diff options
90 files changed, 712 insertions, 699 deletions
diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog index fbbf562..b16bb61 100644 --- a/sim/aarch64/ChangeLog +++ b/sim/aarch64/ChangeLog @@ -1,3 +1,7 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * interp.c (sim_dis_read): Change private_data to application_data. diff --git a/sim/aarch64/configure b/sim/aarch64/configure index d909324..219d770 100755 --- a/sim/aarch64/configure +++ b/sim/aarch64/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13010,9 +13010,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13246,12 +13246,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index 024f52e..f6989e9 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,8 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (sim_store_register): Rename to ... diff --git a/sim/arm/configure b/sim/arm/configure index d46ffcb..3fd5d8c 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/arm/wrapper.c b/sim/arm/wrapper.c index 81fb21f..3938f3c 100644 --- a/sim/arm/wrapper.c +++ b/sim/arm/wrapper.c @@ -140,7 +140,7 @@ init (void) { ARMul_EmulateInit (); state = ARMul_NewState (); - state->bigendSig = (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN ? HIGH : LOW); + state->bigendSig = (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? HIGH : LOW); ARMul_MemoryInit (state, mem_size); ARMul_OSInit (state); state->verbose = 0; diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog index d0f63e5..5fcbea1 100644 --- a/sim/avr/ChangeLog +++ b/sim/avr/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * Makefile.in (SIM_OBJS): Delete sim-hload.o. diff --git a/sim/avr/configure b/sim/avr/configure index fded283..001142f 100755 --- a/sim/avr/configure +++ b/sim/avr/configure @@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/avr/configure.ac b/sim/avr/configure.ac index a487225..0857787 100644 --- a/sim/avr/configure.ac +++ b/sim/avr/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_ENVIRONMENT diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog index cc1b3cc..6844035 100644 --- a/sim/bfin/ChangeLog +++ b/sim/bfin/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * Makefile.in (SIM_OBJS): Delete sim-hload.o. diff --git a/sim/bfin/configure b/sim/bfin/configure index 8edee25..9b8dd5d 100755 --- a/sim/bfin/configure +++ b/sim/bfin/configure @@ -12935,31 +12935,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12969,10 +12969,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13029,9 +13029,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13265,12 +13265,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/bfin/configure.ac b/sim/bfin/configure.ac index 31cd159..5ae3b81 100644 --- a/sim/bfin/configure.ac +++ b/sim/bfin/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_DEFAULT_MODEL(bf537) diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 65a0abf..6991786 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,5 +1,46 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * acinclude.m4 (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to + BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to + BFD_ENDIAN_UNKNOWN. + (SIM_AC_OPTION_HOSTENDIAN): Likewise. + * cgen-ops.h (SUBWORDXFSI): Change BIG_ENDIAN to BFD_ENDIAN_BIG. + (SUBWORDTFSI, JOINSIDF, JOINSIXF, JOINSITF): Likewise. + * nrun.c (main): Likewise. + * sim-config.c (current_host_byte_order): Change type to enum + bfd_endian. Initialize to BFD_ENDIAN_UNKNOWN. + (current_target_byte_order): Likewise. + (config_byte_order_to_a): Likewise. Change BIG_ENDIAN to + BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to + BFD_ENDIAN_UNKNOWN. + (sim_config): Change prefered_target_byte_order type to enum + bfd_endian. Change BIG_ENDIAN to BFD_ENDIAN_BIG, LITTLE_ENDIAN + to BFD_ENDIAN_LITTLE, and 0 to BFD_ENDIAN_UNKNOWN. + * sim-config.h: Change BIG_ENDIAN to BFD_ENDIAN_BIG, LITTLE_ENDIAN + to BFD_ENDIAN_LITTLE, and 0 to BFD_ENDIAN_UNKNOWN. + Delete all the various arch/OS endian includes & defines. + (current_host_byte_order): Change type to enum bfd_endian. + (current_target_byte_order): Likewise. + (CURRENT_HOST_BYTE_ORDER): Compare to BFD_ENDIAN_UNKNOWN, not 0. + (CURRENT_TARGET_BYTE_ORDER): Likewise. + * sim-endian.c: Change LITTLE_ENDIAN to BFD_ENDIAN_LITTLE. + * sim-events.c (sim_events_watch_sim): Change BIG_ENDIAN to + BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to + BFD_ENDIAN_UNKNOWN. + (sim_events_watch_core): Likewise. + * sim-events.h: Likewise. + * sim-n-core.h (sim_core_read_misaligned_N): Change BIG_ENDIAN to + BFD_ENDIAN_BIG. + (sim_core_write_misaligned_N): Likewise. + * sim-n-endian.h (endian_h2be_N): Likewise. + (endian_be2h_N): Likewise. + (endian_h2le_N): Change LITTLE_ENDIAN to BFD_ENDIAN_LITTLE. + (offset_N): Likewise. + * sim-options.c (standard_option_handler): Change LITTLE_ENDIAN to + BFD_ENDIAN_LITTLE and BIG_ENDIAN to BFD_ENDIAN_BIG. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * cgen-defs.h (current_state): Delete. * sim-base.h (CURRENT_STATE_REG, CURRENT_STATE): Delete. * sim-utils.c (current_state): Delete. diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4 index ebb6d1b..2af6d5d 100644 --- a/sim/common/acinclude.m4 +++ b/sim/common/acinclude.m4 @@ -449,26 +449,26 @@ AC_ARG_ENABLE(sim-endian, [AS_HELP_STRING([--enable-sim-endian=endian], [Specify target byte endian orientation])], [case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";; @@ -477,10 +477,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then echo "Setting endian flags = $sim_endian" 6>&1 fi], [if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -498,9 +498,9 @@ AC_ARG_ENABLE(sim-hostendian, [AS_HELP_STRING([--enable-sim-hostendian=end], [Specify host byte endian orientation])], [case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -509,12 +509,12 @@ fi],[ if test "x$cross_compiling" = "xno"; then AC_C_BIGENDIAN if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi])dnl ]) AC_SUBST(sim_hostendian) diff --git a/sim/common/cgen-ops.h b/sim/common/cgen-ops.h