-dump='<number or name>] + [`-p' <number or name>|`--string-dump='<number or name>] + [`-R' <number or name>|`--relocated-dump='<number or name>] + [`-c'|`--archive-index'] + [`-w[lLiaprmfFsoR]'| + `--debug-dump'[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]] + [`-I'|`-histogram'] + [`-v'|`--version'] + [`-W'|`--wide'] + [`-H'|`--help'] + ELFFILE... + + `readelf' displays information about one or more ELF format object +files. The options control what particular information to display. + + ELFFILE... are the object files to be examined. 32-bit and 64-bit +ELF files are supported, as are archives containing ELF files. + + This program performs a similar function to `objdump' but it goes +into more detail and it exists independently of the BFD library, so if +there is a bug in BFD then readelf will not be affected. + + The long and short forms of options, shown here as alternatives, are +equivalent. At least one option besides `-v' or `-H' must be given. + +`-a' +`--all' + Equivalent to specifying `--file-header', `--program-headers', + `--sections', `--symbols', `--relocs', `--dynamic', `--notes' and + `--version-info'. + +`-h' +`--file-header' + Displays the information contained in the ELF header at the start + of the file. + +`-l' +`--program-headers' +`--segments' + Displays the information contained in the file's segment headers, + if it has any. + +`-S' +`--sections' +`--section-headers' + Displays the information contained in the file's section headers, + if it has any. + +`-g' +`--section-groups' + Displays the information contained in the file's section groups, + if it has any. + +`-t' +`--section-details' + Displays the detailed section information. Implies `-S'. + +`-s' +`--symbols' +`--syms' + Displays the entries in symbol table section of the file, if it + has one. + +`-e' +`--headers' + Display all the headers in the file. Equivalent to `-h -l -S'. + +`-n' +`--notes' + Displays the contents of the NOTE segments and/or sections, if any. + +`-r' +`--relocs' + Displays the contents of the file's relocation section, if it has + one. + +`-u' +`--unwind' + Displays the contents of the file's unwind section, if it has one. + Only the unwind sections for IA64 ELF files are currently + supported. + +`-d' +`--dynamic' + Displays the contents of the file's dynamic section, if it has one. + +`-V' +`--version-info' + Displays the contents of the version sections in the file, it they + exist. + +`-A' +`--arch-specific' + Displays architecture-specific information in the file, if there + is any. + +`-D' +`--use-dynamic' + When displaying symbols, this option makes `readelf' use the + symbol table in the file's dynamic section, rather than the one in + the symbols section. + +`-x <number or name>' +`--hex-dump=<number or name>' + Displays the contents of the indicated section as a hexadecimal + bytes. A number identifies a particular section by index in the + section table; any other string identifies all sections with that + name in the object file. + +`-R <number or name>' +`--relocated-dump=<number or name>' + Displays the contents of the indicated section as a hexadecimal + bytes. A number identifies a particular section by index in the + section table; any other string identifies all sections with that + name in the object file. The contents of the section will be + relocated before they are displayed. + +`-p <number or name>' +`--string-dump=<number or name>' + Displays the contents of the indicated section as printable + strings. A number identifies a particular section by index in the + section table; any other string identifies all sections with that + name in the object file. + +`-c' +`--archive-index' + Displays the file symbol index infomation contained in the header + part of binary archives. Performs the same function as the `t' + command to `ar', but without using the BFD library. *Note ar::. + +`-w[lLiaprmfFsoR]' +`--debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]' + Displays the contents of the debug sections in the file, if any are + present. If one of the optional letters or words follows the + switch then only data found in those specific sections will be + dumped. + + Note: the `=decodedline' option will display the interpreted + contents of a .debug_line section whereas the `=rawline' option + dumps the contents in a raw format. + +`-I' +`--histogram' + Display a histogram of bucket list lengths when displaying the + contents of the symbol tables. + +`-v' +`--version' + Display the version number of readelf. + +`-W' +`--wide' + Don't break output lines to fit into 80 columns. By default + `readelf' breaks section header and segment listing lines for + 64-bit ELF files, so that they fit into 80 columns. This option + causes `readelf' to print each section header resp. each segment + one a single line, which is far more readable on terminals wider + than 80 columns. + +`-H' +`--help' + Display the command line options understood by `readelf'. + + + +File: binutils.info, Node: Common Options, Next: Selecting the Target System, Prev: dlltool, Up: Top + +16 Common Options +***************** + +The following command-line options are supported by all of the programs +described in this manual. + +`@FILE' + Read command-line options from FILE. The options read are + inserted in place of the original @FILE option. If FILE does not + exist, or cannot be read, then the option will be treated + literally, and not removed. + + Options in FILE are separated by whitespace. A whitespace + character may be included in an option by surrounding the entire + option in either single or double quotes. Any character + (including a backslash) may be included by prefixing the character + to be included with a backslash. The FILE may itself contain + additional @FILE options; any such options will be processed + recursively. + +`--help' + Display the command-line options supported by the program. + +`--version' + Display the version number of the program. + + + +File: binutils.info, Node: Selecting the Target System, Next: Reporting Bugs, Prev: Common Options, Up: Top + +17 Selecting the Target System +****************************** + +You can specify two aspects of the target system to the GNU binary file +utilities, each in several ways: + + * the target + + * the architecture + + In the following summaries, the lists of ways to specify values are +in order of decreasing precedence. The ways listed first override those +listed later. + + The commands to list valid values only list the values for which the +programs you are running were configured. If they were configured with +`--enable-targets=all', the commands list most of the available values, +but a few are left out; not all targets can be configured in at once +because some of them can only be configured "native" (on hosts with the +same type as the target system). + +* Menu: + +* Target Selection:: +* Architecture Selection:: + + +File: binutils.info, Node: Target Selection, Next: Architecture Selection, Up: Selecting the Target System + +17.1 Target Selection +===================== + +A "target" is an object file format. A given target may be supported +for multiple architectures (*note Architecture Selection::). A target +selection may also have variations for different operating systems or +architectures. + + The command to list valid target values is `objdump -i' (the first +column of output contains the relevant information). + + Some sample values are: `a.out-hp300bsd', `ecoff-littlemips', +`a.out-sunos-big'. + + You can also specify a target using a configuration triplet. This is +the same sort of name that is passed to `configure' to specify a +target. When you use a configuration triplet as an argument, it must be +fully canonicalized. You can see the canonical version of a triplet by +running the shell script `config.sub' which is included with the +sources. + + Some sample configuration triplets are: `m68k-hp-bsd', +`mips-dec-ultrix', `sparc-sun-sunos'. + +`objdump' Target +---------------- + +Ways to specify: + + 1. command line option: `-b' or `--target' + + 2. environment variable `GNUTARGET' + + 3. deduced from the input file + +`objcopy' and `strip' Input Target +---------------------------------- + +Ways to specify: + + 1. command line options: `-I' or `--input-target', or `-F' or + `--target' + + 2. environment variable `GNUTARGET' + + 3. deduced from the input file + +`objcopy' and `strip' Output Target +----------------------------------- + +Ways to specify: + + 1. command line options: `-O' or `--output-target', or `-F' or + `--target' + + 2. the input target (see "`objcopy' and `strip' Input Target" above) + + 3. environment variable `GNUTARGET' + + 4. deduced from the input file + +`nm', `size', and `strings' Target +---------------------------------- + +Ways to specify: + + 1. command line option: `--target' + + 2. environment variable `GNUTARGET' + + 3. deduced from the input file + + +File: binutils.info, Node: Architecture Selection, Prev: Target Selection, Up: Selecting the Target System + +17.2 Architecture Selection +=========================== + +An "architecture" is a type of CPU on which an object file is to run. +Its name may contain a colon, separating the name of the processor +family from the name of the particular CPU. + + The command to list valid architecture values is `objdump -i' (the +second column contains the relevant information). + + Sample values: `m68k:68020', `mips:3000', `sparc'. + +`objdump' Architecture +---------------------- + +Ways to specify: + + 1. command line option: `-m' or `--architecture' + + 2. deduced from the input file + +`objcopy', `nm', `size', `strings' Architecture +----------------------------------------------- + +Ways to specify: + + 1. deduced from the input file + + +File: binutils.info, Node: Reporting Bugs, Next: GNU Free Documentation License, Prev: Selecting the Target System, Up: Top + +18 Reporting Bugs +***************** + +Your bug reports play an essential role in making the binary utilities +reliable. + + Reporting a bug may help you by bringing a solution to your problem, +or it may not. But in any case the principal function of a bug report +is to help the entire community by making the next version of the binary +utilities work better. Bug reports are your contribution to their +maintenance. + + In order for a bug report to serve its purpose, you must include the +information that enables us to fix the bug. + +* Menu: + +* Bug Criteria:: Have you found a bug? +* Bug Reporting:: How to report bugs + + +File: binutils.info, Node: Bug Criteria, Next: Bug Reporting, Up: Reporting Bugs + +18.1 Have You Found a Bug? +========================== + +If you are not sure whether you have found a bug, here are some +guidelines: + + * If a binary utility gets a fatal signal, for any input whatever, + that is a bug. Reliable utilities never crash. + + * If a binary utility produces an error message for valid input, + that is a bug. + + * If you are an experienced user of binary utilities, your + suggestions for improvement are welcome in any case. + + +File: binutils.info, Node: Bug Reporting, Prev: Bug Criteria, Up: Reporting Bugs + +18.2 How to Report Bugs +======================= + +A number of companies and individuals offer support for GNU products. +If you obtained the binary utilities from a support organization, we +recommend you contact that organization first. + + You can find contact information for many support companies and +individuals in the file `etc/SERVICE' in the GNU Emacs distribution. + + In any event, we also recommend that you send bug reports for the +binary utilities to `http://www.sourceware.org/bugzilla/'. + + The fundamental principle of reporting bugs usefully is this: +*report all the facts*. If you are not sure whether to state a fact or +leave it out, state it! + + Often people omit facts because they think they know what causes the +problem and assume that some details do not matter. Thus, you might +assume that the name of a file you use in an example does not matter. +Well, probably it does not, but one cannot be sure. Perhaps the bug is +a stray memory reference which happens to fetch from the location where +that pathname is stored in memory; perhaps, if the pathname were +different, the contents of that location would fool the utility into +doing the right thing despite the bug. Play it safe and give a +specific, complete example. That is the easiest thing for you to do, +and the most helpful. + + Keep in mind that the purpose of a bug report is to enable us to fix +the bug if it is new to us. Therefore, always write your bug reports +on the assumption that the bug has not been reported previously. + + Sometimes people give a few sketchy facts and ask, "Does this ring a +bell?" This cannot help us fix a bug, so it is basically useless. We +respond by asking for enough details to enable us to investigate. You +might as well expedite matters by sending them to begin with. + + To enable us to fix the bug, you should include all these things: + + * The version of the utility. Each utility announces it if you + start it with the `--version' argument. + + Without this, we will not know whether there is any point in + looking for the bug in the current version of the binary utilities. + + * Any patches you may have applied to the source, including any + patches made to the `BFD' library. + + * The type of machine you are using, and the operating system name + and version number. + + * What compiler (and its version) was used to compile the + utilities--e.g. "`gcc-2.7'". + + * The command arguments you gave the utility to observe the bug. To + guarantee you will not omit something important, list them all. A + copy of the Makefile (or the output from make) is sufficient. + + If we were to try to guess the arguments, we would probably guess + wrong and then we might not encounter the bug. + + * A complete input file, or set of input files, that will reproduce + the bug. If the utility is reading an object file or files, then + it is generally most helpful to send the actual object files. + + If the source files were produced exclusively using GNU programs + (e.g., `gcc', `gas', and/or the GNU `ld'), then it may be OK to + send the source files rather than the object files. In this case, + be sure to say exactly what version of `gcc', or whatever, was + used to produce the object files. Also say how `gcc', or + whatever, was configured. + + * A description of what behavior you observe that you believe is + incorrect. For example, "It gets a fatal signal." + + Of course, if the bug is that the utility gets a fatal signal, + then we will certainly notice it. But if the bug is incorrect + output, we might not notice unless it is glaringly wrong. You + might as well not give us a chance to make a mistake. + + Even if the problem you experience is a fatal signal, you should + still say so explicitly. Suppose something strange is going on, + such as your copy of the utility is out of sync, or you have + encountered a bug in the C library on your system. (This has + happened!) Your copy might crash and ours would not. If you told + us to expect a crash, then when ours fails to crash, we would know + that the bug was not happening for us. If you had not told us to + expect a crash, then we would not be able to draw any conclusion + from our observations. + + * If you wish to suggest changes to the source, send us context + diffs, as generated by `diff' with the `-u', `-c', or `-p' option. + Always send diffs from the old file to the new file. If you wish + to discuss something in the `ld' source, refer to it by context, + not by line number. + + The line numbers in our development sources will not match those + in your sources. Your line numbers would convey no useful + information to us. + + Here are some things that are not necessary: + + * A description of the envelope of the bug. + + Often people who encounter a bug spend a lot of time investigating + which changes to the input file will make the bug go away and which + changes will not affect it. + + This is often time consuming and not very useful, because the way + we will find the bug is by running a single example under the + debugger with breakpoints, not by pure deduction from a series of + examples. We recommend that you save your time for something else. + + Of course, if you can find a simpler example to report _instead_ + of the original one, that is a convenience for us. Errors in the + output will be easier to spot, running under the debugger will take + less time, and so on. + + However, simplification is not vital; if you do not want to do + this, report the bug anyway and send us the entire test case you + used. + + * A patch for the bug. + + A patch for the bug does help us if it is a good one. But do not + omit the necessary information, such as the test case, on the + assumption that a patch is all we need. We might see problems + with your patch and decide to fix the problem another way, or we + might not understand it at all. + + Sometimes with programs as complicated as the binary utilities it + is very hard to construct an example that will make the program + follow a certain path through the code. If you do not send us the + example, we will not be able to construct one, so we will not be + able to verify that the bug is fixed. + + And if we cannot understand what bug you are trying to fix, or why + your patch should be an improvement, we will not install it. A + test case will help us to understand. + + * A guess about what the bug is or what it depends on. + + Such guesses are usually wrong. Even we cannot guess right about + such things without first using the debugger to find the facts. + + +File: binutils.info, Node: GNU Free Documentation License, Next: Binutils Index, Prev: Reporting Bugs, Up: Top + +Appendix A GNU Free Documentation License +***************************************** + + Version 1.3, 3 November 2008 + + Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. + `http://fsf.org/' + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document "free" in the sense of freedom: to + assure everyone the effective freedom to copy and redistribute it, + with or without modifying it, either commercially or + noncommercially. Secondarily, this License preserves for the + author and publisher a way to get credit for their work, while not + being considered responsible for modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. + We recommend this License principally for works whose purpose is + instruction or reference. + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, + that contains a notice placed by the copyright holder saying it + can be distributed under the terms of this License. Such a notice + grants a world-wide, royalty-free license, unlimited in duration, + to use that work under the conditions stated herein. The + "Document", below, refers to any such manual or work. Any member + of the public is a licensee, and is addressed as "you". You + accept the license if you copy, modify or distribute the work in a + way requiring permission under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section + of the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall + subject (or to related matters) and contains nothing that could + fall directly within that overall subject. (Thus, if the Document + is in part a textbook of mathematics, a Secondary Section may not + explain any mathematics.) The relationship could be a matter of + historical connection with the subject or with related matters, or + of legal, commercial, philosophical, ethical or political position + regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in + the notice that says that the Document is released under this + License. If a section does not fit the above definition of + Secondary then it is not allowed to be designated as Invariant. + The Document may contain zero Invariant Sections. If the Document + does not identify any Invariant Sections then there are none. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. A + Front-Cover Text may be at most 5 words, and a Back-Cover Text may + be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images + composed of pixels) generic paint programs or (for drawings) some + widely available drawing editor, and that is suitable for input to + text formatters or for automatic translation to a variety of + formats suitable for input to text formatters. A copy made in an + otherwise Transparent file format whose markup, or absence of + markup, has been arranged to thwart or discourage subsequent + modification by readers is not Transparent. An image format is + not Transparent if used for any substantial amount of text. A + copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and + standard-conforming simple HTML, PostScript or PDF designed for + human modification. Examples of transparent image formats include + PNG, XCF and JPG. Opaque formats include proprietary formats that + can be read and edited only by proprietary word processors, SGML or + XML for which the DTD and/or processing tools are not generally + available, and the machine-generated HTML, PostScript or PDF + produced by some word processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + The "publisher" means any person or entity that distributes copies + of the Document to the public. + + A section "Entitled XYZ" means a named subunit of the Document + whose title either is precisely XYZ or contains XYZ in parentheses + following text that translates XYZ in another language. (Here XYZ + stands for a specific section name mentioned below, such as + "Acknowledgements", "Dedications", "Endorsements", or "History".) + To "Preserve the Title" of such a section when you modify the + Document means that it remains a section "Entitled XYZ" according + to this definition. + + The Document may include Warranty Disclaimers next to the notice + which states that this License applies to the Document. These + Warranty Disclaimers are considered to be included by reference in + this License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and + has no effect on the meaning of this License. + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow + the conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + + 3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly + have printed covers) of the Document, numbering more than 100, and + the Document's license notice requires Cover Texts, you must + enclose the copies in covers that carry, clearly and legibly, all + these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the + title equally prominent and visible. You may add other material + on the covers in addition. Copying with changes limited to the + covers, as long as they preserve the title of the Document and + satisfy these conditions, can be treated as verbatim copying in + other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a + machine-readable Transparent copy along with each Opaque copy, or + state in or with each Opaque copy a computer-network location from + which the general network-using public has access to download + using public-standard network protocols a complete Transparent + copy of the Document, free of added material. If you use the + latter option, you must take reasonably prudent steps, when you + begin distribution of Opaque copies in quantity, to ensure that + this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you + distribute an Opaque copy (directly or through your agents or + retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of + copies, to give them a chance to provide you with an updated + version of the Document. + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with + the Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version to + whoever possesses a copy of it. In addition, you must do these + things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of + previous versions (which should, if there were any, be listed + in the History section of the Document). You may use the + same title as a previous version if the original publisher of + that version gives permission. + + B. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in + the Modified Version, together with at least five of the + principal authors of the Document (all of its principal + authors, if it has fewer than five), unless they release you + from this requirement. + + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + D. Preserve all the copyright notices of the Document. + + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + F. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified + Version under the terms of this License, in the form shown in + the Addendum below. + + G. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + H. Include an unaltered copy of this License. + + I. Preserve the section Entitled "History", Preserve its Title, + and add to it an item stating at least the title, year, new + authors, and publisher of the Modified Version as given on + the Title Page. If there is no section Entitled "History" in + the Document, create one stating the title, year, authors, + and publisher of the Document as given on its Title Page, + then add an item describing the Modified Version as stated in + the previous sentence. + + J. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in + the "History" section. You may omit a network location for a + work that was published at least four years before the + Document itself, or if the original publisher of the version + it refers to gives permission. + + K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the + section all the substance and tone of each of the contributor + acknowledgements and/or dedications given therein. + + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section + titles. + + M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. + + N. Do not retitle any existing section to be Entitled + "Endorsements" or to conflict in title with any Invariant + Section. + + O. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no + material copied from the Document, you may at your option + designate some or all of these sections as invariant. To do this, + add their titles to the list of Invariant Sections in the Modified + Version's license notice. These titles must be distinct from any + other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + You may add a passage of up to five words as a Front-Cover Text, + and a passage of up to 25 words as a Back-Cover Text, to the end + of the list of Cover Texts in the Modified Version. Only one + passage of Front-Cover Text and one of Back-Cover Text may be + added by (or through arrangements made by) any one entity. If the + Document already includes a cover text for the same cover, + previously added by you or by arrangement made by the same entity + you are acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this + License give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version. + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination + all of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice, and that you preserve all + their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else a + unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections Entitled + "History" in the various original documents, forming one section + Entitled "History"; likewise combine any sections Entitled + "Acknowledgements", and any sections Entitled "Dedications". You + must delete all sections Entitled "Endorsements." + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow + this License in all other respects regarding verbatim copying of + that document. + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, is called an "aggregate" if the + copyright resulting from the compilation is not used to limit the + legal rights of the compilation's users beyond what the individual + works permit. When the Document is included in an aggregate, this + License does not apply to the other works in the aggregate which + are not themselves derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half + of the entire aggregate, the Document's Cover Texts may be placed + on covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic + form. Otherwise they must appear on printed covers that bracket + the whole aggregate. + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section + 4. Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License, and all the license notices in the + Document, and any Warranty Disclaimers, provided that you also + include the original English version of this License and the + original versions of those notices and disclaimers. In case of a + disagreement between the translation and the original version of + this License or a notice or disclaimer, the original version will + prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to + Preserve its Title (section 1) will typically require changing the + actual title. + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, or distribute it is void, + and will automatically terminate your rights under this License. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly + and finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from + that copyright holder, and you cure the violation prior to 30 days + after your receipt of the notice. + + Termination of your rights under this section does not terminate + the licenses of parties who have received copies or rights from + you under this License. If your rights have been terminated and + not permanently reinstated, receipt of a copy of some or all of + the same material does not give you any rights to use it. + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + `http://www.gnu.org/copyleft/'. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. If the Document specifies that a proxy + can decide which future versions of this License can be used, that + proxy's public statement of acceptance of a version permanently + authorizes you to choose that version for the Document. + + 11. RELICENSING + + "Massive Multiauthor Collaboration Site" (or "MMC Site") means any + World Wide Web server that publishes copyrightable works and also + provides prominent facilities for anybody to edit those works. A + public wiki that anybody can edit is an example of such a server. + A "Massive Multiauthor Collaboration" (or "MMC") contained in the + site means any set of copyrightable works thus published on the MMC + site. + + "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 + license published by Creative Commons Corporation, a not-for-profit + corporation with a principal place of business in San Francisco, + California, as well as future copyleft versions of that license + published by that same organization. + + "Incorporate" means to publish or republish a Document, in whole or + in part, as part of another Document. + + An MMC is "eligible for relicensing" if it is licensed under this + License, and if all works that were first published under this + License somewhere other than this MMC, and subsequently + incorporated in whole or in part into the MMC, (1) had no cover + texts or invariant sections, and (2) were thus incorporated prior + to November 1, 2008. + + The operator of an MMC Site may republish an MMC contained in the + site under CC-BY-SA on the same site at any time before August 1, + 2009, provided the MMC is eligible for relicensing. + + +ADDENDUM: How to use this License for your documents +==================================================== + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and license +notices just after the title page: + + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. + + If you have Invariant Sections, Front-Cover Texts and Back-Cover +Texts, replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with + the Front-Cover Texts being LIST, and with the Back-Cover Texts + being LIST. + + If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + + If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + + +File: binutils.info, Node: Binutils Index, Prev: GNU Free Documentation License, Up: Top + +Binutils Index +************** + + +* Menu: + +* .stab: objdump. (line 370) +* Add prefix to absolute paths: objdump. (line 341) +* addr2line: addr2line. (line 6) +* address to file name and line number: addr2line. (line 6) +* all header information, object file: objdump. (line 489) +* ar: ar. (line 6) +* ar compatibility: ar. (line 50) +* architecture: objdump. (line 195) +* architectures available: objdump. (line 180) +* archive contents: ranlib. (line 6) +* Archive file symbol index information: readelf. (line 147) +* archive headers: objdump. (line 65) +* archives: ar. (line 6) +* base files: dlltool. (line 123) +* bug criteria: Bug Criteria. (line 6) +* bug reports: Bug Reporting. (line 6) +* bugs: Reporting Bugs. (line 6) +* bugs, reporting: Bug Reporting. (line 6) +* c++filt: c++filt. (line 6) +* changing object addresses: objcopy. (line 282) +* changing section address: objcopy. (line 292) +* changing section LMA: objcopy. (line 300) +* changing section VMA: objcopy. (line 313) +* changing start address: objcopy. (line 277) +* collections of files: ar. (line 6) +* compatibility, ar: ar. (line 50) +* contents of archive: ar cmdline. (line 88) +* crash: Bug Criteria. (line 9) +* creating archives: ar cmdline. (line 129) +* creating thin archive: ar cmdline. (line 190) +* cxxfilt: c++filt. (line 14) +* dates in archive: ar cmdline. (line 164) +* debug symbols: objdump. (line 370) +* debugging symbols: nm. (line 141) +* deleting from archive: ar cmdline. (line 26) +* demangling C++ symbols: c++filt. (line 6) +* demangling in nm: nm. (line 149) +* demangling in objdump <1>: addr2line. (line 55) +* demangling in objdump: objdump. (line 93) +* deterministic archives: ar cmdline. (line 135) +* disassembling object code: objdump. (line 115) +* disassembly architecture: objdump. (line 195) +* disassembly endianness: objdump. (line 135) +* disassembly, with source: objdump. (line 337) +* discarding symbols: strip. (line 6) +* DLL: dlltool. (line 6) +* dlltool: dlltool. (line 6) +* DWARF: objdump. (line 363) +* dynamic relocation entries, in object file: objdump. (line 325) +* dynamic symbol table entries, printing: objdump. (line 473) +* dynamic symbols: nm. (line 161) +* ELF dynamic section information: readelf. (line 105) +* ELF file header information: readelf. (line 54) +* ELF file information: readelf. (line 6) +* ELF notes: readelf. (line 90) +* ELF object file format: objdump. (line 370) +* ELF program header information: readelf. (line 60) +* ELF reloc information: readelf. (line 94) +* ELF section group information: readelf. (line 71) +* ELF section information: readelf. (line 66) +* ELF segment information: readelf. (line 60) +* ELF symbol table information: readelf. (line 81) +* ELF version sections informations: readelf. (line 109) +* endianness: objdump. (line 135) +* error on valid input: Bug Criteria. (line 12) +* external symbols: nm. (line 253) +* extract from archive: ar cmdline. (line 103) +* fatal signal: Bug Criteria. (line 9) +* file name: nm. (line 135) +* header information, all: objdump. (line 489) +* input .def file: dlltool. (line 119) +* input file name: nm. (line 135) +* Instruction width: objdump. (line 358) +* libraries: ar. (line 25) +* listings strings: strings. (line 6) +* load plugin: nm. (line 176) +* machine instructions: objdump. (line 115) +* moving in archive: ar cmdline. (line 34) +* MRI compatibility, ar: ar scripts. (line 8) +* name duplication in archive: ar cmdline. (line 97) +* name length: ar. (line 18) +* nm: nm. (line 6) +* nm compatibility: nm. (line 167) +* nm format: nm. (line 145) +* not writing archive index: ar cmdline. (line 183) +* objdump: objdump. (line 6) +* object code format <1>: addr2line. (line 50) +* object code format <2>: strings. (line 67) +* object code format <3>: objdump. (line 79) +* object code format <4>: size. (line 84) +* object code format: nm. (line 244) +* object file header: objdump. (line 141) +* object file information: objdump. (line 6) +* object file offsets: objdump. (line 146) +* object file sections: objdump. (line 332) +* object formats available: objdump. (line 180) +* operations on archive: ar cmdline. (line 22) +* printing from archive: ar cmdline. (line 46) +* printing strings: strings. (line 6) +* quick append to archive: ar cmdline. (line 54) +* radix for section sizes: size. (line 66) +* ranlib: ranlib. (line 6) +* readelf: readelf. (line 6) +* relative placement in archive: ar cmdline. (line 117) +* relocation entries, in object file: objdump. (line 319) +* removing symbols: strip. (line 6) +* repeated names in archive: ar cmdline. (line 97) +* replacement in archive: ar cmdline. (line 70) +* reporting bugs: Reporting Bugs. (line 6) +* scripts, ar: ar scripts. (line 8) +* section addresses in objdump: objdump. (line 71) +* section headers: objdump. (line 162) +* section information: objdump. (line 185) +* section sizes: size. (line 6) +* sections, full contents: objdump. (line 332) +* size: size. (line 6) +* size display format: size. (line 27) +* size number format: size. (line 66) +* sorting symbols: nm. (line 197) +* source code context: objdump. (line 155) +* source disassembly: objdump. (line 337) +* source file name: nm. (line 135) +* source filenames for object files: objdump. (line 189) +* stab: objdump. (line 370) +* start-address: objdump. (line 380) +* stop-address: objdump. (line 384) +* strings: strings. (line 6) +* strings, printing: strings. (line 6) +* strip: strip. (line 6) +* Strip absolute paths: objdump. (line 344) +* symbol index <1>: ranlib. (line 6) +* symbol index: ar. (line 28) +* symbol index, listing: nm. (line 214) +* symbol line numbers: nm. (line 182) +* symbol table entries, printing: objdump. (line 389) +* symbols: nm. (line 6) +* symbols, discarding: strip. (line 6) +* thin archives: ar. (line 40) +* undefined symbols: nm. (line 249) +* Unix compatibility, ar: ar cmdline. (line 8) +* unwind information: readelf. (line 99) +* updating an archive: ar cmdline. (line 195) +* version: Top. (line 6) +* VMA in objdump: objdump. (line 71) +* wide output, printing: objdump. (line 495) +* writing archive index: ar cmdline. (line 177) + + + +Tag Table: +Node: Top1929 +Node: ar3572 +Node: ar cmdline6377 +Node: ar scripts15420 +Node: nm21108 +Node: objcopy30582 +Node: objdump58823 +Node: ranlib79295 +Node: size80116 +Node: strings83121 +Node: strip85579 +Node: c++filt91530 +Ref: c++filt-Footnote-196375 +Node: addr2line96481 +Node: nlmconv99752 +Node: windmc102358 +Node: windres106005 +Node: dlltool112032 +Node: def file format124716 +Node: readelf126454 +Node: Common Options132460 +Node: Selecting the Target System133500 +Node: Target Selection134432 +Node: Architecture Selection136414 +Node: Reporting Bugs137242 +Node: Bug Criteria138021 +Node: Bug Reporting138574 +Node: GNU Free Documentation License145444 +Node: Binutils Index170623 + +End Tag Table diff --git a/binutils/doc/cxxfilt.man b/binutils/doc/cxxfilt.man new file mode 100644 index 0000000..ace34ee --- /dev/null +++ b/binutils/doc/cxxfilt.man @@ -0,0 +1,345 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "C++FILT 1" +.TH C++FILT 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +cxxfilt \- Demangle C++ and Java symbols. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +c++filt [\fB\-_\fR|\fB\-\-strip\-underscores\fR] + [\fB\-n\fR|\fB\-\-no\-strip\-underscores\fR] + [\fB\-p\fR|\fB\-\-no\-params\fR] + [\fB\-t\fR|\fB\-\-types\fR] + [\fB\-i\fR|\fB\-\-no\-verbose\fR] + [\fB\-s\fR \fIformat\fR|\fB\-\-format=\fR\fIformat\fR] + [\fB\-\-help\fR] [\fB\-\-version\fR] [\fIsymbol\fR...