aboutsummaryrefslogtreecommitdiff
path: root/bfd/reloc.c
diff options
context:
space:
mode:
Diffstat (limited to 'bfd/reloc.c')
-rw-r--r--bfd/reloc.c94
1 files changed, 47 insertions, 47 deletions
diff --git a/bfd/reloc.c b/bfd/reloc.c
index 7ffe381..c2485b9 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -25,7 +25,7 @@ SECTION
BFD maintains relocations in much the same way it maintains
symbols: they are left alone until required, then read in
- en-mass and translated into an internal form. A common
+ en-masse and translated into an internal form. A common
routine <<bfd_perform_relocation>> acts upon the
canonical form to do the fixup.
@@ -359,7 +359,7 @@ CODE_FRAGMENT
.
. {* The src_mask selects which parts of the read in data
. are to be used in the relocation sum. E.g., if this was an 8 bit
-. bit of data which we read and relocated, this would be
+. byte of data which we read and relocated, this would be
. 0x000000ff. When we have relocs which have an addend, such as
. sun4 extended relocs, the value in the offset part of a
. relocating field is garbage so we never use it. In this case
@@ -885,23 +885,23 @@ space consuming. For each target:
R result
Do this:
- i i i i i o o o o o from bfd_get<size>
- and S S S S S to get the size offset we want
- + r r r r r r r r r r to get the final value to place
+ (( i i i i i o o o o o from bfd_get<size>
+ and S S S S S) to get the size offset we want
+ + r r r r r r r r r r) to get the final value to place
and D D D D D to chop to right size
-----------------------
- A A A A A
+ = A A A A A
And this:
- ... i i i i i o o o o o from bfd_get<size>
- and N N N N N get instruction
+ ( i i i i i o o o o o from bfd_get<size>
+ and N N N N N ) get instruction
-----------------------
- ... B B B B B
+ = B B B B B
And then:
- B B B B B
- or A A A A A
+ ( B B B B B
+ or A A A A A)
-----------------------
- R R R R R R R R R R put into bfd_put<size>
+ = R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
@@ -1028,7 +1028,7 @@ bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset,
if (howto->special_function)
{
bfd_reloc_status_type cont;
-
+
/* XXX - The special_function calls haven't been fixed up to deal
with creating new relocations and section contents. */
cont = howto->special_function (abfd, reloc_entry, symbol,
@@ -1275,23 +1275,23 @@ space consuming. For each target:
R result
Do this:
- i i i i i o o o o o from bfd_get<size>
- and S S S S S to get the size offset we want
- + r r r r r r r r r r to get the final value to place
+ (( i i i i i o o o o o from bfd_get<size>
+ and S S S S S) to get the size offset we want
+ + r r r r r r r r r r) to get the final value to place
and D D D D D to chop to right size
-----------------------
- A A A A A
+ = A A A A A
And this:
- ... i i i i i o o o o o from bfd_get<size>
- and N N N N N get instruction
+ ( i i i i i o o o o o from bfd_get<size>
+ and N N N N N ) get instruction
-----------------------
- ... B B B B B
+ = B B B B B
And then:
- B B B B B
- or A A A A A
+ ( B B B B B
+ or A A A A A)
-----------------------
- R R R R R R R R R R put into bfd_put<size>
+ = R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
@@ -1504,7 +1504,7 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
if ((b & signmask) != 0)
{
/* Set all the bits above the sign bit. */
- b -= signmask <<= 1;
+ b -= signmask << 1;
}
b = (b & addrmask) >> bitpos;
@@ -1560,7 +1560,7 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
If the field is signed and a is -4095 (0x1001) and b is
-1 (0x1fff), the sum is -4096 (0x1000), but (0x1001 +
0x1fff is 0x3000). It's not clear how to handle this
- everywhere, since there is not way to know how many bits
+ everywhere, since there is no way to know how many bits
are significant in the relocation, but the original code
assumed that it was fully sign extended, and we will keep
that assumption. */
@@ -1570,7 +1570,7 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
{
/* Some bits out of the field are set. This might not
be a problem: if this is a signed bitfield, it is OK
- iff all the high bits are set, including the sign
+ if all the high bits are set, including the sign
bit. We'll try setting all but the most significant
bit in the original relocation value: if this is all
ones, we are OK, assuming a signed bitfield. */
@@ -1594,9 +1594,9 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
sum = a + b;
if (sum < a || (sum & ~ fieldmask) != 0)
{
- /* There was a carry out, or the field overflow. Test
- for signed operands again. Here is the overflow test
- is as for complain_overflow_signed. */
+ /* There was a carry out, or the field overflowed. Test
+ for signed operands again. Here the overflow test is
+ as for complain_overflow_signed. */
if (((~ (a ^ b)) & (a ^ sum)) & signmask)
overflow = true;
}
@@ -2152,7 +2152,7 @@ ENUMX
BFD_RELOC_PJ_CODE_REL32
ENUMDOC
Picojava relocs. Not all of these appear in object files.
-
+
ENUM
BFD_RELOC_PPC_B26
ENUMX
@@ -2385,46 +2385,46 @@ ENUMDOC
ENUM
BFD_RELOC_D30V_9_PCREL
ENUMDOC
- This is a 6-bit pc-relative reloc with
- the right 3 bits assumed to be 0.
+ This is a 6-bit pc-relative reloc with
+ the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_9_PCREL_R
ENUMDOC
- This is a 6-bit pc-relative reloc with
+ This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
- of the container.
+ of the container.
ENUM
BFD_RELOC_D30V_15
ENUMDOC
- This is a 12-bit absolute reloc with the
- right 3 bitsassumed to be 0.
+ This is a 12-bit absolute reloc with the
+ right 3 bitsassumed to be 0.
ENUM
BFD_RELOC_D30V_15_PCREL
ENUMDOC
- This is a 12-bit pc-relative reloc with
- the right 3 bits assumed to be 0.
+ This is a 12-bit pc-relative reloc with
+ the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_15_PCREL_R
ENUMDOC
- This is a 12-bit pc-relative reloc with
+ This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
- of the container.
+ of the container.
ENUM
BFD_RELOC_D30V_21
ENUMDOC
- This is an 18-bit absolute reloc with
+ This is an 18-bit absolute reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_21_PCREL
ENUMDOC
- This is an 18-bit pc-relative reloc with
+ This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_21_PCREL_R
ENUMDOC
- This is an 18-bit pc-relative reloc with
+ This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
@@ -2606,7 +2606,7 @@ ENUM
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
short offset into 11 bits.
-
+
ENUM
BFD_RELOC_MCORE_PCREL_IMM8BY4
ENUMX
@@ -2621,13 +2621,13 @@ ENUMX
BFD_RELOC_MCORE_RVA
ENUMDOC
Motorola Mcore relocations.
-
+
ENUM
BFD_RELOC_VTABLE_INHERIT
ENUMX
BFD_RELOC_VTABLE_ENTRY
ENUMDOC
- These two relocations are used by the linker to determine which of
+ These two relocations are used by the linker to determine which of
the entries in a C++ virtual function table are actually used. When
the --gc-sections option is given, the linker will zero out the entries
that are not used, so that the code for those functions need not be
@@ -2641,7 +2641,7 @@ ENUMDOC
VTABLE_ENTRY is a zero-space relocation that describes the use of a
virtual function table entry. The reloc's symbol should refer to the
table of the class mentioned in the code. Off of that base, an offset
- describes the entry that is being used. For Rela hosts, this offset
+ describes the entry that is being used. For Rela hosts, this offset
is stored in the reloc's addend. For Rel hosts, we are forced to put
this offset in the reloc's section offset.