index 9256d8b..7ff1b4d 100644 --- a/sim/common/cgen-ops.h +++ b/sim/common/cgen-ops.h @@ -404,7 +404,7 @@ SUBWORDXFSI (XF in, int word) /* Note: typedef struct { SI parts[3]; } XF; */ union { XF in; SI out[3]; } x; x.in = in; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) return x.out[word]; else return x.out[2 - word]; @@ -416,7 +416,7 @@ SUBWORDTFSI (TF in, int word) /* Note: typedef struct { SI parts[4]; } TF; */ union { TF in; SI out[4]; } x; x.in = in; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) return x.out[word]; else return x.out[3 - word]; @@ -432,7 +432,7 @@ SEMOPS_INLINE DF JOINSIDF (SI x0, SI x1) { union { SI in[2]; DF out; } x; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) x.in[0] = x0, x.in[1] = x1; else x.in[1] = x0, x.in[0] = x1; @@ -443,7 +443,7 @@ SEMOPS_INLINE XF JOINSIXF (SI x0, SI x1, SI x2) { union { SI in[3]; XF out; } x; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) x.in[0] = x0, x.in[1] = x1, x.in[2] = x2; else x.in[2] = x0, x.in[1] = x1, x.in[0] = x2; @@ -454,7 +454,7 @@ SEMOPS_INLINE TF JOINSITF (SI x0, SI x1, SI x2, SI x3) { union { SI in[4]; TF out; } x; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) x.in[0] = x0, x.in[1] = x1, x.in[2] = x2, x.in[3] = x3; else x.in[3] = x0, x.in[2] = x1, x.in[1] = x2, x.in[0] = x3; diff --git a/sim/common/nrun.c b/sim/common/nrun.c index 61c3c04..2e47715 100644 --- a/sim/common/nrun.c +++ b/sim/common/nrun.c @@ -99,7 +99,7 @@ main (int argc, char **argv) /* We can't set the endianness in the callback structure until sim_config is called, which happens in sim_open. */ default_callback.target_endian - = (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN + = (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE); /* Was there a program to run? */ diff --git a/sim/common/sim-config.c b/sim/common/sim-config.c index ff20983..8e9b1dd 100644 --- a/sim/common/sim-config.c +++ b/sim/common/sim-config.c @@ -25,8 +25,8 @@ #include "bfd.h" -int current_host_byte_order; -int current_target_byte_order; +enum bfd_endian current_host_byte_order = BFD_ENDIAN_UNKNOWN; +enum bfd_endian current_target_byte_order = BFD_ENDIAN_UNKNOWN; int current_stdio; enum sim_alignments current_alignment; @@ -40,16 +40,16 @@ int current_floating_point; /* map a byte order onto a textual string */ static const char * -config_byte_order_to_a (int byte_order) +config_byte_order_to_a (enum bfd_endian byte_order) { switch (byte_order) { - case LITTLE_ENDIAN: + case BFD_ENDIAN_LITTLE: return "LITTLE_ENDIAN"; - case BIG_ENDIAN: + case BFD_ENDIAN_BIG: return "BIG_ENDIAN"; - case 0: - return "0"; + case BFD_ENDIAN_UNKNOWN: + return "UNKNOWN_ENDIAN"; } return "UNKNOWN"; } @@ -140,7 +140,7 @@ sim_config_default (SIM_DESC sd) SIM_RC sim_config (SIM_DESC sd) { - int prefered_target_byte_order; + enum bfd_endian prefered_target_byte_order; SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER); /* extract all relevant information */ @@ -149,18 +149,18 @@ sim_config (SIM_DESC sd) "--architecture"), it'll have no endianness. */ || (!bfd_little_endian (STATE_PROG_BFD (sd)) && !bfd_big_endian (STATE_PROG_BFD (sd)))) - prefered_target_byte_order = 0; + prefered_target_byte_order = BFD_ENDIAN_UNKNOWN; else prefered_target_byte_order = (bfd_little_endian (STATE_PROG_BFD (sd)) - ? LITTLE_ENDIAN - : BIG_ENDIAN); + ? BFD_ENDIAN_LITTLE + : BFD_ENDIAN_BIG); /* set the host byte order */ current_host_byte_order = 1; if (*(char*)(¤t_host_byte_order)) - current_host_byte_order = LITTLE_ENDIAN; + current_host_byte_order = BFD_ENDIAN_LITTLE; else - current_host_byte_order = BIG_ENDIAN; + current_host_byte_order = BFD_ENDIAN_BIG; /* verify the host byte order */ if (CURRENT_HOST_BYTE_ORDER != current_host_byte_order) @@ -174,22 +174,22 @@ sim_config (SIM_DESC sd) /* set the target byte order */ #if (WITH_TREE_PROPERTIES) - if (current_target_byte_order == 0) + if (current_target_byte_order == BFD_ENDIAN_UNKNOWN) current_target_byte_order = (tree_find_boolean_property (root, "/options/little-endian?") - ? LITTLE_ENDIAN - : BIG_ENDIAN); + ? BFD_ENDIAN_LITTLE + : BFD_ENDIAN_BIG); #endif - if (current_target_byte_order == 0 - && prefered_target_byte_order != 0) + if (current_target_byte_order == BFD_ENDIAN_UNKNOWN + && prefered_target_byte_order != BFD_ENDIAN_UNKNOWN) current_target_byte_order = prefered_target_byte_order; - if (current_target_byte_order == 0) + if (current_target_byte_order == BFD_ENDIAN_UNKNOWN) current_target_byte_order = WITH_TARGET_BYTE_ORDER; - if (current_target_byte_order == 0) + if (current_target_byte_order == BFD_ENDIAN_UNKNOWN) current_target_byte_order = WITH_DEFAULT_TARGET_BYTE_ORDER; /* verify the target byte order */ - if (CURRENT_TARGET_BYTE_ORDER == 0) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_UNKNOWN) { sim_io_eprintf (sd, "Target byte order unspecified\n"); return SIM_RC_FAIL; @@ -198,7 +198,7 @@ sim_config (SIM_DESC sd) sim_io_eprintf (sd, "Target (%s) and configured (%s) byte order in conflict\n", config_byte_order_to_a (current_target_byte_order), config_byte_order_to_a (CURRENT_TARGET_BYTE_ORDER)); - if (prefered_target_byte_order != 0 + if (prefered_target_byte_order != BFD_ENDIAN_UNKNOWN && CURRENT_TARGET_BYTE_ORDER != prefered_target_byte_order) sim_io_eprintf (sd, "Target (%s) and specified (%s) byte order in conflict\n", config_byte_order_to_a (CURRENT_TARGET_BYTE_ORDER), diff --git a/sim/common/sim-config.h b/sim/common/sim-config.h index a5a8950..fbd9b25 100644 --- a/sim/common/sim-config.h +++ b/sim/common/sim-config.h @@ -30,181 +30,19 @@ particular it defines the macro's: WITH_HOST_BYTE_ORDER The byte order of the host. Could - be any of LITTLE_ENDIAN, BIG_ENDIAN - or 0 (unknown). Those macro's also + be any of BFD_ENDIAN_LITTLE, BFD_ENDIAN_BIG, + or BFD_ENDIAN_UNKNOWN. Those macro's also need to be defined. */ -/* NetBSD: - - NetBSD is easy, everything you could ever want is in a header file - (well almost :-) */ - -#if defined(__NetBSD__) -# include <machine/endian.h> -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BYTE_ORDER -# endif -# if (BYTE_ORDER != WITH_HOST_BYTE_ORDER) -# error "host endian incorrectly configured, check config.h" -# endif -#endif - -/* Linux is similarly easy. */ - -#if defined(__linux__) -# include <endian.h> -# if defined(__LITTLE_ENDIAN) && !defined(LITTLE_ENDIAN) -# define LITTLE_ENDIAN __LITTLE_ENDIAN -# endif -# if defined(__BIG_ENDIAN) && !defined(BIG_ENDIAN) -# define BIG_ENDIAN __BIG_ENDIAN -# endif -# if defined(__BYTE_ORDER) && !defined(BYTE_ORDER) -# define BYTE_ORDER __BYTE_ORDER -# endif -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BYTE_ORDER -# endif -# if (BYTE_ORDER != WITH_HOST_BYTE_ORDER) -# error "host endian incorrectly configured, check config.h" -# endif -#endif - -/* INSERT HERE - hosts that have available LITTLE_ENDIAN and - BIG_ENDIAN macro's */ - - -/* Some hosts don't define LITTLE_ENDIAN or BIG_ENDIAN, help them out */ - -#ifndef LITTLE_ENDIAN -#define LITTLE_ENDIAN 1234 -#endif -#ifndef BIG_ENDIAN -#define BIG_ENDIAN 4321 -#endif - - -/* SunOS on SPARC: - - Big endian last time I looked */ - -#if defined(sparc) || defined(__sparc__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BIG_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) -# error "sun was big endian last time I looked ..." -# endif -#endif - - -/* Random x86 - - Little endian last time I looked */ - -#if defined(i386) || defined(i486) || defined(i586) || defined (i686) || defined(__i386__) || defined(__i486__) || defined(__i586__) || defined (__i686__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) -# error "x86 was little endian last time I looked ..." -# endif -#endif - #if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP #undef htonl #undef ntohl #define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) #define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) #endif - -/* Power or PowerPC running AIX */ -#if defined(_POWER) && defined(_AIX) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BIG_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) -# error "Power/PowerPC AIX was big endian last time I looked ..." -# endif -#endif - -/* Solaris running PowerPC */ -#if defined(__PPC) && defined(__sun__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) -# error "Solaris on PowerPCs was little endian last time I looked ..." -# endif -#endif - -/* HP/PA */ -#if defined(__hppa__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BIG_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) -# error "HP/PA was big endian last time I looked ..." -# endif -#endif - -/* Big endian MIPS */ -#if defined(__MIPSEB__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER BIG_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) -# error "MIPSEB was big endian last time I looked ..." -# endif -#endif - -/* Little endian MIPS */ -#if defined(__MIPSEL__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) -# error "MIPSEL was little endian last time I looked ..." -# endif -#endif - -/* Windows NT */ -#if defined(__WIN32__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) -# error "Windows NT was little endian last time I looked ..." -# endif -#endif - -/* Alpha running DEC unix */ -#if defined(__osf__) && defined(__alpha__) -# if (WITH_HOST_BYTE_ORDER == 0) -# undef WITH_HOST_BYTE_ORDER -# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN -# endif -# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) -# error "AXP running DEC unix was little endian last time I looked ..." -# endif -#endif - - -/* INSERT HERE - additional hosts that do not have LITTLE_ENDIAN and - BIG_ENDIAN definitions available. */ /* Until devices and tree properties are sorted out, tell sim-config.c not to call the tree_find_foo fns. */ @@ -217,28 +55,28 @@ of the host/target it is able to eliminate slower generic endian handling code. - Possible values are 0 (unknown), LITTLE_ENDIAN, BIG_ENDIAN */ + Possible values are BFD_ENDIAN_UNKNOWN, BFD_ENDIAN_LITTLE, BFD_ENDIAN_BIG. */ #ifndef WITH_HOST_BYTE_ORDER -#define WITH_HOST_BYTE_ORDER 0 /*unknown*/ +#define WITH_HOST_BYTE_ORDER BFD_ENDIAN_UNKNOWN #endif #ifndef WITH_TARGET_BYTE_ORDER -#define WITH_TARGET_BYTE_ORDER 0 /*unknown*/ +#define WITH_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN #endif #ifndef WITH_DEFAULT_TARGET_BYTE_ORDER -#define WITH_DEFAULT_TARGET_BYTE_ORDER 0 /* fatal */ +#define WITH_DEFAULT_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN #endif -extern int current_host_byte_order; -#define CURRENT_HOST_BYTE_ORDER (WITH_HOST_BYTE_ORDER \ - ? WITH_HOST_BYTE_ORDER \ - : current_host_byte_order) -extern int current_target_byte_order; -#define CURRENT_TARGET_BYTE_ORDER (WITH_TARGET_BYTE_ORDER \ - ? WITH_TARGET_BYTE_ORDER \ - : current_target_byte_order) +extern enum bfd_endian current_host_byte_order; +#define CURRENT_HOST_BYTE_ORDER \ + (WITH_HOST_BYTE_ORDER != BFD_ENDIAN_UNKNOWN \ + ? WITH_HOST_BYTE_ORDER : current_host_byte_order) +extern enum bfd_endian current_target_byte_order; +#define CURRENT_TARGET_BYTE_ORDER \ + (WITH_TARGET_BYTE_ORDER != BFD_ENDIAN_UNKNOWN \ + ? WITH_TARGET_BYTE_ORDER : current_target_byte_order) diff --git a/sim/common/sim-endian.c b/sim/common/sim-endian.c index a699577..e8ef534 100644 --- a/sim/common/sim-endian.c +++ b/sim/common/sim-endian.c @@ -31,7 +31,7 @@ #define _SWAP_1(SET,RAW) SET (RAW) #endif -#if !defined(_SWAP_2) && (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN) && defined(htons) +#if !defined(_SWAP_2) && (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) && defined(htons) #define _SWAP_2(SET,RAW) SET htons (RAW) #endif @@ -39,7 +39,7 @@ #define _SWAP_2(SET,RAW) SET (((RAW) >> 8) | ((RAW) << 8)) #endif -#if !defined(_SWAP_4) && (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN) && defined(htonl) +#if !defined(_SWAP_4) && (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) && defined(htonl) #define _SWAP_4(SET,RAW) SET htonl (RAW) #endif @@ -93,7 +93,7 @@ INLINE_SIM_ENDIAN\ (unsigned_8) sim_endian_split_16 (unsigned_16 word, int w) { - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { return word.a[1 - w]; } @@ -110,7 +110,7 @@ sim_endian_join_16 (unsigned_8 h, unsigned_8 l) { unsigned_16 word; - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { word.a[0] = l; word.a[1] = h; diff --git a/sim/common/sim-events.c b/sim/common/sim-events.c index f29e40c..54d75c2 100644 --- a/sim/common/sim-events.c +++ b/sim/common/sim-events.c @@ -635,7 +635,7 @@ sim_events_watch_sim (SIM_DESC sd, /* type */ switch (byte_order) { - case 0: + case BFD_ENDIAN_UNKNOWN: switch (nr_bytes) { case 1: new_event->watching = watch_sim_host_1; break; @@ -645,7 +645,7 @@ sim_events_watch_sim (SIM_DESC sd, default: sim_io_error (sd, "sim_events_watch_sim - invalid nr bytes"); } break; - case BIG_ENDIAN: + case BFD_ENDIAN_BIG: switch (nr_bytes) { case 1: new_event->watching = watch_sim_be_1; break; @@ -655,7 +655,7 @@ sim_events_watch_sim (SIM_DESC sd, default: sim_io_error (sd, "sim_events_watch_sim - invalid nr bytes"); } break; - case LITTLE_ENDIAN: + case BFD_ENDIAN_LITTLE: switch (nr_bytes) { case 1: new_event->watching = watch_sim_le_1; break; @@ -714,7 +714,7 @@ sim_events_watch_core (SIM_DESC sd, /* type */ switch (byte_order) { - case 0: + case BFD_ENDIAN_UNKNOWN: switch (nr_bytes) { case 1: new_event->watching = watch_core_targ_1; break; @@ -724,7 +724,7 @@ sim_events_watch_core (SIM_DESC sd, default: sim_io_error (sd, "sim_events_watch_core - invalid nr bytes"); } break; - case BIG_ENDIAN: + case BFD_ENDIAN_BIG: switch (nr_bytes) { case 1: new_event->watching = watch_core_be_1; break; @@ -734,7 +734,7 @@ sim_events_watch_core (SIM_DESC sd, default: sim_io_error (sd, "sim_events_watch_core - invalid nr bytes"); } break; - case LITTLE_ENDIAN: + case BFD_ENDIAN_LITTLE: switch (nr_bytes) { case 1: new_event->watching = watch_core_le_1; break; diff --git a/sim/common/sim-events.h b/sim/common/sim-events.h index 60e2046..c01cea0 100644 --- a/sim/common/sim-events.h +++ b/sim/common/sim-events.h @@ -154,7 +154,8 @@ extern sim_event *sim_events_watch_clock true. HOST_ADDR: pointer into the host address space. - BYTE_ORDER: 0 - host endian; BIG_ENDIAN; LITTLE_ENDIAN */ + BYTE_ORDER: BFD_ENDIAN_UNKNOWN - host endian; BFD_ENDIAN_BIG; + BFD_ENDIAN_LITTLE. */ extern sim_event *sim_events_watch_sim (SIM_DESC sd, @@ -173,7 +174,8 @@ extern sim_event *sim_events_watch_sim true. CORE_ADDR/MAP: pointer into the target address space. - BYTE_ORDER: 0 - current target endian; BIG_ENDIAN; LITTLE_ENDIAN */ + BYTE_ORDER: BFD_ENDIAN_UNKNOWN - host endian; BFD_ENDIAN_BIG; + BFD_ENDIAN_LITTLE. */ extern sim_event *sim_events_watch_core (SIM_DESC sd, diff --git a/sim/common/sim-n-core.h b/sim/common/sim-n-core.h index d67fb9c..0c1cb7a 100644 --- a/sim/common/sim-n-core.h +++ b/sim/common/sim-n-core.h @@ -250,7 +250,7 @@ sim_core_read_misaligned_N(sim_cpu *cpu, read_transfer, sim_core_unaligned_signal); if (CURRENT_HOST_BYTE_ORDER != CURRENT_TARGET_BYTE_ORDER) val = SWAP_M (val); - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) val >>= (M - N) * 8; PROFILE_COUNT_CORE (cpu, addr, N, map); if (TRACE_P (cpu, TRACE_CORE_IDX)) @@ -366,7 +366,7 @@ sim_core_write_misaligned_N(sim_cpu *cpu, unsigned_M val) { unsigned_M data = val; - if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) data <<= (M - N) * 8; if (CURRENT_HOST_BYTE_ORDER != CURRENT_TARGET_BYTE_ORDER) data = SWAP_M (data); diff --git a/sim/common/sim-n-endian.h b/sim/common/sim-n-endian.h index 4cfb925..ef7d2ce 100644 --- a/sim/common/sim-n-endian.h +++ b/sim/common/sim-n-endian.h @@ -81,7 +81,7 @@ INLINE_SIM_ENDIAN\ (unsigned_N) endian_h2be_N(unsigned_N raw_in) { - if (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN) { + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_BIG) { return raw_in; } else { @@ -95,7 +95,7 @@ INLINE_SIM_ENDIAN\ (unsigned_N) endian_be2h_N(unsigned_N raw_in) { - if (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN) { + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_BIG) { return raw_in; } else { @@ -109,7 +109,7 @@ INLINE_SIM_ENDIAN\ (unsigned_N) endian_h2le_N(unsigned_N raw_in) { - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) { + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { return raw_in; } else { @@ -123,7 +123,7 @@ INLINE_SIM_ENDIAN\ (unsigned_N) endian_le2h_N(unsigned_N raw_in) { - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) { + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { return raw_in; } else { @@ -145,7 +145,7 @@ offset_N (unsigned_N *x, ASSERT (offset + sizeof_word <= sizeof(unsigned_N)); ASSERT (word < (sizeof (unsigned_N) / sizeof_word)); ASSERT ((sizeof (unsigned_N) % sizeof_word) == 0); - if (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { out = in + sizeof (unsigned_N) - offset - sizeof_word; } diff --git a/sim/common/sim-options.c b/sim/common/sim-options.c index 1fca5de..e252756 100644 --- a/sim/common/sim-options.c +++ b/sim/common/sim-options.c @@ -197,23 +197,23 @@ standard_option_handler (SIM_DESC sd, sim_cpu *cpu, int opt, case OPTION_ENDIAN: if (strcmp (arg, "big") == 0) { - if (WITH_TARGET_BYTE_ORDER == LITTLE_ENDIAN) + if (WITH_TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE) { sim_io_eprintf (sd, "Simulator compiled for little endian only.\n"); return SIM_RC_FAIL; } /* FIXME:wip: Need to set something in STATE_CONFIG. */ - current_target_byte_order = BIG_ENDIAN; + current_target_byte_order = BFD_ENDIAN_BIG; } else if (strcmp (arg, "little") == 0) { - if (WITH_TARGET_BYTE_ORDER == BIG_ENDIAN) + if (WITH_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) { sim_io_eprintf (sd, "Simulator compiled for big endian only.