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +The \*(C+ and Java languages provide function overloading, which means +that you can write many functions with the same name, providing that +each function takes parameters of different types. In order to be +able to distinguish these similarly named functions \*(C+ and Java +encode them into a low-level assembler name which uniquely identifies +each different version. This process is known as \fImangling\fR. The +\&\fBc++filt\fR +[1] +program does the inverse mapping: it decodes (\fIdemangles\fR) low-level +names into user-level names so that they can be read. +.PP +Every alphanumeric word (consisting of letters, digits, underscores, +dollars, or periods) seen in the input is a potential mangled name. +If the name decodes into a \*(C+ name, the \*(C+ name replaces the +low-level name in the output, otherwise the original word is output. +In this way you can pass an entire assembler source file, containing +mangled names, through \fBc++filt\fR and see the same source file +containing demangled names. +.PP +You can also use \fBc++filt\fR to decipher individual symbols by +passing them on the command line: +.PP +.Vb 1 +\& c++filt <symbol> +.Ve +.PP +If no \fIsymbol\fR arguments are given, \fBc++filt\fR reads symbol +names from the standard input instead. All the results are printed on +the standard output. The difference between reading names from the +command line versus reading names from the standard input is that +command line arguments are expected to be just mangled names and no +checking is performed to separate them from surrounding text. Thus +for example: +.PP +.Vb 1 +\& c++filt \-n _Z1fv +.Ve +.PP +will work and demangle the name to \*(L"f()\*(R" whereas: +.PP +.Vb 1 +\& c++filt \-n _Z1fv, +.Ve +.PP +will not work. (Note the extra comma at the end of the mangled +name which makes it invalid). This command however will work: +.PP +.Vb 1 +\& echo _Z1fv, | c++filt \-n +.Ve +.PP +and will display \*(L"f(),\*(R", i.e., the demangled name followed by a +trailing comma. This behaviour is because when the names are read +from the standard input it is expected that they might be part of an +assembler source file where there might be extra, extraneous +characters trailing after a mangled name. For example: +.PP +.Vb 1 +\& .type _Z1fv, @function +.Ve +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-_\fR" 4 +.IX Item "-_" +.PD 0 +.IP "\fB\-\-strip\-underscores\fR" 4 +.IX Item "--strip-underscores" +.PD +On some systems, both the C and \*(C+ compilers put an underscore in front +of every name. For example, the C name \f(CW\*(C`foo\*(C'\fR gets the low-level +name \f(CW\*(C`_foo\*(C'\fR. This option removes the initial underscore. Whether +\&\fBc++filt\fR removes the underscore by default is target dependent. +.IP "\fB\-n\fR" 4 +.IX Item "-n" +.PD 0 +.IP "\fB\-\-no\-strip\-underscores\fR" 4 +.IX Item "--no-strip-underscores" +.PD +Do not remove the initial underscore. +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-no\-params\fR" 4 +.IX Item "--no-params" +.PD +When demangling the name of a function, do not display the types of +the function's parameters. +.IP "\fB\-t\fR" 4 +.IX Item "-t" +.PD 0 +.IP "\fB\-\-types\fR" 4 +.IX Item "--types" +.PD +Attempt to demangle types as well as function names. This is disabled +by default since mangled types are normally only used internally in +the compiler, and they can be confused with non-mangled names. For example, +a function called \*(L"a\*(R" treated as a mangled type name would be +demangled to \*(L"signed char\*(R". +.IP "\fB\-i\fR" 4 +.IX Item "-i" +.PD 0 +.IP "\fB\-\-no\-verbose\fR" 4 +.IX Item "--no-verbose" +.PD +Do not include implementation details (if any) in the demangled +output. +.IP "\fB\-s\fR \fIformat\fR" 4 +.IX Item "-s format" +.PD 0 +.IP "\fB\-\-format=\fR\fIformat\fR" 4 +.IX Item "--format=format" +.PD +\&\fBc++filt\fR can decode various methods of mangling, used by +different compilers. The argument to this option selects which +method it uses: +.RS 4 +.ie n .IP """auto""" 4 +.el .IP "\f(CWauto\fR" 4 +.IX Item "auto" +Automatic selection based on executable (the default method) +.ie n .IP """gnu""" 4 +.el .IP "\f(CWgnu\fR" 4 +.IX Item "gnu" +the one used by the \s-1GNU\s0 \*(C+ compiler (g++) +.ie n .IP """lucid""" 4 +.el .IP "\f(CWlucid\fR" 4 +.IX Item "lucid" +the one used by the Lucid compiler (lcc) +.ie n .IP """arm""" 4 +.el .IP "\f(CWarm\fR" 4 +.IX Item "arm" +the one specified by the \*(C+ Annotated Reference Manual +.ie n .IP """hp""" 4 +.el .IP "\f(CWhp\fR" 4 +.IX Item "hp" +the one used by the \s-1HP\s0 compiler (aCC) +.ie n .IP """edg""" 4 +.el .IP "\f(CWedg\fR" 4 +.IX Item "edg" +the one used by the \s-1EDG\s0 compiler +.ie n .IP """gnu\-v3""" 4 +.el .IP "\f(CWgnu\-v3\fR" 4 +.IX Item "gnu-v3" +the one used by the \s-1GNU\s0 \*(C+ compiler (g++) with the V3 \s-1ABI\s0. +.ie n .IP """java""" 4 +.el .IP "\f(CWjava\fR" 4 +.IX Item "java" +the one used by the \s-1GNU\s0 Java compiler (gcj) +.ie n .IP """gnat""" 4 +.el .IP "\f(CWgnat\fR" 4 +.IX Item "gnat" +the one used by the \s-1GNU\s0 Ada compiler (\s-1GNAT\s0). +.RE +.RS 4 +.RE +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Print a summary of the options to \fBc++filt\fR and exit. +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +Print the version number of \fBc++filt\fR and exit. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "FOOTNOTES" +.IX Header "FOOTNOTES" +.IP "1." 4 +MS-DOS does not allow \f(CW\*(C`+\*(C'\fR characters in file names, so on +MS-DOS this program is named \fB\s-1CXXFILT\s0\fR. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/dlltool.1 b/binutils/doc/dlltool.1 new file mode 100644 index 0000000..5d9dd27 --- /dev/null +++ b/binutils/doc/dlltool.1 @@ -0,0 +1,529 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "DLLTOOL 1" +.TH DLLTOOL 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +dlltool \- Create files needed to build and use DLLs. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +dlltool [\fB\-d\fR|\fB\-\-input\-def\fR \fIdef-file-name\fR] + [\fB\-b\fR|\fB\-\-base\-file\fR \fIbase-file-name\fR] + [\fB\-e\fR|\fB\-\-output\-exp\fR \fIexports-file-name\fR] + [\fB\-z\fR|\fB\-\-output\-def\fR \fIdef-file-name\fR] + [\fB\-l\fR|\fB\-\-output\-lib\fR \fIlibrary-file-name\fR] + [\fB\-y\fR|\fB\-\-output\-delaylib\fR \fIlibrary-file-name\fR] + [\fB\-\-export\-all\-symbols\fR] [\fB\-\-no\-export\-all\-symbols\fR] + [\fB\-\-exclude\-symbols\fR \fIlist\fR] + [\fB\-\-no\-default\-excludes\fR] + [\fB\-S\fR|\fB\-\-as\fR \fIpath-to-assembler\fR] [\fB\-f\fR|\fB\-\-as\-flags\fR \fIoptions\fR] + [\fB\-D\fR|\fB\-\-dllname\fR \fIname\fR] [\fB\-m\fR|\fB\-\-machine\fR \fImachine\fR] + [\fB\-a\fR|\fB\-\-add\-indirect\fR] + [\fB\-U\fR|\fB\-\-add\-underscore\fR] [\fB\-\-add\-stdcall\-underscore\fR] + [\fB\-k\fR|\fB\-\-kill\-at\fR] [\fB\-A\fR|\fB\-\-add\-stdcall\-alias\fR] + [\fB\-p\fR|\fB\-\-ext\-prefix\-alias\fR \fIprefix\fR] + [\fB\-x\fR|\fB\-\-no\-idata4\fR] [\fB\-c\fR|\fB\-\-no\-idata5\fR] + [\fB\-\-use\-nul\-prefixed\-import\-tables\fR] + [\fB\-I\fR|\fB\-\-identify\fR \fIlibrary-file-name\fR] [\fB\-\-identify\-strict\fR] + [\fB\-i\fR|\fB\-\-interwork\fR] + [\fB\-n\fR|\fB\-\-nodelete\fR] [\fB\-t\fR|\fB\-\-temp\-prefix\fR \fIprefix\fR] + [\fB\-v\fR|\fB\-\-verbose\fR] + [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] + [object\-file ...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBdlltool\fR reads its inputs, which can come from the \fB\-d\fR and +\&\fB\-b\fR options as well as object files specified on the command +line. It then processes these inputs and if the \fB\-e\fR option has +been specified it creates a exports file. If the \fB\-l\fR option +has been specified it creates a library file and if the \fB\-z\fR option +has been specified it creates a def file. Any or all of the \fB\-e\fR, +\&\fB\-l\fR and \fB\-z\fR options can be present in one invocation of +dlltool. +.PP +When creating a \s-1DLL\s0, along with the source for the \s-1DLL\s0, it is necessary +to have three other files. \fBdlltool\fR can help with the creation of +these files. +.PP +The first file is a \fI.def\fR file which specifies which functions are +exported from the \s-1DLL\s0, which functions the \s-1DLL\s0 imports, and so on. This +is a text file and can be created by hand, or \fBdlltool\fR can be used +to create it using the \fB\-z\fR option. In this case \fBdlltool\fR +will scan the object files specified on its command line looking for +those functions which have been specially marked as being exported and +put entries for them in the \fI.def\fR file it creates. +.PP +In order to mark a function as being exported from a \s-1DLL\s0, it needs to +have an \fB\-export:<name_of_function>\fR entry in the \fB.drectve\fR +section of the object file. This can be done in C by using the +\&\fIasm()\fR operator: +.PP +.Vb 2 +\& asm (".section .drectve"); +\& asm (".ascii \e"\-export:my_func\e""); +\& +\& int my_func (void) { ... } +.Ve +.PP +The second file needed for \s-1DLL\s0 creation is an exports file. This file +is linked with the object files that make up the body of the \s-1DLL\s0 and it +handles the interface between the \s-1DLL\s0 and the outside world. This is a +binary file and it can be created by giving the \fB\-e\fR option to +\&\fBdlltool\fR when it is creating or reading in a \fI.def\fR file. +.PP +The third file needed for \s-1DLL\s0 creation is the library file that programs +will link with in order to access the functions in the \s-1DLL\s0 (an `import +library'). This file can be created by giving the \fB\-l\fR option to +dlltool when it is creating or reading in a \fI.def\fR file. +.PP +If the \fB\-y\fR option is specified, dlltool generates a delay-import +library that can be used instead of the normal import library to allow +a program to link to the dll only as soon as an imported function is +called for the first time. The resulting executable will need to be +linked to the static delayimp library containing _\|\fI_delayLoadHelper2()\fR, +which in turn will import LoadLibraryA and GetProcAddress from kernel32. +.PP +\&\fBdlltool\fR builds the library file by hand, but it builds the +exports file by creating temporary files containing assembler statements +and then assembling these. The \fB\-S\fR command line option can be +used to specify the path to the assembler that dlltool will use, +and the \fB\-f\fR option can be used to pass specific flags to that +assembler. The \fB\-n\fR can be used to prevent dlltool from deleting +these temporary assembler files when it is done, and if \fB\-n\fR is +specified twice then this will prevent dlltool from deleting the +temporary object files it used to build the library. +.PP +Here is an example of creating a \s-1DLL\s0 from a source file \fBdll.c\fR and +also creating a program (from an object file called \fBprogram.o\fR) +that uses that \s-1DLL:\s0 +.PP +.Vb 4 +\& gcc \-c dll.c +\& dlltool \-e exports.o \-l dll.lib dll.o +\& gcc dll.o exports.o \-o dll.dll +\& gcc program.o dll.lib \-o program +.Ve +.PP +\&\fBdlltool\fR may also be used to query an existing import library +to determine the name of the \s-1DLL\s0 to which it is associated. See the +description of the \fB\-I\fR or \fB\-\-identify\fR option. +.SH "OPTIONS" +.IX Header "OPTIONS" +The command line options have the following meanings: +.IP "\fB\-d\fR \fIfilename\fR" 4 +.IX Item "-d filename" +.PD 0 +.IP "\fB\-\-input\-def\fR \fIfilename\fR" 4 +.IX Item "--input-def filename" +.PD +Specifies the name of a \fI.def\fR file to be read in and processed. +.IP "\fB\-b\fR \fIfilename\fR" 4 +.IX Item "-b filename" +.PD 0 +.IP "\fB\-\-base\-file\fR \fIfilename\fR" 4 +.IX Item "--base-file filename" +.PD +Specifies the name of a base file to be read in and processed. The +contents of this file will be added to the relocation section in the +exports file generated by dlltool. +.IP "\fB\-e\fR \fIfilename\fR" 4 +.IX Item "-e filename" +.PD 0 +.IP "\fB\-\-output\-exp\fR \fIfilename\fR" 4 +.IX Item "--output-exp filename" +.PD +Specifies the name of the export file to be created by dlltool. +.IP "\fB\-z\fR \fIfilename\fR" 4 +.IX Item "-z filename" +.PD 0 +.IP "\fB\-\-output\-def\fR \fIfilename\fR" 4 +.IX Item "--output-def filename" +.PD +Specifies the name of the \fI.def\fR file to be created by dlltool. +.IP "\fB\-l\fR \fIfilename\fR" 4 +.IX Item "-l filename" +.PD 0 +.IP "\fB\-\-output\-lib\fR \fIfilename\fR" 4 +.IX Item "--output-lib filename" +.PD +Specifies the name of the library file to be created by dlltool. +.IP "\fB\-y\fR \fIfilename\fR" 4 +.IX Item "-y filename" +.PD 0 +.IP "\fB\-\-output\-delaylib\fR \fIfilename\fR" 4 +.IX Item "--output-delaylib filename" +.PD +Specifies the name of the delay-import library file to be created by dlltool. +.IP "\fB\-\-export\-all\-symbols\fR" 4 +.IX Item "--export-all-symbols" +Treat all global and weak defined symbols found in the input object +files as symbols to be exported. There is a small list of symbols which +are not exported by default; see the \fB\-\-no\-default\-excludes\fR +option. You may add to the list of symbols to not export by using the +\&\fB\-\-exclude\-symbols\fR option. +.IP "\fB\-\-no\-export\-all\-symbols\fR" 4 +.IX Item "--no-export-all-symbols" +Only export symbols explicitly listed in an input \fI.def\fR file or in +\&\fB.drectve\fR sections in the input object files. This is the default +behaviour. The \fB.drectve\fR sections are created by \fBdllexport\fR +attributes in the source code. +.IP "\fB\-\-exclude\-symbols\fR \fIlist\fR" 4 +.IX Item "--exclude-symbols list" +Do not export the symbols in \fIlist\fR. This is a list of symbol names +separated by comma or colon characters. The symbol names should not +contain a leading underscore. This is only meaningful when +\&\fB\-\-export\-all\-symbols\fR is used. +.IP "\fB\-\-no\-default\-excludes\fR" 4 +.IX Item "--no-default-excludes" +When \fB\-\-export\-all\-symbols\fR is used, it will by default avoid +exporting certain special symbols. The current list of symbols to avoid +exporting is \fBDllMain@12\fR, \fBDllEntryPoint@0\fR, +\&\fBimpure_ptr\fR. You may use the \fB\-\-no\-default\-excludes\fR option +to go ahead and export these special symbols. This is only meaningful +when \fB\-\-export\-all\-symbols\fR is used. +.IP "\fB\-S\fR \fIpath\fR" 4 +.IX Item "-S path" +.PD 0 +.IP "\fB\-\-as\fR \fIpath\fR" 4 +.IX Item "--as path" +.PD +Specifies the path, including the filename, of the assembler to be used +to create the exports file. +.IP "\fB\-f\fR \fIoptions\fR" 4 +.IX Item "-f options" +.PD 0 +.IP "\fB\-\-as\-flags\fR \fIoptions\fR" 4 +.IX Item "--as-flags options" +.PD +Specifies any specific command line options to be passed to the +assembler when building the exports file. This option will work even if +the \fB\-S\fR option is not used. This option only takes one argument, +and if it occurs more than once on the command line, then later +occurrences will override earlier occurrences. So if it is necessary to +pass multiple options to the assembler they should be enclosed in +double quotes. +.IP "\fB\-D\fR \fIname\fR" 4 +.IX Item "-D name" +.PD 0 +.IP "\fB\-\-dll\-name\fR \fIname\fR" 4 +.IX Item "--dll-name name" +.PD +Specifies the name to be stored in the \fI.def\fR file as the name of +the \s-1DLL\s0 when the \fB\-e\fR option is used. If this option is not +present, then the filename given to the \fB\-e\fR option will be +used as the name of the \s-1DLL\s0. +.IP "\fB\-m\fR \fImachine\fR" 4 +.IX Item "-m machine" +.PD 0 +.IP "\fB\-machine\fR \fImachine\fR" 4 +.IX Item "-machine machine" +.PD +Specifies the type of machine for which the library file should be +built. \fBdlltool\fR has a built in default type, depending upon how +it was created, but this option can be used to override that. This is +normally only useful when creating DLLs for an \s-1ARM\s0 processor, when the +contents of the \s-1DLL\s0 are actually encode using Thumb instructions. +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-add\-indirect\fR" 4 +.IX Item "--add-indirect" +.PD +Specifies that when \fBdlltool\fR is creating the exports file it +should add a section which allows the exported functions to be +referenced without using the import library. Whatever the hell that +means! +.IP "\fB\-U\fR" 4 +.IX Item "-U" +.PD 0 +.IP "\fB\-\-add\-underscore\fR" 4 +.IX Item "--add-underscore" +.PD +Specifies that when \fBdlltool\fR is creating the exports file it +should prepend an underscore to the names of \fIall\fR exported symbols. +.IP "\fB\-\-add\-stdcall\-underscore\fR" 4 +.IX Item "--add-stdcall-underscore" +Specifies that when \fBdlltool\fR is creating the exports file it +should prepend an underscore to the names of exported \fIstdcall\fR +functions. Variable names and non-stdcall function names are not modified. +This option is useful when creating GNU-compatible import libs for third +party DLLs that were built with MS-Windows tools. +.IP "\fB\-k\fR" 4 +.IX Item "-k" +.PD 0 +.IP "\fB\-\-kill\-at\fR" 4 +.IX Item "--kill-at" +.PD +Specifies that when \fBdlltool\fR is creating the exports file it +should not append the string \fB@ <number>\fR. These numbers are +called ordinal numbers and they represent another way of accessing the +function in a \s-1DLL\s0, other than by name. +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-\-add\-stdcall\-alias\fR" 4 +.IX Item "--add-stdcall-alias" +.PD +Specifies that when \fBdlltool\fR is creating the exports file it +should add aliases for stdcall symbols without \fB@ <number>\fR +in addition to the symbols with \fB@ <number>\fR. +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-ext\-prefix\-alias\fR \fIprefix\fR" 4 +.IX Item "--ext-prefix-alias prefix" +.PD +Causes \fBdlltool\fR to create external aliases for all \s-1DLL\s0 +imports with the specified prefix. The aliases are created for both +external and import symbols with no leading underscore. +.IP "\fB\-x\fR" 4 +.IX Item "-x" +.PD 0 +.IP "\fB\-\-no\-idata4\fR" 4 +.IX Item "--no-idata4" +.PD +Specifies that when \fBdlltool\fR is creating the exports and library +files it should omit the \f(CW\*(C`.idata4\*(C'\fR section. This is for compatibility +with certain operating systems. +.IP "\fB\-\-use\-nul\-prefixed\-import\-tables\fR" 4 +.IX Item "--use-nul-prefixed-import-tables" +Specifies that when \fBdlltool\fR is creating the exports and library +files it should prefix the \f(CW\*(C`.idata4\*(C'\fR and \f(CW\*(C`.idata5\*(C'\fR by zero an +element. This emulates old gnu import library generation of +\&\f(CW\*(C`dlltool\*(C'\fR. By default this option is turned off. +.IP "\fB\-c\fR" 4 +.IX Item "-c" +.PD 0 +.IP "\fB\-\-no\-idata5\fR" 4 +.IX Item "--no-idata5" +.PD +Specifies that when \fBdlltool\fR is creating the exports and library +files it should omit the \f(CW\*(C`.idata5\*(C'\fR section. This is for compatibility +with certain operating systems. +.IP "\fB\-I\fR \fIfilename\fR" 4 +.IX Item "-I filename" +.PD 0 +.IP "\fB\-\-identify\fR \fIfilename\fR" 4 +.IX Item "--identify filename" +.PD +Specifies that \fBdlltool\fR should inspect the import library +indicated by \fIfilename\fR and report, on \f(CW\*(C`stdout\*(C'\fR, the name(s) +of the associated \s-1DLL\s0(s). This can be performed in addition to any +other operations indicated by the other options and arguments. +\&\fBdlltool\fR fails if the import library does not exist or is not +actually an import library. See also \fB\-\-identify\-strict\fR. +.IP "\fB\-\-identify\-strict\fR" 4 +.IX Item "--identify-strict" +Modifies the behavior of the \fB\-\-identify\fR option, such +that an error is reported if \fIfilename\fR is associated with +more than one \s-1DLL\s0. +.IP "\fB\-i\fR" 4 +.IX Item "-i" +.PD 0 +.IP "\fB\-\-interwork\fR" 4 +.IX Item "--interwork" +.PD +Specifies that \fBdlltool\fR should mark the objects in the library +file and exports file that it produces as supporting interworking +between \s-1ARM\s0 and Thumb code. +.IP "\fB\-n\fR" 4 +.IX Item "-n" +.PD 0 +.IP "\fB\-\-nodelete\fR" 4 +.IX Item "--nodelete" +.PD +Makes \fBdlltool\fR preserve the temporary assembler files it used to +create the exports file. If this option is repeated then dlltool will +also preserve the temporary object files it uses to create the library +file. +.IP "\fB\-t\fR \fIprefix\fR" 4 +.IX Item "-t prefix" +.PD 0 +.IP "\fB\-\-temp\-prefix\fR \fIprefix\fR" 4 +.IX Item "--temp-prefix prefix" +.PD +Makes \fBdlltool\fR use \fIprefix\fR when constructing the names of +temporary assembler and object files. By default, the temp file prefix +is generated from the pid. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-verbose\fR" 4 +.IX Item "--verbose" +.PD +Make dlltool describe what it is doing. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Displays a list of command line options and then exits. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Displays dlltool's version number and then exits. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +The Info pages for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/nlmconv.1 b/binutils/doc/nlmconv.1 new file mode 100644 index 0000000..e01a0ca --- /dev/null +++ b/binutils/doc/nlmconv.1 @@ -0,0 +1,251 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "NLMCONV 1" +.TH NLMCONV 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +nlmconv \- converts object code into an NLM. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +nlmconv [\fB\-I\fR \fIbfdname\fR|\fB\-\-input\-target=\fR\fIbfdname\fR] + [\fB\-O\fR \fIbfdname\fR|\fB\-\-output\-target=\fR\fIbfdname\fR] + [\fB\-T\fR \fIheaderfile\fR|\fB\-\-header\-file=\fR\fIheaderfile\fR] + [\fB\-d\fR|\fB\-\-debug\fR] [\fB\-l\fR \fIlinker\fR|\fB\-\-linker=\fR\fIlinker\fR] + [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] + \fIinfile\fR \fIoutfile\fR +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBnlmconv\fR converts the relocatable \fBi386\fR object file +\&\fIinfile\fR into the NetWare Loadable Module \fIoutfile\fR, optionally +reading \fIheaderfile\fR for \s-1NLM\s0 header information. For instructions +on writing the \s-1NLM\s0 command file language used in header files, see the +\&\fBlinkers\fR section, \fB\s-1NLMLINK\s0\fR in particular, of the \fI\s-1NLM\s0 +Development and Tools Overview\fR, which is part of the \s-1NLM\s0 Software +Developer's Kit (\*(L"\s-1NLM\s0 \s-1SDK\s0\*(R"), available from Novell, Inc. +\&\fBnlmconv\fR uses the \s-1GNU\s0 Binary File Descriptor library to read +\&\fIinfile\fR; +.PP +\&\fBnlmconv\fR can perform a link step. In other words, you can list +more than one object file for input if you list them in the definitions +file (rather than simply specifying one input file on the command line). +In this case, \fBnlmconv\fR calls the linker for you. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-I\fR \fIbfdname\fR" 4 +.IX Item "-I bfdname" +.PD 0 +.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4 +.IX Item "--input-target=bfdname" +.PD +Object format of the input file. \fBnlmconv\fR can usually determine +the format of a given file (so no default is necessary). +.IP "\fB\-O\fR \fIbfdname\fR" 4 +.IX Item "-O bfdname" +.PD 0 +.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4 +.IX Item "--output-target=bfdname" +.PD +Object format of the output file. \fBnlmconv\fR infers the output +format based on the input format, e.g. for a \fBi386\fR input file the +output format is \fBnlm32\-i386\fR. +.IP "\fB\-T\fR \fIheaderfile\fR" 4 +.IX Item "-T headerfile" +.PD 0 +.IP "\fB\-\-header\-file=\fR\fIheaderfile\fR" 4 +.IX Item "--header-file=headerfile" +.PD +Reads \fIheaderfile\fR for \s-1NLM\s0 header information. For instructions on +writing the \s-1NLM\s0 command file language used in header files, see see the +\&\fBlinkers\fR section, of the \fI\s-1NLM\s0 Development and Tools +Overview\fR, which is part of the \s-1NLM\s0 Software Developer's Kit, available +from Novell, Inc. +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.PD 0 +.IP "\fB\-\-debug\fR" 4 +.IX Item "--debug" +.PD +Displays (on standard error) the linker command line used by \fBnlmconv\fR. +.IP "\fB\-l\fR \fIlinker\fR" 4 +.IX Item "-l linker" +.PD 0 +.IP "\fB\-\-linker=\fR\fIlinker\fR" 4 +.IX Item "--linker=linker" +.PD +Use \fIlinker\fR for any linking. \fIlinker\fR can be an absolute or a +relative pathname. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Prints a usage summary. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Prints the version number for \fBnlmconv\fR. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/nm.1 b/binutils/doc/nm.1 new file mode 100644 index 0000000..edee811 --- /dev/null +++ b/binutils/doc/nm.1 @@ -0,0 +1,523 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "NM 1" +.TH NM 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +nm \- list symbols from object files +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +nm [\fB\-a\fR|\fB\-\-debug\-syms\fR] + [\fB\-g\fR|\fB\-\-extern\-only\fR][\fB\-\-plugin\fR \fIname\fR] + [\fB\-B\fR] [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]] [\fB\-D\fR|\fB\-\-dynamic\fR] + [\fB\-S\fR|\fB\-\-print\-size\fR] [\fB\-s\fR|\fB\-\-print\-armap\fR] + [\fB\-A\fR|\fB\-o\fR|\fB\-\-print\-file\-name\fR][\fB\-\-special\-syms\fR] + [\fB\-n\fR|\fB\-v\fR|\fB\-\-numeric\-sort\fR] [\fB\-p\fR|\fB\-\-no\-sort\fR] + [\fB\-r\fR|\fB\-\-reverse\-sort\fR] [\fB\-\-size\-sort\fR] [\fB\-u\fR|\fB\-\-undefined\-only\fR] + [\fB\-t\fR \fIradix\fR|\fB\-\-radix=\fR\fIradix\fR] [\fB\-P\fR|\fB\-\-portability\fR] + [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-f\fR\fIformat\fR|\fB\-\-format=\fR\fIformat\fR] + [\fB\-\-defined\-only\fR] [\fB\-l\fR|\fB\-\-line\-numbers\fR] [\fB\-\-no\-demangle\fR] + [\fB\-V\fR|\fB\-\-version\fR] [\fB\-X 32_64\fR] [\fB\-\-help\fR] [\fIobjfile\fR...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\s-1GNU\s0 \fBnm\fR lists the symbols from object files \fIobjfile\fR.... +If no object files are listed as arguments, \fBnm\fR assumes the file +\&\fIa.out\fR. +.PP +For each symbol, \fBnm\fR shows: +.IP "\(bu" 4 +The symbol value, in the radix selected by options (see below), or +hexadecimal by default. +.IP "\(bu" 4 +The symbol type. At least the following types are used; others are, as +well, depending on the object file format. If lowercase, the symbol is +local; if uppercase, the symbol is global (external). +.RS 4 +.ie n .IP """A""" 4 +.el .IP "\f(CWA\fR" 4 +.IX Item "A" +The symbol's value is absolute, and will not be changed by further +linking. +.ie n .IP """B""" 4 +.el .IP "\f(CWB\fR" 4 +.IX Item "B" +.PD 0 +.ie n .IP """b""" 4 +.el .IP "\f(CWb\fR" 4 +.IX Item "b" +.PD +The symbol is in the uninitialized data section (known as \s-1BSS\s0). +.ie n .IP """C""" 4 +.el .IP "\f(CWC\fR" 4 +.IX Item "C" +The symbol is common. Common symbols are uninitialized data. When +linking, multiple common symbols may appear with the same name. If the +symbol is defined anywhere, the common symbols are treated as undefined +references. +.ie n .IP """D""" 4 +.el .IP "\f(CWD\fR" 4 +.IX Item "D" +.PD 0 +.ie n .IP """d""" 4 +.el .IP "\f(CWd\fR" 4 +.IX Item "d" +.PD +The symbol is in the initialized data section. +.ie n .IP """G""" 4 +.el .IP "\f(CWG\fR" 4 +.IX Item "G" +.PD 0 +.ie n .IP """g""" 4 +.el .IP "\f(CWg\fR" 4 +.IX Item "g" +.PD +The symbol is in an initialized data section for small objects. Some +object file formats permit more efficient access to small data objects, +such as a global int variable as opposed to a large global array. +.ie n .IP """i""" 4 +.el .IP "\f(CWi\fR" 4 +.IX Item "i" +For \s-1PE\s0 format files this indicates that the symbol is in a section +specific to the implementation of DLLs. For \s-1ELF\s0 format files this +indicates that the symbol is an indirect function. This is a \s-1GNU\s0 +extension to the standard set of \s-1ELF\s0 symbol types. It indicates a +symbol which if referenced by a relocation does not evaluate to its +address, but instead must be invoked at runtime. The runtime +execution will then return the value to be used in the relocation. +.ie n .IP """N""" 4 +.el .IP "\f(CWN\fR" 4 +.IX Item "N" +The symbol is a debugging symbol. +.ie n .IP """p""" 4 +.el .IP "\f(CWp\fR" 4 +.IX Item "p" +The symbols is in a stack unwind section. +.ie n .IP """R""" 4 +.el .IP "\f(CWR\fR" 4 +.IX Item "R" +.PD 0 +.ie n .IP """r""" 4 +.el .IP "\f(CWr\fR" 4 +.IX Item "r" +.PD +The symbol is in a read only data section. +.ie n .IP """S""" 4 +.el .IP "\f(CWS\fR" 4 +.IX Item "S" +.PD 0 +.ie n .IP """s""" 4 +.el .IP "\f(CWs\fR" 4 +.IX Item "s" +.PD +The symbol is in an uninitialized data section for small objects. +.ie n .IP """T""" 4 +.el .IP "\f(CWT\fR" 4 +.IX Item "T" +.PD 0 +.ie n .IP """t""" 4 +.el .IP "\f(CWt\fR" 4 +.IX Item "t" +.PD +The symbol is in the text (code) section. +.ie n .IP """U""" 4 +.el .IP "\f(CWU\fR" 4 +.IX Item "U" +The symbol is undefined. +.ie n .IP """u""" 4 +.el .IP "\f(CWu\fR" 4 +.IX Item "u" +The symbol is a unique global symbol. This is a \s-1GNU\s0 extension to the +standard set of \s-1ELF\s0 symbol bindings. For such a symbol the dynamic linker +will make sure that in the entire process there is just one symbol with +this name and type in use. +.ie n .IP """V""" 4 +.el .IP "\f(CWV\fR" 4 +.IX Item "V" +.PD 0 +.ie n .IP """v""" 4 +.el .IP "\f(CWv\fR" 4 +.IX Item "v" +.PD +The symbol is a weak object. When a weak defined symbol is linked with +a normal defined symbol, the normal defined symbol is used with no error. +When a weak undefined symbol is linked and the symbol is not defined, +the value of the weak symbol becomes zero with no error. On some +systems, uppercase indicates that a default value has been specified. +.ie n .IP """W""" 4 +.el .IP "\f(CWW\fR" 4 +.IX Item "W" +.PD 0 +.ie n .IP """w""" 4 +.el .IP "\f(CWw\fR" 4 +.IX Item "w" +.PD +The symbol is a weak symbol that has not been specifically tagged as a +weak object symbol. When a weak defined symbol is linked with a normal +defined symbol, the normal defined symbol is used with no error. +When a weak undefined symbol is linked and the symbol is not defined, +the value of the symbol is determined in a system-specific manner without +error. On some systems, uppercase indicates that a default value has been +specified. +.ie n .IP """\-""" 4 +.el .IP "\f(CW\-\fR" 4 +.IX Item "-" +The symbol is a stabs symbol in an a.out object file. In this case, the +next values printed are the stabs other field, the stabs desc field, and +the stab type. Stabs symbols are used to hold debugging information. +.ie n .IP """?""" 4 +.el .IP "\f(CW?\fR" 4 +.IX Item "?" +The symbol type is unknown, or object file format specific. +.RE +.RS 4 +.RE +.IP "\(bu" 4 +The symbol name. +.SH "OPTIONS" +.IX Header "OPTIONS" +The long and short forms of options, shown here as alternatives, are +equivalent. +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-o\fR" 4 +.IX Item "-o" +.IP "\fB\-\-print\-file\-name\fR" 4 +.IX Item "--print-file-name" +.PD +Precede each symbol by the name of the input file (or archive member) +in which it was found, rather than identifying the input file once only, +before all of its symbols. +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-debug\-syms\fR" 4 +.IX Item "--debug-syms" +.PD +Display all symbols, even debugger-only symbols; normally these are not +listed. +.IP "\fB\-B\fR" 4 +.IX Item "-B" +The same as \fB\-\-format=bsd\fR (for compatibility with the \s-1MIPS\s0 \fBnm\fR). +.IP "\fB\-C\fR" 4 +.IX Item "-C" +.PD 0 +.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4 +.IX Item "--demangle[=style]" +.PD +Decode (\fIdemangle\fR) low-level symbol names into user-level names. +Besides removing any initial underscore prepended by the system, this +makes \*(C+ function names readable. Different compilers have different +mangling styles. The optional demangling style argument can be used to +choose an appropriate demangling style for your compiler. +.IP "\fB\-\-no\-demangle\fR" 4 +.IX Item "--no-demangle" +Do not demangle low-level symbol names. This is the default. +.IP "\fB\-D\fR" 4 +.IX Item "-D" +.PD 0 +.IP "\fB\-\-dynamic\fR" 4 +.IX Item "--dynamic" +.PD +Display the dynamic symbols rather than the normal symbols. This is +only meaningful for dynamic objects, such as certain types of shared +libraries. +.IP "\fB\-f\fR \fIformat\fR" 4 +.IX Item "-f format" +.PD 0 +.IP "\fB\-\-format=\fR\fIformat\fR" 4 +.IX Item "--format=format" +.PD +Use the output format \fIformat\fR, which can be \f(CW\*(C`bsd\*(C'\fR, +\&\f(CW\*(C`sysv\*(C'\fR, or \f(CW\*(C`posix\*(C'\fR. The default is \f(CW\*(C`bsd\*(C'\fR. +Only the first character of \fIformat\fR is significant; it can be +either upper or lower case. +.IP "\fB\-g\fR" 4 +.IX Item "-g" +.PD 0 +.IP "\fB\-\-extern\-only\fR" 4 +.IX Item "--extern-only" +.PD +Display only external symbols. +.IP "\fB\-\-plugin\fR \fIname\fR" 4 +.IX Item "--plugin name" +Load the plugin called \fIname\fR to add support for extra target +types. This option is only available if the toolchain has been built +with plugin support enabled. +.IP "\fB\-l\fR" 4 +.IX Item "-l" +.PD 0 +.IP "\fB\-\-line\-numbers\fR" 4 +.IX Item "--line-numbers" +.PD +For each symbol, use debugging information to try to find a filename and +line number. For a defined symbol, look for the line number of the +address of the symbol. For an undefined symbol, look for the line +number of a relocation entry which refers to the symbol. If line number +information can be found, print it after the other symbol information. +.IP "\fB\-n\fR" 4 +.IX Item "-n" +.PD 0 +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.IP "\fB\-\-numeric\-sort\fR" 4 +.IX Item "--numeric-sort" +.PD +Sort symbols numerically by their addresses, rather than alphabetically +by their names. +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-no\-sort\fR" 4 +.IX Item "--no-sort" +.PD +Do not bother to sort the symbols in any order; print them in the order +encountered. +.IP "\fB\-P\fR" 4 +.IX Item "-P" +.PD 0 +.IP "\fB\-\-portability\fR" 4 +.IX Item "--portability" +.PD +Use the \s-1POSIX\s0.2 standard output format instead of the default format. +Equivalent to \fB\-f posix\fR. +.IP "\fB\-S\fR" 4 +.IX Item "-S" +.PD 0 +.IP "\fB\-\-print\-size\fR" 4 +.IX Item "--print-size" +.PD +Print both value and size of defined symbols for the \f(CW\*(C`bsd\*(C'\fR output style. +This option has no effect for object formats that do not record symbol +sizes, unless \fB\-\-size\-sort\fR is also used in which case a +calculated size is displayed. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-print\-armap\fR" 4 +.IX Item "--print-armap" +.PD +When listing symbols from archive members, include the index: a mapping +(stored in the archive by \fBar\fR or \fBranlib\fR) of which modules +contain definitions for which names. +.IP "\fB\-r\fR" 4 +.IX Item "-r" +.PD 0 +.IP "\fB\-\-reverse\-sort\fR" 4 +.IX Item "--reverse-sort" +.PD +Reverse the order of the sort (whether numeric or alphabetic); let the +last come first. +.IP "\fB\-\-size\-sort\fR" 4 +.IX Item "--size-sort" +Sort symbols by size. The size is computed as the difference between +the value of the symbol and the value of the symbol with the next higher +value. If the \f(CW\*(C`bsd\*(C'\fR output format is used the size of the symbol +is printed, rather than the value, and \fB\-S\fR must be used in order +both size and value to be printed. +.IP "\fB\-\-special\-syms\fR" 4 +.IX Item "--special-syms" +Display symbols which have a target-specific special meaning. These +symbols are usually used by the target for some special processing and +are not normally helpful when included included in the normal symbol +lists. For example for \s-1ARM\s0 targets this option would skip the mapping +symbols used to mark transitions between \s-1ARM\s0 code, \s-1THUMB\s0 code and +data. +.IP "\fB\-t\fR \fIradix\fR" 4 +.IX Item "-t radix" +.PD 0 +.IP "\fB\-\-radix=\fR\fIradix\fR" 4 +.IX Item "--radix=radix" +.PD +Use \fIradix\fR as the radix for printing the symbol values. It must be +\&\fBd\fR for decimal, \fBo\fR for octal, or \fBx\fR for hexadecimal. +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +Specify an object code format other than your system's default format. +.IP "\fB\-u\fR" 4 +.IX Item "-u" +.PD 0 +.IP "\fB\-\-undefined\-only\fR" 4 +.IX Item "--undefined-only" +.PD +Display only undefined symbols (those external to each object file). +.IP "\fB\-\-defined\-only\fR" 4 +.IX Item "--defined-only" +Display only defined symbols for each object file. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Show the version number of \fBnm\fR and exit. +.IP "\fB\-X\fR" 4 +.IX Item "-X" +This option is ignored for compatibility with the \s-1AIX\s0 version of +\&\fBnm\fR. It takes one parameter which must be the string +\&\fB32_64\fR. The default mode of \s-1AIX\s0 \fBnm\fR corresponds +to \fB\-X 32\fR, which is not supported by \s-1GNU\s0 \fBnm\fR. +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Show a summary of the options to \fBnm\fR and exit. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/objcopy.1 b/binutils/doc/objcopy.1 new file mode 100644 index 0000000..cc041c0 --- /dev/null +++ b/binutils/doc/objcopy.1 @@ -0,0 +1,935 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "OBJCOPY 1" +.TH OBJCOPY 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +objcopy \- copy and translate object files +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +objcopy [\fB\-F\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR] + [\fB\-I\fR \fIbfdname\fR|\fB\-\-input\-target=\fR\fIbfdname\fR] + [\fB\-O\fR \fIbfdname\fR|\fB\-\-output\-target=\fR\fIbfdname\fR] + [\fB\-B\fR \fIbfdarch\fR|\fB\-\-binary\-architecture=\fR\fIbfdarch\fR] + [\fB\-S\fR|\fB\-\-strip\-all\fR] + [\fB\-g\fR|\fB\-\-strip\-debug\fR] + [\fB\-K\fR \fIsymbolname\fR|\fB\-\-keep\-symbol=\fR\fIsymbolname\fR] + [\fB\-N\fR \fIsymbolname\fR|\fB\-\-strip\-symbol=\fR\fIsymbolname\fR] + [\fB\-\-strip\-unneeded\-symbol=\fR\fIsymbolname\fR] + [\fB\-G\fR \fIsymbolname\fR|\fB\-\-keep\-global\-symbol=\fR\fIsymbolname\fR] + [\fB\-\-localize\-hidden\fR] + [\fB\-L\fR \fIsymbolname\fR|\fB\-\-localize\-symbol=\fR\fIsymbolname\fR] + [\fB\-\-globalize\-symbol=\fR\fIsymbolname\fR] + [\fB\-W\fR \fIsymbolname\fR|\fB\-\-weaken\-symbol=\fR\fIsymbolname\fR] + [\fB\-w\fR|\fB\-\-wildcard\fR] + [\fB\-x\fR|\fB\-\-discard\-all\fR] + [\fB\-X\fR|\fB\-\-discard\-locals\fR] + [\fB\-b\fR \fIbyte\fR|\fB\-\-byte=\fR\fIbyte\fR] + [\fB\-i\fR \fIinterleave\fR|\fB\-\-interleave=\fR\fIinterleave\fR] + [\fB\-j\fR \fIsectionname\fR|\fB\-\-only\-section=\fR\fIsectionname\fR] + [\fB\-R\fR \fIsectionname\fR|\fB\-\-remove\-section=\fR\fIsectionname\fR] + [\fB\-p\fR|\fB\-\-preserve\-dates\fR] + [\fB\-\-debugging\fR] + [\fB\-\-gap\-fill=\fR\fIval\fR] + [\fB\-\-pad\-to=\fR\fIaddress\fR] + [\fB\-\-set\-start=\fR\fIval\fR] + [\fB\-\-adjust\-start=\fR\fIincr\fR] + [\fB\-\-change\-addresses=\fR\fIincr\fR] + [\fB\-\-change\-section\-address\fR \fIsection\fR{=,+,\-}\fIval\fR] + [\fB\-\-change\-section\-lma\fR \fIsection\fR{=,+,\-}\fIval\fR] + [\fB\-\-change\-section\-vma\fR \fIsection\fR{=,+,\-}\fIval\fR] + [\fB\-\-change\-warnings\fR] [\fB\-\-no\-change\-warnings\fR] + [\fB\-\-set\-section\-flags\fR \fIsection\fR=\fIflags\fR] + [\fB\-\-add\-section\fR \fIsectionname\fR=\fIfilename\fR] + [\fB\-\-rename\-section\fR \fIoldname\fR=\fInewname\fR[,\fIflags\fR]] + [\fB\-\-long\-section\-names\fR {enable,disable,keep}] + [\fB\-\-change\-leading\-char\fR] [\fB\-\-remove\-leading\-char\fR] + [\fB\-\-reverse\-bytes=\fR\fInum\fR] + [\fB\-\-srec\-len=\fR\fIival\fR] [\fB\-\-srec\-forceS3\fR] + [\fB\-\-redefine\-sym\fR \fIold\fR=\fInew\fR] + [\fB\-\-redefine\-syms=\fR\fIfilename\fR] + [\fB\-\-weaken\fR] + [\fB\-\-keep\-symbols=\fR\fIfilename\fR] + [\fB\-\-strip\-symbols=\fR\fIfilename\fR] + [\fB\-\-strip\-unneeded\-symbols=\fR\fIfilename\fR] + [\fB\-\-keep\-global\-symbols=\fR\fIfilename\fR] + [\fB\-\-localize\-symbols=\fR\fIfilename\fR] + [\fB\-\-globalize\-symbols=\fR\fIfilename\fR] + [\fB\-\-weaken\-symbols=\fR\fIfilename\fR] + [\fB\-\-alt\-machine\-code=\fR\fIindex\fR] + [\fB\-\-prefix\-symbols=\fR\fIstring\fR] + [\fB\-\-prefix\-sections=\fR\fIstring\fR] + [\fB\-\-prefix\-alloc\-sections=\fR\fIstring\fR] + [\fB\-\-add\-gnu\-debuglink=\fR\fIpath-to-file\fR] + [\fB\-\-keep\-file\-symbols\fR] + [\fB\-\-only\-keep\-debug\fR] + [\fB\-\-extract\-symbol\fR] + [\fB\-\-writable\-text\fR] + [\fB\-\-readonly\-text\fR] + [\fB\-\-pure\fR] + [\fB\-\-impure\fR] + [\fB\-\-file\-alignment=\fR\fInum\fR] + [\fB\-\-heap=\fR\fIsize\fR] + [\fB\-\-image\-base=\fR\fIaddress\fR] + [\fB\-\-section\-alignment=\fR\fInum\fR] + [\fB\-\-stack=\fR\fIsize\fR] + [\fB\-\-subsystem=\fR\fIwhich\fR:\fImajor\fR.\fIminor\fR] + [\fB\-v\fR|\fB\-\-verbose\fR] + [\fB\-V\fR|\fB\-\-version\fR] + [\fB\-\-help\fR] [\fB\-\-info\fR] + \fIinfile\fR [\fIoutfile\fR] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +The \s-1GNU\s0 \fBobjcopy\fR utility copies the contents of an object +file to another. \fBobjcopy\fR uses the \s-1GNU\s0 \s-1BFD\s0 Library to +read and write the object files. It can write the destination object +file in a format different from that of the source object file. The +exact behavior of \fBobjcopy\fR is controlled by command-line options. +Note that \fBobjcopy\fR should be able to copy a fully linked file +between any two formats. However, copying a relocatable object file +between any two formats may not work as expected. +.PP +\&\fBobjcopy\fR creates temporary files to do its translations and +deletes them afterward. \fBobjcopy\fR uses \s-1BFD\s0 to do all its +translation work; it has access to all the formats described in \s-1BFD\s0 +and thus is able to recognize most formats without being told +explicitly. +.PP +\&\fBobjcopy\fR can be used to generate S\-records by using an output +target of \fBsrec\fR (e.g., use \fB\-O srec\fR). +.PP +\&\fBobjcopy\fR can be used to generate a raw binary file by using an +output target of \fBbinary\fR (e.g., use \fB\-O binary\fR). When +\&\fBobjcopy\fR generates a raw binary file, it will essentially produce +a memory dump of the contents of the input object file. All symbols and +relocation information will be discarded. The memory dump will start at +the load address of the lowest section copied into the output file. +.PP +When generating an S\-record or a raw binary file, it may be helpful to +use \fB\-S\fR to remove sections containing debugging information. In +some cases \fB\-R\fR will be useful to remove sections which contain +information that is not needed by the binary file. +.PP +Note\-\-\-\fBobjcopy\fR is not able to change the endianness of its input +files. If the input format has an endianness (some formats do not), +\&\fBobjcopy\fR can only copy the inputs into file formats that have the +same endianness or which have no endianness (e.g., \fBsrec\fR). +(However, see the \fB\-\-reverse\-bytes\fR option.) +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fIinfile\fR" 4 +.IX Item "infile" +.PD 0 +.IP "\fIoutfile\fR" 4 +.IX Item "outfile" +.PD +The input and output files, respectively. +If you do not specify \fIoutfile\fR, \fBobjcopy\fR creates a +temporary file and destructively renames the result with +the name of \fIinfile\fR. +.IP "\fB\-I\fR \fIbfdname\fR" 4 +.IX Item "-I bfdname" +.PD 0 +.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4 +.IX Item "--input-target=bfdname" +.PD +Consider the source file's object format to be \fIbfdname\fR, rather than +attempting to deduce it. +.IP "\fB\-O\fR \fIbfdname\fR" 4 +.IX Item "-O bfdname" +.PD 0 +.