\n"); return SIM_RC_FAIL; } /* FIXME:wip: Need to set something in STATE_CONFIG. */ - current_target_byte_order = LITTLE_ENDIAN; + current_target_byte_order = BFD_ENDIAN_LITTLE; } else { diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog index 44e24fe..130e878 100644 --- a/sim/cr16/ChangeLog +++ b/sim/cr16/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * Makefile.in (SIM_OBJS): Delete sim-hload.o. diff --git a/sim/cr16/configure b/sim/cr16/configure index 676e9a9..c538ede 100755 --- a/sim/cr16/configure +++ b/sim/cr16/configure @@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/cr16/configure.ac b/sim/cr16/configure.ac index ebf8bd3..7464e34 100644 --- a/sim/cr16/configure.ac +++ b/sim/cr16/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_ENVIRONMENT diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog index 1e28c12..79ce999 100644 --- a/sim/cris/ChangeLog +++ b/sim/cris/ChangeLog @@ -1,5 +1,12 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * sim-if.c (xprintf, eprintf): Delete. (cris_load_elf_file): Delete callback. Change xprintf to sim_io_printf and eprintf to sim_io_eprintf. diff --git a/sim/cris/arch.h b/sim/cris/arch.h index f765f4a..efd861f 100644 --- a/sim/cris/arch.h +++ b/sim/cris/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef CRIS_ARCH_H #define CRIS_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_CRISV10, MODEL_CRISV32, MODEL_MAX diff --git a/sim/cris/configure b/sim/cris/configure index be7f6fc..9914337 100755 --- a/sim/cris/configure +++ b/sim/cris/configure @@ -12942,31 +12942,31 @@ done -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12976,10 +12976,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13036,9 +13036,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13272,12 +13272,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/cris/configure.ac b/sim/cris/configure.ac index 4e6b1be..5b384a2 100644 --- a/sim/cris/configure.ac +++ b/sim/cris/configure.ac @@ -8,7 +8,7 @@ SIM_AC_COMMON # For dv-rv and rvdummy. AC_CHECK_HEADERS(sys/socket.h sys/select.h limits.h sys/param.h) -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog index 6a796bb..1a2f94f 100644 --- a/sim/d10v/ChangeLog +++ b/sim/d10v/ChangeLog @@ -1,3 +1,7 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (d10v_reg_store, d10v_reg_fetch): Define. diff --git a/sim/d10v/configure b/sim/d10v/configure index d46ffcb..3fd5d8c 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index e9a3241..fd23fe6 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2015-12-26 Mike Frysinger <vapier@gentoo.org> * config.in, configure: Regenerate. diff --git a/sim/erc32/configure b/sim/erc32/configure index 94c6fa4..d12525b 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -13034,9 +13034,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13270,12 +13270,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog index a566ba0..dd28834 100644 --- a/sim/frv/ChangeLog +++ b/sim/frv/ChangeLog @@ -1,5 +1,14 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + * frv.c (frvbf_h_fr_double_get_handler): Change LITTLE_ENDIAN to + BFD_ENDIAN_LITTLE. + (frvbf_h_fr_double_set_handler): Likewise. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * reset.c (frv_term): Change current_state to sd. * sim-if.c (current_state): Delete. (sim_open): Delete current_state assignment. diff --git a/sim/frv/arch.h b/sim/frv/arch.h index 06abe86..18d0940 100644 --- a/sim/frv/arch.h +++ b/sim/frv/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef FRV_ARCH_H #define FRV_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_FRV, MODEL_FR550, MODEL_FR500, MODEL_TOMCAT diff --git a/sim/frv/configure b/sim/frv/configure index ca3363c..40b8bdf 100755 --- a/sim/frv/configure +++ b/sim/frv/configure @@ -12918,31 +12918,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13012,9 +13012,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/frv/configure.ac b/sim/frv/configure.ac index ebaf6ab..ad73eed 100644 --- a/sim/frv/configure.ac +++ b/sim/frv/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/frv/frv.c b/sim/frv/frv.c index 2b78edb..594931f 100644 --- a/sim/frv/frv.c +++ b/sim/frv/frv.c @@ -303,7 +303,7 @@ frvbf_h_fr_double_get_handler (SIM_CPU *current_cpu, UINT fr) /* Check the register alignment. */ fr = check_fr_register_alignment (current_cpu, fr, 1); - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { value.as_sf[1] = GET_H_FR (fr); value.as_sf[0] = GET_H_FR (fr + 1); @@ -329,7 +329,7 @@ frvbf_h_fr_double_set_handler (SIM_CPU *current_cpu, UINT fr, DF newval) fr = check_fr_register_alignment (current_cpu, fr, 1); value.as_df = newval; - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { SET_H_FR (fr , value.as_sf[1]); SET_H_FR (fr + 1, value.as_sf[0]); diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog index 7164c7f..3f30164 100644 --- a/sim/ft32/ChangeLog +++ b/sim/ft32/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * Makefile.in (SIM_OBJS): Delete sim-hload.o. diff --git a/sim/ft32/configure b/sim/ft32/configure index d16b9c5..a12de76 100755 --- a/sim/ft32/configure +++ b/sim/ft32/configure @@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/ft32/configure.ac b/sim/ft32/configure.ac index 2107f74..57573d8 100644 --- a/sim/ft32/configure.ac +++ b/sim/ft32/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_ENVIRONMENT diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index 7d87d1f..2327bb4 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,8 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * compile.c (sim_state_initialize): Delete. diff --git a/sim/h8300/configure b/sim/h8300/configure index 79043dc..12b72e4 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -12894,31 +12894,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12928,10 +12928,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi diff --git a/sim/h8300/configure.ac b/sim/h8300/configure.ac index 53a02bb..3966160 100644 --- a/sim/h8300/configure.ac +++ b/sim/h8300/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) AC_CHECK_HEADERS(sys/param.h) diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog index 07c6ef6..7fbebd5 100644 --- a/sim/iq2000/ChangeLog +++ b/sim/iq2000/ChangeLog @@ -1,5 +1,11 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * sim-if.c (sim_open): Delete #if 0 sim_add_option_table call. 2016-01-02 Mike Frysinger <vapier@gentoo.org> diff --git a/sim/iq2000/arch.h b/sim/iq2000/arch.h index ab26832..3e062db 100644 --- a/sim/iq2000/arch.h +++ b/sim/iq2000/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef IQ2000_ARCH_H #define IQ2000_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_IQ2000, MODEL_MAX diff --git a/sim/iq2000/configure b/sim/iq2000/configure index 26937d3..7f6b7bf 100755 --- a/sim/iq2000/configure +++ b/sim/iq2000/configure @@ -12918,31 +12918,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13012,9 +13012,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/iq2000/configure.ac b/sim/iq2000/configure.ac index 78dcbb6..923ae92 100644 --- a/sim/iq2000/configure.ac +++ b/sim/iq2000/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog index 5aaab31..552e848 100644 --- a/sim/lm32/ChangeLog +++ b/sim/lm32/ChangeLog @@ -1,5 +1,11 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * sim-if.c (free_state, print_lm32_misc_cpu): Delete prototypes. (lm32_option_handler, OPTION_ENDIAN, lm32_options): Delete. (sim_open): Delete sim_add_option_table call. diff --git a/sim/lm32/arch.h b/sim/lm32/arch.h index b2ed4b2..720705a 100644 --- a/sim/lm32/arch.h +++ b/sim/lm32/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef LM32_ARCH_H #define LM32_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_LM32, MODEL_MAX diff --git a/sim/lm32/configure b/sim/lm32/configure index be10750..3968c92 100755 --- a/sim/lm32/configure +++ b/sim/lm32/configure @@ -12915,31 +12915,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12949,10 +12949,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13009,9 +13009,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13245,12 +13245,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/lm32/configure.ac b/sim/lm32/configure.ac index 764c611..90f5e2b 100644 --- a/sim/lm32/configure.ac +++ b/sim/lm32/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index 8b65bb9..7578315 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,5 +1,14 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + * traps-linux.c (conv_endian): Change LITTLE_ENDIAN to + BFD_ENDIAN_LITTLE. + (conv_endian16): Likewise. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * sim-if.c (sim_open): Delete #if 0 sim_add_option_table call. 2016-01-02 Mike Frysinger <vapier@gentoo.org> diff --git a/sim/m32r/arch.h b/sim/m32r/arch.h index 8341c4c..93e7e2e 100644 --- a/sim/m32r/arch.h +++ b/sim/m32r/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef M32R_ARCH_H #define M32R_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_M32R_D, MODEL_TEST, MODEL_M32RX, MODEL_M32R2 diff --git a/sim/m32r/configure b/sim/m32r/configure index 5c263da..8742adb 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -12920,31 +12920,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12954,10 +12954,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13014,9 +13014,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13250,12 +13250,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/m32r/configure.ac b/sim/m32r/configure.ac index d92e62b..68fb20d 100644 --- a/sim/m32r/configure.ac +++ b/sim/m32r/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/m32r/traps-linux.c b/sim/m32r/traps-linux.c index f266302..9220451 100644 --- a/sim/m32r/traps-linux.c +++ b/sim/m32r/traps-linux.c @@ -136,7 +136,7 @@ conv_endian (unsigned int tvalue) unsigned int hvalue; unsigned int t1, t2, t3, t4; - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { t1 = tvalue & 0xff000000; t2 = tvalue & 0x00ff0000; @@ -160,7 +160,7 @@ conv_endian16 (unsigned short tvalue) unsigned short hvalue; unsigned short t1, t2; - if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) + if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) { t1 = tvalue & 0xff00; t2 = tvalue & 0x00ff; diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog index 1df6810..fb9c4bc 100644 --- a/sim/m68hc11/ChangeLog +++ b/sim/m68hc11/ChangeLog @@ -1,3 +1,8 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * configure.ac: Change LITTLE_ENDIAN to BIG_ENDIAN. diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure index 3a277d1..df2d872 100755 --- a/sim/m68hc11/configure +++ b/sim/m68hc11/configure @@ -12955,31 +12955,31 @@ fi fi -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12989,10 +12989,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13049,9 +13049,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13285,12 +13285,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/m68hc11/configure.ac b/sim/m68hc11/configure.ac index cbfe9e8..aafbb31 100644 --- a/sim/m68hc11/configure.ac +++ b/sim/m68hc11/configure.ac @@ -7,7 +7,7 @@ SIM_AC_COMMON dnl Options available in this module SIM_AC_OPTION_INLINE() -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_WARNINGS diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index fb80f2c..ce99714 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,7 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * Makefile.in (SIM_OBJS): Delete sim-hload.o. diff --git a/sim/mcore/configure b/sim/mcore/configure index d46ffcb..3fd5d8c 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog index 9346778..3c21d5e 100644 --- a/sim/microblaze/ChangeLog +++ b/sim/microblaze/ChangeLog @@ -1,3 +1,7 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (sim_store_register): Rename to ... diff --git a/sim/microblaze/configure b/sim/microblaze/configure index d46ffcb..3fd5d8c 100755 --- a/sim/microblaze/configure +++ b/sim/microblaze/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index a77058e..ba0a50b 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,5 +1,12 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * configure.ac (mips_endian): Change LITTLE_ENDIAN to LITTLE. + (default_endian): Likewise. Change BIG_ENDIAN to BIG. + * configure: Regenerate. + * sim-main.h (BigEndianMem): Change BIG_ENDIAN to BFD_ENDIAN_BIG. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * dv-tx3904cpu.c (CPU, SD): Delete. 