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4 +.IX Item "--output-target=bfdname" +.PD +Write the output file using the object format \fIbfdname\fR. +.IP "\fB\-F\fR \fIbfdname\fR" 4 +.IX Item "-F bfdname" +.PD 0 +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +.PD +Use \fIbfdname\fR as the object format for both the input and the output +file; i.e., simply transfer data from source to destination with no +translation. +.IP "\fB\-B\fR \fIbfdarch\fR" 4 +.IX Item "-B bfdarch" +.PD 0 +.IP "\fB\-\-binary\-architecture=\fR\fIbfdarch\fR" 4 +.IX Item "--binary-architecture=bfdarch" +.PD +Useful when transforming a raw binary input file into an object file. +In this case the output architecture can be set to \fIbfdarch\fR. This +option will be ignored if the input file has a known \fIbfdarch\fR. You +can access this binary data inside a program by referencing the special +symbols that are created by the conversion process. These symbols are +called _binary_\fIobjfile\fR_start, _binary_\fIobjfile\fR_end and +_binary_\fIobjfile\fR_size. e.g. you can transform a picture file into +an object file and then access it in your code using these symbols. +.IP "\fB\-j\fR \fIsectionname\fR" 4 +.IX Item "-j sectionname" +.PD 0 +.IP "\fB\-\-only\-section=\fR\fIsectionname\fR" 4 +.IX Item "--only-section=sectionname" +.PD +Copy only the named section from the input file to the output file. +This option may be given more than once. Note that using this option +inappropriately may make the output file unusable. +.IP "\fB\-R\fR \fIsectionname\fR" 4 +.IX Item "-R sectionname" +.PD 0 +.IP "\fB\-\-remove\-section=\fR\fIsectionname\fR" 4 +.IX Item "--remove-section=sectionname" +.PD +Remove any section named \fIsectionname\fR from the output file. This +option may be given more than once. Note that using this option +inappropriately may make the output file unusable. +.IP "\fB\-S\fR" 4 +.IX Item "-S" +.PD 0 +.IP "\fB\-\-strip\-all\fR" 4 +.IX Item "--strip-all" +.PD +Do not copy relocation and symbol information from the source file. +.IP "\fB\-g\fR" 4 +.IX Item "-g" +.PD 0 +.IP "\fB\-\-strip\-debug\fR" 4 +.IX Item "--strip-debug" +.PD +Do not copy debugging symbols or sections from the source file. +.IP "\fB\-\-strip\-unneeded\fR" 4 +.IX Item "--strip-unneeded" +Strip all symbols that are not needed for relocation processing. +.IP "\fB\-K\fR \fIsymbolname\fR" 4 +.IX Item "-K symbolname" +.PD 0 +.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--keep-symbol=symbolname" +.PD +When stripping symbols, keep symbol \fIsymbolname\fR even if it would +normally be stripped. This option may be given more than once. +.IP "\fB\-N\fR \fIsymbolname\fR" 4 +.IX Item "-N symbolname" +.PD 0 +.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--strip-symbol=symbolname" +.PD +Do not copy symbol \fIsymbolname\fR from the source file. This option +may be given more than once. +.IP "\fB\-\-strip\-unneeded\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--strip-unneeded-symbol=symbolname" +Do not copy symbol \fIsymbolname\fR from the source file unless it is needed +by a relocation. This option may be given more than once. +.IP "\fB\-G\fR \fIsymbolname\fR" 4 +.IX Item "-G symbolname" +.PD 0 +.IP "\fB\-\-keep\-global\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--keep-global-symbol=symbolname" +.PD +Keep only symbol \fIsymbolname\fR global. Make all other symbols local +to the file, so that they are not visible externally. This option may +be given more than once. +.IP "\fB\-\-localize\-hidden\fR" 4 +.IX Item "--localize-hidden" +In an \s-1ELF\s0 object, mark all symbols that have hidden or internal visibility +as local. This option applies on top of symbol-specific localization options +such as \fB\-L\fR. +.IP "\fB\-L\fR \fIsymbolname\fR" 4 +.IX Item "-L symbolname" +.PD 0 +.IP "\fB\-\-localize\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--localize-symbol=symbolname" +.PD +Make symbol \fIsymbolname\fR local to the file, so that it is not +visible externally. This option may be given more than once. +.IP "\fB\-W\fR \fIsymbolname\fR" 4 +.IX Item "-W symbolname" +.PD 0 +.IP "\fB\-\-weaken\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--weaken-symbol=symbolname" +.PD +Make symbol \fIsymbolname\fR weak. This option may be given more than once. +.IP "\fB\-\-globalize\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--globalize-symbol=symbolname" +Give symbol \fIsymbolname\fR global scoping so that it is visible +outside of the file in which it is defined. This option may be given +more than once. +.IP "\fB\-w\fR" 4 +.IX Item "-w" +.PD 0 +.IP "\fB\-\-wildcard\fR" 4 +.IX Item "--wildcard" +.PD +Permit regular expressions in \fIsymbolname\fRs used in other command +line options. The question mark (?), asterisk (*), backslash (\e) and +square brackets ([]) operators can be used anywhere in the symbol +name. If the first character of the symbol name is the exclamation +point (!) then the sense of the switch is reversed for that symbol. +For example: +.Sp +.Vb 1 +\& \-w \-W !foo \-W fo* +.Ve +.Sp +would cause objcopy to weaken all symbols that start with \*(L"fo\*(R" +except for the symbol \*(L"foo\*(R". +.IP "\fB\-x\fR" 4 +.IX Item "-x" +.PD 0 +.IP "\fB\-\-discard\-all\fR" 4 +.IX Item "--discard-all" +.PD +Do not copy non-global symbols from the source file. +.IP "\fB\-X\fR" 4 +.IX Item "-X" +.PD 0 +.IP "\fB\-\-discard\-locals\fR" 4 +.IX Item "--discard-locals" +.PD +Do not copy compiler-generated local symbols. +(These usually start with \fBL\fR or \fB.\fR.) +.IP "\fB\-b\fR \fIbyte\fR" 4 +.IX Item "-b byte" +.PD 0 +.IP "\fB\-\-byte=\fR\fIbyte\fR" 4 +.IX Item "--byte=byte" +.PD +Keep only every \fIbyte\fRth byte of the input file (header data is not +affected). \fIbyte\fR can be in the range from 0 to \fIinterleave\fR\-1, +where \fIinterleave\fR is given by the \fB\-i\fR or \fB\-\-interleave\fR +option, or the default of 4. This option is useful for creating files +to program \s-1ROM\s0. It is typically used with an \f(CW\*(C`srec\*(C'\fR output +target. +.IP "\fB\-i\fR \fIinterleave\fR" 4 +.IX Item "-i interleave" +.PD 0 +.IP "\fB\-\-interleave=\fR\fIinterleave\fR" 4 +.IX Item "--interleave=interleave" +.PD +Only copy one out of every \fIinterleave\fR bytes. Select which byte to +copy with the \fB\-b\fR or \fB\-\-byte\fR option. The default is 4. +\&\fBobjcopy\fR ignores this option if you do not specify either \fB\-b\fR or +\&\fB\-\-byte\fR. +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-preserve\-dates\fR" 4 +.IX Item "--preserve-dates" +.PD +Set the access and modification dates of the output file to be the same +as those of the input file. +.IP "\fB\-\-debugging\fR" 4 +.IX Item "--debugging" +Convert debugging information, if possible. This is not the default +because only certain debugging formats are supported, and the +conversion process can be time consuming. +.IP "\fB\-\-gap\-fill\fR \fIval\fR" 4 +.IX Item "--gap-fill val" +Fill gaps between sections with \fIval\fR. This operation applies to +the \fIload address\fR (\s-1LMA\s0) of the sections. It is done by increasing +the size of the section with the lower address, and filling in the extra +space created with \fIval\fR. +.IP "\fB\-\-pad\-to\fR \fIaddress\fR" 4 +.IX Item "--pad-to address" +Pad the output file up to the load address \fIaddress\fR. This is +done by increasing the size of the last section. The extra space is +filled in with the value specified by \fB\-\-gap\-fill\fR (default zero). +.IP "\fB\-\-set\-start\fR \fIval\fR" 4 +.IX Item "--set-start val" +Set the start address of the new file to \fIval\fR. Not all object file +formats support setting the start address. +.IP "\fB\-\-change\-start\fR \fIincr\fR" 4 +.IX Item "--change-start incr" +.PD 0 +.IP "\fB\-\-adjust\-start\fR \fIincr\fR" 4 +.IX Item "--adjust-start incr" +.PD +Change the start address by adding \fIincr\fR. Not all object file +formats support setting the start address. +.IP "\fB\-\-change\-addresses\fR \fIincr\fR" 4 +.IX Item "--change-addresses incr" +.PD 0 +.IP "\fB\-\-adjust\-vma\fR \fIincr\fR" 4 +.IX Item "--adjust-vma incr" +.PD +Change the \s-1VMA\s0 and \s-1LMA\s0 addresses of all sections, as well as the start +address, by adding \fIincr\fR. Some object file formats do not permit +section addresses to be changed arbitrarily. Note that this does not +relocate the sections; if the program expects sections to be loaded at a +certain address, and this option is used to change the sections such +that they are loaded at a different address, the program may fail. +.IP "\fB\-\-change\-section\-address\fR \fIsection\fR\fB{=,+,\-}\fR\fIval\fR" 4 +.IX Item "--change-section-address section{=,+,-}val" +.PD 0 +.IP "\fB\-\-adjust\-section\-vma\fR \fIsection\fR\fB{=,+,\-}\fR\fIval\fR" 4 +.IX Item "--adjust-section-vma section{=,+,-}val" +.PD +Set or change both the \s-1VMA\s0 address and the \s-1LMA\s0 address of the named +\&\fIsection\fR. If \fB=\fR is used, the section address is set to +\&\fIval\fR. Otherwise, \fIval\fR is added to or subtracted from the +section address. See the comments under \fB\-\-change\-addresses\fR, +above. If \fIsection\fR does not exist in the input file, a warning will +be issued, unless \fB\-\-no\-change\-warnings\fR is used. +.IP "\fB\-\-change\-section\-lma\fR \fIsection\fR\fB{=,+,\-}\fR\fIval\fR" 4 +.IX Item "--change-section-lma section{=,+,-}val" +Set or change the \s-1LMA\s0 address of the named \fIsection\fR. The \s-1LMA\s0 +address is the address where the section will be loaded into memory at +program load time. Normally this is the same as the \s-1VMA\s0 address, which +is the address of the section at program run time, but on some systems, +especially those where a program is held in \s-1ROM\s0, the two can be +different. If \fB=\fR is used, the section address is set to +\&\fIval\fR. Otherwise, \fIval\fR is added to or subtracted from the +section address. See the comments under \fB\-\-change\-addresses\fR, +above. If \fIsection\fR does not exist in the input file, a warning +will be issued, unless \fB\-\-no\-change\-warnings\fR is used. +.IP "\fB\-\-change\-section\-vma\fR \fIsection\fR\fB{=,+,\-}\fR\fIval\fR" 4 +.IX Item "--change-section-vma section{=,+,-}val" +Set or change the \s-1VMA\s0 address of the named \fIsection\fR. The \s-1VMA\s0 +address is the address where the section will be located once the +program has started executing. Normally this is the same as the \s-1LMA\s0 +address, which is the address where the section will be loaded into +memory, but on some systems, especially those where a program is held in +\&\s-1ROM\s0, the two can be different. If \fB=\fR is used, the section address +is set to \fIval\fR. Otherwise, \fIval\fR is added to or subtracted +from the section address. See the comments under +\&\fB\-\-change\-addresses\fR, above. If \fIsection\fR does not exist in +the input file, a warning will be issued, unless +\&\fB\-\-no\-change\-warnings\fR is used. +.IP "\fB\-\-change\-warnings\fR" 4 +.IX Item "--change-warnings" +.PD 0 +.IP "\fB\-\-adjust\-warnings\fR" 4 +.IX Item "--adjust-warnings" +.PD +If \fB\-\-change\-section\-address\fR or \fB\-\-change\-section\-lma\fR or +\&\fB\-\-change\-section\-vma\fR is used, and the named section does not +exist, issue a warning. This is the default. +.IP "\fB\-\-no\-change\-warnings\fR" 4 +.IX Item "--no-change-warnings" +.PD 0 +.IP "\fB\-\-no\-adjust\-warnings\fR" 4 +.IX Item "--no-adjust-warnings" +.PD +Do not issue a warning if \fB\-\-change\-section\-address\fR or +\&\fB\-\-adjust\-section\-lma\fR or \fB\-\-adjust\-section\-vma\fR is used, even +if the named section does not exist. +.IP "\fB\-\-set\-section\-flags\fR \fIsection\fR\fB=\fR\fIflags\fR" 4 +.IX Item "--set-section-flags section=flags" +Set the flags for the named section. The \fIflags\fR argument is a +comma separated string of flag names. The recognized names are +\&\fBalloc\fR, \fBcontents\fR, \fBload\fR, \fBnoload\fR, +\&\fBreadonly\fR, \fBcode\fR, \fBdata\fR, \fBrom\fR, \fBshare\fR, and +\&\fBdebug\fR. You can set the \fBcontents\fR flag for a section which +does not have contents, but it is not meaningful to clear the +\&\fBcontents\fR flag of a section which does have contents\*(--just remove +the section instead. Not all flags are meaningful for all object file +formats. +.IP "\fB\-\-add\-section\fR \fIsectionname\fR\fB=\fR\fIfilename\fR" 4 +.IX Item "--add-section sectionname=filename" +Add a new section named \fIsectionname\fR while copying the file. The +contents of the new section are taken from the file \fIfilename\fR. The +size of the section will be the size of the file. This option only +works on file formats which can support sections with arbitrary names. +.IP "\fB\-\-rename\-section\fR \fIoldname\fR\fB=\fR\fInewname\fR\fB[,\fR\fIflags\fR\fB]\fR" 4 +.IX Item "--rename-section oldname=newname[,flags]" +Rename a section from \fIoldname\fR to \fInewname\fR, optionally +changing the section's flags to \fIflags\fR in the process. This has +the advantage over usng a linker script to perform the rename in that +the output stays as an object file and does not become a linked +executable. +.Sp +This option is particularly helpful when the input format is binary, +since this will always create a section called .data. If for example, +you wanted instead to create a section called .rodata containing binary +data you could use the following command line to achieve it: +.Sp +.Vb 3 +\& objcopy \-I binary \-O <output_format> \-B <architecture> \e +\& \-\-rename\-section .data=.rodata,alloc,load,readonly,data,contents \e +\& <input_binary_file> <output_object_file> +.Ve +.IP "\fB\-\-long\-section\-names {enable,disable,keep}\fR" 4 +.IX Item "--long-section-names {enable,disable,keep}" +Controls the handling of long section names when processing \f(CW\*(C`COFF\*(C'\fR +and \f(CW\*(C`PE\-COFF\*(C'\fR object formats. The default behaviour, \fBkeep\fR, +is to preserve long section names if any are present in the input file. +The \fBenable\fR and \fBdisable\fR options forcibly enable or disable +the use of long section names in the output object; when \fBdisable\fR +is in effect, any long section names in the input object will be truncated. +The \fBenable\fR option will only emit long section names if any are +present in the inputs; this is mostly the same as \fBkeep\fR, but it +is left undefined whether the \fBenable\fR option might force the +creation of an empty string table in the output file. +.IP "\fB\-\-change\-leading\-char\fR" 4 +.IX Item "--change-leading-char" +Some object file formats use special characters at the start of +symbols. The most common such character is underscore, which compilers +often add before every symbol. This option tells \fBobjcopy\fR to +change the leading character of every symbol when it converts between +object file formats. If the object file formats use the same leading +character, this option has no effect. Otherwise, it will add a +character, or remove a character, or change a character, as +appropriate. +.IP "\fB\-\-remove\-leading\-char\fR" 4 +.IX Item "--remove-leading-char" +If the first character of a global symbol is a special symbol leading +character used by the object file format, remove the character. The +most common symbol leading character is underscore. This option will +remove a leading underscore from all global symbols. This can be useful +if you want to link together objects of different file formats with +different conventions for symbol names. This is different from +\&\fB\-\-change\-leading\-char\fR because it always changes the symbol name +when appropriate, regardless of the object file format of the output +file. +.IP "\fB\-\-reverse\-bytes=\fR\fInum\fR" 4 +.IX Item "--reverse-bytes=num" +Reverse the bytes in a section with output contents. A section length must +be evenly divisible by the value given in order for the swap to be able to +take place. Reversing takes place before the interleaving is performed. +.Sp +This option is used typically in generating \s-1ROM\s0 images for problematic +target systems. For example, on some target boards, the 32\-bit words +fetched from 8\-bit ROMs are re-assembled in little-endian byte order +regardless of the \s-1CPU\s0 byte order. Depending on the programming model, the +endianness of the \s-1ROM\s0 may need to be modified. +.Sp +Consider a simple file with a section containing the following eight +bytes: \f(CW12345678\fR. +.Sp +Using \fB\-\-reverse\-bytes=2\fR for the above example, the bytes in the +output file would be ordered \f(CW21436587\fR. +.Sp +Using \fB\-\-reverse\-bytes=4\fR for the above example, the bytes in the +output file would be ordered \f(CW43218765\fR. +.Sp +By using \fB\-\-reverse\-bytes=2\fR for the above example, followed by +\&\fB\-\-reverse\-bytes=4\fR on the output file, the bytes in the second +output file would be ordered \f(CW34127856\fR. +.IP "\fB\-\-srec\-len=\fR\fIival\fR" 4 +.IX Item "--srec-len=ival" +Meaningful only for srec output. Set the maximum length of the Srecords +being produced to \fIival\fR. This length covers both address, data and +crc fields. +.IP "\fB\-\-srec\-forceS3\fR" 4 +.IX Item "--srec-forceS3" +Meaningful only for srec output. Avoid generation of S1/S2 records, +creating S3\-only record format. +.IP "\fB\-\-redefine\-sym\fR \fIold\fR\fB=\fR\fInew\fR" 4 +.IX Item "--redefine-sym old=new" +Change the name of a symbol \fIold\fR, to \fInew\fR. This can be useful +when one is trying link two things together for which you have no +source, and there are name collisions. +.IP "\fB\-\-redefine\-syms=\fR\fIfilename\fR" 4 +.IX Item "--redefine-syms=filename" +Apply \fB\-\-redefine\-sym\fR to each symbol pair "\fIold\fR \fInew\fR" +listed in the file \fIfilename\fR. \fIfilename\fR is simply a flat file, +with one symbol pair per line. Line comments may be introduced by the hash +character. This option may be given more than once. +.IP "\fB\-\-weaken\fR" 4 +.IX Item "--weaken" +Change all global symbols in the file to be weak. This can be useful +when building an object which will be linked against other objects using +the \fB\-R\fR option to the linker. This option is only effective when +using an object file format which supports weak symbols. +.IP "\fB\-\-keep\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--keep-symbols=filename" +Apply \fB\-\-keep\-symbol\fR option to each symbol listed in the file +\&\fIfilename\fR. \fIfilename\fR is simply a flat file, with one symbol +name per line. Line comments may be introduced by the hash character. +This option may be given more than once. +.IP "\fB\-\-strip\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--strip-symbols=filename" +Apply \fB\-\-strip\-symbol\fR option to each symbol listed in the file +\&\fIfilename\fR. \fIfilename\fR is simply a flat file, with one symbol +name per line. Line comments may be introduced by the hash character. +This option may be given more than once. +.IP "\fB\-\-strip\-unneeded\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--strip-unneeded-symbols=filename" +Apply \fB\-\-strip\-unneeded\-symbol\fR option to each symbol listed in +the file \fIfilename\fR. \fIfilename\fR is simply a flat file, with one +symbol name per line. Line comments may be introduced by the hash +character. This option may be given more than once. +.IP "\fB\-\-keep\-global\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--keep-global-symbols=filename" +Apply \fB\-\-keep\-global\-symbol\fR option to each symbol listed in the +file \fIfilename\fR. \fIfilename\fR is simply a flat file, with one +symbol name per line. Line comments may be introduced by the hash +character. This option may be given more than once. +.IP "\fB\-\-localize\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--localize-symbols=filename" +Apply \fB\-\-localize\-symbol\fR option to each symbol listed in the file +\&\fIfilename\fR. \fIfilename\fR is simply a flat file, with one symbol +name per line. Line comments may be introduced by the hash character. +This option may be given more than once. +.IP "\fB\-\-globalize\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--globalize-symbols=filename" +Apply \fB\-\-globalize\-symbol\fR option to each symbol listed in the file +\&\fIfilename\fR. \fIfilename\fR is simply a flat file, with one symbol +name per line. Line comments may be introduced by the hash character. +This option may be given more than once. +.IP "\fB\-\-weaken\-symbols=\fR\fIfilename\fR" 4 +.IX Item "--weaken-symbols=filename" +Apply \fB\-\-weaken\-symbol\fR option to each symbol listed in the file +\&\fIfilename\fR. \fIfilename\fR is simply a flat file, with one symbol +name per line. Line comments may be introduced by the hash character. +This option may be given more than once. +.IP "\fB\-\-alt\-machine\-code=\fR\fIindex\fR" 4 +.IX Item "--alt-machine-code=index" +If the output architecture has alternate machine codes, use the +\&\fIindex\fRth code instead of the default one. This is useful in case +a machine is assigned an official code and the tool-chain adopts the +new code, but other applications still depend on the original code +being used. For \s-1ELF\s0 based architectures if the \fIindex\fR +alternative does not exist then the value is treated as an absolute +number to be stored in the e_machine field of the \s-1ELF\s0 header. +.IP "\fB\-\-writable\-text\fR" 4 +.IX Item "--writable-text" +Mark the output text as writable. This option isn't meaningful for all +object file formats. +.IP "\fB\-\-readonly\-text\fR" 4 +.IX Item "--readonly-text" +Make the output text write protected. This option isn't meaningful for all +object file formats. +.IP "\fB\-\-pure\fR" 4 +.IX Item "--pure" +Mark the output file as demand paged. This option isn't meaningful for all +object file formats. +.IP "\fB\-\-impure\fR" 4 +.IX Item "--impure" +Mark the output file as impure. This option isn't meaningful for all +object file formats. +.IP "\fB\-\-prefix\-symbols=\fR\fIstring\fR" 4 +.IX Item "--prefix-symbols=string" +Prefix all symbols in the output file with \fIstring\fR. +.IP "\fB\-\-prefix\-sections=\fR\fIstring\fR" 4 +.IX Item "--prefix-sections=string" +Prefix all section names in the output file with \fIstring\fR. +.IP "\fB\-\-prefix\-alloc\-sections=\fR\fIstring\fR" 4 +.IX Item "--prefix-alloc-sections=string" +Prefix all the names of all allocated sections in the output file with +\&\fIstring\fR. +.IP "\fB\-\-add\-gnu\-debuglink=\fR\fIpath-to-file\fR" 4 +.IX Item "--add-gnu-debuglink=path-to-file" +Creates a .gnu_debuglink section which contains a reference to \fIpath-to-file\fR +and adds it to the output file. +.IP "\fB\-\-keep\-file\-symbols\fR" 4 +.IX Item "--keep-file-symbols" +When stripping a file, perhaps with \fB\-\-strip\-debug\fR or +\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names, +which would otherwise get stripped. +.IP "\fB\-\-only\-keep\-debug\fR" 4 +.IX Item "--only-keep-debug" +Strip a file, removing contents of any sections that would not be +stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections +intact. In \s-1ELF\s0 files, this preserves all note sections in the output. +.Sp +The intention is that this option will be used in conjunction with +\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable. One a +stripped binary which will occupy less space in \s-1RAM\s0 and in a +distribution and the second a debugging information file which is only +needed if debugging abilities are required. The suggested procedure +to create these files is as follows: +.RS 4 +.IP "1.<Link the executable as normal. Assuming that is is called>" 4 +.IX Item "1.<Link the executable as normal. Assuming that is is called>" +\&\f(CW\*(C`foo\*(C'\fR then... +.ie n .IP "1.<Run ""objcopy \-\-only\-keep\-debug foo foo.dbg"" to>" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-only\-keep\-debug foo foo.dbg\fR to>" 4 +.IX Item "1.<Run objcopy --only-keep-debug foo foo.dbg to>" +create a file containing the debugging info. +.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"" to create a>" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR to create a>" 4 +.IX Item "1.<Run objcopy --strip-debug foo to create a>" +stripped executable. +.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.dbg foo"">" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.dbg foo\fR>" 4 +.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.dbg foo>" +to add a link to the debugging info into the stripped executable. +.RE +.RS 4 +.Sp +Note\-\-\-the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info +file is arbitrary. Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is +optional. You could instead do this: +.IP "1.<Link the executable as normal.>" 4 +.IX Item "1.<Link the executable as normal.>" +.PD 0 +.ie n .IP "1.<Copy ""foo""\fR to \f(CW""foo.full"">" 4 +.el .IP "1.<Copy \f(CWfoo\fR to \f(CWfoo.full\fR>" 4 +.IX Item "1.<Copy foo to foo.full>" +.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"">" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR>" 4 +.IX Item "1.<Run objcopy --strip-debug foo>" +.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.full foo"">" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.full foo\fR>" 4 +.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.full foo>" +.RE +.RS 4 +.PD +.Sp +i.e., the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the +full executable. It does not have to be a file created by the +\&\fB\-\-only\-keep\-debug\fR switch. +.Sp +Note\-\-\-this switch is only intended for use on fully linked files. It +does not make sense to use it on object files where the debugging +information may be incomplete. Besides the gnu_debuglink feature +currently only supports the presence of one filename containing +debugging information, not multiple filenames on a one-per-object-file +basis. +.RE +.IP "\fB\-\-file\-alignment\fR \fInum\fR" 4 +.IX Item "--file-alignment num" +Specify the file alignment. Sections in the file will always begin at +file offsets which are multiples of this number. This defaults to +512. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-heap\fR \fIreserve\fR" 4 +.IX Item "--heap reserve" +.PD 0 +.IP "\fB\-\-heap\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4 +.IX Item "--heap reserve,commit" +.PD +Specify the number of bytes of memory to reserve (and optionally commit) +to be used as heap for this program. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-image\-base\fR \fIvalue\fR" 4 +.IX Item "--image-base value" +Use \fIvalue\fR as the base address of your program or dll. This is +the lowest memory location that will be used when your program or dll +is loaded. To reduce the need to relocate and improve performance of +your dlls, each should have a unique base address and not overlap any +other dlls. The default is 0x400000 for executables, and 0x10000000 +for dlls. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-section\-alignment\fR \fInum\fR" 4 +.IX Item "--section-alignment num" +Sets the section alignment. Sections in memory will always begin at +addresses which are a multiple of this number. Defaults to 0x1000. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-stack\fR \fIreserve\fR" 4 +.IX Item "--stack reserve" +.PD 0 +.IP "\fB\-\-stack\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4 +.IX Item "--stack reserve,commit" +.PD +Specify the number of bytes of memory to reserve (and optionally commit) +to be used as stack for this program. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-subsystem\fR \fIwhich\fR" 4 +.IX Item "--subsystem which" +.PD 0 +.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR" 4 +.IX Item "--subsystem which:major" +.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR\fB.\fR\fIminor\fR" 4 +.IX Item "--subsystem which:major.minor" +.PD +Specifies the subsystem under which your program will execute. The +legal values for \fIwhich\fR are \f(CW\*(C`native\*(C'\fR, \f(CW\*(C`windows\*(C'\fR, +\&\f(CW\*(C`console\*(C'\fR, \f(CW\*(C`posix\*(C'\fR, \f(CW\*(C`efi\-app\*(C'\fR, \f(CW\*(C`efi\-bsd\*(C'\fR, +\&\f(CW\*(C`efi\-rtd\*(C'\fR, \f(CW\*(C`sal\-rtd\*(C'\fR, and \f(CW\*(C`xbox\*(C'\fR. You may optionally set +the subsystem version also. Numeric values are also accepted for +\&\fIwhich\fR. +[This option is specific to \s-1PE\s0 targets.] +.IP "\fB\-\-extract\-symbol\fR" 4 +.IX Item "--extract-symbol" +Keep the file's section flags and symbols but remove all section data. +Specifically, the option: +.RS 4 +.IP "*<removes the contents of all sections;>" 4 +.IX Item "*<removes the contents of all sections;>" +.PD 0 +.IP "*<sets the size of every section to zero; and>" 4 +.IX Item "*<sets the size of every section to zero; and>" +.IP "*<sets the file's start address to zero.>" 4 +.IX Item "*<sets the file's start address to zero.>" +.RE +.RS 4 +.PD +.Sp +This option is used to build a \fI.sym\fR file for a VxWorks kernel. +It can also be a useful way of reducing the size of a \fB\-\-just\-symbols\fR +linker input file. +.RE +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Show the version number of \fBobjcopy\fR. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-verbose\fR" 4 +.IX Item "--verbose" +.PD +Verbose output: list all object files modified. In the case of +archives, \fBobjcopy \-V\fR lists all members of the archive. +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Show a summary of the options to \fBobjcopy\fR. +.IP "\fB\-\-info\fR" 4 +.IX Item "--info" +Display a list showing all architectures and object formats available. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIld\fR\|(1), \fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/objdump.1 b/binutils/doc/objdump.1 new file mode 100644 index 0000000..3c0298d --- /dev/null +++ b/binutils/doc/objdump.1 @@ -0,0 +1,803 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "OBJDUMP 1" +.TH OBJDUMP 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +objdump \- display information from object files. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +objdump [\fB\-a\fR|\fB\-\-archive\-headers\fR] + [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR] + [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR] ] + [\fB\-d\fR|\fB\-\-disassemble\fR] + [\fB\-D\fR|\fB\-\-disassemble\-all\fR] + [\fB\-z\fR|\fB\-\-disassemble\-zeroes\fR] + [\fB\-EB\fR|\fB\-EL\fR|\fB\-\-endian=\fR{big | little }] + [\fB\-f\fR|\fB\-\-file\-headers\fR] + [\fB\-F\fR|\fB\-\-file\-offsets\fR] + [\fB\-\-file\-start\-context\fR] + [\fB\-g\fR|\fB\-\-debugging\fR] + [\fB\-e\fR|\fB\-\-debugging\-tags\fR] + [\fB\-h\fR|\fB\-\-section\-headers\fR|\fB\-\-headers\fR] + [\fB\-i\fR|\fB\-\-info\fR] + [\fB\-j\fR \fIsection\fR|\fB\-\-section=\fR\fIsection\fR] + [\fB\-l\fR|\fB\-\-line\-numbers\fR] + [\fB\-S\fR|\fB\-\-source\fR] + [\fB\-m\fR \fImachine\fR|\fB\-\-architecture=\fR\fImachine\fR] + [\fB\-M\fR \fIoptions\fR|\fB\-\-disassembler\-options=\fR\fIoptions\fR] + [\fB\-p\fR|\fB\-\-private\-headers\fR] + [\fB\-r\fR|\fB\-\-reloc\fR] + [\fB\-R\fR|\fB\-\-dynamic\-reloc\fR] + [\fB\-s\fR|\fB\-\-full\-contents\fR] + [\fB\-W[lLiaprmfFsoR]\fR| + \fB\-\-dwarf\fR[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]] + [\fB\-G\fR|\fB\-\-stabs\fR] + [\fB\-t\fR|\fB\-\-syms\fR] + [\fB\-T\fR|\fB\-\-dynamic\-syms\fR] + [\fB\-x\fR|\fB\-\-all\-headers\fR] + [\fB\-w\fR|\fB\-\-wide\fR] + [\fB\-\-start\-address=\fR\fIaddress\fR] + [\fB\-\-stop\-address=\fR\fIaddress\fR] + [\fB\-\-prefix\-addresses\fR] + [\fB\-\-[no\-]show\-raw\-insn\fR] + [\fB\-\-adjust\-vma=\fR\fIoffset\fR] + [\fB\-\-special\-syms\fR] + [\fB\-\-prefix=\fR\fIprefix\fR] + [\fB\-\-prefix\-strip=\fR\fIlevel\fR] + [\fB\-\-insn\-width=\fR\fIwidth\fR] + [\fB\-V\fR|\fB\-\-version\fR] + [\fB\-H\fR|\fB\-\-help\fR] + \fIobjfile\fR... +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBobjdump\fR displays information about one or more object files. +The options control what particular information to display. This +information is mostly useful to programmers who are working on the +compilation tools, as opposed to programmers who just want their +program to compile and work. +.PP +\&\fIobjfile\fR... are the object files to be examined. When you +specify archives, \fBobjdump\fR shows information on each of the member +object files. +.SH "OPTIONS" +.IX Header "OPTIONS" +The long and short forms of options, shown here as alternatives, are +equivalent. At least one option from the list +\&\fB\-a,\-d,\-D,\-e,\-f,\-g,\-G,\-h,\-H,\-p,\-r,\-R,\-s,\-S,\-t,\-T,\-V,\-x\fR must be given. +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-archive\-header\fR" 4 +.IX Item "--archive-header" +.PD +If any of the \fIobjfile\fR files are archives, display the archive +header information (in a format similar to \fBls \-l\fR). Besides the +information you could list with \fBar tv\fR, \fBobjdump \-a\fR shows +the object file format of each archive member. +.IP "\fB\-\-adjust\-vma=\fR\fIoffset\fR" 4 +.IX Item "--adjust-vma=offset" +When dumping information, first add \fIoffset\fR to all the section +addresses. This is useful if the section addresses do not correspond to +the symbol table, which can happen when putting sections at particular +addresses when using a format which can not represent section addresses, +such as a.out. +.IP "\fB\-b\fR \fIbfdname\fR" 4 +.IX Item "-b bfdname" +.PD 0 +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +.PD +Specify that the object-code format for the object files is +\&\fIbfdname\fR. This option may not be necessary; \fIobjdump\fR can +automatically recognize many formats. +.Sp +For example, +.Sp +.Vb 1 +\& objdump \-b oasys \-m vax \-h fu.o +.Ve +.Sp +displays summary information from the section headers (\fB\-h\fR) of +\&\fIfu.o\fR, which is explicitly identified (\fB\-m\fR) as a \s-1VAX\s0 object +file in the format produced by Oasys compilers. You can list the +formats available with the \fB\-i\fR option. +.IP "\fB\-C\fR" 4 +.IX Item "-C" +.PD 0 +.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4 +.IX Item "--demangle[=style]" +.PD +Decode (\fIdemangle\fR) low-level symbol names into user-level names. +Besides removing any initial underscore prepended by the system, this +makes \*(C+ function names readable. Different compilers have different +mangling styles. The optional demangling style argument can be used to +choose an appropriate demangling style for your compiler. +.IP "\fB\-g\fR" 4 +.IX Item "-g" +.PD 0 +.IP "\fB\-\-debugging\fR" 4 +.IX Item "--debugging" +.PD +Display debugging information. This attempts to parse \s-1STABS\s0 and \s-1IEEE\s0 +debugging format information stored in the file and print it out using +a C like syntax. If neither of these formats are found this option +falls back on the \fB\-W\fR option to print any \s-1DWARF\s0 information in +the file. +.IP "\fB\-e\fR" 4 +.IX Item "-e" +.PD 0 +.IP "\fB\-\-debugging\-tags\fR" 4 +.IX Item "--debugging-tags" +.PD +Like \fB\-g\fR, but the information is generated in a format compatible +with ctags tool. +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.PD 0 +.IP "\fB\-\-disassemble\fR" 4 +.IX Item "--disassemble" +.PD +Display the assembler mnemonics for the machine instructions from +\&\fIobjfile\fR. This option only disassembles those sections which are +expected to contain instructions. +.IP "\fB\-D\fR" 4 +.IX Item "-D" +.PD 0 +.IP "\fB\-\-disassemble\-all\fR" 4 +.IX Item "--disassemble-all" +.PD +Like \fB\-d\fR, but disassemble the contents of all sections, not just +those expected to contain instructions. +.Sp +If the target is an \s-1ARM\s0 architecture this switch also has the effect +of forcing the disassembler to decode pieces of data found in code +sections as if they were instructions. +.IP "\fB\-\-prefix\-addresses\fR" 4 +.IX Item "--prefix-addresses" +When disassembling, print the complete address on each line. This is +the older disassembly format. +.IP "\fB\-EB\fR" 4 +.IX Item "-EB" +.PD 0 +.IP "\fB\-EL\fR" 4 +.IX Item "-EL" +.IP "\fB\-\-endian={big|little}\fR" 4 +.IX Item "--endian={big|little}" +.PD +Specify the endianness of the object files. This only affects +disassembly. This can be useful when disassembling a file format which +does not describe endianness information, such as S\-records. +.IP "\fB\-f\fR" 4 +.IX Item "-f" +.PD 0 +.IP "\fB\-\-file\-headers\fR" 4 +.IX Item "--file-headers" +.PD +Display summary information from the overall header of +each of the \fIobjfile\fR files. +.IP "\fB\-F\fR" 4 +.IX Item "-F" +.PD 0 +.IP "\fB\-\-file\-offsets\fR" 4 +.IX Item "--file-offsets" +.PD +When disassembling sections, whenever a symbol is displayed, also +display the file offset of the region of data that is about to be +dumped. If zeroes are being skipped, then when disassembly resumes, +tell the user how many zeroes were skipped and the file offset of the +location from where the disassembly resumes. When dumping sections, +display the file offset of the location from where the dump starts. +.IP "\fB\-\-file\-start\-context\fR" 4 +.IX Item "--file-start-context" +Specify that when displaying interlisted source code/disassembly +(assumes \fB\-S\fR) from a file that has not yet been displayed, extend the +context to the start of the file. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-section\-headers\fR" 4 +.IX Item "--section-headers" +.IP "\fB\-\-headers\fR" 4 +.IX Item "--headers" +.PD +Display summary information from the section headers of the +object file. +.Sp +File segments may be relocated to nonstandard addresses, for example by +using the \fB\-Ttext\fR, \fB\-Tdata\fR, or \fB\-Tbss\fR options to +\&\fBld\fR. However, some object file formats, such as a.out, do not +store the starting address of the file segments. In those situations, +although \fBld\fR relocates the sections correctly, using \fBobjdump +\&\-h\fR to list the file section headers cannot show the correct addresses. +Instead, it shows the usual addresses, which are implicit for the +target. +.IP "\fB\-H\fR" 4 +.IX Item "-H" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Print a summary of the options to \fBobjdump\fR and exit. +.IP "\fB\-i\fR" 4 +.IX Item "-i" +.PD 0 +.IP "\fB\-\-info\fR" 4 +.IX Item "--info" +.PD +Display a list showing all architectures and object formats available +for specification with \fB\-b\fR or \fB\-m\fR. +.IP "\fB\-j\fR \fIname\fR" 4 +.IX Item "-j name" +.PD 0 +.IP "\fB\-\-section=\fR\fIname\fR" 4 +.IX Item "--section=name" +.PD +Display information only for section \fIname\fR. +.IP "\fB\-l\fR" 4 +.IX Item "-l" +.PD 0 +.IP "\fB\-\-line\-numbers\fR" 4 +.IX Item "--line-numbers" +.PD +Label the display (using debugging information) with the filename and +source line numbers corresponding to the object code or relocs shown. +Only useful with \fB\-d\fR, \fB\-D\fR, or \fB\-r\fR. +.IP "\fB\-m\fR \fImachine\fR" 4 +.IX Item "-m machine" +.PD 0 +.IP "\fB\-\-architecture=\fR\fImachine\fR" 4 +.IX Item "--architecture=machine" +.PD +Specify the architecture to use when disassembling object files. This +can be useful when disassembling object files which do not describe +architecture information, such as S\-records. You can list the available +architectures with the \fB\-i\fR option. +.Sp +If the target is an \s-1ARM\s0 architecture then this switch has an +additional effect. It restricts the disassembly to only those +instructions supported by the architecture specified by \fImachine\fR. +If it is necessary to use this switch because the input file does not +contain any architecture information, but it is also desired to +disassemble all the instructions use \fB\-marm\fR. +.IP "\fB\-M\fR \fIoptions\fR" 4 +.IX Item "-M options" +.PD 0 +.IP "\fB\-\-disassembler\-options=\fR\fIoptions\fR" 4 +.IX Item "--disassembler-options=options" +.PD +Pass target specific information to the disassembler. Only supported on +some targets. If it is necessary to specify more than one +disassembler option then multiple \fB\-M\fR options can be used or +can be placed together into a comma separated list. +.Sp +If the target is an \s-1ARM\s0 architecture then this switch can be used to +select which register name set is used during disassembler. Specifying +\&\fB\-M reg-names-std\fR (the default) will select the register names as +used in \s-1ARM\s0's instruction set documentation, but with register 13 called +\&'sp', register 14 called 'lr' and register 15 called 'pc'. Specifying +\&\fB\-M reg-names-apcs\fR will select the name set used by the \s-1ARM\s0 +Procedure Call Standard, whilst specifying \fB\-M reg-names-raw\fR will +just use \fBr\fR followed by the register number. +.Sp +There are also two variants on the \s-1APCS\s0 register naming scheme enabled +by \fB\-M reg-names-atpcs\fR and \fB\-M reg-names-special-atpcs\fR which +use the ARM/Thumb Procedure Call Standard naming conventions. (Either +with the normal register names or the special register names). +.Sp +This option can also be used for \s-1ARM\s0 architectures to force the +disassembler to interpret all instructions as Thumb instructions by +using the switch \fB\-\-disassembler\-options=force\-thumb\fR. This can be +useful when attempting to disassemble thumb code produced by other +compilers. +.Sp +For the x86, some of the options duplicate functions of the \fB\-m\fR +switch, but allow finer grained control. Multiple selections from the +following may be specified as a comma separated string. +\&\fBx86\-64\fR, \fBi386\fR and \fBi8086\fR select disassembly for +the given architecture. \fBintel\fR and \fBatt\fR select between +intel syntax mode and \s-1AT&T\s0 syntax mode. +\&\fBintel-mnemonic\fR and \fBatt-mnemonic\fR select between +intel mnemonic mode and \s-1AT&T\s0 mnemonic mode. \fBintel-mnemonic\fR +implies \fBintel\fR and \fBatt-mnemonic\fR implies \fBatt\fR. +\&\fBaddr64\fR, \fBaddr32\fR, +\&\fBaddr16\fR, \fBdata32\fR and \fBdata16\fR specify the default +address size and operand size. These four options will be overridden if +\&\fBx86\-64\fR, \fBi386\fR or \fBi8086\fR appear later in the +option string. Lastly, \fBsuffix\fR, when in \s-1AT&T\s0 mode, +instructs the disassembler to print a mnemonic suffix even when the +suffix could be inferred by the operands. +.Sp +For PowerPC, \fBbooke\fR controls the disassembly of BookE +instructions. \fB32\fR and \fB64\fR select PowerPC and +PowerPC64 disassembly, respectively. \fBe300\fR selects +disassembly for the e300 family. \fB440\fR selects disassembly for +the PowerPC 440. \fBppcps\fR selects disassembly for the paired +single instructions of the \s-1PPC750CL\s0. +.Sp +For \s-1MIPS\s0, this option controls the printing of instruction mnemonic +names and register names in disassembled instructions. Multiple +selections from the following may be specified as a comma separated +string, and invalid options are ignored: +.RS 4 +.ie n .IP """no\-aliases""" 4 +.el .IP "\f(CWno\-aliases\fR" 4 +.IX Item "no-aliases" +Print the 'raw' instruction mnemonic instead of some pseudo +instruction mnemonic. I.e., print 'daddu' or 'or' instead of 'move', +\&'sll' instead of 'nop', etc. +.ie n .IP """gpr\-names=\f(CIABI\f(CW""" 4 +.el .IP "\f(CWgpr\-names=\f(CIABI\f(CW\fR" 4 +.IX Item "gpr-names=ABI" +Print \s-1GPR\s0 (general-purpose register) names as appropriate +for the specified \s-1ABI\s0. By default, \s-1GPR\s0 names are selected according to +the \s-1ABI\s0 of the binary being disassembled. +.ie n .IP """fpr\-names=\f(CIABI\f(CW""" 4 +.el .IP "\f(CWfpr\-names=\f(CIABI\f(CW\fR" 4 +.IX Item "fpr-names=ABI" +Print \s-1FPR\s0 (floating-point register) names as +appropriate for the specified \s-1ABI\s0. By default, \s-1FPR\s0 numbers are printed +rather than names. +.ie n .IP """cp0\-names=\f(CIARCH\f(CW""" 4 +.el .IP "\f(CWcp0\-names=\f(CIARCH\f(CW\fR" 4 +.IX Item "cp0-names=ARCH" +Print \s-1CP0\s0 (system control coprocessor; coprocessor 0) register names +as appropriate for the \s-1CPU\s0 or architecture specified by +\&\fI\s-1ARCH\s0\fR. By default, \s-1CP0\s0 register names are selected according to +the architecture and \s-1CPU\s0 of the binary being disassembled. +.ie n .IP """hwr\-names=\f(CIARCH\f(CW""" 4 +.el .IP "\f(CWhwr\-names=\f(CIARCH\f(CW\fR" 4 +.IX Item "hwr-names=ARCH" +Print \s-1HWR\s0 (hardware register, used by the \f(CW\*(C`rdhwr\*(C'\fR instruction) names +as appropriate for the \s-1CPU\s0 or architecture specified by +\&\fI\s-1ARCH\s0\fR. By default, \s-1HWR\s0 names are selected according to +the architecture and \s-1CPU\s0 of the binary being disassembled. +.ie n .IP """reg\-names=\f(CIABI\f(CW""" 4 +.el .IP "\f(CWreg\-names=\f(CIABI\f(CW\fR" 4 +.IX Item "reg-names=ABI" +Print \s-1GPR\s0 and \s-1FPR\s0 names as appropriate for the selected \s-1ABI\s0. +.ie n .IP """reg\-names=\f(CIARCH\f(CW""" 4 +.el .IP "\f(CWreg\-names=\f(CIARCH\f(CW\fR" 4 +.IX Item "reg-names=ARCH" +Print CPU-specific register names (\s-1CP0\s0 register and \s-1HWR\s0 names) +as appropriate for the selected \s-1CPU\s0 or architecture. +.RE +.RS 4 +.Sp +For any of the options listed above, \fI\s-1ABI\s0\fR or +\&\fI\s-1ARCH\s0\fR may be specified as \fBnumeric\fR to have numbers printed +rather than names, for the selected types of registers. +You can list the available values of \fI\s-1ABI\s0\fR and \fI\s-1ARCH\s0\fR using +the \fB\-\-help\fR option. +.Sp +For \s-1VAX\s0, you can specify function entry addresses with \fB\-M +entry:0xf00ba\fR. You can use this multiple times to properly +disassemble \s-1VAX\s0 binary files that don't contain symbol tables (like +\&\s-1ROM\s0 dumps). In these cases, the function entry mask would otherwise +be decoded as \s-1VAX\s0 instructions, which would probably lead the rest +of the function being wrongly disassembled. +.RE +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-private\-headers\fR" 4 +.IX Item "--private-headers" +.PD +Print information that is specific to the object file format. The exact +information printed depends upon the object file format. For some +object file formats, no additional information is printed. +.IP "\fB\-r\fR" 4 +.IX Item "-r" +.PD 0 +.IP "\fB\-\-reloc\fR" 4 +.IX Item "--reloc" +.PD +Print the relocation entries of the file. If used with \fB\-d\fR or +\&\fB\-D\fR, the relocations are printed interspersed with the +disassembly. +.IP "\fB\-R\fR" 4 +.IX Item "-R" +.PD 0 +.IP "\fB\-\-dynamic\-reloc\fR" 4 +.IX Item "--dynamic-reloc" +.PD +Print the dynamic relocation entries of the file. This is only +meaningful for dynamic objects, such as certain types of shared +libraries. As for \fB\-r\fR, if used with \fB\-d\fR or +\&\fB\-D\fR, the relocations are printed interspersed with the +disassembly. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-full\-contents\fR" 4 +.IX Item "--full-contents" +.PD +Display the full contents of any sections requested. By default all +non-empty sections are displayed. +.IP "\fB\-S\fR" 4 +.IX Item "-S" +.PD 0 +.IP "\fB\-\-source\fR" 4 +.IX Item "--source" +.PD +Display source code intermixed with disassembly, if possible. Implies +\&\fB\-d\fR. +.IP "\fB\-\-prefix=\fR\fIprefix\fR" 4 +.IX Item "--prefix=prefix" +Specify \fIprefix\fR to add to the absolute paths when used with +\&\fB\-S\fR. +.IP "\fB\-\-prefix\-strip=\fR\fIlevel\fR" 4 +.IX Item "--prefix-strip=level" +Indicate how many initial directory names to strip off the hardwired +absolute paths. It has no effect without \fB\-\-prefix=\fR\fIprefix\fR. +.IP "\fB\-\-show\-raw\-insn\fR" 4 +.IX Item "--show-raw-insn" +When disassembling instructions, print the instruction in hex as well as +in symbolic form. This is the default except when +\&\fB\-\-prefix\-addresses\fR is used. +.IP "\fB\-\-no\-show\-raw\-insn\fR" 4 +.IX Item "--no-show-raw-insn" +When disassembling instructions, do not print the instruction bytes. +This is the default when \fB\-\-prefix\-addresses\fR is used. +.IP "\fB\-\-insn\-width=\fR\fIwidth\fR" 4 +.IX Item "--insn-width=width" +Display \fIwidth\fR bytes on a single line when disassembling +instructions. +.IP "\fB\-W[lLiaprmfFsoR]\fR" 4 +.IX Item "-W[lLiaprmfFsoR]" +.PD 0 +.IP "\fB\-\-dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]\fR" 4 +.IX Item "--dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]" +.PD +Displays the contents of the debug sections in the file, if any are +present. If one of the optional letters or words follows the switch +then only data found in those specific sections will be dumped. +.IP "\fB\-G\fR" 4 +.IX Item "-G" +.PD 0 +.IP "\fB\-\-stabs\fR" 4 +.IX Item "--stabs" +.PD +Display the full contents of any sections requested. Display the +contents of the .stab and .stab.index and .stab.excl sections from an +\&\s-1ELF\s0 file. This is only useful on systems (such as Solaris 2.0) in which +\&\f(CW\*(C`.stab\*(C'\fR debugging symbol-table entries are carried in an \s-1ELF\s0 +section. In most other file formats, debugging symbol-table entries are +interleaved with linkage symbols, and are visible in the \fB\-\-syms\fR +output. +.IP "\fB\-\-start\-address=\fR\fIaddress\fR" 4 +.IX Item "--start-address=address" +Start displaying data at the specified address. This affects the output +of the \fB\-d\fR, \fB\-r\fR and \fB\-s\fR options. +.IP "\fB\-\-stop\-address=\fR\fIaddress\fR" 4 +.IX Item "--stop-address=address" +Stop displaying data at the specified address. This affects the output +of the \fB\-d\fR, \fB\-r\fR and \fB\-s\fR options. +.IP "\fB\-t\fR" 4 +.IX Item "-t" +.PD 0 +.IP "\fB\-\-syms\fR" 4 +.IX Item "--syms" +.PD +Print the symbol table entries of the file. +This is similar to the information provided by the \fBnm\fR program, +although the display format is different. The format of the output +depends upon the format of the file being dumped, but there are two main +types. One looks like this: +.Sp +.Vb 2 +\& [ 4](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss +\& [ 6](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x00000000 fred +.Ve +.Sp +where the number inside the square brackets is the number of the entry +in the symbol table, the \fIsec\fR number is the section number, the +\&\fIfl\fR value are the symbol's flag bits, the \fIty\fR number is the +symbol's type, the \fIscl\fR number is the symbol's storage class and +the \fInx\fR value is the number of auxilary entries associated with +the symbol. The last two fields are the symbol's value and its name. +.Sp +The other common output format, usually seen with \s-1ELF\s0 based files, +looks like this: +.Sp +.Vb 2 +\& 00000000 l d .bss 00000000 .bss +\& 00000000 g .text 00000000 fred +.Ve +.Sp +Here the first number is the symbol's value (sometimes refered to as +its address). The next field is actually a set of characters and +spaces indicating the flag bits that are set on the symbol. These +characters are described below. Next is the section with which the +symbol is associated or \fI*ABS*\fR if the section is absolute (ie +not connected with any section), or \fI*UND*\fR if the section is +referenced in the file being dumped, but not defined there. +.Sp +After the section name comes another field, a number, which for common +symbols is the alignment and for other symbol is the size. Finally +the symbol's name is displayed. +.Sp +The flag characters are divided into 7 groups as follows: +.RS 4 +.ie n .IP """l""" 4 +.el .IP "\f(CWl\fR" 4 +.IX Item "l" +.PD 0 +.ie n .IP """g""" 4 +.el .IP "\f(CWg\fR" 4 +.IX Item "g" +.ie n .IP """u""" 4 +.el .IP "\f(CWu\fR" 4 +.IX Item "u" +.ie n .IP """!""" 4 +.el .IP "\f(CW!\fR" 4 +.IX Item "!" +.PD +The symbol is a local (l), global (g), unique global (u), neither +global nor local (a space) or both global and local (!). A +symbol can be neither local or global for a variety of reasons, e.g., +because it is used for debugging, but it is probably an indication of +a bug if it is ever both local and global. Unique global symbols are +a \s-1GNU\s0 extension to the standard set of \s-1ELF\s0 symbol bindings. For such +a symbol the dynamic linker will make sure that in the entire process +there is just one symbol with this name and type in use. +.ie n .IP """w""" 4 +.el .IP "\f(CWw\fR" 4 +.IX Item "w" +The symbol is weak (w) or strong (a space). +.ie n .IP """C""" 4 +.el .IP "\f(CWC\fR" 4 +.IX Item "C" +The symbol denotes a constructor (C) or an ordinary symbol (a space). +.ie n .IP """W""" 4 +.el .IP "\f(CWW\fR" 4 +.IX Item "W" +The symbol is a warning (W) or a normal symbol (a space). A warning +symbol's name is a message to be displayed if the symbol following the +warning symbol is ever referenced. +.ie n .IP """I""" 4 +.el .IP "\f(CWI\fR" 4 +.IX Item "I" +.PD 0 +.ie n .IP """i""" 4 +.el .IP "\f(CWi\fR" 4 +.IX Item "i" +.PD +The symbol is an indirect reference to another symbol (I), a function +to be evaluated during reloc processing (i) or a normal symbol (a +space). +.ie n .IP """d""" 4 +.el .IP "\f(CWd\fR" 4 +.IX Item "d" +.PD 0 +.ie n .IP """D""" 4 +.el .IP "\f(CWD\fR" 4 +.IX Item "D" +.PD +The symbol is a debugging symbol (d) or a dynamic symbol (D) or a +normal symbol (a space). +.ie n .IP """F""" 4 +.el .IP "\f(CWF\fR" 4 +.IX Item "F" +.PD 0 +.ie n .IP """f""" 4 +.el .IP "\f(CWf\fR" 4 +.IX Item "f" +.ie n .IP """O""" 4 +.el .IP "\f(CWO\fR" 4 +.IX Item "O" +.PD +The symbol is the name of a function (F) or a file (f) or an object +(O) or just a normal symbol (a space). +.RE +.RS 4 +.RE +.IP "\fB\-T\fR" 4 +.IX Item "-T" +.PD 0 +.IP "\fB\-\-dynamic\-syms\fR" 4 +.IX Item "--dynamic-syms" +.PD +Print the dynamic symbol table entries of the file. This is only +meaningful for dynamic objects, such as certain types of shared +libraries. This is similar to the information provided by the \fBnm\fR +program when given the \fB\-D\fR (\fB\-\-dynamic\fR) option. +.IP "\fB\-\-special\-syms\fR" 4 +.IX Item "--special-syms" +When displaying symbols include those which the target considers to be +special in some way and which would not normally be of interest to the +user. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Print the version number of \fBobjdump\fR and exit. +.IP "\fB\-x\fR" 4 +.IX Item "-x" +.PD 0 +.IP "\fB\-\-all\-headers\fR" 4 +.IX Item "--all-headers" +.PD +Display all available header information, including the symbol table and +relocation entries. Using \fB\-x\fR is equivalent to specifying all of +\&\fB\-a \-f \-h \-p \-r \-t\fR. +.IP "\fB\-w\fR" 4 +.IX Item "-w" +.PD 0 +.IP "\fB\-\-wide\fR" 4 +.IX Item "--wide" +.PD +Format some lines for output devices that have more than 80 columns. +Also do not truncate symbol names when they are displayed. +.IP "\fB\-z\fR" 4 +.IX Item "-z" +.PD 0 +.IP "\fB\-\-disassemble\-zeroes\fR" 4 +.IX Item "--disassemble-zeroes" +.PD +Normally the disassembly output will skip blocks of zeroes. This +option directs the disassembler to disassemble those blocks, just like +any other data. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fInm\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/ranlib.1 b/binutils/doc/ranlib.1 new file mode 100644 index 0000000..a72019c --- /dev/null +++ b/binutils/doc/ranlib.1 @@ -0,0 +1,199 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "RANLIB 1" +.TH RANLIB 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +ranlib \- generate index to archive. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +ranlib [\fB\-vVt\fR] \fIarchive\fR +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBranlib\fR generates an index to the contents of an archive and +stores it in the archive. The index lists each symbol defined by a +member of an archive that is a relocatable object file. +.PP +You may use \fBnm \-s\fR or \fBnm \-\-print\-armap\fR to list this index. +.PP +An archive with such an index speeds up linking to the library and +allows routines in the library to call each other without regard to +their placement in the archive. +.PP +The \s-1GNU\s0 \fBranlib\fR program is another form of \s-1GNU\s0 \fBar\fR; running +\&\fBranlib\fR is completely equivalent to executing \fBar \-s\fR. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Show the version number of \fBranlib\fR. +.IP "\fB\-t\fR" 4 +.IX Item "-t" +Update the timestamp of the symbol map of an archive. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIar\fR\|(1), \fInm\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/readelf.1 b/binutils/doc/readelf.1 new file mode 100644 index 0000000..07132ee --- /dev/null +++ b/binutils/doc/readelf.1 @@ -0,0 +1,420 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "READELF 1" +.TH READELF 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +readelf \- Displays information about ELF files. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +readelf [\fB\-a\fR|\fB\-\-all\fR] + [\fB\-h\fR|\fB\-\-file\-header\fR] + [\fB\-l\fR|\fB\-\-program\-headers\fR|\fB\-\-segments\fR] + [\fB\-S\fR|\fB\-\-section\-headers\fR|\fB\-\-sections\fR] + [\fB\-g\fR|\fB\-\-section\-groups\fR] + [\fB\-t\fR|\fB\-\-section\-details\fR] + [\fB\-e\fR|\fB\-\-headers\fR] + [\fB\-s\fR|\fB\-\-syms\fR|\fB\-\-symbols\fR] + [\fB\-n\fR|\fB\-\-notes\fR] + [\fB\-r\fR|\fB\-\-relocs\fR] + [\fB\-u\fR|\fB\-\-unwind\fR] + [\fB\-d\fR|\fB\-\-dynamic\fR] + [\fB\-V\fR|\fB\-\-version\-info\fR] + [\fB\-A\fR|\fB\-\-arch\-specific\fR] + [\fB\-D\fR|\fB\-\-use\-dynamic\fR] + [\fB\-x\fR <number or name>|\fB\-\-hex\-dump=\fR<number or name>] + [\fB\-p\fR <number or name>|\fB\-\-string\-dump=\fR<number or name>] + [\fB\-R\fR <number or name>|\fB\-\-relocated\-dump=\fR<number or name>] + [\fB\-c\fR|\fB\-\-archive\-index\fR] + [\fB\-w[lLiaprmfFsoR]\fR| + \fB\-\-debug\-dump\fR[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]] + [\fB\-I\fR|\fB\-histogram\fR] + [\fB\-v\fR|\fB\-\-version\fR] + [\fB\-W\fR|\fB\-\-wide\fR] + [\fB\-H\fR|\fB\-\-help\fR] + \fIelffile\fR... +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBreadelf\fR displays information about one or more \s-1ELF\s0 format object +files. The options control what particular information to display. +.PP +\&\fIelffile\fR... are the object files to be examined. 32\-bit and +64\-bit \s-1ELF\s0 files are supported, as are archives containing \s-1ELF\s0 files. +.PP +This program performs a similar function to \fBobjdump\fR but it +goes into more detail and it exists independently of the \s-1BFD\s0 +library, so if there is a bug in \s-1BFD\s0 then readelf will not be +affected. +.SH "OPTIONS" +.IX Header "OPTIONS" +The long and short forms of options, shown here as alternatives, are +equivalent. At least one option besides \fB\-v\fR or \fB\-H\fR must be +given. +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-all\fR" 4 +.IX Item "--all" +.PD +Equivalent to specifying \fB\-\-file\-header\fR, +\&\fB\-\-program\-headers\fR, \fB\-\-sections\fR, \fB\-\-symbols\fR, +\&\fB\-\-relocs\fR, \fB\-\-dynamic\fR, \fB\-\-notes\fR and +\&\fB\-\-version\-info\fR. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-file\-header\fR" 4 +.IX Item "--file-header" +.PD +Displays the information contained in the \s-1ELF\s0 header at the start of the +file. +.IP "\fB\-l\fR" 4 +.IX Item "-l" +.PD 0 +.IP "\fB\-\-program\-headers\fR" 4 +.IX Item "--program-headers" +.IP "\fB\-\-segments\fR" 4 +.IX Item "--segments" +.PD +Displays the information contained in the file's segment headers, if it +has any. +.IP "\fB\-S\fR" 4 +.IX Item "-S" +.PD 0 +.IP "\fB\-\-sections\fR" 4 +.IX Item "--sections" +.IP "\fB\-\-section\-headers\fR" 4 +.IX Item "--section-headers" +.PD +Displays the information contained in the file's section headers, if it +has any. +.IP "\fB\-g\fR" 4 +.IX Item "-g" +.PD 0 +.IP "\fB\-\-section\-groups\fR" 4 +.IX Item "--section-groups" +.PD +Displays the information contained in the file's section groups, if it +has any. +.IP "\fB\-t\fR" 4 +.IX Item "-t" +.PD 0 +.IP "\fB\-\-section\-details\fR" 4 +.IX Item "--section-details" +.PD +Displays the detailed section information. Implies \fB\-S\fR. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-symbols\fR" 4 +.IX Item "--symbols" +.IP "\fB\-\-syms\fR" 4 +.IX Item "--syms" +.PD +Displays the entries in symbol table section of the file, if it has one. +.IP "\fB\-e\fR" 4 +.IX Item "-e" +.PD 0 +.IP "\fB\-\-headers\fR" 4 +.IX Item "--headers" +.PD +Display all the headers in the file. Equivalent to \fB\-h \-l \-S\fR. +.IP "\fB\-n\fR" 4 +.IX Item "-n" +.PD 0 +.IP "\fB\-\-notes\fR" 4 +.IX Item "--notes" +.PD +Displays the contents of the \s-1NOTE\s0 segments and/or sections, if any. +.IP "\fB\-r\fR" 4 +.IX Item "-r" +.PD 0 +.IP "\fB\-\-relocs\fR" 4 +.IX Item "--relocs" +.PD +Displays the contents of the file's relocation section, if it has one. +.IP "\fB\-u\fR" 4 +.IX Item "-u" +.PD 0 +.IP "\fB\-\-unwind\fR" 4 +.IX Item "--unwind" +.PD +Displays the contents of the file's unwind section, if it has one. Only +the unwind sections for \s-1IA64\s0 \s-1ELF\s0 files are currently supported. +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.PD 0 +.IP "\fB\-\-dynamic\fR" 4 +.IX Item "--dynamic" +.PD +Displays the contents of the file's dynamic section, if it has one. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\-info\fR" 4 +.IX Item "--version-info" +.PD +Displays the contents of the version sections in the file, it they +exist. +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-\-arch\-specific\fR" 4 +.IX Item "--arch-specific" +.PD +Displays architecture-specific information in the file, if there +is any. +.IP "\fB\-D\fR" 4 +.IX Item "-D" +.PD 0 +.IP "\fB\-\-use\-dynamic\fR" 4 +.IX Item "--use-dynamic" +.PD +When displaying symbols, this option makes \fBreadelf\fR use the +symbol table in the file's dynamic section, rather than the one in the +symbols section. +.IP "\fB\-x <number or name>\fR" 4 +.IX Item "-x <number or name>" +.PD 0 +.IP "\fB\-\-hex\-dump=<number or name>\fR" 4 +.IX Item "--hex-dump=<number or name>" +.PD +Displays the contents of the indicated section as a hexadecimal bytes. +A number identifies a particular section by index in the section table; +any other string identifies all sections with that name in the object file. +.IP "\fB\-R <number or name>\fR" 4 +.IX Item "-R <number or name>" +.PD 0 +.IP "\fB\-\-relocated\-dump=<number or name>\fR" 4 +.IX Item "--relocated-dump=<number or name>" +.PD +Displays the contents of the indicated section as a hexadecimal +bytes. A number identifies a particular section by index in the +section table; any other string identifies all sections with that name +in the object file. The contents of the section will be relocated +before they are displayed. +.IP "\fB\-p <number or name>\fR" 4 +.IX Item "-p <number or name>" +.PD 0 +.IP "\fB\-\-string\-dump=<number or name>\fR" 4 +.IX Item "--string-dump=<number or name>" +.PD +Displays the contents of the indicated section as printable strings. +A number identifies a particular section by index in the section table; +any other string identifies all sections with that name in the object file. +.IP "\fB\-c\fR" 4 +.IX Item "-c" +.PD 0 +.IP "\fB\-\-archive\-index\fR" 4 +.IX Item "--archive-index" +.PD +Displays the file symbol index infomation contained in the header part +of binary archives. Performs the same function as the \fBt\fR +command to \fBar\fR, but without using the \s-1BFD\s0 library. +.IP "\fB\-w[lLiaprmfFsoR]\fR" 4 +.IX Item "-w[lLiaprmfFsoR]" +.PD 0 +.IP "\fB\-\-debug\-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]\fR" 4 +.IX Item "--debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]" +.PD +Displays the contents of the debug sections in the file, if any are +present. If one of the optional letters or words follows the switch +then only data found in those specific sections will be dumped. +.Sp +Note: the \fB=decodedline\fR option will display the interpreted +contents of a .debug_line section whereas the \fB=rawline\fR option +dumps the contents in a raw format. +.IP "\fB\-I\fR" 4 +.IX Item "-I" +.PD 0 +.IP "\fB\-\-histogram\fR" 4 +.IX Item "--histogram" +.PD +Display a histogram of bucket list lengths when displaying the contents +of the symbol tables. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Display the version number of readelf. +.IP "\fB\-W\fR" 4 +.IX Item "-W" +.PD 0 +.IP "\fB\-\-wide\fR" 4 +.IX Item "--wide" +.PD +Don't break output lines to fit into 80 columns. By default +\&\fBreadelf\fR breaks section header and segment listing lines for +64\-bit \s-1ELF\s0 files, so that they fit into 80 columns. This option causes +\&\fBreadelf\fR to print each section header resp. each segment one a +single line, which is far more readable on terminals wider than 80 columns. +.IP "\fB\-H\fR" 4 +.IX Item "-H" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Display the command line options understood by \fBreadelf\fR. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/size.1 b/binutils/doc/size.1 new file mode 100644 index 0000000..a76bebe --- /dev/null +++ b/binutils/doc/size.1 @@ -0,0 +1,275 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "SIZE 1" +.TH SIZE 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +size \- list section sizes and total size. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +size [\fB\-A\fR|\fB\-B\fR|\fB\-\-format=\fR\fIcompatibility\fR] + [\fB\-\-help\fR] + [\fB\-d\fR|\fB\-o\fR|\fB\-x\fR|\fB\-\-radix=\fR\fInumber\fR] + [\fB\-\-common\fR] + [\fB\-t\fR|\fB\-\-totals\fR] + [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-V\fR|\fB\-\-version\fR] + [\fIobjfile\fR...] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +The \s-1GNU\s0 \fBsize\fR utility lists the section sizes\-\-\-and the total +size\-\-\-for each of the object or archive files \fIobjfile\fR in its +argument list. By default, one line of output is generated for each +object file or each module in an archive. +.PP +\&\fIobjfile\fR... are the object files to be examined. +If none are specified, the file \f(CW\*(C`a.out\*(C'\fR will be used. +.SH "OPTIONS" +.IX Header "OPTIONS" +The command line options have the following meanings: +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-B\fR" 4 +.IX Item "-B" +.IP "\fB\-\-format=\fR\fIcompatibility\fR" 4 +.IX Item "--format=compatibility" +.PD +Using one of these options, you can choose whether the output from \s-1GNU\s0 +\&\fBsize\fR resembles output from System V \fBsize\fR (using \fB\-A\fR, +or \fB\-\-format=sysv\fR), or Berkeley \fBsize\fR (using \fB\-B\fR, or +\&\fB\-\-format=berkeley\fR). The default is the one-line format similar to +Berkeley's. +.Sp +Here is an example of the Berkeley (default) format of output from +\&\fBsize\fR: +.Sp +.Vb 4 +\& $ size \-\-format=Berkeley ranlib size +\& text data bss dec hex filename +\& 294880 81920 11592 388392 5ed28 ranlib +\& 294880 81920 11888 388688 5ee50 size +.Ve +.Sp +This is the same data, but displayed closer to System V conventions: +.Sp +.Vb 7 +\& $ size \-\-format=SysV ranlib size +\& ranlib : +\& section size addr +\& .text 294880 8192 +\& .data 81920 303104 +\& .bss 11592 385024 +\& Total 388392 +\& +\& +\& size : +\& section size addr +\& .text 294880 8192 +\& .data 81920 303104 +\& .bss 11888 385024 +\& Total 388688 +.Ve +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Show a summary of acceptable arguments and options. +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.PD 0 +.IP "\fB\-o\fR" 4 +.IX Item "-o" +.IP "\fB\-x\fR" 4 +.IX Item "-x" +.IP "\fB\-\-radix=\fR\fInumber\fR" 4 +.IX Item "--radix=number" +.PD +Using one of these options, you can control whether the size of each +section is given in decimal (\fB\-d\fR, or \fB\-\-radix=10\fR); octal +(\fB\-o\fR, or \fB\-\-radix=8\fR); or hexadecimal (\fB\-x\fR, or +\&\fB\-\-radix=16\fR). In \fB\-\-radix=\fR\fInumber\fR, only the three +values (8, 10, 16) are supported. The total size is always given in two +radices; decimal and hexadecimal for \fB\-d\fR or \fB\-x\fR output, or +octal and hexadecimal if you're using \fB\-o\fR. +.IP "\fB\-\-common\fR" 4 +.IX Item "--common" +Print total size of common symbols in each file. When using Berkeley +format these are included in the bss size. +.IP "\fB\-t\fR" 4 +.IX Item "-t" +.PD 0 +.IP "\fB\-\-totals\fR" 4 +.IX Item "--totals" +.PD +Show totals of all objects listed (Berkeley format listing mode only). +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +Specify that the object-code format for \fIobjfile\fR is +\&\fIbfdname\fR. This option may not be necessary; \fBsize\fR can +automatically recognize many formats. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Display the version number of \fBsize\fR. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/strings.1 b/binutils/doc/strings.1 new file mode 100644 index 0000000..0904a40 --- /dev/null +++ b/binutils/doc/strings.1 @@ -0,0 +1,264 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "STRINGS 1" +.TH STRINGS 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +strings \- print the strings of printable characters in files. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +strings [\fB\-afovV\fR] [\fB\-\fR\fImin-len\fR] + [\fB\-n\fR \fImin-len\fR] [\fB\-\-bytes=\fR\fImin-len\fR] + [\fB\-t\fR \fIradix\fR] [\fB\-\-radix=\fR\fIradix\fR] + [\fB\-e\fR \fIencoding\fR] [\fB\-\-encoding=\fR\fIencoding\fR] + [\fB\-\fR] [\fB\-\-all\fR] [\fB\-\-print\-file\-name\fR] + [\fB\-T\fR \fIbfdname\fR] [\fB\-\-target=\fR\fIbfdname\fR] + [\fB\-\-help\fR] [\fB\-\-version\fR] \fIfile\fR... +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +For each \fIfile\fR given, \s-1GNU\s0 \fBstrings\fR prints the printable +character sequences that are at least 4 characters long (or the number +given with the options below) and are followed by an unprintable +character. By default, it only prints the strings from the initialized +and loaded sections of object files; for other types of files, it prints +the strings from the whole file. +.PP +\&\fBstrings\fR is mainly useful for determining the contents of non-text +files. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-all\fR" 4 +.IX Item "--all" +.IP "\fB\-\fR" 4 +.IX Item "-" +.PD +Do not scan only the initialized and loaded sections of object files; +scan the whole files. +.IP "\fB\-f\fR" 4 +.IX Item "-f" +.PD 0 +.IP "\fB\-\-print\-file\-name\fR" 4 +.IX Item "--print-file-name" +.PD +Print the name of the file before each string. +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Print a summary of the program usage on the standard output and exit. +.IP "\fB\-\fR\fImin-len\fR" 4 +.IX Item "-min-len" +.PD 0 +.IP "\fB\-n\fR \fImin-len\fR" 4 +.IX Item "-n min-len" +.IP "\fB\-\-bytes=\fR\fImin-len\fR" 4 +.IX Item "--bytes=min-len" +.PD +Print sequences of characters that are at least \fImin-len\fR characters +long, instead of the default 4. +.IP "\fB\-o\fR" 4 +.IX Item "-o" +Like \fB\-t o\fR. Some other versions of \fBstrings\fR have \fB\-o\fR +act like \fB\-t d\fR instead. Since we can not be compatible with both +ways, we simply chose one. +.IP "\fB\-t\fR \fIradix\fR" 4 +.IX Item "-t radix" +.PD 0 +.IP "\fB\-\-radix=\fR\fIradix\fR" 4 +.IX Item "--radix=radix" +.PD +Print the offset within the file before each string. The single +character argument specifies the radix of the offset\-\-\-\fBo\fR for +octal, \fBx\fR for hexadecimal, or \fBd\fR for decimal. +.IP "\fB\-e\fR \fIencoding\fR" 4 +.IX Item "-e encoding" +.PD 0 +.IP "\fB\-\-encoding=\fR\fIencoding\fR" 4 +.IX Item "--encoding=encoding" +.PD +Select the character encoding of the strings that are to be found. +Possible values for \fIencoding\fR are: \fBs\fR = single\-7\-bit\-byte +characters (\s-1ASCII\s0, \s-1ISO\s0 8859, etc., default), \fBS\fR = +single\-8\-bit\-byte characters, \fBb\fR = 16\-bit bigendian, \fBl\fR = +16\-bit littleendian, \fBB\fR = 32\-bit bigendian, \fBL\fR = 32\-bit +littleendian. Useful for finding wide character strings. (\fBl\fR +and \fBb\fR apply to, for example, Unicode \s-1UTF\-16/UCS\-2\s0 encodings). +.IP "\fB\-T\fR \fIbfdname\fR" 4 +.IX Item "-T bfdname" +.PD 0 +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +.PD +Specify an object code format other than your system's default format. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Print the program version number on the standard output and exit. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +\&\fIar\fR\|(1), \fInm\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), \fIreadelf\fR\|(1) +and the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/strip.1 b/binutils/doc/strip.1 new file mode 100644 index 0000000..fba09c4 --- /dev/null +++ b/binutils/doc/strip.1 @@ -0,0 +1,399 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "STRIP 1" +.TH STRIP 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +strip \- Discard symbols from object files. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +strip [\fB\-F\fR \fIbfdname\fR |\fB\-\-target=\fR\fIbfdname\fR] + [\fB\-I\fR \fIbfdname\fR |\fB\-\-input\-target=\fR\fIbfdname\fR] + [\fB\-O\fR \fIbfdname\fR |\fB\-\-output\-target=\fR\fIbfdname\fR] + [\fB\-s\fR|\fB\-\-strip\-all\fR] + [\fB\-S\fR|\fB\-g\fR|\fB\-d\fR|\fB\-\-strip\-debug\fR] + [\fB\-K\fR \fIsymbolname\fR |\fB\-\-keep\-symbol=\fR\fIsymbolname\fR] + [\fB\-N\fR \fIsymbolname\fR |\fB\-\-strip\-symbol=\fR\fIsymbolname\fR] + [\fB\-w\fR|\fB\-\-wildcard\fR] + [\fB\-x\fR|\fB\-\-discard\-all\fR] [\fB\-X\fR |\fB\-\-discard\-locals\fR] + [\fB\-R\fR \fIsectionname\fR |\fB\-\-remove\-section=\fR\fIsectionname\fR] + [\fB\-o\fR \fIfile\fR] [\fB\-p\fR|\fB\-\-preserve\-dates\fR] + [\fB\-\-keep\-file\-symbols\fR] + [\fB\-\-only\-keep\-debug\fR] + [\fB\-v\fR |\fB\-\-verbose\fR] [\fB\-V\fR|\fB\-\-version\fR] + [\fB\-\-help\fR] [\fB\-\-info\fR] + \fIobjfile\fR... +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\s-1GNU\s0 \fBstrip\fR discards all symbols from object files +\&\fIobjfile\fR. The list of object files may include archives. +At least one object file must be given. +.PP +\&\fBstrip\fR modifies the files named in its argument, +rather than writing modified copies under different names. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-F\fR \fIbfdname\fR" 4 +.IX Item "-F bfdname" +.PD 0 +.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 +.IX Item "--target=bfdname" +.PD +Treat the original \fIobjfile\fR as a file with the object +code format \fIbfdname\fR, and rewrite it in the same format. +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +Show a summary of the options to \fBstrip\fR and exit. +.IP "\fB\-\-info\fR" 4 +.IX Item "--info" +Display a list showing all architectures and object formats available. +.IP "\fB\-I\fR \fIbfdname\fR" 4 +.IX Item "-I bfdname" +.PD 0 +.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4 +.IX Item "--input-target=bfdname" +.PD +Treat the original \fIobjfile\fR as a file with the object +code format \fIbfdname\fR. +.IP "\fB\-O\fR \fIbfdname\fR" 4 +.IX Item "-O bfdname" +.PD 0 +.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4 +.IX Item "--output-target=bfdname" +.PD +Replace \fIobjfile\fR with a file in the output format \fIbfdname\fR. +.IP "\fB\-R\fR \fIsectionname\fR" 4 +.IX Item "-R sectionname" +.PD 0 +.IP "\fB\-\-remove\-section=\fR\fIsectionname\fR" 4 +.IX Item "--remove-section=sectionname" +.PD +Remove any section named \fIsectionname\fR from the output file. This +option may be given more than once. Note that using this option +inappropriately may make the output file unusable. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-strip\-all\fR" 4 +.IX Item "--strip-all" +.PD +Remove all symbols. +.IP "\fB\-g\fR" 4 +.IX Item "-g" +.PD 0 +.IP "\fB\-S\fR" 4 +.IX Item "-S" +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.IP "\fB\-\-strip\-debug\fR" 4 +.IX Item "--strip-debug" +.PD +Remove debugging symbols only. +.IP "\fB\-\-strip\-unneeded\fR" 4 +.IX Item "--strip-unneeded" +Remove all symbols that are not needed for relocation processing. +.IP "\fB\-K\fR \fIsymbolname\fR" 4 +.IX Item "-K symbolname" +.PD 0 +.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--keep-symbol=symbolname" +.PD +When stripping symbols, keep symbol \fIsymbolname\fR even if it would +normally be stripped. This option may be given more than once. +.IP "\fB\-N\fR \fIsymbolname\fR" 4 +.IX Item "-N symbolname" +.PD 0 +.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4 +.IX Item "--strip-symbol=symbolname" +.PD +Remove symbol \fIsymbolname\fR from the source file. This option may be +given more than once, and may be combined with strip options other than +\&\fB\-K\fR. +.IP "\fB\-o\fR \fIfile\fR" 4 +.IX Item "-o file" +Put the stripped output in \fIfile\fR, rather than replacing the +existing file. When this argument is used, only one \fIobjfile\fR +argument may be specified. +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-preserve\-dates\fR" 4 +.IX Item "--preserve-dates" +.PD +Preserve the access and modification dates of the file. +.IP "\fB\-w\fR" 4 +.IX Item "-w" +.PD 0 +.IP "\fB\-\-wildcard\fR" 4 +.IX Item "--wildcard" +.PD +Permit regular expressions in \fIsymbolname\fRs used in other command +line options. The question mark (?), asterisk (*), backslash (\e) and +square brackets ([]) operators can be used anywhere in the symbol +name. If the first character of the symbol name is the exclamation +point (!) then the sense of the switch is reversed for that symbol. +For example: +.Sp +.Vb 1 +\& \-w \-K !foo \-K fo* +.Ve +.Sp +would cause strip to only keep symbols that start with the letters +\&\*(L"fo\*(R", but to discard the symbol \*(L"foo\*(R". +.IP "\fB\-x\fR" 4 +.IX Item "-x" +.PD 0 +.IP "\fB\-\-discard\-all\fR" 4 +.IX Item "--discard-all" +.PD +Remove non-global symbols. +.IP "\fB\-X\fR" 4 +.IX Item "-X" +.PD 0 +.IP "\fB\-\-discard\-locals\fR" 4 +.IX Item "--discard-locals" +.PD +Remove compiler-generated local symbols. +(These usually start with \fBL\fR or \fB.\fR.) +.IP "\fB\-\-keep\-file\-symbols\fR" 4 +.IX Item "--keep-file-symbols" +When stripping a file, perhaps with \fB\-\-strip\-debug\fR or +\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names, +which would otherwise get stripped. +.IP "\fB\-\-only\-keep\-debug\fR" 4 +.IX Item "--only-keep-debug" +Strip a file, removing contents of any sections that would not be +stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections +intact. In \s-1ELF\s0 files, this preserves all note sections in the output. +.Sp +The intention is that this option will be used in conjunction with +\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable. One a +stripped binary which will occupy less space in \s-1RAM\s0 and in a +distribution and the second a debugging information file which is only +needed if debugging abilities are required. The suggested procedure +to create these files is as follows: +.RS 4 +.IP "1.<Link the executable as normal. Assuming that is is called>" 4 +.IX Item "1.<Link the executable as normal. Assuming that is is called>" +\&\f(CW\*(C`foo\*(C'\fR then... +.ie n .IP "1.<Run ""objcopy \-\-only\-keep\-debug foo foo.dbg"" to>" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-only\-keep\-debug foo foo.dbg\fR to>" 4 +.IX Item "1.<Run objcopy --only-keep-debug foo foo.dbg to>" +create a file containing the debugging info. +.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"" to create a>" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR to create a>" 4 +.IX Item "1.<Run objcopy --strip-debug foo to create a>" +stripped executable. +.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.dbg foo"">" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.dbg foo\fR>" 4 +.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.dbg foo>" +to add a link to the debugging info into the stripped executable. +.RE +.RS 4 +.Sp +Note\-\-\-the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info +file is arbitrary. Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is +optional. You could instead do this: +.IP "1.<Link the executable as normal.>" 4 +.IX Item "1.<Link the executable as normal.>" +.PD 0 +.ie n .IP "1.<Copy ""foo""\fR to \f(CW""foo.full"">" 4 +.el .IP "1.<Copy \f(CWfoo\fR to \f(CWfoo.full\fR>" 4 +.IX Item "1.<Copy foo to foo.full>" +.ie n .IP "1.<Run ""strip \-\-strip\-debug foo"">" 4 +.el .IP "1.<Run \f(CWstrip \-\-strip\-debug foo\fR>" 4 +.IX Item "1.<Run strip --strip-debug foo>" +.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.full foo"">" 4 +.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.full foo\fR>" 4 +.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.full foo>" +.RE +.RS 4 +.PD +.Sp +i.e., the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the +full executable. It does not have to be a file created by the +\&\fB\-\-only\-keep\-debug\fR switch. +.Sp +Note\-\-\-this switch is only intended for use on fully linked files. It +does not make sense to use it on object files where the debugging +information may be incomplete. Besides the gnu_debuglink feature +currently only supports the presence of one filename containing +debugging information, not multiple filenames on a one-per-object-file +basis. +.RE +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Show the version number for \fBstrip\fR. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-verbose\fR" 4 +.IX Item "--verbose" +.PD +Verbose output: list all object files modified. In the case of +archives, \fBstrip \-v\fR lists all members of the archive. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/windmc.1 b/binutils/doc/windmc.1 new file mode 100644 index 0000000..46cadd9 --- /dev/null +++ b/binutils/doc/windmc.1 @@ -0,0 +1,359 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "WINDMC 1" +.TH WINDMC 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +windmc \- generates Windows message resources. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBwindmc\fR reads message definitions from an input file (.mc) and +translate them into a set of output files. The output files may be of +four kinds: +.ie n .IP """h""" 4 +.el .IP "\f(CWh\fR" 4 +.IX Item "h" +A C header file containing the message definitions. +.ie n .IP """rc""" 4 +.el .IP "\f(CWrc\fR" 4 +.IX Item "rc" +A resource file compilable by the \fBwindres\fR tool. +.ie n .IP """bin""" 4 +.el .IP "\f(CWbin\fR" 4 +.IX Item "bin" +One or more binary files containing the resource data for a specific +message language. +.ie n .IP """dbg""" 4 +.el .IP "\f(CWdbg\fR" 4 +.IX Item "dbg" +A C include file that maps message id's to their symbolic name. +.PP +The exact description of these different formats is available in +documentation from Microsoft. +.PP +When \fBwindmc\fR converts from the \f(CW\*(C`mc\*(C'\fR format to the \f(CW\*(C`bin\*(C'\fR +format, \f(CW\*(C`rc\*(C'\fR, \f(CW\*(C`h\*(C'\fR, and optional \f(CW\*(C`dbg\*(C'\fR it is acting like the +Windows Message Compiler. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-a\fR" 4 +.IX Item "-a" +.PD 0 +.IP "\fB\-\-ascii_in\fR" 4 +.IX Item "--ascii_in" +.PD +Specifies that the input file specified is \s-1ANSI\s0. This is the default +behaviour. +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-\-ascii_out\fR" 4 +.IX Item "--ascii_out" +.PD +Specifies that messages in the output \f(CW\*(C`bin\*(C'\fR files should be in \s-1ANSI\s0 +format. +.IP "\fB\-b\fR" 4 +.IX Item "-b" +.PD 0 +.IP "\fB\-\-binprefix\fR" 4 +.IX Item "--binprefix" +.PD +Specifies that \f(CW\*(C`bin\*(C'\fR filenames should have to be prefixed by the +basename of the source file. +.IP "\fB\-c\fR" 4 +.IX Item "-c" +.PD 0 +.IP "\fB\-\-customflag\fR" 4 +.IX Item "--customflag" +.PD +Sets the customer bit in all message id's. +.IP "\fB\-C\fR \fIcodepage\fR" 4 +.IX Item "-C codepage" +.PD 0 +.IP "\fB\-\-codepage_in\fR \fIcodepage\fR" 4 +.IX Item "--codepage_in codepage" +.PD +Sets the default codepage to be used to convert input file to \s-1UTF16\s0. The +default is ocdepage 1252. +.IP "\fB\-d\fR" 4 +.IX Item "-d" +.PD 0 +.IP "\fB\-\-decimal_values\fR" 4 +.IX Item "--decimal_values" +.PD +Outputs the constants in the header file in decimal. Default is using +hexadecimal output. +.IP "\fB\-e\fR \fIext\fR" 4 +.IX Item "-e ext" +.PD 0 +.IP "\fB\-\-extension\fR \fIext\fR" 4 +.IX Item "--extension ext" +.PD +The extension for the header file. The default is .h extension. +.IP "\fB\-F\fR \fItarget\fR" 4 +.IX Item "-F target" +.PD 0 +.IP "\fB\-\-target\fR \fItarget\fR" 4 +.IX Item "--target target" +.PD +Specify the \s-1BFD\s0 format to use for a bin file as output. This +is a \s-1BFD\s0 target name; you can use the \fB\-\-help\fR option to see a list +of supported targets. Normally \fBwindmc\fR will use the default +format, which is the first one listed by the \fB\-\-help\fR option. +.IP "\fB\-h\fR \fIpath\fR" 4 +.IX Item "-h path" +.PD 0 +.IP "\fB\-\-headerdir\fR \fIpath\fR" 4 +.IX Item "--headerdir path" +.PD +The target directory of the generated header file. The default is the +current directory. +.IP "\fB\-H\fR" 4 +.IX Item "-H" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Displays a list of command line options and then exits. +.IP "\fB\-m\fR \fIcharacters\fR" 4 +.IX Item "-m characters" +.PD 0 +.IP "\fB\-\-maxlength\fR \fIcharacters\fR" 4 +.IX Item "--maxlength characters" +.PD +Instructs \fBwindmc\fR to generate a warning if the length +of any message exceeds the number specified. +.IP "\fB\-n\fR" 4 +.IX Item "-n" +.PD 0 +.IP "\fB\-\-nullterminate\fR" 4 +.IX Item "--nullterminate" +.PD +Terminate message text in \f(CW\*(C`bin\*(C'\fR files by zero. By default they are +terminated by \s-1CR/LF\s0. +.IP "\fB\-o\fR" 4 +.IX Item "-o" +.PD 0 +.IP "\fB\-\-hresult_use\fR" 4 +.IX Item "--hresult_use" +.PD +Not yet implemented. Instructs \f(CW\*(C`windmc\*(C'\fR to generate an \s-1OLE2\s0 header +file, using \s-1HRESULT\s0 definitions. Status codes are used if the flag is not +specified. +.IP "\fB\-O\fR \fIcodepage\fR" 4 +.IX Item "-O codepage" +.PD 0 +.IP "\fB\-\-codepage_out\fR \fIcodepage\fR" 4 +.IX Item "--codepage_out codepage" +.PD +Sets the default codepage to be used to output text files. The default +is ocdepage 1252. +.IP "\fB\-r\fR \fIpath\fR" 4 +.IX Item "-r path" +.PD 0 +.IP "\fB\-\-rcdir\fR \fIpath\fR" 4 +.IX Item "--rcdir path" +.PD +The target directory for the generated \f(CW\*(C`rc\*(C'\fR script and the generated +\&\f(CW\*(C`bin\*(C'\fR files that the resource compiler script includes. The default +is the current directory. +.IP "\fB\-u\fR" 4 +.IX Item "-u" +.PD 0 +.IP "\fB\-\-unicode_in\fR" 4 +.IX Item "--unicode_in" +.PD +Specifies that the input file is \s-1UTF16\s0. +.IP "\fB\-U\fR" 4 +.IX Item "-U" +.PD 0 +.IP "\fB\-\-unicode_out\fR" 4 +.IX Item "--unicode_out" +.PD +Specifies that messages in the output \f(CW\*(C`bin\*(C'\fR file should be in \s-1UTF16\s0 +format. This is the default behaviour. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-verbose\fR" 4 +.IX Item "--verbose" +.PD +Enable verbose mode. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Prints the version number for \fBwindmc\fR. +.IP "\fB\-x\fR \fIpath\fR" 4 +.IX Item "-x path" +.PD 0 +.IP "\fB\-\-xdgb\fR \fIpath\fR" 4 +.IX Item "--xdgb path" +.PD +The path of the \f(CW\*(C`dbg\*(C'\fR C include file that maps message id's to the +symbolic name. No such file is generated without specifying the switch. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/doc/windres.1 b/binutils/doc/windres.1 new file mode 100644 index 0000000..20694e0 --- /dev/null +++ b/binutils/doc/windres.1 @@ -0,0 +1,362 @@ +.\" Automatically generated by Pod::Man 2.16 (Pod::Simple 3.05) +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. \*(C+ will +.\" give a nicer C++. Capital omega is used to do unbreakable dashes and +.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, +.\" nothing in troff, for use with C<>. +.tr \(*W- +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" Escape single quotes in literal strings from groff's Unicode transform. +.ie \n(.g .ds Aq \(aq +.el .ds Aq ' +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.ie \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.el \{\ +. de IX +.. +.\} +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "WINDRES 1" +.TH WINDRES 1 "2009-10-16" "binutils-2.20" "GNU Development Tools" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.if n .ad l +.nh +.SH "NAME" +windres \- manipulate Windows resources. +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +windmc [options] input-file +windres [options] [input\-file] [output\-file] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBwindres\fR reads resources from an input file and copies them into +an output file. Either file may be in one of three formats: +.ie n .IP """rc""" 4 +.el .IP "\f(CWrc\fR" 4 +.IX Item "rc" +A text format read by the Resource Compiler. +.ie n .IP """res""" 4 +.el .IP "\f(CWres\fR" 4 +.IX Item "res" +A binary format generated by the Resource Compiler. +.ie n .IP """coff""" 4 +.el .IP "\f(CWcoff\fR" 4 +.IX Item "coff" +A \s-1COFF\s0 object or executable. +.PP +The exact description of these different formats is available in +documentation from Microsoft. +.PP +When \fBwindres\fR converts from the \f(CW\*(C`rc\*(C'\fR format to the \f(CW\*(C`res\*(C'\fR +format, it is acting like the Windows Resource Compiler. When +\&\fBwindres\fR converts from the \f(CW\*(C`res\*(C'\fR format to the \f(CW\*(C`coff\*(C'\fR +format, it is acting like the Windows \f(CW\*(C`CVTRES\*(C'\fR program. +.PP +When \fBwindres\fR generates an \f(CW\*(C`rc\*(C'\fR file, the output is similar +but not identical to the format expected for the input. When an input +\&\f(CW\*(C`rc\*(C'\fR file refers to an external filename, an output \f(CW\*(C`rc\*(C'\fR file +will instead include the file contents. +.PP +If the input or output format is not specified, \fBwindres\fR will +guess based on the file name, or, for the input file, the file contents. +A file with an extension of \fI.rc\fR will be treated as an \f(CW\*(C`rc\*(C'\fR +file, a file with an extension of \fI.res\fR will be treated as a +\&\f(CW\*(C`res\*(C'\fR file, and a file with an extension of \fI.o\fR or +\&\fI.exe\fR will be treated as a \f(CW\*(C`coff\*(C'\fR file. +.PP +If no output file is specified, \fBwindres\fR will print the resources +in \f(CW\*(C`rc\*(C'\fR format to standard output. +.PP +The normal use is for you to write an \f(CW\*(C`rc\*(C'\fR file, use \fBwindres\fR +to convert it to a \s-1COFF\s0 object file, and then link the \s-1COFF\s0 file into +your application. This will make the resources described in the +\&\f(CW\*(C`rc\*(C'\fR file available to Windows. +.SH "OPTIONS" +.IX Header "OPTIONS" +.IP "\fB\-i\fR \fIfilename\fR" 4 +.IX Item "-i filename" +.PD 0 +.IP "\fB\-\-input\fR \fIfilename\fR" 4 +.IX Item "--input filename" +.PD +The name of the input file. If this option is not used, then +\&\fBwindres\fR will use the first non-option argument as the input file +name. If there are no non-option arguments, then \fBwindres\fR will +read from standard input. \fBwindres\fR can not read a \s-1COFF\s0 file from +standard input. +.IP "\fB\-o\fR \fIfilename\fR" 4 +.IX Item "-o filename" +.PD 0 +.IP "\fB\-\-output\fR \fIfilename\fR" 4 +.IX Item "--output filename" +.PD +The name of the output file. If this option is not used, then +\&\fBwindres\fR will use the first non-option argument, after any used +for the input file name, as the output file name. If there is no +non-option argument, then \fBwindres\fR will write to standard output. +\&\fBwindres\fR can not write a \s-1COFF\s0 file to standard output. Note, +for compatibility with \fBrc\fR the option \fB\-fo\fR is also +accepted, but its use is not recommended. +.IP "\fB\-J\fR \fIformat\fR" 4 +.IX Item "-J format" +.PD 0 +.IP "\fB\-\-input\-format\fR \fIformat\fR" 4 +.IX Item "--input-format format" +.PD +The input format to read. \fIformat\fR may be \fBres\fR, \fBrc\fR, or +\&\fBcoff\fR. If no input format is specified, \fBwindres\fR will +guess, as described above. +.IP "\fB\-O\fR \fIformat\fR" 4 +.IX Item "-O format" +.PD 0 +.IP "\fB\-\-output\-format\fR \fIformat\fR" 4 +.IX Item "--output-format format" +.PD +The output format to generate. \fIformat\fR may be \fBres\fR, +\&\fBrc\fR, or \fBcoff\fR. If no output format is specified, +\&\fBwindres\fR will guess, as described above. +.IP "\fB\-F\fR \fItarget\fR" 4 +.IX Item "-F target" +.PD 0 +.IP "\fB\-\-target\fR \fItarget\fR" 4 +.IX Item "--target target" +.PD +Specify the \s-1BFD\s0 format to use for a \s-1COFF\s0 file as input or output. This +is a \s-1BFD\s0 target name; you can use the \fB\-\-help\fR option to see a list +of supported targets. Normally \fBwindres\fR will use the default +format, which is the first one listed by the \fB\-\-help\fR option. +.IP "\fB\-\-preprocessor\fR \fIprogram\fR" 4 +.IX Item "--preprocessor program" +When \fBwindres\fR reads an \f(CW\*(C`rc\*(C'\fR file, it runs it through the C +preprocessor first. This option may be used to specify the preprocessor +to use, including any leading arguments. The default preprocessor +argument is \f(CW\*(C`gcc \-E \-xc\-header \-DRC_INVOKED\*(C'\fR. +.IP "\fB\-I\fR \fIdirectory\fR" 4 +.IX Item "-I directory" +.PD 0 +.IP "\fB\-\-include\-dir\fR \fIdirectory\fR" 4 +.IX Item "--include-dir directory" +.PD +Specify an include directory to use when reading an \f(CW\*(C`rc\*(C'\fR file. +\&\fBwindres\fR will pass this to the preprocessor as an \fB\-I\fR +option. \fBwindres\fR will also search this directory when looking for +files named in the \f(CW\*(C`rc\*(C'\fR file. If the argument passed to this command +matches any of the supported \fIformats\fR (as described in the \fB\-J\fR +option), it will issue a deprecation warning, and behave just like the +\&\fB\-J\fR option. New programs should not use this behaviour. If a +directory happens to match a \fIformat\fR, simple prefix it with \fB./\fR +to disable the backward compatibility. +.IP "\fB\-D\fR \fItarget\fR" 4 +.IX Item "-D target" +.PD 0 +.IP "\fB\-\-define\fR \fIsym\fR\fB[=\fR\fIval\fR\fB]\fR" 4 +.IX Item "--define sym[=val]" +.PD +Specify a \fB\-D\fR option to pass to the preprocessor when reading an +\&\f(CW\*(C`rc\*(C'\fR file. +.IP "\fB\-U\fR \fItarget\fR" 4 +.IX Item "-U target" +.PD 0 +.IP "\fB\-\-undefine\fR \fIsym\fR" 4 +.IX Item "--undefine sym" +.PD +Specify a \fB\-U\fR option to pass to the preprocessor when reading an +\&\f(CW\*(C`rc\*(C'\fR file. +.IP "\fB\-r\fR" 4 +.IX Item "-r" +Ignored for compatibility with rc. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +Enable verbose mode. This tells you what the preprocessor is if you +didn't specify one. +.IP "\fB\-c\fR \fIval\fR" 4 +.IX Item "-c val" +.PD 0 +.IP "\fB\-\-codepage\fR \fIval\fR" 4 +.IX Item "--codepage val" +.PD +Specify the default codepage to use when reading an \f(CW\*(C`rc\*(C'\fR file. +\&\fIval\fR should be a hexadecimal prefixed by \fB0x\fR or decimal +codepage code. The valid range is from zero up to 0xffff, but the +validity of the codepage is host and configuration dependent. +.IP "\fB\-l\fR \fIval\fR" 4 +.IX Item "-l val" +.PD 0 +.IP "\fB\-\-language\fR \fIval\fR" 4 +.IX Item "--language val" +.PD +Specify the default language to use when reading an \f(CW\*(C`rc\*(C'\fR file. +\&\fIval\fR should be a hexadecimal language code. The low eight bits are +the language, and the high eight bits are the sublanguage. +.IP "\fB\-\-use\-temp\-file\fR" 4 +.IX Item "--use-temp-file" +Use a temporary file to instead of using popen to read the output of +the preprocessor. Use this option if the popen implementation is buggy +on the host (eg., certain non-English language versions of Windows 95 and +Windows 98 are known to have buggy popen where the output will instead +go the console). +.IP "\fB\-\-no\-use\-temp\-file\fR" 4 +.IX Item "--no-use-temp-file" +Use popen, not a temporary file, to read the output of the preprocessor. +This is the default behaviour. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Prints a usage summary. +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Prints the version number for \fBwindres\fR. +.IP "\fB\-\-yydebug\fR" 4 +.IX Item "--yydebug" +If \fBwindres\fR is compiled with \f(CW\*(C`YYDEBUG\*(C'\fR defined as \f(CW1\fR, +this will turn on parser debugging. +.IP "\fB@\fR\fIfile\fR" 4 +.IX Item "@file" +Read command-line options from \fIfile\fR. The options read are +inserted in place of the original @\fIfile\fR option. If \fIfile\fR +does not exist, or cannot be read, then the option will be treated +literally, and not removed. +.Sp +Options in \fIfile\fR are separated by whitespace. A whitespace +character may be included in an option by surrounding the entire +option in either single or double quotes. Any character (including a +backslash) may be included by prefixing the character to be included +with a backslash. The \fIfile\fR may itself contain additional +@\fIfile\fR options; any such options will be processed recursively. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +the Info entries for \fIbinutils\fR. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +.PP +Permission is granted to copy, distribute and/or modify this document +under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, with no Front-Cover Texts, and with no +Back-Cover Texts. A copy of the license is included in the +section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". diff --git a/binutils/mcparse.c b/binutils/mcparse.c new file mode 100644 index 0000000..2c936d8 --- /dev/null +++ b/binutils/mcparse.c @@ -0,0 +1,2156 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NL = 258, + MCIDENT = 259, + MCFILENAME = 260, + MCLINE = 261, + MCCOMMENT = 262, + MCTOKEN = 263, + MCENDLINE = 264, + MCLANGUAGENAMES = 265, + MCFACILITYNAMES = 266, + MCSEVERITYNAMES = 267, + MCOUTPUTBASE = 268, + MCMESSAGEIDTYPEDEF = 269, + MCLANGUAGE = 270, + MCMESSAGEID = 271, + MCSEVERITY = 272, + MCFACILITY = 273, + MCSYMBOLICNAME = 274, + MCNUMBER = 275 + }; +#endif +/* Tokens. */ +#define NL 258 +#define MCIDENT 259 +#define MCFILENAME 260 +#define MCLINE 261 +#define MCCOMMENT 262 +#define MCTOKEN 263 +#define MCENDLINE 264 +#define MCLANGUAGENAMES 265 +#define MCFACILITYNAMES 266 +#define MCSEVERITYNAMES 267 +#define MCOUTPUTBASE 268 +#define MCMESSAGEIDTYPEDEF 269 +#define MCLANGUAGE 270 +#define MCMESSAGEID 271 +#define MCSEVERITY 272 +#define MCFACILITY 273 +#define MCSYMBOLICNAME 274 +#define MCNUMBER 275 + + + + +/* Copy the first part of user declarations. */ +#line 1 "mcparse.y" + /* mcparse.y -- parser for Windows mc files + Copyright 2007 + Free Software Foundation, Inc. + + Parser for Windows mc files + Written by Kai Tietz, Onevision. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* This is a parser for Windows rc files. It is based on the parser + by Gunther Ebert <gunther.ebert@ixos-leipzig.de>. */ + +#include "sysdep.h" +#include "bfd.h" +#include "bucomm.h" +#include "libiberty.h" +#include "windmc.h" +#include "safe-ctype.h" + +static rc_uint_type mc_last_id = 0; +static rc_uint_type mc_sefa_val = 0; +static unichar *mc_last_symbol = NULL; +static const mc_keyword *mc_cur_severity = NULL; +static const mc_keyword *mc_cur_facility = NULL; +static mc_node *cur_node = NULL; + + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 45 "mcparse.y" +{ + rc_uint_type ival; + unichar *ustr; + const mc_keyword *tok; + mc_node *nod; +} +/* Line 193 of yacc.c. */ +#line 186 "mcparse.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 199 "mcparse.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 3 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 114 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 26 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 29 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 82 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 125 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 275 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 22, 23, 2, 25, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 24, 2, + 2, 21, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint16 yyprhs[] = +{ + 0, 0, 3, 5, 6, 9, 11, 13, 15, 17, + 23, 29, 33, 36, 42, 48, 52, 55, 61, 67, + 71, 74, 78, 82, 86, 89, 91, 94, 96, 101, + 105, 108, 110, 113, 115, 120, 124, 127, 129, 132, + 134, 141, 148, 153, 157, 160, 161, 164, 167, 168, + 173, 177, 181, 184, 185, 187, 190, 193, 194, 197, + 200, 203, 207, 211, 215, 217, 220, 225, 227, 230, + 232, 235, 237, 240, 246, 252, 258, 263, 266, 268, + 270, 271, 272 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 27, 0, -1, 28, -1, -1, 28, 29, -1, 30, + -1, 38, -1, 49, -1, 1, -1, 12, 21, 22, + 31, 23, -1, 12, 21, 22, 31, 1, -1, 12, + 21, 1, -1, 12, 1, -1, 10, 21, 22, 35, + 23, -1, 10, 21, 22, 35, 1, -1, 10, 21, + 1, -1, 10, 1, -1, 11, 21, 22, 33, 23, + -1, 11, 21, 22, 33, 1, -1, 11, 21, 1, + -1, 11, 1, -1, 13, 21, 20, -1, 14, 21, + 4, -1, 14, 21, 1, -1, 14, 1, -1, 32, + -1, 31, 32, -1, 1, -1, 51, 21, 20, 37, + -1, 51, 21, 1, -1, 51, 1, -1, 34, -1, + 33, 34, -1, 1, -1, 51, 21, 20, 37, -1, + 51, 21, 1, -1, 51, 1, -1, 36, -1, 35, + 36, -1, 1, -1, 51, 21, 20, 54, 24, 5, + -1, 51, 21, 20, 54, 24, 1, -1, 51, 21, + 20, 1, -1, 51, 21, 1, -1, 51, 1, -1, + -1, 24, 4, -1, 24, 1, -1, -1, 40, 42, + 39, 46, -1, 16, 21, 41, -1, 16, 21, 1, + -1, 16, 1, -1, -1, 20, -1, 25, 20, -1, + 25, 1, -1, -1, 42, 43, -1, 42, 44, -1, + 42, 45, -1, 17, 21, 8, -1, 18, 21, 8, + -1, 19, 21, 4, -1, 47, -1, 46, 47, -1, + 50, 53, 48, 9, -1, 6, -1, 48, 6, -1, + 1, -1, 48, 1, -1, 7, -1, 49, 7, -1, + 15, 52, 21, 8, 3, -1, 15, 52, 21, 4, + 3, -1, 15, 52, 21, 51, 1, -1, 15, 52, + 21, 1, -1, 15, 1, -1, 4, -1, 8, -1, + -1, -1, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 67, 67, 70, 72, 74, 75, 76, 81, 85, + 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 103, 107, 111, 118, 119, 120, 124, 128, + 129, 133, 134, 135, 139, 143, 144, 148, 149, 150, + 154, 158, 159, 160, 161, 166, 169, 173, 178, 177, + 190, 191, 192, 196, 199, 203, 207, 212, 219, 225, + 231, 239, 247, 255, 262, 263, 267, 277, 281, 293, + 294, 297, 298, 312, 316, 321, 326, 331, 338, 339, + 343, 347, 351 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "NL", "MCIDENT", "MCFILENAME", "MCLINE", + "MCCOMMENT", "MCTOKEN", "MCENDLINE", "MCLANGUAGENAMES", + "MCFACILITYNAMES", "MCSEVERITYNAMES", "MCOUTPUTBASE", + "MCMESSAGEIDTYPEDEF", "MCLANGUAGE", "MCMESSAGEID", "MCSEVERITY", + "MCFACILITY", "MCSYMBOLICNAME", "MCNUMBER", "'='", "'('", "')'", "':'", + "'+'", "$accept", "input", "entities", "entity", "global_section", + "severitymaps", "severitymap", "facilitymaps", "facilitymap", "langmaps", + "langmap", "alias_name", "message", "@1", "id", "vid", "sefasy_def", + "severity", "facility", "symbol", "lang_entities", "lang_entity", + "lines", "comments", "lang", "token", "lex_want_nl", "lex_want_line", + "lex_want_filename", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 61, 40, 41, 58, 43 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 26, 27, 28, 28, 29, 29, 29, 29, 30, + 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, + 30, 30, 30, 30, 30, 31, 31, 31, 32, 32, + 32, 33, 33, 33, 34, 34, 34, 35, 35, 35, + 36, 36, 36, 36, 36, 37, 37, 37, 39, 38, + 40, 40, 40, 41, 41, 41, 41, 42, 42, 42, + 42, 43, 44, 45, 46, 46, 47, 48, 48, 48, + 48, 49, 49, 50, 50, 50, 50, 50, 51, 51, + 52, 53, 54 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 1, 0, 2, 1, 1, 1, 1, 5, + 5, 3, 2, 5, 5, 3, 2, 5, 5, 3, + 2, 3, 3, 3, 2, 1, 2, 1, 4, 3, + 2, 1, 2, 1, 4, 3, 2, 1, 2, 1, + 6, 6, 4, 3, 2, 0, 2, 2, 0, 4, + 3, 3, 2, 0, 1, 2, 2, 0, 2, 2, + 2, 3, 3, 3, 1, 2, 4, 1, 2, 1, + 2, 1, 2, 5, 5, 5, 4, 2, 1, 1, + 0, 0, 0 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 3, 0, 0, 1, 8, 71, 0, 0, 0, 0, + 0, 0, 4, 5, 6, 57, 7, 16, 0, 20, + 0, 12, 0, 0, 24, 0, 52, 0, 48, 72, + 15, 0, 19, 0, 11, 0, 21, 23, 22, 51, + 54, 0, 50, 0, 0, 0, 0, 58, 59, 60, + 39, 78, 79, 0, 37, 0, 33, 0, 31, 0, + 27, 0, 25, 0, 56, 55, 0, 0, 0, 0, + 49, 64, 81, 14, 13, 38, 44, 0, 18, 17, + 32, 36, 0, 10, 9, 26, 30, 0, 61, 62, + 63, 77, 0, 65, 0, 43, 0, 35, 45, 29, + 45, 0, 69, 67, 0, 42, 0, 0, 34, 28, + 76, 78, 79, 0, 70, 68, 66, 0, 47, 46, + 74, 73, 75, 41, 40 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 1, 2, 12, 13, 61, 62, 57, 58, 53, + 54, 108, 14, 46, 15, 42, 28, 47, 48, 49, + 70, 71, 104, 16, 72, 55, 92, 94, 106 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -34 +static const yytype_int8 yypact[] = +{ + -34, 62, 70, -34, -34, -34, 15, 22, 30, -15, + 34, 37, -34, -34, -34, -34, 56, -34, 10, -34, + 12, -34, 20, 25, -34, 52, -34, 0, 80, -34, + -34, 71, -34, 84, -34, 86, -34, -34, -34, -34, + -34, 45, -34, 1, 68, 74, 76, -34, -34, -34, + -34, -34, -34, 4, -34, 38, -34, 6, -34, 39, + -34, 29, -34, 40, -34, -34, 93, 94, 99, 43, + 76, -34, -34, -34, -34, -34, -34, 46, -34, -34, + -34, -34, 47, -34, -34, -34, -34, 49, -34, -34, + -34, -34, 83, -34, 3, -34, 2, -34, 81, -34, + 81, 92, -34, -34, 48, -34, 82, 72, -34, -34, + -34, 104, 105, 108, -34, -34, -34, 73, -34, -34, + -34, -34, -34, -34, -34 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -34, -34, -34, -34, -34, -34, 50, -34, 53, -34, + 59, 13, -34, -34, -34, -34, -34, -34, -34, -34, + -34, 44, -34, -34, -34, -33, -34, -34, -34 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -83 +static const yytype_int8 yytable[] = +{ + 59, 39, 63, 105, 102, 73, 23, 78, 51, 103, + 51, 30, 52, 32, 52, -53, 17, -53, -53, -53, + 40, 34, 66, 19, 59, 41, -82, 74, 63, 79, + 83, 21, 31, 51, 33, 24, 18, 52, 26, 76, + 81, 86, 35, 20, 91, 36, 64, 95, 97, 114, + 99, 22, 84, 37, 115, 25, 38, 116, 27, 77, + 82, 87, 3, 29, -80, 65, 96, 98, 113, 100, + -2, 4, 50, 118, 123, 51, 119, 5, 124, 52, + 6, 7, 8, 9, 10, 56, 11, 60, 51, 67, + 51, 69, 52, 110, 52, 68, 111, 43, 44, 45, + 112, 88, 89, 90, 101, 107, 117, 120, 121, 122, + 80, 85, 75, 109, 93 +}; + +static const yytype_uint8 yycheck[] = +{ + 33, 1, 35, 1, 1, 1, 21, 1, 4, 6, + 4, 1, 8, 1, 8, 15, 1, 17, 18, 19, + 20, 1, 21, 1, 57, 25, 24, 23, 61, 23, + 1, 1, 22, 4, 22, 1, 21, 8, 1, 1, + 1, 1, 22, 21, 1, 20, 1, 1, 1, 1, + 1, 21, 23, 1, 6, 21, 4, 9, 21, 21, + 21, 21, 0, 7, 21, 20, 20, 20, 101, 20, + 0, 1, 1, 1, 1, 4, 4, 7, 5, 8, + 10, 11, 12, 13, 14, 1, 16, 1, 4, 21, + 4, 15, 8, 1, 8, 21, 4, 17, 18, 19, + 8, 8, 8, 4, 21, 24, 24, 3, 3, 1, + 57, 61, 53, 100, 70 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 27, 28, 0, 1, 7, 10, 11, 12, 13, + 14, 16, 29, 30, 38, 40, 49, 1, 21, 1, + 21, 1, 21, 21, 1, 21, 1, 21, 42, 7, + 1, 22, 1, 22, 1, 22, 20, 1, 4, 1, + 20, 25, 41, 17, 18, 19, 39, 43, 44, 45, + 1, 4, 8, 35, 36, 51, 1, 33, 34, 51, + 1, 31, 32, 51, 1, 20, 21, 21, 21, 15, + 46, 47, 50, 1, 23, 36, 1, 21, 1, 23, + 34, 1, 21, 1, 23, 32, 1, 21, 8, 8, + 4, 1, 52, 47, 53, 1, 20, 1, 20, 1, + 20, 21, 1, 6, 48, 1, 54, 24, 37, 37, + 1, 4, 8, 51, 1, 6, 9, 24, 1, 4, + 3, 3, 1, 1, 5 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 7: +#line 77 "mcparse.y" + { + cur_node = mc_add_node (); + cur_node->user_text = (yyvsp[(1) - (1)].ustr); + } + break; + + case 8: +#line 81 "mcparse.y" + { mc_fatal ("syntax error"); } + break; + + case 10: +#line 86 "mcparse.y" + { mc_fatal ("missing ')' in SeverityNames"); } + break; + + case 11: +#line 87 "mcparse.y" + { mc_fatal ("missing '(' in SeverityNames"); } + break; + + case 12: +#line 88 "mcparse.y" + { mc_fatal ("missing '=' for SeverityNames"); } + break; + + case 14: +#line 90 "mcparse.y" + { mc_fatal ("missing ')' in LanguageNames"); } + break; + + case 15: +#line 91 "mcparse.y" + { mc_fatal ("missing '(' in LanguageNames"); } + break; + + case 16: +#line 92 "mcparse.y" + { mc_fatal ("missing '=' for LanguageNames"); } + break; + + case 18: +#line 94 "mcparse.y" + { mc_fatal ("missing ')' in FacilityNames"); } + break; + + case 19: +#line 95 "mcparse.y" + { mc_fatal ("missing '(' in FacilityNames"); } + break; + + case 20: +#line 96 "mcparse.y" + { mc_fatal ("missing '=' for FacilityNames"); } + break; + + case 21: +#line 98 "mcparse.y" + { + if ((yyvsp[(3) - (3)].ival) != 10 && (yyvsp[(3) - (3)].ival) != 16) + mc_fatal ("OutputBase allows 10 or 16 as value"); + mcset_out_values_are_decimal = ((yyvsp[(3) - (3)].ival) == 10 ? 1 : 0); + } + break; + + case 22: +#line 104 "mcparse.y" + { + mcset_msg_id_typedef = (yyvsp[(3) - (3)].ustr); + } + break; + + case 23: +#line 108 "mcparse.y" + { + mc_fatal ("MessageIdTypedef expects an identifier"); + } + break; + + case 24: +#line 112 "mcparse.y" + { + mc_fatal ("missing '=' for MessageIdTypedef"); + } + break; + + case 27: +#line 120 "mcparse.y" + { mc_fatal ("severity ident missing"); } + break; + + case 28: +#line 125 "mcparse.y" + { + mc_add_keyword ((yyvsp[(1) - (4)].ustr), MCTOKEN, "severity", (yyvsp[(3) - (4)].ival), (yyvsp[(4) - (4)].ustr)); + } + break; + + case 29: +#line 128 "mcparse.y" + { mc_fatal ("severity number missing"); } + break; + + case 30: +#line 129 "mcparse.y" + { mc_fatal ("severity missing '='"); } + break; + + case 33: +#line 135 "mcparse.y" + { mc_fatal ("missing ident in FacilityNames"); } + break; + + case 34: +#line 140 "mcparse.y" + { + mc_add_keyword ((yyvsp[(1) - (4)].ustr), MCTOKEN, "facility", (yyvsp[(3) - (4)].ival), (yyvsp[(4) - (4)].ustr)); + } + break; + + case 35: +#line 143 "mcparse.y" + { mc_fatal ("facility number missing"); } + break; + + case 36: +#line 144 "mcparse.y" + { mc_fatal ("facility missing '='"); } + break; + + case 39: +#line 150 "mcparse.y" + { mc_fatal ("missing ident in LanguageNames"); } + break; + + case 40: +#line 155 "mcparse.y" + { + mc_add_keyword ((yyvsp[(1) - (6)].ustr), MCTOKEN, "language", (yyvsp[(3) - (6)].ival), (yyvsp[(6) - (6)].ustr)); + } + break; + + case 41: +#line 158 "mcparse.y" + { mc_fatal ("missing filename in LanguageNames"); } + break; + + case 42: +#line 159 "mcparse.y" + { mc_fatal ("missing ':' in LanguageNames"); } + break; + + case 43: +#line 160 "mcparse.y" + { mc_fatal ("missing language code in LanguageNames"); } + break; + + case 44: +#line 161 "mcparse.y" + { mc_fatal ("missing '=' for LanguageNames"); } + break; + + case 45: +#line 166 "mcparse.y" + { + (yyval.ustr) = NULL; + } + break; + + case 46: +#line 170 "mcparse.y" + { + (yyval.ustr) = (yyvsp[(2) - (2)].ustr); + } + break; + + case 47: +#line 173 "mcparse.y" + { mc_fatal ("illegal token in identifier"); (yyval.ustr) = NULL; } + break; + + case 48: +#line 178 "mcparse.y" + { + cur_node = mc_add_node (); + cur_node->symbol = mc_last_symbol; + cur_node->facility = mc_cur_facility; + cur_node->severity = mc_cur_severity; + cur_node->id = ((yyvsp[(1) - (2)].ival) & 0xffffUL); + cur_node->vid = ((yyvsp[(1) - (2)].ival) & 0xffffUL) | mc_sefa_val; + mc_last_id = (yyvsp[(1) - (2)].ival); + } + break; + + case 50: +#line 190 "mcparse.y" + { (yyval.ival) = (yyvsp[(3) - (3)].ival); } + break; + + case 51: +#line 191 "mcparse.y" + { mc_fatal ("missing number in MessageId"); (yyval.ival) = 0; } + break; + + case 52: +#line 192 "mcparse.y" + { mc_fatal ("missing '=' for MessageId"); (yyval.ival) = 0; } + break; + + case 53: +#line 196 "mcparse.y" + { + (yyval.ival) = ++mc_last_id; + } + break; + + case 54: +#line 200 "mcparse.y" + { + (yyval.ival) = (yyvsp[(1) - (1)].ival); + } + break; + + case 55: +#line 204 "mcparse.y" + { + (yyval.ival) = mc_last_id + (yyvsp[(2) - (2)].ival); + } + break; + + case 56: +#line 207 "mcparse.y" + { mc_fatal ("missing number after MessageId '+'"); } + break; + + case 57: +#line 212 "mcparse.y" + { + (yyval.ival) = 0; + mc_sefa_val = (mcset_custom_bit ? 1 : 0) << 29; + mc_last_symbol = NULL; + mc_cur_severity = NULL; + mc_cur_facility = NULL; + } + break; + + case 58: +#line 220 "mcparse.y" + { + if ((yyvsp[(1) - (2)].ival) & 1) + mc_warn (_("duplicate definition of Severity")); + (yyval.ival) = (yyvsp[(1) - (2)].ival) | 1; + } + break; + + case 59: +#line 226 "mcparse.y" + { + if ((yyvsp[(1) - (2)].ival) & 2) + mc_warn (_("duplicate definition of Facility")); + (yyval.ival) = (yyvsp[(1) - (2)].ival) | 2; + } + break; + + case 60: +#line 232 "mcparse.y" + { + if ((yyvsp[(1) - (2)].ival) & 4) + mc_warn (_("duplicate definition of SymbolicName")); + (yyval.ival) = (yyvsp[(1) - (2)].ival) | 4; + } + break; + + case 61: +#line 240 "mcparse.y" + { + mc_sefa_val &= ~ (0x3UL << 30); + mc_sefa_val |= (((yyvsp[(3) - (3)].tok)->nval & 0x3UL) << 30); + mc_cur_severity = (yyvsp[(3) - (3)].tok); + } + break; + + case 62: +#line 248 "mcparse.y" + { + mc_sefa_val &= ~ (0xfffUL << 16); + mc_sefa_val |= (((yyvsp[(3) - (3)].tok)->nval & 0xfffUL) << 16); + mc_cur_facility = (yyvsp[(3) - (3)].tok); + } + break; + + case 63: +#line 256 "mcparse.y" + { + mc_last_symbol = (yyvsp[(3) - (3)].ustr); + } + break; + + case 66: +#line 268 "mcparse.y" + { + mc_node_lang *h; + h = mc_add_node_lang (cur_node, (yyvsp[(1) - (4)].tok), cur_node->vid); + h->message = (yyvsp[(3) - (4)].ustr); + if (mcset_max_message_length != 0 && unichar_len (h->message) > mcset_max_message_length) + mc_warn ("message length to long"); + } + break; + + case 67: +#line 278 "mcparse.y" + { + (yyval.ustr) = (yyvsp[(1) - (1)].ustr); + } + break; + + case 68: +#line 282 "mcparse.y" + { + unichar *h; + rc_uint_type l1,l2; + l1 = unichar_len ((yyvsp[(1) - (2)].ustr)); + l2 = unichar_len ((yyvsp[(2) - (2)].ustr)); + h = (unichar *) res_alloc ((l1 + l2 + 1) * sizeof (unichar)); + if (l1) memcpy (h, (yyvsp[(1) - (2)].ustr), l1 * sizeof (unichar)); + if (l2) memcpy (&h[l1], (yyvsp[(2) - (2)].ustr), l2 * sizeof (unichar)); + h[l1 + l2] = 0; + (yyval.ustr) = h; + } + break; + + case 69: +#line 293 "mcparse.y" + { mc_fatal ("missing end of message text"); (yyval.ustr) = NULL; } + break; + + case 70: +#line 294 "mcparse.y" + { mc_fatal ("missing end of message text"); (yyval.ustr) = (yyvsp[(1) - (2)].ustr); } + break; + + case 71: +#line 297 "mcparse.y" + { (yyval.ustr) = (yyvsp[(1) - (1)].ustr); } + break; + + case 72: +#line 299 "mcparse.y" + { + unichar *h; + rc_uint_type l1,l2; + l1 = unichar_len ((yyvsp[(1) - (2)].ustr)); + l2 = unichar_len ((yyvsp[(2) - (2)].ustr)); + h = (unichar *) res_alloc ((l1 + l2 + 1) * sizeof (unichar)); + if (l1) memcpy (h, (yyvsp[(1) - (2)].ustr), l1 * sizeof (unichar)); + if (l2) memcpy (&h[l1], (yyvsp[(2) - (2)].ustr), l2 * sizeof (unichar)); + h[l1 + l2] = 0; + (yyval.ustr) = h; + } + break; + + case 73: +#line 313 "mcparse.y" + { + (yyval.tok) = (yyvsp[(4) - (5)].tok); + } + break; + + case 74: +#line 317 "mcparse.y" + { + (yyval.tok) = NULL; + mc_fatal (_("undeclared language identifier")); + } + break; + + case 75: +#line 322 "mcparse.y" + { + (yyval.tok) = NULL; + mc_fatal ("missing newline after Language"); + } + break; + + case 76: +#line 327 "mcparse.y" + { + (yyval.tok) = NULL; + mc_fatal ("missing ident for Language"); + } + break; + + case 77: +#line 332 "mcparse.y" + { + (yyval.tok) = NULL; + mc_fatal ("missing '=' for Language"); + } + break; + + case 78: +#line 338 "mcparse.y" + { (yyval.ustr) = (yyvsp[(1) - (1)].ustr); } + break; + + case 79: +#line 339 "mcparse.y" + { (yyval.ustr) = (yyvsp[(1) - (1)].tok)->usz; } + break; + + case 80: +#line 343 "mcparse.y" + { mclex_want_nl = 1; } + break; + + case 81: +#line 347 "mcparse.y" + { mclex_want_line = 1; } + break; + + case 82: +#line 351 "mcparse.y" + { mclex_want_filename = 1; } + break; + + +/* Line 1267 of yacc.c. */ +#line 1939 "mcparse.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 354 "mcparse.y" + + +/* Something else. */ + diff --git a/binutils/mcparse.h b/binutils/mcparse.h new file mode 100644 index 0000000..ea4bfe6 --- /dev/null +++ b/binutils/mcparse.h @@ -0,0 +1,103 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + NL = 258, + MCIDENT = 259, + MCFILENAME = 260, + MCLINE = 261, + MCCOMMENT = 262, + MCTOKEN = 263, + MCENDLINE = 264, + MCLANGUAGENAMES = 265, + MCFACILITYNAMES = 266, + MCSEVERITYNAMES = 267, + MCOUTPUTBASE = 268, + MCMESSAGEIDTYPEDEF = 269, + MCLANGUAGE = 270, + MCMESSAGEID = 271, + MCSEVERITY = 272, + MCFACILITY = 273, + MCSYMBOLICNAME = 274, + MCNUMBER = 275 + }; +#endif +/* Tokens. */ +#define NL 258 +#define MCIDENT 259 +#define MCFILENAME 260 +#define MCLINE 261 +#define MCCOMMENT 262 +#define MCTOKEN 263 +#define MCENDLINE 264 +#define MCLANGUAGENAMES 265 +#define MCFACILITYNAMES 266 +#define MCSEVERITYNAMES 267 +#define MCOUTPUTBASE 268 +#define MCMESSAGEIDTYPEDEF 269 +#define MCLANGUAGE 270 +#define MCMESSAGEID 271 +#define MCSEVERITY 272 +#define MCFACILITY 273 +#define MCSYMBOLICNAME 274 +#define MCNUMBER 275 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 45 "mcparse.y" +{ + rc_uint_type ival; + unichar *ustr; + const mc_keyword *tok; + mc_node *nod; +} +/* Line 1529 of yacc.c. */ +#line 96 "mcparse.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/nlmheader.c b/binutils/nlmheader.c new file mode 100644 index 0000000..34956d7 --- /dev/null +++ b/binutils/nlmheader.c @@ -0,0 +1,2698 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + CHECK = 258, + CODESTART = 259, + COPYRIGHT = 260, + CUSTOM = 261, + DATE = 262, + DEBUG = 263, + DESCRIPTION = 264, + EXIT = 265, + EXPORT = 266, + FLAG_ON = 267, + FLAG_OFF = 268, + FULLMAP = 269, + HELP = 270, + IMPORT = 271, + INPUT = 272, + MAP = 273, + MESSAGES = 274, + MODULE = 275, + MULTIPLE = 276, + OS_DOMAIN = 277, + OUTPUT = 278, + PSEUDOPREEMPTION = 279, + REENTRANT = 280, + SCREENNAME = 281, + SHARELIB = 282, + STACK = 283, + START = 284, + SYNCHRONIZE = 285, + THREADNAME = 286, + TYPE = 287, + VERBOSE = 288, + VERSIONK = 289, + XDCDATA = 290, + STRING = 291, + QUOTED_STRING = 292 + }; +#endif +/* Tokens. */ +#define CHECK 258 +#define CODESTART 259 +#define COPYRIGHT 260 +#define CUSTOM 261 +#define DATE 262 +#define DEBUG 263 +#define DESCRIPTION 264 +#define EXIT 265 +#define EXPORT 266 +#define FLAG_ON 267 +#define FLAG_OFF 268 +#define FULLMAP 269 +#define HELP 270 +#define IMPORT 271 +#define INPUT 272 +#define MAP 273 +#define MESSAGES 274 +#define MODULE 275 +#define MULTIPLE 276 +#define OS_DOMAIN 277 +#define OUTPUT 278 +#define PSEUDOPREEMPTION 279 +#define REENTRANT 280 +#define SCREENNAME 281 +#define SHARELIB 282 +#define STACK 283 +#define START 284 +#define SYNCHRONIZE 285 +#define THREADNAME 286 +#define TYPE 287 +#define VERBOSE 288 +#define VERSIONK 289 +#define XDCDATA 290 +#define STRING 291 +#define QUOTED_STRING 292 + + + + +/* Copy the first part of user declarations. */ +#line 1 "nlmheader.y" +/* nlmheader.y - parse NLM header specification keywords. + Copyright 1993, 1994, 1995, 1997, 1998, 2001, 2002, 2003, 2005, 2007 + Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + +/* Written by Ian Lance Taylor <ian@cygnus.com>. + + This bison file parses the commands recognized by the NetWare NLM + linker, except for lists of object files. It stores the + information in global variables. + + This implementation is based on the description in the NetWare Tool + Maker Specification manual, edition 1.0. */ + +#include "sysdep.h" +#include "safe-ctype.h" +#include "bfd.h" +#include "nlm/common.h" +#include "nlm/internal.h" +#include "bucomm.h" +#include "nlmconv.h" + +/* Information is stored in the structures pointed to by these + variables. */ + +Nlm_Internal_Fixed_Header *fixed_hdr; +Nlm_Internal_Variable_Header *var_hdr; +Nlm_Internal_Version_Header *version_hdr; +Nlm_Internal_Copyright_Header *copyright_hdr; +Nlm_Internal_Extended_Header *extended_hdr; + +/* Procedure named by CHECK. */ +char *check_procedure; +/* File named by CUSTOM. */ +char *custom_file; +/* Whether to generate debugging information (DEBUG). */ +bfd_boolean debug_info; +/* Procedure named by EXIT. */ +char *exit_procedure; +/* Exported symbols (EXPORT). */ +struct string_list *export_symbols; +/* List of files from INPUT. */ +struct string_list *input_files; +/* Map file name (MAP, FULLMAP). */ +char *map_file; +/* Whether a full map has been requested (FULLMAP). */ +bfd_boolean full_map; +/* File named by HELP. */ +char *help_file; +/* Imported symbols (IMPORT). */ +struct string_list *import_symbols; +/* File named by MESSAGES. */ +char *message_file; +/* Autoload module list (MODULE). */ +struct string_list *modules; +/* File named by OUTPUT. */ +char *output_file; +/* File named by SHARELIB. */ +char *sharelib_file; +/* Start procedure name (START). */ +char *start_procedure; +/* VERBOSE. */ +bfd_boolean verbose; +/* RPC description file (XDCDATA). */ +char *rpc_file; + +/* The number of serious errors that have occurred. */ +int parse_errors; + +/* The current symbol prefix when reading a list of import or export + symbols. */ +static char *symbol_prefix; + +/* Parser error message handler. */ +#define yyerror(msg) nlmheader_error (msg); + +/* Local functions. */ +static int yylex (void); +static void nlmlex_file_push (const char *); +static bfd_boolean nlmlex_file_open (const char *); +static int nlmlex_buf_init (void); +static char nlmlex_buf_add (int); +static long nlmlex_get_number (const char *); +static void nlmheader_identify (void); +static void nlmheader_warn (const char *, int); +static void nlmheader_error (const char *); +static struct string_list * string_list_cons (char *, struct string_list *); +static struct string_list * string_list_append (struct string_list *, + struct string_list *); +static struct string_list * string_list_append1 (struct string_list *, + char *); +static char *xstrdup (const char *); + + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 113 "nlmheader.y" +{ + char *string; + struct string_list *list; +} +/* Line 193 of yacc.c. */ +#line 286 "nlmheader.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 299 "nlmheader.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 64 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 73 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 40 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 11 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 52 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 82 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 292 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 38, 39, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, + 35, 36, 37 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 5, 6, 9, 12, 15, 18, 21, + 26, 28, 31, 34, 35, 39, 42, 45, 47, 50, + 53, 54, 58, 61, 63, 66, 69, 72, 74, 76, + 79, 81, 83, 86, 89, 92, 95, 97, 100, 103, + 105, 110, 114, 117, 118, 120, 122, 124, 127, 130, + 134, 136, 137 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 41, 0, -1, 42, -1, -1, 43, 42, -1, 3, + 36, -1, 4, 36, -1, 5, 37, -1, 6, 36, + -1, 7, 36, 36, 36, -1, 8, -1, 9, 37, + -1, 10, 36, -1, -1, 11, 44, 46, -1, 12, + 36, -1, 13, 36, -1, 14, -1, 14, 36, -1, + 15, 36, -1, -1, 16, 45, 46, -1, 17, 50, + -1, 18, -1, 18, 36, -1, 19, 36, -1, 20, + 50, -1, 21, -1, 22, -1, 23, 36, -1, 24, + -1, 25, -1, 26, 37, -1, 27, 36, -1, 28, + 36, -1, 29, 36, -1, 30, -1, 31, 37, -1, + 32, 36, -1, 33, -1, 34, 36, 36, 36, -1, + 34, 36, 36, -1, 35, 36, -1, -1, 47, -1, + 49, -1, 48, -1, 47, 49, -1, 47, 48, -1, + 38, 36, 39, -1, 36, -1, -1, 36, 50, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 144, 144, 149, 151, 157, 161, 166, 183, 187, + 205, 209, 225, 230, 229, 237, 242, 247, 252, 257, + 262, 261, 269, 273, 277, 281, 285, 289, 293, 297, + 304, 308, 312, 328, 332, 337, 341, 345, 361, 366, + 370, 394, 410, 420, 423, 434, 438, 442, 446, 455, + 466, 483, 486 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "CHECK", "CODESTART", "COPYRIGHT", + "CUSTOM", "DATE", "DEBUG", "DESCRIPTION", "EXIT", "EXPORT", "FLAG_ON", + "FLAG_OFF", "FULLMAP", "HELP", "IMPORT", "INPUT", "MAP", "MESSAGES", + "MODULE", "MULTIPLE", "OS_DOMAIN", "OUTPUT", "PSEUDOPREEMPTION", + "REENTRANT", "SCREENNAME", "SHARELIB", "STACK", "START", "SYNCHRONIZE", + "THREADNAME", "TYPE", "VERBOSE", "VERSIONK", "XDCDATA", "STRING", + "QUOTED_STRING", "'('", "')'", "$accept", "file", "commands", "command", + "@1", "@2", "symbol_list_opt", "symbol_list", "symbol_prefix", "symbol", + "string_list", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, + 285, 286, 287, 288, 289, 290, 291, 292, 40, 41 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 40, 41, 42, 42, 43, 43, 43, 43, 43, + 43, 43, 43, 44, 43, 43, 43, 43, 43, 43, + 45, 43, 43, 43, 43, 43, 43, 43, 43, 43, + 43, 43, 43, 43, 43, 43, 43, 43, 43, 43, + 43, 43, 43, 46, 46, 47, 47, 47, 47, 48, + 49, 50, 50 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 1, 0, 2, 2, 2, 2, 2, 4, + 1, 2, 2, 0, 3, 2, 2, 1, 2, 2, + 0, 3, 2, 1, 2, 2, 2, 1, 1, 2, + 1, 1, 2, 2, 2, 2, 1, 2, 2, 1, + 4, 3, 2, 0, 1, 1, 1, 2, 2, 3, + 1, 0, 2 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 3, 0, 0, 0, 0, 0, 10, 0, 0, 13, + 0, 0, 17, 0, 20, 51, 23, 0, 51, 27, + 28, 0, 30, 31, 0, 0, 0, 0, 36, 0, + 0, 39, 0, 0, 0, 2, 3, 5, 6, 7, + 8, 0, 11, 12, 43, 15, 16, 18, 19, 43, + 51, 22, 24, 25, 26, 29, 32, 33, 34, 35, + 37, 38, 0, 42, 1, 4, 0, 50, 0, 14, + 44, 46, 45, 21, 52, 41, 9, 0, 48, 47, + 40, 49 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 34, 35, 36, 44, 49, 69, 70, 71, 72, + 51 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -20 +static const yytype_int8 yypact[] = +{ + -3, -1, 1, 2, 4, 5, -20, 6, 8, -20, + 9, 10, 11, 12, -20, 13, 14, 16, 13, -20, + -20, 17, -20, -20, 18, 20, 21, 22, -20, 23, + 25, -20, 26, 27, 38, -20, -3, -20, -20, -20, + -20, 28, -20, -20, -2, -20, -20, -20, -20, -2, + 13, -20, -20, -20, -20, -20, -20, -20, -20, -20, + -20, -20, 30, -20, -20, -20, 31, -20, 32, -20, + -2, -20, -20, -20, -20, 33, -20, 3, -20, -20, + -20, -20 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -20, -20, 34, -20, -20, -20, 24, -20, -19, -16, + 15 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -1 +static const yytype_uint8 yytable[] = +{ + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, + 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32, 33, 54, 67, 37, 68, 38, 64, 39, + 40, 41, 81, 42, 43, 45, 46, 47, 48, 50, + 52, 78, 53, 55, 79, 56, 57, 58, 59, 0, + 60, 61, 62, 63, 66, 74, 75, 76, 77, 80, + 65, 0, 0, 73 +}; + +static const yytype_int8 yycheck[] = +{ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, + 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, + 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, + 33, 34, 35, 18, 36, 36, 38, 36, 0, 37, + 36, 36, 39, 37, 36, 36, 36, 36, 36, 36, + 36, 70, 36, 36, 70, 37, 36, 36, 36, -1, + 37, 36, 36, 36, 36, 50, 36, 36, 36, 36, + 36, -1, -1, 49 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 41, 42, 43, 36, 36, 37, + 36, 36, 37, 36, 44, 36, 36, 36, 36, 45, + 36, 50, 36, 36, 50, 36, 37, 36, 36, 36, + 37, 36, 36, 36, 0, 42, 36, 36, 38, 46, + 47, 48, 49, 46, 50, 36, 36, 36, 48, 49, + 36, 39 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 5: +#line 158 "nlmheader.y" + { + check_procedure = (yyvsp[(2) - (2)].string); + } + break; + + case 6: +#line 162 "nlmheader.y" + { + nlmheader_warn (_("CODESTART is not implemented; sorry"), -1); + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 7: +#line 167 "nlmheader.y" + { + int len; + + strncpy (copyright_hdr->stamp, "CoPyRiGhT=", 10); + len = strlen ((yyvsp[(2) - (2)].string)); + if (len >= NLM_MAX_COPYRIGHT_MESSAGE_LENGTH) + { + nlmheader_warn (_("copyright string is too long"), + NLM_MAX_COPYRIGHT_MESSAGE_LENGTH - 1); + len = NLM_MAX_COPYRIGHT_MESSAGE_LENGTH - 1; + } + copyright_hdr->copyrightMessageLength = len; + strncpy (copyright_hdr->copyrightMessage, (yyvsp[(2) - (2)].string), len); + copyright_hdr->copyrightMessage[len] = '\0'; + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 8: +#line 184 "nlmheader.y" + { + custom_file = (yyvsp[(2) - (2)].string); + } + break; + + case 9: +#line 188 "nlmheader.y" + { + /* We don't set the version stamp here, because we use the + version stamp to detect whether the required VERSION + keyword was given. */ + version_hdr->month = nlmlex_get_number ((yyvsp[(2) - (4)].string)); + version_hdr->day = nlmlex_get_number ((yyvsp[(3) - (4)].string)); + version_hdr->year = nlmlex_get_number ((yyvsp[(4) - (4)].string)); + free ((yyvsp[(2) - (4)].string)); + free ((yyvsp[(3) - (4)].string)); + free ((yyvsp[(4) - (4)].string)); + if (version_hdr->month < 1 || version_hdr->month > 12) + nlmheader_warn (_("illegal month"), -1); + if (version_hdr->day < 1 || version_hdr->day > 31) + nlmheader_warn (_("illegal day"), -1); + if (version_hdr->year < 1900 || version_hdr->year > 3000) + nlmheader_warn (_("illegal year"), -1); + } + break; + + case 10: +#line 206 "nlmheader.y" + { + debug_info = TRUE; + } + break; + + case 11: +#line 210 "nlmheader.y" + { + int len; + + len = strlen ((yyvsp[(2) - (2)].string)); + if (len > NLM_MAX_DESCRIPTION_LENGTH) + { + nlmheader_warn (_("description string is too long"), + NLM_MAX_DESCRIPTION_LENGTH); + len = NLM_MAX_DESCRIPTION_LENGTH; + } + var_hdr->descriptionLength = len; + strncpy (var_hdr->descriptionText, (yyvsp[(2) - (2)].string), len); + var_hdr->descriptionText[len] = '\0'; + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 12: +#line 226 "nlmheader.y" + { + exit_procedure = (yyvsp[(2) - (2)].string); + } + break; + + case 13: +#line 230 "nlmheader.y" + { + symbol_prefix = NULL; + } + break; + + case 14: +#line 234 "nlmheader.y" + { + export_symbols = string_list_append (export_symbols, (yyvsp[(3) - (3)].list)); + } + break; + + case 15: +#line 238 "nlmheader.y" + { + fixed_hdr->flags |= nlmlex_get_number ((yyvsp[(2) - (2)].string)); + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 16: +#line 243 "nlmheader.y" + { + fixed_hdr->flags &=~ nlmlex_get_number ((yyvsp[(2) - (2)].string)); + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 17: +#line 248 "nlmheader.y" + { + map_file = ""; + full_map = TRUE; + } + break; + + case 18: +#line 253 "nlmheader.y" + { + map_file = (yyvsp[(2) - (2)].string); + full_map = TRUE; + } + break; + + case 19: +#line 258 "nlmheader.y" + { + help_file = (yyvsp[(2) - (2)].string); + } + break; + + case 20: +#line 262 "nlmheader.y" + { + symbol_prefix = NULL; + } + break; + + case 21: +#line 266 "nlmheader.y" + { + import_symbols = string_list_append (import_symbols, (yyvsp[(3) - (3)].list)); + } + break; + + case 22: +#line 270 "nlmheader.y" + { + input_files = string_list_append (input_files, (yyvsp[(2) - (2)].list)); + } + break; + + case 23: +#line 274 "nlmheader.y" + { + map_file = ""; + } + break; + + case 24: +#line 278 "nlmheader.y" + { + map_file = (yyvsp[(2) - (2)].string); + } + break; + + case 25: +#line 282 "nlmheader.y" + { + message_file = (yyvsp[(2) - (2)].string); + } + break; + + case 26: +#line 286 "nlmheader.y" + { + modules = string_list_append (modules, (yyvsp[(2) - (2)].list)); + } + break; + + case 27: +#line 290 "nlmheader.y" + { + fixed_hdr->flags |= 0x2; + } + break; + + case 28: +#line 294 "nlmheader.y" + { + fixed_hdr->flags |= 0x10; + } + break; + + case 29: +#line 298 "nlmheader.y" + { + if (output_file == NULL) + output_file = (yyvsp[(2) - (2)].string); + else + nlmheader_warn (_("ignoring duplicate OUTPUT statement"), -1); + } + break; + + case 30: +#line 305 "nlmheader.y" + { + fixed_hdr->flags |= 0x8; + } + break; + + case 31: +#line 309 "nlmheader.y" + { + fixed_hdr->flags |= 0x1; + } + break; + + case 32: +#line 313 "nlmheader.y" + { + int len; + + len = strlen ((yyvsp[(2) - (2)].string)); + if (len >= NLM_MAX_SCREEN_NAME_LENGTH) + { + nlmheader_warn (_("screen name is too long"), + NLM_MAX_SCREEN_NAME_LENGTH); + len = NLM_MAX_SCREEN_NAME_LENGTH; + } + var_hdr->screenNameLength = len; + strncpy (var_hdr->screenName, (yyvsp[(2) - (2)].string), len); + var_hdr->screenName[NLM_MAX_SCREEN_NAME_LENGTH] = '\0'; + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 33: +#line 329 "nlmheader.y" + { + sharelib_file = (yyvsp[(2) - (2)].string); + } + break; + + case 34: +#line 333 "nlmheader.y" + { + var_hdr->stackSize = nlmlex_get_number ((yyvsp[(2) - (2)].string)); + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 35: +#line 338 "nlmheader.y" + { + start_procedure = (yyvsp[(2) - (2)].string); + } + break; + + case 36: +#line 342 "nlmheader.y" + { + fixed_hdr->flags |= 0x4; + } + break; + + case 37: +#line 346 "nlmheader.y" + { + int len; + + len = strlen ((yyvsp[(2) - (2)].string)); + if (len >= NLM_MAX_THREAD_NAME_LENGTH) + { + nlmheader_warn (_("thread name is too long"), + NLM_MAX_THREAD_NAME_LENGTH); + len = NLM_MAX_THREAD_NAME_LENGTH; + } + var_hdr->threadNameLength = len; + strncpy (var_hdr->threadName, (yyvsp[(2) - (2)].string), len); + var_hdr->threadName[len] = '\0'; + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 38: +#line 362 "nlmheader.y" + { + fixed_hdr->moduleType = nlmlex_get_number ((yyvsp[(2) - (2)].string)); + free ((yyvsp[(2) - (2)].string)); + } + break; + + case 39: +#line 367 "nlmheader.y" + { + verbose = TRUE; + } + break; + + case 40: +#line 371 "nlmheader.y" + { + long val; + + strncpy (version_hdr->stamp, "VeRsIoN#", 8); + version_hdr->majorVersion = nlmlex_get_number ((yyvsp[(2) - (4)].string)); + val = nlmlex_get_number ((yyvsp[(3) - (4)].string)); + if (val < 0 || val > 99) + nlmheader_warn (_("illegal minor version number (must be between 0 and 99)"), + -1); + else + version_hdr->minorVersion = val; + val = nlmlex_get_number ((yyvsp[(4) - (4)].string)); + if (val < 0) + nlmheader_warn (_("illegal revision number (must be between 0 and 26)"), + -1); + else if (val > 26) + version_hdr->revision = 0; + else + version_hdr->revision = val; + free ((yyvsp[(2) - (4)].string)); + free ((yyvsp[(3) - (4)].string)); + free ((yyvsp[(4) - (4)].string)); + } + break; + + case 41: +#line 395 "nlmheader.y" + { + long val; + + strncpy (version_hdr->stamp, "VeRsIoN#", 8); + version_hdr->majorVersion = nlmlex_get_number ((yyvsp[(2) - (3)].string)); + val = nlmlex_get_number ((yyvsp[(3) - (3)].string)); + if (val < 0 || val > 99) + nlmheader_warn (_("illegal minor version number (must be between 0 and 99)"), + -1); + else + version_hdr->minorVersion = val; + version_hdr->revision = 0; + free ((yyvsp[(2) - (3)].string)); + free ((yyvsp[(3) - (3)].string)); + } + break; + + case 42: +#line 411 "nlmheader.y" + { + rpc_file = (yyvsp[(2) - (2)].string); + } + break; + + case 43: +#line 420 "nlmheader.y" + { + (yyval.list) = NULL; + } + break; + + case 44: +#line 424 "nlmheader.y" + { + (yyval.list) = (yyvsp[(1) - (1)].list); + } + break; + + case 45: +#line 435 "nlmheader.y" + { + (yyval.list) = string_list_cons ((yyvsp[(1) - (1)].string), NULL); + } + break; + + case 46: +#line 439 "nlmheader.y" + { + (yyval.list) = NULL; + } + break; + + case 47: +#line 443 "nlmheader.y" + { + (yyval.list) = string_list_append1 ((yyvsp[(1) - (2)].list), (yyvsp[(2) - (2)].string)); + } + break; + + case 48: +#line 447 "nlmheader.y" + { + (yyval.list) = (yyvsp[(1) - (2)].list); + } + break; + + case 49: +#line 456 "nlmheader.y" + { + if (symbol_prefix != NULL) + free (symbol_prefix); + symbol_prefix = (yyvsp[(2) - (3)].string); + } + break; + + case 50: +#line 467 "nlmheader.y" + { + if (symbol_prefix == NULL) + (yyval.string) = (yyvsp[(1) - (1)].string); + else + { + (yyval.string) = xmalloc (strlen (symbol_prefix) + strlen ((yyvsp[(1) - (1)].string)) + 2); + sprintf ((yyval.string), "%s@%s", symbol_prefix, (yyvsp[(1) - (1)].string)); + free ((yyvsp[(1) - (1)].string)); + } + } + break; + + case 51: +#line 483 "nlmheader.y" + { + (yyval.list) = NULL; + } + break; + + case 52: +#line 487 "nlmheader.y" + { + (yyval.list) = string_list_cons ((yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].list)); + } + break; + + +/* Line 1267 of yacc.c. */ +#line 2015 "nlmheader.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 492 "nlmheader.y" + + +/* If strerror is just a macro, we want to use the one from libiberty + since it will handle undefined values. */ +#undef strerror +extern char *strerror PARAMS ((int)); + +/* The lexer is simple, too simple for flex. Keywords are only + recognized at the start of lines. Everything else must be an + argument. A comma is treated as whitespace. */ + +/* The states the lexer can be in. */ + +enum lex_state +{ + /* At the beginning of a line. */ + BEGINNING_OF_LINE, + /* In the middle of a line. */ + IN_LINE +}; + +/* We need to keep a stack of files to handle file inclusion. */ + +struct input +{ + /* The file to read from. */ + FILE *file; + /* The name of the file. */ + char *name; + /* The current line number. */ + int lineno; + /* The current state. */ + enum lex_state state; + /* The next file on the stack. */ + struct input *next; +}; + +/* The current input file. */ + +static struct input current; + +/* The character which introduces comments. */ +#define COMMENT_CHAR '#' + +/* Start the lexer going on the main input file. */ + +bfd_boolean +nlmlex_file (const char *name) +{ + current.next = NULL; + return nlmlex_file_open (name); +} + +/* Start the lexer going on a subsidiary input file. */ + +static void +nlmlex_file_push (const char *name) +{ + struct input *push; + + push = (struct input *) xmalloc (sizeof (struct input)); + *push = current; + if (nlmlex_file_open (name)) + current.next = push; + else + { + current = *push; + free (push); + } +} + +/* Start lexing from a file. */ + +static bfd_boolean +nlmlex_file_open (const char *name) +{ + current.file = fopen (name, "r"); + if (current.file == NULL) + { + fprintf (stderr, "%s:%s: %s\n", program_name, name, strerror (errno)); + ++parse_errors; + return FALSE; + } + current.name = xstrdup (name); + current.lineno = 1; + current.state = BEGINNING_OF_LINE; + return TRUE; +} + +/* Table used to turn keywords into tokens. */ + +struct keyword_tokens_struct +{ + const char *keyword; + int token; +}; + +static struct keyword_tokens_struct keyword_tokens[] = +{ + { "CHECK", CHECK }, + { "CODESTART", CODESTART }, + { "COPYRIGHT", COPYRIGHT }, + { "CUSTOM", CUSTOM }, + { "DATE", DATE }, + { "DEBUG", DEBUG }, + { "DESCRIPTION", DESCRIPTION }, + { "EXIT", EXIT }, + { "EXPORT", EXPORT }, + { "FLAG_ON", FLAG_ON }, + { "FLAG_OFF", FLAG_OFF }, + { "FULLMAP", FULLMAP }, + { "HELP", HELP }, + { "IMPORT", IMPORT }, + { "INPUT", INPUT }, + { "MAP", MAP }, + { "MESSAGES", MESSAGES }, + { "MODULE", MODULE }, + { "MULTIPLE", MULTIPLE }, + { "OS_DOMAIN", OS_DOMAIN }, + { "OUTPUT", OUTPUT }, + { "PSEUDOPREEMPTION", PSEUDOPREEMPTION }, + { "REENTRANT", REENTRANT }, + { "SCREENNAME", SCREENNAME }, + { "SHARELIB", SHARELIB }, + { "STACK", STACK }, + { "STACKSIZE", STACK }, + { "START", START }, + { "SYNCHRONIZE", SYNCHRONIZE }, + { "THREADNAME", THREADNAME }, + { "TYPE", TYPE }, + { "VERBOSE", VERBOSE }, + { "VERSION", VERSIONK }, + { "XDCDATA", XDCDATA } +}; + +#define KEYWORD_COUNT (sizeof (keyword_tokens) / sizeof (keyword_tokens[0])) + +/* The lexer accumulates strings in these variables. */ +static char *lex_buf; +static int lex_size; +static int lex_pos; + +/* Start accumulating strings into the buffer. */ +#define BUF_INIT() \ + ((void) (lex_buf != NULL ? lex_pos = 0 : nlmlex_buf_init ())) + +static int +nlmlex_buf_init (void) +{ + lex_size = 10; + lex_buf = xmalloc (lex_size + 1); + lex_pos = 0; + return 0; +} + +/* Finish a string in the buffer. */ +#define BUF_FINISH() ((void) (lex_buf[lex_pos] = '\0')) + +/* Accumulate a character into the buffer. */ +#define BUF_ADD(c) \ + ((void) (lex_pos < lex_size \ + ? lex_buf[lex_pos++] = (c) \ + : nlmlex_buf_add (c))) + +static char +nlmlex_buf_add (int c) +{ + if (lex_pos >= lex_size) + { + lex_size *= 2; + lex_buf = xrealloc (lex_buf, lex_size + 1); + } + + return lex_buf[lex_pos++] = c; +} + +/* The lexer proper. This is called by the bison generated parsing + code. */ + +static int +yylex (void) +{ + int c; + +tail_recurse: + + c = getc (current.file); + + /* Commas are treated as whitespace characters. */ + while (ISSPACE (c) || c == ',') + { + current.state = IN_LINE; + if (c == '\n') + { + ++current.lineno; + current.state = BEGINNING_OF_LINE; + } + c = getc (current.file); + } + + /* At the end of the file we either pop to the previous file or + finish up. */ + if (c == EOF) + { + fclose (current.file); + free (current.name); + if (current.next == NULL) + return 0; + else + { + struct input *next; + + next = current.next; + current = *next; + free (next); + goto tail_recurse; + } + } + + /* A comment character always means to drop everything until the + next newline. */ + if (c == COMMENT_CHAR) + { + do + { + c = getc (current.file); + } + while (c != '\n'); + ++current.lineno; + current.state = BEGINNING_OF_LINE; + goto tail_recurse; + } + + /* An '@' introduces an include file. */ + if (c == '@') + { + do + { + c = getc (current.file); + if (c == '\n') + ++current.lineno; + } + while (ISSPACE (c)); + BUF_INIT (); + while (! ISSPACE (c) && c != EOF) + { + BUF_ADD (c); + c = getc (current.file); + } + BUF_FINISH (); + + ungetc (c, current.file); + + nlmlex_file_push (lex_buf); + goto tail_recurse; + } + + /* A non-space character at the start of a line must be the start of + a keyword. */ + if (current.state == BEGINNING_OF_LINE) + { + BUF_INIT (); + while (ISALNUM (c) || c == '_') + { + BUF_ADD (TOUPPER (c)); + c = getc (current.file); + } + BUF_FINISH (); + + if (c != EOF && ! ISSPACE (c) && c != ',') + { + nlmheader_identify (); + fprintf (stderr, _("%s:%d: illegal character in keyword: %c\n"), + current.name, current.lineno, c); + } + else + { + unsigned int i; + + for (i = 0; i < KEYWORD_COUNT; i++) + { + if (lex_buf[0] == keyword_tokens[i].keyword[0] + && strcmp (lex_buf, keyword_tokens[i].keyword) == 0) + { + /* Pushing back the final whitespace avoids worrying + about \n here. */ + ungetc (c, current.file); + current.state = IN_LINE; + return keyword_tokens[i].token; + } + } + + nlmheader_identify (); + fprintf (stderr, _("%s:%d: unrecognized keyword: %s\n"), + current.name, current.lineno, lex_buf); + } + + ++parse_errors; + /* Treat the rest of this line as a comment. */ + ungetc (COMMENT_CHAR, current.file); + goto tail_recurse; + } + + /* Parentheses just represent themselves. */ + if (c == '(' || c == ')') + return c; + + /* Handle quoted strings. */ + if (c == '"' || c == '\'') + { + int quote; + int start_lineno; + + quote = c; + start_lineno = current.lineno; + + c = getc (current.file); + BUF_INIT (); + while (c != quote && c != EOF) + { + BUF_ADD (c); + if (c == '\n') + ++current.lineno; + c = getc (current.file); + } + BUF_FINISH (); + + if (c == EOF) + { + nlmheader_identify (); + fprintf (stderr, _("%s:%d: end of file in quoted string\n"), + current.name, start_lineno); + ++parse_errors; + } + + /* FIXME: Possible memory leak. */ + yylval.string = xstrdup (lex_buf); + return QUOTED_STRING; + } + + /* Gather a generic argument. */ + BUF_INIT (); + while (! ISSPACE (c) + && c != ',' + && c != COMMENT_CHAR + && c != '(' + && c != ')') + { + BUF_ADD (c); + c = getc (current.file); + } + BUF_FINISH (); + + ungetc (c, current.file); + + /* FIXME: Possible memory leak. */ + yylval.string = xstrdup (lex_buf); + return STRING; +} + +/* Get a number from a string. */ + +static long +nlmlex_get_number (const char *s) +{ + long ret; + char *send; + + ret = strtol (s, &send, 10); + if (*send != '\0') + nlmheader_warn (_("bad number"), -1); + return ret; +} + +/* Prefix the nlmconv warnings with a note as to where they come from. + We don't use program_name on every warning, because then some + versions of the emacs next-error function can't recognize the line + number. */ + +static void +nlmheader_identify (void) +{ + static int done; + + if (! done) + { + fprintf (stderr, _("%s: problems in NLM command language input:\n"), + program_name); + done = 1; + } +} + +/* Issue a warning. */ + +static void +nlmheader_warn (const char *s, int imax) +{ + nlmheader_identify (); + fprintf (stderr, "%s:%d: %s", current.name, current.lineno, s); + if (imax != -1) + fprintf (stderr, " (max %d)", imax); + fprintf (stderr, "\n"); +} + +/* Report an error. */ + +static void +nlmheader_error (const char *s) +{ + nlmheader_warn (s, -1); + ++parse_errors; +} + +/* Add a string to a string list. */ + +static struct string_list * +string_list_cons (char *s, struct string_list *l) +{ + struct string_list *ret; + + ret = (struct string_list *) xmalloc (sizeof (struct string_list)); + ret->next = l; + ret->string = s; + return ret; +} + +/* Append a string list to another string list. */ + +static struct string_list * +string_list_append (struct string_list *l1, struct string_list *l2) +{ + register struct string_list **pp; + + for (pp = &l1; *pp != NULL; pp = &(*pp)->next) + ; + *pp = l2; + return l1; +} + +/* Append a string to a string list. */ + +static struct string_list * +string_list_append1 (struct string_list *l, char *s) +{ + struct string_list *n; + register struct string_list **pp; + + n = (struct string_list *) xmalloc (sizeof (struct string_list)); + n->next = NULL; + n->string = s; + for (pp = &l; *pp != NULL; pp = &(*pp)->next) + ; + *pp = n; + return l; +} + +/* Duplicate a string in memory. */ + +static char * +xstrdup (const char *s) +{ + unsigned long len; + char *ret; + + len = strlen (s); + ret = xmalloc (len + 1); + strcpy (ret, s); + return ret; +} + diff --git a/binutils/nlmheader.h b/binutils/nlmheader.h new file mode 100644 index 0000000..fe2e40b --- /dev/null +++ b/binutils/nlmheader.h @@ -0,0 +1,135 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + CHECK = 258, + CODESTART = 259, + COPYRIGHT = 260, + CUSTOM = 261, + DATE = 262, + DEBUG = 263, + DESCRIPTION = 264, + EXIT = 265, + EXPORT = 266, + FLAG_ON = 267, + FLAG_OFF = 268, + FULLMAP = 269, + HELP = 270, + IMPORT = 271, + INPUT = 272, + MAP = 273, + MESSAGES = 274, + MODULE = 275, + MULTIPLE = 276, + OS_DOMAIN = 277, + OUTPUT = 278, + PSEUDOPREEMPTION = 279, + REENTRANT = 280, + SCREENNAME = 281, + SHARELIB = 282, + STACK = 283, + START = 284, + SYNCHRONIZE = 285, + THREADNAME = 286, + TYPE = 287, + VERBOSE = 288, + VERSIONK = 289, + XDCDATA = 290, + STRING = 291, + QUOTED_STRING = 292 + }; +#endif +/* Tokens. */ +#define CHECK 258 +#define CODESTART 259 +#define COPYRIGHT 260 +#define CUSTOM 261 +#define DATE 262 +#define DEBUG 263 +#define DESCRIPTION 264 +#define EXIT 265 +#define EXPORT 266 +#define FLAG_ON 267 +#define FLAG_OFF 268 +#define FULLMAP 269 +#define HELP 270 +#define IMPORT 271 +#define INPUT 272 +#define MAP 273 +#define MESSAGES 274 +#define MODULE 275 +#define MULTIPLE 276 +#define OS_DOMAIN 277 +#define OUTPUT 278 +#define PSEUDOPREEMPTION 279 +#define REENTRANT 280 +#define SCREENNAME 281 +#define SHARELIB 282 +#define STACK 283 +#define START 284 +#define SYNCHRONIZE 285 +#define THREADNAME 286 +#define TYPE 287 +#define VERBOSE 288 +#define VERSIONK 289 +#define XDCDATA 290 +#define STRING 291 +#define QUOTED_STRING 292 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 113 "nlmheader.y" +{ + char *string; + struct string_list *list; +} +/* Line 1529 of yacc.c. */ +#line 128 "nlmheader.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/rcparse.c b/binutils/rcparse.c new file mode 100644 index 0000000..5b87727 --- /dev/null +++ b/binutils/rcparse.c @@ -0,0 +1,4597 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + BEG = 258, + END = 259, + ACCELERATORS = 260, + VIRTKEY = 261, + ASCII = 262, + NOINVERT = 263, + SHIFT = 264, + CONTROL = 265, + ALT = 266, + BITMAP = 267, + CURSOR = 268, + DIALOG = 269, + DIALOGEX = 270, + EXSTYLE = 271, + CAPTION = 272, + CLASS = 273, + STYLE = 274, + AUTO3STATE = 275, + AUTOCHECKBOX = 276, + AUTORADIOBUTTON = 277, + CHECKBOX = 278, + COMBOBOX = 279, + CTEXT = 280, + DEFPUSHBUTTON = 281, + EDITTEXT = 282, + GROUPBOX = 283, + LISTBOX = 284, + LTEXT = 285, + PUSHBOX = 286, + PUSHBUTTON = 287, + RADIOBUTTON = 288, + RTEXT = 289, + SCROLLBAR = 290, + STATE3 = 291, + USERBUTTON = 292, + BEDIT = 293, + HEDIT = 294, + IEDIT = 295, + FONT = 296, + ICON = 297, + ANICURSOR = 298, + ANIICON = 299, + DLGINCLUDE = 300, + DLGINIT = 301, + FONTDIR = 302, + HTML = 303, + MANIFEST = 304, + PLUGPLAY = 305, + VXD = 306, + TOOLBAR = 307, + BUTTON = 308, + LANGUAGE = 309, + CHARACTERISTICS = 310, + VERSIONK = 311, + MENU = 312, + MENUEX = 313, + MENUITEM = 314, + SEPARATOR = 315, + POPUP = 316, + CHECKED = 317, + GRAYED = 318, + HELP = 319, + INACTIVE = 320, + MENUBARBREAK = 321, + MENUBREAK = 322, + MESSAGETABLE = 323, + RCDATA = 324, + STRINGTABLE = 325, + VERSIONINFO = 326, + FILEVERSION = 327, + PRODUCTVERSION = 328, + FILEFLAGSMASK = 329, + FILEFLAGS = 330, + FILEOS = 331, + FILETYPE = 332, + FILESUBTYPE = 333, + BLOCKSTRINGFILEINFO = 334, + BLOCKVARFILEINFO = 335, + VALUE = 336, + BLOCK = 337, + MOVEABLE = 338, + FIXED = 339, + PURE = 340, + IMPURE = 341, + PRELOAD = 342, + LOADONCALL = 343, + DISCARDABLE = 344, + NOT = 345, + QUOTEDUNISTRING = 346, + QUOTEDSTRING = 347, + STRING = 348, + NUMBER = 349, + SIZEDUNISTRING = 350, + SIZEDSTRING = 351, + IGNORED_TOKEN = 352, + NEG = 353 + }; +#endif +/* Tokens. */ +#define BEG 258 +#define END 259 +#define ACCELERATORS 260 +#define VIRTKEY 261 +#define ASCII 262 +#define NOINVERT 263 +#define SHIFT 264 +#define CONTROL 265 +#define ALT 266 +#define BITMAP 267 +#define CURSOR 268 +#define DIALOG 269 +#define DIALOGEX 270 +#define EXSTYLE 271 +#define CAPTION 272 +#define CLASS 273 +#define STYLE 274 +#define AUTO3STATE 275 +#define AUTOCHECKBOX 276 +#define AUTORADIOBUTTON 277 +#define CHECKBOX 278 +#define COMBOBOX 279 +#define CTEXT 280 +#define DEFPUSHBUTTON 281 +#define EDITTEXT 282 +#define GROUPBOX 283 +#define LISTBOX 284 +#define LTEXT 285 +#define PUSHBOX 286 +#define PUSHBUTTON 287 +#define RADIOBUTTON 288 +#define RTEXT 289 +#define SCROLLBAR 290 +#define STATE3 291 +#define USERBUTTON 292 +#define BEDIT 293 +#define HEDIT 294 +#define IEDIT 295 +#define FONT 296 +#define ICON 297 +#define ANICURSOR 298 +#define ANIICON 299 +#define DLGINCLUDE 300 +#define DLGINIT 301 +#define FONTDIR 302 +#define HTML 303 +#define MANIFEST 304 +#define PLUGPLAY 305 +#define VXD 306 +#define TOOLBAR 307 +#define BUTTON 308 +#define LANGUAGE 309 +#define CHARACTERISTICS 310 +#define VERSIONK 311 +#define MENU 312 +#define MENUEX 313 +#define MENUITEM 314 +#define SEPARATOR 315 +#define POPUP 316 +#define CHECKED 317 +#define GRAYED 318 +#define HELP 319 +#define INACTIVE 320 +#define MENUBARBREAK 321 +#define MENUBREAK 322 +#define MESSAGETABLE 323 +#define RCDATA 324 +#define STRINGTABLE 325 +#define VERSIONINFO 326 +#define FILEVERSION 327 +#define PRODUCTVERSION 328 +#define FILEFLAGSMASK 329 +#define FILEFLAGS 330 +#define FILEOS 331 +#define FILETYPE 332 +#define FILESUBTYPE 333 +#define BLOCKSTRINGFILEINFO 334 +#define BLOCKVARFILEINFO 335 +#define VALUE 336 +#define BLOCK 337 +#define MOVEABLE 338 +#define FIXED 339 +#define PURE 340 +#define IMPURE 341 +#define PRELOAD 342 +#define LOADONCALL 343 +#define DISCARDABLE 344 +#define NOT 345 +#define QUOTEDUNISTRING 346 +#define QUOTEDSTRING 347 +#define STRING 348 +#define NUMBER 349 +#define SIZEDUNISTRING 350 +#define SIZEDSTRING 351 +#define IGNORED_TOKEN 352 +#define NEG 353 + + + + +/* Copy the first part of user declarations. */ +#line 1 "rcparse.y" + /* rcparse.y -- parser for Windows rc files + Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2008 + Free Software Foundation, Inc. + Written by Ian Lance Taylor, Cygnus Support. + Extended by Kai Tietz, Onevision. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA + 02110-1301, USA. */ + + +/* This is a parser for Windows rc files. It is based on the parser + by Gunther Ebert <gunther.ebert@ixos-leipzig.de>. */ + +#include "sysdep.h" +#include "bfd.h" +#include "bucomm.h" +#include "libiberty.h" +#include "windres.h" +#include "safe-ctype.h" + +/* The current language. */ + +static unsigned short language; + +/* The resource information during a sub statement. */ + +static rc_res_res_info sub_res_info; + +/* Dialog information. This is built by the nonterminals styles and + controls. */ + +static rc_dialog dialog; + +/* This is used when building a style. It is modified by the + nonterminal styleexpr. */ + +static unsigned long style; + +/* These are used when building a control. They are set before using + control_params. */ + +static rc_uint_type base_style; +static rc_uint_type default_style; +static rc_res_id class; +static rc_res_id res_text_field; +static unichar null_unichar; + +/* This is used for COMBOBOX, LISTBOX and EDITTEXT which + do not allow resource 'text' field in control definition. */ +static const rc_res_id res_null_text = { 1, {{0, &null_unichar}}}; + + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 69 "rcparse.y" +{ + rc_accelerator acc; + rc_accelerator *pacc; + rc_dialog_control *dialog_control; + rc_menuitem *menuitem; + struct + { + rc_rcdata_item *first; + rc_rcdata_item *last; + } rcdata; + rc_rcdata_item *rcdata_item; + rc_fixed_versioninfo *fixver; + rc_ver_info *verinfo; + rc_ver_stringinfo *verstring; + rc_ver_varinfo *vervar; + rc_toolbar_item *toobar_item; + rc_res_id id; + rc_res_res_info res_info; + struct + { + rc_uint_type on; + rc_uint_type off; + } memflags; + struct + { + rc_uint_type val; + /* Nonzero if this number was explicitly specified as long. */ + int dword; + } i; + rc_uint_type il; + rc_uint_type is; + const char *s; + struct + { + rc_uint_type length; + const char *s; + } ss; + unichar *uni; + struct + { + rc_uint_type length; + const unichar *s; + } suni; +} +/* Line 193 of yacc.c. */ +#line 404 "rcparse.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 417 "rcparse.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 2 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 835 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 112 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 99 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 270 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 515 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 353 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 105, 100, 2, + 110, 111, 103, 101, 108, 102, 2, 104, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 109, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 99, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 98, 2, 106, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, + 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, + 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, + 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, + 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, + 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + 95, 96, 97, 107 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint16 yyprhs[] = +{ + 0, 0, 3, 4, 7, 10, 13, 16, 19, 22, + 25, 28, 31, 34, 37, 40, 43, 46, 49, 56, + 57, 60, 63, 68, 70, 72, 74, 78, 81, 83, + 85, 87, 89, 91, 93, 98, 103, 104, 118, 119, + 133, 134, 149, 150, 154, 155, 159, 163, 167, 171, + 175, 181, 188, 196, 205, 209, 213, 218, 222, 223, + 226, 227, 232, 233, 238, 239, 244, 245, 250, 251, + 256, 257, 261, 273, 286, 287, 292, 293, 298, 299, + 303, 304, 309, 310, 315, 322, 331, 342, 354, 355, + 360, 361, 365, 366, 371, 372, 377, 378, 383, 384, + 389, 390, 395, 396, 400, 401, 406, 407, 423, 430, + 439, 449, 452, 453, 456, 458, 460, 461, 465, 466, + 470, 471, 475, 476, 480, 485, 490, 494, 501, 502, + 505, 510, 513, 520, 521, 525, 528, 530, 532, 534, + 536, 538, 540, 547, 548, 551, 554, 558, 564, 567, + 573, 580, 588, 598, 603, 604, 607, 608, 610, 612, + 614, 616, 620, 624, 628, 631, 632, 639, 640, 644, + 649, 652, 654, 656, 658, 660, 662, 664, 666, 668, + 670, 672, 679, 684, 693, 694, 698, 701, 708, 709, + 716, 723, 727, 731, 735, 739, 743, 744, 753, 761, + 762, 768, 769, 773, 775, 777, 779, 781, 784, 786, + 789, 790, 793, 797, 802, 806, 807, 810, 811, 814, + 816, 818, 820, 822, 824, 826, 828, 830, 832, 834, + 837, 839, 841, 843, 846, 848, 851, 853, 856, 860, + 865, 867, 871, 872, 874, 877, 879, 881, 885, 888, + 891, 895, 899, 903, 907, 911, 915, 919, 923, 926, + 928, 930, 934, 937, 941, 945, 949, 953, 957, 961, + 965 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int16 yyrhs[] = +{ + 113, 0, -1, -1, 113, 114, -1, 113, 120, -1, + 113, 121, -1, 113, 122, -1, 113, 162, -1, 113, + 163, -1, 113, 164, -1, 113, 165, -1, 113, 170, + -1, 113, 173, -1, 113, 178, -1, 113, 183, -1, + 113, 182, -1, 113, 185, -1, 113, 97, -1, 190, + 5, 193, 3, 115, 4, -1, -1, 115, 116, -1, + 117, 208, -1, 117, 208, 108, 118, -1, 92, -1, + 209, -1, 119, -1, 118, 108, 119, -1, 118, 119, + -1, 6, -1, 7, -1, 8, -1, 9, -1, 10, + -1, 11, -1, 190, 12, 195, 197, -1, 190, 13, + 194, 197, -1, -1, 190, 14, 195, 126, 209, 205, + 205, 205, 123, 127, 3, 128, 4, -1, -1, 190, + 15, 195, 126, 209, 205, 205, 205, 124, 127, 3, + 128, 4, -1, -1, 190, 15, 195, 126, 209, 205, + 205, 205, 205, 125, 127, 3, 128, 4, -1, -1, + 16, 109, 206, -1, -1, 127, 17, 198, -1, 127, + 18, 190, -1, 127, 19, 202, -1, 127, 16, 206, + -1, 127, 18, 198, -1, 127, 41, 206, 108, 198, + -1, 127, 41, 206, 108, 198, 205, -1, 127, 41, + 206, 108, 198, 205, 205, -1, 127, 41, 206, 108, + 198, 205, 205, 205, -1, 127, 57, 190, -1, 127, + 55, 206, -1, 127, 54, 206, 205, -1, 127, 56, + 206, -1, -1, 128, 129, -1, -1, 20, 153, 130, + 151, -1, -1, 21, 153, 131, 151, -1, -1, 22, + 153, 132, 151, -1, -1, 38, 153, 133, 151, -1, + -1, 23, 153, 134, 151, -1, -1, 24, 135, 151, + -1, 10, 153, 206, 152, 156, 205, 205, 205, 205, + 204, 155, -1, 10, 153, 206, 152, 156, 205, 205, + 205, 205, 205, 205, 155, -1, -1, 25, 153, 136, + 151, -1, -1, 26, 153, 137, 151, -1, -1, 27, + 138, 151, -1, -1, 28, 153, 139, 151, -1, -1, + 39, 153, 140, 151, -1, 42, 192, 206, 205, 205, + 155, -1, 42, 192, 206, 205, 205, 205, 205, 155, + -1, 42, 192, 206, 205, 205, 205, 205, 158, 204, + 155, -1, 42, 192, 206, 205, 205, 205, 205, 158, + 205, 205, 155, -1, -1, 40, 153, 141, 151, -1, + -1, 29, 142, 151, -1, -1, 30, 153, 143, 151, + -1, -1, 31, 153, 144, 151, -1, -1, 32, 153, + 145, 151, -1, -1, 33, 153, 146, 151, -1, -1, + 34, 153, 147, 151, -1, -1, 35, 148, 151, -1, + -1, 36, 153, 149, 151, -1, -1, 37, 192, 206, + 108, 206, 108, 206, 108, 206, 108, 206, 108, 150, + 202, 204, -1, 206, 205, 205, 205, 205, 155, -1, + 206, 205, 205, 205, 205, 160, 204, 155, -1, 206, + 205, 205, 205, 205, 160, 205, 205, 155, -1, 108, + 154, -1, -1, 154, 108, -1, 209, -1, 198, -1, + -1, 3, 174, 4, -1, -1, 108, 157, 202, -1, + -1, 108, 159, 202, -1, -1, 108, 161, 202, -1, + 190, 41, 194, 197, -1, 190, 42, 194, 197, -1, + 54, 206, 205, -1, 190, 57, 193, 3, 166, 4, + -1, -1, 166, 167, -1, 59, 198, 205, 168, -1, + 59, 60, -1, 61, 198, 168, 3, 166, 4, -1, + -1, 168, 108, 169, -1, 168, 169, -1, 62, -1, + 63, -1, 64, -1, 65, -1, 66, -1, 67, -1, + 190, 58, 193, 3, 171, 4, -1, -1, 171, 172, + -1, 59, 198, -1, 59, 198, 205, -1, 59, 198, + 205, 205, 204, -1, 59, 60, -1, 61, 198, 3, + 171, 4, -1, 61, 198, 205, 3, 171, 4, -1, + 61, 198, 205, 205, 3, 171, 4, -1, 61, 198, + 205, 205, 205, 204, 3, 171, 4, -1, 190, 68, + 195, 197, -1, -1, 175, 176, -1, -1, 177, -1, + 200, -1, 201, -1, 207, -1, 177, 108, 200, -1, + 177, 108, 201, -1, 177, 108, 207, -1, 177, 108, + -1, -1, 70, 193, 3, 179, 180, 4, -1, -1, + 180, 206, 198, -1, 180, 206, 108, 198, -1, 180, + 1, -1, 190, -1, 48, -1, 69, -1, 49, -1, + 50, -1, 51, -1, 45, -1, 46, -1, 43, -1, + 44, -1, 190, 181, 193, 3, 174, 4, -1, 190, + 181, 193, 197, -1, 190, 52, 193, 206, 205, 3, + 184, 4, -1, -1, 184, 53, 190, -1, 184, 60, + -1, 190, 71, 186, 3, 187, 4, -1, -1, 186, + 72, 206, 205, 205, 205, -1, 186, 73, 206, 205, + 205, 205, -1, 186, 74, 206, -1, 186, 75, 206, + -1, 186, 76, 206, -1, 186, 77, 206, -1, 186, + 78, 206, -1, -1, 187, 79, 3, 82, 3, 188, + 4, 4, -1, 187, 80, 3, 81, 198, 189, 4, + -1, -1, 188, 81, 198, 108, 198, -1, -1, 189, + 205, 205, -1, 209, -1, 191, -1, 199, -1, 93, + -1, 209, 108, -1, 191, -1, 191, 108, -1, -1, + 193, 196, -1, 193, 55, 206, -1, 193, 54, 206, + 205, -1, 193, 56, 206, -1, -1, 194, 196, -1, + -1, 195, 196, -1, 83, -1, 84, -1, 85, -1, + 86, -1, 87, -1, 88, -1, 89, -1, 92, -1, + 93, -1, 199, -1, 198, 199, -1, 91, -1, 92, + -1, 96, -1, 200, 96, -1, 95, -1, 201, 95, + -1, 203, -1, 90, 203, -1, 202, 98, 203, -1, + 202, 98, 90, 203, -1, 94, -1, 110, 206, 111, + -1, -1, 205, -1, 108, 206, -1, 207, -1, 94, + -1, 110, 207, 111, -1, 106, 207, -1, 102, 207, + -1, 207, 103, 207, -1, 207, 104, 207, -1, 207, + 105, 207, -1, 207, 101, 207, -1, 207, 102, 207, + -1, 207, 100, 207, -1, 207, 99, 207, -1, 207, + 98, 207, -1, 108, 209, -1, 210, -1, 94, -1, + 110, 207, 111, -1, 106, 207, -1, 210, 103, 207, + -1, 210, 104, 207, -1, 210, 105, 207, -1, 210, + 101, 207, -1, 210, 102, 207, -1, 210, 100, 207, + -1, 210, 99, 207, -1, 210, 98, 207, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 177, 177, 179, 180, 181, 182, 183, 184, 185, + 186, 187, 188, 189, 190, 191, 192, 193, 199, 210, + 213, 234, 239, 251, 271, 281, 285, 290, 297, 301, + 306, 310, 314, 318, 327, 339, 353, 351, 378, 376, + 405, 403, 435, 438, 444, 446, 452, 456, 461, 465, + 469, 482, 497, 512, 527, 531, 535, 539, 545, 547, + 559, 558, 571, 570, 583, 582, 595, 594, 610, 609, + 622, 621, 635, 646, 656, 655, 668, 667, 680, 679, + 692, 691, 704, 703, 718, 723, 729, 735, 742, 741, + 757, 756, 769, 768, 781, 780, 792, 791, 804, 803, + 816, 815, 828, 827, 840, 839, 853, 851, 872, 883, + 894, 906, 917, 920, 924, 929, 939, 942, 952, 951, + 958, 957, 964, 963, 971, 983, 996, 1005, 1016, 1019, + 1036, 1040, 1044, 1052, 1055, 1059, 1066, 1070, 1074, 1078, + 1082, 1086, 1095, 1106, 1109, 1126, 1130, 1134, 1138, 1142, + 1146, 1150, 1154, 1164, 1177, 1177, 1189, 1193, 1200, 1208, + 1216, 1224, 1233, 1242, 1251, 1261, 1260, 1265, 1267, 1272, + 1277, 1285, 1289, 1294, 1299, 1304, 1309, 1314, 1319, 1324, + 1329, 1340, 1347, 1357, 1363, 1364, 1383, 1408, 1419, 1424, + 1430, 1436, 1441, 1446, 1451, 1456, 1471, 1474, 1478, 1486, + 1489, 1497, 1500, 1509, 1514, 1523, 1527, 1537, 1542, 1546, + 1557, 1563, 1569, 1574, 1579, 1590, 1595, 1607, 1612, 1624, + 1629, 1634, 1639, 1644, 1649, 1654, 1664, 1668, 1676, 1681, + 1696, 1700, 1709, 1713, 1725, 1729, 1751, 1755, 1759, 1763, + 1770, 1774, 1784, 1787, 1796, 1805, 1814, 1818, 1822, 1827, + 1832, 1837, 1842, 1847, 1852, 1857, 1862, 1867, 1878, 1887, + 1898, 1902, 1906, 1911, 1916, 1921, 1926, 1931, 1936, 1941, + 1946 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "BEG", "END", "ACCELERATORS", "VIRTKEY", + "ASCII", "NOINVERT", "SHIFT", "CONTROL", "ALT", "BITMAP", "CURSOR", + "DIALOG", "DIALOGEX", "EXSTYLE", "CAPTION", "CLASS", "STYLE", + "AUTO3STATE", "AUTOCHECKBOX", "AUTORADIOBUTTON", "CHECKBOX", "COMBOBOX", + "CTEXT", "DEFPUSHBUTTON", "EDITTEXT", "GROUPBOX", "LISTBOX", "LTEXT", + "PUSHBOX", "PUSHBUTTON", "RADIOBUTTON", "RTEXT", "SCROLLBAR", "STATE3", + "USERBUTTON", "BEDIT", "HEDIT", "IEDIT", "FONT", "ICON", "ANICURSOR", + "ANIICON", "DLGINCLUDE", "DLGINIT", "FONTDIR", "HTML", "MANIFEST", + "PLUGPLAY", "VXD", "TOOLBAR", "BUTTON", "LANGUAGE", "CHARACTERISTICS", + "VERSIONK", "MENU", "MENUEX", "MENUITEM", "SEPARATOR", "POPUP", + "CHECKED", "GRAYED", "HELP", "INACTIVE", "MENUBARBREAK", "MENUBREAK", + "MESSAGETABLE", "RCDATA", "STRINGTABLE", "VERSIONINFO", "FILEVERSION", + "PRODUCTVERSION", "FILEFLAGSMASK", "FILEFLAGS", "FILEOS", "FILETYPE", + "FILESUBTYPE", "BLOCKSTRINGFILEINFO", "BLOCKVARFILEINFO", "VALUE", + "BLOCK", "MOVEABLE", "FIXED", "PURE", "IMPURE", "PRELOAD", "LOADONCALL", + "DISCARDABLE", "NOT", "QUOTEDUNISTRING", "QUOTEDSTRING", "STRING", + "NUMBER", "SIZEDUNISTRING", "SIZEDSTRING", "IGNORED_TOKEN", "'|'", "'^'", + "'&'", "'+'", "'-'", "'*'", "'/'", "'%'", "'~'", "NEG", "','", "'='", + "'('", "')'", "$accept", "input", "accelerator", "acc_entries", + "acc_entry", "acc_event", "acc_options", "acc_option", "bitmap", + "cursor", "dialog", "@1", "@2", "@3", "exstyle", "styles", "controls", + "control", "@4", "@5", "@6", "@7", "@8", "@9", "@10", "@11", "@12", + "@13", "@14", "@15", "@16", "@17", "@18", "@19", "@20", "@21", "@22", + "@23", "@24", "control_params", "cresid", "optresidc", "resid", + "opt_control_data", "control_styleexpr", "@25", "icon_styleexpr", "@26", + "control_params_styleexpr", "@27", "font", "icon", "language", "menu", + "menuitems", "menuitem", "menuitem_flags", "menuitem_flag", "menuex", + "menuexitems", "menuexitem", "messagetable", "optrcdata_data", "@28", + "optrcdata_data_int", "rcdata_data", "stringtable", "@29", "string_data", + "rcdata_id", "user", "toolbar", "toolbar_data", "versioninfo", + "fixedverinfo", "verblocks", "vervals", "vertrans", "id", "resname", + "resref", "suboptions", "memflags_move_discard", "memflags_move", + "memflag", "file_name", "res_unicode_string_concat", + "res_unicode_string", "sizedstring", "sizedunistring", "styleexpr", + "parennumber", "optcnumexpr", "cnumexpr", "numexpr", "sizednumexpr", + "cposnumexpr", "posnumexpr", "sizedposnumexpr", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, + 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, + 295, 296, 297, 298, 299, 300, 301, 302, 303, 304, + 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, + 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, + 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, + 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, + 345, 346, 347, 348, 349, 350, 351, 352, 124, 94, + 38, 43, 45, 42, 47, 37, 126, 353, 44, 61, + 40, 41 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 112, 113, 113, 113, 113, 113, 113, 113, 113, + 113, 113, 113, 113, 113, 113, 113, 113, 114, 115, + 115, 116, 116, 117, 117, 118, 118, 118, 119, 119, + 119, 119, 119, 119, 120, 121, 123, 122, 124, 122, + 125, 122, 126, 126, 127, 127, 127, 127, 127, 127, + 127, 127, 127, 127, 127, 127, 127, 127, 128, 128, + 130, 129, 131, 129, 132, 129, 133, 129, 134, 129, + 135, 129, 129, 129, 136, 129, 137, 129, 138, 129, + 139, 129, 140, 129, 129, 129, 129, 129, 141, 129, + 142, 129, 143, 129, 144, 129, 145, 129, 146, 129, + 147, 129, 148, 129, 149, 129, 150, 129, 151, 151, + 151, 152, 153, 153, 154, 154, 155, 155, 157, 156, + 159, 158, 161, 160, 162, 163, 164, 165, 166, 166, + 167, 167, 167, 168, 168, 168, 169, 169, 169, 169, + 169, 169, 170, 171, 171, 172, 172, 172, 172, 172, + 172, 172, 172, 173, 175, 174, 176, 176, 177, 177, + 177, 177, 177, 177, 177, 179, 178, 180, 180, 180, + 180, 181, 181, 181, 181, 181, 181, 181, 181, 181, + 181, 182, 182, 183, 184, 184, 184, 185, 186, 186, + 186, 186, 186, 186, 186, 186, 187, 187, 187, 188, + 188, 189, 189, 190, 190, 191, 191, 192, 192, 192, + 193, 193, 193, 193, 193, 194, 194, 195, 195, 196, + 196, 196, 196, 196, 196, 196, 197, 197, 198, 198, + 199, 199, 200, 200, 201, 201, 202, 202, 202, 202, + 203, 203, 204, 204, 205, 206, 207, 207, 207, 207, + 207, 207, 207, 207, 207, 207, 207, 207, 208, 209, + 210, 210, 210, 210, 210, 210, 210, 210, 210, 210, + 210 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 0, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 6, 0, + 2, 2, 4, 1, 1, 1, 3, 2, 1, 1, + 1, 1, 1, 1, 4, 4, 0, 13, 0, 13, + 0, 14, 0, 3, 0, 3, 3, 3, 3, 3, + 5, 6, 7, 8, 3, 3, 4, 3, 0, 2, + 0, 4, 0, 4, 0, 4, 0, 4, 0, 4, + 0, 3, 11, 12, 0, 4, 0, 4, 0, 3, + 0, 4, 0, 4, 6, 8, 10, 11, 0, 4, + 0, 3, 0, 4, 0, 4, 0, 4, 0, 4, + 0, 4, 0, 3, 0, 4, 0, 15, 6, 8, + 9, 2, 0, 2, 1, 1, 0, 3, 0, 3, + 0, 3, 0, 3, 4, 4, 3, 6, 0, 2, + 4, 2, 6, 0, 3, 2, 1, 1, 1, 1, + 1, 1, 6, 0, 2, 2, 3, 5, 2, 5, + 6, 7, 9, 4, 0, 2, 0, 1, 1, 1, + 1, 3, 3, 3, 2, 0, 6, 0, 3, 4, + 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 6, 4, 8, 0, 3, 2, 6, 0, 6, + 6, 3, 3, 3, 3, 3, 0, 8, 7, 0, + 5, 0, 3, 1, 1, 1, 1, 2, 1, 2, + 0, 2, 3, 4, 3, 0, 2, 0, 2, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, + 1, 1, 1, 2, 1, 2, 1, 2, 3, 4, + 1, 3, 0, 1, 2, 1, 1, 3, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3, 2, 1, + 1, 3, 2, 3, 3, 3, 3, 3, 3, 3, + 3 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint16 yydefact[] = +{ + 2, 0, 1, 0, 210, 230, 231, 206, 260, 17, + 0, 0, 3, 4, 5, 6, 7, 8, 9, 10, + 11, 12, 13, 15, 14, 16, 0, 204, 205, 203, + 259, 246, 0, 0, 0, 0, 245, 0, 262, 0, + 210, 217, 215, 217, 217, 215, 215, 179, 180, 177, + 178, 172, 174, 175, 176, 210, 210, 210, 217, 173, + 188, 210, 171, 0, 0, 0, 0, 0, 0, 0, + 0, 249, 248, 0, 0, 126, 0, 0, 0, 0, + 0, 