2015-12-30 Mike Frysinger <vapier@gentoo.org> diff --git a/sim/mips/configure b/sim/mips/configure index 6f1d136..c31d65e 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -13037,9 +13037,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13273,12 +13273,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi @@ -13426,14 +13426,14 @@ esac mips_endian= default_endian= case "${target}" in - mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;; - mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;; - mips64*-*-*) default_endian=BIG_ENDIAN ;; - mips16*-*-*) default_endian=BIG_ENDIAN ;; - mipsisa32*-*-*) default_endian=BIG_ENDIAN ;; - mipsisa64*-*-*) default_endian=BIG_ENDIAN ;; - mips*-*-*) default_endian=BIG_ENDIAN ;; - *) default_endian=BIG_ENDIAN ;; + mips64el*-*-*) mips_endian=LITTLE ;; + mips64vr*el-*-*) default_endian=LITTLE ;; + mips64*-*-*) default_endian=BIG ;; + mips16*-*-*) default_endian=BIG ;; + mipsisa32*-*-*) default_endian=BIG ;; + mipsisa64*-*-*) default_endian=BIG ;; + mips*-*-*) default_endian=BIG ;; + *) default_endian=BIG ;; esac wire_endian="$mips_endian" @@ -13441,26 +13441,26 @@ default_endian="$default_endian" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -13470,10 +13470,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13769,7 +13769,7 @@ if test ${sim_gen} = MULTI; then cat << __EOF__ > multi-run.c /* Main entry point for MULTI simulators. - Copyright (C) 2003-2015 Free Software Foundation, Inc. + Copyright (C) 2003-2016 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/sim/mips/configure.ac b/sim/mips/configure.ac index 7f04473..91e7b0c 100644 --- a/sim/mips/configure.ac +++ b/sim/mips/configure.ac @@ -37,14 +37,14 @@ AC_SUBST(SIM_SUBTARGET) mips_endian= default_endian= case "${target}" in - mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;; - mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;; - mips64*-*-*) default_endian=BIG_ENDIAN ;; - mips16*-*-*) default_endian=BIG_ENDIAN ;; - mipsisa32*-*-*) default_endian=BIG_ENDIAN ;; - mipsisa64*-*-*) default_endian=BIG_ENDIAN ;; - mips*-*-*) default_endian=BIG_ENDIAN ;; - *) default_endian=BIG_ENDIAN ;; + mips64el*-*-*) mips_endian=LITTLE ;; + mips64vr*el-*-*) default_endian=LITTLE ;; + mips64*-*-*) default_endian=BIG ;; + mips16*-*-*) default_endian=BIG ;; + mipsisa32*-*-*) default_endian=BIG ;; + mipsisa64*-*-*) default_endian=BIG ;; + mips*-*-*) default_endian=BIG ;; + *) default_endian=BIG ;; esac SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian) diff --git a/sim/mips/sim-main.h b/sim/mips/sim-main.h index b7e3072..0ea1234 100644 --- a/sim/mips/sim-main.h +++ b/sim/mips/sim-main.h @@ -592,7 +592,7 @@ struct sim_state { /* Hardware configuration. Affects endianness of LoadMemory and StoreMemory and the endianness of Kernel and Supervisor mode execution. The value is 0 for little-endian; 1 for big-endian. */ -#define BigEndianMem (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) +#define BigEndianMem (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) /*(state & simBE) ? 1 : 0)*/ /* ReverseEndian */ diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index d59a7e8..1d05f8d 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define. diff --git a/sim/mn10300/configure b/sim/mn10300/configure index 6e4246e..1fac8bf 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -12917,31 +12917,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12951,10 +12951,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13011,9 +13011,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13247,12 +13247,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/mn10300/configure.ac b/sim/mn10300/configure.ac index 037d405..7d3c223 100644 --- a/sim/mn10300/configure.ac +++ b/sim/mn10300/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_WARNINGS diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog index 439b69c..718e804 100644 --- a/sim/moxie/ChangeLog +++ b/sim/moxie/ChangeLog @@ -1,3 +1,8 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (sim_store_register): Rename to ... diff --git a/sim/moxie/configure b/sim/moxie/configure index 3232de3..6990a8f 100755 --- a/sim/moxie/configure +++ b/sim/moxie/configure @@ -13006,31 +13006,31 @@ fi -wire_endian="BIG_ENDIAN" +wire_endian="BIG" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -13040,10 +13040,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13100,9 +13100,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13336,12 +13336,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/moxie/configure.ac b/sim/moxie/configure.ac index 34b80ce..a7f2b82 100644 --- a/sim/moxie/configure.ac +++ b/sim/moxie/configure.ac @@ -7,7 +7,7 @@ SIM_AC_COMMON AC_CHECK_TOOL(DTC, dtc) -SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN(BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_ENVIRONMENT diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog index dd9aad0..db8269e 100644 --- a/sim/msp430/ChangeLog +++ b/sim/msp430/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-27 Mike Frysinger <vapier@gentoo.org> * msp430-sim.c (sim_dis_read): Change private_data to application_data. diff --git a/sim/msp430/configure b/sim/msp430/configure index 796741b..229096a 100755 --- a/sim/msp430/configure +++ b/sim/msp430/configure @@ -12918,31 +12918,31 @@ done -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi diff --git a/sim/msp430/configure.ac b/sim/msp430/configure.ac index f24480e..b896ce4 100644 --- a/sim/msp430/configure.ac +++ b/sim/msp430/configure.ac @@ -26,7 +26,7 @@ SIM_AC_COMMON AC_CHECK_HEADERS(getopt.h) -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT) SIM_AC_OPTION_INLINE SIM_AC_OPTION_WARNINGS diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index 0a0bb56..56e9f10 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,10 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + * interp.c (target_little_endian): Change LITTLE_ENDIAN to + BFD_ENDIAN_LITTLE. + (host_little_endian): Likewise. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (sim_store_register): Rename to ... diff --git a/sim/sh/configure b/sim/sh/configure index d46ffcb..3fd5d8c 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -12917,26 +12917,26 @@ default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13006,9 +13006,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/sh/interp.c b/sim/sh/interp.c index 3abeda6..f7c4948 100644 --- a/sim/sh/interp.c +++ b/sim/sh/interp.c @@ -116,10 +116,10 @@ struct loop_bounds { unsigned char *start, *end; }; /* These variables are at file scope so that functions other than sim_resume can use the fetch/store macros */ -#define target_little_endian (CURRENT_TARGET_BYTE_ORDER == LITTLE_ENDIAN) +#define target_little_endian (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE) static int global_endianw, endianb; static int target_dsp; -#define host_little_endian (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) +#define host_little_endian (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) static int maskw = 0; static int maskl = 0; diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog index 74f89bc..18a1d8a 100644 --- a/sim/sh64/ChangeLog +++ b/sim/sh64/ChangeLog @@ -1,5 +1,11 @@ 2016-01-02 Mike Frysinger <vapier@gentoo.org> + * arch.h (TARGET_BIG_ENDIAN): Delete. + * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG. + * configure: Regenerate. + +2016-01-02 Mike Frysinger <vapier@gentoo.org> + * sim-if.c (sim_open): Delete #if 0 sim_add_option_table call. 2016-01-02 Mike Frysinger <vapier@gentoo.org> diff --git a/sim/sh64/arch.h b/sim/sh64/arch.h index 88cd037..aaa3991 100644 --- a/sim/sh64/arch.h +++ b/sim/sh64/arch.h @@ -24,8 +24,6 @@ This file is part of the GNU simulators. #ifndef SH_ARCH_H #define SH_ARCH_H -#define TARGET_BIG_ENDIAN 1 - /* Enum declaration for model types. */ typedef enum model_type { MODEL_SH2A_NOFPU, MODEL_SH2A_FPU, MODEL_SH4_NOFPU, MODEL_SH4 diff --git a/sim/sh64/configure b/sim/sh64/configure index 6310f42..7c3b424 100755 --- a/sim/sh64/configure +++ b/sim/sh64/configure @@ -12919,30 +12919,30 @@ sim_link_links="${sim_link_links} targ-vals.def" wire_endian="" -default_endian="BIG_ENDIAN" +default_endian="BIG" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13012,9 +13012,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/sh64/configure.ac b/sim/sh64/configure.ac index c979458..4da1756 100644 --- a/sim/sh64/configure.ac +++ b/sim/sh64/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN([], BIG_ENDIAN) +SIM_AC_OPTION_ENDIAN([], BIG) SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_SCACHE(16384) diff --git a/sim/testsuite/ChangeLog b/sim/testsuite/ChangeLog index f790420..63ec3ed 100644 --- a/sim/testsuite/ChangeLog +++ b/sim/testsuite/ChangeLog @@ -1,3 +1,8 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * common/bits-gen.c (main): Change BIG_ENDIAN to BFD_ENDIAN_BIG and + LITTLE_ENDIAN and BFD_ENDIAN_LITTLE. + 2015-11-24 Nick Clifton <nickc@redhat.com> * configure: Regenerate. diff --git a/sim/testsuite/common/bits-gen.c b/sim/testsuite/common/bits-gen.c index 84e4372..6e7dd75 100644 --- a/sim/testsuite/common/bits-gen.c +++ b/sim/testsuite/common/bits-gen.c @@ -233,7 +233,7 @@ main (int argc, char *argv[]) printf ("#define WITH_TARGET_WORD_BITSIZE %d\n", bitsize); printf ("#define WITH_TARGET_WORD_MSB %d\n", msb); printf ("#define WITH_HOST_WORD_BITSIZE %d\n", sizeof (int) * 8); - printf ("#define WITH_TARGET_BYTE_ORDER %s\n", big_endian ? "BIG_ENDIAN" : "LITTLE_ENDIAN"); + printf ("#define WITH_TARGET_BYTE_ORDER %s\n", big_endian ? "BFD_ENDIAN_BIG" : "BFD_ENDIAN_LITTLE"); printf ("\n"); printf ("#define SIM_BITS_INLINE (ALL_H_INLINE)\n"); printf ("\n"); diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index 2b66488..d21492b 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,9 @@ +2016-01-02 Mike Frysinger <vapier@gentoo.org> + + * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to + LITTLE. + * configure: Regenerate. + 2015-12-30 Mike Frysinger <vapier@gentoo.org> * wrapper.c (v850_reg_store, v850_reg_fetch): Define. diff --git a/sim/v850/configure b/sim/v850/configure index 97113c3..c1e449a 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -12911,31 +12911,31 @@ sim_link_links="${sim_link_links} targ-vals.def" -wire_endian="LITTLE_ENDIAN" +wire_endian="LITTLE" default_endian="" # Check whether --enable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then : enableval=$enable_sim_endian; case "${enableval}" in - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";; yes) if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else - if test x"$default_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else echo "No hard-wired endian for target $target" 1>&6 - sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; no) if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else echo "No default endian for target $target" 1>&6 - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi;; *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";; @@ -12945,10 +12945,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then fi else if test x"$default_endian" != x; then - sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}" else if test x"$wire_endian" != x; then - sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}" else sim_endian= fi @@ -13005,9 +13005,9 @@ fi # Check whether --enable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then : enableval=$enable_sim_hostendian; case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";; *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then @@ -13241,12 +13241,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h esac if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG" else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE" fi else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN" fi fi diff --git a/sim/v850/configure.ac b/sim/v850/configure.ac index 1471eeb..0ac54e0 100644 --- a/sim/v850/configure.ac +++ b/sim/v850/configure.ac @@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4) SIM_AC_COMMON -SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ENDIAN(LITTLE) SIM_AC_OPTION_ALIGNMENT(,NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_WARNINGS |