0, 0, 0, 165, 0, 0, 0, 219, 220, + 221, 222, 223, 224, 225, 211, 261, 0, 0, 0, + 42, 42, 0, 0, 0, 0, 0, 0, 0, 0, + 270, 269, 268, 266, 267, 263, 264, 265, 247, 244, + 257, 256, 255, 253, 254, 250, 251, 252, 167, 0, + 212, 214, 19, 226, 227, 218, 34, 216, 35, 0, + 0, 0, 124, 125, 0, 128, 143, 153, 196, 0, + 0, 0, 0, 0, 0, 0, 154, 182, 0, 213, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 191, 192, 193, 194, 195, 0, 156, 170, 166, 0, + 18, 23, 20, 0, 24, 43, 0, 0, 184, 127, + 0, 0, 129, 142, 0, 0, 144, 187, 0, 0, + 0, 0, 181, 234, 232, 155, 157, 158, 159, 160, + 0, 168, 228, 0, 21, 0, 0, 0, 131, 0, + 133, 148, 145, 0, 0, 0, 0, 0, 164, 233, + 235, 169, 229, 258, 0, 36, 38, 183, 0, 186, + 133, 0, 146, 143, 0, 0, 0, 189, 190, 161, + 162, 163, 28, 29, 30, 31, 32, 33, 22, 25, + 44, 44, 40, 185, 130, 128, 136, 137, 138, 139, + 140, 141, 0, 135, 242, 0, 143, 0, 199, 201, + 0, 27, 0, 0, 44, 0, 134, 147, 243, 149, + 0, 143, 242, 0, 0, 26, 58, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 58, 0, 132, 150, + 0, 0, 0, 0, 198, 0, 0, 48, 45, 46, + 49, 205, 0, 240, 0, 47, 236, 0, 0, 55, + 57, 54, 0, 58, 151, 143, 197, 0, 202, 37, + 112, 112, 112, 112, 112, 70, 112, 112, 78, 112, + 90, 112, 112, 112, 112, 112, 102, 112, 0, 112, + 112, 112, 0, 59, 237, 0, 0, 0, 56, 39, + 0, 0, 0, 0, 0, 115, 114, 60, 62, 64, + 68, 0, 74, 76, 0, 80, 0, 92, 94, 96, + 98, 100, 0, 104, 208, 0, 0, 66, 82, 88, + 0, 241, 0, 238, 50, 41, 152, 200, 0, 113, + 0, 0, 0, 0, 71, 0, 0, 0, 79, 0, + 91, 0, 0, 0, 0, 0, 103, 0, 209, 0, + 207, 0, 0, 0, 0, 239, 51, 0, 0, 61, + 63, 65, 69, 0, 75, 77, 81, 93, 95, 97, + 99, 101, 105, 0, 67, 83, 89, 0, 52, 111, + 118, 0, 0, 0, 116, 53, 0, 0, 0, 0, + 154, 84, 0, 119, 0, 116, 0, 0, 116, 0, + 122, 108, 242, 0, 117, 120, 85, 242, 242, 0, + 116, 243, 0, 0, 116, 243, 116, 243, 123, 109, + 116, 0, 121, 86, 116, 72, 116, 110, 0, 87, + 73, 106, 0, 242, 107 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int16 yydefgoto[] = +{ + -1, 1, 12, 160, 182, 183, 258, 259, 13, 14, + 15, 260, 261, 284, 140, 282, 316, 363, 410, 411, + 412, 431, 413, 381, 416, 417, 384, 419, 432, 433, + 386, 421, 422, 423, 424, 425, 392, 427, 512, 414, + 438, 373, 374, 471, 461, 466, 487, 493, 482, 489, + 16, 17, 18, 19, 165, 192, 241, 273, 20, 166, + 196, 21, 175, 176, 205, 206, 22, 128, 158, 61, + 23, 24, 217, 25, 108, 167, 293, 294, 26, 27, + 395, 37, 99, 98, 95, 136, 375, 212, 207, 208, + 325, 326, 287, 288, 415, 36, 214, 376, 30 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -309 +static const yytype_int16 yypact[] = +{ + -309, 68, -309, 338, -309, -309, -309, -309, -309, -309, + 338, 338, -309, -309, -309, -309, -309, -309, -309, -309, + -309, -309, -309, -309, -309, -309, 458, -309, -309, -309, + 605, -309, 338, 338, 338, -92, 642, 230, -309, 534, + -309, -309, -309, -309, -309, -309, -309, -309, -309, -309, + -309, -309, -309, -309, -309, -309, -309, -309, -309, -309, + -309, -309, -309, 338, 338, 338, 338, 338, 338, 338, + 338, -309, -309, 695, 338, -309, 338, 338, 338, 338, + 338, 338, 338, 338, -309, 338, 338, 338, -309, -309, + -309, -309, -309, -309, -309, -309, -309, 329, 724, 724, + 242, 242, 724, 724, 499, 434, 457, 724, 192, 250, + 392, 718, 318, 174, 174, -309, -309, -309, -309, -309, + 392, 718, 318, 174, 174, -309, -309, -309, -309, -92, + -309, -309, -309, -309, -309, -309, -309, -309, -309, -81, + 263, 263, -309, -309, -92, -309, -309, -309, -309, 338, + 338, 338, 338, 338, 338, 338, -309, -309, 6, -309, + 13, 338, -92, -92, 48, 8, 105, 35, -92, -92, + -309, -309, -309, -309, -309, 53, 373, -309, -309, -38, + -309, -309, -309, -48, -309, -309, -92, -92, -309, -309, + -36, 7, -309, -309, 80, 7, -309, -309, 60, 103, + -92, -92, -309, -309, -309, -309, 17, 38, 47, 642, + 7, 7, -309, 263, 65, -92, -92, -1, -309, 163, + 7, -309, 163, 12, 74, 94, -92, -92, 373, -309, + -309, 7, -309, -309, 818, -309, -92, -309, 253, -309, + -309, 184, -92, -309, 5, 177, 7, -309, -309, 38, + 47, 642, -309, -309, -309, -309, -309, -309, 25, -309, + -309, -309, -309, -309, 155, -309, -309, -309, -309, -309, + -309, -309, 768, -309, -92, 120, -309, 10, -309, 7, + 818, -309, 556, 562, -309, 137, -309, -309, -309, -309, + 141, -309, -92, 21, 2, -309, -309, 338, 7, 253, + -46, 338, 338, 338, 338, 253, -309, 573, -309, -309, + 153, 188, 172, 7, -309, -92, 655, -309, 7, -309, + 7, 40, 27, -309, 338, 99, -309, 93, -92, -309, + -309, -309, 692, -309, -309, -309, -309, 168, -309, -309, + 258, 258, 258, 258, 258, -309, 258, 258, -309, 258, + -309, 258, 258, 258, 258, 258, -309, 258, 253, 258, + 258, 258, 253, -309, -309, 95, 98, 7, -309, -309, + 729, 173, 7, 338, 102, 7, -309, -309, -309, -309, + -309, 338, -309, -309, 338, -309, 338, -309, -309, -309, + -309, -309, 338, -309, 117, 338, 123, -309, -309, -309, + 338, -309, 27, -309, 163, -309, -309, 7, 128, -309, + 338, 338, 338, 338, -309, -92, 338, 338, -309, 338, + -309, 338, 338, 338, 338, 338, -309, 338, -309, 131, + -309, 338, 338, 338, -92, -309, -92, 258, 132, -309, + -309, -309, -309, -92, -309, -309, -309, -309, -309, -309, + -309, -309, -309, 338, -309, -309, -309, -92, -92, -309, + -309, -92, -92, 149, 18, -309, -46, -92, -92, 338, + -309, -309, -92, 99, -92, 19, 154, 203, 20, -92, + -309, -309, -92, 338, -309, -309, -309, -92, -92, -46, + 225, -92, 165, -46, 225, -92, 225, -92, 99, -309, + 225, 338, 99, -309, 225, -309, 225, -309, 182, -309, + -309, -309, -46, -71, -309 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int16 yypgoto[] = +{ + -309, -309, -309, -309, -309, -309, -309, -240, -309, -309, + -309, -309, -309, -309, 144, -235, -295, -309, -309, -309, + -309, -309, -309, -309, -309, -309, -309, -309, -309, -309, + -309, -309, -309, -309, -309, -309, -309, -309, -309, 239, + -309, 431, -156, -100, -309, -309, -309, -309, -309, -309, + -309, -309, -309, -309, 26, -309, 56, 39, -309, -196, + -309, -309, -173, -309, -309, -309, -309, -309, -309, -309, + -309, -309, -309, -309, -309, -309, -309, -309, -25, -265, + -55, 232, 0, 333, 432, 375, -129, 4, 82, 84, + -237, -308, -283, -33, -3, 9, -309, 3, -309 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -229 +static const yytype_int16 yytable[] = +{ + 35, 62, 75, 237, 29, 28, 314, 177, 276, 311, + 178, 332, 189, 291, 364, 243, 74, 180, 281, 38, + 39, 470, 470, 470, 218, 312, 283, 366, 161, 29, + 28, 252, 253, 254, 255, 256, 257, 74, 370, 197, + 295, 71, 72, 73, 322, 102, 103, 275, 323, 307, + 211, 188, 238, 5, 6, 5, 6, 202, 403, 239, + 213, 219, 220, 224, 324, 222, 223, 190, 2, 191, + 210, 119, 110, 111, 112, 113, 114, 115, 116, 117, + 290, 231, 129, 130, 131, 120, 121, 122, 123, 124, + 125, 126, 127, 394, 435, 310, 159, 394, 5, 6, + 31, 144, 313, 5, 6, 181, 225, 8, 32, 193, + 74, 164, 33, 74, 198, 199, 34, 279, 74, 10, + 74, 323, 3, 11, 289, 228, 74, 480, 485, 186, + 187, -228, -228, 280, 229, 200, 201, 324, 4, 371, + 221, 308, 230, 162, 163, 309, 168, 169, 170, 171, + 172, 173, 174, 215, 216, 179, 245, 334, 185, 5, + 6, 7, 8, 184, 194, 9, 195, 226, 227, 318, + 320, 5, 6, 234, 10, 246, 336, 406, 11, 194, + 278, 195, 235, 236, 337, 209, 240, 265, 402, 242, + 244, 335, 323, 247, 248, 148, 190, 366, 191, 490, + 194, 367, 195, 262, 494, 496, 401, 484, 324, 274, + 409, 277, 194, 263, 195, 232, 233, 266, 267, 268, + 269, 270, 271, 232, 232, 428, 232, 232, 470, 473, + 514, 430, 194, 84, 195, 232, 437, 251, 404, 453, + 460, 29, 28, 407, 292, 141, 266, 267, 268, 269, + 270, 271, 498, 156, 5, 6, 502, 469, 139, 5, + 6, 315, 483, 272, 149, 150, 151, 152, 153, 154, + 155, 74, 97, 501, 319, 513, 372, 81, 82, 83, + 331, 459, 338, 232, 85, 86, 87, 104, 105, 106, + 511, 285, 272, 109, 317, 368, 264, 477, 327, 328, + 329, 330, 29, 321, 85, 86, 87, 400, 29, 28, + 249, 286, 250, 88, 89, 90, 91, 92, 93, 94, + 0, 365, 232, 0, 232, 88, 89, 90, 91, 92, + 93, 94, 132, 88, 89, 90, 91, 92, 93, 94, + 0, 232, 133, 134, 5, 6, 7, 8, 0, 5, + 6, 0, 8, 0, 0, 0, 0, 8, 0, 10, + 0, 396, 28, 11, 10, 396, 28, 0, 11, 10, + 408, 436, 0, 11, 0, 481, 100, 101, 486, 232, + 0, 0, 443, 85, 86, 87, 0, 0, 0, 0, + 499, 107, 429, 0, 503, 0, 505, 434, 0, 0, + 507, 457, 0, 458, 509, 0, 510, 0, 232, 0, + 462, 232, 88, 89, 90, 91, 92, 93, 94, 79, + 80, 81, 82, 83, 464, 465, 0, 0, 467, 468, + 0, 472, 31, 0, 474, 475, 0, 145, 0, 478, + 32, 479, 0, 0, 33, 0, 488, 0, 34, 491, + 463, 0, 0, 0, 495, 497, 0, 0, 500, 0, + 146, 0, 504, 40, 506, 0, 476, 31, 203, 204, + 41, 42, 43, 44, 138, 32, 0, 142, 143, 33, + 492, 0, 147, 34, 157, 0, 0, 0, 85, 86, + 87, 77, 78, 79, 80, 81, 82, 83, 508, 45, + 46, 47, 48, 49, 50, 0, 51, 52, 53, 54, + 55, 85, 86, 87, 0, 56, 57, 88, 89, 90, + 91, 92, 93, 94, 0, 0, 58, 59, 0, 60, + 135, 137, 135, 135, 137, 137, 0, 0, 0, 135, + 88, 89, 90, 91, 92, 93, 94, 0, 0, 5, + 6, 7, 8, 85, 86, 87, 0, 0, 0, 296, + 0, 0, 0, 0, 10, 306, 0, 0, 11, 0, + 0, 0, 297, 298, 299, 300, 333, 0, 297, 298, + 299, 300, 88, 89, 90, 91, 92, 93, 94, 297, + 298, 299, 300, 31, 0, 0, 0, 301, 0, 0, + 0, 32, 0, 301, 0, 33, 0, 0, 0, 34, + 302, 303, 304, 305, 301, 0, 302, 303, 304, 305, + 0, 0, 0, 418, 0, 420, 0, 302, 303, 304, + 305, 426, 76, 77, 78, 79, 80, 81, 82, 83, + 0, 0, 0, 0, 0, 96, 0, 0, 0, 439, + 440, 441, 442, 0, 0, 444, 445, 0, 446, 339, + 447, 448, 449, 450, 451, 340, 452, 0, 0, 0, + 454, 455, 456, 0, 0, 341, 342, 343, 344, 345, + 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, + 356, 357, 358, 359, 360, 361, 369, 362, 0, 0, + 0, 0, 340, 63, 64, 65, 66, 67, 68, 69, + 70, 0, 341, 342, 343, 344, 345, 346, 347, 348, + 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, + 359, 360, 361, 405, 362, 0, 0, 0, 0, 340, + 76, 77, 78, 79, 80, 81, 82, 83, 0, 341, + 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, + 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, + 0, 362, 377, 378, 379, 380, 0, 382, 383, 0, + 385, 0, 387, 388, 389, 390, 391, 0, 393, 0, + 397, 398, 399, 76, 77, 78, 79, 80, 81, 82, + 83, 0, 0, 0, 0, 0, 118, 88, 89, 90, + 91, 92, 93, 94, 0, 0, 133, 134, 78, 79, + 80, 81, 82, 83, 252, 253, 254, 255, 256, 257, + 266, 267, 268, 269, 270, 271 +}; + +static const yytype_int16 yycheck[] = +{ + 3, 26, 35, 4, 1, 1, 4, 1, 3, 292, + 4, 306, 4, 3, 322, 3, 108, 4, 258, 10, + 11, 3, 3, 3, 60, 4, 261, 98, 109, 26, + 26, 6, 7, 8, 9, 10, 11, 108, 333, 4, + 280, 32, 33, 34, 90, 45, 46, 243, 94, 284, + 179, 3, 53, 91, 92, 91, 92, 4, 366, 60, + 108, 190, 191, 3, 110, 194, 195, 59, 0, 61, + 108, 74, 63, 64, 65, 66, 67, 68, 69, 70, + 276, 210, 85, 86, 87, 76, 77, 78, 79, 80, + 81, 82, 83, 358, 402, 291, 129, 362, 91, 92, + 94, 104, 81, 91, 92, 92, 3, 94, 102, 4, + 108, 144, 106, 108, 79, 80, 110, 246, 108, 106, + 108, 94, 54, 110, 4, 108, 108, 108, 108, 162, + 163, 91, 92, 108, 96, 168, 169, 110, 70, 335, + 60, 4, 95, 140, 141, 4, 149, 150, 151, 152, + 153, 154, 155, 186, 187, 158, 82, 4, 161, 91, + 92, 93, 94, 160, 59, 97, 61, 200, 201, 298, + 299, 91, 92, 108, 106, 81, 4, 4, 110, 59, + 3, 61, 215, 216, 313, 176, 219, 3, 90, 222, + 223, 3, 94, 226, 227, 3, 59, 98, 61, 482, + 59, 108, 61, 236, 487, 488, 111, 4, 110, 242, + 108, 244, 59, 238, 61, 211, 213, 62, 63, 64, + 65, 66, 67, 219, 220, 108, 222, 223, 3, 466, + 513, 108, 59, 3, 61, 231, 108, 228, 367, 108, + 108, 238, 238, 372, 277, 101, 62, 63, 64, 65, + 66, 67, 489, 3, 91, 92, 493, 108, 16, 91, + 92, 294, 108, 108, 72, 73, 74, 75, 76, 77, + 78, 108, 40, 108, 299, 512, 108, 103, 104, 105, + 305, 437, 315, 279, 54, 55, 56, 55, 56, 57, + 108, 265, 108, 61, 297, 328, 240, 470, 301, 302, + 303, 304, 299, 299, 54, 55, 56, 362, 305, 305, + 228, 272, 228, 83, 84, 85, 86, 87, 88, 89, + -1, 324, 318, -1, 320, 83, 84, 85, 86, 87, + 88, 89, 3, 83, 84, 85, 86, 87, 88, 89, + -1, 337, 92, 93, 91, 92, 93, 94, -1, 91, + 92, -1, 94, -1, -1, -1, -1, 94, -1, 106, + -1, 358, 358, 110, 106, 362, 362, -1, 110, 106, + 373, 404, -1, 110, -1, 475, 43, 44, 478, 375, + -1, -1, 415, 54, 55, 56, -1, -1, -1, -1, + 490, 58, 395, -1, 494, -1, 496, 400, -1, -1, + 500, 434, -1, 436, 504, -1, 506, -1, 404, -1, + 443, 407, 83, 84, 85, 86, 87, 88, 89, 101, + 102, 103, 104, 105, 457, 458, -1, -1, 461, 462, + -1, 464, 94, -1, 467, 468, -1, 3, -1, 472, + 102, 474, -1, -1, 106, -1, 479, -1, 110, 482, + 453, -1, -1, -1, 487, 488, -1, -1, 491, -1, + 3, -1, 495, 5, 497, -1, 469, 94, 95, 96, + 12, 13, 14, 15, 99, 102, -1, 102, 103, 106, + 483, -1, 107, 110, 109, -1, -1, -1, 54, 55, + 56, 99, 100, 101, 102, 103, 104, 105, 501, 41, + 42, 43, 44, 45, 46, -1, 48, 49, 50, 51, + 52, 54, 55, 56, -1, 57, 58, 83, 84, 85, + 86, 87, 88, 89, -1, -1, 68, 69, -1, 71, + 98, 99, 100, 101, 102, 103, -1, -1, -1, 107, + 83, 84, 85, 86, 87, 88, 89, -1, -1, 91, + 92, 93, 94, 54, 55, 56, -1, -1, -1, 3, + -1, -1, -1, -1, 106, 3, -1, -1, 110, -1, + -1, -1, 16, 17, 18, 19, 3, -1, 16, 17, + 18, 19, 83, 84, 85, 86, 87, 88, 89, 16, + 17, 18, 19, 94, -1, -1, -1, 41, -1, -1, + -1, 102, -1, 41, -1, 106, -1, -1, -1, 110, + 54, 55, 56, 57, 41, -1, 54, 55, 56, 57, + -1, -1, -1, 384, -1, 386, -1, 54, 55, 56, + 57, 392, 98, 99, 100, 101, 102, 103, 104, 105, + -1, -1, -1, -1, -1, 111, -1, -1, -1, 410, + 411, 412, 413, -1, -1, 416, 417, -1, 419, 4, + 421, 422, 423, 424, 425, 10, 427, -1, -1, -1, + 431, 432, 433, -1, -1, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, + 35, 36, 37, 38, 39, 40, 4, 42, -1, -1, + -1, -1, 10, 98, 99, 100, 101, 102, 103, 104, + 105, -1, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, + 38, 39, 40, 4, 42, -1, -1, -1, -1, 10, + 98, 99, 100, 101, 102, 103, 104, 105, -1, 20, + 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, + -1, 42, 341, 342, 343, 344, -1, 346, 347, -1, + 349, -1, 351, 352, 353, 354, 355, -1, 357, -1, + 359, 360, 361, 98, 99, 100, 101, 102, 103, 104, + 105, -1, -1, -1, -1, -1, 111, 83, 84, 85, + 86, 87, 88, 89, -1, -1, 92, 93, 100, 101, + 102, 103, 104, 105, 6, 7, 8, 9, 10, 11, + 62, 63, 64, 65, 66, 67 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 113, 0, 54, 70, 91, 92, 93, 94, 97, + 106, 110, 114, 120, 121, 122, 162, 163, 164, 165, + 170, 173, 178, 182, 183, 185, 190, 191, 199, 209, + 210, 94, 102, 106, 110, 206, 207, 193, 207, 207, + 5, 12, 13, 14, 15, 41, 42, 43, 44, 45, + 46, 48, 49, 50, 51, 52, 57, 58, 68, 69, + 71, 181, 190, 98, 99, 100, 101, 102, 103, 104, + 105, 207, 207, 207, 108, 205, 98, 99, 100, 101, + 102, 103, 104, 105, 3, 54, 55, 56, 83, 84, + 85, 86, 87, 88, 89, 196, 111, 193, 195, 194, + 195, 195, 194, 194, 193, 193, 193, 195, 186, 193, + 207, 207, 207, 207, 207, 207, 207, 207, 111, 206, + 207, 207, 207, 207, 207, 207, 207, 207, 179, 206, + 206, 206, 3, 92, 93, 196, 197, 196, 197, 16, + 126, 126, 197, 197, 206, 3, 3, 197, 3, 72, + 73, 74, 75, 76, 77, 78, 3, 197, 180, 205, + 115, 109, 209, 209, 205, 166, 171, 187, 206, 206, + 206, 206, 206, 206, 206, 174, 175, 1, 4, 206, + 4, 92, 116, 117, 209, 206, 205, 205, 3, 4, + 59, 61, 167, 4, 59, 61, 172, 4, 79, 80, + 205, 205, 4, 95, 96, 176, 177, 200, 201, 207, + 108, 198, 199, 108, 208, 205, 205, 184, 60, 198, + 198, 60, 198, 198, 3, 3, 205, 205, 108, 96, + 95, 198, 199, 209, 108, 205, 205, 4, 53, 60, + 205, 168, 205, 3, 205, 82, 81, 205, 205, 200, + 201, 207, 6, 7, 8, 9, 10, 11, 118, 119, + 123, 124, 205, 190, 168, 3, 62, 63, 64, 65, + 66, 67, 108, 169, 205, 171, 3, 205, 3, 198, + 108, 119, 127, 127, 125, 166, 169, 204, 205, 4, + 171, 3, 205, 188, 189, 119, 3, 16, 17, 18, + 19, 41, 54, 55, 56, 57, 3, 127, 4, 4, + 171, 204, 4, 81, 4, 205, 128, 206, 198, 190, + 198, 199, 90, 94, 110, 202, 203, 206, 206, 206, + 206, 190, 128, 3, 4, 3, 4, 198, 205, 4, + 10, 20, 21, 22, 23, 24, 25, 26, 27, 28, + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, + 39, 40, 42, 129, 203, 206, 98, 108, 205, 4, + 128, 171, 108, 153, 154, 198, 209, 153, 153, 153, + 153, 135, 153, 153, 138, 153, 142, 153, 153, 153, + 153, 153, 148, 153, 191, 192, 209, 153, 153, 153, + 192, 111, 90, 203, 198, 4, 4, 198, 206, 108, + 130, 131, 132, 134, 151, 206, 136, 137, 151, 139, + 151, 143, 144, 145, 146, 147, 151, 149, 108, 206, + 108, 133, 140, 141, 206, 203, 205, 108, 152, 151, + 151, 151, 151, 205, 151, 151, 151, 151, 151, 151, + 151, 151, 151, 108, 151, 151, 151, 205, 205, 154, + 108, 156, 205, 206, 205, 205, 157, 205, 205, 108, + 3, 155, 205, 202, 205, 205, 206, 174, 205, 205, + 108, 155, 160, 108, 4, 108, 155, 158, 205, 161, + 204, 205, 206, 159, 204, 205, 204, 205, 202, 155, + 205, 108, 202, 155, 205, 155, 205, 155, 206, 155, + 155, 108, 150, 202, 204 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 18: +#line 200 "rcparse.y" + { + define_accelerator ((yyvsp[(1) - (6)].id), &(yyvsp[(3) - (6)].res_info), (yyvsp[(5) - (6)].pacc)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 19: +#line 210 "rcparse.y" + { + (yyval.pacc) = NULL; + } + break; + + case 20: +#line 214 "rcparse.y" + { + rc_accelerator *a; + + a = (rc_accelerator *) res_alloc (sizeof *a); + *a = (yyvsp[(2) - (2)].acc); + if ((yyvsp[(1) - (2)].pacc) == NULL) + (yyval.pacc) = a; + else + { + rc_accelerator **pp; + + for (pp = &(yyvsp[(1) - (2)].pacc)->next; *pp != NULL; pp = &(*pp)->next) + ; + *pp = a; + (yyval.pacc) = (yyvsp[(1) - (2)].pacc); + } + } + break; + + case 21: +#line 235 "rcparse.y" + { + (yyval.acc) = (yyvsp[(1) - (2)].acc); + (yyval.acc).id = (yyvsp[(2) - (2)].il); + } + break; + + case 22: +#line 240 "rcparse.y" + { + (yyval.acc) = (yyvsp[(1) - (4)].acc); + (yyval.acc).id = (yyvsp[(2) - (4)].il); + (yyval.acc).flags |= (yyvsp[(4) - (4)].is); + if (((yyval.acc).flags & ACC_VIRTKEY) == 0 + && ((yyval.acc).flags & (ACC_SHIFT | ACC_CONTROL)) != 0) + rcparse_warning (_("inappropriate modifiers for non-VIRTKEY")); + } + break; + + case 23: +#line 252 "rcparse.y" + { + const char *s = (yyvsp[(1) - (1)].s); + char ch; + + (yyval.acc).next = NULL; + (yyval.acc).id = 0; + ch = *s; + if (ch != '^') + (yyval.acc).flags = 0; + else + { + (yyval.acc).flags = ACC_CONTROL | ACC_VIRTKEY; + ++s; + ch = TOUPPER (s[0]); + } + (yyval.acc).key = ch; + if (s[1] != '\0') + rcparse_warning (_("accelerator should only be one character")); + } + break; + + case 24: +#line 272 "rcparse.y" + { + (yyval.acc).next = NULL; + (yyval.acc).flags = 0; + (yyval.acc).id = 0; + (yyval.acc).key = (yyvsp[(1) - (1)].il); + } + break; + + case 25: +#line 282 "rcparse.y" + { + (yyval.is) = (yyvsp[(1) - (1)].is); + } + break; + + case 26: +#line 286 "rcparse.y" + { + (yyval.is) = (yyvsp[(1) - (3)].is) | (yyvsp[(3) - (3)].is); + } + break; + + case 27: +#line 291 "rcparse.y" + { + (yyval.is) = (yyvsp[(1) - (2)].is) | (yyvsp[(2) - (2)].is); + } + break; + + case 28: +#line 298 "rcparse.y" + { + (yyval.is) = ACC_VIRTKEY; + } + break; + + case 29: +#line 302 "rcparse.y" + { + /* This is just the absence of VIRTKEY. */ + (yyval.is) = 0; + } + break; + + case 30: +#line 307 "rcparse.y" + { + (yyval.is) = ACC_NOINVERT; + } + break; + + case 31: +#line 311 "rcparse.y" + { + (yyval.is) = ACC_SHIFT; + } + break; + + case 32: +#line 315 "rcparse.y" + { + (yyval.is) = ACC_CONTROL; + } + break; + + case 33: +#line 319 "rcparse.y" + { + (yyval.is) = ACC_ALT; + } + break; + + case 34: +#line 328 "rcparse.y" + { + define_bitmap ((yyvsp[(1) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 35: +#line 340 "rcparse.y" + { + define_cursor ((yyvsp[(1) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 36: +#line 353 "rcparse.y" + { + memset (&dialog, 0, sizeof dialog); + dialog.x = (yyvsp[(5) - (8)].il); + dialog.y = (yyvsp[(6) - (8)].il); + dialog.width = (yyvsp[(7) - (8)].il); + dialog.height = (yyvsp[(8) - (8)].il); + dialog.style = WS_POPUP | WS_BORDER | WS_SYSMENU; + dialog.exstyle = (yyvsp[(4) - (8)].il); + dialog.menu.named = 1; + dialog.class.named = 1; + dialog.font = NULL; + dialog.ex = NULL; + dialog.controls = NULL; + sub_res_info = (yyvsp[(3) - (8)].res_info); + style = 0; + } + break; + + case 37: +#line 370 "rcparse.y" + { + define_dialog ((yyvsp[(1) - (13)].id), &sub_res_info, &dialog); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 38: +#line 378 "rcparse.y" + { + memset (&dialog, 0, sizeof dialog); + dialog.x = (yyvsp[(5) - (8)].il); + dialog.y = (yyvsp[(6) - (8)].il); + dialog.width = (yyvsp[(7) - (8)].il); + dialog.height = (yyvsp[(8) - (8)].il); + dialog.style = WS_POPUP | WS_BORDER | WS_SYSMENU; + dialog.exstyle = (yyvsp[(4) - (8)].il); + dialog.menu.named = 1; + dialog.class.named = 1; + dialog.font = NULL; + dialog.ex = ((rc_dialog_ex *) + res_alloc (sizeof (rc_dialog_ex))); + memset (dialog.ex, 0, sizeof (rc_dialog_ex)); + dialog.controls = NULL; + sub_res_info = (yyvsp[(3) - (8)].res_info); + style = 0; + } + break; + + case 39: +#line 397 "rcparse.y" + { + define_dialog ((yyvsp[(1) - (13)].id), &sub_res_info, &dialog); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 40: +#line 405 "rcparse.y" + { + memset (&dialog, 0, sizeof dialog); + dialog.x = (yyvsp[(5) - (9)].il); + dialog.y = (yyvsp[(6) - (9)].il); + dialog.width = (yyvsp[(7) - (9)].il); + dialog.height = (yyvsp[(8) - (9)].il); + dialog.style = WS_POPUP | WS_BORDER | WS_SYSMENU; + dialog.exstyle = (yyvsp[(4) - (9)].il); + dialog.menu.named = 1; + dialog.class.named = 1; + dialog.font = NULL; + dialog.ex = ((rc_dialog_ex *) + res_alloc (sizeof (rc_dialog_ex))); + memset (dialog.ex, 0, sizeof (rc_dialog_ex)); + dialog.ex->help = (yyvsp[(9) - (9)].il); + dialog.controls = NULL; + sub_res_info = (yyvsp[(3) - (9)].res_info); + style = 0; + } + break; + + case 41: +#line 425 "rcparse.y" + { + define_dialog ((yyvsp[(1) - (14)].id), &sub_res_info, &dialog); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 42: +#line 435 "rcparse.y" + { + (yyval.il) = 0; + } + break; + + case 43: +#line 439 "rcparse.y" + { + (yyval.il) = (yyvsp[(3) - (3)].il); + } + break; + + case 45: +#line 447 "rcparse.y" + { + dialog.style |= WS_CAPTION; + style |= WS_CAPTION; + dialog.caption = (yyvsp[(3) - (3)].uni); + } + break; + + case 46: +#line 453 "rcparse.y" + { + dialog.class = (yyvsp[(3) - (3)].id); + } + break; + + case 47: +#line 458 "rcparse.y" + { + dialog.style = style; + } + break; + + case 48: +#line 462 "rcparse.y" + { + dialog.exstyle = (yyvsp[(3) - (3)].il); + } + break; + + case 49: +#line 466 "rcparse.y" + { + res_unistring_to_id (& dialog.class, (yyvsp[(3) - (3)].uni)); + } + break; + + case 50: +#line 470 "rcparse.y" + { + dialog.style |= DS_SETFONT; + style |= DS_SETFONT; + dialog.pointsize = (yyvsp[(3) - (5)].il); + dialog.font = (yyvsp[(5) - (5)].uni); + if (dialog.ex != NULL) + { + dialog.ex->weight = 0; + dialog.ex->italic = 0; + dialog.ex->charset = 1; + } + } + break; + + case 51: +#line 483 "rcparse.y" + { + dialog.style |= DS_SETFONT; + style |= DS_SETFONT; + dialog.pointsize = (yyvsp[(3) - (6)].il); + dialog.font = (yyvsp[(5) - (6)].uni); + if (dialog.ex == NULL) + rcparse_warning (_("extended FONT requires DIALOGEX")); + else + { + dialog.ex->weight = (yyvsp[(6) - (6)].il); + dialog.ex->italic = 0; + dialog.ex->charset = 1; + } + } + break; + + case 52: +#line 498 "rcparse.y" + { + dialog.style |= DS_SETFONT; + style |= DS_SETFONT; + dialog.pointsize = (yyvsp[(3) - (7)].il); + dialog.font = (yyvsp[(5) - (7)].uni); + if (dialog.ex == NULL) + rcparse_warning (_("extended FONT requires DIALOGEX")); + else + { + dialog.ex->weight = (yyvsp[(6) - (7)].il); + dialog.ex->italic = (yyvsp[(7) - (7)].il); + dialog.ex->charset = 1; + } + } + break; + + case 53: +#line 513 "rcparse.y" + { + dialog.style |= DS_SETFONT; + style |= DS_SETFONT; + dialog.pointsize = (yyvsp[(3) - (8)].il); + dialog.font = (yyvsp[(5) - (8)].uni); + if (dialog.ex == NULL) + rcparse_warning (_("extended FONT requires DIALOGEX")); + else + { + dialog.ex->weight = (yyvsp[(6) - (8)].il); + dialog.ex->italic = (yyvsp[(7) - (8)].il); + dialog.ex->charset = (yyvsp[(8) - (8)].il); + } + } + break; + + case 54: +#line 528 "rcparse.y" + { + dialog.menu = (yyvsp[(3) - (3)].id); + } + break; + + case 55: +#line 532 "rcparse.y" + { + sub_res_info.characteristics = (yyvsp[(3) - (3)].il); + } + break; + + case 56: +#line 536 "rcparse.y" + { + sub_res_info.language = (yyvsp[(3) - (4)].il) | ((yyvsp[(4) - (4)].il) << SUBLANG_SHIFT); + } + break; + + case 57: +#line 540 "rcparse.y" + { + sub_res_info.version = (yyvsp[(3) - (3)].il); + } + break; + + case 59: +#line 548 "rcparse.y" + { + rc_dialog_control **pp; + + for (pp = &dialog.controls; *pp != NULL; pp = &(*pp)->next) + ; + *pp = (yyvsp[(2) - (2)].dialog_control); + } + break; + + case 60: +#line 559 "rcparse.y" + { + default_style = BS_AUTO3STATE | WS_TABSTOP; + base_style = BS_AUTO3STATE; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 61: +#line 567 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 62: +#line 571 "rcparse.y" + { + default_style = BS_AUTOCHECKBOX | WS_TABSTOP; + base_style = BS_AUTOCHECKBOX; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 63: +#line 579 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 64: +#line 583 "rcparse.y" + { + default_style = BS_AUTORADIOBUTTON | WS_TABSTOP; + base_style = BS_AUTORADIOBUTTON; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 65: +#line 591 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 66: +#line 595 "rcparse.y" + { + default_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + base_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_EDIT; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 67: +#line 603 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + if (dialog.ex == NULL) + rcparse_warning (_("BEDIT requires DIALOGEX")); + res_string_to_id (&(yyval.dialog_control)->class, "BEDIT"); + } + break; + + case 68: +#line 610 "rcparse.y" + { + default_style = BS_CHECKBOX | WS_TABSTOP; + base_style = BS_CHECKBOX | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 69: +#line 618 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 70: +#line 622 "rcparse.y" + { + /* This is as per MSDN documentation. With some (???) + versions of MS rc.exe their is no default style. */ + default_style = CBS_SIMPLE | WS_TABSTOP; + base_style = 0; + class.named = 0; + class.u.id = CTL_COMBOBOX; + res_text_field = res_null_text; + } + break; + + case 71: +#line 632 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(3) - (3)].dialog_control); + } + break; + + case 72: +#line 637 "rcparse.y" + { + (yyval.dialog_control) = define_control ((yyvsp[(2) - (11)].id), (yyvsp[(3) - (11)].il), (yyvsp[(6) - (11)].il), (yyvsp[(7) - (11)].il), (yyvsp[(8) - (11)].il), (yyvsp[(9) - (11)].il), (yyvsp[(4) - (11)].id), style, (yyvsp[(10) - (11)].il)); + if ((yyvsp[(11) - (11)].rcdata_item) != NULL) + { + if (dialog.ex == NULL) + rcparse_warning (_("control data requires DIALOGEX")); + (yyval.dialog_control)->data = (yyvsp[(11) - (11)].rcdata_item); + } + } + break; + + case 73: +#line 648 "rcparse.y" + { + (yyval.dialog_control) = define_control ((yyvsp[(2) - (12)].id), (yyvsp[(3) - (12)].il), (yyvsp[(6) - (12)].il), (yyvsp[(7) - (12)].il), (yyvsp[(8) - (12)].il), (yyvsp[(9) - (12)].il), (yyvsp[(4) - (12)].id), style, (yyvsp[(10) - (12)].il)); + if (dialog.ex == NULL) + rcparse_warning (_("help ID requires DIALOGEX")); + (yyval.dialog_control)->help = (yyvsp[(11) - (12)].il); + (yyval.dialog_control)->data = (yyvsp[(12) - (12)].rcdata_item); + } + break; + + case 74: +#line 656 "rcparse.y" + { + default_style = SS_CENTER | WS_GROUP; + base_style = SS_CENTER; + class.named = 0; + class.u.id = CTL_STATIC; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 75: +#line 664 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 76: +#line 668 "rcparse.y" + { + default_style = BS_DEFPUSHBUTTON | WS_TABSTOP; + base_style = BS_DEFPUSHBUTTON | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 77: +#line 676 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 78: +#line 680 "rcparse.y" + { + default_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + base_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_EDIT; + res_text_field = res_null_text; + } + break; + + case 79: +#line 688 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(3) - (3)].dialog_control); + } + break; + + case 80: +#line 692 "rcparse.y" + { + default_style = BS_GROUPBOX; + base_style = BS_GROUPBOX; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 81: +#line 700 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 82: +#line 704 "rcparse.y" + { + default_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + base_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_EDIT; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 83: +#line 712 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + if (dialog.ex == NULL) + rcparse_warning (_("IEDIT requires DIALOGEX")); + res_string_to_id (&(yyval.dialog_control)->class, "HEDIT"); + } + break; + + case 84: +#line 719 "rcparse.y" + { + (yyval.dialog_control) = define_icon_control ((yyvsp[(2) - (6)].id), (yyvsp[(3) - (6)].il), (yyvsp[(4) - (6)].il), (yyvsp[(5) - (6)].il), 0, 0, 0, (yyvsp[(6) - (6)].rcdata_item), + dialog.ex); + } + break; + + case 85: +#line 725 "rcparse.y" + { + (yyval.dialog_control) = define_icon_control ((yyvsp[(2) - (8)].id), (yyvsp[(3) - (8)].il), (yyvsp[(4) - (8)].il), (yyvsp[(5) - (8)].il), 0, 0, 0, (yyvsp[(8) - (8)].rcdata_item), + dialog.ex); + } + break; + + case 86: +#line 731 "rcparse.y" + { + (yyval.dialog_control) = define_icon_control ((yyvsp[(2) - (10)].id), (yyvsp[(3) - (10)].il), (yyvsp[(4) - (10)].il), (yyvsp[(5) - (10)].il), style, (yyvsp[(9) - (10)].il), 0, (yyvsp[(10) - (10)].rcdata_item), + dialog.ex); + } + break; + + case 87: +#line 737 "rcparse.y" + { + (yyval.dialog_control) = define_icon_control ((yyvsp[(2) - (11)].id), (yyvsp[(3) - (11)].il), (yyvsp[(4) - (11)].il), (yyvsp[(5) - (11)].il), style, (yyvsp[(9) - (11)].il), (yyvsp[(10) - (11)].il), (yyvsp[(11) - (11)].rcdata_item), + dialog.ex); + } + break; + + case 88: +#line 742 "rcparse.y" + { + default_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + base_style = ES_LEFT | WS_BORDER | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_EDIT; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 89: +#line 750 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + if (dialog.ex == NULL) + rcparse_warning (_("IEDIT requires DIALOGEX")); + res_string_to_id (&(yyval.dialog_control)->class, "IEDIT"); + } + break; + + case 90: +#line 757 "rcparse.y" + { + default_style = LBS_NOTIFY | WS_BORDER; + base_style = LBS_NOTIFY | WS_BORDER; + class.named = 0; + class.u.id = CTL_LISTBOX; + res_text_field = res_null_text; + } + break; + + case 91: +#line 765 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(3) - (3)].dialog_control); + } + break; + + case 92: +#line 769 "rcparse.y" + { + default_style = SS_LEFT | WS_GROUP; + base_style = SS_LEFT; + class.named = 0; + class.u.id = CTL_STATIC; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 93: +#line 777 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 94: +#line 781 "rcparse.y" + { + default_style = BS_PUSHBOX | WS_TABSTOP; + base_style = BS_PUSHBOX; + class.named = 0; + class.u.id = CTL_BUTTON; + } + break; + + case 95: +#line 788 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 96: +#line 792 "rcparse.y" + { + default_style = BS_PUSHBUTTON | WS_TABSTOP; + base_style = BS_PUSHBUTTON | WS_TABSTOP; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 97: +#line 800 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 98: +#line 804 "rcparse.y" + { + default_style = BS_RADIOBUTTON | WS_TABSTOP; + base_style = BS_RADIOBUTTON; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 99: +#line 812 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 100: +#line 816 "rcparse.y" + { + default_style = SS_RIGHT | WS_GROUP; + base_style = SS_RIGHT; + class.named = 0; + class.u.id = CTL_STATIC; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 101: +#line 824 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 102: +#line 828 "rcparse.y" + { + default_style = SBS_HORZ; + base_style = 0; + class.named = 0; + class.u.id = CTL_SCROLLBAR; + res_text_field = res_null_text; + } + break; + + case 103: +#line 836 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(3) - (3)].dialog_control); + } + break; + + case 104: +#line 840 "rcparse.y" + { + default_style = BS_3STATE | WS_TABSTOP; + base_style = BS_3STATE; + class.named = 0; + class.u.id = CTL_BUTTON; + res_text_field = (yyvsp[(2) - (2)].id); + } + break; + + case 105: +#line 848 "rcparse.y" + { + (yyval.dialog_control) = (yyvsp[(4) - (4)].dialog_control); + } + break; + + case 106: +#line 853 "rcparse.y" + { style = WS_CHILD | WS_VISIBLE; } + break; + + case 107: +#line 855 "rcparse.y" + { + rc_res_id cid; + cid.named = 0; + cid.u.id = CTL_BUTTON; + (yyval.dialog_control) = define_control ((yyvsp[(2) - (15)].id), (yyvsp[(3) - (15)].il), (yyvsp[(5) - (15)].il), (yyvsp[(7) - (15)].il), (yyvsp[(9) - (15)].il), (yyvsp[(11) - (15)].il), cid, + style, (yyvsp[(15) - (15)].il)); + } + break; + + case 108: +#line 873 "rcparse.y" + { + (yyval.dialog_control) = define_control (res_text_field, (yyvsp[(1) - (6)].il), (yyvsp[(2) - (6)].il), (yyvsp[(3) - (6)].il), (yyvsp[(4) - (6)].il), (yyvsp[(5) - (6)].il), class, + default_style | WS_CHILD | WS_VISIBLE, 0); + if ((yyvsp[(6) - (6)].rcdata_item) != NULL) + { + if (dialog.ex == NULL) + rcparse_warning (_("control data requires DIALOGEX")); + (yyval.dialog_control)->data = (yyvsp[(6) - (6)].rcdata_item); + } + } + break; + + case 109: +#line 885 "rcparse.y" + { + (yyval.dialog_control) = define_control (res_text_field, (yyvsp[(1) - (8)].il), (yyvsp[(2) - (8)].il), (yyvsp[(3) - (8)].il), (yyvsp[(4) - (8)].il), (yyvsp[(5) - (8)].il), class, style, (yyvsp[(7) - (8)].il)); + if ((yyvsp[(8) - (8)].rcdata_item) != NULL) + { + if (dialog.ex == NULL) + rcparse_warning (_("control data requires DIALOGEX")); + (yyval.dialog_control)->data = (yyvsp[(8) - (8)].rcdata_item); + } + } + break; + + case 110: +#line 896 "rcparse.y" + { + (yyval.dialog_control) = define_control (res_text_field, (yyvsp[(1) - (9)].il), (yyvsp[(2) - (9)].il), (yyvsp[(3) - (9)].il), (yyvsp[(4) - (9)].il), (yyvsp[(5) - (9)].il), class, style, (yyvsp[(7) - (9)].il)); + if (dialog.ex == NULL) + rcparse_warning (_("help ID requires DIALOGEX")); + (yyval.dialog_control)->help = (yyvsp[(8) - (9)].il); + (yyval.dialog_control)->data = (yyvsp[(9) - (9)].rcdata_item); + } + break; + + case 111: +#line 907 "rcparse.y" + { + if ((yyvsp[(2) - (2)].id).named) + res_unistring_to_id (&(yyval.id), (yyvsp[(2) - (2)].id).u.n.name); + else + (yyval.id)=(yyvsp[(2) - (2)].id); + } + break; + + case 112: +#line 917 "rcparse.y" + { + res_string_to_id (&(yyval.id), ""); + } + break; + + case 113: +#line 920 "rcparse.y" + { (yyval.id)=(yyvsp[(1) - (2)].id); } + break; + + case 114: +#line 925 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = (yyvsp[(1) - (1)].il); + } + break; + + case 115: +#line 930 "rcparse.y" + { + (yyval.id).named = 1; + (yyval.id).u.n.name = (yyvsp[(1) - (1)].uni); + (yyval.id).u.n.length = unichar_len ((yyvsp[(1) - (1)].uni)); + } + break; + + case 116: +#line 939 "rcparse.y" + { + (yyval.rcdata_item) = NULL; + } + break; + + case 117: +#line 943 "rcparse.y" + { + (yyval.rcdata_item) = (yyvsp[(2) - (3)].rcdata).first; + } + break; + + case 118: +#line 952 "rcparse.y" + { style = WS_CHILD | WS_VISIBLE; } + break; + + case 120: +#line 958 "rcparse.y" + { style = SS_ICON | WS_CHILD | WS_VISIBLE; } + break; + + case 122: +#line 964 "rcparse.y" + { style = base_style | WS_CHILD | WS_VISIBLE; } + break; + + case 124: +#line 972 "rcparse.y" + { + define_font ((yyvsp[(1) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 125: +#line 984 "rcparse.y" + { + define_icon ((yyvsp[(1) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 126: +#line 997 "rcparse.y" + { + language = (yyvsp[(2) - (3)].il) | ((yyvsp[(3) - (3)].il) << SUBLANG_SHIFT); + } + break; + + case 127: +#line 1006 "rcparse.y" + { + define_menu ((yyvsp[(1) - (6)].id), &(yyvsp[(3) - (6)].res_info), (yyvsp[(5) - (6)].menuitem)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 128: +#line 1016 "rcparse.y" + { + (yyval.menuitem) = NULL; + } + break; + + case 129: +#line 1020 "rcparse.y" + { + if ((yyvsp[(1) - (2)].menuitem) == NULL) + (yyval.menuitem) = (yyvsp[(2) - (2)].menuitem); + else + { + rc_menuitem **pp; + + for (pp = &(yyvsp[(1) - (2)].menuitem)->next; *pp != NULL; pp = &(*pp)->next) + ; + *pp = (yyvsp[(2) - (2)].menuitem); + (yyval.menuitem) = (yyvsp[(1) - (2)].menuitem); + } + } + break; + + case 130: +#line 1037 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (4)].uni), (yyvsp[(3) - (4)].il), (yyvsp[(4) - (4)].is), 0, 0, NULL); + } + break; + + case 131: +#line 1041 "rcparse.y" + { + (yyval.menuitem) = define_menuitem (NULL, 0, 0, 0, 0, NULL); + } + break; + + case 132: +#line 1045 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (6)].uni), 0, (yyvsp[(3) - (6)].is), 0, 0, (yyvsp[(5) - (6)].menuitem)); + } + break; + + case 133: +#line 1052 "rcparse.y" + { + (yyval.is) = 0; + } + break; + + case 134: +#line 1056 "rcparse.y" + { + (yyval.is) = (yyvsp[(1) - (3)].is) | (yyvsp[(3) - (3)].is); + } + break; + + case 135: +#line 1060 "rcparse.y" + { + (yyval.is) = (yyvsp[(1) - (2)].is) | (yyvsp[(2) - (2)].is); + } + break; + + case 136: +#line 1067 "rcparse.y" + { + (yyval.is) = MENUITEM_CHECKED; + } + break; + + case 137: +#line 1071 "rcparse.y" + { + (yyval.is) = MENUITEM_GRAYED; + } + break; + + case 138: +#line 1075 "rcparse.y" + { + (yyval.is) = MENUITEM_HELP; + } + break; + + case 139: +#line 1079 "rcparse.y" + { + (yyval.is) = MENUITEM_INACTIVE; + } + break; + + case 140: +#line 1083 "rcparse.y" + { + (yyval.is) = MENUITEM_MENUBARBREAK; + } + break; + + case 141: +#line 1087 "rcparse.y" + { + (yyval.is) = MENUITEM_MENUBREAK; + } + break; + + case 142: +#line 1096 "rcparse.y" + { + define_menu ((yyvsp[(1) - (6)].id), &(yyvsp[(3) - (6)].res_info), (yyvsp[(5) - (6)].menuitem)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 143: +#line 1106 "rcparse.y" + { + (yyval.menuitem) = NULL; + } + break; + + case 144: +#line 1110 "rcparse.y" + { + if ((yyvsp[(1) - (2)].menuitem) == NULL) + (yyval.menuitem) = (yyvsp[(2) - (2)].menuitem); + else + { + rc_menuitem **pp; + + for (pp = &(yyvsp[(1) - (2)].menuitem)->next; *pp != NULL; pp = &(*pp)->next) + ; + *pp = (yyvsp[(2) - (2)].menuitem); + (yyval.menuitem) = (yyvsp[(1) - (2)].menuitem); + } + } + break; + + case 145: +#line 1127 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (2)].uni), 0, 0, 0, 0, NULL); + } + break; + + case 146: +#line 1131 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (3)].uni), (yyvsp[(3) - (3)].il), 0, 0, 0, NULL); + } + break; + + case 147: +#line 1135 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (5)].uni), (yyvsp[(3) - (5)].il), (yyvsp[(4) - (5)].il), (yyvsp[(5) - (5)].il), 0, NULL); + } + break; + + case 148: +#line 1139 "rcparse.y" + { + (yyval.menuitem) = define_menuitem (NULL, 0, 0, 0, 0, NULL); + } + break; + + case 149: +#line 1143 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (5)].uni), 0, 0, 0, 0, (yyvsp[(4) - (5)].menuitem)); + } + break; + + case 150: +#line 1147 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (6)].uni), (yyvsp[(3) - (6)].il), 0, 0, 0, (yyvsp[(5) - (6)].menuitem)); + } + break; + + case 151: +#line 1151 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (7)].uni), (yyvsp[(3) - (7)].il), (yyvsp[(4) - (7)].il), 0, 0, (yyvsp[(6) - (7)].menuitem)); + } + break; + + case 152: +#line 1156 "rcparse.y" + { + (yyval.menuitem) = define_menuitem ((yyvsp[(2) - (9)].uni), (yyvsp[(3) - (9)].il), (yyvsp[(4) - (9)].il), (yyvsp[(5) - (9)].il), (yyvsp[(6) - (9)].il), (yyvsp[(8) - (9)].menuitem)); + } + break; + + case 153: +#line 1165 "rcparse.y" + { + define_messagetable ((yyvsp[(1) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 154: +#line 1177 "rcparse.y" + { + rcparse_rcdata (); + } + break; + + case 155: +#line 1181 "rcparse.y" + { + rcparse_normal (); + (yyval.rcdata) = (yyvsp[(2) - (2)].rcdata); + } + break; + + case 156: +#line 1189 "rcparse.y" + { + (yyval.rcdata).first = NULL; + (yyval.rcdata).last = NULL; + } + break; + + case 157: +#line 1194 "rcparse.y" + { + (yyval.rcdata) = (yyvsp[(1) - (1)].rcdata); + } + break; + + case 158: +#line 1201 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_string ((yyvsp[(1) - (1)].ss).s, (yyvsp[(1) - (1)].ss).length); + (yyval.rcdata).first = ri; + (yyval.rcdata).last = ri; + } + break; + + case 159: +#line 1209 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_unistring ((yyvsp[(1) - (1)].suni).s, (yyvsp[(1) - (1)].suni).length); + (yyval.rcdata).first = ri; + (yyval.rcdata).last = ri; + } + break; + + case 160: +#line 1217 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_number ((yyvsp[(1) - (1)].i).val, (yyvsp[(1) - (1)].i).dword); + (yyval.rcdata).first = ri; + (yyval.rcdata).last = ri; + } + break; + + case 161: +#line 1225 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_string ((yyvsp[(3) - (3)].ss).s, (yyvsp[(3) - (3)].ss).length); + (yyval.rcdata).first = (yyvsp[(1) - (3)].rcdata).first; + (yyvsp[(1) - (3)].rcdata).last->next = ri; + (yyval.rcdata).last = ri; + } + break; + + case 162: +#line 1234 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_unistring ((yyvsp[(3) - (3)].suni).s, (yyvsp[(3) - (3)].suni).length); + (yyval.rcdata).first = (yyvsp[(1) - (3)].rcdata).first; + (yyvsp[(1) - (3)].rcdata).last->next = ri; + (yyval.rcdata).last = ri; + } + break; + + case 163: +#line 1243 "rcparse.y" + { + rc_rcdata_item *ri; + + ri = define_rcdata_number ((yyvsp[(3) - (3)].i).val, (yyvsp[(3) - (3)].i).dword); + (yyval.rcdata).first = (yyvsp[(1) - (3)].rcdata).first; + (yyvsp[(1) - (3)].rcdata).last->next = ri; + (yyval.rcdata).last = ri; + } + break; + + case 164: +#line 1252 "rcparse.y" + { + (yyval.rcdata)=(yyvsp[(1) - (2)].rcdata); + } + break; + + case 165: +#line 1261 "rcparse.y" + { sub_res_info = (yyvsp[(2) - (3)].res_info); } + break; + + case 168: +#line 1268 "rcparse.y" + { + define_stringtable (&sub_res_info, (yyvsp[(2) - (3)].il), (yyvsp[(3) - (3)].uni)); + rcparse_discard_strings (); + } + break; + + case 169: +#line 1273 "rcparse.y" + { + define_stringtable (&sub_res_info, (yyvsp[(2) - (4)].il), (yyvsp[(4) - (4)].uni)); + rcparse_discard_strings (); + } + break; + + case 170: +#line 1278 "rcparse.y" + { + rcparse_warning (_("invalid stringtable resource.")); + abort (); + } + break; + + case 171: +#line 1286 "rcparse.y" + { + (yyval.id)=(yyvsp[(1) - (1)].id); + } + break; + + case 172: +#line 1290 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = 23; + } + break; + + case 173: +#line 1295 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_RCDATA; + } + break; + + case 174: +#line 1300 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_MANIFEST; + } + break; + + case 175: +#line 1305 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_PLUGPLAY; + } + break; + + case 176: +#line 1310 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_VXD; + } + break; + + case 177: +#line 1315 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_DLGINCLUDE; + } + break; + + case 178: +#line 1320 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_DLGINIT; + } + break; + + case 179: +#line 1325 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_ANICURSOR; + } + break; + + case 180: +#line 1330 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = RT_ANIICON; + } + break; + + case 181: +#line 1341 "rcparse.y" + { + define_user_data ((yyvsp[(1) - (6)].id), (yyvsp[(2) - (6)].id), &(yyvsp[(3) - (6)].res_info), (yyvsp[(5) - (6)].rcdata).first); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 182: +#line 1348 "rcparse.y" + { + define_user_file ((yyvsp[(1) - (4)].id), (yyvsp[(2) - (4)].id), &(yyvsp[(3) - (4)].res_info), (yyvsp[(4) - (4)].s)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 183: +#line 1358 "rcparse.y" + { + define_toolbar ((yyvsp[(1) - (8)].id), &(yyvsp[(3) - (8)].res_info), (yyvsp[(4) - (8)].il), (yyvsp[(5) - (8)].il), (yyvsp[(7) - (8)].toobar_item)); + } + break; + + case 184: +#line 1363 "rcparse.y" + { (yyval.toobar_item)= NULL; } + break; + + case 185: +#line 1365 "rcparse.y" + { + rc_toolbar_item *c,*n; + c = (yyvsp[(1) - (3)].toobar_item); + n= (rc_toolbar_item *) + res_alloc (sizeof (rc_toolbar_item)); + if (c != NULL) + while (c->next != NULL) + c = c->next; + n->prev = c; + n->next = NULL; + if (c != NULL) + c->next = n; + n->id = (yyvsp[(3) - (3)].id); + if ((yyvsp[(1) - (3)].toobar_item) == NULL) + (yyval.toobar_item) = n; + else + (yyval.toobar_item) = (yyvsp[(1) - (3)].toobar_item); + } + break; + + case 186: +#line 1384 "rcparse.y" + { + rc_toolbar_item *c,*n; + c = (yyvsp[(1) - (2)].toobar_item); + n= (rc_toolbar_item *) + res_alloc (sizeof (rc_toolbar_item)); + if (c != NULL) + while (c->next != NULL) + c = c->next; + n->prev = c; + n->next = NULL; + if (c != NULL) + c->next = n; + n->id.named = 0; + n->id.u.id = 0; + if ((yyvsp[(1) - (2)].toobar_item) == NULL) + (yyval.toobar_item) = n; + else + (yyval.toobar_item) = (yyvsp[(1) - (2)].toobar_item); + } + break; + + case 187: +#line 1409 "rcparse.y" + { + define_versioninfo ((yyvsp[(1) - (6)].id), language, (yyvsp[(3) - (6)].fixver), (yyvsp[(5) - (6)].verinfo)); + if (yychar != YYEMPTY) + YYERROR; + rcparse_discard_strings (); + } + break; + + case 188: +#line 1419 "rcparse.y" + { + (yyval.fixver) = ((rc_fixed_versioninfo *) + res_alloc (sizeof (rc_fixed_versioninfo))); + memset ((yyval.fixver), 0, sizeof (rc_fixed_versioninfo)); + } + break; + + case 189: +#line 1425 "rcparse.y" + { + (yyvsp[(1) - (6)].fixver)->file_version_ms = ((yyvsp[(3) - (6)].il) << 16) | (yyvsp[(4) - (6)].il); + (yyvsp[(1) - (6)].fixver)->file_version_ls = ((yyvsp[(5) - (6)].il) << 16) | (yyvsp[(6) - (6)].il); + (yyval.fixver) = (yyvsp[(1) - (6)].fixver); + } + break; + + case 190: +#line 1431 "rcparse.y" + { + (yyvsp[(1) - (6)].fixver)->product_version_ms = ((yyvsp[(3) - (6)].il) << 16) | (yyvsp[(4) - (6)].il); + (yyvsp[(1) - (6)].fixver)->product_version_ls = ((yyvsp[(5) - (6)].il) << 16) | (yyvsp[(6) - (6)].il); + (yyval.fixver) = (yyvsp[(1) - (6)].fixver); + } + break; + + case 191: +#line 1437 "rcparse.y" + { + (yyvsp[(1) - (3)].fixver)->file_flags_mask = (yyvsp[(3) - (3)].il); + (yyval.fixver) = (yyvsp[(1) - (3)].fixver); + } + break; + + case 192: +#line 1442 "rcparse.y" + { + (yyvsp[(1) - (3)].fixver)->file_flags = (yyvsp[(3) - (3)].il); + (yyval.fixver) = (yyvsp[(1) - (3)].fixver); + } + break; + + case 193: +#line 1447 "rcparse.y" + { + (yyvsp[(1) - (3)].fixver)->file_os = (yyvsp[(3) - (3)].il); + (yyval.fixver) = (yyvsp[(1) - (3)].fixver); + } + break; + + case 194: +#line 1452 "rcparse.y" + { + (yyvsp[(1) - (3)].fixver)->file_type = (yyvsp[(3) - (3)].il); + (yyval.fixver) = (yyvsp[(1) - (3)].fixver); + } + break; + + case 195: +#line 1457 "rcparse.y" + { + (yyvsp[(1) - (3)].fixver)->file_subtype = (yyvsp[(3) - (3)].il); + (yyval.fixver) = (yyvsp[(1) - (3)].fixver); + } + break; + + case 196: +#line 1471 "rcparse.y" + { + (yyval.verinfo) = NULL; + } + break; + + case 197: +#line 1475 "rcparse.y" + { + (yyval.verinfo) = append_ver_stringfileinfo ((yyvsp[(1) - (8)].verinfo), (yyvsp[(4) - (8)].s), (yyvsp[(6) - (8)].verstring)); + } + break; + + case 198: +#line 1479 "rcparse.y" + { + (yyval.verinfo) = append_ver_varfileinfo ((yyvsp[(1) - (7)].verinfo), (yyvsp[(5) - (7)].uni), (yyvsp[(6) - (7)].vervar)); + } + break; + + case 199: +#line 1486 "rcparse.y" + { + (yyval.verstring) = NULL; + } + break; + + case 200: +#line 1490 "rcparse.y" + { + (yyval.verstring) = append_verval ((yyvsp[(1) - (5)].verstring), (yyvsp[(3) - (5)].uni), (yyvsp[(5) - (5)].uni)); + } + break; + + case 201: +#line 1497 "rcparse.y" + { + (yyval.vervar) = NULL; + } + break; + + case 202: +#line 1501 "rcparse.y" + { + (yyval.vervar) = append_vertrans ((yyvsp[(1) - (3)].vervar), (yyvsp[(2) - (3)].il), (yyvsp[(3) - (3)].il)); + } + break; + + case 203: +#line 1510 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = (yyvsp[(1) - (1)].il); + } + break; + + case 204: +#line 1515 "rcparse.y" + { + res_unistring_to_id (&(yyval.id), (yyvsp[(1) - (1)].uni)); + } + break; + + case 205: +#line 1524 "rcparse.y" + { + (yyval.uni) = (yyvsp[(1) - (1)].uni); + } + break; + + case 206: +#line 1528 "rcparse.y" + { + unichar *h = NULL; + unicode_from_ascii ((rc_uint_type *) NULL, &h, (yyvsp[(1) - (1)].s)); + (yyval.uni) = h; + } + break; + + case 207: +#line 1538 "rcparse.y" + { + (yyval.id).named = 0; + (yyval.id).u.id = (yyvsp[(1) - (2)].il); + } + break; + + case 208: +#line 1543 "rcparse.y" + { + res_unistring_to_id (&(yyval.id), (yyvsp[(1) - (1)].uni)); + } + break; + + case 209: +#line 1547 "rcparse.y" + { + res_unistring_to_id (&(yyval.id), (yyvsp[(1) - (2)].uni)); + } + break; + + case 210: +#line 1557 "rcparse.y" + { + memset (&(yyval.res_info), 0, sizeof (rc_res_res_info)); + (yyval.res_info).language = language; + /* FIXME: Is this the right default? */ + (yyval.res_info).memflags = MEMFLAG_MOVEABLE | MEMFLAG_PURE | MEMFLAG_DISCARDABLE; + } + break; + + case 211: +#line 1564 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (2)].res_info); + (yyval.res_info).memflags |= (yyvsp[(2) - (2)].memflags).on; + (yyval.res_info).memflags &=~ (yyvsp[(2) - (2)].memflags).off; + } + break; + + case 212: +#line 1570 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (3)].res_info); + (yyval.res_info).characteristics = (yyvsp[(3) - (3)].il); + } + break; + + case 213: +#line 1575 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (4)].res_info); + (yyval.res_info).language = (yyvsp[(3) - (4)].il) | ((yyvsp[(4) - (4)].il) << SUBLANG_SHIFT); + } + break; + + case 214: +#line 1580 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (3)].res_info); + (yyval.res_info).version = (yyvsp[(3) - (3)].il); + } + break; + + case 215: +#line 1590 "rcparse.y" + { + memset (&(yyval.res_info), 0, sizeof (rc_res_res_info)); + (yyval.res_info).language = language; + (yyval.res_info).memflags = MEMFLAG_MOVEABLE | MEMFLAG_DISCARDABLE; + } + break; + + case 216: +#line 1596 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (2)].res_info); + (yyval.res_info).memflags |= (yyvsp[(2) - (2)].memflags).on; + (yyval.res_info).memflags &=~ (yyvsp[(2) - (2)].memflags).off; + } + break; + + case 217: +#line 1607 "rcparse.y" + { + memset (&(yyval.res_info), 0, sizeof (rc_res_res_info)); + (yyval.res_info).language = language; + (yyval.res_info).memflags = MEMFLAG_MOVEABLE | MEMFLAG_PURE | MEMFLAG_DISCARDABLE; + } + break; + + case 218: +#line 1613 "rcparse.y" + { + (yyval.res_info) = (yyvsp[(1) - (2)].res_info); + (yyval.res_info).memflags |= (yyvsp[(2) - (2)].memflags).on; + (yyval.res_info).memflags &=~ (yyvsp[(2) - (2)].memflags).off; + } + break; + + case 219: +#line 1625 "rcparse.y" + { + (yyval.memflags).on = MEMFLAG_MOVEABLE; + (yyval.memflags).off = 0; + } + break; + + case 220: +#line 1630 "rcparse.y" + { + (yyval.memflags).on = 0; + (yyval.memflags).off = MEMFLAG_MOVEABLE; + } + break; + + case 221: +#line 1635 "rcparse.y" + { + (yyval.memflags).on = MEMFLAG_PURE; + (yyval.memflags).off = 0; + } + break; + + case 222: +#line 1640 "rcparse.y" + { + (yyval.memflags).on = 0; + (yyval.memflags).off = MEMFLAG_PURE; + } + break; + + case 223: +#line 1645 "rcparse.y" + { + (yyval.memflags).on = MEMFLAG_PRELOAD; + (yyval.memflags).off = 0; + } + break; + + case 224: +#line 1650 "rcparse.y" + { + (yyval.memflags).on = 0; + (yyval.memflags).off = MEMFLAG_PRELOAD; + } + break; + + case 225: +#line 1655 "rcparse.y" + { + (yyval.memflags).on = MEMFLAG_DISCARDABLE; + (yyval.memflags).off = 0; + } + break; + + case 226: +#line 1665 "rcparse.y" + { + (yyval.s) = (yyvsp[(1) - (1)].s); + } + break; + + case 227: +#line 1669 "rcparse.y" + { + (yyval.s) = (yyvsp[(1) - (1)].s); + } + break; + + case 228: +#line 1677 "rcparse.y" + { + (yyval.uni) = (yyvsp[(1) - (1)].uni); + } + break; + + case 229: +#line 1682 "rcparse.y" + { + rc_uint_type l1 = unichar_len ((yyvsp[(1) - (2)].uni)); + rc_uint_type l2 = unichar_len ((yyvsp[(2) - (2)].uni)); + unichar *h = (unichar *) res_alloc ((l1 + l2 + 1) * sizeof (unichar)); + if (l1 != 0) + memcpy (h, (yyvsp[(1) - (2)].uni), l1 * sizeof (unichar)); + if (l2 != 0) + memcpy (h + l1, (yyvsp[(2) - (2)].uni), l2 * sizeof (unichar)); + h[l1 + l2] = 0; + (yyval.uni) = h; + } + break; + + case 230: +#line 1697 "rcparse.y" + { + (yyval.uni) = unichar_dup ((yyvsp[(1) - (1)].uni)); + } + break; + + case 231: +#line 1701 "rcparse.y" + { + unichar *h = NULL; + unicode_from_ascii ((rc_uint_type *) NULL, &h, (yyvsp[(1) - (1)].s)); + (yyval.uni) = h; + } + break; + + case 232: +#line 1710 "rcparse.y" + { + (yyval.ss) = (yyvsp[(1) - (1)].ss); + } + break; + + case 233: +#line 1714 "rcparse.y" + { + rc_uint_type l = (yyvsp[(1) - (2)].ss).length + (yyvsp[(2) - (2)].ss).length; + char *h = (char *) res_alloc (l); + memcpy (h, (yyvsp[(1) - (2)].ss).s, (yyvsp[(1) - (2)].ss).length); + memcpy (h + (yyvsp[(1) - (2)].ss).length, (yyvsp[(2) - (2)].ss).s, (yyvsp[(2) - (2)].ss).length); + (yyval.ss).s = h; + (yyval.ss).length = l; + } + break; + + case 234: +#line 1726 "rcparse.y" + { + (yyval.suni) = (yyvsp[(1) - (1)].suni); + } + break; + + case 235: +#line 1730 "rcparse.y" + { + rc_uint_type l = (yyvsp[(1) - (2)].suni).length + (yyvsp[(2) - (2)].suni).length; + unichar *h = (unichar *) res_alloc (l * sizeof (unichar)); + memcpy (h, (yyvsp[(1) - (2)].suni).s, (yyvsp[(1) - (2)].suni).length * sizeof (unichar)); + memcpy (h + (yyvsp[(1) - (2)].suni).length, (yyvsp[(2) - (2)].suni).s, (yyvsp[(2) - (2)].suni).length * sizeof (unichar)); + (yyval.suni).s = h; + (yyval.suni).length = l; + } + break; + + case 236: +#line 1752 "rcparse.y" + { + style |= (yyvsp[(1) - (1)].il); + } + break; + + case 237: +#line 1756 "rcparse.y" + { + style &=~ (yyvsp[(2) - (2)].il); + } + break; + + case 238: +#line 1760 "rcparse.y" + { + style |= (yyvsp[(3) - (3)].il); + } + break; + + case 239: +#line 1764 "rcparse.y" + { + style &=~ (yyvsp[(4) - (4)].il); + } + break; + + case 240: +#line 1771 "rcparse.y" + { + (yyval.il) = (yyvsp[(1) - (1)].i).val; + } + break; + + case 241: +#line 1775 "rcparse.y" + { + (yyval.il) = (yyvsp[(2) - (3)].il); + } + break; + + case 242: +#line 1784 "rcparse.y" + { + (yyval.il) = 0; + } + break; + + case 243: +#line 1788 "rcparse.y" + { + (yyval.il) = (yyvsp[(1) - (1)].il); + } + break; + + case 244: +#line 1797 "rcparse.y" + { + (yyval.il) = (yyvsp[(2) - (2)].il); + } + break; + + case 245: +#line 1806 "rcparse.y" + { + (yyval.il) = (yyvsp[(1) - (1)].i).val; + } + break; + + case 246: +#line 1815 "rcparse.y" + { + (yyval.i) = (yyvsp[(1) - (1)].i); + } + break; + + case 247: +#line 1819 "rcparse.y" + { + (yyval.i) = (yyvsp[(2) - (3)].i); + } + break; + + case 248: +#line 1823 "rcparse.y" + { + (yyval.i).val = ~ (yyvsp[(2) - (2)].i).val; + (yyval.i).dword = (yyvsp[(2) - (2)].i).dword; + } + break; + + case 249: +#line 1828 "rcparse.y" + { + (yyval.i).val = - (yyvsp[(2) - (2)].i).val; + (yyval.i).dword = (yyvsp[(2) - (2)].i).dword; + } + break; + + case 250: +#line 1833 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val * (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 251: +#line 1838 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val / (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 252: +#line 1843 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val % (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 253: +#line 1848 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val + (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 254: +#line 1853 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val - (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 255: +#line 1858 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val & (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 256: +#line 1863 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val ^ (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 257: +#line 1868 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val | (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 258: +#line 1879 "rcparse.y" + { + (yyval.il) = (yyvsp[(2) - (2)].il); + } + break; + + case 259: +#line 1888 "rcparse.y" + { + (yyval.il) = (yyvsp[(1) - (1)].i).val; + } + break; + + case 260: +#line 1899 "rcparse.y" + { + (yyval.i) = (yyvsp[(1) - (1)].i); + } + break; + + case 261: +#line 1903 "rcparse.y" + { + (yyval.i) = (yyvsp[(2) - (3)].i); + } + break; + + case 262: +#line 1907 "rcparse.y" + { + (yyval.i).val = ~ (yyvsp[(2) - (2)].i).val; + (yyval.i).dword = (yyvsp[(2) - (2)].i).dword; + } + break; + + case 263: +#line 1912 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val * (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 264: +#line 1917 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val / (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 265: +#line 1922 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val % (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 266: +#line 1927 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val + (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 267: +#line 1932 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val - (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 268: +#line 1937 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val & (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 269: +#line 1942 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val ^ (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + case 270: +#line 1947 "rcparse.y" + { + (yyval.i).val = (yyvsp[(1) - (3)].i).val | (yyvsp[(3) - (3)].i).val; + (yyval.i).dword = (yyvsp[(1) - (3)].i).dword || (yyvsp[(3) - (3)].i).dword; + } + break; + + +/* Line 1267 of yacc.c. */ +#line 4374 "rcparse.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 1953 "rcparse.y" + + +/* Set the language from the command line. */ + +void +rcparse_set_language (int lang) +{ + language = lang; +} + diff --git a/binutils/rcparse.h b/binutils/rcparse.h new file mode 100644 index 0000000..e86edd9 --- /dev/null +++ b/binutils/rcparse.h @@ -0,0 +1,297 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + BEG = 258, + END = 259, + ACCELERATORS = 260, + VIRTKEY = 261, + ASCII = 262, + NOINVERT = 263, + SHIFT = 264, + CONTROL = 265, + ALT = 266, + BITMAP = 267, + CURSOR = 268, + DIALOG = 269, + DIALOGEX = 270, + EXSTYLE = 271, + CAPTION = 272, + CLASS = 273, + STYLE = 274, + AUTO3STATE = 275, + AUTOCHECKBOX = 276, + AUTORADIOBUTTON = 277, + CHECKBOX = 278, + COMBOBOX = 279, + CTEXT = 280, + DEFPUSHBUTTON = 281, + EDITTEXT = 282, + GROUPBOX = 283, + LISTBOX = 284, + LTEXT = 285, + PUSHBOX = 286, + PUSHBUTTON = 287, + RADIOBUTTON = 288, + RTEXT = 289, + SCROLLBAR = 290, + STATE3 = 291, + USERBUTTON = 292, + BEDIT = 293, + HEDIT = 294, + IEDIT = 295, + FONT = 296, + ICON = 297, + ANICURSOR = 298, + ANIICON = 299, + DLGINCLUDE = 300, + DLGINIT = 301, + FONTDIR = 302, + HTML = 303, + MANIFEST = 304, + PLUGPLAY = 305, + VXD = 306, + TOOLBAR = 307, + BUTTON = 308, + LANGUAGE = 309, + CHARACTERISTICS = 310, + VERSIONK = 311, + MENU = 312, + MENUEX = 313, + MENUITEM = 314, + SEPARATOR = 315, + POPUP = 316, + CHECKED = 317, + GRAYED = 318, + HELP = 319, + INACTIVE = 320, + MENUBARBREAK = 321, + MENUBREAK = 322, + MESSAGETABLE = 323, + RCDATA = 324, + STRINGTABLE = 325, + VERSIONINFO = 326, + FILEVERSION = 327, + PRODUCTVERSION = 328, + FILEFLAGSMASK = 329, + FILEFLAGS = 330, + FILEOS = 331, + FILETYPE = 332, + FILESUBTYPE = 333, + BLOCKSTRINGFILEINFO = 334, + BLOCKVARFILEINFO = 335, + VALUE = 336, + BLOCK = 337, + MOVEABLE = 338, + FIXED = 339, + PURE = 340, + IMPURE = 341, + PRELOAD = 342, + LOADONCALL = 343, + DISCARDABLE = 344, + NOT = 345, + QUOTEDUNISTRING = 346, + QUOTEDSTRING = 347, + STRING = 348, + NUMBER = 349, + SIZEDUNISTRING = 350, + SIZEDSTRING = 351, + IGNORED_TOKEN = 352, + NEG = 353 + }; +#endif +/* Tokens. */ +#define BEG 258 +#define END 259 +#define ACCELERATORS 260 +#define VIRTKEY 261 +#define ASCII 262 +#define NOINVERT 263 +#define SHIFT 264 +#define CONTROL 265 +#define ALT 266 +#define BITMAP 267 +#define CURSOR 268 +#define DIALOG 269 +#define DIALOGEX 270 +#define EXSTYLE 271 +#define CAPTION 272 +#define CLASS 273 +#define STYLE 274 +#define AUTO3STATE 275 +#define AUTOCHECKBOX 276 +#define AUTORADIOBUTTON 277 +#define CHECKBOX 278 +#define COMBOBOX 279 +#define CTEXT 280 +#define DEFPUSHBUTTON 281 +#define EDITTEXT 282 +#define GROUPBOX 283 +#define LISTBOX 284 +#define LTEXT 285 +#define PUSHBOX 286 +#define PUSHBUTTON 287 +#define RADIOBUTTON 288 +#define RTEXT 289 +#define SCROLLBAR 290 +#define STATE3 291 +#define USERBUTTON 292 +#define BEDIT 293 +#define HEDIT 294 +#define IEDIT 295 +#define FONT 296 +#define ICON 297 +#define ANICURSOR 298 +#define ANIICON 299 +#define DLGINCLUDE 300 +#define DLGINIT 301 +#define FONTDIR 302 +#define HTML 303 +#define MANIFEST 304 +#define PLUGPLAY 305 +#define VXD 306 +#define TOOLBAR 307 +#define BUTTON 308 +#define LANGUAGE 309 +#define CHARACTERISTICS 310 +#define VERSIONK 311 +#define MENU 312 +#define MENUEX 313 +#define MENUITEM 314 +#define SEPARATOR 315 +#define POPUP 316 +#define CHECKED 317 +#define GRAYED 318 +#define HELP 319 +#define INACTIVE 320 +#define MENUBARBREAK 321 +#define MENUBREAK 322 +#define MESSAGETABLE 323 +#define RCDATA 324 +#define STRINGTABLE 325 +#define VERSIONINFO 326 +#define FILEVERSION 327 +#define PRODUCTVERSION 328 +#define FILEFLAGSMASK 329 +#define FILEFLAGS 330 +#define FILEOS 331 +#define FILETYPE 332 +#define FILESUBTYPE 333 +#define BLOCKSTRINGFILEINFO 334 +#define BLOCKVARFILEINFO 335 +#define VALUE 336 +#define BLOCK 337 +#define MOVEABLE 338 +#define FIXED 339 +#define PURE 340 +#define IMPURE 341 +#define PRELOAD 342 +#define LOADONCALL 343 +#define DISCARDABLE 344 +#define NOT 345 +#define QUOTEDUNISTRING 346 +#define QUOTEDSTRING 347 +#define STRING 348 +#define NUMBER 349 +#define SIZEDUNISTRING 350 +#define SIZEDSTRING 351 +#define IGNORED_TOKEN 352 +#define NEG 353 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 69 "rcparse.y" +{ + rc_accelerator acc; + rc_accelerator *pacc; + rc_dialog_control *dialog_control; + rc_menuitem *menuitem; + struct + { + rc_rcdata_item *first; + rc_rcdata_item *last; + } rcdata; + rc_rcdata_item *rcdata_item; + rc_fixed_versioninfo *fixver; + rc_ver_info *verinfo; + rc_ver_stringinfo *verstring; + rc_ver_varinfo *vervar; + rc_toolbar_item *toobar_item; + rc_res_id id; + rc_res_res_info res_info; + struct + { + rc_uint_type on; + rc_uint_type off; + } memflags; + struct + { + rc_uint_type val; + /* Nonzero if this number was explicitly specified as long. */ + int dword; + } i; + rc_uint_type il; + rc_uint_type is; + const char *s; + struct + { + rc_uint_type length; + const char *s; + } ss; + unichar *uni; + struct + { + rc_uint_type length; + const unichar *s; + } suni; +} +/* Line 1529 of yacc.c. */ +#line 290 "rcparse.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/sysinfo.c b/binutils/sysinfo.c new file mode 100644 index 0000000..53b151f --- /dev/null +++ b/binutils/sysinfo.c @@ -0,0 +1,1968 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + COND = 258, + REPEAT = 259, + TYPE = 260, + NAME = 261, + NUMBER = 262, + UNIT = 263 + }; +#endif +/* Tokens. */ +#define COND 258 +#define REPEAT 259 +#define TYPE 260 +#define NAME 261 +#define NUMBER 262 +#define UNIT 263 + + + + +/* Copy the first part of user declarations. */ +#line 21 "sysinfo.y" + +#include <stdio.h> +#include <stdlib.h> + +static char writecode; +static char *it; +static int code; +static char * repeat; +static char *oldrepeat; +static char *name; +static int rdepth; +static char *names[] = {" ","[n]","[n][m]"}; +static char *pnames[]= {"","*","**"}; + +static int yyerror (char *s); +extern int yylex (void); + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 40 "sysinfo.y" +{ + int i; + char *s; +} +/* Line 193 of yacc.c. */ +#line 135 "sysinfo.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 148 "sysinfo.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if defined YYENABLE_NLS && YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 3 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 38 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 11 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 19 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 27 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 55 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 263 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 5, 6, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 7, 8, 9, 10 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 4, 7, 10, 11, 12, 19, 22, + 25, 28, 29, 30, 37, 38, 45, 46, 57, 59, + 60, 64, 67, 71, 72, 73, 77, 78 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 12, 0, -1, -1, 13, 14, -1, 15, 14, -1, + -1, -1, 5, 8, 9, 16, 17, 6, -1, 22, + 17, -1, 20, 17, -1, 18, 17, -1, -1, -1, + 5, 4, 8, 19, 17, 6, -1, -1, 5, 3, + 8, 21, 17, 6, -1, -1, 5, 25, 5, 24, + 26, 6, 27, 23, 28, 6, -1, 7, -1, -1, + 5, 8, 6, -1, 9, 10, -1, 5, 8, 6, + -1, -1, -1, 5, 29, 6, -1, -1, 29, 5, + 8, 8, 6, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 54, 54, 54, 92, 93, 98, 97, 175, 176, + 177, 178, 182, 181, 229, 228, 256, 255, 363, 364, + 368, 373, 379, 380, 383, 384, 386, 388 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "COND", "REPEAT", "'('", "')'", "TYPE", + "NAME", "NUMBER", "UNIT", "$accept", "top", "@1", "it_list", "it", "@2", + "it_field_list", "repeat_it_field", "@3", "cond_it_field", "@4", + "it_field", "@5", "attr_type", "attr_desc", "attr_size", "attr_id", + "enums", "enum_list", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 40, 41, 260, 261, 262, + 263 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 11, 13, 12, 14, 14, 16, 15, 17, 17, + 17, 17, 19, 18, 21, 20, 23, 22, 24, 24, + 25, 26, 27, 27, 28, 28, 29, 29 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 0, 2, 2, 0, 0, 6, 2, 2, + 2, 0, 0, 6, 0, 6, 0, 10, 1, 0, + 3, 2, 3, 0, 0, 3, 0, 5 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 2, 0, 5, 1, 0, 3, 5, 0, 4, 6, + 11, 0, 0, 11, 11, 11, 0, 0, 0, 0, + 7, 10, 9, 8, 14, 12, 0, 19, 11, 11, + 20, 18, 0, 0, 0, 0, 0, 15, 13, 21, + 23, 0, 16, 0, 24, 22, 26, 0, 0, 17, + 0, 25, 0, 0, 27 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 1, 2, 5, 6, 10, 12, 13, 29, 14, + 28, 15, 44, 32, 19, 36, 42, 47, 48 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -14 +static const yytype_int8 yypact[] = +{ + -14, 8, 4, -14, 2, -14, 4, 3, -14, -14, + 6, 0, 7, 6, 6, 6, 9, 10, 11, 15, + -14, -14, -14, -14, -14, -14, 16, 14, 6, 6, + -14, -14, 5, 17, 18, 19, 20, -14, -14, -14, + 22, 23, -14, 24, 27, -14, -14, 28, 1, -14, + 25, -14, 29, 30, -14 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -14, -14, -14, 32, -14, -14, -13, -14, -14, -14, + -14, -14, -14, -14, -14, -14, -14, -14, -14 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -1 +static const yytype_uint8 yytable[] = +{ + 21, 22, 23, 16, 17, 18, 50, 51, 3, 4, + 7, 11, 9, 20, 35, 33, 34, 24, 25, 26, + 27, 31, 30, 37, 38, 0, 40, 41, 0, 39, + 45, 43, 46, 52, 49, 0, 54, 53, 8 +}; + +static const yytype_int8 yycheck[] = +{ + 13, 14, 15, 3, 4, 5, 5, 6, 0, 5, + 8, 5, 9, 6, 9, 28, 29, 8, 8, 8, + 5, 7, 6, 6, 6, -1, 6, 5, -1, 10, + 6, 8, 5, 8, 6, -1, 6, 8, 6 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 12, 13, 0, 5, 14, 15, 8, 14, 9, + 16, 5, 17, 18, 20, 22, 3, 4, 5, 25, + 6, 17, 17, 17, 8, 8, 8, 5, 21, 19, + 6, 7, 24, 17, 17, 9, 26, 6, 6, 10, + 6, 5, 27, 8, 23, 6, 5, 28, 29, 6, + 5, 6, 8, 8, 6 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (!yyvaluep) + return; +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yyrule) + YYSTYPE *yyvsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + YYUSE (yyvaluep); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 54 "sysinfo.y" + { + switch (writecode) + { + case 'i': + printf("#ifdef SYSROFF_SWAP_IN\n"); + break; + case 'p': + printf("#ifdef SYSROFF_p\n"); + break; + case 'd': + break; + case 'g': + printf("#ifdef SYSROFF_SWAP_OUT\n"); + break; + case 'c': + printf("#ifdef SYSROFF_PRINT\n"); + printf("#include <stdio.h>\n"); + printf("#include <stdlib.h>\n"); + printf("#include <ansidecl.h>\n"); + break; + } + } + break; + + case 3: +#line 76 "sysinfo.y" + { + switch (writecode) { + case 'i': + case 'p': + case 'g': + case 'c': + printf("#endif\n"); + break; + case 'd': + break; + } +} + break; + + case 6: +#line 98 "sysinfo.y" + { + it = (yyvsp[(2) - (3)].s); code = (yyvsp[(3) - (3)].i); + switch (writecode) + { + case 'd': + printf("\n\n\n#define IT_%s_CODE 0x%x\n", it,code); + printf("struct IT_%s;\n", it); + printf("extern void sysroff_swap_%s_in PARAMS ((struct IT_%s *));\n", + (yyvsp[(2) - (3)].s), it); + printf("extern void sysroff_swap_%s_out PARAMS ((FILE *, struct IT_%s *));\n", + (yyvsp[(2) - (3)].s), it); + printf("extern void sysroff_print_%s_out PARAMS ((struct IT_%s *));\n", + (yyvsp[(2) - (3)].s), it); + printf("struct IT_%s { \n", it); + break; + case 'i': + printf("void sysroff_swap_%s_in(ptr)\n",(yyvsp[(2) - (3)].s)); + printf("struct IT_%s *ptr;\n", it); + printf("{\n"); + printf("unsigned char raw[255];\n"); + printf("\tint idx = 0 ;\n"); + printf("\tint size;\n"); + printf("memset(raw,0,255);\n"); + printf("memset(ptr,0,sizeof(*ptr));\n"); + printf("size = fillup(raw);\n"); + break; + case 'g': + printf("void sysroff_swap_%s_out(file,ptr)\n",(yyvsp[(2) - (3)].s)); + printf("FILE * file;\n"); + printf("struct IT_%s *ptr;\n", it); + printf("{\n"); + printf("\tunsigned char raw[255];\n"); + printf("\tint idx = 16 ;\n"); + printf("\tmemset (raw, 0, 255);\n"); + printf("\tcode = IT_%s_CODE;\n", it); + break; + case 'o': + printf("void sysroff_swap_%s_out(abfd,ptr)\n",(yyvsp[(2) - (3)].s)); + printf("bfd * abfd;\n"); + printf("struct IT_%s *ptr;\n",it); + printf("{\n"); + printf("int idx = 0 ;\n"); + break; + case 'c': + printf("void sysroff_print_%s_out(ptr)\n",(yyvsp[(2) - (3)].s)); + printf("struct IT_%s *ptr;\n", it); + printf("{\n"); + printf("itheader(\"%s\", IT_%s_CODE);\n",(yyvsp[(2) - (3)].s),(yyvsp[(2) - (3)].s)); + break; + + case 't': + break; + } + + } + break; + + case 7: +#line 155 "sysinfo.y" + { + switch (writecode) { + case 'd': + printf("};\n"); + break; + case 'g': + printf("\tchecksum(file,raw, idx, IT_%s_CODE);\n", it); + + case 'i': + + case 'o': + case 'c': + printf("}\n"); + } +} + break; + + case 12: +#line 182 "sysinfo.y" + { + rdepth++; + switch (writecode) + { + case 'c': + if (rdepth==1) + printf("\tprintf(\"repeat %%d\\n\", %s);\n",(yyvsp[(3) - (3)].s)); + if (rdepth==2) + printf("\tprintf(\"repeat %%d\\n\", %s[n]);\n",(yyvsp[(3) - (3)].s)); + case 'i': + case 'g': + case 'o': + + if (rdepth==1) + { + printf("\t{ int n; for (n = 0; n < %s; n++) {\n", (yyvsp[(3) - (3)].s)); + } + if (rdepth == 2) { + printf("\t{ int m; for (m = 0; m < %s[n]; m++) {\n", (yyvsp[(3) - (3)].s)); + } + + break; + } + + oldrepeat = repeat; + repeat = (yyvsp[(3) - (3)].s); + } + break; + + case 13: +#line 212 "sysinfo.y" + { + repeat = oldrepeat; + oldrepeat =0; + rdepth--; + switch (writecode) + { + case 'i': + case 'g': + case 'o': + case 'c': + printf("\t}}\n"); + } + } + break; + + case 14: +#line 229 "sysinfo.y" + { + switch (writecode) + { + case 'i': + case 'g': + case 'o': + case 'c': + printf("\tif (%s) {\n", (yyvsp[(3) - (3)].s)); + break; + } + } + break; + + case 15: +#line 242 "sysinfo.y" + { + switch (writecode) + { + case 'i': + case 'g': + case 'o': + case 'c': + printf("\t}\n"); + } + } + break; + + case 16: +#line 256 "sysinfo.y" + {name = (yyvsp[(7) - (7)].s); } + break; + + case 17: +#line 258 "sysinfo.y" + { + char *desc = (yyvsp[(2) - (10)].s); + char *type = (yyvsp[(4) - (10)].s); + int size = (yyvsp[(5) - (10)].i); + char *id = (yyvsp[(7) - (10)].s); +char *p = names[rdepth]; +char *ptr = pnames[rdepth]; + switch (writecode) + { + case 'g': + if (size % 8) + { + + printf("\twriteBITS(ptr->%s%s,raw,&idx,%d);\n", + id, + names[rdepth], size); + + } + else { + printf("\twrite%s(ptr->%s%s,raw,&idx,%d,file);\n", + type, + id, + names[rdepth],size/8); + } + break; + case 'i': + { + + if (rdepth >= 1) + + { + printf("if (!ptr->%s) ptr->%s = (%s*)xcalloc(%s, sizeof(ptr->%s[0]));\n", + id, + id, + type, + repeat, + id); + } + + if (rdepth == 2) + { + printf("if (!ptr->%s[n]) ptr->%s[n] = (%s**)xcalloc(%s[n], sizeof(ptr->%s[n][0]));\n", + id, + id, + type, + repeat, + id); + } + + } + + if (size % 8) + { + printf("\tptr->%s%s = getBITS(raw,&idx, %d,size);\n", + id, + names[rdepth], + size); + } + else { + printf("\tptr->%s%s = get%s(raw,&idx, %d,size);\n", + id, + names[rdepth], + type, + size/8); + } + break; + case 'o': + printf("\tput%s(raw,%d,%d,&idx,ptr->%s%s);\n", type,size/8,size%8,id,names[rdepth]); + break; + case 'd': + if (repeat) + printf("\t/* repeat %s */\n", repeat); + + if (type[0] == 'I') { + printf("\tint %s%s; \t/* %s */\n",ptr,id, desc); + } + else if (type[0] =='C') { + printf("\tchar %s*%s;\t /* %s */\n",ptr,id, desc); + } + else { + printf("\tbarray %s%s;\t /* %s */\n",ptr,id, desc); + } + break; + case 'c': + printf("tabout();\n"); + printf("\tprintf(\"/*%-30s*/ ptr->%s = \");\n", desc, id); + + if (type[0] == 'I') + printf("\tprintf(\"%%d\\n\",ptr->%s%s);\n", id,p); + else if (type[0] == 'C') + printf("\tprintf(\"%%s\\n\",ptr->%s%s);\n", id,p); + + else if (type[0] == 'B') + { + printf("\tpbarray(&ptr->%s%s);\n", id,p); + } + else abort(); + break; + } + } + break; + + case 18: +#line 363 "sysinfo.y" + { (yyval.s) = (yyvsp[(1) - (1)].s); } + break; + + case 19: +#line 364 "sysinfo.y" + { (yyval.s) = "INT";} + break; + + case 20: +#line 369 "sysinfo.y" + { (yyval.s) = (yyvsp[(2) - (3)].s); } + break; + + case 21: +#line 374 "sysinfo.y" + { (yyval.i) = (yyvsp[(1) - (2)].i) * (yyvsp[(2) - (2)].i); } + break; + + case 22: +#line 379 "sysinfo.y" + { (yyval.s) = (yyvsp[(2) - (3)].s); } + break; + + case 23: +#line 380 "sysinfo.y" + { (yyval.s) = "dummy";} + break; + + case 27: +#line 388 "sysinfo.y" + { + switch (writecode) + { + case 'd': + printf("#define %s %s\n", (yyvsp[(3) - (5)].s),(yyvsp[(4) - (5)].s)); + break; + case 'c': + printf("if (ptr->%s%s == %s) { tabout(); printf(\"%s\\n\");}\n", name, names[rdepth],(yyvsp[(4) - (5)].s),(yyvsp[(3) - (5)].s)); + } + } + break; + + +/* Line 1267 of yacc.c. */ +#line 1721 "sysinfo.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", + yystos[yystate], yyvsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 403 "sysinfo.y" + +/* four modes + + -d write structure definitions for sysroff in host format + -i write functions to swap into sysroff format in + -o write functions to swap into sysroff format out + -c write code to print info in human form */ + +int yydebug; + +int +main (int ac, char **av) +{ + yydebug=0; + if (ac > 1) + writecode = av[1][1]; +if (writecode == 'd') + { + printf("typedef struct { unsigned char *data; int len; } barray; \n"); + printf("typedef int INT;\n"); + printf("typedef char * CHARS;\n"); + + } + yyparse(); +return 0; +} + +static int +yyerror (char *s) +{ + fprintf(stderr, "%s\n" , s); + return 0; +} + diff --git a/binutils/sysinfo.h b/binutils/sysinfo.h new file mode 100644 index 0000000..7515e22 --- /dev/null +++ b/binutils/sysinfo.h @@ -0,0 +1,77 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + COND = 258, + REPEAT = 259, + TYPE = 260, + NAME = 261, + NUMBER = 262, + UNIT = 263 + }; +#endif +/* Tokens. */ +#define COND 258 +#define REPEAT 259 +#define TYPE 260 +#define NAME 261 +#define NUMBER 262 +#define UNIT 263 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 40 "sysinfo.y" +{ + int i; + char *s; +} +/* Line 1529 of yacc.c. */ +#line 70 "sysinfo.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + diff --git a/binutils/syslex.c b/binutils/syslex.c new file mode 100644 index 0000000..5f17830 --- /dev/null +++ b/binutils/syslex.c @@ -0,0 +1,1939 @@ + +#line 3 "syslex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 35 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <stdlib.h> + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include <inttypes.h> +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + yy_size_t yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 25 +#define YY_END_OF_BUFFER 26 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[81] = + { 0, + 0, 0, 26, 25, 7, 8, 5, 25, 1, 2, + 11, 11, 6, 3, 4, 25, 25, 25, 25, 25, + 25, 25, 0, 9, 11, 0, 6, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, + 13, 0, 0, 0, 0, 16, 0, 0, 0, 0, + 0, 12, 15, 0, 23, 0, 0, 0, 0, 0, + 0, 14, 18, 0, 0, 0, 0, 0, 17, 0, + 24, 0, 0, 0, 20, 22, 0, 21, 19, 0 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 1, 5, 1, 1, 1, 1, 1, 6, + 7, 1, 1, 1, 1, 1, 1, 8, 9, 9, + 9, 9, 9, 9, 9, 9, 9, 1, 10, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 11, 1, 12, 1, 1, 1, 13, 14, 15, 16, + + 17, 18, 19, 20, 21, 1, 1, 22, 1, 23, + 24, 25, 1, 26, 27, 28, 29, 30, 1, 31, + 32, 33, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[34] = + { 0, + 1, 1, 2, 1, 1, 1, 1, 3, 3, 1, + 1, 1, 3, 3, 3, 3, 3, 3, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1 + } ; + +static yyconst flex_int16_t yy_base[84] = + { 0, + 0, 0, 100, 101, 101, 101, 101, 94, 101, 101, + 26, 28, 0, 101, 101, 82, 26, 18, 74, 79, + 78, 81, 88, 101, 32, 0, 0, 76, 65, 62, + 61, 75, 20, 59, 61, 66, 58, 0, 57, 56, + 54, 63, 53, 62, 54, 101, 59, 48, 53, 46, + 59, 101, 44, 43, 101, 41, 55, 46, 53, 44, + 31, 101, 101, 39, 27, 21, 39, 19, 101, 35, + 101, 33, 26, 29, 101, 101, 28, 101, 101, 101, + 58, 61, 41 + } ; + +static yyconst flex_int16_t yy_def[84] = + { 0, + 80, 1, 80, 80, 80, 80, 80, 81, 80, 80, + 80, 80, 82, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 81, 80, 80, 83, 82, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 83, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 0, + 80, 80, 80 + } ; + +static yyconst flex_int16_t yy_nxt[135] = + { 0, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, + 14, 15, 16, 17, 18, 4, 4, 4, 4, 4, + 19, 4, 4, 4, 4, 20, 21, 4, 4, 22, + 4, 4, 4, 25, 25, 25, 25, 32, 29, 25, + 25, 33, 44, 38, 79, 78, 30, 77, 45, 76, + 75, 74, 73, 72, 71, 70, 26, 31, 23, 23, + 23, 27, 69, 27, 68, 67, 66, 65, 64, 63, + 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, + 52, 51, 50, 49, 48, 47, 46, 43, 42, 41, + 40, 39, 24, 37, 36, 35, 34, 28, 24, 80, + + 3, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80 + } ; + +static yyconst flex_int16_t yy_chk[135] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 11, 11, 12, 12, 18, 17, 25, + 25, 18, 33, 83, 77, 74, 17, 73, 33, 72, + 70, 68, 67, 66, 65, 64, 11, 17, 81, 81, + 81, 82, 61, 82, 60, 59, 58, 57, 56, 54, + 53, 51, 50, 49, 48, 47, 45, 44, 43, 42, + 41, 40, 39, 37, 36, 35, 34, 32, 31, 30, + 29, 28, 23, 22, 21, 20, 19, 16, 8, 3, + + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80 + } ; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "syslex.l" +#line 2 "syslex.l" +/* Copyright 2001, 2003, 2005, 2007 Free Software Foundation, Inc. + + This file is part of GNU Binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GLD; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include "config.h" +#ifdef HAVE_STRING_H +#include <string.h> +#else +#ifdef HAVE_STRINGS_H +#include <strings.h> +#endif +#endif +#include "sysinfo.h" + +#define YY_NO_UNPUT + +#ifndef yywrap +static int yywrap (void) { return 1; } +#endif + +extern int yylex (void); +#line 538 "syslex.c" + +#define INITIAL 0 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include <unistd.h> +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +yy_size_t yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + + static void yyunput (int c,char *buf_ptr ); + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + yy_size_t n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 39 "syslex.l" + +#line 722 "syslex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 81 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 101 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +YY_RULE_SETUP +#line 40 "syslex.l" +{ return '(';} + YY_BREAK +case 2: +YY_RULE_SETUP +#line 41 "syslex.l" +{ return ')';} + YY_BREAK +case 3: +YY_RULE_SETUP +#line 42 "syslex.l" +{ return '[';} + YY_BREAK +case 4: +YY_RULE_SETUP +#line 43 "syslex.l" +{ return ']';} + YY_BREAK +case 5: +YY_RULE_SETUP +#line 44 "syslex.l" +{ ; } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 45 "syslex.l" +{ ; } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 46 "syslex.l" +{ ; } + YY_BREAK +case 8: +/* rule 8 can match eol */ +YY_RULE_SETUP +#line 47 "syslex.l" +{ ; } + YY_BREAK +case 9: +/* rule 9 can match eol */ +YY_RULE_SETUP +#line 48 "syslex.l" +{ + yylval.s = malloc (yyleng - 1); + memcpy (yylval.s, yytext + 1, yyleng - 2); + yylval.s[yyleng - 2] = '\0'; + return NAME; + } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 55 "syslex.l" +{ + yylval.i = strtol(yytext,0,16); + return NUMBER; + } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 60 "syslex.l" +{ + yylval.i = atoi(yytext); + return NUMBER; + } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 66 "syslex.l" +{ yylval.i =1 ;return UNIT;} + YY_BREAK +case 13: +YY_RULE_SETUP +#line 67 "syslex.l" +{ yylval.i = 1; return UNIT;} + YY_BREAK +case 14: +YY_RULE_SETUP +#line 68 "syslex.l" +{ yylval.i= 8; return UNIT;} + YY_BREAK +case 15: +YY_RULE_SETUP +#line 69 "syslex.l" +{ yylval.i = 8; return UNIT;} + YY_BREAK +case 16: +YY_RULE_SETUP +#line 71 "syslex.l" +{ yylval.s = "INT"; return TYPE;} + YY_BREAK +case 17: +YY_RULE_SETUP +#line 72 "syslex.l" +{ yylval.s = "BARRAY"; return TYPE;} + YY_BREAK +case 18: +YY_RULE_SETUP +#line 73 "syslex.l" +{ yylval.s = "CHARS"; return TYPE;} + YY_BREAK +case 19: +YY_RULE_SETUP +#line 74 "syslex.l" +{ yylval.i = 0; return NUMBER;} + YY_BREAK +case 20: +YY_RULE_SETUP +#line 75 "syslex.l" +{ yylval.i = -4; return NUMBER;} + YY_BREAK +case 21: +YY_RULE_SETUP +#line 76 "syslex.l" +{ yylval.i = -2; return NUMBER; } + YY_BREAK +case 22: +YY_RULE_SETUP +#line 77 "syslex.l" +{ yylval.i = -1; return NUMBER; } + YY_BREAK +case 23: +YY_RULE_SETUP +#line 78 "syslex.l" +{ return COND;} + YY_BREAK +case 24: +YY_RULE_SETUP +#line 79 "syslex.l" +{ return REPEAT;} + YY_BREAK +case 25: +YY_RULE_SETUP +#line 80 "syslex.l" +ECHO; + YY_BREAK +#line 943 "syslex.c" +case YY_STATE_EOF(INITIAL): + yyterminate(); + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + yy_size_t num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + yy_size_t new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 81 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 81 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 80); + + return yy_is_jam ? 0 : yy_current_state; +} + + static void yyunput (int c, register char * yy_bp ) +{ + register char *yy_cp; + + yy_cp = (yy_c_buf_p); + + /* undo effects of setting up yytext */ + *yy_cp = (yy_hold_char); + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + { /* need to shift things up to make room */ + /* +2 for EOB chars. */ + register yy_size_t number_to_move = (yy_n_chars) + 2; + register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ + YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; + register char *source = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; + + while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + *--dest = *--source; + + yy_cp += (int) (dest - source); + yy_bp += (int) (dest - source); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + YY_FATAL_ERROR( "flex scanner push-back overflow" ); + } + + *--yy_cp = (char) c; + + (yytext_ptr) = yy_bp; + (yy_hold_char) = *yy_cp; + (yy_c_buf_p) = yy_cp; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return 0; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + yy_size_t num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n, i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +yy_size_t yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 80 "syslex.l" |